Log in

Relevant bibliographies by topics / Feeding machine design / Journal articles

To see the other types of publications on this topic, follow the link: Feeding machine design.

Journal articles on the topic 'Feeding machine design'

Author: Grafiati

Published: 28 June 2021

Last updated: 14 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Feeding machine design.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Chen, Shao Ke. "Control System Design of Automatic Feeding Machine." Applied Mechanics and Materials 157-158 (February 2012): 466–71. http://dx.doi.org/10.4028/www.scientific.net/amm.157-158.466.

Full text

Abstract:

The research of the control system of automatic feeding machine in the present paper can be applied in different mechanical designs – from simple key-press input of cycling days, multiple time intervals and the feeding amount to setting steps of numbers of stepping motor via the control of SMC by time setting. This not only realizes the objective of “fixed-time” and “fixed-quantity” feeding, but also solves the problems of serious leaking, high failure rate, and loud noises during the process of using warehouse-type feeding machines, which brings favorable economic and social benefits for enterprises.

APA, Harvard, Vancouver, ISO, and other styles

2

M. B, Mirza. "Design of Automatic Seed Feeding Machine." International Journal for Research in Applied Science and Engineering Technology 5, no. II (February 7, 2017): 66–75. http://dx.doi.org/10.22214/ijraset.2017.2010.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Sukor, Mohd Azizee, S. M. Salleh, A. H. M. Yusoff, W. M. A. W. Mahmud, S. Ahmad, and S. Mahzan. "Design Improvement of an Automatic Fish Feeding Machine." Journal of Computational and Theoretical Nanoscience 17, no. 2 (February 1, 2020): 1183–88. http://dx.doi.org/10.1166/jctn.2020.8786.

Full text

Abstract:

This study is about the design improvement of an automatic fish feeding machine. The most recent machine has been selected as the point of reference for this research. Realizing the limitation of existing automatic fish feeding machine has inspired the researcher to develop a system which overcomes previous systems’ flaws, hence giving more advantages and benefits to the owner and workers. This research has three main goals: To design and fabricate automatic fish feeding machine; to ensure an accurate amount of fish pellet to be dispersed at a predetermined time, 360° and at specified distance; and to generate electricity by using the solar panel as the power source to make it suitable for outdoor environment of fish farming. We developed a prototype to measure the ability of the new automatic machine concept. These include design improvement, storage capacity, ability and time for a pellet to dispense and the distance of food dispersed. The findings from the research showed that the use of vibration concept and gravity to channel down the fish pellet into the distribution channel has made this new design simpler. Also, the centrifugal force concept to disperse the pellet 360° is a major improvement from the previous design. Three projection angles of 0°, 15° and 30° were studied. Although the current study is based on a small sample, the findings suggest that the projection angle at 15° is the best for the current machine. We conclude that the new fish feeding machine has exceeded the performance of the previous machine in terms of functionality and design. However, with a small sample size, caution must be applied, as the finding might not be transferable to a large-scale fish farm environment. Several possible future studies using the same experiment set up are apparent.

APA, Harvard, Vancouver, ISO, and other styles

4

Channapur, Sharif C., Sagar G. Upanal, Nagendra S. Hadimani, Arunkumar Megur, and Karthik A S. "Design concept of fertilizer feeding and spraying machine." International Journal of Futures Research and Development 01, no. 02 (2020): 38–43. http://dx.doi.org/10.46625/ijfrd.2020.1205.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Sun, Qiu Yan, Dong Chun Zhang, Yu Cheng, and Xin Yue Li. "Design Research on Feeding Paper Machine of Printing Press." Advanced Materials Research 418-420 (December 2011): 1944–47. http://dx.doi.org/10.4028/www.scientific.net/amr.418-420.1944.

Full text

Abstract:

The article introduces each component of feeding paper machine of printing press which are press feet mechanism, paper separation mechanism and paper transfer mechanism, the function and the principle of work. Each mechanism is undertook a variety of designs and we choose the best design of each structure according to its functions. Design adopted is as follows: Press feet mechanism adopts the cam-linkage mechanism; Paper separation mechanism adopts the cam-linkage slider mechanism; Paper transfer mechanism adopts the conjugate cam-linkage slider mechanism. The machine is simple, practical and reliable.

APA, Harvard, Vancouver, ISO, and other styles

6

Xie, Run, Ji Fei Cai, and Jia Cong Chen. "Optimization Design of Feeding Unit of the Forward Type Flute Laminating Machine." Applied Mechanics and Materials 312 (February 2013): 106–9. http://dx.doi.org/10.4028/www.scientific.net/amm.312.106.

Full text

Abstract:

For paper forward unit of the current forward type flute laminating machine, the contact surface of the paper forward unit may damage paper during high speed paper forwarding. In view of this phenomenon, a solution is proposed through the study on the feeding unit of the flute laminating machine. In this paper, the corresponding sprocket driveshaft is controlled by a servo motor to slowly forward paper at the beginning and accelerate its forwarding speed gradually, until the entire feeding process is completed. In this way, the problem of paper pile-up and damages during the paper forwarding process can be solved, while matching backing paper feeding, so as to improve the feeding accuracy of the full-automatic flute laminating machine and hence its laminating accuracy.

APA, Harvard, Vancouver, ISO, and other styles

7

Yang, Wei Min, Shu Xia Zhao, Peng Fei Zheng, and Zhong Xing Lou. "Design of a Kind of Drilling Machine for Semicircle Shaft." Advanced Materials Research 605-607 (December 2012): 328–31. http://dx.doi.org/10.4028/www.scientific.net/amr.605-607.328.

Full text

Abstract:

The central shaft of floor strainer are composed of two semicircle shafts, which is made manually now. An automatic drilling machine is researched in this paper, which can sequence and feed workpiece, positioning automatically and feed automatically when drilling. The sequencing and feeding are implemented by vibration disk. The automatic positioning is implemented by Index Man and positioning disc. The feeding mechanism is executed by pneumatic device and its control system.

APA, Harvard, Vancouver, ISO, and other styles

8

Wang, Jian Jun, Hui Fang Gao, and Li Yang Cai. "The Control System Design for a Feeding Machine in Farms." Applied Mechanics and Materials 722 (December 2014): 266–70. http://dx.doi.org/10.4028/www.scientific.net/amm.722.266.

Full text

Abstract:

The control system design for a Feeding Machine in Farms is introduced in this paper, it consists of PLC, MCGS touch screen, monitoring computer, wireless communication module, etc. This paper introduces in detail the system's hardware and software design. The system has characteristics of easy operation, stable running and high reliability.

APA, Harvard, Vancouver, ISO, and other styles

9

Hou, Jun Ming, De Xu Yang, Yan Tao Qu, and Lian Xing Gao. "Parametric Design of Grid Plate Type Peanut Picking Machine." Applied Mechanics and Materials 380-384 (August 2013): 87–90. http://dx.doi.org/10.4028/www.scientific.net/amm.380-384.87.

Full text

Abstract:

According to the design theory, two section type peanut harvesting characteristics is studied. A suitable northeast harvesting peanut picking machine is developed. It is applied with half feeding form according to the Liaoning advocate. A division 'Tangyou' series peanut harvesting style is applied for the design. The calculation of correlative parameters is made, the organization form defined, and the main structure was analyzed. The results show that the design of machines meets the peanut picking requirements. And in the fruit picking process to achieve the low damage rate, it can completely adapt to the requirements of the rural northeast.

APA, Harvard, Vancouver, ISO, and other styles

10

Yuan, Jianjun, Weijun Zhang, and Qiang Li. "The Reliable Design and Implementation of an Automatic Glass Furnace Feeding Robot for the SME Glass Industry." International Journal of Automation Technology 6, no. 1 (January 5, 2012): 53–59. http://dx.doi.org/10.20965/ijat.2012.p0053.

Full text

Abstract:

This paper is a technical report which discusses a selfdeveloped automatic robot (machine) for glass furnace feeding. It was designed for use in a small-scale glass industry, in which most factories are still feeding small, old fashioned furnaces manually. The huge robot discussed in this paper is intended to substitute for exhausted workers. It was designed with four degrees of freedom and a planar manipulator structure, including X-axis and Y-axis translations, Z-axis rotation, and a belt scrolling motion for feeding the granular glass material into the furnace. The development and implementation of the mechanical and control systems are analyzed, including design considerations, motion using the teaching playback method, and feeding path planning. To ensure system safety and reliability, the necessity and the design of a redundant control systemare presented. Finally, the feeding quantity and quality control are discussed. Unlike other feeding machines, the robot fully utilizes robotic control components and technologies, which is considered another approach to real robotics application.

APA, Harvard, Vancouver, ISO, and other styles

11

Yang, Jiaqi, Jirong Wang, Jun Li, Lianwen Shi, and Xiangwu Dai. "Optimum Design of Multidischarge Outlet Biomass Briquetting Machine." Complexity 2020 (October 22, 2020): 1–8. http://dx.doi.org/10.1155/2020/8818632.

Full text

Abstract:

A high-efficiency biomass material was designed according to the densification mechanism of biomass. This machine improved the efficiency by recombining the feeding stage, prepressing stage, compaction stage, pressure-holding stage, and pushing stage of the compression process, so that part of the working stages was carried out simultaneously. To further improve efficiency and rationally allocate power at each stage, in this paper, we established a mathematical model for the machine. We use the nonlinear programming in Matlab (2016b) to solve the minimum value of the model, making the machine work time the shortest.

APA, Harvard, Vancouver, ISO, and other styles

12

Zhang, Yi Hua, Pei Hai Hou, Tie Qun Duan, Yuan Gao, Hui Min Han, and Zhen Qi Yang. "The Analysis of Feeding Crossbeam on the Automatic Aluminous-Winding Machine." Advanced Materials Research 748 (August 2013): 336–40. http://dx.doi.org/10.4028/www.scientific.net/amr.748.336.

Full text

Abstract:

The feeding crossbeam on the automatic aluminous-winding machine plays a supporting role in the preparation process of feeding pipe, the deformation of the feeding crossbeam have a direct impact on mechanical accuracy, it is difficult problem in model design, which is how to design a reasonable structure and make the crossbeam meets the requirements of strength and stiffness, as well achieve lightweight design. This article considers the complex force of crossbeam, and bases on the principle of virtual work and finite element theory, using ANASYS software to make a finite element model, the relation curves of the stress and the strain under the maximum load are summarized and the stress concentration area is found, The current study provides more reliable results to improve design.

APA, Harvard, Vancouver, ISO, and other styles

13

Yu, Xin Qi, Hui Qin Gao, Qing Gang Liu, and Jia Hui Yu. "Structural Design of the Circular Mold Briquetting Machine." Applied Mechanics and Materials 71-78 (July 2011): 2501–4. http://dx.doi.org/10.4028/www.scientific.net/amm.71-78.2501.

Full text

Abstract:

This paper describes the significance of exploiting and developing renewable energy under the current circumstance of fossil energy shortage. The paper introduces the working principle and the overall structure of the circular mold briquetting machine. In the transmission and feeding mechanism, the “one shaft” structure is used. The “Double-roller” is symmetrically arranged in the compression chamber, and the combination circular mold is adopted. It is shown in the structural analysis that the briquetting machine is of simple structure, high work efficiency, and low cost. Moreover, it can be conveniently repaired and replaced. The structural analysis provides significant theoretical basis for the optimal design of the briquetting machine.

APA, Harvard, Vancouver, ISO, and other styles

14

Pan, Li Ai, Xian Chun Cheng, and Ning Ding. "Structural and Shaping Design of Centerless Cylindrical Grinding Machine Based on CAD." Advanced Materials Research 602-604 (December 2012): 1749–52. http://dx.doi.org/10.4028/www.scientific.net/amr.602-604.1749.

Full text

Abstract:

In this paper, according to the requirements of the topic, through the large market research and a series of calculation, I design the requirements of the grinding wheel frame and the spindle. In combination with relevant patent reform on the basis of grinding machine, The guide part of the drive system, micro feeding and automatic feeding mechanism is analyzed and design calculation, so that the machine can greatly reduce the labor intensity of workers and improve the processing accuracy. On this base of the design, I design and select the suitable rail to guarantee the processing precision and the wheel frame seat movement accuracy by using the calculated data and shape dimensions. At last, I design structural and shaping of the centerless cylindrical grinding machine.

APA, Harvard, Vancouver, ISO, and other styles

15

Yu, Xin Qi, Zhi Xu, Qing Gang Liu, Yu Fei Zhao, Pei Ying Peng, and Zhao Zhang. "Structure Analysis of Toss Feeding Stalk Baler." Applied Mechanics and Materials 741 (March 2015): 75–79. http://dx.doi.org/10.4028/www.scientific.net/amm.741.75.

Full text

Abstract:

In this paper, the entire structure and operating principles of the toss feeding typed stalk baler are introduced. The baler is mainly consisted of collecting, feeding, compression and knotting component. A Y-shaped straw chopper blade is used in the collecting. A combination component of auger and toss machine is adopted in the feeding system. The sliding block of compressor is driven by rod-crank mechanism. Structure analysis shows that the toss feeding typed straw baling machine has advantages of simple structure, high efficiency and low manufacturing cost. At the same time, the structural analysis provides an important theoretical basis for further optimal design of baling machine.

APA, Harvard, Vancouver, ISO, and other styles

16

Zha, Chang Li, and Fang Zhu. "Automatic Feeding System Design of Mill Based on PLC." Applied Mechanics and Materials 475-476 (December 2013): 680–84. http://dx.doi.org/10.4028/www.scientific.net/amm.475-476.680.

Full text

Abstract:

The feeding system is an important part of the mill, which is also the main factor that influenced flour efficiency and quality of mill. Designed a kind of automatic feeding system of mill based upon FX2N-series PLC as the core controller, vector universal inverter of INVT to drive , Real-time detection of material position of ultrasonic technology and HT7000-series HMI of Hollysys to Man-machine interface, and better solution to the problem of real-time and accuracy of the feeding quantity. The practical operation shows that the system has the characteristics of high precision, good reliability, easy operation etc.

APA, Harvard, Vancouver, ISO, and other styles

17

Guo, Han, and Yan Ma. "Design and Testing of the Precise Cutting Test Bed for Micron Paring Machining." Advanced Materials Research 538-541 (June 2012): 1290–93. http://dx.doi.org/10.4028/www.scientific.net/amr.538-541.1290.

Full text

Abstract:

The test bed for micron paring machining is a kind of Computer numerical control (CNC) carpentry test beds. Movement of machine is controlled automatically according to processing instructions, machining of different raw materials can be realized by simply changing the processing instruction program. The test bed’s precision and its persistence are mainly guaranteed by the lathe bed, and have an air clamping device and its feeding mechanism includes a stepper motor for CNC feeding. At the end of the thesis, the conclusion of experiment presents widths of micron parings machined by cutting lengthways along the grain fall between 50~150 µm. With further analysis, around 72% of the parings are 60~100 µm thick, around 75% are 5~8 mm wide, around 78% are 65~75 mm long. The results show micron parings machined by the specialised test bed meet the design requirements for micron parings.

APA, Harvard, Vancouver, ISO, and other styles

18

Feng, Tian, and Li Guangpeng. "Design of Intelligent Feeding Control System Based on S7-1200 PLC." E3S Web of Conferences 245 (2021): 01051. http://dx.doi.org/10.1051/e3sconf/202124501051.

Full text

Abstract:

In order to satisfy the needs of pig breeding, an intelligent feeding control system based on S7 1200PLC is designed in this paper. The design scheme selects Siemens S7-1200 PLC as the main controller and MCGS TPC7062TI touch screen as the man-machine interface. The article has carried on the electrical design, including I/O address allocation, the main circuit design, the control circuit design and so on, and has written the PLC control program in the debugging mode and the operation mode, finally has designed the man-machine interface to realize the configuration of the system using MCGS. After the actual operation, the system runs stably, safely and reliably, has achieved the expected goal, and has a certain prospect of popularization and application.

APA, Harvard, Vancouver, ISO, and other styles

19

Wang, Xiao Hua, Yuan Sheng Qi, and Yue Teng Li. "The Application of Virtual Design on Feeding Device of Precoated Laminating Machine." Advanced Materials Research 765-767 (September 2013): 116–19. http://dx.doi.org/10.4028/www.scientific.net/amr.765-767.116.

Full text

Abstract:

In the drive of market demand, postpress equipments developing rapidly. Because of environmental protection and energy saving, pre-coating technology has broad application prospects. But in China, the design of the machine are mostly generic and doesnt have a set of perfect design theory. There is no design innovation from the source. Using virtual prototype technology, the structural design of the key components of the pre-coated laminating machine to the paper feed mechanism is improved. Through the three-dimensional modeling, assembly and disassembly, adjustment mechanism simulation, motion simulation of mechanism, the physical, mechanical performance analysis, simulation, prediction, realizes fast implementation and optimization design, improves the processing and assembly technology.

APA, Harvard, Vancouver, ISO, and other styles

20

Xiao, Yanjun, He Zhang, Rui Liu, Yuxiang Liu, and Yongcong Li. "Control System Design for Feeding Machine of Sound Absorption Board Production Line." Open Mechanical Engineering Journal 9, no. 1 (June 26, 2015): 388–94. http://dx.doi.org/10.2174/1874155x01509010388.

Full text

Abstract:

This paper introduces a kind of mechanical structure and its control system, with which granular materials can be put into mould with a higher leveling status, the mechanical structure adopts split type arrangement, its function is to achieve the material removal and scraping, its control system is composed of a plurality of Mitsubishi PLC using masterslave control method. The mechanism and control methods can be widely applied in automatic production lines, which needs granular material into the mould quantitatively and passively wiped flatly.

APA, Harvard, Vancouver, ISO, and other styles

21

Chen, Guang Feng, Lin Lin Zhai, Kun Zou, Yi Yang, and Wei Bin Wang. "Design of CAN-Bus Based Yarn Feeding Control System for Carpet Tufting Machine." Advanced Materials Research 459 (January 2012): 275–79. http://dx.doi.org/10.4028/www.scientific.net/amr.459.275.

Full text

Abstract:

This paper proposed a CAN-bus and stepper motor based yarn feeding control system for tufting carpet machine. Base on requirement of yarn feeding devise control system architecture. Control system adopts the industrial computer as the master platform and user interface, the lower computer consists of yarn feed step motor controller, speed synchrony controller and yarn guiding controller. Design the communication protocol and the control logic. Through establishing control system prototype system to verify the system function, test results show that the design scheme is feasible

APA, Harvard, Vancouver, ISO, and other styles

22

Zhang, Xue Dong, and Shu Zhong Lin. "The Improved Design for Automatic Feeding Mechanism of the Injection Molding Machine for the Negative Electrode Shell of Li/Mn02 Button Cell Battery Based on TRIZ Confliction Theory." Advanced Materials Research 591-593 (November 2012): 152–57. http://dx.doi.org/10.4028/www.scientific.net/amr.591-593.152.

Full text

Abstract:

According to the existing problems of the automatic feeding mechanism of the injection molding machine, we used TRIZ confliction theory to improve the design. We installed original mention feeding platform on the shock hopper directly, raised the height of the cover and removed the gliding path to solve the problems of equipment which is need to be improved such as maintenance, debugging difficulties, which are maybe lead to instability of the equipment operation. This improvement not only simplifies the structure of the automatic feeding mechanism of the injection molding machine, but also reduces the cost. The automatic feeding mechanism of the injection molding machine, replacing a person, has improved the efficiency and reduced the cost of the button cell battery.

APA, Harvard, Vancouver, ISO, and other styles

23

Lin, Jia Horng, Wen Hao Hsing, Ching Wen Lin, Chien Teng Hsieh, Wen Tai Cho, and Ching Wen Lou. "Manufacturing Design of the Novel Multi-Layer Blending Machine." Advanced Materials Research 233-235 (May 2011): 3023–26. http://dx.doi.org/10.4028/www.scientific.net/amr.233-235.3023.

Full text

Abstract:

In this study, a multi-layer blending machine was designed to mix cotton evenly. Being put inside via the feeding port, cotton was spread evenly by the oscillator which moves from left to right back and forth successively. Subsequently, cotton was stored as the multi-layer fibrous cotton in the rear reserve tank. Delivered by the first and the second conveyer belt, the fibrous cotton was sent to the front storage chamber to be cut by a lattice which pulled and dragged the marching cotton vertically. Finally, the processed cotton was rolled out by a striper roller, falling at a certain spot as scheduled, after which spread and blended evenly and thoroughly.

APA, Harvard, Vancouver, ISO, and other styles

24

Luo, Bing Yang, Fan Du, and Yi Min Mo. "Design of the Proportional Feeding System of Raw Mill." Advanced Materials Research 201-203 (February 2011): 1586–89. http://dx.doi.org/10.4028/www.scientific.net/amr.201-203.1586.

Full text

Abstract:

A raw mill’s production line is to grind the raw material mixed with limestone, clay and basalt of certain proportion; it decides the quality of the cement clinker. The production efficiency and quality can be promoted by precisely controlling the proportion of the three raw materials and feeding automatically. The system’s controller is S7-400, and the measurement is done by the rotor scale produced by SHENCK. The variable speed device (VSD) of the feeder was controlled by the flow through the PID controller to realize the precise proportion. Moreover, the proportion can be set and the feeding quantity, the producing process can be monitored by the position machine (Win CC), to achieve production automation.

APA, Harvard, Vancouver, ISO, and other styles

25

Arditya, Ilham, Tri Ari Setyastuti, Fikri Islamudin, and Iskandar Dinata. "Design of Automatic Feeder for Shrimp Farming Based on Internet of Things Technology." International Journal of Mechanical Engineering Technologies and Applications 2, no. 2 (July 2, 2021): 145. http://dx.doi.org/10.21776/mechta.2021.002.02.8.

Full text

Abstract:

<p class="02abstracttext">In shrimp farming, feeding is an important activity to achieve good shrimp growth. Manual feeding manually using hand is less effective due to unequal food distribution. Thus, an automatic feeder is required to dispense feed at predetermined time. The advantages of automatic feeder are cost-effective, low labour requirement, and can be applicable for large volumes of feed. Design of automatic feeder machine can influence the capacity and time controlling of the feeder. In this research, the automatic feeder was designed using a controlling time system based on Internet of Things (IoT) technology. During plant trial, The automatic feeding was scheduled at 7 am, 11 am, 4 pm, and 8 pm. This machine could throw shrimp food homogeneously up to 10 m far for 2,500 m<sup>2</sup> pond area. In shrimp farming, distribution of shrimp food in predetermined time becomes an important rule to achieve good shrimp growth.</p>

APA, Harvard, Vancouver, ISO, and other styles

26

Wang, Li Hua, and Xiao Qiang Wu. "The Design of Control System of Piston Pin Punching Recess Automatic Drilling Dedicated Machine Tool." Applied Mechanics and Materials 651-653 (September 2014): 895–98. http://dx.doi.org/10.4028/www.scientific.net/amm.651-653.895.

Full text

Abstract:

The piston pin punching recess automatic drilling machine tool, is a dedicated machine tool designed and manufactured to solve the possess of piston pin punching recess. This paper studies the design of the dedicated machine’s control system, which uses open CNC technology, hydraulic technology, PLC technology, electrical technology, and human-machine interface technology. The control system can achieve the automation of feeding and blanking process. Replace of control panel, adopting touch screen to achieve operational control, and monitor the status of real-time job on the machine.

APA, Harvard, Vancouver, ISO, and other styles

27

Pan, Li Ai, Qiu Lei Du, and Yan Li Wu. "Improving Design of Cup Conveying Part for Sealing Machine Based on PLC." Advanced Materials Research 989-994 (July 2014): 2913–16. http://dx.doi.org/10.4028/www.scientific.net/amr.989-994.2913.

Full text

Abstract:

In order to improve the sealing quality and reduce the labor intensity of people, the stepping motors have been adopted in the salver mechanical transmission part and sealing part of the original sealing machine. In the paper, salver feeding and control system of sealing machine have been designed. The results have been obtained such as control principle diagram of the control system, equivalent circuit diagram and outer wiring diagram of PLC and PLC control program. It can realize the automatic control of the sealing machine. Improved sealing machine has the characteristic of simple mechanical transmission parts, advanced control system, small human error, low fault rate and easy operation.

APA, Harvard, Vancouver, ISO, and other styles

28

Zeng, Min, Guang Hui Chen, Liang Hong Wei, and Shi Ming Cui. "Control System Design of a Novel Fan Shaft Sleeve Automatic Processing Machine." Advanced Materials Research 422 (December 2011): 70–74. http://dx.doi.org/10.4028/www.scientific.net/amr.422.70.

Full text

Abstract:

The fan shaft sleeve is a very important part of the fan-related machine and has high demand for precision. At present, due to the lack of machine that exclusively for sleeve processing at home, the sleeve production largely depends on manual labor which yields very low productivity. This paper introduces an automatic machine for fan shaft sleeve processing which introduces the Omron PLC as the hardcore of the control system. The machine proposed also includes a cam splitter. Controlled by motors, clutches and retarders, the splitter provides 6 stations for feeding, drilling, taping, milling, chamfer and discharging. Driven by 3 phases AC motors and air tanks, the machine can mange the fan shaft sleeve processing automatically and achieves high productivity and quality.

APA, Harvard, Vancouver, ISO, and other styles

29

Chen, Guang Feng, Lin Lin Zhai, Kun Zou, Yi Yang, and Wei Bin Wang. "Design of CAN-Bus Based Yarn Feeding Control System for Carpet Tufting Machine." Advanced Materials Research 459 (January 2012): 275–79. http://dx.doi.org/10.4028/scientific5/amr.459.275.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Yan, Tao, Gui Qin Jin, and Ze Ding Wei. "Design and Implementation of Software for Quartz Crystal Feeding System." Applied Mechanics and Materials 722 (December 2014): 243–46. http://dx.doi.org/10.4028/www.scientific.net/amm.722.243.

Full text

Abstract:

The paper mainly introduced the working process of automatic feeding system for quartz crystal laser marking, elaborated the human-computer interaction and control software design and implementation. System used double CPU system to control the mechanical parts movement and to send the laser marking control signal, and to conduct the man-machine dialogue. At first, the system realized the main function such as structured programming, reasonable allocation of system resources, and the software anti-interference design. Eventually system realized the automatic feeding and laser marking of quartz crystal, and was favorable to the effective management of the equipment operation personnel, and to meet the requirements of the user.

APA, Harvard, Vancouver, ISO, and other styles

31

Ghani, Usman, Mubashir Hayat, Tufail Habib, Alam Zeb, and Khizar Azam. "Design and fabrication of high productive barbecue machine." International Journal of Engineering & Technology 9, no. 2 (July 1, 2020): 572. http://dx.doi.org/10.14419/ijet.v9i2.30735.

Full text

Abstract:

Conventional methods to use a metal cavity having charcoal assisted with skewers in getting the final barbecue encounter a lot of limitations such as time, lower productivity, single temperature heating, worker fatigue, controlling of heat and time, energy consumption, importability, unhygienic food preparation (road-side open barbecuing) and cost-effectiveness etc. The proposed research considers the design and fabrication of barbecue machine fueled with gas and actuated by electrical cum mechanical systems. This electromechanical semi-automatic barbecue machine overcomes the stated limitations. It will be an important tool used for household as well as commercial use. This machine capacity is to barbecue an average of 4.5 kg of meat at a time. The machine is divided into three chambers. In first chamber barbecue is kept on lower temperature for high time. Once it completes its first stage motor attached with chain drive mechanism is activated and it brings the food to second chamber. In the second chamber, it takes lower time on high temperature and when it finishes it is conveyed to first chamber for un-feeding. The aim of this research is also to commercialize the product in the market targeting small scale industries and people involved in road side barbecue production, restaurants and other organizations.

APA, Harvard, Vancouver, ISO, and other styles

32

KIRSANOV, VLADIMIR V., DMITRIY YU PAVKIN, EVGENY A. NIKITIN, and IGOR M. DOVLATOV. "METHODOLOGY FOR OPTIMIZING THE PARAMETERS OF MACHINE FEEDING OF CATTLE." Agricultural engineering, no. 1 (2021): 10–14. http://dx.doi.org/10.26897/2687-1149-2021-1-10-14.

Full text

Abstract:

The authors propose a methodology for determining technological parameters for the machine implementation of the preparation and distribution of feed mixture at cattle breeding facilities. The proposed methodology can be used to determine the optimal ratio parameters of the number of technical means for preparing a feed mixture and the number of operations performed for feeding cattle with multi-component feed mixtures. It was developed taking into account livestock breeding requirements and standards. The authors present an analysis that takes into account the European, Russian and American experience of the technology of organizing cattle feeding. This methodology applies to facilities (a farm) practicing year-round keeping of animals, where a concrete feed table is mounted in the same plane with the passage for technical equipment: a tractor, an aggregated or self-propelled mixer dispenser, as well as an auxiliary technical means – a feed pusher or its substitute attachments on the tractor. The feed mixture is dispensed on both sides. Taking into account the strategy of organizing the technological process of cattle feeding, the proposed method allows determining the optimal construction parameters of livestock facilities at the design stage, as well as the number and productivity of the machines used.

APA, Harvard, Vancouver, ISO, and other styles

33

Feng, Shu Min. "Design and Implementation of the Working Order for a PLC Controlled Terminal Cutting Machine." Applied Mechanics and Materials 121-126 (October 2011): 768–72. http://dx.doi.org/10.4028/www.scientific.net/amm.121-126.768.

Full text

Abstract:

Terminal cutting machine is an automatic device that can realize automatic feeding, bending, cutting the middle carry, shearing. It can be easily integrated with other automatic devices to form a whole production line. In this paper, the cam mechanism is used to realize bending and cutting the middle carry, hydraulic drive structure is used to realize terminal feeding and cutting. A reasonable working time sequence among various processes is necessary to ensure the right working order and avoid the interference. The point of the control is to know which processing step it is by using photoelectric sensors to detect several key positions of the cam. The detecting signal is received by the PLC and hence from there to control all processing steps executed in an ordered and cyclic matter. The timing sequence solution introduced in this paper has been successfully implemented in a terminal cutting machine.

APA, Harvard, Vancouver, ISO, and other styles

34

Xiao, Yanjun, He Zhang, Rui Liu, Yuxiang Liu, and Yongcong Li. "Retraction Notice: Control System Design for Feeding Machine of Sound Absorption Board Production Line." Open Mechanical Engineering Journal 10, no. 1 (May 11, 2016): 96. http://dx.doi.org/10.2174/1874155x01610010096.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Xiao, Yanjun, He Zhang, Rui Liu, Yuxiang Liu, and Yongcong Li. "Retraction Notice: Control System Design for Feeding Machine of Sound Absorption Board Production Line." Open Mechanical Engineering Journal 10, no. 1 (May 11, 2016): 96. http://dx.doi.org/10.2174/1874836801610010096.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Wang, Ya Ping, Ge Li, Lei Gao, Dong Yao Liu, Chang Xuan Shi, and Wen Yue Yuan. "Mechanical Design and Simulation Analysis of Finned Tube Winding Machine for Assembly." Key Engineering Materials 621 (August 2014): 215–20. http://dx.doi.org/10.4028/www.scientific.net/kem.621.215.

Full text

Abstract:

With the increasing of market demand for finned tube and fin tube processing equipment in China continued to deepen, the problems of the inefficient study design a new type of finned tube winding machine in order to solve the traditional winding machine problem such as low efficiency and the unstable quality. Using a design method for assembly , complete design parameters to calculate the main structure of the feeding and winding device and implementing the device on three dimensional Assembly based on CATIA modeling process. Finally, to verify the overall structural design rationality, we have created a virtual prototype of finned tubes and motion simulation and the collision detection also be done.

APA, Harvard, Vancouver, ISO, and other styles

37

Ren, Xian Ke, Dong Ming Li, Hang Zhang, and Yun Xian Cui. "Automatic Sorting Machine for Cylinder Length." Advanced Materials Research 706-708 (June 2013): 1222–25. http://dx.doi.org/10.4028/www.scientific.net/amr.706-708.1222.

Full text

Abstract:

In order to resolve the problem that is low precision, slow speed and time consuming, which come out when selecting by artificial. This paper developed an automatic selection machine of cylinder length, which use advanced PLC controller to take the place of conventional mechanical control type. Moreover, it employs synchronous controllable automatic loading and automatic material distribution mechanism, greatly improved control precision and efficiency. Save production cost due to use contacting sensors. Rotary disk type and feeding integral type design pattern reduce the complex of mechanism, and selection speed can reach 120-200 every minute, it realizes the purpose of accuracy and fast.

APA, Harvard, Vancouver, ISO, and other styles

38

Li, Xiaoxing, Yi-Hua Fan, Ching-En Chen, Chia-Hui Tsao, Yu-Ming Chen, and Sheng-Chung Hsieh. "DEVELOPMENT OF AN AUTOMATIC MEASUREMENT AND MATCHING MACHINE FOR COLUMNED BATTERY CELLS." Transactions of the Canadian Society for Mechanical Engineering 40, no. 5 (December 2016): 693–701. http://dx.doi.org/10.1139/tcsme-2016-0056.

Full text

Abstract:

An automatic measurement and matching machine for columned batteries is developed in this study. The automatic machine consists of a battery feeding case, an intermittent separation feeding mechanism, a test region, eight classification transport channels, and battery depositary boxes. Besides the mechanism design, a human-machine interface and control program are written in VB language. The program provides the control and monitoring program for the auto-measurement system. The program cannot only read the measurement data and control the automatic machine, but also store these data and provide the test data histories for each cell supplier to the user. The experimental results show that the automatic machine could examine and classify the columned battery cells efficiently and decrease the demand of manpower. The results also show that the total measured and sorting quantity of one machine for eight hours is about 5760 pieces, which is greater than the 3500 pieces measured by one manpower.

APA, Harvard, Vancouver, ISO, and other styles

39

Zhao, Man Quan, Hai Qing Tian, and Lin Li. "Parameters Design and Performance Study of Fly-Wheel Type Cutter Machine." Advanced Materials Research 339 (September 2011): 656–61. http://dx.doi.org/10.4028/www.scientific.net/amr.339.656.

Full text

Abstract:

A new model of fly-wheel type chaffcutter was designed and the feeding mechanism and chopper design were described in detail in this paper. The theoretical calculation result verifies that each of the construction parameters can be able to satisfy the designing requirements. Then a performance test was conducted for the chaffcutter taking the production efficiency, fodder cutting quality and power consumption as the main check target of performance and the testing result reveals that the fodder cutting quality appears to be satisfactory and the power consumption is also within the limits acceptable when the productivity is around 780 kg/h, but the fodder cutting quality is hard to be guaranteed when the productivity goes beyond the one of 900 kg/h. The achievement in this study may provide a certain references for the design and test of chaffcutter.

APA, Harvard, Vancouver, ISO, and other styles

40

Jiang, Wei Hua, Yuan Cheng Fan, and Da Zeng. "Servo Drive Trajectory Design of Three-Axis Laser Processing System." Applied Mechanics and Materials 529 (June 2014): 139–43. http://dx.doi.org/10.4028/www.scientific.net/amm.529.139.

Full text

Abstract:

Three-axis processing of laser inner engraving machine control system can carry on multi-axis linkage control. Furthermore, it ensures multi-axis of high feeding speed and trajectory control of high precision. This article introduces the design of laser inner engraving machine movement control system. The core is a digital integrator of linear interpolation algorithm to generate the desired trajectory and control XYZ axis linkage. Wide speed range of servo motor and position detector resolution is adequate to constitute a half-closed loop drive. With integral separation algorithm being introduced in the controller, the speed of numerical control system, track speed and positioning accuracy are guaranteed in order to achieve optimal specification for dynamic and static characteristics of the whole system.

APA, Harvard, Vancouver, ISO, and other styles

41

Lee, Seok Woo, Hon Jong Choi, S. H. Nam, and Young Jin Choi. "Reliability Prediction of Centerless Grinding Machine." Key Engineering Materials 291-292 (August 2005): 151–56. http://dx.doi.org/10.4028/www.scientific.net/kem.291-292.151.

Full text

Abstract:

Along with the recent developments in the optical communication industry, the demand for optical communication components has increased. Ferrule is a significant element that determines transmission efficiency and quality of information in the optical communication area. Most ferrule machining entails grinding and this requires high processing precision. Therefore, the ultra precision centerless grinding machine for ferrule grinding was designed. The centerless grinding machine is composed of a high damping bed, grinding wheel spindle unit, regulating wheel spindle unit, feeding table and dressing unit. Reliability prediction is very important for the high quality design. In this study, reliability of the centerless grinding machine was predicted.

APA, Harvard, Vancouver, ISO, and other styles

42

Ariffin, M. K. A., Rohaya Kamaluddin, S. H. Tang, and Saiful Bahri Mohamed. "Analysis of Automated G-Clip Machine Processes and Substation Process with Simulation by Using CAD Software." Materials Science Forum 773-774 (November 2013): 28–36. http://dx.doi.org/10.4028/www.scientific.net/msf.773-774.28.

Full text

Abstract:

The paper presents the work of analysis of Automated G-clip Paperclip machine of using Solidworks Simulation and a comparison between results of each analysis in cutting process using design of experiment (DOE) and followed by design verification of simulating the cutting process after design changes. It emphasizes on the analysis of process and additional substation process to overcomes current machining problem. The current problem is occurred at the cutting station, which lead to poor quality product. There is two-design stage, which is preliminary of design of experiments conducted in order to fulfill the design validity and design verification. Application of longitudinal cyclic transfer system in feeding with pre-straightener substation is implied for comprehensive feeding of the wire with 1.3 mm diameter in 2 second. Forming dies with stepper motor controller give the precise positioning and repeatability of movement since good stepper motors have an accuracy between 3 5% of a step and this error is non-cumulative from one step to the next. By incorporating the new station in simulation procedure for this machine, it shows that the product quality is improved.

APA, Harvard, Vancouver, ISO, and other styles

43

Hua, Li, Xiang Jun Wang, and Rui Zhou. "Mirror Grinding Process Parameter Selection and Design." Applied Mechanics and Materials 670-671 (October 2014): 526–28. http://dx.doi.org/10.4028/www.scientific.net/amm.670-671.526.

Full text

Abstract:

Mirror grinding mainly depends on the precision of the machine tool, cutting and grinding amount and wheel selection and dressing. This paper mainly studies the MG1432 high-precision universal cylindrical grinder, exploring the impact on the workpiece roughness through selection and design of various process parameters in grinding, such as changing work table speed in dressing the grinding wheel and grinding, workpiece linear velocity and excessive feeding. The experimental conditions were: Using resin binder white corundum graphite grinding wheels, workpiece: GCr15 (HRC60); dressing tool: sharp single particle diamond correction pen, and ultimately achieving mirror grinding process results.

APA, Harvard, Vancouver, ISO, and other styles

44

Shu, Xia Yun, and Hong Hai Zhang. "Design and Experimental Investigation on High Efficient Horizontal Micro Electrical Discharge Machine." Applied Mechanics and Materials 456 (October 2013): 32–37. http://dx.doi.org/10.4028/www.scientific.net/amm.456.32.

Full text

Abstract:

Micro-electrical discharge machining is a non-contact manufacturing process without macroscopic force. Microelectrode fabrication is the fundamental and influence factor of micro electric discharge machining. As for the efficiency of microelectrode fabrication, this paper proposed a fast online microelectrode fabrication method by an efficient horizontal micro electric discharge machine, in which an online diamond wheel ultra-precision grinding method and an online wire electrical discharge grinding method is combined to fabricate microelectrode. Machine designed in this paper consist of a CCD online dimension examination system, precision motion and feeding system, nanosecond-pulse independent discharged power supply and gap state-detection system. experimental study on microelectrode, micro nozzle fabrication and microstructure milling by the machine conducted. Microelectrode with 15 micrometers in diameter and micro hole with 50 micrometers in diameter are done in experiment. Results show that the composite method improves the efficiency of micro electrical discharge machining.

APA, Harvard, Vancouver, ISO, and other styles

45

Siregar, Salman Al Farisi, Agus Triono, Mahros Darsin, and Santoso Mulyadi. "Measuring Feed Force in Machining Using a Strain Gage." Journal of Energy Mechanical Material and Manufacturing Engineering 6, no. 1 (June 7, 2021): 9–14. http://dx.doi.org/10.22219/jemmme.v6i1.11928.

Full text

Abstract:

Measuring the forces that work during machining has been being concerned by researchers for years. There are three main forces that work in turning: thrust force, axial force, and radial force. Thus, feeding force measurement is needed in machine manufacturing. This research attempts to develop measurement method through feeding force, using strain gauge sensor. The aim of measurement of feeding force in this research is to find out the influence parameter of machine towards feeding force. The research used experimental method with design experiment Taguchi to know the influence of machine parameters to feeding force in turning process. The measurement tool is strain gauge sensor connected to cutting tool. The workspace is alluminium 6061 with 15 mm in diameter and 150 mm in length. The parameters for this research are speed rate (140 rpm, 215 rpm, and 330 rpm), feed rate (0,043 mm/r , 0,065 mm/r , and 0,081 mm/r), and depth of cut (0,2 mm, 0,4 mm, and 0,6 mm). The result showed that speed rate is the most significant parameter, with the contribution percentage is 92 %. Speed rate and feed rate parameter have insignificant influence. The contribution percentage of speed rate is 2% while the feed rate has % contribution percentage. The conclusion of the research is that the bigger number of speed rate, the bigger feeding force it will have.

APA, Harvard, Vancouver, ISO, and other styles

46

Zhao, Zhenfeng, Chuanyun Yi, Yuansheng Deng, and Leilei Han. "Design of control system of Multifunctional Loading and Unloading Equipment." E3S Web of Conferences 252 (2021): 02019. http://dx.doi.org/10.1051/e3sconf/202125202019.

Full text

Abstract:

The main structure of the multifunctional loading and unloading machine is analyzed and designed, including feeding conveyor, intermediate conveyor and unloading conveyor. According to the action of each part of the hydraulic system and electrical system design, in order to meet the needs of more working conditions, the working mechanism realized the overall slip, telescopic conveyor lifting, rotating, telescopic; Combined with the convenience of worker operation, three control modes of remote control, workbench control and terminal control are designed.

APA, Harvard, Vancouver, ISO, and other styles

47

Ardiyan, Sukma, Diky F, Winarto Winarto, and Ridwan Baharta. "Rancang Bangun Mesin Penebar Pakan Ikan Berbasis Programmable Logic Controller." Jurnal Ilmiah Teknik Pertanian - TekTan 12, no. 2 (December 22, 2020): 82–94. http://dx.doi.org/10.25181/tektan.v12i2.1907.

Full text

Abstract:

The fish feed spreader machine is a feeding tool that is made to facilitate fish breeders in feeding fish. The fish feed spreader is specially programmed to provide fish feed according to the schedule and the desired dose. The purpose of making this tool is to design a fish feed spreader machine based on the logic controller programmale, and to test the performance of the designed fish feed spreader machine. The results showed that the average feed expenditure was 2.66 kg for a duration of 40 seconds. Then for the farthest throw of feed is 7.5 meters, while for throw of feed that is evenly distributed it has a distance of 5 meters with a spread width of 5.85 meters, and the angle of spread of feed is 90º.

APA, Harvard, Vancouver, ISO, and other styles

48

Zhao, Renfeng, Jingyu Zhou, Yan Li, Shuqin Fan, Jingxiang Li, Xudong Xiao, and Zhi Yang. "Design and Experimental Study of Rotary Type High-Speed Shearer for Metal Bars." MATEC Web of Conferences 166 (2018): 01008. http://dx.doi.org/10.1051/matecconf/201816601008.

Full text

Abstract:

For the precision shear of bars, the kind of rotating high-speed precision cutting method has been given. The structure design of rotary precision shearing machine and the structure design of feeding structure are completed. The method of numerical simulation is used to optimize the cutting tool, and then the experiment platform is completed. Rotary impact and the stress concentration effect of the surface of the bar are used in the paper. The experiment is carried out for the Φ8 mm diameter stainless steel bar stock by changing the speed of the cutting tool through the converter and controlling rod feeding efficiency. The experimental results show that the method is feasible to meet the requirement of various material of the small diameter rod in the industry.

APA, Harvard, Vancouver, ISO, and other styles

49

Zheng, Yu Qing, Zhi Hong Zhang, and Xi Li Ni. "The HST Load Feedback Automatic Speed Regulating Device Design for Combine Harvester." Advanced Materials Research 915-916 (April 2014): 273–76. http://dx.doi.org/10.4028/www.scientific.net/amr.915-916.273.

Full text

Abstract:

In order to slove the problem that the combine harvester safety belt is often burned out because of machine’ driving forward fast and excessive feeding, it describes an new HST automatic speed regulating device based on the feedback signal from the torque load real-time inspection. This device can effectively avoid the bad case occurrence of safety belt burning out, so it can assure the harvester stability and production efficiency increase dramatically during working process.

APA, Harvard, Vancouver, ISO, and other styles

50

Dinc, O. S., R. Cromer, and S. J. Calabrese. "Redesigning Mechanical Systems for Low Wear Using System Dynamics Modeling." Journal of Tribology 118, no. 2 (April 1, 1996): 415–22. http://dx.doi.org/10.1115/1.2831318.

Full text

Abstract:

This work describes a method of minimizing wear and extending the life of machinery components and large, complex machine structures by controlling the overall system dynamics. The method consists of the following steps: first, developing a system dynamics model for the entire machine structure using available rigid multi-body dynamic analysis computer codes; second, obtaining dynamic performance data from the system dynamics model for each sliding contact in the actual machine, and feeding this information into a suitable wear model which is either being used or developed for the particular material combination; third, matching the results of the wear prediction with actual machine wear inspection data; and last and most important, returning to the dynamic analysis model and modifying or redesigning the machine to minimize the intensity of the system dynamics, thus extending the wear life of the components. The method is being developed for application to large, complex machines which have numerous sliding contacts. Many of these contacts are at junctions between subcomponents assembled together. These junctions are often designed to accommodate relative motion due to vibration or thermal mismatches. After the initial analyses have been done, both minor and major mechanical design and material changes must be investigated to determine how effectively these could reduce wear. Each successive configuration can be evaluated using the dynamic analysis model. Application of this approach to the mechanical design of a gas turbine combustor reduced the noise level of the entire system and tripled the average machine life.

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!