Journal articles: 'Fabry-Perot interferometers'

1

Steel, W. H. "Fabry-Perot Interferometers." Optica Acta: International Journal of Optics 33, no. 10 (October 1986): 1227. http://dx.doi.org/10.1080/716099694.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Henderson, A. R. "Fabry-Perot interferometers." Optics & Laser Technology 18, no. 5 (October 1986): 274. http://dx.doi.org/10.1016/0030-3992(86)90094-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Sica, R. J. "Fabry-Perot Interferometers." Eos, Transactions American Geophysical Union 69, no. 3 (1988): 37. http://dx.doi.org/10.1029/88eo00026.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Budinski, Vedran, and Denis Donlagic. "Miniature Twist/Rotation Fabry Perot Sensor Based on a Four-Core Fiber." Proceedings 2, no. 13 (December 11, 2018): 1091. http://dx.doi.org/10.3390/proceedings2131091.

Full text

Abstract:

This paper presents a miniature Fabry Perot twist/rotation sensor. The presented sensor consists of a single lead-in multicore fiber, which has four eccentrically positioned cores, a special asymmetrical microstructure, similar to a truncated cylinder, and an inline semi reflective mirror, all packed in a glass capillary housing. The perpendicular cut lead-in multicore fiber and the inline semi reflective mirror form four Fabry-Perot cavities. The optical path length of each Fabry-Perot interferometer is defined by the distance between mirrors, refractive index and twist/rotation angle of the microstructure in relation to the core positions in the lead in multicore fiber. Optical paths of Fabry-Perot Interferometers are modulated by a structure’s twist/rotation, change of structure length, or change of temperature. Each of these parameters modulate the optical path length of the individual interferometers in their own separate fashion, thus allowing independent measurements of twist/rotation, length/strain and temperature.

APA, Harvard, Vancouver, ISO, and other styles

5

van de Stadt, Herman, and Johan M. Muller. "Multimirror Fabry–Perot interferometers." Journal of the Optical Society of America A 2, no. 8 (August 1, 1985): 1363. http://dx.doi.org/10.1364/josaa.2.001363.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Budinski, Vedran, and Denis Donlagic. "A Miniature Fabry Perot Sensor for Twist/Rotation, Strain and Temperature Measurements Based on a Four-Core Fiber." Sensors 19, no. 7 (April 1, 2019): 1574. http://dx.doi.org/10.3390/s19071574.

Full text

Abstract:

In this article, a novel miniature Fabry-Perot twist/rotation sensor using a four core fiber and quadruple interferometer setup is presented and demonstrated. Detailed sensor modeling, analytical evaluation and test measurement assessment were conducted in this contribution. The sensor structure comprises a single lead-in multicore fiber, which has four eccentrically positioned cores, a special asymmetrical microstructure, and an inline semi-reflective mirror, all packed in a glass capillary housing. A four core fiber positioned in front of a special asymmetrical microstructure and the inline semi reflective mirror defines four Fabry-Perot interferometers. Rotation of the sensors’ asymmetrical microstructure around the axis of the in-line four core fibers´ modulates the path lengths of all four interferometers simultaneously. Proper processing of path length changes of all four interferometers allows for unambiguous and temperature independent determination of the sensor’s rotation angle.

APA, Harvard, Vancouver, ISO, and other styles

7

Golyak, I. S., A. N. Morozov, A. L. Nazolin, S. E. Tabalin, A. A. Esakov, and I. V. Fomin. "Information-Measuring Complex to Detect High Frequency Gravitational Waves." Radio Engineering, no. 2 (August 22, 2021): 13–23. http://dx.doi.org/10.36027/rdeng.0221.0000190.

Full text

Abstract:

The gravitational waves predicted by the general theory of relativity and detected by the Laser Interferometer Gravitational-wave Observatory (LIGO) have typical frequencies in the range of 30 ... 300 Hz. Current theories of gravity predict the existence of high-frequency gravitational waves with frequencies of 10 ... 100 MHz, including those of cosmological origin, induced by quantum fluctuations of the scalar field at the stage of cosmological inflation in the early Universe.Multi-beam optical resonators, in particular the Fabry-Perot interferometers, can be used to detect high-frequency gravitational waves. When using multi-beam optical resonators, it is possible to use the phenomenon of low-frequency optical resonance, which allows us to have a selective response to the gravitational wave effect. The gravitational-optical resonance in a multi-beam interferometer occurs if the condition is fulfilled that an integer number of half-waves of gravitational radiation is along the length of the resonator.The use of a multi-beam interferometer to detect high-frequency gravitational waves does not require the creation of a complex system for decoupling mirrors used for gravitational antennas operating in the low-frequency part of the spectrum. This is due to the fact that the frequency of mechanical vibrations of the interferometer mirrors is significantly less than the frequency of the gravitational wave.The paper considers possible optical schemes of a high-frequency gravitational antenna: based on the traditional Michelson interferometer, in the arms of which two Fabry-Perot interferometers are available, and on the basis of the Mach-Zehnder optical scheme, where Fabry-Perot interferometers can be made in the form of two perpendicular arms, with reflecting mirrors at the bend of the beam. The advantage of the second scheme is that three photo-detectors, one being main and two others being auxiliary, can be used, and there is a possibility to detect radiation transmitted by Fabry-Perot interferometers.To prove that detection of high-frequency gravitational waves is possible, a potential sensitivity of the high-frequency gravitational antenna has been estimated in the paper.

APA, Harvard, Vancouver, ISO, and other styles

8

Gomes, André D., Martin Becker, Jan Dellith, Mohammad I. Zibaii, Hamid Latifi, Manfred Rothhardt, Hartmut Bartelt, and Orlando Frazão. "Multimode Fabry–Perot Interferometer Probe Based on Vernier Effect for Enhanced Temperature Sensing." Sensors 19, no. 3 (January 22, 2019): 453. http://dx.doi.org/10.3390/s19030453.

Full text

Abstract:

New miniaturized sensors for biological and medical applications must be adapted to the measuring environments and they should provide a high measurement resolution to sense small changes. The Vernier effect is an effective way of magnifying the sensitivity of a device, allowing for higher resolution sensing. We applied this concept to the development of a small-size optical fiber Fabry–Perot interferometer probe that presents more than 60-fold higher sensitivity to temperature than the normal Fabry–Perot interferometer without the Vernier effect. This enables the sensor to reach higher temperature resolutions. The silica Fabry–Perot interferometer is created by focused ion beam milling of the end of a tapered multimode fiber. Multiple Fabry–Perot interferometers with shifted frequencies are generated in the cavity due to the presence of multiple modes. The reflection spectrum shows two main components in the Fast Fourier transform that give rise to the Vernier effect. The superposition of these components presents an enhancement of sensitivity to temperature. The same effect is also obtained by monitoring the reflection spectrum node without any filtering. A temperature sensitivity of -654 pm/°C was obtained between 30 °C and 120 °C, with an experimental resolution of 0.14 °C. Stability measurements are also reported.

APA, Harvard, Vancouver, ISO, and other styles

9

Jockers, Klaus. "Astronomical Observations of Comets and the Io Torus Using Fabry-Perot-Interferometry." International Astronomical Union Colloquium 149 (1995): 182–87. http://dx.doi.org/10.1017/s0252921100022910.

Full text

Abstract:

AbstractFabry-Perot interferometers have been applied in a focal reducer to observe radiation from atoms and molecules in comets and in the Io torus. Tunable Fabry-Perot interferometers have been used as narrowband filters, and an etalon with fixed airgap in classical arrangement was employed for the measurement of Doppler shifts and for narrow-line photometry.

APA, Harvard, Vancouver, ISO, and other styles

10

Hogeveen, Sake J., and Herman van de Stadt. "Fabry-Perot interferometers with three mirrors." Applied Optics 25, no. 22 (November 15, 1986): 4181. http://dx.doi.org/10.1364/ao.25.004181.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Stone, J., and D. Marcuse. "Ultrahigh finesse fiber Fabry-Perot interferometers." Journal of Lightwave Technology 4, no. 4 (1986): 382–85. http://dx.doi.org/10.1109/jlt.1986.1074739.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Redding, David, Martin Regehr, and Lisa Sievers. "Dynamic models of Fabry-Perot interferometers." Applied Optics 41, no. 15 (May 20, 2002): 2894. http://dx.doi.org/10.1364/ao.41.002894.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Bland-Hawthorn, J. "Tridimensional Spectroscopic Techniques: Conference Summary." International Astronomical Union Colloquium 149 (1995): 369–81. http://dx.doi.org/10.1017/s0252921100023332.

Full text

Abstract:

Over the last four days, we have enjoyed a wide range of talks on developments in three dimensional spectroscopic techniques. The conference organizing committee are to be congratulated for the artful manner in which instrumental presentations were interleaved with talks on the scientific results from these instruments. The general thrust of most talks was to advance the versatility of traditional instruments either through the Jacquinot (throughput) advantage or through the multiplex advantage, or both. A number of groups have attempted to utilize the full aperture of scanning Fabry-Perot and Fourier Transform interferometers. Arguably, Fabry-Perot interferometers have a wider application at present, although imaging Fourier Transform devices appear to have finally arrived, at least in the near infrared.

APA, Harvard, Vancouver, ISO, and other styles

14

Ahmedov, Haci, Mehnet Celik, Recep Orhan, Beste Korutlu, Sahin Ersoy, and Ramiz Hamid. "A UME Kibble balance displacement measurement procedure." ACTA IMEKO 9, no. 3 (September 30, 2020): 11. http://dx.doi.org/10.21014/acta_imeko.v9i3.766.

Full text

Abstract:

<p>The redefinition of the kilogram in terms of Planck constant came into effect on 20 May 2019. The National Metrology Institute of Turkey (UME) realised the new definition by means of the oscillating magnet Kibble balance. The novel dynamical measurement procedure developed for Kibble balance in Turkey has the advantage of being less sensitive to environmental disturbances compared to the traditional Kibble balance experiments. Precise displacement measurements are performed either with Michelson or Fabry-Perot interferometers in worldwide Kibble balances. Moreover, most of them operate in a global vacuum. A commercial Michelson interferometer has been used in UME’s Kibble balance experiment. In this article, we determine the contribution of ultra-small oscillations to the Planck constant by taking simultaneous displacement measurements on two back-to-back mirrors attached to the piezoelectric transducer, undergoing an oscillatory motion with the Michelson and Fabry-Perot interferometers. The following novel measurement procedure makes such measurements possible in a regular laboratory environment. Otherwise, the experiment needs to be performed in a global vacuum. This is why we were required to investigate the resolution performances of these devices in laboratory conditions. As the expected relative uncertainty in the redefinition of kilogram is above the resolution uncertainties of both interferometers, we may conclude that a commercial Michelson interferometer will serve our purposes in our route to the redefinition of a kilogram by means of local vacuum.</p>

APA, Harvard, Vancouver, ISO, and other styles

15

Darlington, E. H., and J. R. Haviland. "Photon counting detectors for Fabry-Perot interferometers." Applied Optics 28, no. 3 (February 1, 1989): 565. http://dx.doi.org/10.1364/ao.28.000565.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Gary, G. A., E. A. West, D. Rees, J. A. McKay, M. Zukic, and P. Herman. "Solar CIV vacuum-ultraviolet Fabry-Perot interferometers." Astronomy & Astrophysics 461, no. 2 (October 4, 2006): 707–22. http://dx.doi.org/10.1051/0004-6361:20066035.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Mallinson, S. R., and J. H. Jerman. "Miniature micromachined Fabry-Perot interferometers in silicon." Electronics Letters 23, no. 20 (1987): 1041. http://dx.doi.org/10.1049/el:19870728.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Stone, J., P. F. Glodis, D. Marcuse, and L. W. Stulz. "Large mode-size fibre Fabry-Perot interferometers." Electronics Letters 25, no. 25 (1989): 1698. http://dx.doi.org/10.1049/el:19891135.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Sidles, John A., and Daniel Sigg. "Optical torques in suspended Fabry–Perot interferometers." Physics Letters A 354, no. 3 (May 2006): 167–72. http://dx.doi.org/10.1016/j.physleta.2006.01.051.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Herbst, Thomas M., and Steven V. W. Beckwith. "Active stabilization system for Fabry-Perot interferometers." Applied Optics 28, no. 24 (December 15, 1989): 5275. http://dx.doi.org/10.1364/ao.28.005275.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Herbst, T. M., and S. Beckwith. "Modified technique for calibrating Fabry–Perot interferometers." Applied Optics 31, no. 4 (February 1, 1992): 435. http://dx.doi.org/10.1364/ao.31.000435.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Reis, João, António V.Rodrigues, Paulo Robalinho, Susana Novais, João Maia, Paulo Marques, D. Roma, et al. "The effect of frequency modulation on the FSR of a Fabry-Perot cavity using an Optical Spectrum Analyser." EPJ Web of Conferences 266 (2022): 13027. http://dx.doi.org/10.1051/epjconf/202226613027.

Full text

Abstract:

It is presented a study of the dependence between the free spectral range (FSR) and the cavity length in Fabry-Perot interferometers. Furthermore, the effect of frequency modulation on the FSR is studied when an optical spectrum analyser (OSA) is used as an interrogator. For low frequency range it is possible to observe this behaviour in the OSA and using an appropriate processing signal it is possible to use the white light interferometry technique.

APA, Harvard, Vancouver, ISO, and other styles

23

DeSalvo, Riccardo, Jeremy Blow, Claudio Pineda Bosque, and Stefano Selleri. "Angled beam expander telescopes for the Michelson beams in third generation gravitational wave observatories." Classical and Quantum Gravity 39, no. 4 (January 21, 2022): 045008. http://dx.doi.org/10.1088/1361-6382/ac45dd.

Full text

Abstract:

Abstract The third generation of gravitational wave detectors like the Einstein telescope or the cosmic explorer will be Michelson interferometers with Fabry–Perot cavities in the arms, using mirror test masses with diameter at the limit of technical feasibility. Unlike other detectors, the Einstein telescope will have a 60° angle between the arms. Because of its larger incidence angle, at any given beam size, it would require beam splitters almost double in size and much heavier than the 90° case. It is proposed here to install beam expander telescopes with angled mirrors located inside the Michelson interferometer between the Fabry–Perot cavities and the beam splitter. In addition to reducing the beam sizes and the beam splitter to manageable sizes, the proposed solution allows to bring the optimal recombination angle to 90°. The proposed geometry also offers a natural way to separate the beam splitters of different detectors into individual, smaller and more stable caverns thus improving observatory observation-time efficiency, to provide needed beam diagnostic points and convenient degrees of freedom for beam alignment into both the Fabry Perot cavities and the beam splitter, as well as to provide a method for maintaining optimal mode matching of the two arms onto the beam splitter without thermal compensation plates.

APA, Harvard, Vancouver, ISO, and other styles

24

Choi, H., P. Jiang, M. D. Godfrey, W. Kang, S. H. Simon, L. N. Pfeiffer, K. W. West, and K. W. Baldwin. "Aharonov–Bohm-like oscillations in Fabry–Perot interferometers." New Journal of Physics 13, no. 5 (May 24, 2011): 055007. http://dx.doi.org/10.1088/1367-2630/13/5/055007.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Nishimura, T., F. Low, and K. Shivanandan. "Superconducting electromagnetic actuators for astronomical Fabry-Perot interferometers." IEEE Transactions on Magnetics 21, no. 2 (March 1985): 451–54. http://dx.doi.org/10.1109/tmag.1985.1063858.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Perkalskis, Benjamin S., and J. Reuben Freeman. "Fabry–Perot interferometers for lecture demonstrations and laboratories." American Journal of Physics 64, no. 9 (September 1996): 1210–12. http://dx.doi.org/10.1119/1.18349.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Rissanen, Anna, Altti Akujärvi, Jarkko Antila, Martti Blomberg, and Heikki Saari. "MOEMS miniature spectrometers using tuneable Fabry-Perot interferometers." Journal of Micro/Nanolithography, MEMS, and MOEMS 11, no. 2 (May 25, 2012): 023003–1. http://dx.doi.org/10.1117/1.jmm.11.2.023003.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Gomes, André D., Marta S. Ferreira, Jörg Bierlich, Jens Kobelke, Manfred Rothhardt, Hartmut Bartelt, and Orlando Frazão. "Optical Harmonic Vernier Effect: A New Tool for High Performance Interferometric Fiber Sensors." Sensors 19, no. 24 (December 9, 2019): 5431. http://dx.doi.org/10.3390/s19245431.

Full text

Abstract:

The optical Vernier effect magnifies the sensing capabilities of an interferometer, allowing for unprecedented sensitivities and resolutions to be achieved. Just like a caliper uses two different scales to achieve higher resolution measurements, the optical Vernier effect is based on the overlap in the responses of two interferometers with slightly detuned interference signals. Here, we present a novel approach in detail, which introduces optical harmonics to the Vernier effect through Fabry–Perot interferometers, where the two interferometers can have very different frequencies in the interferometric pattern. We demonstrate not only a considerable enhancement compared to current methods, but also better control of the sensitivity magnification factor, which scales up with the order of the harmonics, allowing us to surpass the limits of the conventional Vernier effect as used today. In addition, this novel concept opens also new ways of dimensioning the sensing structures, together with improved fabrication tolerances.

APA, Harvard, Vancouver, ISO, and other styles

29

Xiaobei Zhang, Xiaobei Zhang, Jiabao Xiong Jiabao Xiong, Fan Gu Fan Gu, Jinlong Li Jinlong Li, Wenyuan Wang Wenyuan Wang, Fufei Pang Fufei Pang, and and Tingyun Wang and Tingyun Wang. "Fabrication and sensing characteristics of intrinsic Fabry–Perot interferometers in fiber tapers." Chinese Optics Letters 13, no. 12 (2015): 120602–5. http://dx.doi.org/10.3788/col201513.120602.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Hsu, Kevin, Calvin M. Miller, and Yufei Bao. "Fiber Fabry–Perot interferometers with very low polarization sensitivity." Applied Optics 33, no. 28 (October 1, 1994): 6617. http://dx.doi.org/10.1364/ao.33.006617.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Song, Changbo, Antonella Boselli, Alberto Porzio, Nicola Spinelli, Yiming Zhao, and Xuan Wang. "Dual-wavelength dispersion characterization of confocal Fabry–Perot interferometers." Applied Optics 57, no. 10 (March 22, 2018): 2361. http://dx.doi.org/10.1364/ao.57.002361.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Zhu, Yu-Ying, Meng-Meng Bai, Shu-Yu Zheng, Jie Fan, Xiu-Nian Jing, Zhong-Qing Ji, Chang-Li Yang, Guang-Tong Liu, and Li Lu. "Coulomb-Dominated Oscillations in Fabry–Perot Quantum Hall Interferometers." Chinese Physics Letters 34, no. 6 (June 2017): 067301. http://dx.doi.org/10.1088/0256-307x/34/6/067301.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Balkarey, Yu I., A. S. Cohen, and M. G. Evtikhov. "Instabilities of Lateral Modes in Semiconductor Fabry-perot Interferometers." Journal of Modern Optics 39, no. 7 (July 1992): 1583–91. http://dx.doi.org/10.1080/09500349214551591.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

St-Gelais, Raphael, Gillian Mackey, John Saunders, Jingjing Zhou, Antoine Leblanc-Hotte, Alexandre Poulin, Jack A. Barnes, Hans-Peter Loock, R. Stephen Brown, and Yves-Alain Peter. "Gas sensing using polymer-functionalized deformable Fabry–Perot interferometers." Sensors and Actuators B: Chemical 182 (June 2013): 45–52. http://dx.doi.org/10.1016/j.snb.2013.02.016.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Pongrac, Blaž, Denis Đonlagic, Matej Njegovec, and Dušan Gleich. "THz Signal Generator Using a Single DFB Laser Diode and the Unbalanced Optical Fiber Interferometer." Sensors 20, no. 17 (August 28, 2020): 4862. http://dx.doi.org/10.3390/s20174862.

Full text

Abstract:

This paper presents a frequency-modulated optical signal generator in the THz band. The proposed method is based on a fast optical frequency sweep of a single narrowband laser diode used together with an optical fiber interferometer. The optical frequency sweep using a single laser diode is achieved by generating short current pulses with a high amplitude, which are driving the laser diode. Theoretical analysis showed that the modulation frequency could be changed by the optical path difference of the interferometer or optical frequency sweep rate of a laser diode. The efficiency of the optical signal generator with Michelson and Fabry–Perot interferometers is theoretically analyzed and experimentally evaluated for three different scenarios. Interferometers with different optical path differences and a fixed optical frequency sweep rate were used in the first scenario. Different optical frequency sweep rates and fixed optical path differences of the interferometers were used in the second scenario. This paper presents a method for optical chirp generation using a programmable current pulse waveform, which drives a laser diode to achieve nonlinear optical sweep with a fixed optical path difference of the interferometer. The experimental results showed that the proposed signals could be generated within a microwave (1–30 GHz) and THz band (0.1–0.3 THz).

APA, Harvard, Vancouver, ISO, and other styles

36

Pietraszewski, K. A. R. B., C. R. Bell, J. Ring, N. K. Reay, and M. Leeper. "Multiplexed interferometric stellar oscillation spectrometry - MISOS." Symposium - International Astronomical Union 123 (1988): 517–20. http://dx.doi.org/10.1017/s0074180900158620.

Full text

Abstract:

Interferometric spectrometry techniques for measuring stellar oscillations have been developed at Imperial College, resulting in two separate interferometers, the Michelson and the Fabry-Perot based instruments. They have both been used on large telescopes; the Michelson instrument to search for oscillations in solar-type stars and the Fabry-Perot instrument to measure oscillations in δScuti-type stars. So far there has been only marginal evidence for solar-type oscillations, including our observations of εCyg with ~1ms−1 precision. In order to increase the significance of future observations we are currently improving both instruments and aim to achieve a ten-fold increase in precision, i.e. ~10cms−1, by using up to 100 separate spectral lines simultaneously. Such an improvement will allow us to continue the search for solar-type oscillations.

APA, Harvard, Vancouver, ISO, and other styles

37

Greco, V., A. Sordini, G. Cauzzi, K. Reardon, and F. Cavallini. "New technique to measure the cavity defects of Fabry–Perot interferometers." Astronomy & Astrophysics 626 (June 2019): A43. http://dx.doi.org/10.1051/0004-6361/201935302.

Full text

Abstract:

Context. Several astronomical instruments, for both nighttime and solar use, rely on tunable Fabry–Perot interferometers (FPIs). Knowing the exact shape of the etalons’ cavity is crucial for assessing the overall instrumental transmission profile and its possible variations during the tuning process. Aims. We aim to define and test a technique to accurately measure the cavity defects of air-spaced FPIs, including distortions due to the spectral tuning process that are typical of astronomical observations. We further aim to develop a correction technique to maintain the shape of the cavity as constant as possible during the spectral scan. These are necessary steps to optimize the spectral transmission profile of a two-dimensional spectrograph (polarimeter) using one or more FPIs in series, and to ensure that the spectral transmission profile remains constant during typical observing conditions. Methods. We devised a generalization of the techniques developed for the so-called phase-shifting interferometry to the case of FPI. This measuring technique is applicable to any given FPI that can be tuned via changing the cavity spacing (z-axis), and can be used for any etalon regardless of the coating’ reflectivity. The major strength of our method is the ability to fully characterize the cavity during a spectral scan, allowing for the determination of scan-dependent modifications of the plates. We have applied the measuring technique to three 50 mm diameter interferometers, with cavity gaps ranging between 600 μm and 3 mm, coated for use in the visible range. Results. The technique developed in this paper allows us to accurately and reliably measure the cavity defects of air-spaced FPIs, and of their evolution during the entire spectral scan. Our main, and unexpected, result is that the relative tilt between the two FPI plates varies significantly during the spectral scan, and can dominate the cavity defects; in particular, we observe that the tilt component at the extremes of the scan is sensibly larger than that at the center of the scan. Exploiting the capability of the electronic controllers to set the reference plane at any given spectral step, we then develop a correction technique that allows the minimization of the tilt during a complete spectral scan. The correction remains highly stable over long periods, well beyond the typical duration of astronomical observations.

APA, Harvard, Vancouver, ISO, and other styles

38

Egorova, O. N., S. G. Zhuravlev, V. I. Pustovoy, and S. L. Semjonov. "Multicore optical fibre embedded Fabry–Perot sensing element of a bend sensor." Quantum Electronics 51, no. 12 (December 1, 2021): 1096–100. http://dx.doi.org/10.1070/qel17662.

Full text

Abstract:

Abstract We propose a new type of a sensing element of a sensor for measuring the bending direction and magnitude, based on fibre Fabry–Perot interferometers embedded in the cores of multicore optical fibre. The measured sensitivity to the bend radius is 81 pm/m−1. It is found that this sensitivity can be increased by varying the diameters of the optical fibres forming the sensing element.

APA, Harvard, Vancouver, ISO, and other styles

39

Tully, R. Brent. "Observations of Extragalactic Objects with the Hawaii Imaging Fabry-Perot Interferometer (HIFI)." International Astronomical Union Colloquium 149 (1995): 107–12. http://dx.doi.org/10.1017/s0252921100022740.

Full text

Abstract:

AbstractImaging Fabry-Perot interferometers have a particularly useful role to play in studies of the extended regions of anomalous emission in active galaxies. It becomes possible to study the velocity and excitation structure of warm gas with full coverage of large fields. Observations and modeling of several good examples of transient activity will be described as a way of demonstrating the power of an operational facility.

APA, Harvard, Vancouver, ISO, and other styles

40

Gierowski, Jakub, and Sandra Pawłowska. "Surface quality control of thin SiN layer by optical measurements." Photonics Letters of Poland 13, no. 3 (September 30, 2021): 61. http://dx.doi.org/10.4302/plp.v13i3.1096.

Full text

Abstract:

Fiber optic interferometers have a wide range of applications including biological and chemical measurements. Nevertheless, in case of a reflective interferometer setup, standard silver mirrors cannot be used in every measurement, due to their chemical activity. In this work, we investigate the surface quality of a thin optical layer of silicon nitride (SiN) which can serve as an alternative material for silver mirrors. We present measurements carried out with a Fabry-Perot fiber optic interferometer working in a reflective mode. Measurement results allow us to determine the surface quality of the investigated layer. Full Text: PDF ReferencesK. Karpienko, M.S. Wróbel, M. Jedrzejewska-Szczerska, "Determination of refractive index dispersion using fiber-optic low-coherence Fabry-Perot interferometer: implementation and validation", Opt Express, 53, 077103 (2014). CrossRef Jedrzejewska-Szczerska M., Gnyba M., Kosmowski B. B. "Low-coherence fibre-optic interferometric sensors", Acta Phys. Pol. A 120, 621 (2011). CrossRef M. Jedrzejewska-Szczerska "Response of a new low-coherence Fabry-Perot sensor to hematocrit levels in human blood",Sensors 14(4), 6965 (2014). CrossRef M. Kosowska, D. Majchrowicz, K.J. Sankaran, M. Ficek, K. Haenen, M. Szczerska, "Doped Nanocrystalline Diamond Films as Reflective Layers for Fiber-Optic Sensors of Refractive Index of Liquids", Materials 12, 2124 (2019). CrossRef Shou-YiChang, Yi-Chung Huang, "Analyses of interface adhesion between porous SiO2 low-k film and SiC/SiN layers by nanoindentation and nanoscratch tests", Microelectron. Eng. 84(2), 319 (2007). CrossRef X. Wang, C. Wang, X. Shen, F. Sun, "Potential Material for Fabricating Optical Mirrors: Polished Diamond Coated Silicon Carbide". Appl. Opt. 56, 4113 (2017). CrossRef G. Coppola, P. Ferraro, M. Iodice, S. De Nicola, "Method for measuring the refractive index and the thickness of transparent plates with a lateral-shear, wavelength-scanning interferometer", Appl. Opt. 42, 3882 (2003). CrossRef H. Mäckel, R. Lüdemann, "Detailed study of the composition of hydrogenated SiNx layers for high-quality silicon surface passivation", J. Appl, Phys. 92, 2602 (2002). CrossRef N. Atman, M. Krzywinski, "Visualizing samples with box plots", Nat. Methods, 11(2), 119 (2014). CrossRef M. Vignesh, R. Balaji, "Data analysis using Box and Whisker Plot for Lung Cancer", International Conference on Innovations in Power and Advanced Computing Technologies,(2017). CrossRef

APA, Harvard, Vancouver, ISO, and other styles

41

Riesen, Nicolas, Nicholas Phillips, Linh V. Nguyen, Stephen C. Warren-Smith, Craig Priest, and David G. Lancaster. "Design considerations for graded index fiber tip Fabry–Perot interferometers." Measurement Science and Technology 32, no. 5 (March 12, 2021): 055201. http://dx.doi.org/10.1088/1361-6501/abe0d8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Guertin, Régis, Marc-Antoine Bianki, Cédric Lemieux-Leduc, and Yves-Alain Peter. "Multi-gas detection using Fabry-Perot interferometers on silicon chip." Sensors and Actuators B: Chemical 335 (May 2021): 129655. http://dx.doi.org/10.1016/j.snb.2021.129655.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Ding, Meng, Eric R. Numkam Fokoua, Thomas D. Bradley, Francesco Poletti, David J. Richardson, and Radan Slavik. "Finesse Limits in Hollow Core Fiber based Fabry-Perot interferometers." Journal of Lightwave Technology 39, no. 13 (July 2021): 4489–95. http://dx.doi.org/10.1109/jlt.2021.3074140.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Piché, Michel, and François Ouellette. "Compression of mode-locked pulses using nonlinear Fabry–Perot interferometers." Optics Letters 11, no. 1 (January 1, 1986): 15. http://dx.doi.org/10.1364/ol.11.000015.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Davis, Jeffrey A., María del Mar Sánchez-López, Julia Arias, Miguel Navarro, and Ignacio Moreno. "Resonant frequencies of Fabry-Perot interferometers with ultrathin mirror spacings." Applied Optics 46, no. 16 (May 15, 2007): 3075. http://dx.doi.org/10.1364/ao.46.003075.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Leal-Junior, Arnaldo G., Anselmo Frizera, and Carlos Marques. "High Sensitive Ammonia Detection in Water With Fabry-Perot Interferometers." IEEE Photonics Technology Letters 32, no. 14 (July 15, 2020): 863–66. http://dx.doi.org/10.1109/lpt.2020.3001421.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Kappel, Christoph, André Selle, Mark Andreas Bader, and Gerd Marowsky. "Resonant double-grating waveguide structures as inverted Fabry–Perot interferometers." Journal of the Optical Society of America B 21, no. 6 (June 1, 2004): 1127. http://dx.doi.org/10.1364/josab.21.001127.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Baranov, D. V., I. V. Zhurilova, S. K. Isaev, L. S. Kornienko, and A. A. Sachkov. "Fiber-optic Fabry–Perot interferometers utilizing graded-index optical waveguides." Soviet Journal of Quantum Electronics 19, no. 5 (May 31, 1989): 690–92. http://dx.doi.org/10.1070/qe1989v019n05abeh008104.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Reardon, K. P., and F. Cavallini. "Characterization of Fabry-Perot interferometers and multi-etalon transmission profiles." Astronomy & Astrophysics 481, no. 3 (February 14, 2008): 897–912. http://dx.doi.org/10.1051/0004-6361:20078473.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Reay, N. K., and K. A. R. B. Pietraszewski. "Cryogenic servo-stabilized Fabry-Perot interferometers for imaging at 3-5 and 8-13 microns." International Astronomical Union Colloquium 149 (1995): 60–68. http://dx.doi.org/10.1017/s0252921100022673.

Full text

Abstract:

AbstractThe performance of a new liquid Nitrogen cooled Fabry-Perot etalon for imaging at 3-5µm is described. Capacitance sensors monitor the etalon mirror spacing and parallelism, and error signals produced as a consequence of changes in these parameters are used in a feedback loop with piezoelectric actuators for active cavity control. These new cryogenic etalons are designed to be compatible with the Queensgate Instruments Ltd CS100/ET servo-stabilized Fabry-Perot system.The cryogenic etalon has a clear aperture of 50mm and a nominal mirror spacing of between 5 and 60µm. It is coated for the 3 - 5µm spectral region, although coatings are also available for the 2 - 2.5µm and 8 - 13µm regions. Under servo-control at operating temperature the etalon has a response time of 30 msec and a minimum cavity tuning range of ±3µm about the nominal cavity length, corresponding to approximately 3 orders of interference at the midrange wavelength of 4µm.

APA, Harvard, Vancouver, ISO, and other styles

Journal articles on the topic 'Fabry-Perot interferometers'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles