Academic literature on the topic 'Exposition RF-EMF'

The human concern about the effect of electromagnetic fields (EMFs) has changed over time from the effects produced by EMFs of extremely low frequencies (ELFs) to the effects produced by exposure to a radio frequency (RF), with concerns shifting toward EMFs due to the development of new technologies and forms of communication. Previous studies have analysed the effects produced at different frequencies without considering in detail the effect of the time of exposure. Therefore, in the present study, we analysed in vitro the effect produced by a 100 µT EMF at different ELFs and exposure times in glioblastomas, as well as the effect produced in a fibroblast by an RF-EMF of 2.54 GHz. Our results indicate a significant time dependence in cell viability of fibroblasts exposed to an RF-EMF of 2.54 GHz and a non-time-dependent effect in cell viability of glioblastomas exposed to an ELF-EMF, highlighting the possible relation between frequency and time of exposure.

There are many artificial sources of radiofrequency electromagnetic field (RF-EMF) in the environment, with a value between 100 MHz and 6 GHz. The most frequently used signal is with a frequency of around 900 MHz. The direction of these changes positively impacts the quality of life, enabling easy communication from almost anywhere in the world. All living organisms in the world feel the effects of the electromagnetic field on them. The observations regarding the influence of a RF-EMF on honey bees, describing the general impact of RF-EMF on the colony and/or behavior of individual bees, such as reduction in the number of individuals in colonies, extended homing flight duration, decrease in breeding efficiency, changes in flight direction (movement of bees toward the areas affected by RF-EMF), increase in the intensity and frequency of sounds characteristic for those announcing the impending danger. In this work, we describe the changes in the levels of some of the stress-related markers in honey bees exposed to varying intensities and duration of RF-EMF. One-day-old honeybee worker bees were used for the study. The bees were randomly assigned to 9 experimental groups which were exposed to the following 900 MHz EMF intensities: 12 V/m, 28 V/m, and 61 V/m for 15 min, 1 h and 3 h. The control group was not exposed to the RF-EMF. Each experimental group consisted of 10 cages in which were 100 bees. Then, hemolymph was collected from the bees, in which the activity was assessed AST, ALT, ALP, GGTP, and level of nonenzymatic antioxidants albumin, creatinine, uric acid, and urea. Bees were also collected for the analysis of rps5, ppo, hsp10, hsp70, hsp90, and vitellogenin gene expression. Our study shows that exposure to a 900 MHz electromagnetic field induces a response in the honey bees that can be detected in the level of enzyme activity and the expression of stress-related genes. The response is similar to the one previously described as a result of exposition to UVB irradiation and most likely cannot be attributed to increased temperature.

Introduction: This study is an introduction to the empirical and impact evaluation of radiofrequency electromagnetic field (RF-EMF) radiation exposure in a healthcare environment, focusing on an indoor microenvironment. It explores the expression of various genes associated with cellular responses, cell proliferation, senescence, and apoptotic cell death. The assessment analyzes current personal mobile communications (2G-5G FR1), providing a clear understanding of RF-EMF exposure and compliance with regulatory limits.Methods: The signals from different wireless communication systems at Hospital Universitario de Canarias (HUC) in Tenerife, Canary Islands, Spain, were examined in 11 locations. Four measurement campaigns were performed with frequency-selective exposimeters (PEMs) and an EME Spy 200 MVG, and experimental electric field values were compared as a long-term exposition. The frequency with the highest contribution (2.174 V/m) observed (1840 MHz) in UMTS was selected for biological effects evaluation.Results: The study focuses on four locations with the highest exposure to communication systems (downlinks), analyzing the results to verify compliance with regulations that ensure the safety of patients, the general public, and healthcare workers. LTE B20 (DL), GSM+UMTS 900 (DL), GSM 1800 (DL), UMTS 2100 (DL), and LTE B7 (DL) exhibited relatively higher E/m values throughout the campaigns, and these values consistently remained below the ICNIRP reference levels, signifying a consistently low level of exposure. In addition, this work presents the biological effects on neural stem cells (NSCs) using 3D brain organoids (BOs) exposed to RF signals in a validated and commercial experimental setting: the Gigahertz Transverse Electromagnetic cell (GTEM). The GTEM allows for the creation of homogeneous field electromagnetic fields in a small, enclosed setting and guarantees exposure conditions in a wide range of frequencies. BOs are an in vitro 3D cell-culture technology that reproduces the cellular composition and structure of the developing brain. Analyzing the expression of several genes associated with cellular responses, cell proliferation, senescence, and apoptotic cell death, we found that exposure of BOs at 1840 MHz did not affect mRNA expression in brain genes related to apoptosis or senescence. However, a decrease in gene expression for cell proliferation and cell activity markers was observed during the differentiation stage of BOs.Discussion: The discussion emphasizes the coexistence and evolution of various heterogeneous networks and services throughout the four measurement campaigns. Across all measured results, the levels of the obtained E-field were consistently well below the exposure limits set by internationally accepted standards and guidelines. These obtained values have been established in order to consider their potential effects on cell proliferation and cell activity, especially in differentiating biological organisms. Consequently, the results obtained and the methodology presented could serve as a foundational framework for establishing the basis of RF-EMF assessment in future heterogeneous 5G developments, particularly in the millimeter wave (mmWave) frequency range, where the forecast is for massive high-node density networks.

L'étude des émissions rayonnées d'une source dans tout l'espace, est essentielle pour l'analyse dosimétriques et l’analyse des interférences électromagnétiques. L'importance du dernier augmentent en raison de la nécessité d'avoir une prédiction de la fiabilité des circuits électroniques. De plus, l'utilisation quotidienne des dispositifs et des systèmes émettant des champs électromagnétiques radiofréquences ne cesse d'augmenter. Certains de ces dispositifs fonctionnent à proximité du corps humain, et les opérateurs se trouvent dans la région des champs proches de la source rayonnante, et ils sont exposés à des niveaux de champs électromagnétiques pouvant être élevés. Pour cette raison, l'analyse dosimétrique, qui passe par une cartographie tridimensionnelle (3D) au voisinage de la source rayonnante, doit être effectuée. Pour ce type d'applications, plusieurs scans des champs proches doivent être effectués dans différents plans afin de construire la cartographie de champs 3D. Étant un processus difficile dans les études de compatibilité électromagnétique, la caractérisation en champ proche est traitée par plusieurs algorithmes qui proposent différentes approches pour réaliser le scanning requis au voisinage de la source rayonnante.Dans ce travail, nous introduisons un système de scanning 3D avec des sondes de champ magnétique à trois axes à faible coût. Le fait de disposer de telles sondes permet la mesure simultanée des trois composantes du champ magnétique sur la base d'un seul scan au voisinage du dispositif testé. Les sondes conçues se composent de trois boucles orthogonales combinées ensemble; la première sonde contient trois boucles conventionnelles réunies dans un cube en plastique d'une dimension totale de 10 × 12 × 13 mm3, tandis que la deuxième sonde est une sonde PCB imprimée sur un substrat FR4 de 3,2 mm avec une dimension réduite de 9 × 9 × 3,2 mm3. Les sondes conçues ont été étalonnées avec une cellule TEM et les facteurs d'antenne correspondants ont été extraits. Le système de scanning présenté utilise comme un instrument de mesure un oscilloscope RF- 4 canaux, qui donne la possibilité de mesurer à la fois dans le domaine temporel et dans le domaine fréquentiel.La deuxième partie de cette thèse présente un algorithme de reconstruction basé sur la méthode du spectre d'ondes planes. Afin de réduire le nombre des scans et donc les exigences de temps, l'algorithme présenté nécessite juste un scan en champ proche 2D des composantes de champ, pour reconstruire la distribution du champ magnétique 3D au-dessus du dispositif rayonnant.La troisième partie de la thèse est consacrée à l'analyse dosimétrique des champs électromagnétiques rayonnés à proximité des systèmes RFID et des machines de soudage RF. L'évaluation de l'exposition en champ proche des champs rayonnés des antennes de lecture RFID, fonctionnant à 13,56 MHz et utilisées dans les bibliothèques, a été réalisée. Les mesures du champ magnétique près de l'antenne ont été établies à l'aide des sondes conçues. Les résultats sont ensuite analysés et comparés aux réglementations des normes européennes et des lignes directrices de l'ICNIRP. En outre, l'exposition aux champs électromagnétiques RF des travailleurs à proximité de machines de soudage RF dans un environnement industriel est étudiée. Ces machines, fonctionnant à 27 MHz, émettent de forts rayonnements et l'exposition a eu lieu dans la région de champ proche. La distribution spatiale des champs électromagnétiques dans cette région est étudiée à la fois dans des simulations numériques et des mesures réelles
The analysis of radiated emissions from a source throughout the space, is very essential for both dosimetric and electromagnetic interference analysis. The concerns about the latter are growing because of the need to have prediction of the system reliability of the electronic circuits. Moreover the everyday use of devices and systems emitting radio frequency electromagnetic fields is continuously increasing. Some of these devices are operating in the vicinity of human body, and operators are in the near-field region of the radiating source, and they are exposed to electromagnetic fields. For this reason, dosimetric analysis, that shows the necessity of having three dimensional (3D) field mapping in the vicinity of the radiating source, should be performed. For this kind of applications, several scans of the near fields should be done within different planes in order to build the 3D field mapping. Being a challenging process in electromagnetic compatibility studies, near field characterization is being treated by several algorithms that propose different approaches to achieve the required scanning on the radiating source.In this work, we introduce a 3D scanning system with a low cost three axis magnetic field probes. Having such probes allow the simultaneous measure of the three components of the magnetic field based on a single planner scan above the device under test. The designed probes consist of three orthogonal loops combined together; the first probe contains three conventional loops joined in a plastic cube with a total dimension of 10×12×13 mm3, whereas the second probe is a PCB probe printed on an FR4 substrate of 3.2 mm with a reduced dimension of 9×9×3.2 mm3. The designed probes were calibrated with a TEM cell and the corresponding antenna factors were extracted. The presented scanning system uses an oscilloscope as a measuring instrument that gives the possibility of both time and frequency domain measurements. The second part of this thesis presents a reconstruction algorithm based on plane wave spectrum method. In order to reduce the number of scans and hence the time requirements, the presented algorithm requires just a 2D near field scan of the field components, to reconstruct the 3D magnetic field distribution above the radiating device.The third part of the thesis is devoted for the dosimetric analysis of the radiated electromagnetic fields near RFID systems and RF-welding machines. The near-field exposure assessment of the radiated fields from RFID reader antennas operating at 13.56 MHz and used in Libraries was performed. The measurements of the magnetic field near the antenna were established using the designed probes. The results are then analyzed and compared to the regulations in European Directives and ICNIRP Guidelines. Moreover, the exposure to RF electromagnetic fields of workers near RF-welding machines in industrial environment is studied. These machines, operating at 27 MHz, emit strong radiation and the exposure takes place in the near-field region. The spatial distribution of the electromagnetic fields in this region is studied in both numerical simulations and measurements

L'architecture conventionnelle utilisée par toutes les publications précédentes pour le récepteur de balayage de spectre est basée sur le CAN en BB, donc il a une consommation d'énergie élevée, une complexité plus élevée et souffre d'inadéquations de circuits et de non-linéarité. Dans ce travail, nous proposons d'utiliser un récepteur RF basé sur CAN delta-sigma en PB. Les CAN PB DS ajustables précédemment signalés implémentée de manière complexe. Nous présentons une implémentation efficace du CAN PB DS accordable. Un récepteur de détection de spectre, basé sur l'architecture frontale RF à faible consommation d'énergie proposée dans cette thèse, est également proposé. Le récepteur complet proposé ne souffre pas d'un déséquilibre 1/Q. Les résultats de simulation pour montrer l'impact de la non-linéarité du circuit sur les performances sont présentés. Une implémentation de circuit d'un backend numérique du système proposé est présentée. Cette implémentation comprend un mélangeur à conversion descendante efficace, un filtre de décimation, un bloc FFT et un module de détection d'énergie. L'implémentation a été validée à l'aide l'outil SignalTab. Des études, ne présentent que des résultats analytiques ou de simulation, visant à montrer l'impact du déséquilibre 1/Q sur les performances de détection du spectre ont déjà été publiées. Dans ce travail, nous présentons la première mesure matérielle du déséquilibre I/Q sur les performances de détection du spectre. Dans le domaine médical, nous présentons pour la première fois une étude de l'effet de l'exposition aux RF-EMF sur les nouveau-nés via une acquisition simultanée de signaux RF et de paramètres physiologiques
Spectrum sensing applications cover wide variety, such as efficient utilization of frequency spectrum, and in medical applications. The conventional architecture used by all the previous publications for spectrum sensing receiver is based on baseband ADC, hence it has high power consumption, higher complexity, and suffers from circuit mismatches and nonlinearity. In this work, we propose using an RF receiver based on bandpass delta-sigma ADC. It is much more convenient to have a tunable BP ΔΣ ADC to simplify the spectrum sweeping task. The previously reported tunable BP ΔΣ ADC’s are implementing tunability in a complex manner. We present an efficient implementation of tunable BP ΔΣ ADC with fixed ratio between the sampling frequency and center frequency. That fixed ratio further simplifies the implementation of the down conversion mixer and decimation filter which serve as the digital backend of the receiver. A spectrum sensing receiver, based on the power-efficient RF front end architecture proposed in this thesis, is also proposed. The proposed complete receiver does not suffer from I/Q imbalance that highly affect the spectrum sensing performance. Simulation results to show the circuit nonlinearity impact on the performance are presented. A circuit implementation of a digital backend of the proposed system is presented. This implementation comprises an efficient down conversion mixer, decimation filter, custom FFT block, and energy detection module. The implementation was validated on Altera FPGA using the on-chip logic analyzer via the SignalTab tool.Studies to show the impact of I/Q imbalance on spectrum sensing performance were previously published. Nevertheless, those publications presented only either analytical or simulation results. In this work, we present the first hardware measurement of the I/Q imbalance on spectrum sensing performance using a commercial SDR transceiver platform.In the medical field, we also present for the first time a study of the effect of RF-EMF exposure on neonates by performing a simultaneous acquisition of RF signals along with recording the physiological parameters of neonates. Using R-Studio, the stationarity of the signals to be correlated was checked, a transformation was performed on the non-stationary signals. Finally, cross correlation between the acquired RF signal (average of the whole spectrum or in a specific band) and each of the recorded physiological parameters did not show an observable impact of RF-EMF exposure on neonates