Academic literature on the topic 'Everyone Must Die'

The lack of diversity in academic philosophy has been well documented. This paper examines the reasons for this issue, identifying two intertwining norms within philosophy which contribute to it: the assertion that the Adversary Method is the primary mode of argumentation and the excessive boundary policing surrounding what constitutes “real” philosophy. These norms reinforce each other, creating a space where diverse practitioners must defend their work as philosophy before it can be engaged with philosophically. Therefore, if we are to address the diversity issue, these norms must change. I advocate for the community of philosophical inquiry to serve as a new standard of practice, as it requires a simultaneous reimagining of both norms, thereby addressing the issues that arise from the two elements working in tandem. With its emphasis on epistemic openness and constructive collaboration, and a broader definition of philosophy which conceptualizes it as a method of questioning/analyzing rather than a particular subject matter, I posit that its implementation would facilitate a more welcoming climate for diverse practitioners. While these changes are unlikely to solve the diversity problem “once and for all,” I argue that they would significantly help to improve it.

The application of PCG to generate puzzles offers great value since their replayability is severely limited, requiring any game that employs them to produce many different puzzles. In this paper we propose a modified version of the progressive content generation approach to function as a mixed-initiative system, to create puzzles for the novel partially physics-based game \textit{Everyone Must Die}. Thus exploring the adaptability and usefulness of the progressive content generation approach for a unique type of puzzle game. Further the mixed-initiative system is explored in relation to how effectively it can generate puzzles with a specified difficulty, an issue many papers exploring puzzle generation neglect. This is explored by implementing and incorporating a PCG system by extending an existing puzzle editor featured in the game. The analysis is conducted with the help of a user study on the developers of the game by testing qualitative experiences with the system. The promising results are then discussed and concluded with suggestions for future work and improvements to the described system and its used approach.

Abstract This chapter provides four models of higher education for the year 2030, namely the Tamagotchi, Jenga, Lego Set, and Transformer models. The Tamagotchi model represents the classic approach to higher education, starting right after secondary school and leading up to a bachelor’s or master’s degree and then transitioning into employment, finishing the path of higher education. The Jenga model, while similar to Tamagotchi, appeals to nontraditional students because of its shorter learning span and focuses on later phases of self-learning and -organization. The Lego Set model is fittingly named after the individually combined modules of different sizes, making for a self-reliant and non-standardized learning path rather than one compact unit. The Transformer model represents learners whose initial phase of education may have long passed, but who return to higher education to acquire new basic knowledge or upskill their formal education. It relies on the idea that everyone must have opportunities to leave their current professional paths and change course.

Abstract New emerging digital technologies such as artificial intelligence, virtual reality, augmented reality, cloud computing, blockchain, robotization, the Internet of Things, big data, etc. have produced a powerful disruptive effect in almost all areas of our existence and have radically changed the way we live, work, learn or relax. Without consciously realizing it, everyone is adapting to the digital era. As nothing “escapes” the all-encompassing digital transformation, higher education follows track too. So, it is natural to ask ourselves: what are the higher education institutions doing to keep up with this rapidly evolving digital world? In this paper, we present the case of West University of Timişoara as an example of good practice in dealing with the effects of digital transformation on the university and its academic community (teachers, students, administrative staff). Our goal is to gain an understanding of what is being proposed through the institutional development strategy, and what is actually happening in our university from the digitalization perspective. Thus, we conduct an exploratory research using a quantitative approach that involves a survey applied to students enrolled in different study programs, at different levels. We focus on their opinion about how our university can prepare and transform in order to adopt an integrated digital approach, looking into topics like: technology-enabled services, digital enrollment of students, digitization of the administrative processes, implementation of digital procedures to offer recommendations or file complains, digital curricula, new modes of digital learning delivery, etc. Our findings reveal that West University of Timişoara must take significant steps towards the implementation of digital transformations, while, however, remaining watchful and cautious of the hidden implications of this process.

Arguing that discourses on AI must engage with power and political economy this chapter, in particular, makes the case that we must move beyond the depoliticised language of ‘ethics’ currently deployed in determining whether AI is ‘good’ given the limitations of ethics as a frame through which AI issues can be viewed. In order to circumvent these limits, we use instead the language and conceptualisation of ‘Good Data’ which we view as a more expansive term to elucidate the values, rights and interests at stake when it comes to AI’s development and deployment. These considerations include, but go beyond privacy, as well as fairness, transparency and accountability to include explicit political economy critiques of power.

<p>In urban areas, besides structures such as bridges and buildings, big sculptures are each day more common as major pieces of public art. Although these artworks are not meant to satisfy needs as housing or transport, they play an important role in the city: they are major pieces of art made accessible to everyone that enhance the environment and contribute to the urban planning.</p><p>Major sculptures must withstand the same load types as the rest of the city’s infrastructure, for example strong winds and earthquakes. The analysis of these structures is an unorthodox field for civil engineers where new challenges appear: complex shapes, innovative materials, new fabrication techniques… Moreover, public art is a field that continually evolves. Art and engineering become two aspects of the same creative process and the interaction between professionals is fundamental.</p><p>In this work, several success cases in design, fabrication and installation of artworks by some international artists in inhabited areas all over the world are presented. We reflect on the limits in analysis and design focusing on the limitations imposed by the engineering codes. The search for compromise solutions that produce safe structures that still send the artist’s message is also discussed.</p>

"During lockdown and the severe restrictions aimed to combat the COVID-19 pandemic, in Italy great consideration has been given to “smart working” (SW). This term refers to a form of work characterized by the absence of time or space restrictions and an organization by phases, cycles, and objectives. The requirements for SW are: work must be carried out electronically; the tools must be adequate; performance must be measurable and focused on objectives; employees must have a suitable place to get their work done. These requirements ensure that the essential objectives of SW are attained: replacing the logic of performing tasks with that of achieving objectives; allowing everyone to manage work actively and autonomously; stimulating more decisive accountability in work, and better performance. Since the COVID-19 outbreak, action-research interventions have been conducted by private and public organizations. The private sector has endeavored to meet the requirements described above. This has not always been the case in the public sector, where largely widespread and indiscriminate use of SW has been made, not always complying with the protocols. However, even within the “emergency” limits of these experiences, SW has generally been accepted. The main advantages reported by employees are time and money saved on travel and food, in addition to improved family life. However, some problems have also emerged. These include the perception of social isolation; difficulty in disconnecting from technology; inadequacy of the tools; inadequate communication with managers. We also found that the health conditions of some “smart workers” have worsened in terms of anxiety, sleep disorders, and emotional symptoms. The data clearly show the complexity of analyses and interventions in relation to the SW phenomenon. The protection of employees’ health, especially in terms of recovery and work-family balance, appears to be particularly complex. In this context, the authors’ experience shows that online psychology has become more significant because it allows to support employees at any time. The literature highlights the growing use of online psychological support also through smartphone apps that provide effective interventions anywhere. Therefore, if, on the one hand, the requirements, objectives, and good practices of SW are to be pursued to limit the critical issues that have arisen, on the other, organizations should provide psychological support to employees even at a distance and by using appropriate technologies."

Innovation in education entails not only the incorporation of technological tools and applications, but also the implementation of methodologies that could break the inertia and incorporate processes of Divergent Thinking. Future teachers must be creative professionals capable of developing professional activities to improve and not only to replicate the social experience in order to create new learning experiences. In this way, the main aim of our work was to explore how the use of Design Thinking Methodology improves learning processes in a group of 75 college students of the Primary Education Degree. This group of students, divided into 21 smaller working groups, created different educational videos and multimedia design projects through Design Thinking methodology. They were also encouraged to use Social Networks (specifically Instagram) to present and publicize the progress they were making on their work, in order to obtain feedback from their classmates. All the projects developed were related to three thematic areas: Art for everyone; Attention to diversity and Making great neighborhoods. At the end of the creation process, we analysed the students’ perception of how the design thinking methodology helps them through their learning process. Based on an ad hoc questionnaire, the impact of the use of Design Thinking in the learning process and its influence on variables such as motivation, communication, creativity, among others, was studied. The results show that the use of this methodology had a positive impact on practically all the variables, facilitating and optimizing the learning process of future teachers.

The operability and efficiency of critical pumping equipment is essential. A cost-effective tool that has proven valuable in predictive and preventive maintenance and in the avoidance of unscheduled pumping equipment outages is a comprehensive program of periodic hydraulic and mechanical performance audits. This paper explains how hydraulic and mechanical field testing can be conducted without interrupting plant operations using non-intrusive measurement equipment including: ultrasonic flow measurements, vibration signature analysis, and for electric motor driven pumps, power and dielectric condition analysis. Methods and requirements to conduct the audits will be discussed and a case study with cost benefit analysis is presented. Pumps are basically energy transfer devices. The energy of the pump driver, e.g. electric motor, steam or gas turbine, reciprocating engine, is transferred into the pumpage to move it through the system at sufficient pressure to overcome system losses and meet process requirements. It is the efficient transference of the applied energy that is a critical consideration in pump design and operation. Efficiency of operation is of interest to everyone. The pump designer is motivated to maximize pump efficiency to remain competitive given the increasing cost of energy. However, the designer must not get overly zealous in the quest for pumping efficiency sacrificing reliability and durability. The end-user wants the most efficient pump with longest mean time between repair (MTBR) intervals to both reduce operating cost and minimizing production losses. With the reasons for maximizing pumping efficiencies and longer MTBR intervals established, the value of periodic in situ performance testing or auditing becomes an increasingly valuable and cost effective predictive and preventative maintenance tool.

Nearly everyone, throughout their life, is at risk of being involved in a serious traumatic event, such as motor vehicle accidents, sports and occupational injuries, or natural disaster related injuries. Twenty-eight percent of trauma patients precipitously develop abnormalities in their blood coagulation system. These coagulopathies increase their mortality rate by 5fold. The current coagulopathy diagnosis protocol collects basic patient information, vital signs, and performs traditional lab and point-of-care (POC) blood testing. A high-stakes decision must then be made by the trauma surgeon, using their intuition, training, and the results from the blood drawn at least 15 minutes prior, to determine the requirement for a resuscitation treatment through coagulation inhibitors or activators. Computational modeling and system analysis of the human blood coagulation are integral to developing superior decision support tools for trauma surgeons. In short, the coagulation system consists of the following functional subsystems: 1) blood flow, 2) platelet function, 3) diffusion, 4) advection, and 5) biochemical kinetics. We utilize a combined approach of both 0-D and 3-D model development with the overarching goal of developing a validated, near real-time decision support system. The biochemical kinetics of the coagulation system is implemented in the 0-D model with a set of 113 nonlinear, coupled ordinary differential equations (ODEs), describing the time rate of change of the numerous chemical concentrations and their interaction with one another. 0-D models provide a fast, efficient means of simulating the coagulation biochemical kinetics, but these ODEs lack the ability to describe the global effects of fluid flow, advection, and diffusion. Hence, the set of 113 ODEs are modeled as source terms and combined with the Navier-Stokes and chemical advection/diffusion equations in a three-dimensional finite volume computational domain, providing a global coagulation model. Model validation studies employ parallel experimental POC blood testing and 3-D computational modeling. Results from the 0-D model are consistent with testimonials from expert trauma surgeons, whom verify the model provides appropriate reasoning for their difficulties in predicting patient outcome. Thus, validated computational models have potential as a hypothesis generator used for developing new approaches for providing trauma surgeons with sufficient information to make better informed clinical decisions, “the decision support tool,” leading to decreased mortality.

The situation of women in the engineering world has different aspects. On the one hand, it can be stated that women are well received in certain areas of the technological world, and they are very integrated into academia. In other areas, such as the world of industrial business, recognition is more complex being those less open environments. Last century, the woman who broke the taboo in Spain was the mayor of Bilbao and the first industrial engineer graduated in Spain in 1912, Pilar Careaga. By means of her public presence, her message could reach the general society, but as something exceptional. At the Faculty of Engineering in Bilbao, the first female Industrial Engineer was Pilar Ipiña, graduated in 1965. Fifty-three years had passed. Women in Engineering, more than a century later, remain a clear minority. While it is true that the presence of women in engineering schools is socially fully accepted, it is no less true that many young women dismiss the possibility of approaching that world from an early age. The lack of benchmarks seems to be a clear factor. Many of the engineers who are being interviewed in the search for ideas to motivate girls and young women, end up seeing lacks of references when asked about it. While the experience of being a woman in such a traditionally male field has lights and shadows, reflect of what can be seen in different referenced studies, a positive message must be transmitted, as this has been the experience of both engineering students and workers in academia or in the business world. Proposing solutions to smooth out the differences in numbers between men and women in the world of Engineering and Science requires knowing the causes, in order to be able to carry out actions that lead to collecting women's talent and with the appropriate training give it all the value that can achieve, both in the improvement of society as a whole and in the personal development of each of them. The aim is to achieve real equal choice between women and men and put everyone at the service of a better society. Equality is theoretically achieved, but it can still be improved.

A good public space must be accommodative for everyone including the marginal, the forgotten, the silent, and an undesirable people. With the process of development, the city leaves behind the marginalized section of the society especially urban poor, who constitute about 20-30 percent of the urban population and are majorly involved in informal settlement like congested housing typologies and informal economy in which they face the everyday social, physical and economic exclusion. Thus, the informal sector and the marginalized becomes the forgotten elements in urban space. ‘Cities for the Citizen’ a slogan described by Douglas address the same issues of democratization, multicultural/gender difference between humans. Though these people have strong characteristics and share a unique pattern and enhances the movement in the city which makes a city a dynamic entity. The lack of opportunities and participation to such section leaves the city divided and generates the negative impacts in the mind of victims which further leads to degradation of their mental health and city life because of their involvement in crime, unemployment, illiteracy and unwanted areas. The physical, social, cultural and economic aspects of space should accommodate the essential requirements for the forgotten and provide them with inclusive public environment. It is very necessary that they generate the association and attachment to the place of their habitation. We can easily summarize that the city which used to be very dynamic and energetic is now facing the extreme silence in the present pandemic times. The same people are returning back to their homes after facing the similar problems of marginalization and exclusion even during hard times where they had no place to cover their heads. So, we have to find the way in which they can be put into consideration and make them more inclusive and self-sustaining. With the economic stability, social stability is also equally necessary for the overall development of an individual. So, the paper tries to focus upon the idea of self-sustaining livelihood and social urbanism which talks about development of cities aiming to the social benefit and upliftment of their citizen. The social urbanism strategy in any project tries to inject investment into targeted areas in a way that cultivates civic pride, participation, and greater social impact. Thus, making the cities inclusive and interactive for all the development. The paper will tries to see such spaces as a potential investment in term of city’s finances and spaces to generate a spatial & development toolkit for making them inclusive by improving the interface of social infrastructure.

Accessible design is crucial on education because it provides equally opportunities of fulfilling everyone’s potential, and it helps the education community to transmit the values of an openminded and empathic society where its diversity is standardised. Children realise about this diversity from the very early stages and won’t be able to learn these values naturally if they are not equally able to interact with the environment that surrounds them. A link between designers and educators must be created in order to include accessible and assistive products in every education facility and exchange their experiences and opinions, so the design of accessible products, environments and services solves real needs and keeps improving.

This report maps the African landscape of Open Science – with a focus on Open Data as a sub-set of Open Science. Data to inform the landscape study were collected through a variety of methods, including surveys, desk research, engagement with a community of practice, networking with stakeholders, participation in conferences, case study presentations, and workshops hosted. Although the majority of African countries (35 of 54) demonstrates commitment to science through its investment in research and development (R&D), academies of science, ministries of science and technology, policies, recognition of research, and participation in the Science Granting Councils Initiative (SGCI), the following countries demonstrate the highest commitment and political willingness to invest in science: Botswana, Ethiopia, Kenya, Senegal, South Africa, Tanzania, and Uganda. In addition to existing policies in Science, Technology and Innovation (STI), the following countries have made progress towards Open Data policies: Botswana, Kenya, Madagascar, Mauritius, South Africa and Uganda. Only two African countries (Kenya and South Africa) at this stage contribute 0.8% of its GDP (Gross Domestic Product) to R&D (Research and Development), which is the closest to the AU’s (African Union’s) suggested 1%. Countries such as Lesotho and Madagascar ranked as 0%, while the R&D expenditure for 24 African countries is unknown. In addition to this, science globally has become fully dependent on stable ICT (Information and Communication Technologies) infrastructure, which includes connectivity/bandwidth, high performance computing facilities and data services. This is especially applicable since countries globally are finding themselves in the midst of the 4th Industrial Revolution (4IR), which is not only “about” data, but which “is” data. According to an article1 by Alan Marcus (2015) (Senior Director, Head of Information Technology and Telecommunications Industries, World Economic Forum), “At its core, data represents a post-industrial opportunity. Its uses have unprecedented complexity, velocity and global reach. As digital communications become ubiquitous, data will rule in a world where nearly everyone and everything is connected in real time. That will require a highly reliable, secure and available infrastructure at its core, and innovation at the edge.” Every industry is affected as part of this revolution – also science. An important component of the digital transformation is “trust” – people must be able to trust that governments and all other industries (including the science sector), adequately handle and protect their data. This requires accountability on a global level, and digital industries must embrace the change and go for a higher standard of protection. “This will reassure consumers and citizens, benefitting the whole digital economy”, says Marcus. A stable and secure information and communication technologies (ICT) infrastructure – currently provided by the National Research and Education Networks (NRENs) – is key to advance collaboration in science. The AfricaConnect2 project (AfricaConnect (2012–2014) and AfricaConnect2 (2016–2018)) through establishing connectivity between National Research and Education Networks (NRENs), is planning to roll out AfricaConnect3 by the end of 2019. The concern however is that selected African governments (with the exception of a few countries such as South Africa, Mozambique, Ethiopia and others) have low awareness of the impact the Internet has today on all societal levels, how much ICT (and the 4th Industrial Revolution) have affected research, and the added value an NREN can bring to higher education and research in addressing the respective needs, which is far more complex than simply providing connectivity. Apart from more commitment and investment in R&D, African governments – to become and remain part of the 4th Industrial Revolution – have no option other than to acknowledge and commit to the role NRENs play in advancing science towards addressing the SDG (Sustainable Development Goals). For successful collaboration and direction, it is fundamental that policies within one country are aligned with one another. Alignment on continental level is crucial for the future Pan-African African Open Science Platform to be successful. Both the HIPSSA ((Harmonization of ICT Policies in Sub-Saharan Africa)3 project and WATRA (the West Africa Telecommunications Regulators Assembly)4, have made progress towards the regulation of the telecom sector, and in particular of bottlenecks which curb the development of competition among ISPs. A study under HIPSSA identified potential bottlenecks in access at an affordable price to the international capacity of submarine cables and suggested means and tools used by regulators to remedy them. Work on the recommended measures and making them operational continues in collaboration with WATRA. In addition to sufficient bandwidth and connectivity, high-performance computing facilities and services in support of data sharing are also required. The South African National Integrated Cyberinfrastructure System5 (NICIS) has made great progress in planning and setting up a cyberinfrastructure ecosystem in support of collaborative science and data sharing. The regional Southern African Development Community6 (SADC) Cyber-infrastructure Framework provides a valuable roadmap towards high-speed Internet, developing human capacity and skills in ICT technologies, high- performance computing and more. The following countries have been identified as having high-performance computing facilities, some as a result of the Square Kilometre Array7 (SKA) partnership: Botswana, Ghana, Kenya, Madagascar, Mozambique, Mauritius, Namibia, South Africa, Tunisia, and Zambia. More and more NRENs – especially the Level 6 NRENs 8 (Algeria, Egypt, Kenya, South Africa, and recently Zambia) – are exploring offering additional services; also in support of data sharing and transfer. The following NRENs already allow for running data-intensive applications and sharing of high-end computing assets, bio-modelling and computation on high-performance/ supercomputers: KENET (Kenya), TENET (South Africa), RENU (Uganda), ZAMREN (Zambia), EUN (Egypt) and ARN (Algeria). Fifteen higher education training institutions from eight African countries (Botswana, Benin, Kenya, Nigeria, Rwanda, South Africa, Sudan, and Tanzania) have been identified as offering formal courses on data science. In addition to formal degrees, a number of international short courses have been developed and free international online courses are also available as an option to build capacity and integrate as part of curricula. The small number of higher education or research intensive institutions offering data science is however insufficient, and there is a desperate need for more training in data science. The CODATA-RDA Schools of Research Data Science aim at addressing the continental need for foundational data skills across all disciplines, along with training conducted by The Carpentries 9 programme (specifically Data Carpentry 10 ). Thus far, CODATA-RDA schools in collaboration with AOSP, integrating content from Data Carpentry, were presented in Rwanda (in 2018), and during17-29 June 2019, in Ethiopia. Awareness regarding Open Science (including Open Data) is evident through the 12 Open Science-related Open Access/Open Data/Open Science declarations and agreements endorsed or signed by African governments; 200 Open Access journals from Africa registered on the Directory of Open Access Journals (DOAJ); 174 Open Access institutional research repositories registered on openDOAR (Directory of Open Access Repositories); 33 Open Access/Open Science policies registered on ROARMAP (Registry of Open Access Repository Mandates and Policies); 24 data repositories registered with the Registry of Data Repositories (re3data.org) (although the pilot project identified 66 research data repositories); and one data repository assigned the CoreTrustSeal. Although this is a start, far more needs to be done to align African data curation and research practices with global standards. Funding to conduct research remains a challenge. African researchers mostly fund their own research, and there are little incentives for them to make their research and accompanying data sets openly accessible. Funding and peer recognition, along with an enabling research environment conducive for research, are regarded as major incentives. The landscape report concludes with a number of concerns towards sharing research data openly, as well as challenges in terms of Open Data policy, ICT infrastructure supportive of data sharing, capacity building, lack of skills, and the need for incentives. Although great progress has been made in terms of Open Science and Open Data practices, more awareness needs to be created and further advocacy efforts are required for buy-in from African governments. A federated African Open Science Platform (AOSP) will not only encourage more collaboration among researchers in addressing the SDGs, but it will also benefit the many stakeholders identified as part of the pilot phase. The time is now, for governments in Africa, to acknowledge the important role of science in general, but specifically Open Science and Open Data, through developing and aligning the relevant policies, investing in an ICT infrastructure conducive for data sharing through committing funding to making NRENs financially sustainable, incentivising open research practices by scientists, and creating opportunities for more scientists and stakeholders across all disciplines to be trained in data management.