Relevant bibliographies by topics / Energy and power density

Academic literature on the topic 'Energy and power density'

Author: Grafiati
Published: 14 March 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Energy and power density.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Energy and power density"

1

Xu, Lifeng, Jiaqing Chu, Jingwen Wang, Yan Zhou, and Dongsheng Wang. "Effects of Process Parameters on Density of GH5188 High-temperature Alloy after Selective Laser Melting." Journal of Physics: Conference Series 2355, no. 1 (October 1, 2022): 012077. http://dx.doi.org/10.1088/1742-6596/2355/1/012077.

Full text
Abstract:
Abstract GH5188 high-temperature alloy specimens were fabricated by selective laser melting (SLM) and influencing laws of laser power, laser velocity and laser energy density on density of specimens were researched. The results shows that along with the laser energy density increases from 73.02 J/mm3 to 88.18 J/mm3, porosity in specimens decrease and relative density increases from 98.86% to 99.75%. However, as the laser energy density increase further, the density begins to decrease continuously. The main causes that effects relatively density including: the powder is not fused at low energy density, as well as the powder splash and gasification at higher energy density. Neither inadequate nor excessive laser energy density is conducive to improvement of density of specimens. As the increase of laser velocity and laser power, density of specimens increases firstly and then decreases. The variation trend of relative density is similar with that of laser energy density and there are reasonable ranges of laser velocity and laser power. However, influencing laws of laser velocity and laser power on density of specimens are different.
APA, Harvard, Vancouver, ISO, and other styles
2

Hubler, Alfred. "Synthetic atoms: Large energy density and a record power density." Complexity 18, no. 4 (January 22, 2013): 12–14. http://dx.doi.org/10.1002/cplx.21440.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Boudraa, Abdel-Ouahab, Thierry Chonavel, and Jean-Christophe Cexus. "-energy operator and cross-power spectral density." Signal Processing 94 (January 2014): 236–40. http://dx.doi.org/10.1016/j.sigpro.2013.05.022.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Nozariasbmarz, Amin, Ravi Anant Kishore, Bed Poudel, Udara Saparamadu, Wenjie Li, Ricardo Cruz, and Shashank Priya. "High Power Density Body Heat Energy Harvesting." ACS Applied Materials & Interfaces 11, no. 43 (October 2, 2019): 40107–13. http://dx.doi.org/10.1021/acsami.9b14823.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Lyshevski, Sergey Edward. "High-power density miniscale power generation and energy harvesting systems." Energy Conversion and Management 52, no. 1 (January 2011): 46–52. http://dx.doi.org/10.1016/j.enconman.2010.06.030.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Buceti, Giuliano. "Sustainable power density in electricity generation." Management of Environmental Quality: An International Journal 25, no. 1 (January 7, 2014): 5–18. http://dx.doi.org/10.1108/meq-05-2013-0047.

Full text
Abstract:
Purpose – When comparing renewables with fossil fuels, emotional approaches are fuelled by the difficulties in defining a proper metric able to make consistent comparisons among energy sources. In literature several approaches have been proposed, all effective in some way but ineffective in others. Variables like energy density, prices, estimated resources, life time emissions, water use and waste, all come at the same time to form an unmanageable mix. This paper discuss the adoption of a shared metric to clarify the boundary conditions that limit the solutions can be operated and to define which scenarios are sustainable and which are not. Design/methodology/approach – Energy density and power density are the cornerstones of the physical limitations in the exploitation of the energy sources. On this basis, a novel classification of energy sources, volumetric and flowing, has been proposed and discussed in light of three parameters: abundance, power density and sustainability. Eventually, an extended definition of power density based on life-cycle assessment is adopted. Findings – Sustainable power density makes possible compare the different energy options and shows how limitation in land comes to be the root of all resources limitations. Originality/value – A definition of a unique parameter is proposed and pros and cons of all energy options are calculated and put in a single graphic providing new insights into the energy policy.
APA, Harvard, Vancouver, ISO, and other styles
7

MacKay, David J. C. "Solar energy in the context of energy use, energy transportation and energy storage." Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 371, no. 1996 (August 13, 2013): 20110431. http://dx.doi.org/10.1098/rsta.2011.0431.

Full text
Abstract:
Taking the UK as a case study, this paper describes current energy use and a range of sustainable energy options for the future, including solar power and other renewables. I focus on the area involved in collecting, converting and delivering sustainable energy, looking in particular detail at the potential role of solar power. Britain consumes energy at a rate of about 5000 watts per person, and its population density is about 250 people per square kilometre. If we multiply the per capita energy consumption by the population density, then we obtain the average primary energy consumption per unit area, which for the UK is 1.25 watts per square metre. This areal power density is uncomfortably similar to the average power density that could be supplied by many renewables: the gravitational potential energy of rainfall in the Scottish highlands has a raw power per unit area of roughly 0.24 watts per square metre; energy crops in Europe deliver about 0.5 watts per square metre; wind farms deliver roughly 2.5 watts per square metre; solar photovoltaic farms in Bavaria, Germany, and Vermont, USA, deliver 4 watts per square metre; in sunnier locations, solar photovoltaic farms can deliver 10 watts per square metre; concentrating solar power stations in deserts might deliver 20 watts per square metre. In a decarbonized world that is renewable-powered, the land area required to maintain today's British energy consumption would have to be similar to the area of Britain. Several other high-density, high-consuming countries are in the same boat as Britain, and many other countries are rushing to join us. Decarbonizing such countries will only be possible through some combination of the following options: the embracing of country-sized renewable power-generation facilities; large-scale energy imports from country-sized renewable facilities in other countries; population reduction; radical efficiency improvements and lifestyle changes; and the growth of non-renewable low-carbon sources, namely ‘clean’ coal, ‘clean’ gas and nuclear power. If solar is to play a large role in the future energy system, then we need new methods for energy storage; very-large-scale solar either would need to be combined with electricity stores or it would need to serve a large flexible demand for energy that effectively stores useful energy in the form of chemicals, heat, or cold.
APA, Harvard, Vancouver, ISO, and other styles
8

Choi, Christopher, David S. Ashby, Danielle M. Butts, Ryan H. DeBlock, Qiulong Wei, Jonathan Lau, and Bruce Dunn. "Achieving high energy density and high power density with pseudocapacitive materials." Nature Reviews Materials 5, no. 1 (October 1, 2019): 5–19. http://dx.doi.org/10.1038/s41578-019-0142-z.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Xu, Hui Bin, and Kui Zhang. "The UWB Signals of Power Spectral Density." Advanced Materials Research 472-475 (February 2012): 2748–51. http://dx.doi.org/10.4028/www.scientific.net/amr.472-475.2748.

Full text
Abstract:
System or the waveform is energy, or has the power value. Generally, periodic signal and random signal is power signal,while the determine nonperiodic signal is energy signal. For the energy signal,we can use the energy spectrum density to describe the signal on the energy unit bandwidth,the unit is the joule/Hertz.For the power signal,we can use the power spectral density to describe the signal on the energy unit bandwidth,the unit for w/Hertz.
APA, Harvard, Vancouver, ISO, and other styles
10

Pellemoine, Frederique. "High power density targets." Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 317 (December 2013): 369–72. http://dx.doi.org/10.1016/j.nimb.2013.06.038.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Energy and power density"

1

Lyu, Xiaofeng. "High-Power-Density Converter for Renewable Energy Application." Diss., North Dakota State University, 2017. https://hdl.handle.net/10365/26345.

Full text
Abstract:
Due to the energy crisis and environmental pollution, renewable sources are more and more important. Power electronics technology is widely applied in these emerging applications and its function is to make the power conversion. The efficiency of power converters is very important and also the size of power converters is more and more concerned. Therefore, high efficiency and high power density with little power loss and light weight are a trend for power converters. In this research work, light-emitting diode (LED) drivers are first investigated and advanced concaved current control is applied in AC-DC linear LED drivers, which can achieve high power density and high efficiency for indoor applications. Also, high-power-density single-phase DC-AC inverter with power decoupling function is a very hot topic in Photovoltaic (PV) applications. The research proposed an in-series and in-parallel power decoupling method to minimize the passive dc-link capacitance. Furthermore, an instantaneous pulse power compensator (IPPC) is proposed. When compared with the existing methods, it can achieve higher system power density. Besides, grid-tied controller is designed and tested. What?s more, three-phase inverter is investigated for the segmented motor in electric vehicle (EV) and hybrid electric vehicle (HEV) applications. Interleaved control methods are applied with different control schemes. High-power-density and high-efficiency three-phase inverter systems are compared. Finally, DC-DC switched-tank resonant converter is studied for 48V data center application. The proposed converter can achieve ultra-high efficiency and high power density. The planar inductor is designed and simulated with Maxwell software. The prototype is made and tested.
APA, Harvard, Vancouver, ISO, and other styles
2

Briggs, Maxwell H. "Improving Free-Piston Stirling Engine Power Density." Case Western Reserve University School of Graduate Studies / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=case1432660882.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kang, Byoungwoo. "Designing materials for energy storage with high power and energy density : LiFePO₄ cathode material." Thesis, Massachusetts Institute of Technology, 2009. http://hdl.handle.net/1721.1/59707.

Full text
Abstract:
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, February 2010.
"February 2010." Cataloged from PDF version of thesis.
Includes bibliographical references.
LiFePO₄ has drawn a lot of attention as a cathode material in lithium rechargeable batteries because its structural and thermal stability, its inexpensive cost, and environmental friendliness meet the requirements of power sources for electric vehicles, except high power capability. Strategies to increase the rather sluggish rate performance of bulk LiFePO₄ have focused on improving electron transport in the bulk or at the surface of the material, or on reducing the path length over which the electron and Li* have to move by using nano-sized materials. However, recent evidence indicates LiFePO₄ is pure one dimensional lithium conductor. So, lithium transport is as important as electron transport. Strong anisotropic lithium diffusion results in limited transports of lithium ions in both the bulk and the surface. Reducing the particle size improves the transport of lithium ions in the bulk, and modification of the surface with a lithium-ion conducting material should enhance the transport of lithium ions on the surface. A poorly crystallized lithium phosphate phase on the surface of nanoscale LiFePO₄ is created by using proper off-stoichiometry (LiFeo.9Po.9504.3). The off-stoichiometric strategy leads to small particles less than 50 nm through grain growth restriction and a poorly crystallized lithium phosphate on the surface. The conducting surface phase can not only improve the transport of lithium ions on the surface but also facilitate the access of lithium ions to the surface by reducing anisotropic lithium diffusion on the surface induced by its amorphous nature. The off-stoichiometric material shows extremely high rate performance, achieving reasonable capacity even at 400C (9 s charge/discharge). In this thesis, the main finding is as follows: LiFePO₄ shows fast bulk kinetics and in itself does not limit the rate of charge and discharge. When bulk Li transport is very fast, the battery charging and discharging are limited by other factors such as the surface adsorption and surface transfer of lithium ions and the configuration of a cell. The off-stoichiometric strategy to improve surface transports addresses the right rate-limiting step and reveals the real capability of LiFePO₄.
by Byoungwoo Kang.
Ph.D.
APA, Harvard, Vancouver, ISO, and other styles
4

Armutlulu, Andac. "Deterministically engineered, high power density energy storage devices enabled by MEMS technologies." Diss., Georgia Institute of Technology, 2014. http://hdl.handle.net/1853/54270.

Full text
Abstract:
This study focuses on the design, fabrication, and characterization of deterministically engineered, three-dimensional architectures to be used as high-performance electrodes in energy storage applications. These high-surface-area architectures are created by the robotically-assisted sequential electrodeposition of structural and sacrificial layers in an alternating fashion, followed by the removal of the sacrificial layers. The primary goal of this study is the incorporation of these highly laminated architectures into the battery electrodes to improve their power density without compromising their energy density. MEMS technologies, as well as electrochemical techniques, are utilized for the realization of these high-power electrodes with precisely controlled characteristic dimensions. Diffusion-limited models are adopted for the determination of the optimum characteristic dimensions of the electrodes, including the surface area, the thickness of the active material film, and the distance between the adjacent layers of the multilayer structure. The contribution of the resultant structures to the power performance is first demonstrated by a proof-of-concept Zn-air microbattery which is based on a multilayer Ni backbone coated with a conformal Zn film serving as the anode. This primary battery system demonstrates superior performance to its thin-film counterpart in terms of the energy density at high discharge rates. Another demonstration involves secondary battery chemistries, including Ni(OH)2 and Li-ion systems, both of which exhibit significant cycling stability and remarkable power capability by delivering more than 50% of their capacities after ultra-fast charge rates of 60 C. Areal capacities as high as 5.1 mAh cm-2 are reported. This multilayer fabrication approach is also proven successful for realizing high-performance electrochemical capacitors. Ni(OH)2-based electrochemical capacitors feature a relatively high areal capacitance of 1319 mF cm-2 and an outstanding cycling stability with a 94% capacity retention after more than 1000 cycles. The improved power performance of the electrodes is realized by the simultaneous minimization of the internal resistances encountered during the transport of the ionic and electronic species at high charge and discharge rates. The high surface area provided by the highly laminated backbone structures enables an increased number of active sites for the redox reactions. The formation of a thin and conformal active material film on this high surface area structure renders a reduced ionic diffusion and electronic conduction path length, mitigating the power-limiting effect of the active materials with low conductivities. Also, the highly conductive backbone serving as a mechanically stable and electrochemically inert current collector features minimized transport resistance for the electrons. Finally, the highly scalable nature of the multilayer structures enables the realization of high-performance electrodes for a wide range of applications from autonomous microsystems to macroscale portable electronic devices.
APA, Harvard, Vancouver, ISO, and other styles
5

Nutter, David B. "Sound Absorption and Sound Power Measurements in Reverberation Chambers Using Energy Density Methods." Diss., CLICK HERE for online access, 2006. http://contentdm.lib.byu.edu/ETD/image/etd1546.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Patankar, Siddharth. "High-power laser systems for driving and probing high energy density physics experiments." Thesis, Imperial College London, 2013. http://hdl.handle.net/10044/1/23893.

Full text
Abstract:
This thesis describes the construction of a hybrid OPCPA and Nd:Glass based laser system to provide advanced diagnostic capabilities for the MAGPIE pulsed power facility at Imperial College London. The laser system (named Cerberus) is designed to provide one short pulse 500 fs beam for proton probing and two long pulse beams, one for x-ray backlighting and one for Thomson scattering. The aim of this project is to accurately determine plasma parameters in a range of demanding experimental environments. The thesis is split into two sections; the first section provides details about the design and implementation of the laser system while the latter chapters present experimental data obtained on the MAGPIE facilty. The front end for the laser system is based on optically synchronised Optical Parametric Chirped Puled Amplification (OPCPA) which is supplemented by large aperture flashlamp pumped Nd:Glass power amplifiers in the latter stages to increase the energy to the Joule level. The use of optical parametric amplifiers (OPAs) in the pre-amplifier stages reduces gain narrowing, B-integral and improves contrast. Simulations of the dispersive optics for the Chirped Pulse Amplification (CPA) system are described in detail. Spatially resolved Thomson scattering was used to measure temperature and velocity of ablation streams in aluminium and tungsten cylindrical wire arrays. The measurements show a peak ow velocity of 120 km/s and agree well with 3D MHD simulations for the case of aluminium. There is discrepancy with the tungsten data caused by the difficulty in handling of collisionality calculations. Novel data showing the self-emission of ions from tungsten radial wire arrays is presented as a key step towards laser driven proton probing of MAGPIE. It is observed that the bulk of the emission corresponds to low energy protons with energies of ~ 100 keV. Protons with energy > 600 keV were observed to emanate from the collapsing magnetic jet using a coded aperture camera. These results offer interesting new prospects in diagnosing wire arrays.
APA, Harvard, Vancouver, ISO, and other styles
7

Dinca, Dragos. "Development of an Integrated High Energy Density Capture and Storage System for Ultrafast Supply/Extended Energy Consumption Applications." Cleveland State University / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=csu1495115874616384.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Adamson, Jesse Timothy. "Pulse Density Modulated Soft Switching Cycloconverter." DigitalCommons@CalPoly, 2010. https://digitalcommons.calpoly.edu/theses/315.

Full text
Abstract:
Single stage cycloconverters generally incorporate hard switching at turn on and soft switching at turn off. This hard switching at turn on combined with the slow switching speeds of thyristors (the switch of choice for standard cycloconverters) limits their use to lower frequency applications. This thesis explores the analysis and design of a pulse density modulated (PDM), soft switching cycloconverter. Unlike standard cycloconverters, the controller in this converter does not adjust thyristor firing angles. It lets only complete half cycles of the input waveform through to the output. This allows and requires a much greater frequency step down from the input to the output. The advantages, shortcomings and tradeoffs of this topology are explored as this converter is designed, built and tested. The resulting cycloconverter has many deficiencies, but proves the concept of the PDM soft switching technique. Cases for further improvement and study are outlined. In the end, this converter shows much promise for applications requiring a high step down in frequency, as well as where the lower electromagnetic interference (EMI) of soft switching may be beneficial.
APA, Harvard, Vancouver, ISO, and other styles
9

Amin, Mahmoud. "Efficiency and Power Density Improvement of Grid-Connected Hybrid Renewable Energy Systems utilizing High Frequency-Based Power Converters." FIU Digital Commons, 2012. http://digitalcommons.fiu.edu/etd/600.

Full text
Abstract:
High efficiency of power converters placed between renewable energy sources and the utility grid is required to maximize the utilization of these sources. Power quality is another aspect that requires large passive elements (inductors, capacitors) to be placed between these sources and the grid. The main objective is to develop higher-level high frequency-based power converter system (HFPCS) that optimizes the use of hybrid renewable power injected into the power grid. The HFPCS provides high efficiency, reduced size of passive components, higher levels of power density realization, lower harmonic distortion, higher reliability, and lower cost. The dynamic modeling for each part in this system is developed, simulated and tested. The steady-state performance of the grid-connected hybrid power system with battery storage is analyzed. Various types of simulations were performed and a number of algorithms were developed and tested to verify the effectiveness of the power conversion topologies. A modified hysteresis-control strategy for the rectifier and the battery charging/discharging system was developed and implemented. A voltage oriented control (VOC) scheme was developed to control the energy injected into the grid. The developed HFPCS was compared experimentally with other currently available power converters. The developed HFPCS was employed inside a microgrid system infrastructure, connecting it to the power grid to verify its power transfer capabilities and grid connectivity. Grid connectivity tests verified these power transfer capabilities of the developed converter in addition to its ability of serving the load in a shared manner. In order to investigate the performance of the developed system, an experimental setup for the HF-based hybrid generation system was constructed. We designed a board containing a digital signal processor chip on which the developed control system was embedded. The board was fabricated and experimentally tested. The system’s high precision requirements were verified. Each component of the system was built and tested separately, and then the whole system was connected and tested. The simulation and experimental results confirm the effectiveness of the developed converter system for grid-connected hybrid renewable energy systems as well as for hybrid electric vehicles and other industrial applications.
APA, Harvard, Vancouver, ISO, and other styles
10

Signorelli, Riccardo (Riccardo Laurea). "High energy and power density nanotube-enhanced ultracapacitor design, modeling, testing, and predicted performance." Thesis, Massachusetts Institute of Technology, 2009. http://hdl.handle.net/1721.1/63027.

Full text
Abstract:
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2009.
Cataloged from PDF version of thesis.
Includes bibliographical references (p. 161-164).
Today's batteries are penalized by their poor cycleability (limited to few thousand cycles), shelf life, and inability to quickly recharge (limited to tens of minutes). Commercial ultracapacitors are energy storage systems that solve these problems by offering more than one million recharges with little capacitance degradation, recharge times on the order of few seconds, and unlimited shelf life. However, today's ultracapacitors are limited by their low energy stored per unit of volume and weight (5% that of a lithium ion battery), and their high cost (ten times greater than that of lithium ion batteries) per unit of energy stored. This thesis presents vertical carbon nanotubes-based electrodes designed to achieve, when packaged into an ultracapacitor cell, a four to seven times higher power density (7.8 kW/1) and a five times higher energy density (31 Wh/1) than those of activated carbon-based ultracapacitors. Models to predict the energy density, power density, and efficiency of an ultracapacitor cell using vertical carbon nanotube electrodes of a given morphology are described. The synthesis of carbon nanotube electrodes fabricated on thin conducting substrates of tungsten and aluminum that have the target nanotube average diameters and lengths is described along with insights on the thermodynamics of the nanotube growth reaction. The low pressure chemical vapor deposition reactor used to fabricate nanotube electrodes on conducting substrates is described. Electrochemical measurements of electrodes are presented to corroborate electrochemical modeling leading to the performance prediction of carbon nanotube-based ultracapacitors. Finally, some key remaining questions to further advance the understanding of nanotubes as electrode materials for ultracapacitor are presented.
by Riccardo Signorelli.
Ph.D.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Energy and power density"

1

K, Abe David, and Nusinovich G. S, eds. High energy density and high power RF: 7th Workshop on High Energy Density and High Power RF, Kalamata, Greece, 13-17 June 2005. Melville, N.Y: American Institute of Physics, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

H, Gold Steven, Nusinovich G. S, University of Maryland (College Park, Md.), Naval Research Laboratory (U.S.), and United States. Dept. of Energy., eds. High energy density and high power RF: 6th Workshop on High Energy Density and High Power RF, Berkeley Springs, West Virginia, 22-26 June 2003. Melville, N.Y: American Institute of Physics, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Drake, R. Paul. High-Energy-Density Physics. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-67711-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Klapötke, T. M., ed. High Energy Density Materials. Berlin, Heidelberg: Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-72202-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

M, Klapötke Thomas, ed. High energy density materials. Berlin: Springer Verlag, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Commerce, Ceylon Chamber of, and Deutsche Gesellschaft für Technische Zusammenarbeit (Colombo, Sri Lanka), eds. Power & energy. Colombo: Ceylon Chamber of Commerce, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hinrichs, Roger. Energy. Philadelphia: Saunders College Pub., 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Lebedev, Sergey V., ed. High Energy Density Laboratory Astrophysics. Dordrecht: Springer Netherlands, 2007. http://dx.doi.org/10.1007/978-1-4020-6055-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kyrala, G. A., ed. High Energy Density Laboratory Astrophysics. Dordrecht: Springer Netherlands, 2005. http://dx.doi.org/10.1007/1-4020-4162-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kyrala, George A. High energy density laboratory astrophysics. Dordrecht: Springer, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Energy and power density"

1

Drake, R. Paul. "Magnetized Flows and Pulsed-Power Devices." In High-Energy-Density Physics, 435–81. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-67711-8_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Conway, B. E. "Energy Density and Power Density of Electrical Energy Storage Devices." In Electrochemical Supercapacitors, 417–77. Boston, MA: Springer US, 1999. http://dx.doi.org/10.1007/978-1-4757-3058-6_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Zhou, Kaile, and Lulu Wen. "Power Demand and Probability Density Forecasting Based on Deep Learning." In Smart Energy Management, 101–34. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-9360-1_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Fortov, Vladimir E. "High-Power Lasers in High-Energy-Density Physics." In Extreme States of Matter, 75–96. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-16464-4_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Fortov, Vladimir E. "High-Power Lasers in High-Energy-Density Physics." In Extreme States of Matter, 167–275. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-18953-6_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Barik, M. A., H. R. Pota, and J. Ravishankar. "Power Management of Low and Medium Voltage Networks with High Density of Renewable Generation." In Renewable Energy Integration, 189–208. Singapore: Springer Singapore, 2014. http://dx.doi.org/10.1007/978-981-4585-27-9_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Nkounga, W. M., M. F. Ndiaye, and M. L. Ndiaye. "Management of Intermittent Solar and Wind Energy Resources: Storage and Grid Stabilization." In Sustainable Energy Access for Communities, 109–18. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-68410-5_10.

Full text
Abstract:
AbstractThe chapter documents options for management of the intermittency of solar and wind energy resources, with the aim of supporting transition to energy sustainability with these resources. It explores different techniques for creating storage in high power and high energy systems. We review indicators to support the decision on the selection of these storage options combined or not to grid management strategies. Our results show that flywheel is more appropriate in short-term high power storage given its low investment cost and its power density per cubic metre. For long-term energy storage, still considering the investment cost and power density per cubic metre, hydrogen, and hydraulic pumping are the best options. The smart management of storage options can significantly reduce the impact of solar and wind resources intermittency on the stability of the grid.
APA, Harvard, Vancouver, ISO, and other styles
8

Prelas, Mark, Matthew Boraas, Fernando De La Torre Aguilar, John-David Seelig, Modeste Tchakoua Tchouaso, and Denis Wisniewski. "Power Density Dilution Due to the Interface of the Isotope with the Transducer." In Lecture Notes in Energy, 177–220. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-41724-0_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bockris, J. O’ M., and M. Gauthier. "Cyclability of Polymer Electrolyte Cells. Power Efficiency and Energy Density." In Conducting Polymers, 209–10. Dordrecht: Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3907-3_21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Abdi, H., N. Ait Messaoudene, and M. W. Naceur. "Compromise Between Power Density and Durability of a PEM Fuel Cell Operating Under Flood Conditions." In Springer Proceedings in Energy, 247–53. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-6595-3_32.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Energy and power density"

1

Caryotakis, George, Glenn Scheitrum, Erik Jongewaard, Arnold Vlieks, Randy Fowkes, Song Liqun, and Jeff Li. "High power W-band klystrons." In High energy density microwaves. AIP, 1999. http://dx.doi.org/10.1063/1.59033.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

James, Bill G. "High power broadband millimeter wave TWTs." In High energy density microwaves. AIP, 1999. http://dx.doi.org/10.1063/1.59038.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Nezhevenko, O. A., V. P. Yakovlev, A. K. Ganguly, and J. L. Hirshfield. "High power pulsed magnicon at 34-GHz." In High energy density microwaves. AIP, 1999. http://dx.doi.org/10.1063/1.59011.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Abubakirov, E. B., A. N. Denisenko, M. I. Fuchs, N. G. Kolganov, N. F. Kovalev, M. I. Petelin, A. V. Savelyev, E. I. Soluyanov, V. V. Yastrebov, and D. Flechtner. "X-band amplifier of gigawatt pulse power." In High energy density microwaves. AIP, 1999. http://dx.doi.org/10.1063/1.59024.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Pritzkau, David P., Gordon B. Bowden, Al Menegat, and Robert H. Siemann. "Possible high power limitations from RF pulsed heating." In High energy density microwaves. AIP, 1999. http://dx.doi.org/10.1063/1.59027.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Blank, M., M. Garven, J. P. Calame, J. J. Choi, B. G. Danly, B. Levush, K. Nguyen, and D. E. Pershing. "Experimental demonstration of high power millimeter wave gyro-amplifiers." In High energy density microwaves. AIP, 1999. http://dx.doi.org/10.1063/1.59007.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

McDermott, D. B., A. T. Lin, Y. Hirata, S. B. Harriet, Q. S. Wang, and N. C. Luhmann. "High power harmonic gyro-TWT amplifiers in mode-selective circuits." In High energy density microwaves. AIP, 1999. http://dx.doi.org/10.1063/1.59035.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Fowkes, W. R., R. S. Callin, E. N. Jongewaard, D. W. Sprehn, S. G. Tantawi, and A. E. Vlieks. "Recent advances in high power rf windows at X-band." In High energy density microwaves. AIP, 1999. http://dx.doi.org/10.1063/1.59019.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Fazio, Michael V., and G. Andrew Erickson. "Advanced concepts for high power RF generation using solid state materials." In High energy density microwaves. AIP, 1999. http://dx.doi.org/10.1063/1.59018.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Perevodchikov, V. I. "Power wideband amplifiers and generators on the basis of plasma TWT." In High energy density microwaves. AIP, 1999. http://dx.doi.org/10.1063/1.59026.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Energy and power density"

1

Wu, Richard L., and Kevin R. Bray. High Energy Density Dielectrics for Pulsed Power Applications. Fort Belvoir, VA: Defense Technical Information Center, September 2008. http://dx.doi.org/10.21236/ada494790.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Zimmerman, Albert H., and D. M. Speckman. High Energy Density Rechargeable Batteries for Aerospace Power Requirements. Fort Belvoir, VA: Defense Technical Information Center, August 1987. http://dx.doi.org/10.21236/ada184883.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Professor Bruce R. Kusse and Professor David A. Hammer. CENTER FOR PULSED POWER DRIVEN HIGH ENERGY DENSITY PLASMA STUDIES. Office of Scientific and Technical Information (OSTI), April 2007. http://dx.doi.org/10.2172/903295.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

O'Connor, K. A., and R. D. Curry. Dielectric Studies in the Development of High Energy Density Pulsed Power Capacitors. Fort Belvoir, VA: Defense Technical Information Center, June 2013. http://dx.doi.org/10.21236/ada587450.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Barbee, T. W. Jr, and G. W. Johnson. High energy density capacitors for power electronic applications using nano-structure multilayer technology. Office of Scientific and Technical Information (OSTI), September 1995. http://dx.doi.org/10.2172/258017.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Scoles, G., and K. K. Lehmann. Broadly Tunable, High Average Power, Narrow Bandwidth Laser System for Characterization of High Energy Density Materials. Fort Belvoir, VA: Defense Technical Information Center, February 2002. http://dx.doi.org/10.21236/ada400100.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Luhmann, Jr, N. C. Publications of Proceedings for the RF 2005 7th Workshop on High Energy Density and High Power RF. Office of Scientific and Technical Information (OSTI), January 2006. http://dx.doi.org/10.2172/925696.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Victor L. Granatstein. Publication of Proceedings for the 6th Workshop on High Energy Density and High Power RF (RF 2003). Office of Scientific and Technical Information (OSTI), August 2004. http://dx.doi.org/10.2172/850248.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Zhang, Qiming. Ferroelectric Polymers with Ultrahigh Energy Density, Low Loss, and Broad Operation Temperature for Navy Pulse Power Capacitors. Fort Belvoir, VA: Defense Technical Information Center, February 2014. http://dx.doi.org/10.21236/ada622919.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

zur Loye, Hans-Conrad, and Harry J. Ploehn. Polymer Nanocomposites As Future Materials For Defense & Energy Applications-High Energy Density Storage Systems With Reduced Size And Weight For Pulse Power Applications. Fort Belvoir, VA: Defense Technical Information Center, November 2011. http://dx.doi.org/10.21236/ada557747.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Energy and power density' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography