Relevant bibliographies by topics / EMS / Dissertations / Theses

Dissertations / Theses on the topic 'EMS'

To see the other types of publications on this topic, follow the link: EMS.
Author: Grafiati
Published: 4 June 2021
Last updated: 8 September 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'EMS.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Straková, Edita. "Využití norem ISO v konkrétním podniku." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2008. http://www.nusl.cz/ntk/nusl-264889.

Full text
Abstract:
The thesis deals about usage standard of CSN EN ISO 14001:2005 and it implementation to the company. In the theoretical part is analyzed process of the implementation and behaviour standard CSN EN ISO 14001:2005 in the building company XYZ. The attention is mainly drawn to benefits and costs connected with the implementation. Reccomendations for system functioning EMS are presented as a conclusion.
APA, Harvard, Vancouver, ISO, and other styles
2

Fedorčáková, Tatiana. "Možnosti zlepšování systému environmentálního managementu ve společnosti ČSA, a.s." Master's thesis, Vysoká škola ekonomická v Praze, 2008. http://www.nusl.cz/ntk/nusl-9207.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Heger, Martin. "EMS ve výrobním podniku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228201.

Full text
Abstract:
This work considers with environmental aspects and impacts of manufacture in SLB spol. s r.o. (spol. s r.o. means Ltd) company. Output of this work can be used for starting environmental management system in this company. It contains abstract of base legal demands which refers to SLB spol. s r.o. and short declaration of their fulfilling. In the end of the work there are drafts to antipollution measures.
APA, Harvard, Vancouver, ISO, and other styles
4

Kacálek, Petr. "Návrh a budování environmentálního managementu." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2008. http://www.nusl.cz/ntk/nusl-221946.

Full text
Abstract:
The goal of the submitted thesis “The Suggestion and the Construction Environmental Management” is to analyze significance of environmental management system, description of tools of EMS implementation and introduction style in firm TTK CZ s. r. o.. The first part is concentrated on environmental policy concerning the business sphere. In the second part there is a general description of implementation tools of EMS, significance of EMS implementation and benefits of system. In the final part I characterize the firm TTK CZ s. r. o. which displays growing interest in achievement and demonstration of good environmental profile by management of operation impacts, products and services to environment in compliance with environmental policy.
APA, Harvard, Vancouver, ISO, and other styles
5

Hynková, Alice. "Management podniku a životní prostředí." Master's thesis, Vysoká škola ekonomická v Praze, 2008. http://www.nusl.cz/ntk/nusl-10182.

Full text
Abstract:
This diploma thesis is focused on the environmental management system (EMS). The company can benefit from this system, eg. competition advantage and image increase. The aim of my work is to describe and evaluate two systems of environmental management in Logica CEE company - one is already set up in the Czech Republic and the second one is being established in Slovakia recently. I would like to determine the benefits and impacts of these systems. In practical part of the diploma thesis I describe the complex system implementation and its certification and re-certification.
APA, Harvard, Vancouver, ISO, and other styles
6

Ringan, Neil S. "New reactions of ceph-3-ems." Thesis, University of Abertay Dundee, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.329125.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Torrance, Jacqueline. "Novel reactions of ceph-3-ems." Thesis, Abertay University, 1995. https://rke.abertay.ac.uk/en/studentTheses/4c9a614b-0619-42af-869f-bad5a5ae915f.

Full text
Abstract:
Michael additions and reactions with haloalkanes have demonstrated the synthetic usefulness of the C-2 and C-4 anions in ceph-3-em sulphides and sulphoxides for the formation of a range of novel compounds (A-H). Other compounds prepared from similiar reactions include (I-O). A reverse Michael addition was attempted on the C-4 mono-adducts (M) and (N) and di-adducts (L) and (O). Determination of the configuration of the di-adducts (F) and (I) was accomplished by de-esterification followed by decarboxylation and resulted in the novel ceph-3-em (P). Conversion of (J) and (K) into novel ceph-3-ems (Q) and (R) bearing C-2 exocyclic bond systems via a Pummerer rearrangement is described. Attempts at a Pummerer rearrangement of (D) and (E) failed. Numerous attempts at a Cope rearrangement on ceph-2-em sulphoxide (G) and sulphide (H) failed. De-esterification reactions of the new ceph-3-ems to their corresponding acids were unsuccessful.
APA, Harvard, Vancouver, ISO, and other styles
8

Diemond, Josephine Maria Iacuzzo. "East Menlow School (EMS) Alumni and Faculty Speak Out about Secondary and Postsecondary Experiences of EMS Students." Thesis, University of Pennsylvania, 2018. http://pqdtopen.proquest.com/#viewpdf?dispub=10639024.

Full text
Abstract:

A K-12 education should prepare students for their transition to postsecondary life, regardless of the nature of such a future. This study aims to explore the secondary and postsecondary experiences of alumni from East Menlow School (EMS), a co-educational, K-12, college-prep, independent day school on the east coast of the United States. By surveying and interviewing faculty and alumni, this mixed-methods study seeks to identify which student and teacher characteristics or practices, curricular and pedagogical practices, and school and family supports contribute to the high school completion and persistence through at least the first year of their postsecondary institution of EMS students in general and EMS students with learning differences (LD) in particular. A young adult’s persistence to college graduation is multi-dimensional. Learning differences add an extra layer of academic and non-academic difficulty. As a result, it is vital that educators understand the needs of their LD students.

While the perspectives of EMS alumni in general, both non-LD and LD, are analyzed, this study further seeks to compare and contrast the experiences of EMS alumni with dyslexia, also known as a reading disability or reading disorder, with their non-LD and other LD peers. For many students, the ability to read and to write is the foundation of college success. Since the juried literature is scant in independent schools, this study attempts to provide a foundation for other research on LD students in independent schools.

APA, Harvard, Vancouver, ISO, and other styles
9

Wiedermannová, Pavla. "Zjištění přínosů zavedení systému environmentálního managementu v konkrétních organizacích." Master's thesis, Vysoká škola ekonomická v Praze, 2008. http://www.nusl.cz/ntk/nusl-10589.

Full text
Abstract:
The main goal of the diploma thesis is to specify the main benefits of the implementation of the Enviromental Management System and to find out other information about the already implemented EMS. The thesis is divided into two parts - theoretical and practical. In the theoretical part is clarified the term Environmental Management System, its history and standards for the EMS. In the practical part the questionary is presented as the method of the obtaining data from the concrete organisations. At the same time the answers of the respondents are analysed. The end of the thesis also includes the comparison of the study with the analoguous studies from the past.
APA, Harvard, Vancouver, ISO, and other styles
10

Knoops, Lorinde, and Tilda Lundgren. "Modeling ambulance dispatching rules for EMS-systems." Thesis, KTH, Optimeringslära och systemteori, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-189023.

Full text
Abstract:
This thesis presents a study on efficient dispatching rules in ambulance dispatching. By efficient dispatching rules, we mean such dispatching rules that lower response times for priority 1 calls while keeping response times for priority 2 calls at an adequate level. A Markov process and a simulation model were developed in order to evaluate the performance of several existing and newly designed dispatching rules. On four different response areas, five different dispatching rules were tested and their performances were compared. Particular focus was put upon the dispatch rule currently used by the Swedish emergency service provider SOS Alarm; the Closest rule. Our findings indicate that the four priority-based dispatching rules all outperform the Closest rule in decreasing the mean response time for calls of priority degree 1. Furthermore, implementing restrictions on the travel time for priority 2 calls was proven an efficient way to control the trade-off between the mean response time of priority 1 and 2 calls. The conclusion was drawn that the possibilities for more efficient ambulance dispatching are many and that SOS Alarm should consider implementing priority-based dispatching rules, alike the ones presented in this thesis, in their dispatching process. A study of the ambulance operator and controller profession, and the operator’s and controller’s interplay with the decision support system used by SOS Alarm in the ambulance dispatching process, was conducted in parallel. The properties of the interaction dynamics between operator and automation and the dangers linked to it were mapped out, described and analyzed.
Denna kandidatexamensuppsats behandlar effektiva dirigeringsstrategier inom ambulansdirigering. Effektiva dirigeringsstrategier åsyftar dirigeringsstrategier som lyckas sänka svarstiden för inkommande prioritet 1-samtal, samtidigt som svarstiden för prioritet 2-samtal hålls på en tillfredsställande nivå. I syfte att utvärdera olika dirigeringsstrategier utvecklades både en Markovsk modell och en simuleringsmodell. På fyra olika geografiska områden testades och jämfördes. Fem olika dirigeringsstrategier, varav två existerande och tre nyutvecklade. Särskilt fokus riktades mot Closest rule, vilket är den dirigeringsstrategi som används i SOS Alarms verksamhet idag. Från resultaten kunde utläsas att de prioritets-baserade dirigeringsstrategierna resulterade i en lägre genomsnittlig svarstid för prioritet 1-fall än Closest rule. Dessutom konstaterades det att en begränsning av svarstiderna för prioritet 2-samtal var ett effektivt sätt att kontrollera balansen mellan de genomsnittliga svarstiderna för samtal av prioritet 1, respektive 2. Slutsatsen drogs att möjligheterna för att utveckla nya effektiva dirigeringsstrategier är många och att SOS Alarm bör överväga att implementera prioritetsbaserade dirigeringsstrategier likt dem som presenterats i denna uppsats. Parallellt studerades ambulansoperatörens och -dirigentens yrkeskunnande, samt operatörens och dirigentens samspel med det beslutsstödssystem som används i SOS Alarms dirigeringsverksamhet. Interaktionen mellan operatör och automatisering samt de relaterade riskerna kartlades, beskrevs och analyserades.
APA, Harvard, Vancouver, ISO, and other styles
11

Fan, Jerry, and Zhouije Fang. "Elektroniskt matbeställningssystem (EMS) : Androidapplikation för matbeställning i restauranger." Thesis, KTH, Skolan för informations- och kommunikationsteknik (ICT), 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-147680.

Full text
Abstract:
Syftet med denna rapport/exjobb var att utveckla ett elektroniskt matbeställningssystem (EMS) som tillåter både kunder och restauranger att hantera matbeställningar med hjälp av elektroniska apparater (smarttelefoner, surfplattor). Anledningen till varför vi utvecklade ett EMS är p.g.a att folk i allmänhet hellre väljer att äta vid snabbmatsrestauranger istället för vid traditionella restauranger under lunchtid. Väntetiden är för lång inom traditionella restauranger idag, och tiden räcker inte till för att både vänta en längre tid på sin mat samt hinna äta den under lunchtid. Detta system erbjuder ett sätt att minska väntetider när kunder besöker restauranger. Systemet skapar även ett mer effektivt och modernt arbetssätt för restaurangpersonalen vilket till stor del förenklar deras arbete. Systemet består av fyra Androidapplikationer och en databas som lagrar data för restaurangmenyer. Genom att köra simuleringar med AnyLogic och utföra en applikationstestning i en vald restaurang, har vi fått önskat resultat, vilket visar att väntetiden minskar om man börjar använda vårt system. Väntetiden minskar med i genomsnitt 3 minuter. De utvecklade applikationerna i detta arbeta är inte slutprodukter. Det finns funktionaliteter i systemet som inte än har implementerats, som t.ex. mobilbetalningssystem, bordsbokning m.fl. Alla dessa saknade funktioner tillsammans med fler produkttestning förväntas ske i framtiden.
APA, Harvard, Vancouver, ISO, and other styles
12

Miller, Allan J. "Supervisory and leadership roles of EMS Unit Chiefs." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/MQ59510.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
13

Rademacher, Michael. "Die Kreisleiter der NSDAP im Gau Weser-Ems /." Marburg : Tectum-Verl, 2005. http://deposit.ddb.de/cgi-bin/dokserv?id=2669910&prov=M&dok_var=1&dok_ext=htm.

Full text
APA, Harvard, Vancouver, ISO, and other styles
14

Madonia, Giuseppina. "The monetary linkages between Italy and the EMS." Thesis, University of Southampton, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.315886.

Full text
APA, Harvard, Vancouver, ISO, and other styles
15

Cox, Brian James. "EMS Mutagenesis in Quinoa: Developing a Genetic Resource." BYU ScholarsArchive, 2020. https://scholarsarchive.byu.edu/etd/9080.

Full text
Abstract:
Chenopodium quinoa, a South American pseudocereal, has valuable agricultural traits such as salt tolerance and drought tolerance, and it has beneficial nutritional properties such as high protein content and a complete amino acid profile. However, problems including disease susceptibility, low harvest index, lodging, seed shattering, low heat tolerance, and saponin content plague quinoa. Genetic resources for quinoa are needed to fix these problems and make quinoa more available throughout the world. We used ethyl methanesulfonate (EMS) to create a mutant population of QQ74 quinoa (USDA GRIN PI 614886) of 5,030 mutant families. We did whole exome sequencing (WES) on 44 mutant families. Using the recently published quinoa reference genome and MAPS, a mutation detection pipeline, we found a mutation rate of 11.35 mutations/Mb in these families. We also used whole genome sequencing (WGS) to calculate a mutation rate of 21.67 mutations/Mb in an additional nine mutant families. To demonstrate the utility of this population as a genetic resource, we found an EMS-induced nonsense mutation in the betalain synthesis pathway that prevents red betacyanins from accumulating in the hypocotyl of quinoa. With the mutation rates in our population, we calculate that analysis of 300 mutant families will yield 3-7 mutations in any gene of interest, which will facilitate forward and reverse genetic studies in quinoa.
APA, Harvard, Vancouver, ISO, and other styles
16

Kejduš, Petr. "Využití norem ISO v konkrétním podniku." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2008. http://www.nusl.cz/ntk/nusl-221741.

Full text
Abstract:
The goal of this thesis is consumption of ISO norms within OK Mont Inc. company, specifically the EMS as one of the optional activities of an organization to the environmental protection. The theoretical part defines and compares approaches to the implementation of the EMS – the norm of ISO 14001 and the EMAS program. The practical part describes the implementation process and the EMS functioning within the company. The attention is mainly drawn to reasons, draft, costs and benefits connected with the implementation and the maintenance of the system.
APA, Harvard, Vancouver, ISO, and other styles
17

Fogl, David. "Význam a dopady zavádění EMS u velkých průmyslových podniků." Master's thesis, Vysoká škola ekonomická v Praze, 2008. http://www.nusl.cz/ntk/nusl-10881.

Full text
Abstract:
The teoretic part of the document is about sustainable development, its reasons and history, about instruments of measuration and achievement. Next there is described the Environmental Management System, its extensiveness, requirements, benefits for company and the standards of EMS. In the document are described the differences between certification according to ISO 14000 or EMAS. Costs according to the etaps and posibility to financial subventions are analyzed in this document too. The next part is research-based tail, based on list of question to Czech companies, in which EMS is implemented. The research was pointed to prove the declared benefits for companies, experiences with EMS and general attitude of companies to this issue. In the end of the document there are comments, results of research and knowledge, which was observed during the research.
APA, Harvard, Vancouver, ISO, and other styles
18

Parrish, Ashley. "PEDIATRIC PAIN ASSESSMENT PRACTICES AND PREFERENCES OF EMS PROVIDERS." Thesis, The University of Arizona, 2015. http://hdl.handle.net/10150/535399.

Full text
Abstract:
A Thesis submitted to The University of Arizona College of Medicine - Phoenix in partial fulfillment of the requirements for the Degree of Doctor of Medicine.
Background: Pain scales developed for children were noted not to be useful or practical in an ambulance, and EMS providers have been found to use non‐standardized measures of pain severity in children. A recently published evidence‐based guideline recommends using pictorial scales (PS) for patients aged 4‐12 years, and observational‐behavioral scales (OBS) for younger patients. Objectives were to assess EMS providers’ baseline knowledge, self‐reported practices, self‐efficacy for treating pain in children, and preference for pediatric pain scales. Methods: A survey and education module were administered to a convenience sample of EMS providers from four agencies within a large metropolitan area. Providers answered 20 Likert scale items, received a 15‐minute didactic on pain assessment in children, and then answered four additional survey items. Results: There were 397 surveys returned (80% of providers receiving didactic). Six‐tenths of providers had practiced >10 years, 99% were EMT‐P, and 91% were male. 88% reported feeling “Very‐Extremely” comfortable measuring pain severity in adults; 38% reported the same in children. 57% reported having been trained on the use of pain scales in children; 46% were at least “Moderately” familiar with any PS and 24% with any OBS. While 44% assessed their current practice as “Sometimes‐Always” using pediatric scales, <25% of providers reported carrying paper or electronic copies of pain scales. 75% reported using their own observation to assess pain “Most of the Time‐Always.” Self‐efficacy results for utilizing pain protocols and measuring pain scores for 8‐year and 36‐month patients revealed 68% and 48% were at least “Mostly” certain they could perform correctly. After education about pediatric pain scales, 41% and 31% reported they would be more than “Somewhat” likely to use PS or OBS, respectively. Conclusion: A sample of EMS providers reported a high level of discomfort assessing pain in children, a moderate prevalence of training, and a low familiarity with existing pediatric pain scales. Most use general impression to assess pain instead of pain scales. After education, the minority of providers reported likelihood of incorporating these tools into their practice. This is an important barrier to adoption of the evidence‐based guideline for management of acute traumatic pain.
APA, Harvard, Vancouver, ISO, and other styles
19

Lutz, Alexandra, and Van Nguyen. "Important attributes influencing B2B customer value in the EMS market." Thesis, Karlstads universitet, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-7521.

Full text
Abstract:
The thesis presents a study on important attributes which should be considered by the supplier in buying situations in the electronic manufacturing services (EMS) market. Hence, the importance level of attributes is investigated to see which attributes are more or less important when business-to-business (B2B) customers place an order. This can be interpreted as the relationship between the created value and the accompanying cost. For the success of this research work, both the qualitative and quantitative methods need to be applied. The importance of nine aspects is examined including: payment term, warranty, brand, product quality, delivery, packaging, certificates, supporting service and after-sales service. To identify which one is significant, a classification of the twenty-three attributes covering the nine aspects is conducted using Kano’s evaluation table. The findings through this research indicate that delivery, product quality and supporting service are the three most important aspects. A focus on these aspects is supposed to help the company to get value for the customers and also bring significant benefits for that company.
APA, Harvard, Vancouver, ISO, and other styles
20

Míková, Barbora. "Efektivita využití konceptu EMS v porovnání s jinými způsoby přepravy." Master's thesis, Vysoká škola ekonomická v Praze, 2015. http://www.nusl.cz/ntk/nusl-205619.

Full text
Abstract:
This thesis focuses on concept of European Modular System. It describes its characteristics, main advantages and disadvantages and experiences of other countries. A separate chapter focuses on swap bodies so that modular heavy goods vehicles can be compared to them in practical part of this thesis. Aim of this thesis is to evaluate what is better for transport of particular goods, if classical semi-trailer unit with maximum allowed length of 16,5 m, combined transport road-rail with use of swap bodies or modular heavy goods vehicle. Costs, transpotation times and emissions will be compared in this section. The thesis also aims at evaluating if main arguments of opponents of this concept are eligible or not.
APA, Harvard, Vancouver, ISO, and other styles
21

Bolsöy, Alfred, Marcus Thelin, and Nils Håkansson. "Lageromsättning i EMS-branschen : En fallstudie om kund- och leverantörsförhållanden." Thesis, Högskolan i Gävle, Industriell ekonomi, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-27905.

Full text
Abstract:
Most producing companies aim to reduce tied up capital, which is meant to increase inventory turnover. In this study, an EMS (Electronic manufacturing service) -company, a contract manufacturer, will be studied. The company does not own the products themselves, but is a service company that manufactures to customers. The business has a problem that existed for a long period of time, they have a low inventory turnover among their component inventory. The company therefore wants to increase its inventory turnover in order to reduce its tied-up capital. The aim is to develop knowledge about supplier and customer relationships that affect the stock turnover rate in component stocks. In order to make calculations, it is profitable for the company to order materials multiple times for increased inventory turnover or fewer times to keep down the order cost. Case study is based on qualitative data in the form of interviews and observations. A large part of this study is also based on quantitative data from the company's MRP (material requirements planning) system. The literature is based on articles that deals with key concepts such as EOQ (economic order quantity), customer and supplier relationships. The conclusion of this study suggests that the company should use EOQ to reduce overall order cost while reducing the tied-up capital.
APA, Harvard, Vancouver, ISO, and other styles
22

Šimák, Marek. "Úspory v materiálových tocích v návaznosti na EMS výrobních podniků." Doctoral thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2009. http://www.nusl.cz/ntk/nusl-233720.

Full text
Abstract:
The subject of this dissertation thesis is „Savings in material flows in connection with EMS in production companies“. The topic of this dissertation thesis is the saving in material flows in connection with EMS in production companies. Sound ecological management in industrial companies is important due to the fact it enhances environment protection and provides the companies concerned with competitive advantage. In many cases it provides for better organization of labor and decrease of wastage and allows for other preventive measures. The aim of this paper is to study the relation between the economical and environmental protection interests of companies operating in selected business sector, the paper examines whether environment protection activities practiced by the companies provide also economical benefit for them. The paper uses literature to analyze relations between EMS, logistics and areas in which savings can be found thus contributing to better results in the fields of environment protection and economy. The gained information together with conducted empirical research is the base used in order to determine the area in which savings could be found. Emphasis is laid on material flows which are studied in selected company active in the field of automotive industry. The analysis is based on the current organizational structure and logistic chain, the analyses focuses mainly on warehousing activities. In the studied company there is charted disconnection point which is located in the reception area in the warehouse. Narrow place was found in the dispatch area of the warehouse, the results of the analyses are the base to be used to express the amount of possible savings. Within the process evaluation, measurements and analysis of working time for each shift have been conducted, since the working load of the concerned shifts presents a risk factor from the perspective of ensuring the in time delivery of materials to the production. Proposal to improve the process is based on the synthesis of acquired facts, it allows for better utilization of working time of warehouse employees and provides extra space for manipulation with materials. When there is extra working load to be handled (extra order from customer) it also provides for the elimination of unnecessary or extra actions connected with operations. The application of the improvement proposal will abolish one of the reasons for non operation time in production, which leads to savings in energy consumption and decreases the amount of emissions. In the final part of the dissertation thesis a summary of solutions to the encountered problems is presented and the possible contribution of this thesis to theory and praxis is described.
APA, Harvard, Vancouver, ISO, and other styles
23

Caramia, Gabriele. "Development of an innovative non rule-based energy management strategy for a Hybrid Electric Vehicle, structured for predictive driving controls based on external information knowledge." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2016. http://amslaurea.unibo.it/11755/.

Full text
Abstract:
Recently, the interest of the automotive market for hybrid vehicles has increased due to the more restrictive pollutants emissions legislation and to the necessity of decreasing the fossil fuel consumption, since such solution allows a consistent improvement of the vehicle global efficiency. The term hybridization regards the energy flow in the powertrain of a vehicle: a standard vehicle has, usually, only one energy source and one energy tank; instead, a hybrid vehicle has at least two energy sources. In most cases, the prime mover is an internal combustion engine (ICE) while the auxiliary energy source can be mechanical, electrical, pneumatic or hydraulic. It is expected from the control unit of a hybrid vehicle the use of the ICE in high efficiency working zones and to shut it down when it is more convenient, while using the EMG at partial loads and as a fast torque response during transients. However, the battery state of charge may represent a limitation for such a strategy. That’s the reason why, in most cases, energy management strategies are based on the State Of Charge, or SOC, control. Several studies have been conducted on this topic and many different approaches have been illustrated. The purpose of this dissertation is to develop an online (usable on-board) control strategy in which the operating modes are defined using an instantaneous optimization method that minimizes the equivalent fuel consumption of a hybrid electric vehicle. The equivalent fuel consumption is calculated by taking into account the total energy used by the hybrid powertrain during the propulsion phases. The first section presents the hybrid vehicles characteristics. The second chapter describes the global model, with a particular focus on the energy management strategies usable for the supervisory control of such a powertrain. The third chapter shows the performance of the implemented controller on a NEDC cycle compared with the one obtained with the original control strategy.
APA, Harvard, Vancouver, ISO, and other styles
24

Bragagni, Cristiano. "Progettazione di uno strumento di analisi dati per sistemi SCADA-ENERGY Management System." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2014. http://amslaurea.unibo.it/7927/.

Full text
Abstract:
L’obiettivo di questa tesi è approfondire le competenze sulle funzionalità sviluppate nei sistemi SCADA/EMS presenti sul mercato, così da conoscerne le potenzialità offerte: tutte le conoscenze acquisite servono a progettare uno strumento di analisi dati flessibile e interattivo, con il quale è possibile svolgere analisi non proponibili con le altre soluzioni analizzate. La progettazione dello strumento di analisi dei dati è orientata a definire un modello multidimensionale per la rappresentazione delle informazioni: il percorso di progettazione richiede di individuare le informazioni d’interesse per l’utente, così da poterle reintrodurre in fase di progettazione della nuova base dati. L’infrastruttura finale di questa nuova funzionalità si concretizza in un data warehouse: tutte le informazioni di analisi sono memorizzare su una base dati diversa da quella di On.Energy, evitando di correlare le prestazione dei due diversi sottosistemi. L’utilizzo di un data warehouse pone le basi per realizzare analisi su lunghi periodi temporali: tutte le tipologie di interrogazione dati comprendono un enorme quantità d’informazioni, esattamente in linea con le caratteristiche delle interrogazioni OLAP
APA, Harvard, Vancouver, ISO, and other styles
25

Lam, Pik-wah Jocelyn. "Is ISO14001 a sustainable EMS solution for SMEs in Hong Kong? /." View the Table of Contents & Abstract, 2007. http://sunzi.lib.hku.hk/hkuto/record/B3960228X.

Full text
APA, Harvard, Vancouver, ISO, and other styles
26

Carlson, Greg P. "Hostile workplace violence directed toward rural emergency medical services (EMS) personnel /." Menomonie, WI : University of Wisconsin--Stout, 2007. http://www.uwstout.edu/lib/thesis/2007/2007carlsong.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
27

林碧華 and Pik-wah Jocelyn Lam. "Is ISO14001 a sustainable EMS solution for SMEs in Hong Kong?" Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2007. http://hub.hku.hk/bib/B45013779.

Full text
APA, Harvard, Vancouver, ISO, and other styles
28

Zhai, Endong. "The growth and capability development of electronics manufacturing service (EMS) companies." Thesis, University of Cambridge, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.613984.

Full text
APA, Harvard, Vancouver, ISO, and other styles
29

Rodeland, Jürgen. "Die Orgelbauwerkstatt Schöler in Bad Ems : ein Beitrag zur rheinischen Orgelgeschichte /." München ; Salzburg : E. Katzbichler, 1991. http://catalogue.bnf.fr/ark:/12148/cb35497870p.

Full text
APA, Harvard, Vancouver, ISO, and other styles
30

Wenzel, Franziska. "Situationen höfischer Kommunikation : Studien zu Rudolfs von Ems 'Willehalm von Orlens' /." Frankfurt am Main : P. Lang, 2000. http://catalogue.bnf.fr/ark:/12148/cb39013288b.

Full text
APA, Harvard, Vancouver, ISO, and other styles
31

Gunther, Joshua William. "DEVELOPING CHEMICALLY MUTAGENIZED EMS FORREST SOYBEAN POPULATION FOR HIGH OIL PROFILE." OpenSIUC, 2015. https://opensiuc.lib.siu.edu/theses/1825.

Full text
Abstract:
AN ABSTRACT OF THE THESIS OF JOSHUA GUNTHER, for the Masters of Science degree in Plant, Soil and Agricultural Systems, presented on November 2nd, 2015, at Southern Illinois University Carbondale. TITLE: DEVELOPING CHEMICALLY MUTAGENIZED EMS FORREST SOYBEAN POPULATION FOR HIGH OIL PROFILE. MAJOR PROFESSOR: Dr. Khalid Meksem SUPERVISOR: Dr. Naoufal Lakhssassi Soybeans (Glycine max (L.) Merr.) are the most important crop that provides a sustainable source of oil and protein worldwide. Five major fatty acids are known, Palmetic, Stearic, Oleic, Linoleic and Linolenic acid, and each is essential for both nutrition and biodiesel. Oil demand for biodiesel production is constantly on the rise both because of high crude oil prices and because of the search for a sustainable fuel source. In biodiesel production a high level of Oleic Acid is ideal. Commodity soybean oil usually contains around 20% oleic acid. The objective of this research is to increase the Oleic acid content to increase the quantity of biodiesel that can be produced from one bushel of soybeans. With the process of chemical mutagenesis using Ethyl Methanesulfonate (EMS), soybean populations can be produced with varying fatty acid levels. Once these populations are isolated and tested they can be bred into a new cultivar with higher percentages of Oleic acid and grown on a large scale for biodiesel production. From the ‘Forrest’ cultivar that was used in the chemical mutagenesis process, there was one mutant line (FM3 2014-2031) that produced 43.26% Oleic Acid. This was almost twice the concentration of the Forrest wild type that was used as a control which had an Oleic Acid concentration of 23.17%.
APA, Harvard, Vancouver, ISO, and other styles
32

Xu, Yilun. "The Efficacy of a Lifting Strap as an Ergonomic Intervention for EMS Providers: Does it make it easier to raise a Patient from Supine Lying Posture to Upright Sitting Posture?" The Ohio State University, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=osu1566175038221903.

Full text
APA, Harvard, Vancouver, ISO, and other styles
33

Ferreira, Maria Janaina da Silva. "EMS: um plug-in para exibição de mensagens de erro dos compiladores." Universidade Federal de São Carlos, 2015. https://repositorio.ufscar.br/handle/ufscar/7915.

Full text
Abstract:
Submitted by Milena Rubi (milenarubi@ufscar.br) on 2016-10-18T13:50:17Z No. of bitstreams: 1 FERREIRA_Maria_2015.pdf: 44702801 bytes, checksum: d58773cbbac5f088372d16f186805b06 (MD5)
Approved for entry into archive by Milena Rubi (milenarubi@ufscar.br) on 2016-10-18T13:50:31Z (GMT) No. of bitstreams: 1 FERREIRA_Maria_2015.pdf: 44702801 bytes, checksum: d58773cbbac5f088372d16f186805b06 (MD5)
Approved for entry into archive by Milena Rubi (milenarubi@ufscar.br) on 2016-10-18T13:50:43Z (GMT) No. of bitstreams: 1 FERREIRA_Maria_2015.pdf: 44702801 bytes, checksum: d58773cbbac5f088372d16f186805b06 (MD5)
Made available in DSpace on 2016-10-18T13:51:11Z (GMT). No. of bitstreams: 1 FERREIRA_Maria_2015.pdf: 44702801 bytes, checksum: d58773cbbac5f088372d16f186805b06 (MD5) Previous issue date: 2015-12-18
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Compiler error messages should allow programmers to understand and solve quickly problems found during the compilation process. However, compilers usually issue short contextless messages with little information and with terms that are difficult to understand. This work introduces the plug-in Error Message System (EMS) that allows the presentation of easy-to-understand and more meaningful error messages. EMS is a plug-in to the Eclipse IDE. It is highly configurable through Domain Specific Languages (DSLs). The DSLs allow that regular users build their own error messages and share them. Beginner programmers can use a set of error messages adapted to them thus reducing the time of understanding and correction of compilation errors.
As mensagens de erro dos compiladores devem permitir que os programadores compreendam e solucionem os problemas encontrados durante o processo de compilação rapidamente. Entretanto, os compiladores usualmente emitem mensagens curtas, sem contexto, pouco informativas e com termos de difícil compreensão. Este trabalho apresenta o plug-in Error Message System (EMS) que permite a apresentação das mensagens de erro mais fáceis de entender e mais informativas. EMS é um plugin para a IDE Eclipe e é altamente configurável através de linguagens específicas de domínio(LED). As LEDs permitem que usuários comuns façam suas próprias mensagens de erro e as compartilhem. Programadores iniciantes podem utilizar um conjunto de mensagens adaptadas a eles, reduzindo o tempo de compreensão e correção dos erros de compilação.
APA, Harvard, Vancouver, ISO, and other styles
34

Hagarty, David. "A model for environmental management system (EMS) effectiveness review in British Columbia." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp01/MQ37403.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
35

Saini, Devashish. "Development and testing of feed a feedback expert system for EMS documentation /." Thesis, Birmingham, Ala. : University of Alabama at Birmingham, 2007. http://www.mhsl.uab.edu/dt/2007m/saini.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
36

Goodchild, Emma. "The implications for industry of internationally recognised environmental management system (EMS) standards." Thesis, University of Salford, 1999. http://usir.salford.ac.uk/14755/.

Full text
Abstract:
The first industry standard for environmental management systems, BS 7750, was published in the UK in September 1994. Since then we have seen the EC Ecomanagement and Audit Scheme come into force in April 1995 and an international environmental management system standard, ISO 14001, published in September 1996. The EMS standards allow organisations to have their environmental management systems externally assessed and approved. The first companies became registered to BS 7750 in April 1995, with approximately 70 organisations gaining certification during its first year of operation. Since then uptake of the standards has been steady but slow with many companies delaying their decision until the implications of adopting such a recognised approach have been clarified. This research reviews the experiences of organisations adopting the standards during their early years of operation. Key lessons are learnt from a three year Teaching Company Scheme project designing and implementing an EMS for a large chemical manufacturer. The author also draws on evidence obtained through a survey of organisations gaining BS 7750 certification during its first year of operation and a number of detailed case-studies. The aim of the research is to identify and assess the implications for industry of the EMS standards. Their impacts on business performance in terms of operational efficiency, competitive advantage, legislative compliance, public image and staff morale are assessed and their variability between organisations explained. The resource commitments required to achieve certification are identified including management time, capital expenditure, consultancy fees and certification charges. Accounting mechanisms for comparing the costs and income associated with environmental activities are reviewed and their applicability to monitoring the performance of an EMS evaluated. The research concludes with the identification of decision making criteria to assist companies in determining their environmental strategy.
APA, Harvard, Vancouver, ISO, and other styles
37

Hadjidakis, S. "The implications of EMS membership on the conduct of national monetary policies." Thesis, University of Reading, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.383147.

Full text
APA, Harvard, Vancouver, ISO, and other styles
38

Aljalahema, Rashid Shaheen. "Answers to EMS Queries About Dynamic Deployment: Fractile Performance, Cost, and Management." Diss., The University of Arizona, 2015. http://hdl.handle.net/10150/603515.

Full text
Abstract:
Dynamic deployment is an Emergency Medical Services (EMS) ambulance management strategy where 911 call demand coverage is maximized continuously through time. Unlike static deployment where dispatched ambulances leave a coverage gap until they return to their home-base after service, dynamic deployment redeploys idle ambulances to different locations if that leads to an increase in demand coverage. The purpose of this dissertation was to study dynamic deployment as a viable, beneficial, and cost-effective methodology in managing EMS ambulances and crews. The literature, while rich in studies on static deployment, was lacking when it came to ambulance management strategies like dynamic deployment. Through a discrete-event simulation model, hypothetical EMS systems were simulated under dynamic and static deployment with different demand patterns, demand loads, and system sizes. Dynamic deployment was found to be as good, or often better, in emergency response metrics than static deployment. When EMS systems want to meet a certain response goal, dynamic deployment may enable them to achieve that performance with fewer vehicles than static deployment. While savings in number of vehicles translate to substantial savings in crew wages and vehicular purchasing costs, dynamic deployment may increase operating costs per vehicle because of the extra mileage involved in redeployments. Many EMS systems with average vehicular utilizations of 40% to 50% may find, however, that dynamic deployment may be both cost-effective and beneficial in improving response performance. Different redeployment strategies were studied to address the added travel costs of dynamic deployment and a min-sum assignment model was found to decrease redeployment travel the most without impacting response performance. Finally, a procedure and a mathematical model were developed to route vehicles intelligently such that demand coverage is maximized throughout the redeployment process.
APA, Harvard, Vancouver, ISO, and other styles
39

Johnson, Monica R. "Understanding Factors That Affect the Adoption of Ergonomic Intervention Among EMS Workers." The Ohio State University, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=osu1293401168.

Full text
APA, Harvard, Vancouver, ISO, and other styles
40

Bentley, Melissa Ann. "An Assessment of Depression, Anxiety, and Stress among Nationally Certified EMS Professionals." The Ohio State University, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=osu1306521665.

Full text
APA, Harvard, Vancouver, ISO, and other styles
41

Kling, Michael Patrick. "Needs Assessment for Mental Health Support Towards Emergency Medical Service (EMS) Personnel." Thesis, Regent University, 2021. http://pqdtopen.proquest.com/#viewpdf?dispub=27961789.

Full text
Abstract:
Understanding and assessing the needs of Emergency Medical Service (EMS) personnel and other first responders is crucial for providing these individuals with the resources needed within their community. The literature discusses how EMS personnel are at risk for psychological impairment due to routine exposure to traumatic events and occupational stressors within EMS organizations. Additionally, the research has supported the importance of positive coping abilities, organizational belongingness, and social support within the lives of EMS personnel to enable them to resiliently handle the occupational stress of their job. This study investigated the occupational needs of EMS providers to determine if they are receiving resources within their organization to cope with occupational stressors. Participants for this study comprised (n=153) paramedics and fire-fighters from the Tidewater EMS Council organization. A needs assessment was conducted to explore correlations between quality of life, resiliency, years of service, level of education, burnout, secondary traumatic stress, interpersonal support, positive and negative religious coping, and the occupational needs of EMS personnel. The results revealed that burnout (r=4.27**) and secondary traumatic stress (r.215*) were important factors for determining occupational turnover among EMS personnel. Furthermore, EMS providers reported occupational needs such as easier access to mental health, improved staff relations, adequate staffing, and improved shift hours are needed within their organization. Future research should explore differences in occupational needs with EMS providers among EMS organizations in metropolitan and rural communities. Keywords: Emergency Medical Services (EMS), Burnout, Occupational Stress, Traumatic Critical Incidents
APA, Harvard, Vancouver, ISO, and other styles
42

Turečková, Marie. "Itálie v procesu formování Evropské měnové unie." Master's thesis, Vysoká škola ekonomická v Praze, 2006. http://www.nusl.cz/ntk/nusl-119.

Full text
Abstract:
Diplomová práce se zabývá procesem formování Evropské měnové unie od počátku samotného integračního procesu v Evropě a úlohou Itálie v tomto procesu. Naznačuje hlavní charakteristiky země, které později podmínily pozici a zájmy Itálie, které prosazovala při postupném vytváření měnové unie. Na druhou stranu ukazuje, jakým způsobem a do jaké míry má evropská měnová integrace vliv na Itálii a její hospodářství. Hlavním cílem práce je zjistit jakou úlohu Itálie v tomto projektu hrála a zda současná podoba integrace je pro ni výhodná.
APA, Harvard, Vancouver, ISO, and other styles
43

Kulík, Jindřich. "Elektromagnetická interference kardiostimulátorů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217723.

Full text
Abstract:
This thesis deals with electromagnetic compatibility of implantable electro-medical devices using in cardiology. The main aim of this thesis is detection of the resistance of implantable pacemakers (PM) and implantable cardioverter defibrillators (ICD) to the electromagnetic interference. In the first part of this thesis, a function of the heart, which is necessary for understanding of PM and ICD operation, is described. The function and construction of PM and ICD is detailed in the theoretical part as well. The next part is focused on the electromagnetic compatibility. The next part is description of the measurement method and the experimental arrangement used for practical experiments with electromagnetic resistance of PM and ICD.
APA, Harvard, Vancouver, ISO, and other styles
44

Maillard, Aurore. "Optimisation d'un électromyostimulateur intelligent pour le reconditionnement musculaire." Thesis, Bourgogne Franche-Comté, 2017. http://www.theses.fr/2017UBFCK026/document.

Full text
Abstract:
L’électrostimulation (EMS) est l’envoi d’impulsion électrique par le biais d’électrodes. Ces électrodes de surface sont posées sur la zone musculaire à stimuler. Cette technique est de plus en plus utilisée dans la rééducation musculaire lors de blessures, de pertes de mouvement ou d’atrophie. Ces EMS sont généralement combinées avec l’électromyogramme (EMG) qui enregistre l’activité électrique du muscle. Le but de la thèse est d’optimiser les paramètres de stimulation en temps réel lors d’une EMS. Pour ce faire, de nouvelles stratégies de contrôle robustes sont à développer. Nous avons convenu durant la thèse de travailler sur un modèle spécifique
This project aims to optimize smart electromyostimulators for the muscular reeducation. The electrostimulator optimization aims to improve the electrostimulation sessions (EMS) by obtaining informations on the muscular electical stimulations and the control application in real time in order to control the muscular response. Various control methods of the muscular force are been developed and applied on an accurate model. In first, the techniques will be applied on the partial model without taking into account the muscular fatigue then in second in taking into account the presence of fatigue and its effects. Theses control methods act on the stimulation parameters in frequency and in amplitude in function of the muscular response
APA, Harvard, Vancouver, ISO, and other styles
45

Giannini, Paolo. "EMS Way: uno strumento lean per raggiungere obiettivi strategici attraverso il cambiamento culturale." Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2018. http://amslaurea.unibo.it/17035/.

Full text
Abstract:
Questo elaborato descrive la mia esperienza di tirocinio presso lo stabilimento Electrolux di Forlì. Inizio introducendo la realtà del gruppo Electrolux, i suoi valori, le sue fondamenta, la strategia attuale e futura per essere leader nel mercato. Il miglioramento continuo, la capacità di adattarsi ai cambiamenti sempre più frequenti ed imprevedibili, l’abilità di offrire un prodotto competitivo sia per qualità sia per costi, sono stati affrontati in Electrolux anche attraverso la filosofia Lean Manufacturing, introdotta a livello mondiale in tutte le fabbriche del gruppo a partire dal 2005. Dopo aver raccontato in breve le origini del Lean, mi concentro sul programma Lean di Electrolux denominato EMS, Electrolux Manufacturing System, grazie al quale Electrolux ha ottenuto un grande cambiamento culturale a tutti i livelli dell’organizzazione, riflesso sia nella modalità di affrontare le sfide di business sia nel modo di lavorare quotidianamente. Oggetto principale del tirocinio e dell’elaborato è l’EMS Way, uno degli strumenti più complessi di EMS, che ho potuto studiare e applicare personalmente su un impianto. Il capitolo 3 espone, quindi, lo studio preliminare dell’impianto di clinciatura dell’assieme per la ventilazione del forno, la ricerca dei problemi e la definizione dei risultati, dettati dall'importanza dell’assieme clinciato per le linee di produzione dei forni. Altri aspetti affrontati sono stati legati alla parte EMS del cambiamento culturale delle persone. Gli strumenti utilizzati sono stati: il Forum EMS, una riunione settimanale in cui vengono presentati piccole attività di sicurezza, qualità e processo realizzate in fabbrica; 5D Management Audit, audit mensile nei vari Focus Team per verificare la corretta applicazione degli strumenti di base EMS; le riunioni di PM, fatte tra reparto manutenzione e conduttori degli impianti per parlare dei principali problemi e prevedere un piano d’azione.
APA, Harvard, Vancouver, ISO, and other styles
46

Vatter, Jens. "Elektrische Muskelstimulation als Ganzkörpertraining Multicenterstudie zum Einsatz von Ganzkörper-EMS im Fitness-Studio." München AVM, 2009. http://d-nb.info/1001249917/04.

Full text
APA, Harvard, Vancouver, ISO, and other styles
47

Vatter, Jens. "Elektrische Muskelstimulation als Ganzkörpertraining : Multicenterstudie zum Einsatz von Ganzkörper-EMS im Fitness-Studio /." München : AVM, 2010. http://deposit.d-nb.de/cgi-bin/dokserv?id=3450037&prov=M&dokv̲ar=1&doke̲xt=htm.

Full text
APA, Harvard, Vancouver, ISO, and other styles
48

Forejtová, Lucie. "Environmentální management jako dobrovolný nástroj environmentální politiky." Master's thesis, Vysoká škola ekonomická v Praze, 2008. http://www.nusl.cz/ntk/nusl-11070.

Full text
Abstract:
Environmental management is one of the voluntary tools for environmental policy, which provides instructions to organizations, how they can coordinate their products, activities and services to minimize their negative environmental impacts. This work describes and compares two basic approaches for environmental management system (EMS) implementation - ISO 14001 Standard and EMAS II Regulation in terms of requirements for an organization. Attention is paid to advantages and disadvantages of EMS implementation in an organization too. In analytical part of this work, environmental management is analyzed in light of a number of certified and certifying organizations, after that follows cost-benefit analysis of EMS focused on organizations and SWOT analysis. The goal of this work is to find out on the basis of the results of these analyses, whether environmental management system implementation is a competitive advantage of an organization, or not.
APA, Harvard, Vancouver, ISO, and other styles
49

Huang, Jack Yin-Chun, and 黃尹俊. "Association between Sleepiness and EMS Safety Outcome among EMS Providers in Taiwan." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/13348164114592937324.

Full text
APA, Harvard, Vancouver, ISO, and other styles
50

Lin, Keng-Hung, and 林耿弘. "Taiwan traditional EMS Provider''''s strategic repositioning ~ take OSE’s EMS S.B.U. as example." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/03190884988722080561.

Full text
Abstract:
碩士
國立中山大學
企業管理學系研究所
91
Computer and communication OEM companies worldwide adopt outsourcing strategy in 1990 - 2000. European & American large EMS providers grow very quickly accordingly. But Taiwan don’t have a position in this trend, even we think we are very good at manufacturing. We take this chance to review what we think about manufacturing in the past 10 years and take this lesson to see our next 10 years. We also take the largest Taiwan EMS provider, OSE’s FP Group as an example to see her strategy. As OSE’s FP Group go into niche market before year 2000, she even turn loss to earning from the bad year 2000 to year 2002
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the bibliographies on the topic 'EMS' for other source types:
Journal articles Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography