Dissertations / Theses on the topic 'Eliptická metoda'

The diploma thesis deals with the study of Rayleigh-Bénard convection for Rayleigh numbers in the range 1E8-1E14. The evaluated data come from an experiment with cryogenic helium in a cylindrical cell in a configuration with cell diameter D = 30 cm, height L = 30 cm and a second configuration with cell diameter D = 30 cm, height L = 15 cm. Miniature sensors recorded temperature fluctuations over time under various physical conditions and properties of helium. Using MATLAB software, the output parameters of the system (Nusselt and Reynolds numbers) and their dependence on the control parameters (Rayleigh and Prandtl numbers) were determined from the measured data. A new approach to the distribution of measured signals according to the direction of large scale circulation was used in the work, which leads to improved analysis. Reynolds numbers were evaluated using the so-called elliptic method. Furthermore, the work deals with the study of the coherent structure of the large scale circulation inside the cell.

Orientador: Maria Cristina Cunha Bezerra
Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Matematica, Estatistica e Computação Científica
Made available in DSpace on 2018-07-17T17:25:28Z (GMT). No. of bitstreams: 1 Silveira_DimasLeopoldo_M.pdf: 991957 bytes, checksum: debafadf8016f1f823beedb32817193b (MD5) Previous issue date: 1987
Resumo: Não informado.
Abstract: Not informed.
Mestrado
Mestre em Matemática Aplicada

This thesis deals with creation of elliptic curves generator. MIRACL library and C++ language are used. One of important issues is to determine the order of the elliptic curve group. SEA algorithm (Schoof–Elkies–Atkin) is used for point counting on the elliptic curve. Method with this algorithm is called as counting points method, SEA method etc. Next method is CM method. Both methods are available in the generator. The measurements of dependency of basic operations speed on the group size and parameters were done. ECIES hybrid scheme was implemented. It is practical verification of proper functionality of the generator. Another benchmarks measured dependency of ECIES encryption and decryption on various parameters, e.g. size of the curve, generating method, message size etc.

Partial differential equations solution and methods for transformation to a large sets of ordinary equations is described in this work. Taylor series method is important for this work. This method needs higher derivatives for correct work. Ways how to compute higher derivatives are also discused in this work.

Orientador: Jose Roberto Nunhez
Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Quimica
Made available in DSpace on 2018-08-11T08:15:27Z (GMT). No. of bitstreams: 1 Lopes_GabrielaCantarelli_M.pdf: 1710566 bytes, checksum: efab0c6308734536b15c2ef91d4d8337 (MD5) Previous issue date: 2008
Resumo: Processos que envolvem escoamentos de fluidos no interior de dutos estão presentes em muitas aplicações industriais. Na indústria petroquímica um desses processos que vem se tornando cada vez mais importante é o craqueamento catalítico de frações pesadas do petróleo, já que as converte em frações leves e mais nobres. Por causa da crescente demanda mundial por gasolina e GLP e à sua alta rentabilidade para uma refinaria de petróleo, unidades de craqueamento catalítico em leito fluidizado (FCC) estão presentes em todo o mundo. Testes experimentais costumam ser usados no estudo dos fenômenos envolvidos nesse processo. Porém esse tipo de análise possui alto custo, que pode ser reduzido com o uso de simulações computacionais em seu estudo inicial. Assim, o objetivo deste trabalho foi desenvolver um modelo tridimensional e elíptico, em linguagem Fortran, capaz de fornecer dados para a análise preliminar de escoamentos no interior de reatores de FCC. Na modelagem desses problemas são usadas equações diferenciais parciais, e essas não possuem solução analítica conhecida, sendo necessário o emprego de métodos numéricos para esse fim. Neste trabalho foi usado o Método dos Volumes Finitos, que tem a função de substituir as equações diferenciais parciais por equações algébricas aplicadas a pequenos volumes de controle finitos pertencentes ao domínio. Uma das maiores dificuldades encontradas no tratamento numérico de escoamentos incompressíveis é a determinação de um campo de pressão que satisfaça a Equação da Continuidade. Esse problema foi resolvido fazendo-se uso da abordagem acoplp.da de solução. Para análise do modelo foram obtidos perfis numéricos de velocidade e pressão para fluidos escoando em regimes laminar e turbulento, que foram validados usando-se os dados obtidos com a solução analítica das equações, por correlações (semi-) empíricas ou por dados experimentais, conforme cada um dos casos. Notou-se que o modelo representa muito bem casos laminares, e gue 11.oS casos turbulentos foi necessário um maior refino da malha próximo a parede do tubo. Também foram feitas simulações para que se pudessem observar as características tridimensionais, elípticas e transientes da modelagem do escoamento. De maneira geral o modelo se mostrou bastante rápido, convergindo em poucas iterações. Palavras-Chave: Fluidodinâmica computacional; dutos cilíndricos; modelo tridimensional e elíptico; método dos Volumes Finitos; solução acoplada; turbulência
Abstract: Processes involving fluid flow in tubes are present in many industrial applications. In petrochemical industry one of these processes that are becoming more and more important is the fluid catalytic cracking of heavy petroleum fractions. This fact is due to the process capacity to convert heavy fractions in light and valuable ones. Because of the increasingly worldwide demand for gasoline and LPG and its high yield for a petroleum refinery, fluid catalytic cracking (FCC) units are present in the whole world. Experimental tests are used in the study of the phenomena involved in this processo However this kind of analysis has high cost which can be reduced by using computational simulations in its initial study. Thus, the aim of this work was the development of a three-dimensional and elliptical mo dei in Fortran language in order to provide data for fluid flow preliminary analysis in FCC reactors. Partial differential equations were used in the modeling of these problems. These equations do not have known analytical solution, being necessary therefore the use of numerical methods. In this work the Finite Volume Method were applied with this purpose. This method has as a role to substitute the partial differential equations of the mo dei for algebric equations applied to small finite control volumes of the domain. One of the biggest difficulties found in the numerical treatment of incompressible fluid flows is the determination of apressure field that satisfies the Continuity Equation. This problem was solved using the coupled solution approach. For model analysis, numerical velocity and pressure proJ:iles for laminar and turbulent flows were obtained, that had been validated using the data obtained through the analytical solution of the equations, by empirical correlations or by experimental data, according to each one of the cases. The model represented well laminar cases, and in the turbulent ones the mesh had to be more refined near the tube wall. Other simulations were performed, in aQalyzing the three-dimensional, elliptical and transient model characteristics. In general, the mo dei was very fast, converging in a few interations. Keywords: Computational fluid dyn~mic; cylindrical ducts; three-dimensional and elliptical model; Finite Volume Method; coupled solution; turbulence
Mestrado
Desenvolvimento de Processos Químicos
Mestre em Engenharia Química

Submitted by Luciana Ferreira (lucgeral@gmail.com) on 2017-03-06T14:33:05Z No. of bitstreams: 2 Dissertação - Angelo Guimarães - 2017.pdf: 2117097 bytes, checksum: dec3403d71344aacfe3834890266b503 (MD5) license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5)
Approved for entry into archive by Luciana Ferreira (lucgeral@gmail.com) on 2017-03-06T14:33:53Z (GMT) No. of bitstreams: 2 Dissertação - Angelo Guimarães - 2017.pdf: 2117097 bytes, checksum: dec3403d71344aacfe3834890266b503 (MD5) license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5)
Made available in DSpace on 2017-03-06T14:33:53Z (GMT). No. of bitstreams: 2 Dissertação - Angelo Guimarães - 2017.pdf: 2117097 bytes, checksum: dec3403d71344aacfe3834890266b503 (MD5) license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5) Previous issue date: 2017-03-01
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES
In this work we study existence and multiplicity of weak solutions for the eliptic problem with semilinear concave convex term, in a limited domain of a N-dimensional euclidean space. If we take f=0 and σ=1 we have a problem homogeneous with critical Sobolev exponent in which we use the Mountain Pass Theorem to find existence of a solution when pNeste trabalho estudaremos existência e multiplicidade de soluções fracas do problema elíptico com termo semilinear côncavo-convexo, em um domínio limitado de um espaço euclidiano de dimensão N. Ao tomarmos f=0 e σ=1 temos um problema homogêneo com expoente crítico de Sobolev em que utilizamos o Teorema do Passo da Montanha para encontrar existência de uma solução quando p