Academic literature on the topic 'Electronic board design'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Electronic board design.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Electronic board design"
Kolesnyk, Kostiantyn, Andrzej Łukaszewicz, Volodymyr Dutka, Dmytro Zahoruiko, and Bohdan Vasylyshyn. "Automated design of printed circuit boards made by electronic computer –aided design (CAD) with the next using in CNC- machine." Computer Design Systems. Theory and Practice 4, no. 1 (2022): 9–16. http://dx.doi.org/10.23939/cds2022.01.009.
Full textLiu, Yang, Yun Feng Zhang, and Ya Kui Xing. "The Optimized Design of the Electronic Bus Stop Board." Applied Mechanics and Materials 97-98 (September 2011): 1195–200. http://dx.doi.org/10.4028/www.scientific.net/amm.97-98.1195.
Full textAkash R., Maya Srinivas, Venugopal Rao S, Sanjan Kashyap, Adithya T.G., Pavithra G., Sindhu Sree M., and T.C.Manjunath. "Wireless notice board design using bluetooth technologies." international journal of engineering technology and management sciences 6, no. 6 (November 28, 2022): 230–33. http://dx.doi.org/10.46647/ijetms.2022.v06i06.035.
Full textGOROSHKO, Andrii, Igor KOVTUN, and Maryna ZEMBYTSKA. "IMPROVING THE ACCURACY OF THE VIBRATION ANALYSIS OF ON-BOARD ELECTRONICS PRINTED BOARDS." Herald of Khmelnytskyi National University. Technical sciences 313, no. 5 (October 27, 2022): 301–6. http://dx.doi.org/10.31891/2307-5732-2022-313-5-301-306.
Full textYang, Yan Fei, Jian Wang, Xue Jian Liu, Xiao Juan Yang, and Ya Hu. "Design of Electronic Seal Terminal for Tank Vehicles." Applied Mechanics and Materials 620 (August 2014): 133–36. http://dx.doi.org/10.4028/www.scientific.net/amm.620.133.
Full textSuriano, Domenico. "Design and Development of an Electronic Board for Supporting the Operation of Electrochemical Gas Sensors." Hardware 2, no. 2 (June 14, 2024): 173–89. http://dx.doi.org/10.3390/hardware2020009.
Full textUSLU-OZKUCUK, Gonca. "TRIAC Based Isolated AC Load Drive Equivalent Circuit Design of Solid-State Relay." Eurasia Proceedings of Science Technology Engineering and Mathematics 26 (December 30, 2023): 183–89. http://dx.doi.org/10.55549/epstem.1409469.
Full textPandey and Vora. "Open Electronics for Medical Devices: State-of-Art and Unique Advantages." Electronics 8, no. 11 (November 1, 2019): 1256. http://dx.doi.org/10.3390/electronics8111256.
Full textZhang, Cai Rong, Guo Liang Liu, and Bin Wei. "Design and Implementation of Electronic Bus Stop Boards System Based on Wireless Communication Module." Applied Mechanics and Materials 651-653 (September 2014): 2441–44. http://dx.doi.org/10.4028/www.scientific.net/amm.651-653.2441.
Full textBucolo, Maide, Arturo Buscarino, Luigi Fortuna, Carlo Famoso, Mattia Frasca, Antonino Cucuccio, Gaetano Rasconà, and Giovanni Vinci. "A Comparative Analysis of Computer-Aided Design Tools for Complex Power Electronics Systems." Energies 14, no. 22 (November 18, 2021): 7729. http://dx.doi.org/10.3390/en14227729.
Full textDissertations / Theses on the topic "Electronic board design"
McCalib, David Jr. "Design method of a modular electronic printed circuit board testing system." Thesis, Massachusetts Institute of Technology, 2013. http://hdl.handle.net/1721.1/85790.
Full textCataloged from PDF version of thesis.
Includes bibliographical references (pages 52-54).
The failure rate of the printed circuit board electronic testing process is higher than acceptable at a Lenze Americas factory. This thesis will understand the root causes of failure, and use system engineering methods to decide what course of action should be taken. A Tradespace analysis is used to help decompose some of the complexity into a visualization that simplifies the decision process. The Tradespace analysis suggests that more utility can be achieved by upgrading the design of existing test fixtures versus purchasing off of the shelf solutions. The second phase will identify a design concept, offer specific design solutions, and finally a fully designed system that is capable of improving the performance of the test fixtures in electronic board test area by 50%. The system is then upgradable with in-line conveyors to run autonomously decoupling the operator from the process.
by David McCalib, Jr.
M. Eng. in Manufacturing
Andersson, Peter. "Design of a channel board used in an electronic warfare target simulator." Thesis, Linköping University, Department of Electrical Engineering, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-7529.
Full textA channel board was designed for a DRFM circuit. The DRFM is implemented in a Virtex-4 FPGA from Xilinx. In the future a similar channel board is intended to be used for target echo generation in ELSI which is an electronic warfare simulator at Saab Bofors Dynamics in Linköping.
Besides the DRFM circuit the channel board consists of analog-to-digital converters, digital-to-analog converters, Ethernet plug-in board with a microcontroller, voltage regulators, FPGA configuration memory, voltage amplifiers, current amplifiers, oscillator, buffers/drivers and bus transceivers. The sample rate is 200 MHz and LVDS signalling standard is used between the DRFM circuit and the converters.
The channel board has a JTAG interface which enables in-system programming of the FPGA. This implies that the DRFM can easily be redesigned. An external computer can manage the channel board via Ethernet. Software was developed for the microcontroller on the channel board and for the external computer. The function of the channel board is heavily dependent on the DRFM circuit.
The channel board design resulted in the assembly of a prototype circuit board. Measurements were performed in a lab and the channel board was approved to be integrated in ELSI for further tests.
Shina, Sammy G. "A design quality and cost model for printed circuit board assembly /." Thesis, Connect to Dissertations & Theses @ Tufts University, 1998.
Find full textAdviser: Anil Saigal. Submitted to the Dept. of Mechanical Engineering. Includes bibliographical references. Access restricted to members of the Tufts University community. Also available via the World Wide Web;
Alalait, Suliman. "The design and implementation of a video compression development board." Thesis, Stellenbosch : University of Stellenbosch, 2011. http://hdl.handle.net/10019.1/6547.
Full textThis thesis describes the design and implementation of a video compression development board as a standalone embedded system. The board can capture images, encode them and stream out a video to a destination over a wireless link. This project was done to allow users to test and develop video compression encoders that are designed for UAV applications. The board was designed to use an ADSP-BF533 Blackfin DSP from Analog Devices with the purpose of encoding images, which were captured by a camera module and then streamed out a video through a WiFi module. Moreover, an FPGA that has an interface to a logic analyzer, the DSP, the camera and the WiFi module, was added to accommodate other future uses, and to allow for the debugging of the board. The board was tested by loading a H.264 BP/MP encoder from Analog Devices to the DSP, where the DSP was integrated with the camera and the WiFi module. The test was successful and the board was able to encode a 2 MegaPixel picture at about 2 frames per second with a data rate of 186 Kbps. However, as the frame rate was only 2 frames per second, the video was somewhat jerky. It was found that the encoding time is a system limitation and that it has to be improved in order to increase the frame rate. A proposed solution involves dividing the captured picture into smaller segments and encoding each segment in parallel. Thereafter, the segments can be packed and streamed out. Further performance issues about the proposed structure are presented in the thesis.
Chen, Ruijun. "Fixturing analysis and synthesis for flexible circuit board assembly." Diss., Georgia Institute of Technology, 2003. http://hdl.handle.net/1853/17866.
Full textBrownlee, Kellee Renee. "Evaluation of low stress dielectrics for board applications." Thesis, Georgia Institute of Technology, 2002. http://hdl.handle.net/1853/20040.
Full textArn, Krissa Elizabeth 1980. "Design of a non-contact vibration measurement and analysis system for electronic board testing." Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/18070.
Full textIncludes bibliographical references (p. 107).
Traditional vibration measurement methods involve placing accelerometers at discrete locations on a test object. In cases where the test specimen is small in mass, the addition of these measurement transducers can alter its dynamic behavior and lead to erroneous test data. In this thesis a Non-Contact Vibration Measurement and Analysis System has been designed, built, and tested for electronic board testing. Through a product design process, all feasible methods were considered and three optically based concepts were explored: holographic interferometry, area scaling, and displacement sensor grid. Through concept testing and analysis, the displacement sensor grid method was chosen for the design. The final system incorporates four laser displacement sensors with a vertical scrolling mechanism that attaches to the vibration table's side rails. This manual scanning system provides a quick, low cost method for capturing multiple points on the test object during vibration testing. The MATLAB based software package acquires the raw sensor output and processes it with a five step analysis program. With this software, an 8x4 grid of electronic board displacements were easily transformed into a movie showing the board displacing through its first mode. The system requires the sensors be positioned lcm away from the test object with the sensors reading up to [plus-minus]lmm of movement. The sensors have a maximum sample rate of 7.8 kHz and can be used to measure the displacements of any surface type or material. The measurement grid resolution is 0.7 inches horizontally 0.4 inches vertically. Testing showed that the system captured the natural frequency and peak displacement of the board's first mode within 1.5% accuracy and 0.7% accuracy respectively
(cont.) when compared with previous accelerometer grid testing. Exceeding its design goals, this non-contact measurement and analysis device provides a highly versatile, accurate, and low cost optical alternative to accelerometers. Also it shows numerous benefits over more complex and costly optical measurement methods. The use of this system eliminates any question of whether mass loading effects are tainting vibration test data. A hardware and software manual are included for reference at the end of this thesis along with a software CD.
by Krissa Elizabeth Arn.
S.M.
Grobler, H. "Aspects affecting the design of a low earth orbit satellite on-board computer." Thesis, Stellenbosch : Stellenbosch University, 2000. http://hdl.handle.net/10019.1/51621.
Full textENGLISH ABSTRACT: Satellites are not all made equal. The large number of possible orbits, desired functionality and budget constraints are but a few of the factors that influence the design of a satellite. Given a particular set of design requirements, a number of designs may meet these requirements. Each of these designs will typically entail a trade-off between a number of (conflicting) parameters, whilst still satisfying the system requirements. The On-Board Computer (OBC) of a satellite, the satellite subsystem primarily responsible for the operational control of a satellite, can consequently be designed in any of a number of different ways. As the factors that influence the flight performance of an OBC differs to those of a terrestrial computer, the OBC design will therefore be significantly different. A high-level overview of the factors that impact OBC design and operation is presented. Improvements to the existing designs are proposed. In conclusion, a number of guidelines for a future OBC design also are given.
AFRIKAANSE OPSOMMING: Elke satelliet het unieke eienskappe wat bepaal word deur onderandere, die teiken wentelbaan, verwagte funksionaliteit en koste oorweegings. Vir 'n spesefieke stelselontwerp bestaan daar 'n aantal moontlike ontwerpe wat aan die stelsel vereistes voldoen. Elk van hierdie ontwerpe sal tipies behels dat verskillende parameters teen mekaar afgespeel word, terwyl die stelsel vereistes steeds aan voldoen word. Die Aanboord Rekenaar (AR) van 'n satelliet, die satelliet substelsel hoofsaaklik verantwoordelik vir die beheer van die satelliet, kan vervolgens uit een van veele moontlike ontwerpe bestaan. Aangesien die faktore wat die werkverrigting van 'n AR beinvloed verskil van die van 'n rekenaar wat op die aard oppervlak gebruik word, sal die AR ontwerp dienooreenkomstig verskil. 'n Hoevlak oorsig van die faktore wat AR ontwerp beinvloed sal gegee word. Verbeteringe wat aan die huidige AR ontwerpe gedoen kan word sal bespreek word. Ter afsluiting sal 'n aantal riglyne vir toekomstige AR ontwerpe gegee word.
Rajagopal, Abhilash. "Printed circuit board (PCB) loss characterization up-to 20 GHz and modeling, analysis and validation." Diss., Rolla, Mo. : University of Missouri-Rolla, 2007. http://scholarsmine.umr.edu/thesis/pdf/Rajagopal_09007dcc803bf920.pdf.
Full textVita. The entire thesis text is included in file. Title from title screen of thesis/dissertation PDF file (viewed November 26, 2007) Includes bibliographical references (p. 112-113).
Hari, Krishnan Prem Kumar. "Design and Analysis of a Dynamic SpaceWire Routing Protocol for Reconfigurable and Distributed On-Board Computing Systems." Thesis, Luleå tekniska universitet, Rymdteknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-76534.
Full textBooks on the topic "Electronic board design"
Kirkpatrick, James M. Electronic drafting and printed circuit board design. Albany, N.Y: Delmar Publishers, 1985.
Find full textKirkpatrick, James M. Electronic drafting and printed circuit board design. 2nd ed. Albany, N.Y: Delmar Publishers, 1989.
Find full textNeamen, Donald A. Electronic circuit analysis and design. Chicago: Irwin, 1996.
Find full textNeamen, Donald A. Electronic circuit analysis and design. 2nd ed. Boston: McGraw-Hill, 2001.
Find full textLund, Preben. Quality assessment of printed circuit boards: A practical, comprehensive guide to the inspection and evaluation of printed circuit board quality. Westlake Village, Calif: Bishop Graphics, 1985.
Find full textDavid, Goulet, ed. Bare board drilling: Trends and development in printed circuit board drilling. San Francisco: Miller Freeman, 1992.
Find full textHossain, Akram. Computer-aided electronic circuit board design and fabrication: Using OrCAD/SDT and OrCAD/PCB software tools. Englewood Cliffs, N.J: Prentice Hall, 1996.
Find full textDean, D. J. Thermal design of electronic circuit boards and packages. Ayr, Scotland: Electrochemical Publications, 1985.
Find full textFinnegan, Thomas. Unity Android game development by example beginner's guide: Learn how to create exciting games using Unity 3D for Android with the help of hands-on examples. Birmingham, UK: Packt Publishing, 2013.
Find full textA, Harper Charles, ed. Electronic assembly fabrication: Chips, circuit boards, packages, and components. New York: McGraw-Hill, 2002.
Find full textBook chapters on the topic "Electronic board design"
Kohlhammer, Bernd. "Printed Circuit Board Design." In The Electronic Design Automation Handbook, 582–604. Boston, MA: Springer US, 2003. http://dx.doi.org/10.1007/978-0-387-73543-6_25.
Full textFoitzik, Andreas. "Printed Circuit Board Technologies." In The Electronic Design Automation Handbook, 567–81. Boston, MA: Springer US, 2003. http://dx.doi.org/10.1007/978-0-387-73543-6_24.
Full textZiaja, Thomas A., and Earl E. Swartzlander. "Boundary Scan in Board Manufacturing." In Economics of Electronic Design, Manufacture and Test, 137–42. Boston, MA: Springer US, 1994. http://dx.doi.org/10.1007/978-1-4757-5048-5_12.
Full textDavis, Brendan. "Economic Modeling of Board Test Strategies." In Economics of Electronic Design, Manufacture and Test, 31–43. Boston, MA: Springer US, 1994. http://dx.doi.org/10.1007/978-1-4757-5048-5_3.
Full textMälhammar, Åke. "Application of Thermal Territories for Air-Cooled Circuit Board Design." In Thermal Management of Electronic Systems II, 179–86. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5506-9_17.
Full textBaudin, V., M. Diaz, P. Owezarski, and T. Villemur. "Design and Realization of a Synchronous Cooperative Shared Electronic Board." In Embedded System Applications, 245–61. Boston, MA: Springer US, 1997. http://dx.doi.org/10.1007/978-1-4757-2574-2_17.
Full textVega-Pérez, J., S. Vega-Pérez, and L. Castañeda-Aviña. "Design of Electronic Control Board to Obtain the Photovoltaic Module Power Voltage Curve as Temperature Function." In Multibody Mechatronic Systems, 241–48. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-09858-6_23.
Full textZanetto, Francesco. "Low-Noise Mixed-Signal Electronics for Closed-Loop Control of Complex Photonic Circuits." In Special Topics in Information Technology, 55–64. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-85918-3_5.
Full textGjøsteen, Kristian, Thomas Haines, and Morten Rotvold Solberg. "Coercion Mitigation for Voting Systems with Trackers: A Selene Case Study." In Electronic Voting, 69–86. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-43756-4_5.
Full textShina, Sammy G. "Design For Manufacture of Printed Circuit Boards." In Concurrent Engineering and Design for Manufacture of Electronics Products, 235–57. Boston, MA: Springer US, 1991. http://dx.doi.org/10.1007/978-1-4684-6518-1_10.
Full textConference papers on the topic "Electronic board design"
Heng, Charlie A. S., and Robert K. L. Gay. "Design for Manufacturability: Cost Analysis of Electronic Circuit Board Assembly." In ASME 1991 Design Technical Conferences. American Society of Mechanical Engineers, 1991. http://dx.doi.org/10.1115/detc1991-0070.
Full textPalmieri, Giacomo, Marco Marconi, David Corinaldi, Michele Germani, and Massimo Callegari. "Automated Disassembly of Electronic Components: Feasibility and Technical Implementation." In ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/detc2018-85302.
Full textLazaro, Jesus, Laura Burgos, Leire Muguira, Armando Astarloa, and Jaime Jimenez. "Electronic control board for student Rocket." In 2020 XXXV Conference on Design of Circuits and Integrated Systems (DCIS). IEEE, 2020. http://dx.doi.org/10.1109/dcis51330.2020.9268644.
Full textKhalilollahi, Amir, Russell L. Warley, and Oladipo Onipede. "Thermal Reliability Design and Optimization for Multilayer Composite Electronic Boards." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-82560.
Full textYusoff, Wan Sallha, Suraiya Ibrahim, Fazida Karim, Mohd Fairuz Md Salleh, and Teo Boon Li. "The moderating role of electronic voting system on board ownership and board effectiveness." In PROCEEDINGS OF GREEN DESIGN AND MANUFACTURE 2020. AIP Publishing, 2021. http://dx.doi.org/10.1063/5.0044590.
Full textLu, Albert Chee W., Wei Fan, Lai L. Wai, Toshiro Yamazaki, Jacinto Jun Jarcia, and Kim H. Chin. "Design Optimization of Power Distribution Design Networks Using Embedded Passive Technology." In ASME 2003 International Electronic Packaging Technical Conference and Exhibition. ASMEDC, 2003. http://dx.doi.org/10.1115/ipack2003-35221.
Full textWang, Hongfang, and Mei Zhao. "Studies on the Dynamic Behavior of a Printed Circuit Board." In ASME 1999 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/detc99/vib-8126.
Full textFidan, Ismail, Russell P. Kraft, and Stephen J. Derby. "Design and Implementation of a Flexible Intelligent Electronics Remanufacturing System." In ASME 1999 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/imece1999-0921.
Full textBogula, N. Yu, S. F. Chermoshencev, and I. V. Suzdaltsev. "Evolutionary algorithms for digital electronic printed circuit board design." In 2015 XVIII International Conference on Soft Computing and Measurements (SCM). IEEE, 2015. http://dx.doi.org/10.1109/scm.2015.7190440.
Full textDake, Timothy J., Joseph Majdalani, and Susheela Narasimhan. "Design Optimization of a Router Board Using Computational Fluid Dynamics." In ASME 2003 International Electronic Packaging Technical Conference and Exhibition. ASMEDC, 2003. http://dx.doi.org/10.1115/ipack2003-35338.
Full textReports on the topic "Electronic board design"
Hardin, D. J., H. E. Schoeppe, R. L. Franssen, and G. W. Kirchner. Printed wiring board design and manufacture in Electronic Instrumentation Department 8450. Office of Scientific and Technical Information (OSTI), May 1991. http://dx.doi.org/10.2172/6111327.
Full textBelue, Jeffrey E., Frederick A. Hanser, and Paul R. Morel. Design, Develop, Fabricate, Test and Deliver a Protoflight Medium-to-High Energy Electron Detector for Integration into a Small On-board Diagnostic Sensors Package. Fort Belvoir, VA: Defense Technical Information Center, June 1997. http://dx.doi.org/10.21236/ada328471.
Full textBelue, Jeffrey E., Frederick A. Hanser, and Paul R. Morel. Design, Develop, Fabricate, Test and Deliver a Protoflight Medium-To-High-Energy Electron Detector for Integration into a Small On-Board Diagnostic Sensors Package. Fort Belvoir, VA: Defense Technical Information Center, April 2003. http://dx.doi.org/10.21236/ada416913.
Full textBelue, Jefferey E., Frederick A. Hanser, and Paul R. Morel. Design, Develop, Fabricate, Test and Deliver a Protoflight Medium-to-High-Energy Electron Detector for Integration into a Small On-Board Diagnostic Sensors Package. Fort Belvoir, VA: Defense Technical Information Center, November 1997. http://dx.doi.org/10.21236/ada339588.
Full textPayment Systems Report - June of 2021. Banco de la República, February 2022. http://dx.doi.org/10.32468/rept-sist-pag.eng.2021.
Full text