Relevant bibliographies by topics / ELECTROCONDUCTIVITY

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers
  5. Reports

Academic literature on the topic 'ELECTROCONDUCTIVITY'

Author: Grafiati
Published: 26 June 2021
Last updated: 31 May 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'ELECTROCONDUCTIVITY.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "ELECTROCONDUCTIVITY"

1

Londar, S. L. "Electroconductivity of Ca5Ga6O14 crystals." Physica Status Solidi (a) 146, no. 2 (December 16, 1994): 765–70. http://dx.doi.org/10.1002/pssa.2211460221.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ilicheva, N. S., N. K. Kitaeva, V. R. Duflot, and V. I. Kabanova. "Synthesis and Properties of Electroconductive Polymeric Composite Material Based on Polypyrrole." ISRN Polymer Science 2012 (February 29, 2012): 1–7. http://dx.doi.org/10.5402/2012/320316.

Full text
Abstract:
A technique is proposed for obtaining electroconductive, mechanically strong, and elastic composite material based on polypyrrole and hydrophilized polyethylene. The relationship is established between the process parameters and properties of the composite material such as electroconductivity and mechanical strength. Several methods are considered in the view of increasing electroconductivity of the material. Physical and mechanical properties of the composite material are investigated.
APA, Harvard, Vancouver, ISO, and other styles
3

Sakai, Takenobu, Tomohiko Gushiken, Jun Koyanagi, Rolando Rios-Soberanis, Tomoki Masuko, Satoshi Matsushima, Satoshi Kobayashi, and Satoru Yoneyama. "Effect of Viscoelastic Behavior on Electroconductivity of Recycled Activated Carbon Composites." Applied Mechanics and Materials 70 (August 2011): 231–36. http://dx.doi.org/10.4028/www.scientific.net/amm.70.231.

Full text
Abstract:
In the Waterworks Bureau, the activated carbon has been used for filtering water. After the life service of activated carbon, it is normally disposed. This work focuses on the processing of a composite material in order to recycle these wasted carbon particles. These activated carbons were used for the filler of composite materials, and a composite with carbon contents of 10% ~ 60% was manufactured and characterized. They exhibited electroconductive behavior because of the carbon particles used as fillers. The electroconductivity have an intimate relationship with the strain of the material. However, because of the composite viscoelasticity, the electroconductivity presented changes by their stress relaxation behavior with the same strain. In this study, it was revealed the relationship between the viscoelasticity and the electroconductivity of recycled activated carbon composites.
APA, Harvard, Vancouver, ISO, and other styles
4

Sorokin, N. I., and E. I. Ardashnikova. "Electroconductivity of Oxyfluoride 3NdOF · KF." Russian Journal of Electrochemistry 40, no. 5 (May 2004): 578–79. http://dx.doi.org/10.1023/b:ruel.0000027631.56744.54.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Savic, Slobodan, and Branko Obrovic. "The influence of variation of electroconductivity on ionized gas flow in the boundary layer along a porous wall." Theoretical and Applied Mechanics 33, no. 2 (2006): 149–79. http://dx.doi.org/10.2298/tam0602149s.

Full text
Abstract:
This paper investigates ionized gas flow in the boundary layer when its electroconductivity is varied. The flow is planar and the contour is porous. At first, it is assumed that the ionized gas electroconductivity ? depends only on the longitudinal variable. Then we adopt that it is a function of the ratio of the longitudinal velocity and the velocity at the outer edge of the boundary layer. For both electroconductivity variation laws, by application of the general similarity method, the governing boundary layer equations are brought to a generalized form and numerically solved in a four-parametric three times localized approximation. Based on many tabular solutions, we have shown diagrams of the most important nondimensional values and characteristic boundary layer functions for both of the assumed laws. Finally, some conclusions about influence of certain physical values on ionized gas flow in the boundary layer have been drawn. .
APA, Harvard, Vancouver, ISO, and other styles
6

ODINAEV, S., and I. ODJIMAMADOV. "THE RELAXATION THEORY OF ELECTROELASTICITY AND DIELECTRIC PROPERTIES OF IONIC LIQUIDS." Modern Physics Letters B 15, no. 09n10 (April 30, 2001): 285–90. http://dx.doi.org/10.1142/s021798490100177x.

Full text
Abstract:
An analytic dynamic coefficient of electroconductivity σ(ω) and electroelasticity modulus ε(ω) for ionic liquids is obtained from the kinetic equations for one- and two-particle distribution functions. These expressions include both structural and translational relaxation processes which proceed in the ionic liquids. An asymptotic behavior of σ(ω) and corresponding ∊(ω) at low and high frequencies is considered. It is shown that the obtained results for electroconductivity allow us to investigate dielectric properties of ionic liquids.
APA, Harvard, Vancouver, ISO, and other styles
7

Liu, Hongbo, Ben Li, Jing Xue, Jiayu Hu, and Jing Zhang. "Mechanical and Electroconductivity Properties of Graphite Tailings Concrete." Advances in Materials Science and Engineering 2020 (April 4, 2020): 1–20. http://dx.doi.org/10.1155/2020/9385097.

Full text
Abstract:
This paper investigated the mechanical and electroconductivity properties of graphite tailings concrete, in which the graphite tailings are replaced as sand. The results showed that the concentration of graphite tailings has an important influence on the mechanical, electroconductivity, and material properties of concrete. Finally, a new model for calculating the relationship between compressive strength and electrical resistivity based on the grey correlation method was obtained for providing a theoretical basis for building green and intelligent building materials.
APA, Harvard, Vancouver, ISO, and other styles
8

Ershov, A. P., N. P. Satonkina, and G. M. Ivanov. "Electroconductivity profiles in dense high explosives." Russian Journal of Physical Chemistry B 1, no. 6 (December 2007): 588–99. http://dx.doi.org/10.1134/s1990793107060139.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Fujii, Masak, and Tatsuo Wakayama. "4834910 Coating agent for imparting electroconductivity." Carbon 28, no. 1 (1990): IV. http://dx.doi.org/10.1016/0008-6223(90)90148-r.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Surzhikov, A. P., T. S. Frangulyan, S. A. Ghyngazov, E. N. Lisenko, and O. V. Galtseva. "Investigation of electroconductivity of lithium pentaferrite." Russian Physics Journal 49, no. 5 (May 2006): 506–10. http://dx.doi.org/10.1007/s11182-006-0133-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "ELECTROCONDUCTIVITY"

1

Ichkitidze, L. P., V. M. Podgaetsky, S. V. Selishchev, E. V. Blagov, V. A. Galperin, and Yu P. Shaman. "Laser Stimulation the Electroconductivity of Composite Layers with Multiwalled Carbon Nanotubes." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35631.

Full text
Abstract:
Electroconductivity laser stimulation (irradiation) of composite layers based on carboxymethyl cellu-lose (CMC) and multiwalled carbon nanotubes (MWCNT) has been researched. The layers were deposited on the following substrates: flexible such as polyimide, polyester, aluminum foil paper, cotton fabric and shop paper (~80 g/m2]; hard substrates such as Si/SiΟ2 and cover glass. The conductivity of layers with thickness 0.5 10 μm was improved more on 500 % /(W/cm2) after laser stimulation (wavelength 970 nm, emission specific power PS~0.051 W/cm2, concentration C~0.05 wt.% MWCNT). When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/35631
APA, Harvard, Vancouver, ISO, and other styles
2

Rethwisch, Michael D., Michael D. Kruse, Roy Leivas, Jack Watson, and Michael Sheedy. "Effects of High Electroconductivity Field Conditions on Production of Six Alfalfa Varieties on the Colorado River Indian Tribes Reservation." College of Agriculture, University of Arizona (Tucson, AZ), 2000. http://hdl.handle.net/10150/204058.

Full text
Abstract:
Five alfalfa varieties were planted and grown under grower conditions on a field section that had high conductivity, while two varieties were planted and grown on a section of the same field much less affected. CUF 101, the variety grown in both areas, was the highest yielding variety in both area. Reduction in CUF 101 hay yield due to high conductivity was approximately one ton/acre in the first year of production, with a large amount of this noted in the first cutting. Yield reductions of CUF 101 due to field area and associated electroconductivity were greater the second year, with an average of 0.29 tons/acre/cutting. Total yield difference for CUF 101 was 1.72 tons/acre for the eight harvests for which data were available. Yield differences between the areas was greatest in the early spring and late fall of the first harvest year, with differences not noted in the June cutting; in year two yield differences were approximately 37% for each cutting. Salado was the second highest yielding variety in the high electroconductivity area in 1998, and equaled CUF 101 in yield from this area in 1999. Sal-T-96 and Leivas Best yielded less than 90% of CUF 101. Sal-T-96 also had the greatest number of weeds, due in part to very slow germination and fewer plants per acre compared with other varieties.
APA, Harvard, Vancouver, ISO, and other styles
3

Rethwisch, Michael D., Michael D. Kruse, Roy Leivas, Jack Watson, and Michael Sheedy. "First Year Effects of High Electroconductivity Field Conditions on Production of Six Alfalfa Varieties on the Colorado River Indian Tribes Reservation." College of Agriculture, University of Arizona (Tucson, AZ), 1999. http://hdl.handle.net/10150/205152.

Full text
Abstract:
Five alfalfa varieties were planted and grown under grower conditions on a field section that had high conductivity, while two varieties were planted and grown on a normal field area. CUF 101, the variety grown in both areas, was the highest yielding variety in both area. Reduction in CUF 101 hay yield due to high conductivity was approximately one ton/acre in the first year of production, with a large amount of this noted in the first cutting. Yield differences between the areas was greatest in the early spring and late fall, with differences not noted in the June cutting. Salado was the second highest yielding variety in the high electroconductivity area, with Sal-T-96 and Leivas Best yielding less than 90% of CUF 101. Sal-T-96 also had the greatest number of weeds, due in part to very slow germination and fewer plants per acre compared with other varieties.
APA, Harvard, Vancouver, ISO, and other styles
4

Журило, Алла Григорівна. "Технологія одержання якісних безперервнолитих заготовок дрібного перерізу із вторинної міді з застосуванням розробленого процесу її виплавки." Thesis, Фізико-технологічний інститут металів та сплавів НАН України, 2003. http://repository.kpi.kharkov.ua/handle/KhPI-Press/38025.

Full text
Abstract:
Дисертація на здобуття наукового ступеня кандидата технічних наук за спеціальністю 05. 16. 04 – Ливарне виробництво. - Фізико-технологічний інститут металів та сплавів НАН України, Київ, 2003. Дисертація присвячена розробці параметрів плавки та обробки розплаву вторинної міді з метою отримання методом безперервного литва заготовок з електропровідністю 55 Сименсів та вище. Досліджено вплив вмісту кисню на властивості вторинної міді, що дозволило визначити залежності електропровідності, межі міцності та відносного подовження при вмісту кисню 0,01 – 0,2 %. Визначено збільшення вмісту кисню на різних етапах плавки металу в індукційній печі під час плавки та обробки розплаву вторинної міді. В дисертації запропоновано технологію отримання кабельно – провідникової продукції з вторинної міді за допомогою горизонтального безперервного лиття, що містить чотири етапи: 1. Плавка вторинної міді з відкритим дзеркалом металу (з вмістом кисню 0,15 - 0,2 %). Це дозволяє рафінувати метал від домішок та знижувати рівноважний вміст водню до меж, що не приводять до з’явлення пор. 2. Наведення флюсу: сода, бура, кварцовий пісок (1:4,5:4,5) для припинення окислення міді, вміст кисню при цьому знижується до 0,05 %. 3. Обробка розплаву міді аргоном та розкислення лігатурою “літій - кальцій” (по 50 % кожного), що дає змогу отримати виливки з міді, щільність яких 8940 кг/м3, та електропровідність більш, ніж 58 Сименсів. Витрати аргону 0,7 - 0,8 м3/т розплаву. 4. Горизонтальне безперервне литво з такими параметрами: - швидкість лиття – 0,48 м/хв; - крок витягування – 40 мм; - тривалість витягування кожного кроку – 4 – 6 с; - тривалість паузи – 5 - 6 с. В результаті розробки нової технології скасовано ряд операцій існуючої технології, що зв’язані з литтям вайербарсів, їх фрезеруванням, прокаткою, термообробкою, тощо. Основні результати роботи знайшли промислове впровадження у плавці та обробці вторинної міді.
Thesis for submitting a Technical science candidate degree on specialty 05. 16. 04 – Foundry production.- Physico-technological Institute of Metals and Alloys of NAS of Ukraine, Kiyv, 2003. This thesis describes the development of melting and treatment for the smelt of secondary copper for the manufacturing bars with 55 Siemens conductance and more using the horizontal continuous casting. The thesis proposes a new technology for the production of a cable-conductor product from secondary copper based on horizontal continuous casting that consists of 4 stages namely: - melting secondary copper with an exposed mirror of metal (copper includes less than 0,15% of oxygen); - flux melting metal (flux consists of: soda, quarts sand, borax (1:4,5:4,5)), the results of copper includes less than 0,05% of oxygen; - the treatment of molten copper by argon and then deoxidizing by an alloy of “lithium-calcium” composition (50% per lach), the results of copper have density of 8940 kg/m3, 58 Siemens electroconductivity (then flow raze of argon then being 0,8 m3/t copper); - horizontal continuous casting with the following parameters: - velocity of casting – 0,48 m/min; - space for drawing – 40 mm; - time for drawing – 4 – 6 s; - time for pause – 5 - 6 s; - the angle of mould inclination to horizon – 15 O. The horizontal continuous casting has been shown to offer many advantages over wirebarce casting. The basic results of the work have found industrial implementation into the melting and treatment of secondary copper.
APA, Harvard, Vancouver, ISO, and other styles
5

Максимчук, Т. Ю., and T. Yu Maksimchuk. "Кристаллическая структура и физико-химические свойства сложнооксидных фаз Nd1.6Ca0.4Ni1-yCuyO4+δ : магистерская диссертация." Master's thesis, б. и, 2021. http://hdl.handle.net/10995/99984.

Full text
Abstract:
Работа содержит 71 страницу, 52 рисунка, 8 таблиц, 73 наименования в списке литературы. Ключевые слова: ТВЕРДООКСИДНЫЙ ТОПЛИВНЫЙ ЭЛЕМЕНТ, КАТОДНЫЙ МАТЕРИАЛ, СТРУКТУРА РАДДЛЕСДЕНА-ПОППЕРА, ТЕРМИЧЕСКОЕ РАСШИРЕНИЕ, ЭЛЕКТРОПРОВОДНОСТЬ, ХИМИЧЕСКАЯ СОВМЕСТИМОСТЬ. Методом пиролиза глицерин-нитратных композиций проведен синтез сложных оксидов Nd1.6Ca0.4Ni1-yCuyO4+δ (y = 0.0-0.4). Методом рентгеновской дифракции определен фазовый состав порошков Nd1.6Ca0.4Ni1 yCuyO4+δ (y = 0.0-0.4) (ДРОН-6). Методом Ритвелда при использовании программного пакета FullProf Suite уточнены кристаллоструктурные параметры Nd1.6Ca0.4Ni1-yCuyO4+δ (y = 0.0-0.3) при 25 С. Проведены высокотемпературные рентгеновские исследования порошков Nd1.6Ca0.4Ni1-yCuyO4+δ (y = 0.0 - 0.3). Методами термогравиметрии (NETZSCH STA 449F3) и окислительно-восстановительного (потенциометрического) титрования (Аквилон АТП-02) проведено определение абсолютного содержания кислорода в образцах Nd1.6Ca0.4Ni1 yCuyO4+δ (y = 0.0-0.3) на воздухе. Методом дилатометрии (Netzsch DIL 402C) исследовано термическое расширение спеченных образцов Nd1.6Ca0.4Ni1-yCuyO4+δ (y = 0.0-0.3). Из наклона экспериментальных зависимостей относительного удлинения образцов рассчитаны изобарические линейные коэффициенты термического расширения Nd1.6Ca0.4Ni1-yCuyO4+δ (y = 0.0-0.3). Четырех-зондовым методом на постоянном токе на воздухе с использованием автоматической системы Zirconia-318 получены температурные зависимости проводимости спеченных образцов Nd1.6Ca0.4Ni1-yCuyO4+δ (y = 0.0-0.3). Проведены исследования химической совместимости Nd1.6Ca0.4Ni1-yCuyO4+δ (y = 0.0; 0.2; 0.4) с оксидными материалами для традиционных электролитов ТОТЭ. На анализаторе дисперсности SALD-7101 Shimadzu методом лазерного светорассеяния выполнено определение распределения частиц по размерам в порошках Nd1.6Cа0.4Ni1-yCuyO4+δ (y = 0.0-0.4). Величины удельной поверхности Nd1.6Cа0.4Ni1-yCuyO4+δ (y = 0.0-0.4) оценивали методом тепловой десорбции азота на автоматическом анализаторе поверхности и пористости SoftSorbi-II ver.1.0. Определение коэффициента диффузии ионов кислорода проводили методом температурно-программируемого изотопного обмена. Электрохимическая активность катодных материалов Nd1.6Cа0.4Ni1-yCuyO4+δ (y = 0.0; 0.1; 0.3) исследована методом импедансной спектроскопии с помощью потенциостата SI 1260 и электрохимического интерфейса SI 1287 (Solartron Industries Inc.). На основе полученных данных сделан вывод о перспективности оксидных материалов Nd1.6Ca0.4Ni1-yCuyO4+δ (y = 0.0 0.4) в качестве катодных материалов для среднетемпературных ТОТЭ.
Present work contains 71 pages, 52 figures, 8 tables, 73 references in the literature list. Keywords: SOLID OXIDE FUEL CELLS, CATHODE, RUDDLESDEN-POPPER STRUCTURE, THERMAL EXPANSION, ELECTROCONDUCTIVITY, CHEMICAL COMPATIBILITY. Synthesis of the Nd1.6Ca0.4Ni1-yCuyO4+δ (y = 0.0-0.4) complex oxides was carried out by the glycerol-nitrate compositions pyrolysis. Phase composition of the Nd1.6Ca0.4Ni1-yCuyO4+δ (y = 0.0-0.4) powders was determined by the X-ray diffraction (DRON-6). The crystal structure parameters of the Nd1.6Ca0.4Ni1-yCuyO4+δ (y = 0.0-0.4) oxides at 25 °C were refined by the Rietveld method using the FullProf Suite software package. High-temperature X-ray studies were performed on the Nd1.6Ca0.4Ni1-yCuyO4+δ (y = 0.0-0.3) powders. The thermogravimetry (NETZSCH STA 449F3) and redox titration (potentiometric) methods (Aquilon ATP-02) were used for the determination of an absolute oxygen content in the Nd1.6Ca0.4Ni1-yCuyO4+δ (y = 0.0-0.4) samples in air. Thermal expansion of the compact Nd1.6Ca0.4Ni1-yCuyO4+δ (y = 0.0-0.4) samples were studied using the dilatometry (Netzsch DIL 402C) method. The isobaric linear coefficients of the Nd1.6Ca0.4Ni1-yCuyO4+δ (y = 0.0-0.4) thermal expansion were calculated from linearization of the experimental dependencies of samples’ relative elongation. The temperature dependencies of the Nd1.6Ca0.4Ni1-yCuyO4+δ (y = 0.0-0.4) compact samples’ conductivity were obtained using the four-probe method at direct current in air with automatic system Zirconia-318. Chemical compatibility of the Nd1.6Ca0.4Ni1-yCuyO4+δ (y = 0.0; 0.2; 0.4) with electrolytes oxide materials for solid oxide fuel cells (SOFC) has been studied. Particle size distribution in the Nd1.6Ca0.4Ni1-yCuyO4+δ (y = 0.0-0.4) powders was determined by laser light scattering using a SALD-7101 Shimadzu dispersion analyzer. The values of the Nd1.6Ca0.4Ni1-yCuyO4+δ (y = 0.0-0.4) specific surface were estimated by the method of nitrogen thermal desorption on an automatic surface and porosity analyzer SoftSorbi-II ver.1.0. The oxygen ion diffusion coefficients were determined by temperature programmed isotope exchange of oxygen. Electrochemical activity of the Nd1.6Ca0.4Ni1-yCuyO4+δ (y = 0.0-0.4) cathode materials was investigated by impedance spectroscopy using a SI 1260 potentiostat and SI 1287 electrochemical interface (Solartron Industries Inc.). Based on the obtained data, it could be concluded that the Nd1.6Ca0.4Ni1-yCuyO4+δ oxide materials are promising as cathode materials for intermediate-temperature SOFC’s.
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "ELECTROCONDUCTIVITY"

1

Zhang, Qingguo. "Electroconductivity of Ionic Liquids." In Encyclopedia of Ionic Liquids, 1–7. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-10-6739-6_110-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Borisova, V. P., T. A. Vasilieva, S. L. Kostuchenko, and E. B. Fainberg. "On Deep Electroconductivity of Tobol-Ishim Interfluve." In Springer Proceedings in Earth and Environmental Sciences, 249–56. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-319-97670-9_29.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Diezma Iglesias, Belén. "Soil sensors." In Manuali – Scienze Tecnologiche, 15. Florence: Firenze University Press, 2020. http://dx.doi.org/10.36253/978-88-5518-044-3.15.

Full text
Abstract:
Sensors for estimation of soil properties will be explained in this topic. Principles about soil sensors based on different technologies (electroconductivity, magnetic response, NIR optical signals, mechanical resistance…) will be presented. Relation between these sensors and soil attributes related to fertility are important in order to extract relevant agronomical information out of soil maps.
APA, Harvard, Vancouver, ISO, and other styles
4

Kaneko, Hiroaki, Yoshiaki Miura, Motozo Kaneko, and Seiichi Tokura. "Photo-Induced Electroconductivity by Hematoprophyrin IX Doped Chitosan Films." In Advances in Chitin and Chitosan, 586–93. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-5942-5_67.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Vasenev, Viacheslav, Irina Veretelnikova, Inna Brianskaia, Sofiya Demina, Olga Romzaykina, Bakhtiyor Pulatov, and Alim Pulatov. "Soil Electroconductivity as a Proxy to Monitor the Desertification in the Hungry Steppe (Uzbekistan)." In Springer Geography, 125–32. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-16091-3_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

"Electroconductivity." In Encyclopedia of Thermal Stresses, 1214. Dordrecht: Springer Netherlands, 2014. http://dx.doi.org/10.1007/978-94-007-2739-7_100185.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Changa, Taity, Jane Asiyo Okalebo, and Shaokun Wang. "Spatio-Temporal Dynamics of Soil Microbial Communities in a Pasture: A Case Study of Bromus inermis Pasture in Eastern Nebraska." In Agrometeorology [Working Title]. IntechOpen, 2020. http://dx.doi.org/10.5772/intechopen.93548.

Full text
Abstract:
Today’s intensified agricultural production is characterized by crop and pasture monocultures, which have a significant impact on soil microbial diversity and abundance. This chapter provides a case study in which the relative importance of brome grass (Bromus inermis) monoculture pasture versus intra-site microhabitat diversity is explored using fatty acid methyl ester (FAMEs) assay to delineate the presence and abundance of several classes of soil microbes instrumental in soil nutrient cycling, plant health, plant organic matter decomposition, and soil stabilization. The chapter explores spatio-temporal variability of bacteria, actinomycetes, saprophytes, mycorrhizae, and micro-eukaryotes over two durations (summer and fall) collected using two distinct sampling methods. One of the methods is commonly employed, namely, transect-based, while the other is informed by soil electroconductivity measurements conducted over the entire pasture site from a previous survey.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "ELECTROCONDUCTIVITY"

1

BOLINCHES, A. S., E. KLYATSKINA, E. F. S. LÓPEZ, A. ZHOLNIN, and V. STOLYAROV. "ELECTROCONDUCTIVITY OF AL2O3/GRAPHENE NANOCOMPOSITE PROCESSED BY SPS TECHNIQUE." In СИНТЕЗ И КОНСОЛИДАЦИЯ ПОРОШКОВЫХ МАТЕРИАЛОВ. TORUS PRESS, 2018. http://dx.doi.org/10.30826/scpm2018005.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lyshenjuk, K. P., Felix N. Marchevskii, H. Ponat, and Vladimir L. Strizshevskii. "Nonlinear surface polaritons under conditions of surface electroconductivity availability." In XIV International Conference on Coherent and Nonlinear Optics, edited by Nikolay N. Rosanov. SPIE, 1992. http://dx.doi.org/10.1117/12.131797.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Medvids, Arthur, and V. Frishfelds. "Photoconductivity of a semiconductor with anisotropic electroconductivity in a nonhomogeneous electric field." In International Conference on Advanced Optical Materials and Devices, edited by Edgar A. Silinsh, Arthur Medvids, Andrejs R. Lusis, and Andris O. Ozols. SPIE, 1997. http://dx.doi.org/10.1117/12.266819.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lebedev, Y. A., L. A. Kosykh, and A. N. Chuvyrov. "The electroconductivity and electron spin resonance in doped natural /spl pi/-conjugated polymers." In International Conference on Science and Technology of Synthetic Metals. IEEE, 1994. http://dx.doi.org/10.1109/stsm.1994.834718.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Abramov, I. I., A. L. Danilyuk, G. V. Litvinovich, G. V. Sokol, E. A. Burova, V. V. Uglov, and N. N. Cherenda. "Electroconductivity and structural-phase changes of anodic aluminum oxide implanted by titanium and molybdenum." In 1999 9th International Crimean Microwave Conference 'Microwave and Telecommunication Technology'. Conference Proceedings. IEEE, 1999. http://dx.doi.org/10.1109/crmico.1999.815241.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Arakelian, S., A. Kucherik, S. Kutrovskaya, and A. Osipov. "The topological electroconductivity control in the semiconductor/metal/carbon unit by laser-induced nanogranular structures." In 2017 Progress In Electromagnetics Research Symposium - Spring (PIERS). IEEE, 2017. http://dx.doi.org/10.1109/piers.2017.8262347.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kasianenko, E. M., and A. I. Omelchenko. "Electroconductivity of cartilage in the temperature range from -10°C to 50°C with laser heating." In 2020 International Conference Laser Optics (ICLO). IEEE, 2020. http://dx.doi.org/10.1109/iclo48556.2020.9285615.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kuzanyan, A. S., V. A. Petrosyan, V. T. Tatoyan, V. S. Kuzanyan, V. R. Nikoghosyan, V. H. Vardanyan, S. Kh Pilosyan, and A. M. Gulian. "Investigation of microstructure, composition and electroconductivity of CuO x ceramics before and after influence of laser radiation." In International Conference on Laser Physics 2010, edited by Aram V. Papoyan. SPIE, 2010. http://dx.doi.org/10.1117/12.891714.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Burge, Scott R. "Automated Analysis of Trichloroethene and Chloroform." In ASME 2003 9th International Conference on Radioactive Waste Management and Environmental Remediation. ASMEDC, 2003. http://dx.doi.org/10.1115/icem2003-4648.

Full text
Abstract:
Chloroform and trichloroethene (TCE) are two organic contaminants commonly encountered in ground water. TCE, formerly a common cleaning solvent, is usually associated with contaminated aquifers. Chloroform is usually associated with the chlorination of municipal water. The remediation level for TCE in aquifers is typically 5 ppb, therefore, the analytical method employed for monitoring these analytes must be capable of detecting and quantifying the analytes in the low ppb concentration range. The most common analytical methodology for the determination of TCE or chloroform in water is a purge and trap technique for sample introduction into a gas chromatographic system equipped with electroconductivity or mass spectroscopy detector. The instrumentation has a method limit of detection (LOD) of less than 0.5 ppb for TCE and chloroform, however, the expense, size and complexity of the gas chromatographic techniques limit its use outside the laboratory environment. An alternative to the gas chromatographic method for the analysis of select volatile chlorinated compounds in the low concentration range is an analytical instrument based on a halocarbon-specific optrode. The principle of detection is a quantitative, irreversible chemical reaction (modified Fujiwara reaction) that forms visible light-absorbing products. The operational basis of the optrode is the measure of the time history of the development of the colored (red) product formed by the reaction of the target analytes. The optrode has the selectivity and sensitivity for monitoring TCE and chloroform at the low ppb concentration range in the presence of other volatile chlorinated contaminants. The low-power requirements and simplicity of design make it a good choice for remote operations. This paper presents the analytical results (January 2002, to December 2002) of a panel-mounted instrument used to monitor the influent and effluent water of a TCE treatment facility located in Scottsdale, Arizona, and the analytical results of a well-mounted instrument used to monitor ground water (May 2002, to August 2002) at Edwards Air Force Base, California.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "ELECTROCONDUCTIVITY"

1

Yusun, Lu, Li Hua, Han Xiaowen, and Chen Wenying. Evaluation of Electroconductivity of Two Surface Paints for Spacecraft. Fort Belvoir, VA: Defense Technical Information Center, November 1993. http://dx.doi.org/10.21236/ada273063.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'ELECTROCONDUCTIVITY' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography