Academic literature on the topic 'Electrochemical technique'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Electrochemical technique.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Electrochemical technique"
Altufaily, Mohammad Abid Muslim Abdullah, and Ahmed Muslem Hashim Mohammad. "Modeling and Improvement of Aqueous Pollutants Removal Using Electrochemical Technique." Journal of Advanced Research in Dynamical and Control Systems 11, no. 12 (December 20, 2019): 137–50. http://dx.doi.org/10.5373/jardcs/v11i12/20193222.
Full textNatarj, Shubha H., Venkatesha T. Venkatarangaiah, and Anantha N. Subbarao. "Electrochemical surface modification technique to impede mild steel corrosion using Perfluorooctanoic Acid." Journal of Electrochemical Science and Engineering 5, no. 4 (February 16, 2016): 247. http://dx.doi.org/10.5599/jese.211.
Full textUnwin, P. R., J. V. Macpherson, M. A. Beeston, N. J. Evans, D. Littlewood, and N. P. Hughes. "New Electrochemical Techniques for Probing Phase Transfer Dynamics at Dental Interfaces in Vitro." Advances in Dental Research 11, no. 4 (November 1997): 548–59. http://dx.doi.org/10.1177/08959374970110042401.
Full textMinhai, Huang, Ye Mingku, and Tian Zhaowu. "POLYACETYLENE FILM FORMED BY ELECTROCHEMICAL TECHNIQUE." Acta Physico-Chimica Sinica 1, no. 02 (1985): 193–95. http://dx.doi.org/10.3866/pku.whxb19850211.
Full textMocák, Ján, Michal Németh, Mieczyslaw Lapkowski, and Jerzy W. Strojek. "Spectrocoulometry – a new spectro-electrochemical technique." Collection of Czechoslovak Chemical Communications 52, no. 6 (1987): 1386–96. http://dx.doi.org/10.1135/cccc19871386.
Full textSingh, Ravi Chand, Manwinder Singh, and H. S. Virk. "Electrochemical etching technique for neutron dosimetry." Indian Journal of Physics 83, no. 6 (June 2009): 827–32. http://dx.doi.org/10.1007/s12648-009-0035-x.
Full textCao, Xian Long, Yi De Xiao, Hong Da Deng, Peng Jun Cao, and Bi Jia. "Evaluation of Atmospheric Corrosivity by ACM Technique." Materials Science Forum 610-613 (January 2009): 3–8. http://dx.doi.org/10.4028/www.scientific.net/msf.610-613.3.
Full textHoneychurch. "Review of Electroanalytical-Based Approaches for the Determination of Benzodiazepines." Biosensors 9, no. 4 (November 2, 2019): 130. http://dx.doi.org/10.3390/bios9040130.
Full textTran, Hoang Vinh, Hue Thi Minh Dang, Luyen Thi Tran, Chau Van Tran, and Chinh Dang Huynh. "Metal-Organic Framework MIL-53(Fe): Synthesis, Electrochemical Characterization, and Application in Development of a Novel and Sensitive Electrochemical Sensor for Detection of Cadmium Ions in Aqueous Solutions." Advances in Polymer Technology 2020 (October 6, 2020): 1–10. http://dx.doi.org/10.1155/2020/6279278.
Full textKrawiec, Halina. "Application of the Electrochemical Microcell Technique in Solid State Surface Analysis." Solid State Phenomena 227 (January 2015): 549–52. http://dx.doi.org/10.4028/www.scientific.net/ssp.227.549.
Full textDissertations / Theses on the topic "Electrochemical technique"
Dogan, Bahadir. "Synthesis And Characterization Of Semiconductor Nanowires Via Electrochemical Technique." Master's thesis, METU, 2009. http://etd.lib.metu.edu.tr/upload/3/12611335/index.pdf.
Full textZou, Feng. "Localized electrochemical impedance technique for the study of corrosion processes /." Stockholm : Tekniska högsk, 1998. http://www.lib.kth.se/abs98/zou1218.pdf.
Full textTaylor, Malcolm G. "Measurement of organic substances in the gas phase using on-line electrochemical techniques." Thesis, Loughborough University, 1988. https://dspace.lboro.ac.uk/2134/12597.
Full textTeh, Tong H. "A novel electrochemical technique for mineral scale coverage and scaling tendency quantification." Thesis, Heriot-Watt University, 2011. http://hdl.handle.net/10399/2488.
Full textToura, Hanae. "Elaboration and characterization by electrochemical technique CZTS thin layers for photovoltaic application." Doctoral thesis, Universitat Politècnica de València, 2020. http://hdl.handle.net/10251/154334.
Full text[ES] El aumento de las necesidades energéticas, particularmente en términos de protección del medio ambiente, ha estimulado en gran medida la investigación en el campo de la conversión fotovoltaica en los últimos años. La radiación solar proporciona un recurso excelente para producir electricidad limpia y sostenible sin contaminación tóxica o calentamiento global, pero en términos de alta demanda de energía eléctrica, así como la toxicidad o escasez de componentes que constituyen las células solares, esta tecnología de transformación solar todavía es algo limitada. En consecuencia estos parámetros constituyen las principales preocupaciones ambientales que rodean a la industria fotovoltaica. El compuesto Cu2ZnSnS4 (CZTS) puede considerarse como uno de los materiales absorbentes más prometedores para las células solares de película delgada de bajo costo. La abundancia y la no toxicidad de los elementos constitutivos de este prometedor material es el tema de este trabajo. Este objetivo nos ha llevado a pensar en optimizar los parámetros que influyen en la formación de capas delgadas por métodos electroquímicos. La técnica de deposición electroquímica o electrodeposición catódica ofrece una alternativa ventajosa desde un punto de vista económico y especialmente ofrece la posibilidad de utilizar sustratos de gran superficie. El enfoque inicial fue determinar los parámetros óptimos para el proceso de desarrollo de película delgada cuaternaria de CZTS. La electrodeposición se implementó mediante la técnica de polarización de un electrodo por el método potenciostático, o sea a potencial constante. Debido a que esta técnica se basa en el potencial de deposición de cada sustancia que constituye el baño electrolítico, se ha llevado a cabo un estudio sobre el efecto de los factores de complejidad para acercar estos potenciales de reducción. Una vez fueron depositadas las capas, se continuó con el estudio del proceso de recocido, que es un paso necesario en la formación de capas absorbentes de CZTS bajo la influencia del factor de complejidad, debido a que conviene reducir la temperatura de recocido mientras se intenta conservan las propiedades del material. Se sintetizaron películas de kesterita de alta calidad con una morfología compacta y una estructura cristalina bien definida a bajas temperaturas usando Na2SO4 como agente acomplejante. Posteriormente, las películas de kesterita CZTS se prepararon en diferentes sustratos conductores (ITO, FTO y Mo / vidrio) para estudiar el efecto del contacto posterior. Comprobamos que el mejor comportamiento se produce para una combinación específica de los parámetros estudiados. En particular este trabajo nos ha permitido controlar la composición de las películas depositadas, dominar el proceso de recocido y usar las técnicas de caracterización necesarias para evaluar la composicion, calidad y propiedades optoelectrónicas de las capas de CZTS sintetizadas. Finalmente, nuestra estrategia implementa una simulación digital de la célula solar CZTS utilizando el software SCAPS-1D. Después de la visualización experimental de las capas delgadas de CZTS en diferentes sustratos conductores, el modelado por el software SCAPS1D del dispositivo de células solares CZTS demostró que el contacto trasero Mo ofrece los mejores rendimientos.
[FR] L'augmentation des besoins énergétiques, notamment en matière de protection de l'environnement, a fortement stimulé la recherche dans le domaine de la conversion photovoltaïque ces dernières années. Le rayonnement solaire fournit une excellente ressource pour produire de l'électricité propre et durable sans pollution toxique ni réchauffement climatique, mais en termes de forte demande d'énergie pour la production de l’électricité ainsi que la toxicité ou la rareté des composants constituent les cellules solaires, cette technologie de transformation solaire est encore un peu limitée. En raison que ces paramètres constituent les principales préoccupations environnementales entourant l'industrie photovoltaïque. Le composé C2ZnSnS4 (CZTS) peut être considéré comme l'un des matériaux de couche absorbante les plus prometteurs pour les cellules solaires en couches minces à faible coût. L’abondance et la non-toxicité des éléments constitutifs ce matériau prometteur fait l'objet de ce travail. De toute évidence, cela nous amène à réfléchir pour optimiser les autres paramètres influençant la formation de couches minces par la méthode d'électrodéposition. Une technique de dépôt par voie électrochimique qui offre une alternative avantageuse du point de vue économique et surtout de la possibilité d’utiliser des substrats de grande surface. Initialement, l'accent était mis sur la détermination des paramètres optimaux pour le processus d’élaboration de couches minces du quaternaire CZTS. L'électrodéposition est mise en œuvre par la technique de polarisation d'une électrode potentiostatique. En raison, que cette technique reposant sur le potentiel de dépôt de chaque substance constituant le bain électrolytique, une étude a été menée sur l'effet des facteurs de complexité afin de rapprocher ces potentiels de réduction. Ensuite, Le processus de recuit qui est une étape nécessaire dans la formation de couches absorbantes en CZTS a été maîtriser, sous l'influence du facteur de complexité en raison de réduire la température de recuit tout en conservant les propriétés du matériau. Des films de kësterite de haute qualité avec une morphologie compacte et une structure cristalline bien définie à basse température ont été synthétisés en utilisant Na2SO4 comme agent complexant. Par la suite, les films de kestérite CZTS ont été préparés sur différents substrats conducteurs (ITO, FTO et Mo / verre) en raison de spécifier l'effet du contact arrière. Le meilleur comportement est une combinaison spécifique des paramètres étudiés. Ces travaux ont permis notamment de maîtriser la composition des films déposés, le processus de recuit ainsi que les techniques de caractérisation nécessaire. Finalement, notre stratégie met en œuvre une simulation numérique de la cellule solaire CZTS à l'aide du logiciel SCAPS − 1D. Après la visualisation expérimentale des couches minces de Czts sur différent substrats conducteur, une modélisation par le logiciel SCAPS-1D du dispositif CZTS cellules solaires a montré que le Mo contact arrière monte les meilleures performances.
[CA] L'augment de les necessitats energètiques, particularment en termes de protecció de l'entorn, ha estimulat en gran mesura la investigació en el camp de la conversió fotovoltaica en els últims anys. La radiació solar proporciona un recurs excel·lent per produir electricitat neta i sostenible sense contaminació tòxica ni escalfament global, però en termes de l'alta demanda d'energia elèctrica, així com la toxicitat o escassetat de components que constitueixen les cèl·lules solars, aquesta tecnologia de transformació solar encara trova barreres limitadores. En conseqüència aquests paràmetres constitueixen les principals preocupacions ambientals que envolten a la indústria fotovoltaica. El compost Cu2ZnSnS4 (CZTS) pot considerar-se com un dels materials absorbents més prometedors per a les cèl·lules solars de pel·lícula prima i de baix cost. L'abundància i la no toxicitat dels elements constitutius d'aquest prometedor material és el tema d'aquest treball. Aquest objectiu ens ha portat a treballar en l’optimització dels paràmetres que influeixen en la formació de capes primes de CZTS per mètodes electroquímics. La tècnica de deposició electroquímica o electrodeposició catòdica ofereix una alternativa avantatjosa des d'un punt de vista econòmic i especialment ofereix la possibilitat d'utilitzar substrats de gran superfície. L'enfocament inicial va ser determinar els paràmetres òptims per al procés de desenvolupament d’una pel·lícula prima quaternària de CZTS. La electrodeposició es va implementar mitjançant la tècnica de polarització d'un elèctrode pel mètode potenciostàtic, o siga a potencial constant. Aquesta tècnica es basa en el potencial de deposició de cada substància que constitueix el bany electrolític es diferent i per tant s'ha dut a terme un estudi sobre l'efecte dels factors de complexitat per tal apropar aquests potencials de reducció de tots els components involucrats. Un cop van ser dipositades les capes, es va continuar amb l’estudi del procés de recuit, que és un pas necessari en la formació de capes absorbents de CZTS sota la influència del factor de complexitat, a causa de la reducció de la temperatura de recuit mentre es conserven les propietats de l'material. Es van sintetitzar pel·lícules de kesterita d'alta qualitat amb una morfologia compacta i una estructura cristal·lina ben definida a baixes temperatures usant Na2SO4 com a agent acomplexant. Posteriorment, les pel·lícules de kesterita CZTS es van preparar en diferents substrats conductors (ITO, FTO i Mo / vidre) per estudiar l'efecte del contacte posterior sobre les capes fines. Obtinguerem que el millor comportament és una combinació específica dels paràmetres estudiats. En particular aquest treball ens ha permès controlar la composició de les pel·lícules dipositades, controlar el procés de recuit i usar les tècniques de caracterització necessàries per avaluar la composició, qualitat i propietats optoelectròniques de les capes de CZTS depositades. Finalment, en la nostra estratègia es va implementar una simulació numérica d’una cèl·lula solar de CZTS utilitzant el programari SCAPS-1D. Després de la visualització experimental de les capes primes de CZTS en diferents substrats conductors, el modelatge pel programari SCAPS-1D del dispositiu fotovoltaic de CZTS va demostrar que el contacte posterior de Mo és el que ofereix el millor rendiment.
I would like to thank the Moroccan Center for Scientific and Technical Research and the Doctoral school of the Polytechnic University of Valencia for the financial assistance they have allocated. I also extend my sincere thanks to the UPV Electron Microscopy Service and to Mr Ángel Sans Tresserras for their help to learn how to work with characterization techniques.
Toura, H. (2020). Elaboration and characterization by electrochemical technique CZTS thin layers for photovoltaic application [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/154334
TESIS
Limson, Janice Leigh. "Electrochemical studies of metal-ligand interactions and of metal binding proteins." Thesis, Rhodes University, 1999. http://hdl.handle.net/10962/d1018239.
Full textHawkins, Thomas Matthew. "Studies toward an electrochemical technique for the patterned immobilisation of biomolecules on surfaces." Thesis, Imperial College London, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.286621.
Full textYasinok, Gozde Ceren. "Development Of Electrochemical Etch-stop Techniques For Integrated Mems Sensors." Master's thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/12607538/index.pdf.
Full textC with 10gr/lt. AP. Different silicon etch samples are produced in METU-MET facilities to understand and optimize ECES parameters that can be used for CMOS microbolometers. The etch samples are fabricated using various processes, including thermal oxidation, boron and phosphorus diffusions, aluminum and silicon nitride layer deposition processes. Etching with the prepared samples shows the dependency of the depletion layer between p-substrate and n&
#8209
well, explaining the reason of the previous failures during post-CMOS etching of CMOS microbolometers from the front side. Succesfully etched CMOS microbolometers are achieved with back side etching in 6M KOH at 90 °
C, where &
#8209
3.5V and 1.5V are applied to the p-substrate and n-well. In summary, this study provides an extensive understanding of the ECES process for successful implementations of integrated MEMS sensors.
Korzan, Margaret Antonia. "Application of a passive electrochemical noise technique to localized corrosion of candidate radioactive waste container materials." Thesis, Massachusetts Institute of Technology, 1994. http://hdl.handle.net/1721.1/33516.
Full textLisenkov, Aleksey. "Electrochemical synthesis of thin oxide films on titanium and aluminium surfaces using high voltage anodisation technique." Doctoral thesis, Universidade de Aveiro, 2017. http://hdl.handle.net/10773/22469.
Full textA síntese eletroquímica de filmes finos de óxido usando a técnica de oxidação de alta tensão e a investigação da estrutura, propriedades físicas e químicas dos filmes obtidos são os principais objetivos desta tese. A anodização de metais sob a ação de vários kilovolts produz filmes com espessura pequena (até 180 nm) e com propriedades diferentes dos filmes formados usando técnicas eletroquímicas convencionais. As camadas de óxido depositadas desta forma conferem, frequentemente, melhores propriedades de proteção, semicondutoras e fotoeletroquímicas. No âmbito deste trabalho filmes finos sobre titânio e alumínio foram preparados em diferentes eletrólitos, incluindo soluções de ácidos e sais, bem como em água desionizada e peróxido de hidrogénio. Mostra-se que os filmes preparados por oxidação com descarga pulsada de alta tensão têm estrutura superficial e propriedades elétricas mais uniformes em comparação com os obtidos por anodização convencional. Outro objetivo do trabalho é a dopagem dos filmes anódicos com diferentes dopantes, por incorporação de espécies do eletrólito durante a formação do filme. Os filmes preparados por oxidação de descarga pulsada de alta tensão no titânio mostram uma melhor resposta de fotocorrente a comprimentos de onda pequenos e uma concentração mais baixa de dadores ionizados, relativamente aos filmes obtidos por anodização convencional. Os filmes preparados por descarga no alumínio e titânio são formados por uma camada compacta. Estudos sobre o processo de descarga revelaram que o principal fator que influencia a cinética de crescimento do filme de óxido é a concentração de defeitos pontuais, que por sua vez é determinada pela composição do eletrólito. Também se mostrou que as técnicas usando alta tensão permitem preparar filmes anódicos não só em soluções convencionais, mas igualmente em outros meios, tal como água desionizada, água destilada e peroxido de hidrogénio, onde a anodização por métodos convencionais (potenciostático ou galvanostático) é impossível. Além disso é revelado que a técnica da descarga pulsada de alta tensão é um método eficiente para encapsulação de nanocilindros de metal, preliminarmente depositados em nanoporos de titânia e alumina alinhados verticalmente.
Electrochemical synthesis of thin oxide films by using the high-voltage oxidation technique and investigation of structure, physical and chemical properties of the obtained films are the main objectives of this thesis. Anodisation of metals under action of several kilovolts allow to produce films with rather low thickness (up to 180 nm) and with properties different from the films created by using conventional electrochemical approaches. The oxide layers deposited in this way often confer advanced protective, semiconductor and photoelectrochemical properties. In the frame of this thesis thin films on titanium and aluminium were prepared in several electrolytes, including solutions of acids and salts as well as in deionised water and hydrogen peroxide. It is shown that the films prepared by powerful pulsed discharge oxidation are characterized by more uniform surface structure and electrical properties in comparison to those obtained by conventional anodization. Another aim of the work is doping of the anodic films with different dopants by incorporation of species from the electrolyte during the film formation. Films prepared by powerful pulsed discharge oxidation technique on titanium demonstrate a significantly improved photocurrent response at short wavelengths and an essentially lower concentration of ionized donors as compared with the films obtained by conventional anodization. The discharge-prepared films on both aluminium and titanium are composed by one compact layer. Studies of the discharge processes revealed that the main factor influencing the kinetics of the oxide film growth is the concentration of point defects which, in turn, is determined by the composition of electrolyte. Also, it was shown that the high voltage techniques allow to prepare anodic films not only in conventional solutions, but also in other media such as deionised water, distilled water and hydrogen peroxide, where anodisation by conventional (potentiostatic or galvanostatic) methods is impossible. Furthermore, the powerful pulsed discharge technique is shown as efficient method for encapsulation of metal nanorods preliminarily deposited into the vertically aligned titania and alumina nanopores.
Books on the topic "Electrochemical technique"
Lin, Changjian. An electrochemical technique for rapidly evaluating protective coatings on metals. Gaithersburg, MD: U.S. Dept. of Commerce, National Institute of Standards and Technology, 1988.
Find full textLin, Changjian. An electrochemical technique for rapidly evaluating protective coatings on metals. Gaithersburg, MD: U.S. Dept. of Commerce, National Institute of Standards and Technology, 1988.
Find full textSit, Shirley M. An electrochemical technique for measuring thin liquid films during squeeze flows. Ottawa: National Library of Canada, 1990.
Find full textM.J.U.T. van Wijngaarden. The development of an electrochemical technique for the determinationof chromium oxide activities in molten slag systems. Randburg, South Africa: Council For Mineral Technology, 1988.
Find full textMartin, Rachel D. Development and application of dynamic electrochemical techniques. [s.l.]: typescript, 1997.
Find full textFrederick, Van Staden Jacobus, and Aboul-Enein Hassan Y, eds. Electrochemical sensors in bioanalysis. New York: Marcel Dekker, 2001.
Find full textVisy, Csaba. In situ Combined Electrochemical Techniques for Conducting Polymers. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-53515-9.
Full textMojica-Calderon, C. Electrochemical techniques in hot corrosion of high temperature materials. Manchester: UMIST, 1992.
Find full textPapavinasam, Sankara. Advances in electrochemical techniques for corrosion monitoring and measurement. Edited by ASTM Committee G-1 on Corrosion of Metals. West Conshohocken, PA: ASTM International, 2009.
Find full textPapavinasam, Sankara, Neal S. Berke, and Sean Brossia, eds. Advances in Electrochemical Techniques for Corrosion Monitoring and Measurement. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2009. http://dx.doi.org/10.1520/stp1506-eb.
Full textBook chapters on the topic "Electrochemical technique"
Matsushita, Nobuhiro. "Surface Modification with Hydrothermal–Electrochemical Technique." In Novel Structured Metallic and Inorganic Materials, 485–503. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-7611-5_33.
Full textBesenhard, J. O. "Strengths and Limitations of the Electrochemical Technique." In Inorganic Reactions and Methods, 276–80. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2007. http://dx.doi.org/10.1002/9780470145326.ch161.
Full textStimming, Ulrich. "Use of the Frozen Electrolyte Electrochemical Technique for the Investigation of Electrochemical Behavior." In ACS Symposium Series, 275–93. Washington, DC: American Chemical Society, 1988. http://dx.doi.org/10.1021/bk-1988-0378.ch019.
Full textLiu, X. M., H. Y. Li, Jian Cheng Fang, Z. Y. Zhao, and Kai Yong Jiang. "Study on the Technique of Pulse Electrochemical Mechanical Finishing." In Advances in Grinding and Abrasive Technology XIII, 393–97. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-986-5.393.
Full textAbuzriba, Mokhtar B., and Salem M. Musa. "Measuring the Degree of Sensitization (DOS) Using an Electrochemical Technique." In Springer Proceedings in Physics, 197–203. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-16919-4_26.
Full textSuresh, Girija, U. Kamachi Mudali, and Baldev Raj. "Electrochemical Noise as Nondestructive Evaluation Technique for Understanding and Monitoring Corrosion." In Non-Destructive Evaluation of Corrosion and Corrosion-assisted Cracking, 198–244. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2019. http://dx.doi.org/10.1002/9781118987735.ch7.
Full textYe, Wei, and Xiao Xiang Wang. "Morphologies of Hydroxyapatite Crystal Deposited on Titanium Surface with Electrochemical Technique." In Key Engineering Materials, 601–4. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-422-7.601.
Full textZhou, Shi-Yu, Lei-Jie Lai, Guo-Ying Gu, and Li-Min Zhu. "A Digital Lock-In Amplifier Based Contact Detection Technique for Electrochemical Nanolithography." In Intelligent Robotics and Applications, 313–22. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-33515-0_32.
Full textSangeethakrishnan, S., E. Rajkeerthi, P. Hariharan, and G. Bhavesh. "Design and Development of Tool Electrode for Electrochemical Micromachining Using Reverse EMM Technique." In Lecture Notes on Multidisciplinary Industrial Engineering, 339–47. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9425-7_30.
Full textSharma, Priyanka, Prem Pal, Ashutosh Mishra, Mohit Bhandwal, and Ajay Sharma. "A Novel System for Exhaust Emission Reduction of Diesel Engine by Using Electrochemical Technique." In Lecture Notes in Mechanical Engineering, 243–49. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-6416-7_23.
Full textConference papers on the topic "Electrochemical technique"
Silveira Leal, José Eduardo, Teófilo Jacob Freitas e Souza, Sinésio Franco, Vera Lúcia Donizeti de Sousa FRanco, and Rosenda Arencibia. "A CONTRIBUTION TO ELECTROCHEMICAL NANOINDENTATION TECHNIQUE." In 25th International Congress of Mechanical Engineering. ABCM, 2019. http://dx.doi.org/10.26678/abcm.cobem2019.cob2019-1419.
Full textBARILLARO, G., F. D'ANGELO, and G. PENNELLI. "ELECTROCHEMICAL SILICON MICROMACHINING: A NEW TECHNIQUE." In Proceedings of the 8th Italian Conference. WORLD SCIENTIFIC, 2004. http://dx.doi.org/10.1142/9789812702944_0066.
Full textLi, Hongyou, Xiaomei Liu, Yinbiao Guo, Chen Jiang, and Hui Wang. "Research on Technique of Pulse Electrochemical Surface Finishing." In 2009 International Conference on Measuring Technology and Mechatronics Automation. IEEE, 2009. http://dx.doi.org/10.1109/icmtma.2009.537.
Full textCh., J., and J. Dawson. "Electrochemical noise monitoring technique for cathodic protection systems." In OCEANS '85 - Ocean Engineering and the Environment. IEEE, 1985. http://dx.doi.org/10.1109/oceans.1985.1160096.
Full textJumaah, Majd Ahmed, and Mohamed Rozali Othman. "Decolorization of landfill leachate using electrochemical oxidation technique." In THE 2015 UKM FST POSTGRADUATE COLLOQUIUM: Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2015 Postgraduate Colloquium. AIP Publishing LLC, 2015. http://dx.doi.org/10.1063/1.4931311.
Full textMa, Xiangjuan, Zucheng Wu, Feng Yu, Fan Luo, and Yanqing Cong. "Applications of Electrochemical Technique for Organic Wastewater Treatment." In 2008 2nd International Conference on Bioinformatics and Biomedical Engineering. IEEE, 2008. http://dx.doi.org/10.1109/icbbe.2008.414.
Full textMansfeld, Florian. "The Electrochemical Noise Technique — Applications in Corrosion Research." In NOISE AND FLUCTUATIONS: 18th International Conference on Noise and Fluctuations - ICNF 2005. AIP, 2005. http://dx.doi.org/10.1063/1.2036830.
Full textPrasad, S., N. Gupta, R. Narayanan, and T. Anderson. "An electrochemical flow visualization technique for liquid metal systems." In 36th AIAA Aerospace Sciences Meeting and Exhibit. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1998. http://dx.doi.org/10.2514/6.1998-735.
Full textDe Roux, Edwin, M. Terosiet, F. Kolbl, M. Boissiere, A. Histace, and O. Romain. "Toward an OFDM-Based Technique for Electrochemical Impedance Spectroscopy." In 2018 21st Euromicro Conference on Digital System Design (DSD). IEEE, 2018. http://dx.doi.org/10.1109/dsd.2018.00086.
Full textSurganov, V., and A. Mozalev. "Planar aluminium multilevel interconnection formed by electrochemical anodizing technique." In European Workshop Materials for Advanced Metallization. MAM'97 Abstracts Booklet. IEEE, 1997. http://dx.doi.org/10.1109/mam.1997.621070.
Full textReports on the topic "Electrochemical technique"
Lin, Changjian. An electrochemical technique for rapidly evaluating protective coatings on metals. Gaithersburg, MD: National Bureau of Standards, 1988. http://dx.doi.org/10.6028/nist.tn.1253.
Full textWolfenstine, J., D. Tran, K. Zhou, and J. Sakamoto. Thermoelectric Properties of Cobalt Triantimonide (CoSb3) Prepared by an Electrochemical Technique. Fort Belvoir, VA: Defense Technical Information Center, April 2010. http://dx.doi.org/10.21236/ada517673.
Full textKorzan, Margaret Antonia. Application of a passive electrochemical noise technique to localized corrosion of candidate radioactive waste container materials. Office of Scientific and Technical Information (OSTI), May 1994. http://dx.doi.org/10.2172/671864.
Full textRoy, Ajit. Galvanic corrosion testing using electrochemical and immersion techniques. Office of Scientific and Technical Information (OSTI), July 1996. http://dx.doi.org/10.2172/2647.
Full textBruce W. Bussert, John A. Crowley, Kenneth J. Kimball, and Brian J. Lashway. The Use of Electrochemical Techniques to Characterize Wet Steam Environments. Office of Scientific and Technical Information (OSTI), April 2003. http://dx.doi.org/10.2172/821376.
Full textHu, Hongqiang, Claire Xiong, Mike Hurley, and Ju Li. Establishing New Capability of High Temperature Electrochemical Impedance Spectroscopy Techniques for Equilibrium and Kinetic Experiments. Office of Scientific and Technical Information (OSTI), December 2017. http://dx.doi.org/10.2172/1468632.
Full textDeMuth, Scott, and C. Scherer. SAFEGUARDS PERFORMANCE MODELING - Development of Advanced Safeguards by Design (SBD) Analyses Techniques for an Electrochemical Reprocessing Facility, and Comparison with past Similar Efforts for Aqueous Reprocessing. Interim status report for FY 2009. Office of Scientific and Technical Information (OSTI), August 2009. http://dx.doi.org/10.2172/1551006.
Full text