Relevant bibliographies by topics / Electrical impedance spectroscopy

Academic literature on the topic 'Electrical impedance spectroscopy'

Author: Grafiati
Published: 4 June 2021
Last updated: 8 June 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Electrical impedance spectroscopy.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Electrical impedance spectroscopy"

1

S, El Asri. "The Use of Electrical Impedance Spectroscopy for Medical Application: A Mini Review." Physical Science & Biophysics Journal 7, no. 1 (January 5, 2023): 1–5. http://dx.doi.org/10.23880/psbj-16000250.

Full text
Abstract:
Electrical impedance spectroscopy (EIS) has emerged as a powerful technique in biophysics, enabling the analysis of biological tissues, cell behavior, and the development of biosensors. By measuring the impedance response of biological systems across a range of frequencies, EIS provides valuable insights into the electrical properties and structural characteristics of tissues and cells. This paper provides an overview of fundamental principles of EIS and the application of impedance spectroscopy in biophysic, highlighting its potential in understanding tissue properties, monitoring cell behavior, and designing biosensors for various biomedical applications.
APA, Harvard, Vancouver, ISO, and other styles
2

Vozáry, E., D. H. Paine, J. Kwiatkowski, and A. G. Taylor. "Prediction of soybean and snap bean seed germinability by electrical impedance spectroscopy." Seed Science and Technology 35, no. 1 (April 1, 2007): 48–64. http://dx.doi.org/10.15258/sst.2007.35.1.05.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Manjunath, Manjunath, Simon Hausner, André Heine, Patrick De Baets, and Dieter Fauconnier. "Electrical Impedance Spectroscopy for Precise Film Thickness Assessment in Line Contacts." Lubricants 12, no. 2 (February 10, 2024): 51. http://dx.doi.org/10.3390/lubricants12020051.

Full text
Abstract:
In this article, we focus on utilising electrical impedance spectroscopy (EIS) for the assessment of global and contact impedances in roller bearings. Our primary objective is to establish a quantitative prediction of lubricant film thickness in elasto-hydrodynamic lubrication (EHL) and investigate the impedance transition from ohmic to capacitive behaviour as the system shifts from boundary lubrication to EHL. To achieve this, we conduct measurements of electrical impedance, bearing and oil temperature, and frictional torque in a cylindrical roller thrust bearing (CRTB) subjected to pure axial loading across various rotational speeds and supply oil temperatures. The measured impedance data is analysed and translated into a quantitative measure of lubricant film thickness within the contacts using the impedance-based and capacitance-based methods. For EHL, we observe that the measured capacitance of the EHL contact deviates from the theoretical value based on a Hertzian contact shape by a factor ranging from 3 to 11, depending on rotational speed, load, and temperature. The translation of complex impedance values to film thickness, employing the impedance and capacitance method, is then compared with the analytically estimated film thickness using the Moes correlation, corrected for inlet shear heating effects. This comparison demonstrates a robust agreement within 2% for EHL film thickness measurement. Monitoring the bearing resistance and capacitance via EIS across rotational speeds clearly shows the transition from boundary to mixed lubrication as well as the transition from mixed lubrication to EHL. Finally, we have observed that monitoring the electrical impedance appears to have the potential to perform the run-in of bearings in a controlled way.
APA, Harvard, Vancouver, ISO, and other styles
4

Padilha Leitzke, Juliana, and Hubert Zangl. "Low-power electrical impedance tomography spectroscopy." COMPEL - The international journal for computation and mathematics in electrical and electronic engineering 38, no. 5 (September 2, 2019): 1480–92. http://dx.doi.org/10.1108/compel-12-2018-0530.

Full text
Abstract:
Purpose This paper aims to present an approach based on electrical impedance tomography spectroscopy (EITS) for the determination of water and ice fraction in low-power applications such as autarkic wireless sensors, which require a low computational complexity reconstruction approach and a low number of electrodes. This paper also investigates how the electrode design can affect the reconstruction results in tomography. Design/methodology/approach EITS is performed by using a non-iterative method called optimal first order approximation. In addition to that, a planar electrode geometry is used instead of the traditional circular electrode geometry. Such a structure allows the system to identify materials placed on the region above the sensor, which do not need to be confined in a pipe. For the optimization, the mean squared error (MSE) between the reference images and the obtained reconstructed images was calculated. Findings The authors demonstrate that even with a low number of four electrodes and a low complexity reconstruction algorithm, a reasonable reconstruction of water and ice fractions is possible. Furthermore, it is shown that an optimal distribution of the sensor electrodes can help to reduce the MSE without any costs in terms of computational complexity or power consumption. Originality/value This paper shows through simulations that the reconstruction of ice and water mixtures is possible and that the electrode design is a topic of great importance, as they can significantly affect the reconstruction results.
APA, Harvard, Vancouver, ISO, and other styles
5

McGivney, Debra, Daniela Calvetti, and Erkki Somersalo. "Quantitative imaging with electrical impedance spectroscopy." Physics in Medicine and Biology 57, no. 22 (October 18, 2012): 7289–302. http://dx.doi.org/10.1088/0031-9155/57/22/7289.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yao, Jia-Feng, Jian-Fen Wan, Lu Yang, Kai Liu, Bai Chen, and Hong-Tao Wu. "Electrical characteristics of cells with electrical impedance spectroscopy." Acta Physica Sinica 69, no. 16 (2020): 163301. http://dx.doi.org/10.7498/aps.69.20200601.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Yin, Hong-Run, Ming Ye, Yang Wu, Kai Liu, Hua-Ping Pan, and Jia-Feng Yao. "Biological tissue detection based on electrical impedance spectroscopic tomograsphy." Acta Physica Sinica 71, no. 4 (2022): 048706. http://dx.doi.org/10.7498/aps.71.20211600.

Full text
Abstract:
A bioimpedance spectroscopic imaging method for detecting the biological tissue based on electrical impedance tomography (EIT) and bioimpedance spectroscopy (BIS) is proposed. This method visualizes the target area and accurately recognizes the target type, which can be used for detecting the early lung cancer, assist clinicians in accurately detecting the early lung cancer, and improving the cure rate of early lung cancer. In this paper the bioimpedance spectroscopic imaging method is verified to be feasible and effective in detecting the early lung cancer through numerical simulation. The simulation results show that 1) the bioimpedance spectroscopic imaging method can realize the visualization of the early lung cancer area and accurately distinguish the type of early lung cancer, and 2) the optimal number of acquisitions of impedance spectroscopy is 4, and the best classifier is Linear-SVM, and the average classification accuracy of 5-fold cross-validation can reach 99.9%. In order to verify the simulation results, three biological tissues with different electrical characteristics are selected to simulate cancerous regions used for detection. The experimental results show that the method can visualize the biological tissue area and distinguish the type of biological tissue. This method can integrate the advantages of electrical impedance imaging and bioimpedance spectroscopy, and is very promising way of detecting early lung cancer.
APA, Harvard, Vancouver, ISO, and other styles
8

Chowdhury, Atanu, Tushar Kanti Bera, Dibyendu Ghoshal, and Badal Chakraborty. "Electrical Impedance Variations in Banana Ripening: An Analytical Study with Electrical Impedance Spectroscopy." Journal of Food Process Engineering 40, no. 2 (May 11, 2016): e12387. http://dx.doi.org/10.1111/jfpe.12387.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Cheng, Junhui, Pengpeng Yu, Yourui Huang, Gang Zhang, Chengling Lu, and Xueping Jiang. "Application Status and Prospect of Impedance Spectroscopy in Agricultural Product Quality Detection." Agriculture 12, no. 10 (September 22, 2022): 1525. http://dx.doi.org/10.3390/agriculture12101525.

Full text
Abstract:
The nondestructive testing of agricultural products has always been a key technology for the modernization of agriculture and food. By applying a sinusoidal voltage (current) excitation signal of variable frequency, the relationship between the amplitude, frequency and phase of the response signal is obtained, and the measured response function in a certain frequency range is obtained, constructing the correlation between impedance spectroscopy and matter properties. Electrical impedance spectroscopy (EIS) is a widely used method for the nondestructive characterization of agricultural products, and its applications in the agricultural field has attracted increasing attention. This paper summarizes the research of electrical impedance spectroscopy (EIS) in the detection of grain quality, fruit and vegetable quality, meat quality and food quality from 2005 to 2022. The potential and development direction of electrical impedance spectroscopy in the nondestructive testing of agricultural product quality are prospected, which provides a reference for scientific researchers who applied electrical impedance spectroscopy in agricultural product quality detection.
APA, Harvard, Vancouver, ISO, and other styles
10

Padilha Leitzke, Juliana, and Hubert Zangl. "A Review on Electrical Impedance Tomography Spectroscopy." Sensors 20, no. 18 (September 10, 2020): 5160. http://dx.doi.org/10.3390/s20185160.

Full text
Abstract:
Electrical Impedance Tomography Spectroscopy (EITS) enables the reconstruction of material distributions inside an object based on the frequency-dependent characteristics of different substances. In this paper, we present a review of EITS focusing on physical principles of the technology, sensor geometries, existing measurement systems, reconstruction algorithms, and image representation methods. In addition, a novel imaging method is proposed which could fill some of the gaps found in the literature. As an example of an application, EITS of ice and water mixtures is used.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Electrical impedance spectroscopy"

1

Foley, John J. "Microfluidic Electrical Impedance Spectroscopy." DigitalCommons@CalPoly, 2018. https://digitalcommons.calpoly.edu/theses/1950.

Full text
Abstract:
The goal of this study is to design and manufacture a microfluidic device capable of measuring changes in impedance valuesof microfluidic cell cultures. Tocharacterize this, an interdigitated array of electrodes was patterned over glass, where it was then bonded to a series of fluidic networks created in PDMS via soft lithography. The device measured ethanol impedance initially to show that values remain consistent over time. Impedance values of water and 1% wt. saltwater were compared to show that the device is able to detect changes in impedance, with up to a 60% reduction in electrical impedance in saltwater. Cells were introduced into the device, where changes in impedance were seen across multiple frequencies, indicating that the device is capable of detecting the presence of biologic elements within a system. Cell measurements were performed using NIH-3T3 fibroblasts.
APA, Harvard, Vancouver, ISO, and other styles
2

Sánchez, Terrones Benjamín. "Broadband electrical impedance spectroscopy for dynamic electrical bio-impedance characterization." Doctoral thesis, Universitat Politècnica de Catalunya, 2012. http://hdl.handle.net/10803/132281.

Full text
Abstract:
The electrical impedance of biological samples is known in the literature as Electrical Bioimpedance (EBI). The Electrical Bioimpedance enables to characterize physiological conditions and events that are interesting for physiological research and medical diagnosis. Although the Electrical Bioimpedance weakness is that it depends on many physiological parameters, on the other hand, it is suitable for many medical applications where minimally invasive and real-time measurements with simple and practical implementations are needed. The Electrical Impedance Spectroscopy (EIS) techniques based on broadband excitations are expected to help to understand various unsolved problems in biomedical applications. Broadband EIS opens up the possibility to reduce drastically the measuring time for acquiring EBI time-variations but, at the same time, measuring in a short time compromises the EBI accuracy. The way to overcome this intrinsic loss of accuracy relies on the design of the appropriate time/frequency input excitation properties and the use of the suitable spectral analysis processing techniques. The presented thesis covers the topics related to study of broadband excitations for Impedance Spectroscopy in biomedical applications and, more specific, the influence of the multisine excitation time/frequency properties on the impedance spectrum accuracy and its optimization. Furthermore, an advanced fast signal processing method has been implemented to process in real-time EBI data corrupted by transients, a common situation when measuring in a short measuring time. Despite being the goal to apply all this knowledge for myocardial tissue regeneration monitoring, at the moment of drafting the thesis, any of the research projects that have supported this thesis have issued functional beating tissue. For that reason, the theory presented has been validated by a set of experimental measurements over animals and patients where the impedance spectrum time-varying properties were pretended to be characterized. The thesis presents novel findings of relevance of a successful application of broadband EIS in two different measurement campaigns where it has been put in practice: (1) within the collaboration of the pneumology and cardiology service from Hospital Santa Creu i Sant Pau for in-vivo human lung tissue characterization, and (2), within the measurement of animal healthy myocardium tissue electrical impedance including its dynamic behavior during the cardiac cycle.
APA, Harvard, Vancouver, ISO, and other styles
3

Molckovsky, Andrea. "Monitoring photodynamic therapy with electrical impedance spectroscopy." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape2/PQDD_0021/MQ54094.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Liu, Xing, and s3072856@student rmit edu au. "Electrical Impedance Spectroscopy Applied in Plant Physiology Studies." RMIT University. Electrical and Computer Engineering, 2006. http://adt.lib.rmit.edu.au/adt/public/adt-VIT20080428.092529.

Full text
Abstract:
Electrical Impedance Spectroscopy (EIS) is a relatively new method applied to food quality assessment. EIS allows relatively inexpensive assessment, is fast, easy to operate and non-invasive. It has been adopted for investigation of fundamental electrical properties of plant tissues. Although the applications of EIS for food quality determination have been reported previously, the analytical relationships between electrical impedance properties and quality criteria have not yet been fully developed. Further exploration is thus important in acquiring more data on electrical impedance characteristics of fruits and vegetables and researching new approaches for determination of their quality. This dissertation aims to investigate the electrical impedance properties of fruits and vegetables, and explore the relationship between impedance and quality criteria. In particular, the present dissertation outlines experimental research conducted on relationships between impedance properties and fruit tastes as well as the impedance changes observed during ripening process. Impedance measurement to monitor moisture content changes in the progress of drying is also included in this research. In summary, the impedance properties have merits in fruits and vegetables quality assessment. The current used subjective visual inspection and assessment could be replaced by the EIS based approach as it is a more precise measurement of food quality. Further study is required to give this method practical value.
APA, Harvard, Vancouver, ISO, and other styles
5

Nguyen, Son Thanh. "The effects of skin moisturizers using electrical impedance spectroscopy." Thesis, University of Nottingham, 2016. http://eprints.nottingham.ac.uk/32129/.

Full text
Abstract:
Skin Electrical Impedance Spectroscopy (EIS) is a method that involves the injection of an AC current into human tissue and measurement of the resulting voltage drop. By measuring the tissue over a range of frequencies, the impedance spectrum can then be used to detect changes in the underlying nature of the skin tissue. One potential application is in monitoring the effects of over the counter products such as skin moisturisers on human skin. This can be useful for cosmetics companies in new product development where users of the cosmetic product could use such a device in their own home. A low cost, portable, custom-made bio-impedance analyser based on a four-point probe sensor has been constructed for measuring the skin impedance over short and long time periods. Long term measurements are motivated by manufacturer claims that the effects of moisturisers last up to 24 hours and hence a custom made device has been developed to carry out long term monitoring. The system is based around a dsPIC33F board that contains a DSP processor, Analogue Frontend and analogue stimulus all connected to a 4-point probe sensor. 100µA AC current (according to Medical Standard 60601-1) is passed to the skin through two outer probes and a voltage drop measured across the two inner probes. A DSP controls the analogue frontend, processes the measured data and transfers data to a PC for real time display. The portable custom-made device is validated against a Solartron 1260 + 1294 impedance analyser and achieved a within 5% error. Four different commercial skin creams: Bio-oil, Nivea, Palmer’s Olive Butter and Cocoa Butter have been investigated. Under controlled environmental conditions, four kinds of cream were applied to an allocated area of the arm for 1 minute. The EIS was then measured for up to 5 hours on these regions by the four point probe sensors captured by the custom-made device. Nivea, Cocoa Butter and Olive Butter have a similar response as they are type II humectants which attract water from deeper dermis to the stratum corneum. Bio oil however, can be classified as a type I occlusives as it blocked water vaporized from stratum corneum. The Impedance results can discriminate between Bio-oil/ Bare skin (Type I) and the other three Type II moisturizers (Nivea, Olive and Cocoa). This discrimination is appointed in two clear features: firstly, the impedance values from the type II creams have a much reduced variability when compared to the bare skin and Bio-oil; secondly, the plots of R versus X showed for the Type II creams to have a non “constant phase element” dominance whilst bare skin and Bio-oil showed no such behavior. Phase results demonstrated additional capacitance effects of Bio oil compared to other moisturizers. Simulation models are provided to compare with these practical results with the model fitting process.
APA, Harvard, Vancouver, ISO, and other styles
6

Lue, Liqin. "Aspects of an electrical impedance tomography spectroscopy (EITS) system." Thesis, University of Sheffield, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.481744.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Keshtkar, Ahmad. "Characterisation of human bladder urothelium using electrical impedance spectroscopy." Thesis, University of Sheffield, 2004. http://etheses.whiterose.ac.uk/15164/.

Full text
Abstract:
Bladder cancer is the most common malignancy in elderly people. In developed countries most bladder cancers are transitional cell carcinomas (TCC). This is a cancer of the urothelium (a transitional epithelium lining the bladder). In the UK there are approximately 13,000 new cases and 5400 deaths per annum (Black, Bray et al. 1997). Carcinoma in situ (CIS) is an early case of the invasive cancer, which is flat, nonpapillary and difficult to detect precisely by using common methods. It is an aggressive form of TCC which may progress to muscle invasive cancer. Bladder pathology is usually investigated visually by cystoscopy. Erythematous areas of the urothelium are usually observed but these can represent different conditions ranging from simple inflammation to flat CIS. CIS cannot be differentiated visually from other erythematous tissues. Biopsies must be taken from the suspect area to obtain diagnostic information. The selection of biopsy sites depends on simple visual inspection thus is effectively random, and can be negative in up to 90% of the patients (van der Meijden, Oosterlinck et al. 1999). This is a relatively high cost procedure in terms of both time and money and is associated with discomfort for the patient and morbidity. Electrical impedance spectroscopy (EIS) is a non-invasive screenIng technique to separate malignant areas from non-malignant areas in the urinary bladder. This is a result of the electrical impedance spectrum of the tissue being a function of tissue structure at the cellular level. The feasibility of adapting this minimally invasive technique to screen for bladder cancer, CIS during cystoscopy has been explored and compared with histopathological evaluation of urinary bladder lesions, both ex vivo and in vivo. Finite element modelling technique have been used to explore the relationship between urothelial morphology and the impedance spectrum. Both measured and modelled results showed that this technique is able to separate benign and malignant bladder tissue groups and the in vivo measurements suggest that classification of individual measurements should be possible.
APA, Harvard, Vancouver, ISO, and other styles
8

Yaremyk, R. Ya. "DSP-Based Information-Measuring Microdevice for Electrical Impedance Spectroscopy Analysis." Thesis, Sumy State University, 2016. http://essuir.sumdu.edu.ua/handle/123456789/47278.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ma, Hongshen 1978. "Electrochemical Impedance Spectroscopy using adjustable nanometer-gap electrodes." Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/42240.

Full text
Abstract:
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2007.
Includes bibliographical references (p. 151-154).
Electrochemical Impedance Spectroscopy (EIS) is a simple yet powerful chemical analysis technique for measuring the electrical permittivity and conductivity of liquids and gases. Presently, the limiting factor for using EIS as a portable chemical detection technology is the lack of absolute accuracy stemming from uncertainties in the geometrical factor used to convert measurable quantities of capacitance and conductance into the intrinsic parameters of permittivity and conductivity. The value of this geometrical conversion factor can be difficult to predict since it is easily affected by fringing electric fields, manufacturing variations, and surface chemistry. Existing impedance test cells typically address this problem using a calibration liquid with known permittivity and conductivity, however, this correction is not feasible in many applications since the calibration liquid may irreversibly contaminate the test electrodes. This thesis presents a technique for accurately measuring the permittivity and conductivity of liquids and gases without requiring the use of calibration liquids. This technique is made possible by precisely controlling the separation between two spherical electrodes to measure capacitance and conductance of the sample medium as a function of electrode separation. By leveraging the geometrical accuracy of the spherical electrodes and precise control of the electrode separation, the permittivity and conductivity of the sample can be determined without wet calibration. The electrode separation is adjusted using a flexure stage and a servomechanical actuator, which enables control the electrode separation with 0.25 nm resolution over a range of 50 gm. The nanometer smooth surfaces of the spherical electrodes also enable electrode gaps of less than 20 nm to be created.
(cont.) The technique for measuring permittivity and conductivity presented in this thesis could eventually be adapted to make miniaturized disposable impedance test cells for chemical analysis. Such systems could take advantage of conductivity assays to determine the presence and concentration of specific substances. The adjustable nanometer electrode gap can also be used to study the properties of chemical and biological systems in highly confined states. These studies are fundamentally important for understanding biochemical processes in natural systems where reactions often take place inside confined structures such as cells, organelles, and the intercellular matrix.
by Hongshen Ma.
Ph.D.
APA, Harvard, Vancouver, ISO, and other styles
10

Ha, Sungjae. "A malaria diagnostic system based on electric impedance spectroscopy." Thesis, Massachusetts Institute of Technology, 2011. http://hdl.handle.net/1721.1/66030.

Full text
Abstract:
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2011.
Cataloged from PDF version of thesis.
Includes bibliographical references (p. 69-71).
Malaria caused by Plasmodium falciparum infection is one of the major threats to world health and especially to the community without proper medical care. New approach to cost-efficient, portable, miniaturized diagnostic kit is needed. This work explores electric impedance spectroscopy (EIS) on a microfluidic device as a means of malaria diagnosis. This work introduces a microfabricated probe with microfluidic channel, and a high speed impedance analyzer circuit board. Combination of microfluidic device and circuit board resulted in a small-sized EIS system for micro-particles such as human red blood cell (RBC). After invasion by the parasites, RBC undergoes physiological changes including electrical property of cytoplasm and membrane. Detection of infected RBC is demonstrated as well as differentiation of micro-beads by surface charge density using EIS-based diagnostic system. Diagnosis based on EIS has merits over other diagnostic methods since it is label-free and quantitative test and applicable to whole blood, and also the test does not need bulky optical and electrical equipments.
by Sungjae Ha.
S.M.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Electrical impedance spectroscopy"

1

Molckovsky, Andrea. Monitoring photodynamic therapy with electrical impedance spectroscopy. Ottawa: National Library of Canada, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mijarez-Castro, R. M. Digital signal processor waveform generator for use in electrical impedance spectroscopy. Manchester: UMIST, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

United States. National Aeronautics and Space Administration., ed. [Frequency response measurements in battery electrodes]: [final report, 1 Feb. - 31 Dec. 1991]. [Washington, DC: National Aeronautics and Space Administration, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

[Frequency response measurements in battery electrodes]: [final report, 1 Feb. - 31 Dec. 1991]. [Washington, DC: National Aeronautics and Space Administration, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Magee, Patrick, and Mark Tooley. Intraoperative monitoring. Edited by Jonathan G. Hardman. Oxford University Press, 2017. http://dx.doi.org/10.1093/med/9780199642045.003.0043.

Full text
Abstract:
Chapter 25 introduced some basic generic principles applicable to many measurement and monitoring techniques. Chapter 43 introduces those principles not covered in Chapter 25 and discusses in detail the clinical applications and limitations of the many monitoring techniques available to the modern clinical anaesthetist. It starts with non-invasive blood pressure measurement, including clinical and automated techniques. This is followed by techniques of direct blood pressure measurement, noting that transducers and calibration have been discussed in Chapter 25. This is followed by electrocardiography. There then follows a section on the different methods of measuring cardiac output, including the pulmonary artery catheter, the application of ultrasound in echocardiography, pulse contour analysis (LiDCO™ and PiCCO™), and transthoracic electrical impedance. Pulse oximetry is then discussed in some detail. Depth of anaesthesia monitoring is then described, starting with the electroencephalogram and its application in BIS™ monitors, the use of evoked potentials, and entropy. There then follow sections on gas pressure measurement in cylinders and in breathing systems, followed by gas volume and flow measurement, including the rotameter, spirometry, and the pneumotachograph, and the measurement of lung dead space and functional residual capacity using body plethysmography and dilution techniques. The final section is on respiratory gas analysis, starting with light refractometry as the standard against which other techniques are compared, infrared spectroscopy, mass spectrometry, and Raman spectroscopy (the principles of these techniques having been introduced in Chapter 25), piezoelectric and paramagnetic analysers, polarography and fuel cells, and blood gas analysis.
APA, Harvard, Vancouver, ISO, and other styles
6

Electrochemical Impedance Spectroscopy In Pem Fuel Cells Fundamentals And Applications. Springer, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Electrical impedance spectroscopy"

1

Auffan, Mélanie, Catherine Santaella, Alain Thiéry, Christine Paillès, Jérôme Rose, Wafa Achouak, Antoine Thill, et al. "Electrical Impedance Spectroscopy." In Encyclopedia of Nanotechnology, 671. Dordrecht: Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-90-481-9751-4_100209.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bertemes-Filho, Pedro. "Electrical Impedance Spectroscopy." In Bioimpedance in Biomedical Applications and Research, 5–27. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-74388-2_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Zhu, Yimei, Hiromi Inada, Achim Hartschuh, Li Shi, Ada Della Pia, Giovanni Costantini, Amadeo L. Vázquez de Parga, et al. "Single-Cell Electrical Impedance Spectroscopy." In Encyclopedia of Nanotechnology, 2425. Dordrecht: Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-90-481-9751-4_100764.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Repo, Tapani, Yang Cao, Raimo Silvennoinen, and Harry Ozier-Lafontaine. "Electrical Impedance Spectroscopy and Roots." In Measuring Roots, 25–49. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-22067-8_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Lasia, Andrzej. "Definition of Impedance and Impedance of Electrical Circuits." In Electrochemical Impedance Spectroscopy and its Applications, 7–66. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-8933-7_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Srinivasan, Ramanathan, and Fathima Fasmin. "Data Analysis – Equivalent Electrical Circuits." In An Introduction to Electrochemical Impedance Spectroscopy, 65–79. First edition. | Boca Raton : CRC Press, 2021.: CRC Press, 2021. http://dx.doi.org/10.1201/9781003127932-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

González-Correa, Carlos-Augusto. "Clinical Applications of Electrical Impedance Spectroscopy." In Bioimpedance in Biomedical Applications and Research, 187–218. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-74388-2_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hussain, M. Iftikhar, Ali El-Keblawy, Nosheen Akhtar, and Ahmed S. Elwakil. "Electrical Impedance Spectroscopy in Plant Biology." In Sustainable Agriculture Reviews, 395–416. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-73245-5_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Slipher, Geoffrey A., Robert A. Haynes, and Jaret C. Riddick. "Electrical Impedance Spectroscopy for Structural Health Monitoring." In Conference Proceedings of the Society for Experimental Mechanics Series, 41–48. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-21762-8_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Slipher, Geoffrey A., Robert A. Haynes, and Jaret C. Riddick. "Electrical Impedance Spectroscopy for Structural Health Monitoring." In Experimental and Applied Mechanics, Volume 6, 1–11. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-06989-0_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Electrical impedance spectroscopy"

1

AlQudah, Ayat, Rim Barioul, Khaldon Lweesy, Hossam Elkhalil, Mohammad Ibbini, and Olfa Kanoun. "Electrical Impedance Myography Measurements for Gesture Recognition Data Normalization." In 2022 International Workshop on Impedance Spectroscopy (IWIS). IEEE, 2022. http://dx.doi.org/10.1109/iwis57888.2022.9975108.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bathel, Henning, Lam Vien Che, Julius Zimmermann, Alina Weizel, Hermann Seitz, and Ursula van Rienen. "Electrical impedance spectroscopy on capacitively coupled electrodes for cartilaginous cell stimulation." In 2022 International Workshop on Impedance Spectroscopy (IWIS). IEEE, 2022. http://dx.doi.org/10.1109/iwis57888.2022.9975112.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Nurjahan, Tanzila, Felipe de Assis Dias, Uwe Hampel, and Eckhard Schleicher. "Investigation of Complex Electrical Properties of Concrete: A Numerical Model Analysis." In 2022 International Workshop on Impedance Spectroscopy (IWIS). IEEE, 2022. http://dx.doi.org/10.1109/iwis57888.2022.9975127.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bader, Oumaima, Najoua Essoukri Ben Amara, and Olfa Kanoun. "Realistic 2D Model of the Human Thorax for Electrical Impedance Tomography." In 2022 International Workshop on Impedance Spectroscopy (IWIS). IEEE, 2022. http://dx.doi.org/10.1109/iwis57888.2022.9975137.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Haddad, Hamdi, Oumaima Bader, Mariem Hafsa, Najoua Essoukri Ben Amara, and Olfa Kanoun. "Forward Modelling of the Human Thorax for Electrical Impedance Tomography Measurements." In 2021 International Workshop on Impedance Spectroscopy (IWIS). IEEE, 2021. http://dx.doi.org/10.1109/iwis54661.2021.9711884.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Nowak, Lukasz J., and Martin J. Lankheet. "On Using Electrical Impedance Measurements for Fish Detection in Sea- and Freshwater." In 2023 International Workshop on Impedance Spectroscopy (IWIS). IEEE, 2023. http://dx.doi.org/10.1109/iwis61214.2023.10302806.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hafsa, Mariem, Bilel Ben Atitallah, Taha ben Salah, Najoua Essoukri Ben Amara, and Olfa Kanoun. "Hand Gesture Recognition based on Electrical Impedance Tomography Measurements using Genetic Algorithms." In 2021 International Workshop on Impedance Spectroscopy (IWIS). IEEE, 2021. http://dx.doi.org/10.1109/iwis54661.2021.9711814.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Cao, Yuan, Julia Floehr, Erkan Yilmaz, Tom Kremers, and Uwe Schnakenberg. "Microfluidic-Based Electrical Impedance Spectroscopy System Using Multilevel Lamination of Dry Film Photoresist." In 2021 International Workshop on Impedance Spectroscopy (IWIS). IEEE, 2021. http://dx.doi.org/10.1109/iwis54661.2021.9711851.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bader, Oumaima, Mariem Hafsa, Najoua Essoukri Ben Amara, and Olfa Kanoun. "Two-Dimensional Forward Modeling for Human Thorax Imaging Based on Electrical Impedance Tomography." In 2021 International Workshop on Impedance Spectroscopy (IWIS). IEEE, 2021. http://dx.doi.org/10.1109/iwis54661.2021.9711764.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ait-Idir, William, Salah Touhami, Meriem Daoudi, Jerome Dillet, Julia Mainka, and Olivier Lottin. "Oxygen Transport Impedance in a Polymer Electrolyte Membrane Fuel Cell Equivalent Electrical Circuit." In 2021 International Workshop on Impedance Spectroscopy (IWIS). IEEE, 2021. http://dx.doi.org/10.1109/iwis54661.2021.9711832.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Electrical impedance spectroscopy' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography