Relevant bibliographies by topics / Electrical and Electronic Engineering

Academic literature on the topic 'Electrical and Electronic Engineering'

Author: Grafiati
Published: 4 June 2021
Last updated: 20 April 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Electrical and Electronic Engineering.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Electrical and Electronic Engineering"

1

Chen, Sen, and Jing Liu. "Liquid metal printed electronics towards ubiquitous electrical engineering." Japanese Journal of Applied Physics 61, SE (April 5, 2022): SE0801. http://dx.doi.org/10.35848/1347-4065/ac5761.

Full text
Abstract:
Abstract Conventional electronic manufacturers are generally not easily accessible due to complicated procedures, time, material and energy consuming, and may generate potential pollution to the environment. From an alternative, liquid metal printed electronics to quickly fabricate electronic circuits and functional devices were proposed a decade before. To promote the further development and application of liquid metal printed electronics, this review aims to summarize and analyze the progress of liquid metal printed electronics from three aspects, namely electronic inks, printing technology and applications. Then, we will discuss the challenges and opportunities for further development of liquid metal printed electronics from several aspects including material modification, technological innovation, equipment upgrading and potential applications. It is expected that liquid metal printed electronics allow one to make electronics at anytime, anywhere at low cost which indicates the coming of a new era of ubiquitous electrical engineering.
APA, Harvard, Vancouver, ISO, and other styles
2

Buchanan, W. J. "An Applied Viewpoint on Software Engineering for Electrical and Electronic Engineers." International Journal of Electrical Engineering & Education 32, no. 3 (July 1995): 223–34. http://dx.doi.org/10.1177/002072099503200304.

Full text
Abstract:
An applied viewpoint on software engineering for electrical and electronic engineers This paper describes how Software Engineering can be taught to Electronics students in a form which reinforces electrical/electronic theory, makes code development interesting and helps explain the software development cycle.
APA, Harvard, Vancouver, ISO, and other styles
3

Sato, Yukihiko. "Education in Electrical and Electronic Engineering." IEEJ Transactions on Fundamentals and Materials 127, no. 1 (2007): 2–3. http://dx.doi.org/10.1541/ieejfms.127.2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lozano-Nieto, A. "Electrical and Electronics Engineering Dictionary." IEEE Transactions on Professional Communication 47, no. 4 (December 2004): 337. http://dx.doi.org/10.1109/tpc.2004.837972.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

NISHITANI, Yosuke. "Engineering Plastics in Electrical and Electronic Applications." Journal of The Institute of Electrical Engineers of Japan 140, no. 1 (January 1, 2020): 32–35. http://dx.doi.org/10.1541/ieejjournal.140.32.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Monaco, V. A. "Electrical and Electronic Engineering Education in Italy." Measurement and Control 23, no. 3 (April 1990): 75–80. http://dx.doi.org/10.1177/002029409002300303.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Dahnoun, Naim. "Teaching electronics to first-year non-electrical engineering students." International Journal of Electrical Engineering & Education 54, no. 2 (February 7, 2017): 178–86. http://dx.doi.org/10.1177/0020720917692345.

Full text
Abstract:
Teaching electronics is not only for electrical and electronics students but also for mechanical, aerospace, engineering design, civil and engineering mathematics programmes, which are likely to have electronics units as part of their curriculum. To teach electronics for these non-electronic programmes is very challenging in many aspects. First, the electronics unit has to satisfy the learning outcomes for each programme. Second, the student’s motivation is normally very low since electronics is not the career the students would like to pursue. Third, the timetabling can be an issue when a large number of students are enrolled; for instance, at the University of Bristol, over 340 students are registered for the electronics unit. Due to this large number and the capacity of the electrical laboratory, students will have laboratory experiments timetabled in different weeks and some may have laboratory experiments before the lectures are covered. Finally, a method of assessing this large number of students has to be put into place. In this paper, the content of the unit including the laboratory experiments, the methods of course delivery and the assessment methods are justified. Also, since students learn differently and have a variety of motivations, a combination of teaching methods has to be found to satisfy more students and improve the learning outcomes.
APA, Harvard, Vancouver, ISO, and other styles
8

Pavlenko, Olha. "Research into professional training of elecronics engineers in Ukraine and the USA: basic concepts." Continuing Professional Education: Theory and Practice, no. 3-4 (2018): 57–61. http://dx.doi.org/10.28925/1609-8595.2018.3-4.5761.

Full text
Abstract:
The article explores the impact of the rapid development of electronic devices and systems in the world, in particular in the USA on setting the new challenges for Ukrainian engineering universities to attract advanced experience in training Electronics Engineering professionals. Since there are differences in the interpretation of a number of concepts in the area of Electronic Engineering in Ukrainian education as compared to the US, the article examines the relationship between the terms «electrical» and «electronic engineering», defines and compares such concepts as «electronics specialist», «electronics engineer», «professional training of electronics specialists», and «US higher education institution» in Ukrainian and US educational and scientific settings. The article advances our understanding of professional occupation outlook of a specialist in as a professional, who studies the field of electronic engineering, and is involved in the study, design, development or testing of electronic components, circuits and systems for commercial, industrial, military or scientific use using knowledge of electronic theory and its properties. By comparing Ukrainian and US higher education institutions in terms of their views and approaches to training electronics engineers and mutual understanding of Electronic Engineering as an electrical engineering discipline, together these findings provide important insights into application of engineering training practices into Ukrainian tertiary engineering settings, give grounds for a further research into pedagogical theory as well as organization and network of higher education institutions for training electronics engineers in order to implement the best practices in higher education institutions of Ukraine.
APA, Harvard, Vancouver, ISO, and other styles
9

Wada, Keiji. "Tokyo Metropolitan University, Department of Electrical and Electronic Engineering, Power Electronics Laboratory." Journal of The Japan Institute of Electronics Packaging 16, no. 1 (2013): 77. http://dx.doi.org/10.5104/jiep.16.77.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Pu, Hai. "Application Electrical Engineering Training and Intelligent Technology of Electrical and Electronic Technology under Artificial Intelligence Technology." E3S Web of Conferences 253 (2021): 01070. http://dx.doi.org/10.1051/e3sconf/202125301070.

Full text
Abstract:
With the development of the times and the improvement of modern industrial technology, computer technology has been greatly developed, so a new concept has been put forward, that is, artificial intelligence. And the composition of modern life is mainly electricity, so in the current era, electronic technology has been rapidly developed. But the original electrical and electronic technology can no longer match today's intelligent technology, but electronic technology is the basis of the development of modern intelligent technology. Therefore, the purpose of this paper is to use artificial intelligence technology to study the application of electrical engineering training and intelligent technology of electrical and electronic technology. After consulting the history of electrical engineering and the development, current situation and future development direction of electrical and electronic technology, this paper reviews the algorithms constructed by artificial intelligence and the basic operation of intelligent things. The improved adaptive parameter DBSCAN clustering algorithm is used to train electrical engineering and to make reference for the intelligence of electrical and electronic technology. The experimental results show that a good algorithm can speed up the training degree of electrical engineering and speed up the intelligent progress of electrical and electronic technology.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Electrical and Electronic Engineering"

1

Navaraj, William Ringal Taube. "Inorganic micro/nanostructures-based high-performance flexible electronics for electronic skin application." Thesis, University of Glasgow, 2019. http://theses.gla.ac.uk/40973/.

Full text
Abstract:
Electronics in the future will be printed on diverse substrates, benefiting several emerging applications such as electronic skin (e-skin) for robotics/prosthetics, flexible displays, flexible/conformable biosensors, large area electronics, and implantable devices. For such applications, electronics based on inorganic micro/nanostructures (IMNSs) from high mobility materials such as single crystal silicon and compound semiconductors in the form of ultrathin chips, membranes, nanoribbons (NRs), nanowires (NWs) etc., offer promising high-performance solutions compared to conventional organic materials. This thesis presents an investigation of the various forms of IMNSs for high-performance electronics. Active components (from Silicon) and sensor components (from indium tin oxide (ITO), vanadium pentaoxide (V2O5), and zinc oxide (ZnO)) were realised based on the IMNS for application in artificial tactile skin for prosthetics/robotics. Inspired by human tactile sensing, a capacitive-piezoelectric tandem architecture was realised with indium tin oxide (ITO) on a flexible polymer sheet for achieving static (upto 0.25 kPa-1 sensitivity) and dynamic (2.28 kPa-1 sensitivity) tactile sensing. These passive tactile sensors were interfaced in extended gate mode with flexible high-performance metal oxide semiconductor field effect transistors (MOSFETs) fabricated through a scalable process. The developed process enabled wafer scale transfer of ultrathin chips (UTCs) of silicon with various devices (ultrathin chip resistive samples, metal oxide semiconductor (MOS) capacitors and n‐channel MOSFETs) on flexible substrates up to 4" diameter. The devices were capable of bending upto 1.437 mm radius of curvature and exhibited surface mobility above 330 cm2/V-s, on-to-off current ratios above 4.32 decades, and a subthreshold slope above 0.98 V/decade, under various bending conditions. While UTCs are useful for realizing high-density high-performance micro-electronics on small areas, high-performance electronics on large area flexible substrates along with low-cost fabrication techniques are also important for realizing e-skin. In this regard, two other IMNS forms are investigated in this thesis, namely, NWs and NRs. The controlled selective source/drain doping needed to obtain transistors from such structure remains a bottleneck during post transfer printing. An attractive solution to address this challenge based on junctionless FETs (JLFETs), is investigated in this thesis via technology computer-aided design (TCAD) simulation and practical fabrication. The TCAD optimization implies a current of 3.36 mA for a 15 μm channel length, 40 μm channel width with an on-to-off ratio of 4.02x 107. Similar to the NRs, NWs are also suitable for realizing high performance e-skin. NWs of various sizes, distribution and length have been fabricated using various nano-patterning methods followed by metal assisted chemical etching (MACE). Synthesis of Si NWs of diameter as low as 10 nm and of aspect ratio more than 200:1 was achieved. Apart from Si NWs, V2O5 and ZnO NWs were also explored for sensor applications. Two approaches were investigated for printing NWs on flexible substrates namely (i) contact printing and (ii) large-area dielectrophoresis (DEP) assisted transfer printing. Both approaches were used to realize electronic layers with high NW density. The former approach resulted in 7 NWs/μm for bottom-up ZnO and 3 NWs/μm for top-down Si NWs while the latter approach resulted in 7 NWs/μm with simultaneous assembly on 30x30 electrode patterns in a 3 cm x 3 cm area. The contact-printing system was used to fabricate ZnO and Si NW-based ultraviolet (UV) photodetectors (PDs) with a Wheatstone bridge (WB) configuration. The assembled V2O5 NWs were used to realize temperature sensors with sensitivity of 0.03% /K. The sensor arrays are suitable for tactile e-skin application. While the above focuses on realizing conventional sensing and addressing elements for e-skin, processing of a large amount of data from e-skin has remained a challenge, especially in the case of large area skin. A Neural NW Field Effect Transistors (υ-NWFETs) based hardware-implementable neural network (HNN) approach for tactile data processing in e-skin is presented in the final part of this thesis. The concept is evaluated by interfacing with a fabricated kirigami-inspired e-skin. Apart from e-skin for prosthetics and robotics, the presented research will also be useful for obtaining high performance flexible circuits needed in many futuristic flexible electronics applications such as smart surgical tools, biosensors, implantable electronics/electroceuticals and flexible mobile phones.
APA, Harvard, Vancouver, ISO, and other styles
2

Galda, Alexey. "Electronic properties of Luttinger Liquid with electron-phonon interaction." Thesis, University of Birmingham, 2013. http://etheses.bham.ac.uk//id/eprint/4293/.

Full text
Abstract:
This thesis addresses a theoretical study of the problem of a single impurity embedded in a one-dimensional system of interacting electrons in presence of electron-phonon coupling. First we consider a system with a featureless point-like potential impurity, followed by the case of a resonant level hybridised with a Luttinger Liquid. The stress is made on a more fundamental problem of a featureless scatterer, for which two opposite limits in the impurity strength are considered: a weak scatterer and a weak link. We have found that, regardless of the transmission properties of phonons through the impurity, the scaling dimensions of the conductance in these limits obey the duality condition, \( \triangle_{WS}\) \( \triangle_{WL}\) = 1, known for the Luttinger Liquid in the absence of phonons. However, in the case when the strength of phonon scattering is correlated with electron scattering by the impurity, we find a nontrivial phase diagram with up to three fixed points and a possibility of a metal-insulator transition. We also consider the case of a weakly interacting electron-phonon system in the presence of a single impurity of an arbitrary scattering potential. In the problem of a resonant level attached to the Luttinger Liquid we show that the electron-phonon coupling significantly modifies the effective energy-dependent width of the resonant level in two different geometries, corresponding to the resonant and anti-resonant transmission in the Fermi gas.
APA, Harvard, Vancouver, ISO, and other styles
3

Larsson, Erik, and Niklas Kron. "Independent project in electrical engineering : Magnetic hand timepiece." Thesis, Uppsala universitet, Institutionen för teknikvetenskaper, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-325637.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Paine, Stephen Thomas. "Electronic countermeasures applied to passive radar." Doctoral thesis, Faculty of Engineering and the Built Environment, 2019. http://hdl.handle.net/11427/30945.

Full text
Abstract:
Passive Radar (PR) is a form of bistatic radar that utilises existing transmitter infrastructure such as FM radio, digital audio and video broadcasts (DAB and DVB-T/T2), cellular base station transmitters, and satellite-borne illuminators like DVB-S instead of a dedicated radar transmitter. Extensive research into PR has been performed over the last two decades across various industries with the technology maturing to a point where it is becoming commercially viable. Nevertheless, despite the abundance of PR literature, there is a scarcity of open literature pertaining to electronic countermeasures (ECM) applied to PR. This research makes the novel contribution of a comprehensive exploration and validation of various ECM techniques and their effectiveness when applied to PR. Extensive research has been conducted to assess the inherent properties of the lluminators of Opportunity to identify their possible weaknesses for the purpose of applying targeted ECM. Similarly, potential jamming signals have also been researched to evaluate their effectiveness as bespoke ECM signals. Whilst different types of PR exist, this thesis focuses specifically on ECM applied to FM radio and DVB-T2 based PR. The results show noise jamming to be effective against FM radio based PR where jamming can be achieved with relatively low jamming power. A waveform study is performed to determine the optimal jamming waveform for an FM radio based PR. The importance of an effective direct signal interference (DSI) canceller is also shown as a means of suppressing the jamming signal. A basic overview of counter-ECM (ECCM) is discussed to counter potential jamming of FM based PR. The two main processing techniques for DVB-T2 based PR, mismatched and inverse filtering, have been investigated and their performance in the presence of jamming evaluated. The deterministic components of the DVB-T2 waveform are shown to be an effective form of attack for both mismatched filtering and inverse filtering techniques. Basic ECCM is also presented to counter potential pilot attacks on DVB-T2 based PR. Using measured data from a PR demonstrator, the application and effectiveness of each jamming technique is clearly demonstrated, evaluated and quantified.
APA, Harvard, Vancouver, ISO, and other styles
5

Siebert, Wolfgang Peter. "Alternative electronic packaging concepts for high frequency electronics." Doctoral thesis, Stockholm, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-223.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lund, Richard. "Multilevel Power Electronic Converters for Electrical motor Drives." Doctoral thesis, Norwegian University of Science and Technology, Faculty of Information Technology, Mathematics and Electrical Engineering, 2005. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-687.

Full text
Abstract:

Power electronic converters are widely used in industrial power conversion systems both for utility and drives applications. As the power level increases, the voltage level is increased accordingly to obtain satisfactory efficiency. During the last years, the voltage rating of fast switching high voltage semiconductors such as the Insulated Gate Bipolar Transistor (IGBT) has increased. Still, there is a need for series connection of switching devices. In this area of applications, the Multilevel Converter has shown growing popularity.

The fundamental advantages of the Multilevel Converter topologies are low distorted output waveforms and limited voltage stress on the switching devices. The main disadvantages are higher complexity and more difficult control.

In this thesis, Multilevel Converters are analysed for large motor drive applications. The main focus has been on converter losses, output waveform quality and control.

Analytical expressions for both switching and conduction losses for 4- and 5-level Diode Clamped Converters have been developed. The investigation shows that the losses can be reduced by utilizing a multilevel topology for a 1 MW drive. This work is presented in [46]. The same reduction in losses is proven for a 2300V/ 3 MW drive.

Analytical expressions for the harmonic losses in 3-level converters have been developed for 2 different Carrier Based PWM schemes, presented in [56], [57] and [58]. Also Space Vector PWM are investigated and compared by simulations, in addition to 4- and 5-level Carrier Based PWM.

DC-bus balancing in both 3- and 5-level converters is discussed. Balancing in 3- level converters can be achieved by proper control. Balancing in 5-level converters can be achieved by proper arrangement of isolated DC-supplies.

One 40kW 3-level converter and one 5kW 5-level converter has been designed and built. Experimental verification of the analytical and simulated results is shown.

APA, Harvard, Vancouver, ISO, and other styles
7

Cavanaugh, Curtis. "AN ADAPTIVE ELECTRONIC INTERFACE FOR GAS SENSORS." NCSU, 2002. http://www.lib.ncsu.edu/theses/available/etd-20020108-121219.

Full text
Abstract:

CAVANAUGH, CURTIS C. An Adaptive Electronic Interface for Gas Sensors (Under the direction of H. Troy Nagle).This thesis focuses on the development of an adaptive electronic interface for gas sensors that are used in the NC State electronic nose. We present an adaptive electronic interface that allows for the accurate mapping of the sensor?s voltage output to sensor resistance profiles. The adaptive interface uses a linearized Wheatstone bridge in a constant current configuration. The balancing of the bridge and the adjustment of the subsequent gain stage is performed using programmable variable resistors. The programmable resistors are controlled by a LabVIEW® program. The same control program also determines and records all the resistor values in the interface circuit. The resistance of each sensor is accurately computed by LabVIEW® using the interface-circuit, resistor values, and the voltage output of the circuit. Compensating for sensor drift can be done in LabVIEW® by adjusting the programmable resistor values so that a zero-voltage output is produced during the reference cycle. By doing this zero adjustment between each ?sniff? of an odorant, the baseline drift can be minimized.A single channel of the adaptive electronic interface has been designed and tested. The interface can be calibrated so that it is 99% accurate when performing sensor resistance measurements.A new conducting polymer sensor chamber has also been designed and tested. The new radial flow sensor chamber was minimizes the dead volume in the chamber and also deliver the odorant to each sensor at the same time. Two operating modes were compared: continuous-flow and sniff-and-hold. Both modes gave good classification performance while testing four different coffee samples. Experimental testing indicates that sensor response is highly correlated with the sample flow rate. Future work to more fully characterize this correlation is recommended.

APA, Harvard, Vancouver, ISO, and other styles
8

Du, Toit J. A. (Jacques Andre). "Development and analysis of a distributed control strategy for power electronic converters." Thesis, Stellenbosch : Stellenbosch University, 2002. http://hdl.handle.net/10019.1/52761.

Full text
Abstract:
Thesis (PhD)--University of Stellenbosch, 2002.
ENGLISH ABSTRACT: The dissertation presents an alternative approach to the control of power electronic converters. The conventional approach is to use a centralized controller with one or more measurement systems providing feedback. As converters become larger, in both power rating and complexity, a number of drawbacks to this approach emerge. The number of physical data paths increases and voltage isolation becomes a problem. This has an adverse effect on the manufacturability as well as the reliable operation of the system as a whole. An alternative is to use a distributed control approach, where a number of smaller integrated control and measurement units are used. These units communicate with the central controller via a serial daisy-chain communications link. The dissertation investigates the design of such a controller as well as the application of distributed control in a number of emerging converter topologies. It was shown that centralized control has its limitations in modem power electronics in terms of reliability, maintainability and manufacturability. A feasible distributed control strategy was proposed and implemented and the operation was verified in an experimental converter system.
AFRIKAANSE OPSOMMING: Die proefskrif ondersoek 'n alternatiewe manier om drywings omsetters te beheer. Huidiglik word die meerderheid van omsetters beheer vanaf 'n sentrale beheereenheid, wat dan stelsel data versamel vanaf een of meer meetstelsels. Soos die drywingsvermoë van die omsetters toeneem, raak spannings isolasie en die aantal beheerseine 'n probleem, wat nadelig is vir die betroubaarheid en vervaardigbaarheid van die stelsel. As 'n alternatief, kan 'n aantal kleiner beheereenhede en meetstelsels gebruik word. Die beheerders kommunikeer met mekaar, sowel as die hoof stelselbeheerder deur middel van 'n optiese vesel netwerk, verbind in 'n ring struktuur. Die proefskrif ondersoek die ontwerp van die beheerder en die toepassing van gedesentraliseerde beheer in 'n aantal nuwe omsetter topologië. Die studie toon dat sentrale beheer problematies kan raak soos die omsetters meer kompleks raak. Die studie bewys dat 'n stelsel suksesvol bedryf kan word deur gebruik te maak van gedesentraliseerde beheer deur dit in 'n praktiese opstelling toe te pas.
APA, Harvard, Vancouver, ISO, and other styles
9

Valsalan, Rincy. "Electronic Water Heater." Thesis, Högskolan i Halmstad, Halmstad Embedded and Intelligent Systems Research (EIS), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-37922.

Full text
Abstract:
The main aim of my project is to develop a hardware implementation of the electronic waterheater by choosing different components and minimize the errors in the same. I have consideredseveral options depending on the availability of components, cost, reliability, implementation,financial budget, specification and thinking about the professional technical skills required. Inthis project I designed and implemented, an AVR micro controller based water temperaturemeasurement system using Atmega328p microcontroller.The idea of the project came from a company called Relek production AB, Sweden and theydevelop and supply electrical equipment for heating: such as electric boilers, under floor heatingboilers, IR heaters, emergency power plants, power monitors, etc. Now they want to develop anew version of electronic water heater and according to their specification.The microcontroller (Atmega328p) based temperature control system is used in this project forproviding better functioning of the system and will also serve the following purposes.1) As there will be less usage of energy as it is more energy efficient.2) The microcontroller along with temperature sensor decides when the heater shouldturn on/off.With this project I have designed the schematic diagram by using Eagle Autodesk PCB CADprogram. The seven-segment display is used in this project to show the current temperature. Atemperature sensor (LM35) is used in this project to sense the temperature and give thesemeasured values to the microcontroller. The temperature measurement and heater control areprocessed using C++ program.I have connected the circuit as per the schematic diagram and programed the microcontroller,interfacing all the major components like 7 segment display, temperature sensor, 2 pushbuttons(for manually incrementing and decrementing the set point in the program), and optoisolator (tosense the output from microcontroller and control the heater through thyristor).
APA, Harvard, Vancouver, ISO, and other styles
10

Ahmadi, Teshnizi Amir Pouya, Marcus Hellström, Tom Bärnheim, and Hassan Soltani. "IoT Air Quality Sensor Array : Master's Programme in Electrical Engineering." Thesis, Uppsala universitet, Institutionen för elektroteknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-448142.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Electrical and Electronic Engineering"

1

Warnes, Lionel. Electronic and Electrical Engineering. London: Macmillan Education UK, 1998. http://dx.doi.org/10.1007/978-1-349-15052-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Warnes, Lionel. Electronic and Electrical Engineering. London: Macmillan Education UK, 2003. http://dx.doi.org/10.1007/978-0-230-21633-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Warnes, L. A. A. Electronic and Electrical Engineering. London: Macmillan Education UK, 1994. http://dx.doi.org/10.1007/978-1-349-13012-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Jewel and Esk Valley College. Electrical & electronic engineering courses. [Dalkeith]: Jewel & Esk Valley College, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Electrical & electronic systems. Harlow, England: Pearson Education LTD, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

W, Whitehead R., Bolton W. 1933-, and Bell E. C, eds. Basic electrical and electronic engineering. 4th ed. Oxford: Blackwell Scientific Publications, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Electrical and electronic engineering principles. Harlow: Longman, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Coyne, M. A. Subcontracting in electrical & electronic engineering. Leicester: Leicester Polytechnic, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Electrical and electronic principles 3. 2nd ed. London: Heinemann Professional Publishing, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Fundamental electrical and electronic principles. 3rd ed. Oxford: Elsevier/Newnes, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Electrical and Electronic Engineering"

1

Livesey, Andrew. "Electrical and electronic systems." In Practical Motorsport Engineering, 222–51. First edition. | Abingdon, Oxon : Routledge/Taylor & Francis, 2019.: Routledge, 2018. http://dx.doi.org/10.1201/9781351239189-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Livesey, Andrew. "Electrical and Electronic Principles." In T Level Engineering, 177–92. London: Routledge, 2023. http://dx.doi.org/10.1201/9781003284833-10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Howe, Alan. "Electrical and Electronic Systems." In Introduction to Mechanical Engineering, 385–543. 2nd ed. London: CRC Press, 2022. http://dx.doi.org/10.1201/9780429319167-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Livesey, Andrew. "Motorcycle electrical and electronic systems." In Motorcycle Engineering, 197–212. Abingdon, Oxon ; New York, NY : Routledge, 2021.: Routledge, 2021. http://dx.doi.org/10.1201/9780367816858-11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Carroll E. Goering, Marvin L. Stone, David W. Smith, and Paul K. Turnquist. "ELECTRICAL AND ELECTRONIC SYSTEMS." In Off-Road Vehicle Engineering Principles, 205–54. St. Joseph, MI: American Society of Agricultural and Biological Engineers, 2003. http://dx.doi.org/10.13031/2013.13669.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Soares, Edmundo R., Samuel Cabete, Nuno Miguel Fonseca Ferreira, and Fernando J. T. E. Ferreira. "Electronic Nose." In Lecture Notes in Electrical Engineering, 689–95. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-10380-8_66.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

N. Makarov, Sergey, Reinhold Ludwig, and Stephen J. Bitar. "Electronic Diode and Diode Circuits." In Practical Electrical Engineering, 795–849. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-21173-2_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Warnes, Lionel. "Power electronics." In Electronic and Electrical Engineering, 347–65. London: Macmillan Education UK, 1998. http://dx.doi.org/10.1007/978-1-349-15052-6_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Warnes, Lionel. "Power electronics." In Electronic and Electrical Engineering, 350–68. London: Macmillan Education UK, 2003. http://dx.doi.org/10.1007/978-0-230-21633-4_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Warnes, L. A. A. "Power electronics." In Electronic and Electrical Engineering, 334–53. London: Macmillan Education UK, 1994. http://dx.doi.org/10.1007/978-1-349-13012-2_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Electrical and Electronic Engineering"

1

Leão, Celina P., Filomena Soares, Anabela Guedes, M. Teresa Sena Esteves, Gustavo Alves, Isabel M. Brás Pereira, Romeu Hausmann, and Clovis Antonio Petry. "Freshman's perceptions in electrical/electronic engineering courses." In the 3rd International Conference. New York, New York, USA: ACM Press, 2015. http://dx.doi.org/10.1145/2808580.2808634.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Dunai, Larisa Dunai, Ismael Lengua Lengua, Guillermo Peris Fajarnes, and Beatriz Defez Garcia. "Learning electrical and electronic engineering with multidisciplinary projects." In IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2019. http://dx.doi.org/10.1109/iecon.2019.8926718.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wang, Shibing, Yashuai Yang, and Jing Wang. "Introducing Memristor to Electrical and Electronic Engineering Undergraduates." In 2016 International Conference on Education, Sports, Arts and Management Engineering. Paris, France: Atlantis Press, 2016. http://dx.doi.org/10.2991/icesame-16.2016.23.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

"Electronic." In 2012 20th Iranian Conference on Electrical Engineering (ICEE). IEEE, 2012. http://dx.doi.org/10.1109/iraniancee.2012.6292626.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Pronsawatchai, Parichart, Suchitra Auefuea, Adisak Nartthanarung, and Pichitpong Soontornpipit. "Design of the Electronic Consultation System: Rama Health Electronic Consulting." In 2018 International Electrical Engineering Congress (iEECON). IEEE, 2018. http://dx.doi.org/10.1109/ieecon.2018.8712302.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sinche, Soraya, Fernando Carrera, Pablo Lupera, Jackeline Abad, and Jaime Cepeda. "Preface of the XXXI Conference on Electrical and Electronic Engineering." In Conference on Electrical and Electronic Engineering. Basel Switzerland: MDPI, 2024. http://dx.doi.org/10.3390/engproc2023047025.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Morley, D. "Project Squared [best practice for electrical/electronic engineering education]." In IEE 2nd Annual Symposium on Engineering Education. IEE, 2002. http://dx.doi.org/10.1049/ic:20020095.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

"Electrical engineering & automation." In 2015 IEEE NW Russia Young Researchers in Electrical and Electronic Engineering Conference (EIConRusNW). IEEE, 2015. http://dx.doi.org/10.1109/eiconrusnw.2015.7102298.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

"Electrical engineering & automation." In 2016 IEEE NW Russia Young Researchers in Electrical and Electronic Engineering Conference (EIConRusNW). IEEE, 2016. http://dx.doi.org/10.1109/eiconrusnw.2016.7448225.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bonnaud, Olivier. "Growing Demand of Educators in Electrical and Electronic Engineering." In 2007 IEEE Meeting the Growing Demand for Engineers and their Educators 2010-2020 International Summit. IEEE, 2007. http://dx.doi.org/10.1109/mgdete.2007.4760375.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Electrical and Electronic Engineering"

1

Walters, E. Jane. Center for electronic and electrical engineering :. Gaithersburg, MD: National Bureau of Standards, 1985. http://dx.doi.org/10.6028/nbs.ir.85-3181.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Walters, E. Jane. Center for electronic and electrical engineering :. Gaithersburg, MD: National Bureau of Standards, 1985. http://dx.doi.org/10.6028/nbs.ir.85-3181-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gonzalez, J. A. Electronics and Electrical Engineering Laboratory:. Gaithersburg, MD: National Institute of Standards and Technology, 1992. http://dx.doi.org/10.6028/nist.ir.4803.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Gonzales, J. A. Electronics and Electrical Engineering Laboratory:. Gaithersburg, MD: National Institute of Standards and Technology, 1992. http://dx.doi.org/10.6028/nist.ir.4850.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gonzalez, J. A. Electronics and Electrical Engineering Laboratory:. Gaithersburg, MD: National Institute of Standards and Technology, 1992. http://dx.doi.org/10.6028/nist.ir.4929.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Rohrbaugh, J. M. Electronics and Electrical Engineering Laboratory:. Gaithersburg, MD: National Institute of Standards and Technology, 1995. http://dx.doi.org/10.6028/nist.ir.5607.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Rohrbaugh, J. M. Electronics and Electrical Engineering Laboratory:. Gaithersburg, MD: National Institute of Standards and Technology, 1995. http://dx.doi.org/10.6028/nist.ir.5608.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Rohrbaugh, J. M. Electronics and Electrical Engineering Laboratory:. Gaithersburg, MD: National Institute of Standards and Technology, 1995. http://dx.doi.org/10.6028/nist.ir.5669.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Rohrbaugh, J. M. Electronics and Electrical Engineering Laboratory:. Gaithersburg, MD: National Institute of Standards and Technology, 1995. http://dx.doi.org/10.6028/nist.ir.5709.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Rohrbaugh, J. M. Electronics and Electrical Engineering Laboratory:. Gaithersburg, MD: National Institute of Standards and Technology, 1995. http://dx.doi.org/10.6028/nist.ir.5773.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Electrical and Electronic Engineering' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography