Dissertations / Theses on the topic 'Electric stoves'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 dissertations / theses for your research on the topic 'Electric stoves.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
Savage, Lydia Yvonne. "A buyer's guide for range cooktops and microwave ovens." Diss., Virginia Tech, 1991. http://hdl.handle.net/10919/39131.
Full textFahey, Mark, and n/a. "Assessment of the suitability of CFD for product design by analysing complex flows around a domestic oven." University of Otago. Department of Design Studies, 2007. http://adt.otago.ac.nz./public/adt-NZDU20070417.111809.
Full textYoung, Betty S. "A cost analysis of the ownership and use of traditional and innovative cooking appliances." Diss., Virginia Polytechnic Institute and State University, 1988. http://hdl.handle.net/10919/54474.
Full textPh. D.
Forbes, Keith. "Calibration, recognition, and shape from silhouettes of stones." Doctoral thesis, University of Cape Town, 2007. http://hdl.handle.net/11427/8903.
Full textMulti-view shape-from-silhouette systems are increasingly used for analysing stones. This thesis presents methods to estimate stone shape and to recognise individual stones from their silhouettes. Calibration of two image capture setups is investigated. First, a setup consisting of two mirrors and a camera is introduced. Pose and camera internal parameters are inferred from silhouettes alone. Second. the configuration and calibration of a high throughput multi-camera setup is covered. Multiple silhouette sets of a stone are merged into a single set by inferring relative poses between sets. This is achieved by adjusting pose parameters to maximise geometrical consistency specified by the epipolar tangency constraint. Shape properties (such as volume, flatness, and eiongation) are inferred more accurately from the merged silhouette sets than from the original silhouette sets. Merging is used to recognise individual stones from pairs of silhouette sets captured on different occasions. Merged sets with sufficient geometrical consistency are classified as matches (produced by the same stone), whereas inconsistent sets are classified as mismatches. Batch matching is determining the one-to-one correspondence between two unordered batches of silhouette sets of the same batch of stones. A probabilistic framework is used to combine recognition by merging (which is slow, but accurate) with the efficiency of computing shape distribution-based dissimilarity values. Two unordered batches of 1200 six-view silhouette sets of uncut gemstones are correctly matched in approximately 68 seconds (using a 3.2 GHz Pentium 4 machine]. An experiment that compares silhouette-based shape estimates with mechanical sieving demonstrates an application using the developed methods. A batch of 494 garnets is sieved 15 times. After each sieving, silhouette sets are captured for sub-batches in each bin. Batch matching is used to determine the IS sieve bins per stone. Better estimates of repeatability, and better understanding of the variability of the sieving process is obtained than if only histograms (the natural output of sieving) were considered. Silhouette-based sieve emulation is found to be more repeatable than mechanical sieving.
Khurshid, Hassan. "High-order incompressible Navier-stokes equations solver for blood flow." Wichita State University, 2012. http://hdl.handle.net/10057/5520.
Full textThesis (Ph.D.)--Wichita State University, College of Engineering, Dept. of Aerospace Engineering
Weber, Daniel J. M. Eng Massachusetts Institute of Technology. "Design of a battery-powered induction stove." Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/100618.
Full textThis electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
Cataloged from student-submitted PDF version of thesis.
Includes bibliographical references (pages 52-53).
Many people in the developing areas of the world struggle to cook with stoves that emit hazardous fumes and contribute to green house gas emissions. Electric stoves would alleviate many of these issues, but significant barriers to adoption, most notably lack of reliable electric power, make current commercial options infeasible. However, a stove with an input power of 24V DC elegantly solves the issue of intermittent power by allowing car batteries to be used instead of a grid connection, while also allowing seamless integration with small scale solar installations and solar-based micro-grids. However, no existing commercial stoves nor academic research have attempted to create an induction stove powered from a low voltage DC source. This paper presents the design of a low voltage current-fed, full-bridge parallel resonant converter stove. The dynamics of this new topology are discussed in detail and simulations are provided to analyze the behavior. Additionally, a practical implementation of a 500W - 1 kW stove is described. This stove is the first of it's kind and represents a new contribution to both the field of induction cooking and the field of clean cooking solutions for the developing world.
by Daniel J. Weber.
M. Eng.
Lanford, Patricia. "A model for building trustworthiness in online stores." Auburn, Ala., 2007. http://repo.lib.auburn.edu/07M%20Dissertations/LANFORD_PATRICIA_43.pdf.
Full textColgrove, Matthew Edward. "Querying Geographically Dispersed, Heterogeneous Data Stores: The PPerfXchange Approach." PDXScholar, 2002. https://pdxscholar.library.pdx.edu/open_access_etds/2665.
Full textViltapuram, Naresh Goud. "Reynolds-averaged Navier-Stokes simulations over a protrusion using a Spalart-Allmaras turbulence model." Thesis, Wichita State University, 2012. http://hdl.handle.net/10057/5613.
Full textThesis (M.S.)--Wichita State University, College of Engineering, Dept. of Aerospace Engineering
Gothan, Alida. "A critical appraisal of the customer service and service quality in appliance sales departments in prominent South African retail stores." Pretoria : [s.n.], 2009. http://upetd.up.ac.za/thesis/available/etd-11122009-165630.
Full textMARCHESAN, DOMENICO. "ELECTRONIC STRUCTURE THEORY CALCULATIONS OF MOLECULAR PROPERTIES." Doctoral thesis, Università degli studi di Trieste, 2005. http://thesis2.sba.units.it/store/handle/item/13198.
Full textMira, da Silva Miguel Leitão Bignolas. "Models of higher-order, type-safe, distributed computation over autonomous persistent object stores." Thesis, University of Glasgow, 1996. http://theses.gla.ac.uk/2689/.
Full textNugawela, Saliya. "Data warehousing model for integrating fragmented electronic health records from disparate and heterogeneous clinical data stores." Thesis, Queensland University of Technology, 2013. https://eprints.qut.edu.au/60880/1/Saliya_Nugawela_Thesis.pdf.
Full textHanna, Sherif Fayez. "Electronic resonance enhanced coherent anti-Stokes Raman scattering technique for detection of combustion species and biological molecules." Texas A&M University, 2005. http://hdl.handle.net/1969.1/4379.
Full textRukuni, Tarisai Fritz. "Electronic service quality and customer satisfaction in South African online stores: The role of psychographics on perceptions." University of the Western Cape, 2018. http://hdl.handle.net/11394/6805.
Full textIn recent years, the South African online shopping industry has experienced remarkable growth which has attracted multi-national online stores to operate in the South African market thus creating competitive pressure for domestic online stores. Consequently, this presence of competition from well-resourced and recognisable online store brands it is critical that domestic online stores adopt measures to protect their competitive positions and to pursue competitive advantage. An adoption of a customer-centred approach focused on increasing customer satisfaction is one strategy for online stores to consider. This study had as its primary objective to develop a theoretical model of psychographic influences on customer satisfaction with electronic service quality. The associated objectives were to develop a theoretical model to (i) assess online shopping customers’ perceptions of electronic service quality, (ii) illustrate the effect of electronic service quality on customer satisfaction, (iii) measure the effect of customer satisfaction on customer behavioural intentions, and (iv) determine how customers’ perceptions of electronic service quality differ across different customer psychographic profiles. A quantitative descriptive cross sectional study was conducted to address the research objectives. Data was collected through a questionnaire from a sample of 344 South African online store customers. Statistical descriptive and inferential analyses were performed including mean values, structural equation modelling and analysis of variance. The findings included that, i) customers have negative perceptions of electronic service quality in South African online stores, ii) the constructs of electronic service quality, efficiency and contact, have a significant positive effect on customer satisfaction, iii) customer satisfaction has a significant positive effect on customer behavioural intentions, and iv) a significant difference in the perceptions of electronic service quality was found to exist among customers with different psychological profiles. Based on the study findings it is recommended that South African online stores should improve electronic service quality and apply market segmentation on the basis of customer psychological profiles in order to gain competitive advantage.
VERONESE, MARCO. "ELECTRONIC AND MAGNETIC PROPERTIES OF IMPURITIES AND CLUSTERS ON METAL SURFACES." Doctoral thesis, Università degli studi di Trieste, 2004. http://thesis2.sba.units.it/store/handle/item/12556.
Full textLa struttura elettronica ed il magnetismo di atomi singoli e impurezze di metalli di transizione deposti su superfici metalliche sono stati studiati per mezzo di tecniche dicroiche di assorbimento dei raggi X (XMCD) e misure di magnetizzazione, in alti campi magnetici ed a temperature criogeniche. Le caratteristiche uniche delle XMCD nell'investigare sia momenti magnetici di spin che orbitali con selettività chimica sono state applicate a sistemi estremamente diluiti, con concentrazione di superficie dell'ordine di 1012 atomi cm-2 , fino al limite di atomi isolati. Questo genere di misure è stato applicato ai sistemi di impurezze di superficie soltanto in ultimi anni grazie alla disponibilità di sorgenti di radiazione di sincrotrone di elevata brillanza. Ad oggi queste misure rappresentano un esempio di punta nello studio sul magnetismo delle impurezze di superficie. l risultati sono riportati per tre gruppi di sistemi: Impurezze di V e Mn sulla superficie dei metalli alcalini (Cs, K, Na); atomi isolati di Mn, V, Fe, Co sulla superficie Cu(100) ed atomi isolati di Co su Pt(111 ).Inoltre è presentato uno studio della distribuzione dei momenti magnetici di uno strato monoatomico di manganese accoppiato alla superficie Fe(1 00). Il manganese su potassio è stato indicato possedere una configurazione elettronica simile a quella atomica d5 . Questa configurazione elettronica è particolarmente stabile per i piccoli cambiamenti di ibridazione indotti dal cambiamento della densità elettronica nei dai metalli alcalini. Se l'ibridazione è ulteriormente aumentata come nel caso di atomi di M n deposti su Al(1 00) le caratteristiche spettroscopiche che si evidenziano in strutture di multipletti atomici negli spettri sono soppresse e con esse il magnetismo. Le impurezze di vanadio sulle superfici alcaline mostrano una configurazione elettronica che non più così simile a quella degli atomi liberi, come ad esempio le configurazioni d o d4 .11 momento orbitale è trovato essere piccolo, minore di 0.5 f.ls, rispetto al momento orbitale delle configurazioni puramente atomiche, ma in similitudine con esse è allineato antiparallelamente al momento di spin. Inoltre il momento orbita le diminuisce risalendo lungo la colonna dei metalli alcalini (gruppo 1 A della tabella periodica degli elementi), cioè andando dal Cs al Li, mentre la densità elettronica è aumentata. Questo effetto è legato all'aumento dell'ibridazione dovuta alla maggiore densità elettronica. l momenti magnetici misurati sono dell'ordine di 3 f.ls e non possono essere spiegati con parametri puramente atomici. Due meccanismi possibili vengono proposti per spiegare l'estinzione parziale del momento orbitale: l'effetto di un debole campo cristallino e l'effetto dell'ibridazione in concomitanza con maggiore larghezza dello stato regato di Friedel nel caso dei primi elementi della serie dei metallo di transizione 3d. Gli atomi isolati di Fe sulla superficie del Cu(1 00) mostrano una grande anisotropia magnetica, di 1,5 me V/atomo ed un momento magnetico orbitale aumentato rispetto al Fedi volume. Il substrato di Cu non contribuisce considerevolmente all'anisotropia come nel caso del Co su platino. All'opposto gli atomi isolati di Co su Cu(100) non mostrano alcuni dicroismo e quindi alcun magnetismo. Questo risultato è spiegato in termini di effetto Kondo, poiché i singoli atomi di Co sono stati trovati per essere un sistema di Kondo con T K=88 K. Un confronto dei dati sperimentali per impurezze di V, M n, Fe e Co su Cu(1 00) con il comportamento magnetico calcolato dei adatomi lungo la serie 3d, mostra un buon accordo generale, ma con deviazioni importanti per le impurezze di Co e di V. Atomi singoli atomi di Co sulla superficie del Pt(111) hanno una straordinaria anisotropia magnetica di circa 9,2 meV/atomo (circa 1000 volte quella del Co di volume) ed ad oggi la più alta energia di anisotropia magnetica misurata per un sistema magnetico. L'origine di un effetto cosi' grande risiede in un momento orbitale aumentato dalla ridotta coordinazione del singolo atomo, alla rottura di simmetria sulla superficie ed all'effetto dell'ibridazione del platino, conseguenza di un mescolamento di stati 3d-5d tra Co ePt, che porta il substrato a contribuire all'anisotropia magnetica totale.
The electronic structure and the magnetism of transition metal single atoms and magnetic impurities on metal surfaces have been studied by means of x-ray absorption dichroic techniques (XMCD, and magnetization measurements) in high magnetic fields and at low temperatures. The unique capabilities of XMCD to probe the both spin and orbital magnetic moments with element selectivity have been applied to diluted systems with low surface concentration (1012 atoms cm-2 ) down to the limit of isolated atoms. This kind of measurements have been applied to surface impurity systems only in the last few year thanks to the availability of high flux and brilliance synchrotron radiation sources. At the present these measurements represent the state of the art in the study of the magnetism of surface impurities. Results are reported for three different classes of systems: Mn and V impurities on the surface of alkali metals (Cs, K, N a); M n, V, Fe, Co single atoms on the Cu(1 00) surface an d Co single atoms on the Pt(111) surface. Furthermore results have been presented, regarding the magnetic moment distribution of a Mn monolayer coupled to the Fe(1 00) surface. Manganese on potassium has been shown to possess an atomic like magnetic d5 electronic configuration. This electronic configuration is particularly stable for small hybridization changes induced by alkali metals of increased electronic density. lf the hybridization is further increased as on Al(100) the spectroscopic features related to atomic multiplets are suppressed together with magnetism. Vanadium impurities on alkali metal surfaces also show atomic multiplet features. The electronic configuration is not an atomic-like configuration as d3 or d4 . The orbital moment is found to be small, less than 0.5 !-ls with respect to the purely atomic configurations and to be antiparallel to the spin. lt decreases along the alkali metals column (group 1A) of the periodic table, as the electronic density is increased, i.e. going from Cs to Li. This effect is related to an increased hybridization with the substrate due to the larger electronic density. The measured magnetic moments are of the order of 3)-ls, and cannot be explained with simple atomic parameters. Two possible mechanisms have been proposed to explain the partial quenching of the orbital moment, the effect of a weak crystal field and the effect of hybridization through the larger width of Friedel resonant bound state for the early elements of 3d transition metal series. Fe single atoms on Cu(100) surface have a large ot1f of plane magnetic anisotropy of 1.5 meV/atom and enhanced orbital magnetic moment with the respect to the bulk. The Cu substrate does not contribute considerably to the anisotropy as in the case of Co o n Pt. At the apposite Co single atoms on Cu(1 00) surface do not show any dichroism an d hence magnetism. This result ca n be explained on the basis of the Kondo effect, since Co single atoms have been found to be a Kondo system with T K=88 K. A comparison of the experimental data for V, Mn, Fe, Co impurities on Cu(100) with the calculated magnetic behavior of adatoms along the 3d series, gives an overall reasonable agreement, with important deviations for V and Co impurities. Co single atoms on the Pt(111) surface have an extraordinary large out of plane magnetic anisotropy of about 9.2 meV/atom due to the interplay between an enhanced orbital moment, consequence reduced coordination of the single atom, at the surface, and the effect of Pt hybridization, consequence of a d-d mixing between Co and Pt orbitals. This result is of particular relevance since this magnetic anisotropy is the highest measured, by now, for any system.
XVI Ciclo
1971
Versione digitalizzata della tesi di dottorato cartacea.
Pravica, Luka. "Polarised electron studies of spin-dependent interactions in zinc and krypton atoms." University of Western Australia. School of Physics, 2006. http://theses.library.uwa.edu.au/adt-WU2006.0063.
Full textPRIJON, MAJDA. ""ELECTRONIC DATA INTERCHANGE" NELL'ORGANIZZAZIONE DEL SISTEMA PORTUALE. IL CASO DEI PORTI DELL'ALTO ADRIATICO." Doctoral thesis, Università degli studi di Trieste, 1997. http://thesis2.sba.units.it/store/handle/item/12986.
Full textNarayan, Chaya. "Polarimetric Stokes Imaging for the Detection of Tumor Margins and Segmentation." University of Akron / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=akron1386785379.
Full textKauffman, Lukis. "From our circus family, to yours." View electronic thesis (PDF), 2009. http://dl.uncw.edu/etd/2009-1/rp/kauffmanl/lukiskauffman.pdf.
Full textConrad, Tim. "The machine we trust and other stories." View electronic thesis (PDF), 2009. http://dl.uncw.edu/etd/2009-1/rp/conradt/timconrad.pdf.
Full textHarvey, Jonathan Paul. "The evaluation and development of electric fishing gears and sampling strategies for the assessment of fish stocks in large water bodies." Thesis, University of Hull, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.361492.
Full textDI, TOMMASO DEVIS. "APPLICATION AND DEVELOPMENT OF THE LINEAR COMBINATION OF ATOMIC ORBITALS B-SPLINE DENSITY FUNCTIONAL THEORY METHOD FOR THE MOLECULAR ELECTRONIC CONTINUUM." Doctoral thesis, Università degli studi di Trieste, 2006. http://thesis2.sba.units.it/store/handle/item/13234.
Full textLo scopo della presente tesi è l'applicazione e lo sviluppo del metodo LCAO B-spline DFT, basato sulla Combinazione Lineare degli Orbitali Atomici (LCAO), sulla Teoria del Funzionale Densità (DFT) e sull'impiego delle funzioni di base Bspline, per lo studio della fotoionizzazione molecolare. Nel Capitolo 1 viene considerata una breve introduzione al processo di fotoionizzazione e alla teoria della fotoionizzazione molecolare. Nel Capitolo 2 vengono presentati i metodi computazionali utilizzati durante il presente lavoro di tesi. I risultati ottenuti sono presentati nei successivi Capitoli della tesi. Il lavoro è suddiviso in tre parti. Nella prima parte (Capitoli 3-6) il metodo LCAO B-spline DFT è applicato allo studio del Dicroismo Circolare nella Distribuzione Angolare (CDAD) dei fotoelettroni emessi da molecole chirali, ionizzate da luce circolarmente polarizzata di definita elicità. Un primo studio computazionale sull'effetto CDAD è focalizzato su una serie di derivati chirali dell'ossirano, con lo scopo di identificare tendenze lungo la serie molecolare. I risultati evidenziano una inaspettata sensibilità da parte del dicroismo circolare verso cambiamenti nella struttura elettronica molecolare. Inoltre i valori calcolati sottolineano come lintensità dell'effetto CD AD è da attribuire non tanto alla chiralità dello stato iniziale, ma bensì alla capacità della funzione d'onda del fotoelettrone (completamente delocalizzata su tutta la molecola) di sondare l'asimmetria nel potenziale molecolare effettivo. Il metodo LCAO B-spline DFT è quindi applicato allo studio del dicroismo circolare nella distribuzione angolare dei fotoelettroni emessi dai livelli di core e di valenza degli enantiomeri della canfora. I risultati sono confrontati con i valori calcolati attraverso l'approccio Continuum Multiple Scattering: i due metodi teorici mostrano un sostanziale accordo nei risultati. Inoltre, un confronto dei risultati calcolati con i dati sperimentali disponibili mostra un accordo sostanziale se non addirittura quantitativo. E' inoltre presentato uno studio teorico e sperimentale sul dicroismo circolare nella distribuzione angolare dei fotoelettroni emessi dai livelli di valenza del 3- idrossitetraidrofurano, il quale è una molecola relativamente flessibile. Questo lavoro mette luce su nuove caratteristiche del dicroismo in fotoemissione, il quale appare molto sensibile a fattori di tipo conformazionale. L'influenza degli effetti conformazionali sui parametri dinamici di fotoionizzazione, con particolare attenzione all'effetto CDAD, è quindi investigata in dettaglio. Il metodo LCAO E-spline DFf è applicato ai conformeri della molecola (1R,2R)-1,2-dibromo-1,2-dicloro-1,2-difluoroetano. Il parametro dicroico mostra una significativa sensibilità verso il conformero della molecola. Ciò suggerisce che il profilo energetico del parametro dicroico potrebbe essere utilizzato come un fingerprint dei conformeri di una molecola chirale. Il metodo computazionale è anche applicato alla rotazione del metile nella molecola (S)-ossirano, in modo da verificare l'assunzione che la rotazione del metile non influisca in maniera significativa sui valori calcolati dell'effetto CDAD. Si verifica invece come la rotazione del gruppo metile provochi variazioni inaspettate e drammatiche sul profilo del parametro dicroico. La seconda parte del lavoro (Capitolo 7) riguarda l'investigazione teorica sulla correttezza dell'assunzione che il Eranching Ratio nella ionizzazione dei livelli di core di siti atomici chimicamente diversi dello stesso elemento, segua il rapporto statistico. Il metodo LCAO E-spline DFT è stato impiegato per calcolare in maniera accurata le sezioni d'urto associate alla ionizzazione degli orbitali ls dei carboni per un set di molecole organiche scelte. I risultati mostrano che deviazioni nella sezione d'urto inducono forti andamenti non statistici da parte dei Eranching Ratios relativi alla ionizzazione dei livelli core, fino a diversi e V sopra la soglia di ionizzazione. La parte finale della tesi (Capitolo 8) riguarda il problema delle shape resonances. La razionalizzazione delle strutture risonanti, spesso presenti nello spettro molecolare del continuo, è un problema ampiamente discusso. Nel presente lavoro una nuova metodologia per localizzare e caratterizzare in termini molecolari le shape resonances viene proposta. Partendo da un sistema modello, è stato sviluppato un metodo per caratterizzare le risonanze in termini di contributo da parte degli orbitali virtuali di valenza. Il metodo sviluppato è quindi esteso al caso molecolare ed applicato alla localizzazione e caratterizzazione delle shape resonances che appaiono nella fotoionizzazione dei livelli crg di core e di valenza di N1.
XVIII Ciclo
1977
Versione digitalizzata della tesi di dottorato cartacea.
Fratus, Brian J. "Rational asset pricing : book-to-market equity as a proxy for risk in utility stocks /." Thesis, This resource online, 1994. http://scholar.lib.vt.edu/theses/available/etd-11242009-020322/.
Full textGarcia, Elda Aimee Perez. "Stock price reaction to merger and acquisiton [i.e. acquisition]." View electronic thesis, 2008. http://dl.uncw.edu/etd/2008-3/r3/garciae/eldagarcia.pdf.
Full textPrabhaker, Sumanth. "Village of cults /." Electronic version (PDF), 2007. http://dl.uncw.edu/etd/2007-3/prabhakers/sumanthprabhaker.pdf.
Full textMorscheck, Justin David. "Overreaction in trading : evidence from the intraday trading of SPDRs /." abstract and full text PDF (UNR users only), 2008. http://0-gateway.proquest.com.innopac.library.unr.edu/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:1461538.
Full text"December, 2008." Includes bibliographical references (leaves 23-24). Library also has microfilm. Ann Arbor, Mich. : ProQuest Information and Learning Company, [2009]. 1 microfilm reel ; 35 mm. Online version available on the World Wide Web.
Petermann, Jeff C. "Design of a Fully Automated Polarimetric Imaging System for Remote Characterization of Space Materials." University of Akron / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=akron1329101390.
Full textThiébaud, Esther Verfasser], and Martin [Akademischer Betreuer] [Faulstich. "Critical metals in electronic equipment: a methodology to model end-user stocks and flows / Esther Thiébaud ; Betreuer: Martin Faulstich." Clausthal-Zellerfeld : Technische Universität Clausthal, 2018. http://d-nb.info/123136419X/34.
Full textNgo, Hoa Thanh. "Prayers for imperfection /." free to MU campus, to others for purchase, 2002. http://wwwlib.umi.com/cr/mo/fullcit?p3060128.
Full textTatavalli, Mittadar Nirmal. "Design and implementation of a multi-block parallel algorithm for solving Navier-Stokes equations on structured grids." Thesis, Mississippi State : Mississippi State University, 2002. http://library.msstate.edu/etd/show.asp?etd=etd-05022002-170458.
Full textRoux, Brian. "Application of Digital Forensic Science to Electronic Discovery in Civil Litigation." ScholarWorks@UNO, 2012. http://scholarworks.uno.edu/td/1554.
Full textBrugés, Javier Mauricio. "Surface characterization methods for quality assessment of polyethylene-coated paperboard." Licentiate thesis, Mittuniversitetet, Institutionen för elektronikkonstruktion, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-41710.
Full textDrury, Brendan E. "Put me in coach : surviving the bench and the locker room in adolescent basketball literature /." Electronic version (PDF), 2005. http://dl.uncw.edu/etd/2005/druryb/brendandrury.pdf.
Full textHsieh, Sung Ling, and 謝松齡. "A Study on Electronic Word-of-Mouth Management of Online Stores: Online Cosmetic Stores." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/79717110486115808908.
Full text國立政治大學
科技管理研究所
95
Entering Web 2.0, online shoppers are more used to search product information before purchasing and share their comments after shopping. The MIC survey indicates that over 70% of online shoppers will explore the comments of others before purchasing and be affected. This shows that electronic Word-of-Mouth (eWOM) has a great influence on customers’ purchasing decision and worthy watching. Cosmetic in online stores could not be trail before purchasing, which is contrary to its experice quality product characters and lead to the booming of cosmetic community sites. In addition, many of the online cosmetic websites include the function called “True Story” to encourage customers share their experiences after using products, which means online cosmetic stores already know the power of eWOM and start to apply it in business operation. Even the influence and application of eWOM are already been proven, there are only still little researches relate to eWOM management. This study built a systematic structure to find the motivation and process for eWOM management of online cosmetic stores, tried to identify the context of this vague but important issue. The study aims to investigate the following questions: 1. What are the motivations for online cosmetics stores to manage eWOM? 2. How do they monitor eWOM? 3. How do they respond to eWOM? 4. How do they disseminate eWOM? Through interviewed three online cosmetic stores in Taiwan and applied secondary data analysis, the preliminary research findings include: 1. The motivations to manage eWOM for online cosmetic stores are collecting market information and building brand trust. 2. Online cosmetic stores take advantage of cosmetic community sites and official websites to monitor eWOM, identify the importance of eWOM by the detail descriptions. 3. Online cosmetic stores will optionally respond to negative eWOM to pacify and show the sense of responsibility. 4. Online cosmetic stores apply customer referral program, beauty knowledge conveying and promotion activities to increase the positive eWOM. 5. The respond mechanisms in online cosmetic websites also contribute to monitor and dissemination of eWOM. The study also contributed to the eWOM management theory by: 1. Supplement to the lack of eWOM respond and dissemination mechanisms. 2. Provide new references for eWOM management model revising. 3. Found the new relationship between eWOM and traditional marketing communication tools.
Hung, Chien Yu, and 洪建宇. "A study of store images for Electronic Stores." Thesis, 2004. http://ndltd.ncl.edu.tw/handle/61270477601774154145.
Full text輔仁大學
管理學研究所
92
With increasing of popularity and growing of Broadband Network rapidly in Taiwan, the acceptance degree of consumers to Electronic Store is rising. According to the forecast of Institute for Information Industry, E-commerce market will grow and reach 50,100 million NT dollars by a wide margin in 2005. Because the appearing of business opportunity of the market, enterprises carried on E-Marketplace one after another. They believed that E-Marketplace will attract more people to participate in the operation of the Electronic Stores with the reducing of the technological threshold of information. Electronic Stores itself has looks relatively unique characteristic to the traditional stores, and the technology of information will not be a barrier to operate Electronic Stores. Why don’t people run Electronic Stores very successful? From the viewpoints of consumers, this study wants to find out what store images of Electronic Stores could catch consumers’ eyes. Furthermore, this study regarded FCB Grid as a classified basis of goods to find out what difference between store images of Electronic stores to consumers when they deal with different kinds of goods? The purposes of this study are below: 1. What store images of Electronic Stores do customers place importance on? 2. What difference between store images of Electronic stores to customers when they deal with different kinds of goods? With convenience sampling, this study collected the data by network questionnaire and face-to-face interview with people who had consumption experience in the Electronic Stores. The effective samples add up to 458. The result of study includes: 1. The top six components of store images which consumers place importance on Electronic stores are security, service quality, after-sale service, information, products quality and operation convenience. 2. It is failed to find the significant proof to prove that consumers will place different importance level on store images when they consume different kind of goods.
顧宜錚. "A study on the diffusion of electronic stores." Thesis, 1999. http://ndltd.ncl.edu.tw/handle/37112458257187156406.
Full textAfonso, Maria Betânia Benita. "An Ethereum-based point of sale system for retail stores." Master's thesis, 2021. https://hdl.handle.net/10216/135600.
Full textThe use of cryptocurrencies and their use on retail has evolved a lot throughout these last few years. Thus, the tendency for a progressive increase in the demand for methods of using these currencies is to be expected and is predicted to be the future. Thus, the main objective of this dissertation is to study and implement a strategy capable of making payments in Point of Sale (POS) systems using ethereum in order to keep up with the demand of the public.
Afonso, Maria Betânia Benita. "An Ethereum-based point of sale system for retail stores." Dissertação, 2021. https://hdl.handle.net/10216/135600.
Full textThe use of cryptocurrencies and their use on retail has evolved a lot throughout these last few years. Thus, the tendency for a progressive increase in the demand for methods of using these currencies is to be expected and is predicted to be the future. Thus, the main objective of this dissertation is to study and implement a strategy capable of making payments in Point of Sale (POS) systems using ethereum in order to keep up with the demand of the public.
Bicho, Edgar Alberto da Rocha Pinto. "Gestão integrada de stocks na indústria da cortiça." Master's thesis, 2016. https://repositorio-aberto.up.pt/handle/10216/85454.
Full textBicho, Edgar Alberto da Rocha Pinto. "Gestão integrada de stocks na indústria da cortiça." Dissertação, 2016. https://repositorio-aberto.up.pt/handle/10216/85454.
Full textShu, Lai Wen, and 賴文樹. "A Study of the Decision Factors in Implementation of Electronic Stores." Thesis, 1998. http://ndltd.ncl.edu.tw/handle/46252535254230623355.
Full text大葉大學
資訊管理研究所
86
With the rapid adoption of the Internet by businesses, this global networkhas become a major focus in the international arena. In recent years issues related to conducting businesses over the Internet have widely received enthusiastic attention from both business and academic circles. Companies in avarity of industries are looking to electronic commerce as a new marketing channel that may bring strategic benefits. In the midst of this new transnational wave of technological phenomenon, businesses in the Taiwan area are joinging this trend and activly looking for opportunities of benefiting from the cyberspace commerce. The purpose of this study is to identify the factors associated with the installation of electronic stores, benefits resulting from and the difficulties experienced in the their adoption. Accroding to this study, the first three driving factors for electronic stores adoption are 1) Cost required to install, manage, and maintain the web site, 2) Support and involvement of top management, and 3) Awareness of top management regarding the benefits of electronic stores. The first three benefits resulting from electronic stores are 1) Improvement of company image of pubicity, 2) Development of new marketing channel and expansion of marketing territory, and 3) Twenty-four-hour marketing operations. The first three major difficulties experiences by the companies are 1) Customers'''' consuming behaviors remaining unchanged, 2) Lack of and arbitrage institution for conflict resolution, and 3) Certification and the related legal regulationsystems far from being mature enough. Several suggestions derived from this study are presented for businesses considering set up electronic stores as well as vendors providing Internet services and governmnet.
Aguiar, Duarte Marques. "Sistema de Localização de Objetos para Gestão de Stocks." Master's thesis, 2021. https://hdl.handle.net/10216/135558.
Full textIn a retail store, when stocks of a product run out on a shelf for long periods of time, potential losses of profit can occur. In this way, the developed system aims to alert store repositors of these stock outages in order to prevent them. In addition, the system developed provides the retailer with information on: the quantity of products removed from the shelves; the movement of products to other shelves other than those designated; and possible theft of products. The developed system uses two load cells for each shelf in order to detect movements that occur and determine the weight and relative position associated with each one. Since each shelf may contain more than one type of product, it is necessary to infer the quantity and type of products involved in a given movement. For this, information about the disposition of products on the shelf, called planograms, is used.
Aguiar, Duarte Marques. "Sistema de Localização de Objetos para Gestão de Stocks." Dissertação, 2021. https://hdl.handle.net/10216/135558.
Full textIn a retail store, when stocks of a product run out on a shelf for long periods of time, potential losses of profit can occur. In this way, the developed system aims to alert store repositors of these stock outages in order to prevent them. In addition, the system developed provides the retailer with information on: the quantity of products removed from the shelves; the movement of products to other shelves other than those designated; and possible theft of products. The developed system uses two load cells for each shelf in order to detect movements that occur and determine the weight and relative position associated with each one. Since each shelf may contain more than one type of product, it is necessary to infer the quantity and type of products involved in a given movement. For this, information about the disposition of products on the shelf, called planograms, is used.
Juang, Miaw-Hwa, and 莊妙華. "Effect of e-clerks on the Intention of Purchase in Electronic Stores." Thesis, 2001. http://ndltd.ncl.edu.tw/handle/79513660824563137168.
Full textYu-Bin, Chiu, and 邱裕賓. "A Study on the Implementation of Electronic Stores from the Marketing Perspective." Thesis, 1998. http://ndltd.ncl.edu.tw/handle/52487499022240173056.
Full text國立雲林科技大學
資訊管理研究所
86
The rapid development of Internet and information technology has made electronic commerce flourishing, which brings great impact and changes to traditional stores and marketing environment. This trend makes business have to seriously reconsider not only the influence of established electronic stores, but also the overall marketing strategies. This study focuses on the implementation of electronic stores from the marketing perspective. The sample is obtained from a population of one thousand industrial, five hundred service, and one hundred financial companies listed in a business magazine. The purpose of this study can be listed as follows:(1).To suggest an appropriate approach for planning of an electronic store, (2).To survey current situation for the implementation of electronic stores, (3).To explore the impediments of an electronic store implementation, (4).To explore the expected benefits of an electronic store implementation, and (5).To survey the differences of the marketing mix, the impediments, and the expect benefits among the different business corporation.The research results can be described as below:(1).Most surveyed companies are at the stage 2 of a six stage adoption theory, (2)."The image and advertisement of business" is perceived as the most important function of electronic stores, (3).This study suggests a process for planning an electronic store effectively: "Define the goal of electronic store", "Define the marketing mix of electronic store", "Define the support and detail functions of electronic store", and "Define the system infrastructure of electronic store," (4).We identified five elements of electronic store''s marketing mix: "Promotion", "Product", "Price", "Transaction information", and "People and physical evidence," (5).The important impediments are:"Network infrastructure", "Risk and laws", "Property of product", "Intra-environment", "Extra-environment," and(6)The important expected benefits are:"Creation and convenience", "Environment and management", "Enhance advantage", "Productivity and control", "Security and standard", and "Cost saving."
SHIH, SHING-HYANG, and 施星光. "Why Do Consumers Continually to Patronize Traditional Electric Appliance Stores? A Perspective from Push-Pull-Mooring Theory." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/6pd85g.
Full text國立高雄應用科技大學
企業管理系碩士在職專班
104
After over seventy-five years of development, the home appliance industry in Taiwan is a mature market. However, sales channels are still evolving and include traditional community appliance stores chained appliance stores, hyper wholesale shops and web shops for on-line ordering. The competition of the sales channels is fierce among all kinds of selling approach. The study is based on “Push-Pull-Moor” (PPM) theory to develop a research model to investigate the factors keeping consumers continually patronize traditional community appliance stores. The findings showed that the traditional appliance stores are still preferred by locals due to its strongest mooring effect of switching costs, even under the pushing force effect of poor store image and strong competitors' attraction pulling force effect. This study concluded three recommendations for the operational reference of traditional appliance stores.
Kuo, Che-Chun, and 郭芝君. "The study of momentum strategy of Taiwan electronic stocks." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/80631702033556683235.
Full text國立中興大學
財務金融學系
93
Jegadeesh and Titman (1993) document the momentum strategy. Investors tend to underreact to new information, so that the stock price has the phenomenon of momentum. With buying the prior winners and selling the prior losers, the momentum strategy has obtained abnormal return over 3–12 months. This study forms the portfolios with1, 3, 6, 9, 12 months formation and holding periods to investigate whether abnormal positive returns in Taiwan stock market in 1991-2005 can be obtained by some investment strategies. We also examine the returns of momentum strategy in business cycle and stock market cycle. Moreover, we use economic indicators and technical analysis diagrams to form the investment portfolios and then to discuss whether these indicators provide useful information on forming strategies. Our empirical results show that the average return of momentum strategy is not significant positive in Taiwan stock market during 1991-2005. However, momentum strategy with information of business cycle and stock market cycle obtain positive profit. The winner portfolio is better than momentum portfolio in the expansion of business cycle and bull market. On the other hand, The loser portfolio perform better than momentum portfolio in the recession of business cycle and bear market. The period of momentum phenomenon in stock market cycle lasts longer than that in business cycle. The momentum portfolio in stock market cycle performs better than that in business cycle. In addition, leading indicator and the technical analysis of Moving Average(MA) provide useful information to investors.
Lu, Pei-Chiang, and 呂倍強. "Overreaction Hypothesis and size effect in Taiwan Electronic Stocks." Thesis, 2000. http://ndltd.ncl.edu.tw/handle/20211527548572317657.
Full text淡江大學
管理科學學系
88
We use the weekly return data from the first week in 1995 to the 8th in 1999 to discuss if the behavior of electronic stocks is according to the overreaction hypothesis. We use the weekly data instead of daily data as former review, because the variance of daily data is larger and there are some limits in Taiwan’s stock market; therefore, the weekly data can really react the short-run trend. Besides, we classify the electronic stocks according to the size, there are large, median, and small, to test if the stock behavior is according to the overreaction hypothesis. Here, we mainly discuss the strategies, the first one is to buy the loser and sell the winner at the same time (contrary strategy), which is the two-way strategy, and the other one is buy the winner or sell the loser at this time, which is a one-way strategy. We now discuss separately these two strategies if there is abnormal return in the situation. Without considering size effect, the results show that the first strategy (contrary strategy) will get the negative excess return; the second one shows it is obvious the excess return from sell the loser is more than that from buy the winner. This indicates that Taiwan’s electronic stocks get “the winner is keeping on upping and the loser is on downing.” Moreover, when considering size effect, the first strategy still gets the negative excess return but in small size, the effect is not as obvious as what is in large or median size. On the other hand, to buy the winner portfolio shows it will produce positive abnormal return when buying the small or median ones; however, it is not significant in large ones. To sell the loser, it will get the excess return whatever size it is, especially when selling the large-size loser. There is a big finding in size effect, the evidence shows Taiwan’s electronic stocks get “the winner is keeping on upping and the loser is on downing.” In result, the invest strategies are that it will get profits in whatever size it is while using the first strategy; when only buying winner portfolio, it is more possible to get profits in small and median size; when only selling the loser portfolio, it is more profitable in large size. 第一章 緒論 1 1.1 研究背景 1 1.2 研究動機與目的 2 1.3 研究流程與架構 4 第二章 文獻探討 6 2.1 理論依據 6 2.2 國外相關實證文獻 9 2.3 國內相關實證文獻 15 第三章 研究方法 24 3.1 研究期間與選樣標準 24 3.2 研究模式的選取 27 3.3 研究設計 30 3.4 研究假設與統計檢定 37 3.5 研究限制 43 第四章 實證結果與分析 44 4.1 市場模式之建立 44 4.2 未控制公司規模前的實證結果 48 4.3 控制公司規模後的實證結果 52 第五章 結論與建議 66 5.1 結論 66 5.2 建議 67 參考文獻 69
Mei-Chun, Lai, and 賴美君. "The efficiency of portfolio insurance:The use of electronic stocks portfolio." Thesis, 1998. http://ndltd.ncl.edu.tw/handle/65157898057466658068.
Full text