Relevant bibliographies by topics / Electric power systems – Protection

Academic literature on the topic 'Electric power systems – Protection'

Author: Grafiati
Published: 4 June 2021
Last updated: 28 January 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Electric power systems – Protection.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Electric power systems – Protection"

1

Pana, L. "Simulation of protection functions in LV shipboard electrical power systems." Scientific Bulletin of Naval Academy XXV, no. 1 (August 15, 2022): 8–15. http://dx.doi.org/10.21279/1454-864x-22-i1-001.

Full text
Abstract:
The basic function of a shipboard electric power systems is to supply all consumers, both essential and non-essential, with electrical energy, as economically as possible and with an acceptable degree of quality. A shipboard electrical power system comprises three principal subsystems: generation (naval power plant-island mode plant), distribution and protection and automation. During operation all these subsystems may be affected by faults. In this aim all electrical installations on shipboards are to be protected against over-currents due to short- circuits or accidental overloads. The new ABB air circuit-breakers Emax 2 and Tmax T series can be used both as main circuit-breaker in low voltage generation and distribution systems. In addition to protection, the new air ABB circuit-breakers offer possibility of communication which are particularly suitable for automation, control, measurements, grid analysis, and energy savings. ABB Relays are high-performance electronic units for these circuit breakers. Their basic function is to monitor and protect the electric systems against fault current. The units also includes: measuring, data storage, communication, self-test, load control and zone selectivity functions for these circuit-breakers. This paper presents the analysis of protections and simulates how to trigger protections within shipboard power systems.
APA, Harvard, Vancouver, ISO, and other styles
2

Goh, Hui Hwang, Sy yi Sim, Dahir Khere Diblawe, Mortar Mohamed Ali, Chin Wan Ling, Qing Shi Chua, and Kai Chen Goh. "Energy Power Plant in Electric Power Distribution Systems Equipping With Distance Protection." Indonesian Journal of Electrical Engineering and Computer Science 8, no. 1 (October 1, 2017): 192. http://dx.doi.org/10.11591/ijeecs.v8.i1.pp192-198.

Full text
Abstract:
<p>This paper suggests the theory of distance protection criteria in power distribution systems for power plant generation. Multi-developed countries have energy power plants that placed in remote areas which are far from the grid line. Hence, they should be coupled to the low power transportation systems necessarily. While higher-rating relays are adopted to preserve feeders at power substations, fuses are merely obtainable outside on feeder channel. The safe system process, space protection is dispatched to save feeders. In this review, feeders with distance relays are equipped, together with over-current protection relays and fuses. Energy power plant having distance protection system is designed the implemented system was a 6-MW unit of compressed power energy reproduction. The sample feeder was shortened to be equal four-bus experiment feeder for transmitting resolution. The fault currents have chances adopted to form protecting regions of distance relays. Protection of the power line through the designed power plants for distance relaying can decrease problem in relay location because of the impedance-based location of the distance relay. </p>
APA, Harvard, Vancouver, ISO, and other styles
3

Panteleev, V. I., I. S. Kuzmin, A. A. Zavalov, A. V. Tikhonov, and E. V. Umetskaia. "Power quality in power supply systems of mining and processing enterprises in Russia." Proceedings of Irkutsk State Technical University 25, no. 3 (July 6, 2021): 356–68. http://dx.doi.org/10.21285/1814-3520-2021-3-356-368.

Full text
Abstract:
This paper investigates the effect of the load factor of frequency converters and thyristor converters on electrical power quality. Recommendations for reducing the influence of higher harmonics and switching overvoltages on the characteristics of electrical power are provided. Higher harmonics were measured by a PKK57 complex device for controlling electrical parameters and a digital oscilloscope of the Tektronix TDS 2024V type. Impulse switching overvoltages were recorded by an active resistance divider of the DNEK-10 type and the above-mentioned oscilloscope. The obtained data were processed by the Loginom 6.4 software and the methods of mathematical statistics. The lower threshold level of the load factor of frequency converters and thyristor converters was set equal to 0.8, at which the sinusoidal distortion of voltage curves correspond to the RF standard of electrical power quality. The suppression degree of higher harmonics from the 5th to 17th frequency by power transformers with a capacity of 250–6,300 kV. A ranged from 95 to 45%. The use of the ‘transformer–converter–electric receiver’ system as applied to the power supply systems of mining and processing enterprises was substantiated. It was shown that electric motors with a capacity of up to 2,500 kW inclusively require protection against switching overvoltages. Conventional RC-absorbers based on RC-circuits connected to the terminals of electric motors are shown to be highly efficient for protecting electric motors against switching overvoltages. Thus, the quality of electrical power in power supply systems of mining and processing enterprises in Russia can be ensured by frequency converters and thyristor converters with a load factor of 0.8 or greater. Provided that the transformer capacity does not exceed 1,000 kV. A, a more efficient and less expensive ‘transformer–converter–electrical receiver’ system is recommended. Effective protection of electric motors of up to 2,500 kW inclusive can be provided using the proposed conventional RC absorber, which maintains the overvoltage rate at a level not exceeding 1.7.
APA, Harvard, Vancouver, ISO, and other styles
4

Shirokov, Nikolaj V. "PREVENTIVE PROTECTION OF AUTONOMOUS ELECTRIC POWER SYSTEMS FROM GENERATORS REVERSE POWER." Vestnik Gosudarstvennogo universiteta morskogo i rechnogo flota imeni admirala S. O. Makarova 12, no. 4 (August 28, 2020): 789–800. http://dx.doi.org/10.21821/2309-5180-2020-12-4-789-800.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Wang, Lin Yuan. "The Application Research of Current Protection Device in Low-Voltage Rural Grid." Applied Mechanics and Materials 644-650 (September 2014): 3675–77. http://dx.doi.org/10.4028/www.scientific.net/amm.644-650.3675.

Full text
Abstract:
Current protective device against direct and indirect electric shock as well as effective protection against electrical fires has been widely used in the rural power grid, but there is also a more prominent issue. Residual current protection device in use often appearing malfunction, tripping phenomenon has seriously affected the security and stability and reliability of power supply and low voltage distribution systems. In this paper, it should be from a low-voltage distribution systems and wiring protection devices, power grid maintenance operation, standardized management products, technical training and promotion of social workers and other aspects of a comprehensive solution to this problem; and presented on the remaining current protection device applications, some of the views.
APA, Harvard, Vancouver, ISO, and other styles
6

Rolim, Felipe B. B., Fernanda C. L. Trindade, and Marcos J. Rider. "Adaptive Protection Methodology for Modern Electric Power Distribution Systems." Journal of Control, Automation and Electrical Systems 32, no. 5 (August 3, 2021): 1377–88. http://dx.doi.org/10.1007/s40313-021-00774-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Koniukhov, A. M., A. V. Khlebnov, and V. A. Timanov. "A method of testing relay protection and automation involving exposure to cascading effects for improved power supply reliability and electric power system stability." Dependability 21, no. 4 (December 28, 2021): 47–52. http://dx.doi.org/10.21683/1729-2646-2021-21-4-47-52.

Full text
Abstract:
The Aim of the paper is to show that improved power supply reliability and electric power system stability are achieved by applying new methods of testing relay protection and automation (RPaA). Major cascading failures in electric power systems are caused by cascading effects, i.e., effects involving several successive effects of various nature. Cascading effects allow extending the functionality while testing RP&A and taking into account the time factor in the context of effects of various nature. Method. A method is proposed for testing relay protection and automation taking into account the cascading effect that is used in the process of development, calibration and installation of protection devices for operation in predefined modes for the purpose of improved power supply reliability and unfailing stability of electric power systems. Result. Intermittent cascading effects do not allow the relay protection and automation recover the electric power system from the post-emergency mode, thus reducing the dynamic stability to the critical level. The diagram of relay protection and automation exposure allows taking into consideration the environmental effects in the process of testing the relay protection and automation. Conclusion. The proposed method of cascading exposure as part of testing relay protection and automation can be used in the process of development, calibration and installation of electric power systems protection and will enable improved stability of electric power systems and reliability of power supply.
APA, Harvard, Vancouver, ISO, and other styles
8

Gębura, Andrzej, and Tomasz Tokarski. "Selected Problems In Controlling On-Board Direct And Alternating Current Systems." Research Works of Air Force Institute of Technology 36, no. 1 (August 1, 2015): 109–30. http://dx.doi.org/10.1515/afit-2015-0018.

Full text
Abstract:
AbstractThe article addresses in a complex way the problem of cooperation between the on-board electric power sources of an aircraft with its on-board electric network. The authors paid special attention to conditions related to correct switching of the on-board electric power sources. Structural protection of the electric power sources against harmful impact of loads, and of the loads against incorrectly operating sources, as well as certain methods to counteract such phenomena, are discussed. Exploring these relations will enable the user to undertake actions which can reduce the failure rate of the on-board electrical power network, and ensure power supply to the electrical loads under all flight conditions. Their correct operation determines correct operation of the on-board electrical power network. The authors tried to discuss all the problems in the most universal way possible, so the deliberations presented here could be helpful in analyzing defects in various aircrafts.
APA, Harvard, Vancouver, ISO, and other styles
9

Moustafa, Moustafa Abdelrahman Mohamed Mohamed, and Choong-koo Chang. "Preventing cascading failure of electric power protection systems in nuclear power plant." Nuclear Engineering and Technology 53, no. 1 (January 2021): 121–30. http://dx.doi.org/10.1016/j.net.2020.06.010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bordyug, Alexander Sergeevich. "Application of distributed optical control technology in ship power systems." Vestnik of Astrakhan State Technical University. Series: Marine engineering and technologies 2021, no. 2 (May 31, 2021): 75–81. http://dx.doi.org/10.24143/2073-1574-2021-2-75-81.

Full text
Abstract:
The article considers the point sensor technology for onshore power systems, which has a significant potential in providing new and effective solutions for monitoring and protecting marine electrical systems. These technologies can reduce the risk levels associated with marine electrical systems by providing comprehensive monitoring and protection functions that benefit from the distributed nature of the metering system. There has been described a system that consists of a data collecting device with optical fiber to collect multiple readings from a distributed passive array of sensors connected along a fiber length up to 100 km (applicable for any marine systems). There have been illustrated the variants of distributed monitoring and protection system in marine electrical systems. It has been stated that in the advanced marine systems there are used all-electric propulsion systems that distribute electricity between the ship's propulsion plants and other consumers. The power distribution has been proved necessary to rise efficiency, controllability, flexibility and cost of the system. Application of the new DC systems with zoned architecture, the emergence of batteries and other forms of power storage, and studying the superconducting cables and machines add to the importance of having knowledge of system operability and timely and safe response to failures and damages of the system.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Electric power systems – Protection"

1

Mguzulwa, Ncedo Richard. "Investigation of interoperability of IEC 61850 protection functions." Thesis, Cape Peninsula University of Technology, 2018. http://hdl.handle.net/20.500.11838/2704.

Full text
Abstract:
Thesis (Master of Engineering in Electrical Engineering)--Cape Peninsula University of Technology, [2018].
Introduction of IEC 61850 standard defined substation automation system communication. The need of interoperability among the relevant devices coming from different vendors is a necessity to ensure utilities/municipalities obtain value for money. Vendors used their own proprietary tools to achieve communication in a substation. This caused an Intelligent Electronic Device (IED) from vendor A could not communicate with an IED from vendor B. Utilities/municipalities are forced to depend on single vendor solutions in a substation automation system. IEC 61850 systems tout Interoperability as a major gain in the Substation Automation System (SAS) environment. The implementation of interoperable systems in SAS environment requires extensive testing and careful selection of vendors. This involves extensive testing to meet the required requirements of a certain SAS. Interoperability implementation and testing methods need to be formulated and tested rigorously with various scenarios of interoperability in an SAS. GOOSE messages form the foundation of IEC 61850 standard as they are responsible for the copper-less connections for peer to peer communications. GOOSE messages are based on peer to peer communications to enable interoperability at the bay level which is called horizontal communication. IEDs need to be carefully selected to ensure GOOSE messaging interoperability is achieved. Test methods are equally important as methodology to achieve interoperability. The purpose of this research is to perform an investigation on interoperability of IEC 61850 conformant IEDs based on evaluation of their protection functions. The research looks at various vendors on how each has interpreted the IEC 61850 standard. Also an analysis on requirements to achieve interoperability is conducted. Investigation on various vendor independent system configuration tools to ease the implementation burden of a multivendor application is done. Evaluation into flexible object modelling and naming conventions in order to achieve interoperability is performed. Various tests using different tools to assess the integrity of interoperability are completed. The research delivers a methodology to evaluate and implement GOOSE message interoperability. The interoperability methodology can be used for improvement of interoperability applications. The methodology can also be implemented as procurement requirement to ensure interoperability. The evaluation/implementation of interoperability can be included in Factory Acceptance Test (FAT). The methodology to achieve interoperability is only usefully when requirements are clear with regard to what needs to achieved by SAS.
APA, Harvard, Vancouver, ISO, and other styles
2

Qadri, Syed Saadat. "A systematic approach to setting underfrequency relays in electric power systems /." Thesis, McGill University, 2008. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=116022.

Full text
Abstract:
Generation loss contingencies in electric power systems result in a deviation of system frequency from nominal, a condition which must be corrected promptly in order to prevent further degradation of the power system. Automatic load-shedding using underfrequency relays is one of the techniques used to correct abnormal frequency deviations and prevent the risk of uncontrolled outages. If sufficient load is shed following a contingency to preserve interconnections and keep generators on-line, the system can be restored with relative speed and ease. On the other hand, if a declining frequency condition is not dealt with adequately, a cascading disconnection of generating units may develop, leading to a possible total system blackout.
This thesis develops and tests a new systematic method for setting underfrequency relays offering a number of advantages over conventional methods. A discretized swing equation model is used to evaluate the system frequency following a contingency, and the operational logic of an underfrequency relay is modeled using mixed integer linear programming (MILP) techniques. The proposed approach computes relay settings with respect to a subset of all plausible contingencies for a given system. A method for selecting the subset of contingencies for inclusion in the MILP is presented. The goal of this thesis is to demonstrate that given certain types of degrees of freedom in the relay setting problem, it is possible to obtain a set of relay settings that limits damage or disconnection of generating units for each and every possible generation loss outage in a given system, while attempting to shed the least amount of load for each contingency.
APA, Harvard, Vancouver, ISO, and other styles
3

Mthunzi, Everett Mondliwethu. "Performance analysis of a protection scheme based on P-class synchrophasor measurements." Thesis, Cape Peninsula University of Technology, 2016. http://hdl.handle.net/20.500.11838/2378.

Full text
Abstract:
Thesis (MTech (Electrical Engineering))--Cape Peninsula University of Technology, 2016.
Power grid and system protection advancement greatly depend on technological advances. Advent technologies like digital microprocessor type protective relays facilitate paradigm shifts, providing inimitable beneficial engineering adaptations. Phasor measuring technology provides one such technological advance. The onset and rapid development of the Phasor Measuring Unit (PMU) provides an excellent platform for phasor-based, power system engineering. Power transmission constitutes a critical section in the electric power system. The power system transmission lines are susceptible to faults which require instant isolation to establish and maintain consistent system stability. This research focuses on the study of transmission line protection based on P-Class synchrophasor measurements. The IEEE C37.238-2011 Precision Time Protocol (PTP) paradigm shift facilitates practical application of synchrophasors in protection schemes. Synchrophasor procession and accurate data alignment over wide areas support the hypothesis of a phasor-based transmission line differential protection. This research aims to directly implement P-Class synchrophasors in transmission line differential protection, employing synchrophasors to determine fault conditions and administer corresponding protective actions in wide area transmission lines. The research also aims to evaluate the operational characteristics of the synchrophasor-based transmission line differential protection scheme. The research deliverables include a laboratory scale Test-bench that implements the PMU-based transmission line differential protection scheme, and a differential protection utility software solution that follows guidelines specified by the C37.118-2011 standard for synchrophasors. The findings stand to evaluate performance of the PMU-based line differential protection scheme, verifying the protection model as an alternate, practical and feasible backup protection solution. The research deliverables include a synchrophasor-based current differential algorithm, software utility for implementing the PMU-based protection scheme and a Test-bench for concept and feasibility validation.
APA, Harvard, Vancouver, ISO, and other styles
4

Alvarez, Rogelio E. "Interdicting electrical power grids." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2004. http://library.nps.navy.mil/uhtbin/hyperion/04Mar%5FAlvarez.pdf.

Full text
Abstract:
Thesis (M.S. in Operations Research)--Naval Postgraduate School, March 2004.
Thesis advisor(s): Javier Salmeron, R. Kevin Wood. Includes bibliographical references (p. 69-70). Also available online.
APA, Harvard, Vancouver, ISO, and other styles
5

Mao, Yiming Mui Karen. "Protection system design for power distribution systems in the presence of distributed generation /." Philadelphia, Pa. : Drexel University, 2005. http://dspace.library.drexel.edu/handle/1860/501.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Amann, Nicholas Paul. "Adaptive overcurrent protection scheme for shipboard power systems." Master's thesis, Mississippi State : Mississippi State University, 2004. http://library.msstate.edu/etd/show.asp?etd=etd-06282004-140248.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Sarawgi, Sanjoy Kumar. "A simulation tool for studying the effects of special protection systems and communications on power system stability." Online access for everyone, 2004. http://www.dissertations.wsu.edu/Thesis/Summer2004/s%5Fsarawgi%5F072604.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Liu, Bohan. "Advanced ROCOF protection of distribution systems." Thesis, University of Nottingham, 2012. http://eprints.nottingham.ac.uk/14344/.

Full text
Abstract:
When islanding occurs, power supply from the main grid is interrupted which causes a problem when distributed generators continue to provide power into distributed networks. An islanding situation should be detected accurately soon after the island is formed. Because failure to trip the islanded distributed resource can lead to a number of problems for the resource and the connected load. Although ROCOF islanding detection method is the most commonly employed anti-islanding protection technique, it provides fast detection and easily implementation. It is sensitive to the system disturbance. Therefore, the application of the ROCOF relay to detect system islanding has been limited. This thesis proposes a solution to enhance the performance of the ROCOF relay by cooperation with rate of change of power or v2/p interlock function. During system load variation, the false operation of ROCOF relay can be blocked effectively. It is validated by applied in grid-connected synchronous generator, Doubly-fed Induction generator (both simulation and experiment) and microgrid. The principle of rate of change of power or v2/p interlock function are presented in this thesis. The new interlock function v2/p with ROCOF relays works well for different types of DGs within a short detection time without introducing perturbation into the system, which are the advantages over other active and hybrid islanding detection methods. The performances characteristics of ROCOF relays for DGs islanding detection (i.e. frequency measuring methods, measuring windows, generator inertia constant, relay settings and load power factor) are investigated. In addition, two other islanding detection methods (impedance measurement (active method) and the Total Harmonic Method) are applied to the grid-connected DFIG distributed system, the comparison and effectiveness of these two methods utilized in islanding and load changing conditions are also discussed.
APA, Harvard, Vancouver, ISO, and other styles
9

Harris, Raymond Trevor. "Replacement of seven 132/66 kv distance protection schemes by means of a generic relay implemented as a strategic spare." Thesis, Port Elizabeth Technikon, 2000. http://hdl.handle.net/10948/34.

Full text
Abstract:
Eskom is experiencing problems in the field of protection maintenance and in-service breakdowns which negatively influence the quality of electrical supply to the consumer, an integral component of the utility business. These facts initiated the research into the further development of a generic relay to be implemented as a strategic spare for the replacement of several schemes operating within Eskom’s southern region. These include the electromechanical, solid state and numerical distance protection relay and scheme failures on the 132 / 66 kV feeder network. Hence, the primary objective of the research is to develop, test and configure the strategic spare in terms of software and peripheral hardware for the input and output terminal connections, generic equations and settings for the purpose of the scheme replacements. The various schemes are assessed for stepped distance and permissive intertripping for three or single pole operation. This is done in conjunction with the internal and external circuit diagrams in order to understand the detailed operation of the scheme and to ensure the effective implementation of the strategic spare. The generic relay is configured for the emergency replacement of the various schemes during in-service breakdowns. This constitutes a temporary installation and therefore the downtime in essence, of all the distance protection schemes that require replacement, is limited to a minimum. This dissertation therefore explores the implementation of the strategic spare.
APA, Harvard, Vancouver, ISO, and other styles
10

Kumbale, Murali. "Bulk transmission system reliability analysis of protection and control groups." Thesis, Georgia Institute of Technology, 1996. http://hdl.handle.net/1853/13840.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Electric power systems – Protection"

1

G, Phadke Arun, ed. Power systems relaying. 3rd ed. Chichester, West Sussex, England: Wiley, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Goremykin, Sergey. Relay protection and automation of electric power systems. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1048841.

Full text
Abstract:
The textbook describes the main issues of the theory of relay protection and automation of electric power systems. The structure and functional purpose of protection devices and automation of power transmission lines of various configurations, synchronous generators, power transformers, electric motors and individual electrical installations are considered. For each of the types of protection of the above objects, the structure, the principle of operation, the order of selection of settings are given, the advantages and disadvantages are evaluated, indicating the scope of application. The manual includes material on complete devices based on semiconductor and microprocessor element bases. The progressive use of such devices (protection of the third and fourth generations) is appropriate and effective due to their significant advantages. Meets the requirements of the federal state educational standards of higher education of the latest generation. It is intended for students in the areas of training 13.03.02 "Electric power and electrical engineering" (profile "Power supply", discipline "Relay protection and automation of electric power systems") and 35.03.06 "Agroengineering" (profile "Power supply and electrical equipment of agricultural enterprises", discipline "Relay protection of electrical equipment of agricultural objects"), as well as for graduate students and specialists engaged in the field of electrification and automation of industrial and agrotechnical objects.
APA, Harvard, Vancouver, ISO, and other styles
3

Power system protection. New York: McGraw-Hill, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Eng, Brown Mark Pr, Balakrishnan Ramesh, and Knovel (Firm), eds. Practical power systems protection. Oxford: Newnes, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Christopoulos, C. Electrical Power System Protection. 2nd ed. Boston, MA: Springer US, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

A, Wright, and Wright A, eds. Electrical power system protection. 2nd ed. Dordrecht, Netherlands: Kluwer Academic, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wright, A. Electrical power system protection. London: Chapman & Hall, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hester, Edward, Diana E. Kole, and Dawn J. Trebec. Uninterruptible power supplies (UPS) & other power protection systems. Cleveland: Freedonia Group, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Davies, T. Protection of industrial power systems. 2nd ed. Oxford: Butterworth Heinemann, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ungrad, H. Protection techniques in electrical energy systems. New York: M. Dekker, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Electric power systems – Protection"

1

Patel, Mukund R. "System Protection." In Shipboard Electrical Power Systems, 239–71. 2nd ed. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9781003191513-10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Rezinkina, Marina, Vitalii Babak, Oleg Gryb, Artur Zaporozhets, and Oleg Rezinkin. "Increasing the Reliability of Lightning Protection of Electric Power Facilities." In Power Systems Research and Operation, 281–317. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-17554-1_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Vittal, Vijay. "Emergency Control and Special Protection Systems InLarge Electric Power Systems." In Stability and Control of Dynamical Systems with Applications, 293–314. Boston, MA: Birkhäuser Boston, 2003. http://dx.doi.org/10.1007/978-1-4612-0037-6_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Fisher, Joseph, Paul R. P. Hoole, Kandasamy Pirapaharan, and Samuel R. H. Hoole. "Lightning Electrodynamics: Electric Power Systems and Aircraft." In Lightning Engineering: Physics, Computer-based Test-bed, Protection of Ground and Airborne Systems, 233–88. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-94728-6_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Saushev, Alecsandr, Nikolai Shirokov, and Sergey Kuznetsov. "Preventive Protection of Ship’s Electric Power System from Reverse Power." In International Scientific Conference Energy Management of Municipal Facilities and Sustainable Energy Technologies EMMFT 2019, 388–98. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-57450-5_33.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hari Gupta, Om, Manoj Tripathy, and Vijay K. Sood. "Modifications Required in Power System to Meet Increasing Power Demand." In Protection Challenges in Meeting Increasing Electric Power Demand, 19–32. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-60500-1_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Corsi, Sandro. "Wide Area Voltage Protection." In Voltage Control and Protection in Electrical Power Systems, 497–542. London: Springer London, 2015. http://dx.doi.org/10.1007/978-1-4471-6636-8_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Milis, George M., Elias Kyriakides, and Antonis M. Hadjiantonis. "Electrical Power Systems Protection and Interdependencies with ICT." In Lecture Notes in Computer Science, 216–28. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-30382-1_27.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Mbunwe, Muncho Josephine, Boniface Onyemaechi Anyaka, and Uche Chinweoke Ogbuefi. "Solid-State Protection of a Perturbed Electric Power System Network." In Transactions on Engineering Technologies, 124–38. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-6848-0_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Corsi, Sandro. "Grid Voltage and Reactive Power Control." In Voltage Control and Protection in Electrical Power Systems, 81–158. London: Springer London, 2015. http://dx.doi.org/10.1007/978-1-4471-6636-8_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Electric power systems – Protection"

1

Booth, C. D., I. Elders, A. Mackay, J. D. Schuddebeurs, and J. R. McDonald. "Power system protection of all electric marine systems." In IET 9th International Conference on Developments in Power Systems Protection (DPSP 2008). IEE, 2008. http://dx.doi.org/10.1049/cp:20080125.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Shurygin, Yuri. "Intelligent Relay Protection of Electric Power Systems." In 2019 1st International Conference on Control Systems, Mathematical Modelling, Automation and Energy Efficiency (SUMMA). IEEE, 2019. http://dx.doi.org/10.1109/summa48161.2019.8947568.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Saad, Saad M., Abdelsalam Elhaffar, and Khalil El-Arroudi. "Optimizing differential protection settings for power transformers." In 2015 Modern Electric Power Systems (MEPS). IEEE, 2015. http://dx.doi.org/10.1109/meps.2015.7477186.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

KOKSAL, Aysun, Aydogan OZDEMIR, and Joydeep MITRA. "A reliability-transient stability analysis of power systems for protection system conditions." In 2019 Modern Electric Power Systems (MEPS). IEEE, 2019. http://dx.doi.org/10.1109/meps46793.2019.9395040.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Whitehead, D., and N. Fischer. "Advanced commercial power system protection practices applied to naval medium voltage power systems." In 2005 IEEE Electric Ship Technologies Symposium. IEEE, 2005. http://dx.doi.org/10.1109/ests.2005.1524713.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Khorashadi-Zadeh, Hassan, Zuyi Li, and Vahid Madani. "Adaptive dependable and secure protection systems for electric power systems." In Exposition. IEEE, 2008. http://dx.doi.org/10.1109/tdc.2008.4517163.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Szablicki, M., P. Rzepka, A. Halinka, and P. Sowa. "Diagnosis of challenges for power system protection – selected aspects of transformation of power systems." In 2019 Modern Electric Power Systems (MEPS). IEEE, 2019. http://dx.doi.org/10.1109/meps46793.2019.9394979.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Amoda, Oluwaseun A., and Noel N. Schulz. "An Adaptive Protection Scheme for Shipboard Power Systems." In 2007 IEEE Electric Ship Technologies Symposium. IEEE, 2007. http://dx.doi.org/10.1109/ests.2007.372090.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Baran, Mesut E., Sercan Teleke, and Subhashish Bhattacharya. "Overcurrent Protection in DC Zonal Shipboard Power Systems using Solid State Protection Devices." In 2007 IEEE Electric Ship Technologies Symposium. IEEE, 2007. http://dx.doi.org/10.1109/ests.2007.372089.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Singh, Ayushi, Ankita Mohanty, and Chitra A. "Optimal Design of Electrical Safety and Protection Systems for Hybrid Electric Cars." In 2021 Innovations in Power and Advanced Computing Technologies (i-PACT). IEEE, 2021. http://dx.doi.org/10.1109/i-pact52855.2021.9696670.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Electric power systems – Protection"

1

Reno, Matthew, Miguel Jimenez Aparicio, Felipe Wilches-Bernal, Javier Hernandez Alvidrez, Armando Montoya, Pedro Barba, Jack Flicker, et al. Signal-Based Fast Tripping Protection Schemes for Electric Power Distribution System Resilience. Office of Scientific and Technical Information (OSTI), September 2022. http://dx.doi.org/10.2172/1890046.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Phadke, A., S. Horowitz, and J. Thorp. Integrated hierarchical computer systems for adaptive protective relaying and control of electric transmission power systems. Office of Scientific and Technical Information (OSTI), November 1989. http://dx.doi.org/10.2172/5382017.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Rodgers, John, and Edo Waks. Protection of Electronic Systems from the Effects of High-Power Microwave (HPM) and Ultra-Wideband (UWB) Sources. Fort Belvoir, VA: Defense Technical Information Center, March 2012. http://dx.doi.org/10.21236/ada567604.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Elwood, D. M. ElGENANALYSlS OF LARGE ELECTRIC POWER SYSTEMS. Office of Scientific and Technical Information (OSTI), February 1991. http://dx.doi.org/10.2172/1086621.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bass, Robert, and Nicole Zimmerman. Impacts of Electric Vehicle Charging on Electric Power Distribution Systems. Portland State University Library, September 2013. http://dx.doi.org/10.15760/trec.145.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hladky, Mark. HFA-PFC Systems for Tactical Mobile Electric Power Systems. Fort Belvoir, VA: Defense Technical Information Center, September 1995. http://dx.doi.org/10.21236/ada362270.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Lesieutre, Bernard C., and Daniel K. Molzahn. Optimization and Control of Electric Power Systems. Office of Scientific and Technical Information (OSTI), October 2014. http://dx.doi.org/10.2172/1159823.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Elwood, D. M. Stability analysis of large electric power systems. Office of Scientific and Technical Information (OSTI), January 1993. http://dx.doi.org/10.2172/6853993.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Elwood, D. M. Stability analysis of large electric power systems. Office of Scientific and Technical Information (OSTI), January 1993. http://dx.doi.org/10.2172/10127614.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Reddoch, T. W., and L. C. Markel. HEMP emergency planning and operating procedures for electric power systems. Power Systems Technology Program. Office of Scientific and Technical Information (OSTI), December 1991. http://dx.doi.org/10.2172/10151007.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Electric power systems – Protection' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography