Journal articles: 'Electric power facilities'

1

MIKAMI, Yasuo. "Electric Power Facilities and Weather." Wind Engineers, JAWE 2008, no. 114 (2008): 3–4. http://dx.doi.org/10.5359/jawe.2008.3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Kaliberda, I. V., S. S. Nefedov, and A. V. Pomerantsev. "Problems of Ensuring Seismic Resistance of Power Grid Facilities during Earthquakes." Occupational Safety in Industry, no. 10 (October 2020): 40–47. http://dx.doi.org/10.24000/0409-2961-2020-10-40-47.

Full text

Abstract:

The electric grid system is the basis for functioning of the Unified electric power system of Russia and technologically isolated electric power systems. One of the most serious problems in the electric power industry is the aging of the fixed assets of already built and operating power grid facilities. The second problem is to clarify the seismic hazard of the territories of the Russian Federation in the direction of its growth. As a result, the number of power grid facilities fall into the zones of increased seismic hazard. In the zone of 7 points or more, approximately 30 % of the entire length of electric networks and transformer capacities are located. Information is provided about the characteristics of seismic load and how the objects respond to an earthquake. The experience of earthquakes testifies to the high vulnerability of the overhead power lines, cable power lines, substations, power transformers, relay protection equipment and automation under intense seismic loads. Information is provided about massive damage to the power grid during earthquakes in the territory of Russia, Armenia, and other countries of the world. Frequently occurring short circuits during earthquakes in electrical networks, at transformer substations, in electrical equipment elements of power grid facilities lead to fires. It is determined that power grid facilities have less seismic resistance than electric power generation facilities, than buildings and structures where electrical equipment is located. The problem of insufficiency of the current regulatory framework for ensuring seismic resistance of electric power facilities was also identified. Possible measures to prevent accident rate and increase the resistance, reliability, and seismic stability of power grid facilities in case of earthquakes are considered. The development of normative regulation will allow to take measures to ensure the seismic stability of power grid facilities in operation, and to ensure that control and supervision activities are carried out at a higher level.

APA, Harvard, Vancouver, ISO, and other styles

3

Sovey, James S., Robert H. Vetrone, Stanley P. Grisnik, Roger M. Myers, and James E. Parkes. "Test facilities for high-power electric propulsion." Journal of Propulsion and Power 10, no. 1 (January 1994): 18–24. http://dx.doi.org/10.2514/3.23706.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

SUGIYAMA, TAKESHI. "Noise Reduction Design of Electric Power Facilities." Journal of the Institute of Electrical Engineers of Japan 123, no. 8 (2003): 505–8. http://dx.doi.org/10.1541/ieejjournal.123.505.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Evseev, A. M., V. N. Meshcheryakov, and A. I. Boikov. "Electric-Power-Quality Characteristics of Industrial DC Electric-Arc Facilities." Russian Electrical Engineering 92, no. 12 (December 2021): 772–77. http://dx.doi.org/10.3103/s1068371221120063.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Istomin, S. G., and A. E. Perestenko. "Assessment of the electric power loss components by the electric stock and electric power supply facilities." Proceedings of Petersburg Transport University 17, no. 3 (September 2020): 387–96. http://dx.doi.org/10.20295/1815-588x-2020-3-387-396.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Suzuki, Hideyo. "New Aseismic Design Technology for Electric Power Facilities." IEEJ Transactions on Power and Energy 110, no. 6 (1990): 460–64. http://dx.doi.org/10.1541/ieejpes1990.110.6_460.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

KUROSAWA, Kiyoshi. "Fiber-Optic Current Sensors for Electric Power Facilities." Review of Laser Engineering 24, Supplement (1996): 311–14. http://dx.doi.org/10.2184/lsj.24.supplement_311.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

KUROSAWA, Kiyoshi. "Optical Fiber Current Sensors for Electric Power Facilities." Review of Laser Engineering 33, no. 9 (2005): 592–97. http://dx.doi.org/10.2184/lsj.33.592.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Watanabe, Kaoru. "Lighting Facilities of Tohoku Electric Power Head Office." JOURNAL OF THE ILLUMINATING ENGINEERING INSTITUTE OF JAPAN 87, no. 7 (2003): 477–79. http://dx.doi.org/10.2150/jieij1980.87.7_477.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Sarkisov, Ashot A., Sergey V. Antipov, Dmitry O. Smolentsev, Vyacheslav P. Bilashenko, Mikhail N. Kobrinsky, Vladimir A. Sotnikov, and Pavel A. Shvedov. "Low-power nuclear power plants in the context of electric power systems transformation." Nuclear Energy and Technology 7, no. 1 (March 30, 2021): 55–59. http://dx.doi.org/10.3897/nucet.7.65315.

Full text

Abstract:

Increasing economic importance of the Arctic, further intensification of northern sea routes, and exceptional sensitivity of the arctic natural environment to anthropogenic impacts are fundamental factors for a comprehensive study of environmental aspects in the application of innovative technologies for the development of infrastructure in the Arctic. Despite the growing interest in low-power nuclear power plants as a distributed generation facility, their possible application in technologically isolated power systems does not lose relevance. The development of both the Arctic and Far Eastern regions of the Russian Federation presents great opportunities and demand for the use of nuclear power sources. Also, development programs for the Russian arctic zone imply a significant increase in the role and number of nuclear power facilities, in other words of potential radiation-hazardous facilities. Large-scale use of nuclear-powered installations in the Arctic necessitates advanced development of a scientifically grounded and modern forecasting system as well as assessments of threats and risks in case of possible radiation emergencies at nuclear- and radiation-hazardous facilities. Also, the development of proposals for necessary measures to minimize negative consequences of such emergencies is required. This is especially true for the case of compact placement of industrial, infrastructure and residential facilities in the Arctic in the immediate vicinity of nuclear facilities. The paper demonstrates that the demand for low-power nuclear power plants and their competitiveness will grow steadily in the conditions of electric-power industry decentralization, further spread of distributed generation and the development of technologically isolated power systems. Approaches to the generation of a low nuclear-power system based on the philosophy of industrialization of production and centralized management are presented. Special features of the environmental impact assessment of low-power nuclear power plants for the development of a methodology to study the radio-ecological hazard related problems are provided.

APA, Harvard, Vancouver, ISO, and other styles

12

Gilfanov, K. H., N. Tien, R. N. Gaynullin, and I. Hallyyev. "Energy efficient heat supply system for electric power facilities." E3S Web of Conferences 124 (2019): 01011. http://dx.doi.org/10.1051/e3sconf/201912401011.

Full text

Abstract:

The aim of the work is to confirm the possibility of creating an energy-saving heat supply system for power facilities by using computer modelling, analysis of the potential use of heat losses of electromagnetic energy in magnetic circuits and windings of transformers of substations, as well as the development of schemes for heat recovery losses for heat supply of power facilities. Computer simulation of electromagnetic and thermophysical processes in the power oil-filled transformer is carried out. Energy losses in windings, hysteresis and eddy currents in the magnetic circuit, as well as temperature and heat flux fields in the longitudinal and transverse sections of the oil-filled power transformer in idle and short-circuit modes were determined. The transformer performance in terms of heat recovery losses was evaluated. The possible volumes of heat extraction for heat supply depending on the power of the transformer are determined. The automated oil-water system of heat recovery of the transformer for heating of electric power facilities is proposed. The significance of the obtained results for the construction industry is to confirm the possibility of creating an energy-saving heat supply system for electric power facilities while maintaining the operational characteristics of the transformer based on computer modelling; the significant potential of using the heat loss of power transformers of substations is shown, an automated heat supply system for electric power facilities is proposed.

APA, Harvard, Vancouver, ISO, and other styles

13

HONMA, HIROYA. "Application of Polymeric Insulation Materials for Electric Power Facilities." Journal of the Institute of Electrical Engineers of Japan 120, no. 3 (2000): 152–55. http://dx.doi.org/10.1541/ieejjournal.120.152.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Maksimenko, Pyotr. "Construction of Electric Power Facilities: Law Enforcement Practice Issues." Energy law forum 2015, no. 2 (May 5, 2015): 57–59. http://dx.doi.org/10.18572/2410-4396-2015-2-57-59.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Gong, Dan, Chuang Zhang, Jian Ma, Congyu Zhang, Xinyu Liu, and Shuai Guo. "Accurate Measurement of DC Electric Energy in Power Plant." Journal of Physics: Conference Series 2218, no. 1 (March 1, 2022): 012029. http://dx.doi.org/10.1088/1742-6596/2218/1/012029.

Full text

Abstract:

Abstract With the development of electric vehicles, the corresponding charging facilities are gradually accelerating the construction. Aiming at the corresponding problems existing in the domestic electric vehicle charging facilities, such as management and control, operation and maintenance and testing, this paper studies the integrated test system for AC / DC charging facilities, and introduces the design concept, hardware scheme, software scheme and processor platform of the system in detail. The system is based on GB/T18487.1-2015, NB/T33008-2018 and other test standards, and can be used for type experiments and performance tests of charging piles. The research results in this paper are conducive to the development of charging inspection facilities in the direction of integration, digitization, and automation. It is of great significance for charging facilities to reduce operation and maintenance costs and improve charging service level. It is conducive to promoting and ensuring the sustainable development of the domestic electric vehicle industry and the needs of implementing China’s long-term development plan and energy conservation and emission reduction policies.

APA, Harvard, Vancouver, ISO, and other styles

16

Zakharov, Sergei, Dmitriy Kudryashov, Viktor Brodt, Ivan Pascar, and Vyacheslav Voronin. "Analysis of Accidents in 6-110 KV Electric Networks of Kuzbass Power System." E3S Web of Conferences 41 (2018): 03015. http://dx.doi.org/10.1051/e3sconf/20184103015.

Full text

Abstract:

Power system of the Kemerovo region is unique in terms of the number of hazardous production facilities (coal mines, coal pit). To ensure trouble-free operation of hazardous production facilities and the normal operation of other consumers, it is necessary to ensure reliable operation of regional electrical grid networks. Based on reports on technological disruptions in electric networks of the Kemerovo region in 2015, performed analysis of accidents in 6-110 kV electric networks of Kuzbass power system. The statistics of the technological disruptions in terms of voltage classes, damaged elements, causes of occurrence, time to recovery and the number of outages of household consumer, are given. Conclusions were drawn about the high level of accident rate in 6-10 kV electrical network.

APA, Harvard, Vancouver, ISO, and other styles

17

Cazacu, Emil, Lucian Petrescu, and Maria-Cătălina Petrescu. "THE MAJOR PREDICTIVE MAINTENANCE ACTIONS OF THE ELECTRIC EQUIPMENTS IN THE INDUSTRIAL FACILITIES." Scientific Bulletin of Electrical Engineering Faculty 18, no. 1 (April 1, 2018): 26–33. http://dx.doi.org/10.1515/sbeef-2017-0018.

Full text

Abstract:

Abstract In modern low-voltage electrical installations, the predictive maintenance of the major electrical equipments involved in the power delivery process (transformers) or in the conversion of the electrical energy (especially electric motors) becomes mandatory. Thus, a high level of reliability and safety is assured for both the electric facility and operators. The proactive maintenance is to be non-invasively performed and mainly requires an infrared (IR) thermographic inspection and power quality analysis of the installation loads. A vibration investigation is also necessary for the motor drive systems. The paper critically studies the first two main maintenance procedures revealing their main characteristics, performances and limits. A case-study presents a 1000 kVA distribution transformer that supplies a bakery facility that comprised mainly heaters and inductions motors as loads.

APA, Harvard, Vancouver, ISO, and other styles

18

Hamad, Kareem. "A House Solar Power Station." Journal of Al-Rafidain University College For Sciences ( Print ISSN: 1681-6870 ,Online ISSN: 2790-2293 ), no. 1 (October 22, 2021): 5–18. http://dx.doi.org/10.55562/jrucs.v27i1.397.

Full text

Abstract:

Solar energy is one of the main power sources of electricity in the world. It has become widespread as an attractive solution to provide low power consumption to human groups live in remote villages or areas away from the national electric grid, also when the electric power is underproduction such as in our country (Iraq). For this reasons we designed a system of photovoltaic generator with facilities to be built in houses. The system consists of three basic parts of equipment, 3KW peak solar panels, which could be spread easily at the housetop, a storage battery system and the electrical control system. The electrical control system was completely designed and tested using ORCAD simulator, it consists of 4KW battery charge regulator with 300V system, and 220V, 50Hz transformerless three – level square wave inverter.

APA, Harvard, Vancouver, ISO, and other styles

19

Olesova, M. M., and I. P. Ivanova. "Registration of security zones of power grid facilities." Zemleustrojstvo, kadastr i monitoring zemel' (Land management, cadastre and land monitoring), no. 9 (September 1, 2020): 29–31. http://dx.doi.org/10.33920/sel-4-2009-04.

Full text

Abstract:

The article deals with the registration issues of security zones of power lines and power distribution points as objects of power system. The procedure for drawing up a map (plan) of an electric grid facility has been studied and distributed in stages.

APA, Harvard, Vancouver, ISO, and other styles

20

Sednev, V. A. "Justification of methods for calculating electrical loads life support systems for the affected population and rescue units during field deployment." Technology of technosphere safety 94 (2021): 156–71. http://dx.doi.org/10.25257/tts.2021.4.94.156-171.

Full text

Abstract:

Introduction. Over the past twenty years, the most severe natural and man-made disasters have occurred in various regions of the country and the world, as a result of which people were deprived of housing. The increase in the number, scale and duration of the consequences of emergencies related to the violation of the conditions of normal living of people requires the creation of temporary field accommodation points for the affected population, which create and serve rescue formations. At the same time, in the complex of tasks aimed at the life support of the population and rescue units in field temporary accommodation facilities, their electric power supply plays an important role. However, the established practice of calculating the electrical loads of stationary objects by methods based on data on separate electrical receivers makes it difficult to determine them for a field temporary location of people due to the lack of reliable information on its electrical receivers, which leads to significant errors in calculations, irrational composition of the electrical supply system and the use of its elements against the background of restrictions in the use of local energy resources and infrastructure facilities, which themselves may experience difficulties with reliable power supply due to the limited capacity of local power systems. The purpose of the study. Electric power supply and electric power safety of field temporary accommodation points of the affected population and rescue units, ensuring the required reliability of electric power supply, maximizing its efficiency in conditions of possible resource constraints and minimizing the influence of the uncertainty factor when planning power consumption. Research methods. The main provisions of the calculation of electrical loads, systems theory, set theory, probability theory and the apparatus of mathematical statistics. The results of the study. A methodology has been developed that allows to justify the power consumption of a temporary field accommodation facility for people, while the construction of its life support power supply system is carried out in accordance with the available consumers, taking into account their composition, area and other factors affecting the organization of the power supply system and the construction of consumers. Conclusion. The scientific and methodological approach to the choice of methods for calculating the electrical loads of the life support system of the affected population and rescue units during field deployment is substantiated, which also allows to resolve the contradiction between the need to organize the power supply of their life support and the lack of reasonable standards of power consumption of life support facilities and methods of their calculation. Key words: temporary field accommodation, life support, electric energy consumers, electric power supply, organization.

APA, Harvard, Vancouver, ISO, and other styles

21

Kurbatsky, Victor. "Application of Integrated Hardware and Software System "PRIZNAK-10M" for Measuring Power-Frequency Electric and Magnetic Fields in Electric Networks." Scientific Journal of Riga Technical University. Power and Electrical Engineering 27, no. 1 (January 1, 2010): 102–7. http://dx.doi.org/10.2478/v10144-010-0030-2.

Full text

Abstract:

Application of Integrated Hardware and Software System "PRIZNAK-10M" for Measuring Power-Frequency Electric and Magnetic Fields in Electric NetworksOne of the urgent problems in modern power industry is to provide safety of man staying in the affected area of electric and magnetic fields generated by operating electric facilities. The paper presents integrated hardware and software system "PRIZNAK-10M", intended for measurement of power-frequency electric and magnetic fields in electric networks. Integrated hardware and software system put into practice the methods of measurements, met the regulatory documents effected in electric networks of Russia. The recommendations have been developed to provide the man safely at the facilities studied.

APA, Harvard, Vancouver, ISO, and other styles

22

Boskovic, Aleksandar, and Slavko Dubackic. "Video surveillance system and access control in electric power facilities." Civitas (Novi Sad) 7, no. 1 (2017): 65–78. http://dx.doi.org/10.5937/civitas1701065b.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Borkovskaya, Victoria G., and Anton Skrynnik. "Qualitative risk approach in the construction of electric power facilities." IOP Conference Series: Materials Science and Engineering 896 (August 13, 2020): 012075. http://dx.doi.org/10.1088/1757-899x/896/1/012075.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Sabitov, L. S., P. P. Pavlov, V. P. Fandeyev, V. M. Butakov, A. N. Khusnutdinov, and A. S. Siyetinskaya. "Methods of Optimizing the Troubleshooting Parameters of Electric Power Facilities." IOP Conference Series: Materials Science and Engineering 915 (September 16, 2020): 012047. http://dx.doi.org/10.1088/1757-899x/915/1/012047.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Liu, Zhen Huan, Yao Lu, Hui Chun Xie, Jian Gong Zhang, Hao Wan, Yu Long Chen, and Rui Huang. "Study on Pre-Processing Method and Software Platform Development for Three-Dimensional Finite Element of Electric Transmission Lines Based on Solid Modeling." Applied Mechanics and Materials 716-717 (December 2014): 1446–50. http://dx.doi.org/10.4028/www.scientific.net/amm.716-717.1446.

Full text

Abstract:

Through the implementation of algorithm based on B-Rep three-dimensional solid modeling techniques, combination with substation, pole tower, electric transmission line and other electric power facilities, C# is used as the main development language and Microsoft Visual Studio2013 is applied to develop three-dimensional solid modeling software of electric power facilities to serve as pre-processing part of CAE system and provide software technology support for finite element analysis.

APA, Harvard, Vancouver, ISO, and other styles

26

Diamenu, Godwin. "Statistical Analysis of Electric Power Distribution Grid Outages." European Journal of Engineering and Technology Research 6, no. 3 (April 12, 2021): 27–33. http://dx.doi.org/10.24018/ejers.2021.6.3.2406.

Full text

Abstract:

Power systems in general supply consumers with electrical energy as economically and reliably as possible. Reliable electric power systems serve customer loads without interruptions in supply voltage. Electric power generation facilities must produce enough power to meet customer demand. Electrical energy produced and delivered to customers through generation, transmission and distribution systems, constitutes one of the largest consumers markets the world over. The benefits of electric power systems are integrated into the much faster modern life in such extent that it is impossible to imagine the society without the electrical energy. The rapid growth of electric power distribution grids over the past few decades has resulted in a large increment in the number of grid lines in operation and their total length. These grid lines are exposed to faults as a result of lightning, short circuits, faulty equipment, mis-operation, human errors, overload, and aging among others. A fault implies any abnormal condition which causes a reduction in the basic insulation strength between phase conductors or phase conductors and earth, or any earthed screens surrounding the conductors. In this paper, different types of faults that affected the electric power distribution grid of selected operational districts of Electricity Company of Ghana (ECG) in the Western region of Ghana was analyzed and the results presented. Outages due to bad weather and load shedding contributed significantly to the unplanned outages that occurred in the medium voltage (MV) distribution grid. Blown fuse and loose contact faults were the major contributor to unplanned outages in the low voltage (LV) electric power distribution grid.

APA, Harvard, Vancouver, ISO, and other styles

27

Diamenu, Godwin. "Statistical Analysis of Electric Power Distribution Grid Outages." European Journal of Engineering and Technology Research 6, no. 3 (April 12, 2021): 92–98. http://dx.doi.org/10.24018/ejeng.2021.6.3.2406.

Full text

Abstract:

Power systems in general supply consumers with electrical energy as economically and reliably as possible. Reliable electric power systems serve customer loads without interruptions in supply voltage. Electric power generation facilities must produce enough power to meet customer demand. Electrical energy produced and delivered to customers through generation, transmission and distribution systems, constitutes one of the largest consumers markets the world over. The benefits of electric power systems are integrated into the much faster modern life in such extent that it is impossible to imagine the society without the electrical energy. The rapid growth of electric power distribution grids over the past few decades has resulted in a large increment in the number of grid lines in operation and their total length. These grid lines are exposed to faults as a result of lightning, short circuits, faulty equipment, mis-operation, human errors, overload, and aging among others. A fault implies any abnormal condition which causes a reduction in the basic insulation strength between phase conductors or phase conductors and earth, or any earthed screens surrounding the conductors. In this paper, different types of faults that affected the electric power distribution grid of selected operational districts of Electricity Company of Ghana (ECG) in the Western region of Ghana was analyzed and the results presented. Outages due to bad weather and load shedding contributed significantly to the unplanned outages that occurred in the medium voltage (MV) distribution grid. Blown fuse and loose contact faults were the major contributor to unplanned outages in the low voltage (LV) electric power distribution grid.

APA, Harvard, Vancouver, ISO, and other styles

28

Lukaitis, V. Yu, and S. Yu Glushkov. "Autonomous power generation facilities, hybrid structures comprising renewable energy sources." Power and Autonomous equipment 2, no. 2 (June 30, 2019): 111–20. http://dx.doi.org/10.32464/2618-8716-2019-2-2-111-120.

Full text

Abstract:

Introduction: the implementation of land development programmes in the polar regions, Siberia andFar East turns more complex due to power shortages in these areas. High electric energy rates and the need to maintain special purpose buildings encourage engineers to develop autonomous energy supply systems.Methods: the co-authors have analyzed several types of autonomous power supply facilities and series of autonomous power supply units designated for the power supply to the production machinery installed as part of various economic and special-purpose facilities, located at a long distance from industrial sources of electric energy.Findings and discussion: the co-authors present an algorithm for the selection of the configuration of an autonomous power supply system. The co-authors employ the findings of their analysis to substantiate the choice of a solar power station as a supplementary source of energy used as part of hybrid power generation systems.Conclusion: the algorithm developed by the co-authors may be used to design an efficient autonomous power supply system comprising hybrid units.

APA, Harvard, Vancouver, ISO, and other styles

29

Song, Wei, and Xin He Chen. "Design and Implementation of the Management Platform for Electric Vehicle and Charging Electric Facilities." Applied Mechanics and Materials 241-244 (December 2012): 1987–91. http://dx.doi.org/10.4028/www.scientific.net/amm.241-244.1987.

Full text

Abstract:

In order to achieve the management of electric vehicle and related operating facilities to solve the problem that the information of different electric vehicle charging stations cannot be shared, the problem of information silos, this paper designs and implements the CAN bus based electric vehicle charging station management platform, this platform can monitor electric vehicle and facilities, collect real-time data and make analysis and statistics to solve the problem of information silos of electric vehicle and charging exchange power facilities information sharing and reduce the effect of electric vehicle charging to grid. This platform using Struts, Hibernate and Ajax technology. This platform has been applied to Chengdu charging station, which proves the feasibility and effectiveness of the platform.

APA, Harvard, Vancouver, ISO, and other styles

30

Tanaka, K., Y. Mizuno, and K. Naito. "Measurement of Power Frequency Electric and Magnetic Fields Near Power Facilities in Several Countries." IEEE Transactions on Power Delivery 26, no. 3 (July 2011): 1508–13. http://dx.doi.org/10.1109/tpwrd.2010.2078836.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Белей, В. Ф., М. С. Харитонов, and Р. О. Брижак. "Power quality improvement recommendations for shipboard power systems." MORSKIE INTELLEKTUAL`NYE TEHNOLOGII), no. 4(50) (December 17, 2020): 55–61. http://dx.doi.org/10.37220/mit.2020.50.4.073.

Full text

Abstract:

В настоящее время на судах и объектах морской индустрии широко внедряется энергосберегающее электрооборудование, что позволяет добиться резкого снижения расхода электроэнергии и массогабаритных показателей оборудования, существенно расширяет функциональные возможности электротехнических комплексов и систем, приводит к улучшению эксплуатационных характеристик. Однако использование новейших энергосберегающих технологий, основанных на нелинейных элементах, и коммутация электрооборудования приводит к ухудшению качества электрической энергии в судовой электроэнергетической системе. В то же время, растет число потребителей, предъявляющих к качеству электроэнергии повышенные требования. В итоге, работа судовых энергокомплексов может отличаться от расчетной, а в ряде случаев становится аварийной. В работе приведены результаты экспериментальных исследований показателей качества электрической энергии в судовой электроэнергетической системе учебного парусного судна «Крузенштерн». Представлены результаты лабораторных исследований на физической модели судовой электростанции с источниками электромагнитных помех, обоснованы организационные и технические решения по снижению уровня электромагнитных помех в судовых электроэнергетических системах. Nowadays, energy-saving electrical equipment is widely introduced on ships and maritime industry facilities. It leads to a decrease in power consumption, weight and dimensions of equipment, significantly expands the functionality of electrical complexes and systems, and provides improvement of operational characteristics. However, the use of the latest energy-saving technologies based on non-linear elements and the switching of electrical equipment leads to a deterioration in the quality of electrical energy in the ship's electric power system. At the same time, the number of consumers with increased requirements for the quality of electricity is growing. As a result, the operation of ship power complexes may differ from the normal one, and in some cases it becomes emergency. The paper presents the results of experimental studies of electric power quality indicators in the ship's electric power system of the sail training ship "Kruzenshtern". The results of laboratory studies on a physical model of a ship power plant with sources of electromagnetic interference are presented, organizational and technical solutions to reduce the level of electromagnetic interference in ship power systems are substantiated.

APA, Harvard, Vancouver, ISO, and other styles

32

Konovalov, Yuriy, Anton Vaygachev, Angelina Tihonova, and Dmitriy Zhil'nikov. "CLOUD TECHNOLOGIES AND THEIR ROLE IN DIGITALIZATION OF ELECTRIC POWER FACILITIES." Bulletin of the Angarsk State Technical University 1, no. 14 (December 15, 2020): 22–25. http://dx.doi.org/10.36629/2686-777x-2020-1-14-22-25.

Full text

Abstract:

The model of cloud computing and the principle of its operation in relation to the energy service of the enterprise are considered. The classification of cloud technology categories is presented. The main features of using cloud technologies in enterprises, as well as information security in their work, are studied. The assessment of existing projects in the energy sector, as well as options for implementation in the Irkutsk region.

APA, Harvard, Vancouver, ISO, and other styles

33

Gibadullin, A. A., Yu V. Erygin, A. E. Polyakov, and S. A. Pobyvaev. "Monitoring the technical and technological state of electric power complex facilities." IOP Conference Series: Materials Science and Engineering 862 (May 28, 2020): 022050. http://dx.doi.org/10.1088/1757-899x/862/2/022050.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Tell, R. A., H. C. Hooper, G. G. Sias, G. Mezei, P. Hung, and R. Kavet. "Electromagnetic Fields Associated with Commercial Solar Photovoltaic Electric Power Generating Facilities." Journal of Occupational and Environmental Hygiene 12, no. 11 (October 12, 2015): 795–803. http://dx.doi.org/10.1080/15459624.2015.1047021.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Shpenst, V. A., O. Yu Morozova, and A. A. Beloshitsky. "Devices for diagnostics of electric power facilities using unmanned aircraft systems." Izvestiâ vysših učebnyh zavedenij. Priborostroenie 64, no. 6 (June 30, 2021): 503–8. http://dx.doi.org/10.17586/0021-3454-2021-64-6-503-508.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Kaganov, W. I., and Bui Huu Chuc. "Wireless power transmission." Russian Technological Journal 8, no. 6 (December 18, 2020): 47–53. http://dx.doi.org/10.32362/2500-316x-2020-8-6-47-53.

Full text

Abstract:

Electrical energy from power plants to industrial facilities and settlements is mostly transmitted by wire-connected air or underground lines covering vast territories. However, in some rare cases there is a need for wireless transmission of electrical power to objects located in hard-to-reach areas. The problem of wireless transmission of electrical energy will become especially urgent as space electric power industry based on the placement of solar power plants in outer space is being developed. In this regard, several countries are conducting studies on the problem of electrical energy transmission using both laser and microwave radiation. The fundamentals of building systems for wireless transmission of electrical energy over short distances using microwave radiation are considered. Two options for constructing such systems are analyzed and calculated: using parabolic antennas and using phased array antennas. For both options the main parameters of systems for wireless transmission of electrical energy at 200 m were calculated. In the first case, powerful microwave devices are used: a magnetron or a direct-flight klystron; in the second case, microwave powerful field-effect transistors. For the second option the summation of the powers of microwave generators by means of their mutual synchronization is proposed.

APA, Harvard, Vancouver, ISO, and other styles

37

Liu, Yunjia. "Analysis and Research on Power Supply Strategies of Electric Vehicles Based on Wind Farms." World Electric Vehicle Journal 13, no. 2 (February 15, 2022): 38. http://dx.doi.org/10.3390/wevj13020038.

Full text

Abstract:

The widespread growth of electric vehicles could pose significant grid and charging infrastructure challenges, especially in areas with underdeveloped infrastructure. This has affected the ease of charging electric vehicles. In this paper, I design a power supply strategy for electric vehicle charging facilities based on wind farm power supply. In this strategy, a preliminary selection of line conductors is carried out, and several schemes are preliminarily determined. Further comparative analysis is made from the three aspects of conductor, tower type, and bus. Through the PowerWorld software, a simulation model is established for each scheme, and an optimal strategy that takes into account economy, security, and system stability is obtained (AAC 31.5 mm double split, tower A and bus 5). This can assist in the transformation of electric vehicle power supply and the construction of wind farm power supply facilities.

APA, Harvard, Vancouver, ISO, and other styles

38

Bryukhan, Fedor, and Mariya Amirkhanyan. "Technogenic electromagnetic impact zones of electric grid facilities." MATEC Web of Conferences 193 (2018): 02017. http://dx.doi.org/10.1051/matecconf/201819302017.

Full text

Abstract:

Introduction of technogenic physical fields including electromagnetic fields (EMF) to the environment can have an adverse impact on both humans and environment. Development of safety tools protecting against EMF impact involves studying their intensity and assessing EMF spatial extent. This paper proposes a definition of an EMF technogenic impact zone (TIZ) concept based on the instruments lower sensitivity threshold. The paper gives the results of EMF TIZ width assessment based on the measurements of EMF electric and magnetic components intensity generated by power line communication (PLC) along its 200-meter section. The EMF TIZ width was found to be homogeneous along the PLC section. It is noted that the proposed interpretation of EMF TIZ and method of its determination can be generalized for other EMF sources as well, for example, for SHF-radiation sources, tele-and radio-transmission facilities, mobile communication antennas, etc.

APA, Harvard, Vancouver, ISO, and other styles

39

Domanskyi, I., and О. Kozlova. "DEVELOPMENT PROSPECTS OF EXTERNAL POWER SUPPLY ELECTRICAL NETWORKS OF TRACTION SUBSTATIONS." Municipal economy of cities 1, no. 154 (April 3, 2020): 8–15. http://dx.doi.org/10.33042/2522-1809-2020-1-154-8-15.

Full text

Abstract:

In the paper on the basis of the analysis of classical power schemes traction substations of railways and urban electric transport conceptual directions of development of electric networks of external power supply of traction substations in the conditions of market economy and normative requirements of the electric power industry of Ukraine are developed, which allow to provide energy saving modes of their operation. Based on system analysis of domestic and foreign traction power supply systems of railways and electric transport of large cities, the concept of their development is substantiated and proposed by increasing the supply voltage of traction substations and minimizing capacity upflows and energy losses, which provides resource and energy savings. It is suggested that the investment programs of the structures that are part of Corporation «Ukrzaliznytsia» and the municipal services be synchronized according to their technological indicators, as well as according to the criteria of energy efficiency and quality of energy supply with similar investment programs of external energy. For reduction of energy losses, it is proposed: realization of rational schedule of train movement and deep high voltage inputs with the prospect of transition to own 110 kV distribution networks, modernization and equipping of modern rolling stock electrical equipment and infrastructure of the main and perspective directions of the railways. The need to expand tram and trolleybus lines and modernize power supply devices in terms of resource conservation requires new technologies for the design, construction and operation of the facilities of municipal enterprise «Miskelektrotransservice». Such technologies have been implemented by the «DAK-Energetika» enterprise in the manufacture of modern electrical equipment of municipal enterprise «Miskelektrotransservice» TS. The most important tasks are the improvement of stationary and mobile substations and other linear facilities of traction power supply by completing functional modular blocks with modern switchgear with digital relay protection and diagnostics of traction networks; local and remote control of switchgear devices, as well as switch diagnostics and self-diagnosis. Keywords: external power supply, traction substations, electrical networks, power systems operation modes.

APA, Harvard, Vancouver, ISO, and other styles

40

Wen, G., F. Zhou, H. Zhang, H. Pan, J. Cao, Z. Gao, Y. Liu, Z. Sun, and L. Pei. "BIO-INSPIRED MULTIPLE SCALES PLACE RECOGNITION FOR ELECTRIC SUBSTATIONS." International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLVI-3/W1-2022 (May 5, 2022): 315–21. http://dx.doi.org/10.5194/isprs-archives-xlvi-3-w1-2022-315-2022.

Full text

Abstract:

Abstract. We could get many helpful information and results from satellite remote sensing images and aerial images, including disaster monitoring, grid hidden danger identification, and electricity consumption management. In the recent years, novel computer vision and deep neural network have got a lot of attention in many fields because of mimicking mammalian cognitive mechanism as much as possible. With the in-depth of mammalian cognitive and motor mechanisms research, people trend to adopt these reliable and efficient methods for power grid management and maintenance.For utilizing computing resources and improving analysing efficiency flexibly, we propose an assessing and verification framework based on bio-inspired perception and understanding, which summarizes the most appropriate image scale in the electric facilities place recognition. The proposed framework consists of different scenes aerial images datasets, several electric facilities place recognition methods, and credible evaluating methods mimicking mammals. Firstly, we gather satellite remote images and aerial images of sufficient electric power facilities in the United States via Google Earth and other public datasets. Then, several typical place recognition methods are adopted to testing recognition ability of multi-scale perception results, like SAD, NetVLAD, and GIST descriptor. To get more reliable result, multi-units and multi-scenes experiments are implemented roundly. After all experiments and evaluations, we could get that the most appropriate image scale is 1000 m size and the highest recognition accuracy of electric power facilities location is 500 m. Conclusion in our article shows the recommended perception form and scale closest to human cognition in the power grid management and maintenance.

APA, Harvard, Vancouver, ISO, and other styles

41

Gritsay, Alexander, Evgeny Chebanenko, Viktor Potapov, Elena Andreeva, Rustam Khamitov, and Igor Chervenchuk. "On the development of a software and hardware complex for modeling a power grid controller and microgeneration facilities based on renewable energy sources in LV 0,4 kV networks." Analysis and data processing systems, no. 1 (March 26, 2021): 61–72. http://dx.doi.org/10.17212/2782-2001-2021-1-61-72.

Full text

Abstract:

The article discusses the issues of connecting microgeneration facilities based on renewable energy sources (RES) to electric networks of low voltage (LV) 0,4 kV. This method of connection will allow the use of microgeneration facilities as network sources of energy, and at the same time unused electrical energy generated by micro-generation facilities can be supplied to a low-voltage network of 0,4 kV. Methods of simulation modeling of the processes of electrical energy distribution in the power supply system with microgeneration objects are proposed; the requirements for the power grid controller used to ensure the connection of micro-generation facilities to the low voltage network are formulated. The problems arising in connection with this are analyzed and the ways of their solution are offered. The proposed methods for the development of software and hardware solutions using modern methods of simulation of electrical energy generation and distribution based on rapid prototyping in the Matlab Simulink environment make it possible to carry out field experiments in order to simulate the processes occurring in 0,4 kV low voltage electrical networks using microgeneration objects prosumers.

APA, Harvard, Vancouver, ISO, and other styles

42

Wang, Qi. "The Research and Design of Unattended Intelligent Substation of Safety Monitoring System." Advanced Materials Research 912-914 (April 2014): 1469–72. http://dx.doi.org/10.4028/www.scientific.net/amr.912-914.1469.

Full text

Abstract:

This topic will be based on the characteristics of electric power facilities and computer systems, combined with the similarities between the power industry and power facilities, using the computer software, wireless sensor network and so on, to detect the various indicators of power equipment, including the temperature, degree of humidity on the tower, substation, etc., in order to achieve the real-time detection, alarm and other functions of the safety of power facilities in substation. Under the background of the power facilities having many advantages such as a great quantity, wide distribution and the rapid process of unattended. After the failure of power facilities , it will be helpful to find out the exact point of failure quickly, to restore power as quickly as possible. It has great practical value.

APA, Harvard, Vancouver, ISO, and other styles

43

Zhang, Ru Tong, and Teng Fei Yao. "Energy Model of Electric Vehicle Filling Station." Advanced Materials Research 608-609 (December 2012): 1618–22. http://dx.doi.org/10.4028/www.scientific.net/amr.608-609.1618.

Full text

Abstract:

With the increasingly grim world environmental degradation and energy crisis, the industrial development of electric vehicles and charging for electric facilities has risen to national strategy. Based on the introduction of electric vehicle energy supply mode, proposed for power mode is the main push of the State Grid Corporation of business model. The Large-scale construction of electric vehicle filling station presents a challenge to Power grid, but through the application of V2G technology, electric vehicle power battery become smart grid energy storage structure, strengthen the new energy, electric vehicle charging the relationship between the three power stations and smart grid, and accelerate the integration process among the three.

APA, Harvard, Vancouver, ISO, and other styles

44

Nizhegorodov, A. I. "CHARACTERISTICS OF ELECTRIC MOTORS, SYSTEMS OF HOISTING AND TRANSPORT, CONSTRUCTION, ROAD VEHICLES AND EQUIPMENT. THE THIRD LECTURE." Spravochnik. Inzhenernyi zhurnal, no. 280 (July 2020): 35–42. http://dx.doi.org/10.14489/hb.2020.07.pp.035-042.

Full text

Abstract:

The material for the third lecture on the subject “Theory of hoisting and transport, construction, road vehicles and equipment” is the main focus of the paper including the most important issues for the characteristics of electric motors of hosting and transport, construction, road facilities and equipment, for the calculation of power of electric motors with the criterion of the activation duration and selection of engines for RMS power. In addition, it considers systems of hosting and transport, construction, road facilities and equipment, namely their power and speed tackle gears and concerns the efficiency of movable and fixed blocks of rope systems.

APA, Harvard, Vancouver, ISO, and other styles

45

Nizhegorodov, A. I. "CHARACTERISTICS OF ELECTRIC MOTORS, SYSTEMS OF HOISTING AND TRANSPORT, CONSTRUCTION, ROAD VEHICLES AND EQUIPMENT. THE THIRD LECTURE." Spravochnik. Inzhenernyi zhurnal, no. 280 (July 2020): 35–42. http://dx.doi.org/10.14489/hb.2020.07.pp.035-042.

Full text

Abstract:

The material for the third lecture on the subject “Theory of hoisting and transport, construction, road vehicles and equipment” is the main focus of the paper including the most important issues for the characteristics of electric motors of hosting and transport, construction, road facilities and equipment, for the calculation of power of electric motors with the criterion of the activation duration and selection of engines for RMS power. In addition, it considers systems of hosting and transport, construction, road facilities and equipment, namely their power and speed tackle gears and concerns the efficiency of movable and fixed blocks of rope systems.

APA, Harvard, Vancouver, ISO, and other styles

46

Langston, Lee S. "Clear Skies Ahead." Mechanical Engineering 138, no. 06 (June 1, 2016): 38–43. http://dx.doi.org/10.1115/1.2016-jun-3.

Full text

Abstract:

This article discusses various fields where gas turbines can play a vital role. Building engines for commercial jetliners is the largest market segment for the gas turbine industry; however, it is far from being the only one. One 2015 military gas turbine program of note was the announcement of an U.S. Air Force competition for an innovative design of a small turbine engine, suitable for a medium-size drone aircraft. The electrical power gas turbine market experienced a sharp boom and bust from 2000 to 2002 because of the deregulation of many electric utilities. Since then, however, the electric power gas turbine market has shown a steady increase, right up to present times. Coal-fired plants now supply less than 5 percent of the electrical load, having been largely replaced by new natural gas-fired gas turbine power plants. Working in tandem with renewable energy power facilities, the new fleet of gas turbines is expected to provide reliable, on-demand electrical power at a reasonable cost.

APA, Harvard, Vancouver, ISO, and other styles

47

Grabchak, E. P., and E. L. Loginov. "Digital approaches to management of electric and thermal powerengineering facilities using intelligent cyberphysical systems." Safety and Reliability of Power Industry 12, no. 3 (November 22, 2019): 172–76. http://dx.doi.org/10.24223/1999-5555-2019-12-3-172-176.

Full text

Abstract:

The article outlines the technology of managing electric and thermal power-engineering facilities using intelligent cyberphysical systems, implemented by remote monitoring of operated facilities and based on the ability to assess the technical condition of each equipment item (introducing risk-oriented management based on digital technologies). The technology includes coupled digital solutions that allow to quickly assess and predict the condition of the power system by comparing individual assessment data of the technical condition of the main technological equipment of electric and thermal power-engineering facilities with digital counterparts of technological processes, physical systems, objects and products for the implementation of integrated risk-oriented asset management system (AMS). The analysis identifies indicators characterizing the solution to the problem of finding optimized values under fuzzy conditions and limitations, with an integral indicator of equipment (equipment group) determined by the minimum value with respect to assessing the technical condition of each item of equipment in a single unified digital network model. Based on the introduction of a virtual model for tracking the equipment life cycle, integrated with adaptive shells of applied digital business services, the management of both technological and economic business processes is being built to switch from planned preventive repair of equipment of electric and power-engineering facilities to state-based repair.

APA, Harvard, Vancouver, ISO, and other styles

48

OKUDA, Tohru. "Studies on the highly durable concrete. Dam structures as electric power facilities." Doboku Gakkai Ronbunshu, no. 384 (1987): 33–41. http://dx.doi.org/10.2208/jscej.1987.384_33.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Kato, Fujiwa, Takao Noguchi, Tetsuji Santo, Kazufumi Kaneda, and Eihachiro Nakamae. "Automatic Route Search Algorithm for Examination of Electric Power Facilities Installation Work." IEEJ Transactions on Electronics, Information and Systems 114, no. 2 (1994): 223–32. http://dx.doi.org/10.1541/ieejeiss1987.114.2_223.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Farhadzadeh, E. M., A. Z. Muradaliyev, and U. K. Ashurova. "Methodological basis of comparative analysis of unique facilities of electric power systems." Safety and Reliability of Power Industry 14, no. 1 (May 4, 2021): 20–26. http://dx.doi.org/10.24223/1999-5555-2021-14-1-20-26.

Full text

Abstract:

One of the basic problems of electric power systems is the absence of normative documents regulating the operation, maintenance and repair of the capital equipment, the service life of which exceeds the normative value. We shall name them «old equipment» (OE). The essence of the difficulties to be overcome is reduced to the absence of methodologies for quantitative estimation of operational reliability and safety of OE, with the subsequent comparative analysis of OE. Considering the science intensity, cumbersomeness and labour intensity of solving this problem, the necessity of development of the relevant automated systems becomes indisputable. In this article, some features are considered of an estimation of an integral indicator and comparative analysis of unique facilities. Here, unique facilities mean those, which have no analogues in terms of the set combination of varieties of significant attributes. The methodological foundations of the synthesis of integral indicators are considered: ensuring the infallibility of the information base; requirements to evaluations of integral indicators; providing the physical essence of the integral indicator; possible types of integral indicators; the comparison of integral indicators of operational efficiency in the framework of the theory of testing statistical hypotheses for one-dimensional random variables is associated with a high risk of erroneous decisions; the assessment of the critical values of the integral indicator is carried out on the basis of simulation modeling within the framework of the fiducial approach.The development of automated systems for collecting and formalizing data on the technical condition of OE, the automated analysis and synthesis of these data, performing standardization of TEI, evaluating integral indicators and some results of comparative analysis, preparing operational recommendations to improve work efficiency, developing appropriate methodological guidelines, indicate the possibility of an objective assessment of the operational efficiency of OE and a decrease in the risk of unacceptable consequences. For an illustration of recommended methods and algorithms, technical and economic parameters of power units with SGI-400 are used.

APA, Harvard, Vancouver, ISO, and other styles

Journal articles on the topic 'Electric power facilities'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles