Log in

Relevant bibliographies by topics / Electric monitoring / Journal articles

Journal articles on the topic 'Electric monitoring'

To see the other types of publications on this topic, follow the link: Electric monitoring.

Author: Grafiati

Published: 30 May 2022

Last updated: 31 May 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Electric monitoring.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Ferreira, Aracéli C. S., André L. Bufoni, Jazmin F. de La Cueva, Vinícius M. Maia, Dilo Vianna, and uliana M. Queiroz. "Assessing the Brazilian Electric Sector’s Financial Monitoring Milestone." International Journal of Trade, Economics and Finance 12, no. 2 (April 2021): 48–53. http://dx.doi.org/10.18178/ijtef.2021.12.2.692.

Full text

Abstract:

The Brazilian energy sector adopted a new regulation system in 2015 due to a system collapse threat. The system was changed to contractually incorporate firms’ economic-financial monitoring. This paper aims to assess the progress of this monitoring model toward achieving its goals. Thus, we proceed with a triangulation with three analyses. First, we analyse the literature to indicate if the economic-financial monitoring shows a hybrid form of adoption as suggested by the literature as the most suitable towards achieving regulatory goals. Second, we verify the perception of the economic-financial monitoring efficiency by the regulatory agency. Third, we evaluate the behaviour of some financial indicators before and after the new regulation. Our results show that, first, the economic-financial monitoring adopts a hybrid form which may drives better monitoring. Second, the perception of the regulator regarding efficiency of the financial monitoring model is favourable. Third, our results show that the sector leverage and profitability variances were significantly reduced after the implementation of financial monitoring which indicates less Asymmetric Information and consequently, better monitoring. In general, our results indicate some uncertainty reduction and more uniform behaviour of the entire sector after adopting an economic-financial monitoring system.

APA, Harvard, Vancouver, ISO, and other styles

2

Garcia, Kathreen Charrise E., and Benilda Eleonor V. Comendador. "Field Service Monitoring System for Electric Distributors’ Third Party Contractors." International Journal of Information and Electronics Engineering 6, no. 3 (2016): 175–79. http://dx.doi.org/10.18178/ijiee.2016.6.3.619.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Todoroki, Akira, Ryosuke Matsuzaki, and Yoshinobu Shimamura. "OS09W0059 Wireless Strain Monitoring of Tires Using Electric Capacitance Changes." Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics 2003.2 (2003): _OS09W0059. http://dx.doi.org/10.1299/jsmeatem.2003.2._os09w0059.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Isdawimah, Isdawimah. "Error Optimization in Electrical Power Quality Monitoring Data." Logic : Jurnal Rancang Bangun dan Teknologi 19, no. 1 (March 30, 2019): 1. http://dx.doi.org/10.31940/logic.v19i1.1214.

Full text

Abstract:

In the application of electrical power quality control, the necessity for data processing becomes very important. The measurement data obtained is the latest data and measured in real time with good time resolution and with low error. The object of research is the quality of electric power, the research is about ways of measuring quality of electrical power to obtain accurate data in accordance with actual conditions. This method is capable of measuring data of electrical power quality that changes very quickly with a low error. This data is used as a basis for improving the quality of electric power accurately and accurately.

APA, Harvard, Vancouver, ISO, and other styles

5

Sousa, Pedro José, Manuel Rodrigues Quintas, and Paulo Abreu. "Modular System for Cold Storage Monitoring." International Journal of Online Engineering (iJOE) 12, no. 04 (April 28, 2016): 46. http://dx.doi.org/10.3991/ijoe.v12i04.5127.

Full text

Abstract:

This work describes the development of an embedded electronic-based monitoring system suitable for cold-storage electrical equipment. The system uses a touchscreen and provides sensors for temperature, relative humidity, electric power consumption and detection of door position. To monitor the electric power, a special purpose current sensor was developed and calibrated. The system adopts a modular architecture using cabled and wireless communications, making it suitable for integration in other logging and alarm generation systems. The system was tested on a home fridge to demonstrate its capabilities.

APA, Harvard, Vancouver, ISO, and other styles

6

Drenker, S., and A. Kader. "Nonintrusive monitoring of electric loads." IEEE Computer Applications in Power 12, no. 4 (1999): 47–51. http://dx.doi.org/10.1109/67.795138.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Kokot, M., and Jan Holnicki-Szulc. "Health Monitoring of Electric Circuits." Key Engineering Materials 293-294 (September 2005): 669–76. http://dx.doi.org/10.4028/www.scientific.net/kem.293-294.669.

Full text

Abstract:

A methodology of defect identification in linear DC circuits based on so called Virtual Distortion Method (VDM) will be presented. The proposed approach takes adventage of the analogy linking mechanical models of truss structures and electric circuits. In this paper we cover the issue of modelling defects in electric circuits by compatible state of distortions, next we introduce the concept of influence matrix Dij, which describes global sensitivity of the circuit and enables fast recalculation of system response, and we formulate a gradient method of defect identification (inverse problem) based on local current and voltage measurements. In the following analysis we focus on so-called impotent states of distortions, which are the source of ambiguity of solution. We show that these difficulties can be overcome by a proper measuring strategy.

APA, Harvard, Vancouver, ISO, and other styles

8

Barkas, Dimitris A., George Ch Ioannidis, Stavros D. Kaminaris, and Constantinos S. Psomopoulos. "Design of a Supraharmonic Monitoring System Based on an FPGA Device." Sensors 22, no. 5 (March 4, 2022): 2027. http://dx.doi.org/10.3390/s22052027.

Full text

Abstract:

During the last few decades, the poor quality of produced electric power is a key factor that has affected the operation of critical electrical infrastructure such as high-voltage equipment. This type of equipment exhibits multiple different failures, which originate from the poor electric power quality. This phenomenon is basically due to the utilization of high-frequency switching devices that operate over modern electrical generation systems, such as PV inverters. The conduction of significant values of electric currents at high frequencies in the range of 2 to 150 kHz can be destructive for electrical and electronic equipment and should be measured. However, the measuring devices that have the ability of analyzing a signal in the frequency domain present the ability of analyzing up to 2.5 kHz–3 kHz, which are frequencies too low in comparison to the high switching frequencies that inverters, for example, work. Electric currents at 16 kHz were successfully measured on an 8 kWp roof PV generator. This paper presents a fast-developed modern measuring system, using a field programmable gate array, aiming to detect electric currents at high frequencies, with a capability for working up to 150 kHz. The system was tested in the laboratory, and the results are satisfactory.

APA, Harvard, Vancouver, ISO, and other styles

9

Wan-Ye, Yao, Sun Teng-Zhong, and Jiang Xue-Li. "The Design and Implement of Electrical Operator Monitoring System." International Journal of Advanced Pervasive and Ubiquitous Computing 5, no. 3 (July 2013): 60–65. http://dx.doi.org/10.4018/ijapuc.2013070106.

Full text

Abstract:

Since the traditional electrical system data monitor equipment has some shortage, such as limited monitoring objects, single monitoring direction, the authors combine computer science Internet technologies with electric power system production process and extend the scope of monitoring system. This paper analyzes the key technology by which the operator monitoring system can be realized, and puts forward the scheme, which based on.NET platform, of recording operator’s behaviors during electric power generation, and it is implemented in WINDOWS system.

APA, Harvard, Vancouver, ISO, and other styles

10

Ding, Zhi Lin, Yu Hong Wang, Da Qiang Qiu, Yan Zhu, Xiao Han Liu, and Ping Xiao. "Selection of Online Electric Quantities for Converter Condition-Based Maintenance." Applied Mechanics and Materials 521 (February 2014): 273–78. http://dx.doi.org/10.4028/www.scientific.net/amm.521.273.

Full text

Abstract:

Converter is the core of a HVDC transmission system. In order to recognize the converter fault, the state of electric parameters is measured by real-time online monitoring method. It has great significance for making condition-based maintenance strategy. In the paper, the basic structure and fault type of the converter are discussed. Based on the ETSDAC of ADPSS simulation package, a HVDC transmission system is established, and the essential characteristics of each electrical quantity in main circuit when fault occurs are analyzed. Under different fault conditions, energy gradient is used to characterize changes of electric parameters. Finally, according to the energy variation, the online monitoring electrical quantities of each fault state are determined. Simulation results show that this method can be used to choose electric quantities for online monitoring.

APA, Harvard, Vancouver, ISO, and other styles

11

Li, Yong, Xiao Dong Ding, and Yu Ting Li. "The Electric Monitoring System Application Based on ZigBee Wireless Technology." Applied Mechanics and Materials 721 (December 2014): 486–89. http://dx.doi.org/10.4028/www.scientific.net/amm.721.486.

Full text

Abstract:

The electrical monitoring is the most important part of industrial production, with industrial production situation of increasingly complex, also more and more high to the requirement of wireless industrial monitoring and control system. In this context strengthen monitoring system based on ZigBee wireless industry research is of great significance. Wireless electric monitoring system based on ZigBee has more advantages compared with traditional wireless monitoring technology. To strengthen the research of this technique is a necessary choice to meet the requirements of the actual industrial production. This article will revolve around ZigBee technology to explore how to enhance the level of electrical control system.

APA, Harvard, Vancouver, ISO, and other styles

12

Hudedmani, Mallikarjun, Nitin Ummannanavar, Sanjay B. Maradi Mani, Dheeraj Mudaliar, and Akshay V. Dhage. "Portable Monitoring Unit for Electric Motor." International Journal of Advanced Science and Engineering 4, no. 4 (May 27, 2018): 768. http://dx.doi.org/10.29294/ijase.4.4.2018.768-775.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Patnayak, S., and D. D. Tannant. "Performance monitoring of electric cable shovels." International Journal of Surface Mining, Reclamation and Environment 19, no. 4 (December 2005): 276–94. http://dx.doi.org/10.1080/13895260500327912.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Hoyle, B. S. "Electric arc weld voltage monitoring system." Journal of Physics E: Scientific Instruments 21, no. 2 (February 1988): 182–87. http://dx.doi.org/10.1088/0022-3735/21/2/011.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Lowes, F. J. "Magnetic monitoring of DC electric railways." Physics in Technology 18, no. 5 (September 1987): 209–11. http://dx.doi.org/10.1088/0305-4624/18/5/i03.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Šarga, Patrik, and Andrej Krempaský. "MONITORING OF THE ELECTRIC MOTOR PARAMETERS." TECHNICAL SCIENCES AND TECHNOLOGIES, no. 2(24) (2021): 188–95. http://dx.doi.org/10.25140/2411-5363-2021-2(24)-188-195.

Full text

Abstract:

The presented paper describes the creation of a monitoring system based on the IoT platform, designed to monitor the parameters of an electric motor. Based on the obtained data, the operator is informed about the current state of the electric motor and can intervene in time so that it is not suddenly damaged or destroyed. In the next phase of the research, a model of predictive maintenance will be processed based on the obtained data. As a result, the operator will not have to estimate the condition of the electric motor, but the system itself will suggest appropriate measures. Such a system will find application in practice, but also in the teaching process, as the preparation of graduates for the modern monitoring systems, which are increasingly used in practice, will be improved. The presented paper is a scientific and methodological publication.

APA, Harvard, Vancouver, ISO, and other styles

17

Ma, Chuan, Diyang Li, and Hongyu Mao. "The Design of Electrical Equipment Overheat Monitoring System on Electric Propulsion Ship Based on WSN." MATEC Web of Conferences 246 (2018): 03029. http://dx.doi.org/10.1051/matecconf/201824603029.

Full text

Abstract:

Wired electric equipment overheating monitoring system has some limitations in electric propulsion ships. This paper designs an electrical equipment overheat monitoring system based on Wireless Sensor Network (WSN) to monitor the overheat of electrical equipment. To verify the performance of the whole system, we design the hardware and the software of sensor nodes and coordinators. In order to extend the lifetime of sensor node effectively, the system adopts the dynamic sleep and controllable transmit power method. The results show that this system achieves the accurate measurement of electrical equipment temperature. At the same time, laboratory data tests shown that it can achieve the same accuracy as wired measurements. This paper provides a new solution for overheating monitoring of marine electrical equipment.

APA, Harvard, Vancouver, ISO, and other styles

18

Luo, Yan Yan, Xiao Jun Zhang, Li Jing Ma, Li Xin Wang, Ke Li, Ming Ming Lei, Fang Yao, Xiao Ning Li, and Yong Long Ren. "Study on Micro-Deformation Monitoring Technology of Contacts for Electric Connectors." Advanced Materials Research 852 (January 2014): 363–67. http://dx.doi.org/10.4028/www.scientific.net/amr.852.363.

Full text

Abstract:

Using optical fiber sensing technology to monitor the micro-deformation of the contacts for electric connectors. In this paper, the test scheme on the micro-deformation of the contacts of electric connectors is established; the micro-deformation test circuit is designed; and micro-deformation detecting test of the contacts for the electrical connectors is conducted under different temperature stresses conditions. Finally, the feature of the deformation affected by high temperature is analyzed.

APA, Harvard, Vancouver, ISO, and other styles

19

Todoroki, Akira, Masahito Ueda, and Yoshinobu Shimamura. "Damage Monitoring of Thick CFRP Beam Using Electrical Impedance Changes." Key Engineering Materials 353-358 (September 2007): 1298–301. http://dx.doi.org/10.4028/www.scientific.net/kem.353-358.1298.

Full text

Abstract:

Electrical resistance change method has been applied to monitor a delamination crack of a thin CFRP laminate. For a thick CFRP laminate, multiple delamination cracks are made with many matrix cracks, and the electric current in the thick CFRP laminate may not flow in the thickness direction due to the strong orthotropic electrical conductivity. The present study employs an electric impedance change method for the identification of damage location and dimension of the damaged area; applicability of the method is investigated experimentally using thick beam-type specimens fabricated from cross-ply laminates of 36 plies. After making the damage, electrical impedance was decreased. A residual stress relief model was proposed to explain the decrease. From the measured electrical impedance changes, the relationships between the electrical impedance changes and damages are obtained by means of response surfaces. The response surfaces estimated the damage location and dimension of the damaged area exactly even for the thick CFRP laminates. The electrical impedance change method can be used as an appropriate sensor for measurement of residual stress relief due to damages of thick CFRP laminates.

APA, Harvard, Vancouver, ISO, and other styles

20

Pratama, Jusuf Abimas, Miftahul Anwar, Sifaus Wulaning Arsri, Ferdiansyah Ashil Farisi, and Muhammad Nizam. "REGENERATIVE BRAKING MONITORING SYSTEM OF ELECTRIC VEHICLE." Journal of Electrical, Electronic, Information, and Communication Technology 1, no. 1 (October 7, 2019): 1. http://dx.doi.org/10.20961/jeeict.v1i1.34474.

Full text

Abstract:

<strong>Electric vehicles is in rapid development. The energy commonly used as a driving force for electric vehicles comes from batteries. The development of electric vehicle technology is currently concentrated on efforts to charge the battery used by utilizing the power wasted when braking electrically. The gearbox and final drive are installed as a mechanical transmission system for electric vehicles to increase the torque of the BLDC motor as the main driving force of the vehicle. The regenerative process occurs when the Kelly-KBL motor controller electric braking feature is activated. For this reason, Arduino Mega and LabVIEW software are used to observe the current and voltage of lead acid batteries with voltage 48 V and capacity 225 Ah (C20). In addition, a 2 kW BLDC motor RPM was also observed in the electric braking monitoring system. From the results of monitoring and data collection, the vehicle traveled a distance of 36.06 m in 68 s time intervals with an average speed of 16.8 m / s. The average torque value when electric braking on a BLDC motor supplies 154 Nm, while the average torque of the vehicle is 996.99 Nm. The average regenerative power of the wheels is 17.07 kW, while the average mechanical power of the wheels is 13.67 kW. Coulometric state of charge (SOC) shows an increase in battery capacity of 4.27% and 99.97% voltage SOC at the beginning of the activation of the electric brake pedal. Maximum battery power movement when charging, 2.25 kW is caused by the activation of the electric brake pedal. Whereas when using a maximum of 1.52 kW. The application of electric braking has a power consumption efficiency of 0.042%. and charging power charging 18.97%.</strong>

APA, Harvard, Vancouver, ISO, and other styles

21

Mata, Oscar Núñez, Gerard Rodríguez Vargas, and Rolando Rolando Oviedo. "Monitoreo de Descargas Parciales En-línea en Generadores Eléctricos de Alta Tensión." KnE Engineering 3, no. 1 (February 11, 2018): 645. http://dx.doi.org/10.18502/keg.v3i1.1468.

Full text

Abstract:

Rotating electric machines with operating voltage greater than 12 [kV] are an integral part of the installed base of electric generators in different countries. These voltages incorporate new challenges to be solved in maintenance practices. One of the most important challenges is the identification of the condition of the stator winding. For many years, the most commonly used monitoring techniques in electrical generators were off-line insulation measurements, especially in direct current. More recently, the use of on-line insulation monitoring techniques has enabled problems to be detected in advance, such as partial discharge measurement. This article presents the measurement of on-line partial discharges, as a condition monitoring technique for high voltage electric generators. It is also used for risk assessment and decision support for corrective actions. In the case study, it was evidenced that periodic monitoring is key during the operating time of the evaluated generator unit, which can be extended to other generators. The monitoring of on-line partial discharges allowed to know its condition and evolution through the trend in time.Keywords: Partial discharge, electric generator, failure mode, predictive maintenance, void.

APA, Harvard, Vancouver, ISO, and other styles

22

Salisu, Abubakar, Aminu Bugaje, and A. Z. Loko. "IOT BASED HOUSEHOLD ELECTRICITY ENERGY MONITORING AND CONTROL." FUDMA JOURNAL OF SCIENCES 4, no. 4 (June 12, 2021): 77–84. http://dx.doi.org/10.33003/fjs-2020-0404-466.

Full text

Abstract:

Internet of Things (loT) has opened up a myriad of applications in many areas, including medical and healthcare networks, smart home control, and environmental surveillance. IoT is supposed to bring about a large amount of progress in the ubiquitous computing sector. IoT-based energy management programs may allow a significant contribution to energy conservation. Therefore, this paper focuses on the design and implementation of an IoT based household electricity energy monitoring and electric bulb remote control for the reduction of electrical wastage using ESP 32-bit microcontroller. The ESP 32 microcontroller was used as the brain of the entire system which processes the energy consumption, temperature reading. Temperature monitoring can assist tremendously in the explosion and burning incidence avoidance, thereby saving lives and properties. The ESP32 microcontroller also handles the internet connectivity via its inbuilt WIFI module in order to transmit the real-time energy consumption, temperature reading, and electric bulb remote control over the internet. A MATLAB app was designed to serve as user interface for monitoring the household electricity energy consumption, temperature reading and electric bulb remote control via Thingspeak cloud server from MathWorks (makers of MATLAB) and also monitors the temperature and electricity consumed by the pressing iron and the hair dryer. Whenever, the electricity consumption or temperature reading exceeds the set threshold on the MATLAB app, a notification is sent to the user’s Email. The system could be used for reducing the wastage of electrical energy in the house by proper scheduling and monitoring of the appliances

APA, Harvard, Vancouver, ISO, and other styles

23

Korolev, Nikolay, and Sergey Solovev. "Monitoring the technical condition of autonomous electrical systems with electric drive." E3S Web of Conferences 140 (2019): 04015. http://dx.doi.org/10.1051/e3sconf/201914004015.

Full text

Abstract:

The article discusses the structure of autonomous electrical systems with an electric drive and an electric energy generation system. An approach is described for assessing the overall efficiency of technological cycle equipment with specification of parameters that must be considered when calculating it. The necessity of taking into account energy efficiency and operability indicators of autonomous electric complexes is substantiated. The effectiveness of the use of autonomous systems decreases throughout the entire life cycle due to wear and tear. As the operability of electromechanical equipment, an indicator of the residual resource is selected. The calculation of the residual resource, with the definition of its boundary values and recommendations for further use. Nominal energy efficiency parameters of autonomous electrotechnical complexes with electric drive deteriorate during operation, which also needs to be taken into account. To simplify the assessment of the operational state of electromechanical equipment, a state diagram is presented that allows you to track the dynamics of degradation of individual nodes. Taking into account the described indicators and means of control, it is possible to increase the efficiency of using autonomous complexes.

APA, Harvard, Vancouver, ISO, and other styles

24

Tang, Li Hua, and Tie Jun Gao. "Study on Operation Monitoring System Used by Battery Electric Vehicle." Applied Mechanics and Materials 148-149 (December 2011): 697–702. http://dx.doi.org/10.4028/www.scientific.net/amm.148-149.697.

Full text

Abstract:

According to the management need of Battery Electric Vehicle, compose built to be based on GPS+GPRS Battery Electric Vehicle intelligent monitoring system. The system includes communication module, GPS+GPRS intelligent monitoring system software and monitoring vehicle. Based on the operation characteristics of pure electric vehicles and electric vehicle battery in performance analysis, put forward the pure electric bus operation monitoring system design, and through the Web Service technology combined with VB.NET, MapInfo, Mapx and Iocomp controls with GIS technology to achieve the monitoring software interface design, and the collection of data for real-time monitoring, for the development of Battery Electric Vehicle operation system to provide strong technical support.

APA, Harvard, Vancouver, ISO, and other styles

25

Sridharan. P, Sridharan P. "Vibration Control and Condition Monitoring of Turbine Alternator in Hydro Electric Power Plants." International Journal of Scientific Research 2, no. 5 (June 1, 2012): 157–60. http://dx.doi.org/10.15373/22778179/may2013/54.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Y., Paramud, Rak T., and Torskyi M. "PRINCIPLES OF MONITORING AND CONTROL OF THE CHARGING STATIONS NETWORK FOR ELECTRIC VEHICLES." Computer systems and network 2, no. 1 (March 23, 2017): 59–67. http://dx.doi.org/10.23939/csn2020.01.059.

Full text

Abstract:

This paper explores the principles of construction, monitoring, management, and safety organization in the network of charging stations for electric vehicles. The use of elements of modern client-server technologies and elements of cyber-physical systems in such networks is offered. The basic structure of the cyber-physical control system of the charging station network has been developed. Network server and client tools have been researched and developed. Structural and functional server solutions and client parts are submitted. An analysis of the potential cyberattacks vulnerability of the network. Suggestеtion to use effective methods of protection against cyberattacks. Keywords: monitoring, control, network, charging station, server, cybersecurity.

APA, Harvard, Vancouver, ISO, and other styles

27

Yin, Qian Xi, Lu Yan Fan, Da Wei Qu, and Ye Tian. "Remote Monitoring System Development for Electric Vehicles." Advanced Materials Research 724-725 (August 2013): 1431–35. http://dx.doi.org/10.4028/www.scientific.net/amr.724-725.1431.

Full text

Abstract:

Utilizing Socket Send () function to package the required CCP commands.Vehicle information terminal restore the data into CAN frames and achieve the purpose of remote calibration by parsing Socket nested word.Introduced the development of host computer for electric vehicles’ RMON .Including hardware configuration and development of the Information Center,the analysis of calibration database and the design of software for vehicles’ monitoring and calibration.Clarify the calibration process and fault diagnosis technology.

APA, Harvard, Vancouver, ISO, and other styles

28

P, Kalpana, and Manju B. "Smart Monitoring of Electric Meters using IoT." IJARCCE 8, no. 2 (February 28, 2019): 59–63. http://dx.doi.org/10.17148/ijarcce.2019.8210.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

NAKANO, Yukio. "Non－Intrusive Electric Appliances Load Monitoring System." Journal of Japan Society for Fuzzy Theory and Intelligent Informatics 23, no. 6 (2011): 807–12. http://dx.doi.org/10.3156/jsoft.23.6_807.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Yousef Ben Sasi, Ahmed, Fengshou Gu, Bradley Payne, and Andrew Ball. "Instantaneous angular speed monitoring of electric motors." Journal of Quality in Maintenance Engineering 10, no. 2 (June 2004): 123–35. http://dx.doi.org/10.1108/13552510410539196.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Kendall, J. "Battery monitoring system for an electric vehicle." Journal of Power Sources 70, no. 1 (January 30, 1998): 161. http://dx.doi.org/10.1016/s0378-7753(97)84103-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Reitzes, James D., Robert L. Earle, and Philip Q Hanser. "Deregulation and Monitoring of Electric Power Markets." Electricity Journal 13, no. 8 (October 2000): 11–25. http://dx.doi.org/10.1016/s1040-6190(00)00142-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Rus, C., R. Marcus, L. Pellegrini, M. Leba, M. Rebrisoreanu, and A. Constandoiu. "Electric cars as environmental monitoring IoT Network." IOP Conference Series: Materials Science and Engineering 572 (August 2, 2019): 012091. http://dx.doi.org/10.1088/1757-899x/572/1/012091.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Versek, C., T. Frasca, J. Zhou, K. Chowdhury, and S. Sridhar. "Electric field encephalography for brain activity monitoring." Journal of Neural Engineering 15, no. 4 (June 13, 2018): 046027. http://dx.doi.org/10.1088/1741-2552/aac3f9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Starr, Andrew. "Aircraft health monitoring - towards more electric aircraft." Impact 2018, no. 5 (August 20, 2018): 48–50. http://dx.doi.org/10.21820/23987073.2018.5.48.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Oyebande, B. O., and A. C. Renfrew. "Condition monitoring of railway electric point machines." IEE Proceedings - Electric Power Applications 149, no. 6 (2002): 465. http://dx.doi.org/10.1049/ip-epa:20020499.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Noras, Maciej A., and William A. Maryniak. "Monitoring of electric potential of semiconductor wafer." physica status solidi (c) 5, no. 4 (April 2008): 935–38. http://dx.doi.org/10.1002/pssc.200778331.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Miftachul Ulum, Mutiara Hikmah, Achmad Fiqhi Ibaidillah, and Kunto Aji Wibisono. "Rancang Bangun Sepeda Listrik 250 Watt Dengan Mengukur Kecepatan Dan Daya Baterai." Jurnal JEETech 2, no. 1 (May 27, 2021): 7–12. http://dx.doi.org/10.48056/jeetech.v2i1.150.

Full text

Abstract:

Electric bicycles are one of many vehicles with alternative fuels. This electric bike uses electric power as its power source. Whose electrical energy is converted into motion energy. To convert that electrical energy into motion energy is needed which is called an electric dynamo. The electric dynamo here becomes an engine core on an electric bike. The performance of electric bicycles is measured based on high power efficiency, low energy consumption levels and stable electric bicycle components in their use. To monitor the performance, a speed and battery power scrolling system was designed on a 250W electric bike. An electric motorcycle is a type of vehicle consisting of brushless direct current (BLDC) to move the wheel, controller as energy flow regulator on BLDC, and battery as a power source. The main parts of this monitoring system include two 12 volt batteries in the series, controller, BLDC, throttle, proximity sensor, liquid crystal display (LCD). Throttle works as a BLDC speed controller. DC power meter as a measuring detector for the amount of electric current, electrical voltage, electrical energy, and electrical power displayed on the LCD.

APA, Harvard, Vancouver, ISO, and other styles

39

Su, Qiang, Peng Xu, and Wei Xiong. "Application in Aerospace Experiment Field for Intelligent Power Supply and Distribution Monitoring System." Advanced Materials Research 516-517 (May 2012): 1322–25. http://dx.doi.org/10.4028/www.scientific.net/amr.516-517.1322.

Full text

Abstract:

According to applying feature of power supply and distribution system in aerospace experiment field, the intelligent monitoring system is designed by adopting hierarchical distributed network structure which includes field layer, network layer, management layer, and command center layer. The monitoring software based on configuration software realized such functions as unify electric force management, optimize electric force balance, economize electrical energy loss, extend lifetime of equipments, improve qualities of environment protection, promote efficiency and managing level. Applying result indicates: the system satisfies the requirement of aero experimenting task.

APA, Harvard, Vancouver, ISO, and other styles

40

Sternad, M., M. Cifrain, D. Watzenig, G. Brasseur, and M. Winter. "Condition monitoring of Lithium-Ion Batteries for electric and hybrid electric vehicles." e & i Elektrotechnik und Informationstechnik 126, no. 5 (May 2009): 186–93. http://dx.doi.org/10.1007/s00502-009-0644-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Kochetkov, A. I. "Monitoring and Recording of Electric Power via the Electric Power Supply Networks." Measurement Techniques 47, no. 7 (July 2004): 678–81. http://dx.doi.org/10.1023/b:mete.0000043656.75959.26.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Zheng, Xiao Xia, Cong Jie Ye, Yang Fu, and Dong Dong Li. "Predictive Condition Monitoring and Fault Diagnosis Techniques for Offshore Wind Turbines." Advanced Materials Research 608-609 (December 2012): 638–43. http://dx.doi.org/10.4028/www.scientific.net/amr.608-609.638.

Full text

Abstract:

Wind energy conversion is the fastest-growing source of new electric generation in the world. The unforeseen damages of a component in a wind turbine have significant impact on the wind turbines, especially offshore ones. There has been a trend towards adoption of various forms of condition monitoring and fault diagnosis to know the deteriorating condition for both mechanical and electrial components, well in advance of a breakdown. This paper review the most recent advances in these areas with a special focus on offshore wind turbines. Different type of faults on offshore wind turbines are reviewed, including gearbox and bearing failures, generators failures, rotor failures and electrical failures. And then two widely-used methods(vibration analysis and oil monitoring) for predictive condition monitoring and fault diagnosis in offshore wind turbines are reviewed.

APA, Harvard, Vancouver, ISO, and other styles

43

Bukreev, Aleksey V. "Device for Remote and Mobile Monitoring of Electrical Grids of Agricultural Facilities." Elektrotekhnologii i elektrooborudovanie v APK 48, no. 4 (December 2021): 23–28. http://dx.doi.org/10.22314/2658-4859-2021-68-4-23-28.

Full text

Abstract:

The main methods that are used in the process of energy inspection of agricultural facilities include instrumental inspection of both the electrical grid of the enterprise as a whole and individual technological processes, electrical devices and electrical equipment. The instrumental survey allows you to get diagrams of the electrical load, record the consumption of electrical energy and investigate the main parameters of the electric grid on the enterprise at its different points. It is desirable to carry out such measurements without disconnecting the electrical devices, as this can lead to losses for the enterprise. The available instruments and complexes do not allow remote monitoring of the operating parameters of the electrical grid, are not adapted for long-term measurements in the conditions of agricultural facilities. Permanently installed metering devices, monitoring devices do not provide the necessary mobility during the energy audit. It is required to develop devices for remote and mobile measurement of operating parameters electrical grid of agricultural facilities. (Research purpose) The research purpose is in developing a device for remote and mobile measurement of operating parameters of electric grid of agricultural facilities. (Materials and methods) The article presents the analysis of literature sources, the analysis of existing means for measuring electrical energy parameters. (Results and discussion) The existing methods and technical means that allow for the study of the parameters of the operating modes of electric networks are not adapted to long-term measurements in the conditions of agricultural facilities, since they have low protection from the environment and a high cost. The article presents the developed device schematics and an experimental sample. Its tests were conducted verifying the accuracy of measurements and the correctness of the specified functions. (Conclusions) A device has been developed for remote and mobile measurement of operating parameters of electrical grid of agricultural facilities. Based on the test results, the operability of the developed device was confirmed.

APA, Harvard, Vancouver, ISO, and other styles

44

Vasenin, A. B., S. E. Stepanov, and O. V. Kryukov. "METHODOLOGY AND MEANS OF OPERATIONAL MONITORING OF ELECTRIC MOTORS AT COMPRESSOR STATIONS." Kontrol'. Diagnostika, no. 257 (2019): 52–58. http://dx.doi.org/10.14489/td.2019.11.pp.052-058.

Full text

Abstract:

The present technical condition of the fleet of electric motors serving the actuators of the infrastructure facilities of the fuel and energy complex is presented. The statistics of damage and damage from abnormal operation of electric drive units operating on mechanisms with a fan and pump load are given. The analysis of the causes of the increase in the range of vibration displacement, which leads to premature failure of electric motors, is given. A method for reliably determining the causes of damage, based on measuring and analyzing the electrical parameters of the harmonic spectrum of the motor current, is proposed. Its essence consists in creation of the universal diagnostic system working at the physical principle at which any indignations in work of an electric and mechanical part of the engine and related actuator lead to modulation of the consumed current. Existence in a range of current of characteristic frequencies of a certain size demonstrates existence of these or those damages. The device for its implementation includes phase current sensors of the supply voltage, a signal conditioner for normalizing and filtering signals, an analog-to-digital converter with a USB interface, and a controller with software for analyzing, evaluating, and diagnosing the condition. Experimental results have been obtained confirming the adequacy of the methodology and technical means for monitoring electric motors of various mechanisms.

APA, Harvard, Vancouver, ISO, and other styles

45

Berardone, Irene, and Marco Paggi. "Nondestructive monitoring of damage caused by accelerated ageing in photovoltaic modules." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233, no. 23-24 (November 28, 2019): 7565–72. http://dx.doi.org/10.1177/0954406219889382.

Full text

Abstract:

Accelerated ageing tests of photovoltaic laminates are requested by the IEC standards for quality control, which require the assessment of the electrical power losses after a prescribed amount of temperature and/or humidity cycles inside a climatic chamber (thermal cycling, humidity freeze, and damp heat tests). Since electric damage is measured only at the end of such tests, its kinetics induced by thermo-elastic stresses and the related degradation phenomena are reported in few cases. The aim of this study is to investigate the progress of damage, reporting the results of an unprecedented experimental campaign on a photovoltaic mini-module composed of nine multi-crystalline silicon solar cells, one of them containing a cracked cell, subject to a revised thermal cycling test including moisture. Every 40 cycles, and up to 460 (corresponding to 1840 h of testing), the progress of electric damage is assessed by monitoring the evolution of the overall electric resistance of the module. Moreover, electroluminescence images are taken with the same time interval, to assess local damage phenomena responsible for electric power-losses. Cracks are found to significantly accelerate the progress of damage as compared to what happens in intact solar cells, inducing progressive gridline failure and the spread of electrically inactive zones.

APA, Harvard, Vancouver, ISO, and other styles

46

Ibnu Hajar, Muhammad Hafizd, Akhmad Wahyu Dani, and Satriyo Miharno. "MONITORING OF ELECTRICAL SYSTEM USING INTERNET OF THINGS WITH SMART CURRENT ELECTRIC SENSORS." SINERGI 22, no. 3 (October 29, 2018): 211. http://dx.doi.org/10.22441/sinergi.2018.3.010.

Full text

Abstract:

Electricity is one of the most important human needs. In the presence of electricity it can facilitate human work. But it should be noted that too large and uncontrolled electricity use will be wasteful and get high costs. The problem is that electricity is not monitored accurately, easily and efficiently. This study aims to design an electric current monitoring device with an IoT system. IoT is a concept with the ability to transfer data by network, no need humans to humans or humans to PCs. In this concept, the SCT 013-000 electric current sensor is connected to the load, it will be show electric current value in the LCD, if the electric current which is determined exceeds the capacity, Wemos D1 including Wifi ESP 8266 will be sending a notification to the telegram. The system has been implemented with ironing load for 3.29%, the dispenser load is 0.20% and Magicom's get load for 1.07%. The delay time also has been implemented in the relay for 1.50 second when relay is on and 0.78 second when relay is off. When the notification send to the telegram also have a delay for 6.2 second. So, monitoring of electrical system using internet of things with smart current electric sensors has been done.

APA, Harvard, Vancouver, ISO, and other styles

47

Zeng, Siming, Jingran Jia, Tianxiang Ma, Boyan Jia, and Xin Duan. "Application of AI Image Recognition in the Omnidirectional Monitoring System for Power Transmission Lines." Advances in Multimedia 2021 (November 30, 2021): 1–7. http://dx.doi.org/10.1155/2021/3073248.

Full text

Abstract:

With the continuous advancement of social economy, electric power, as an essential resource, plays an important supporting role for the development of industry and the lives of residents. As electric power itself is dangerous to a certain level, it is crucial to use the electric power rationally and ensure the safe application of electrical equipment. In this paper, AI image recognition technology is introduced to establish a comprehensive monitoring system for power transmission lines. Through the control of the potential risks of the transmission lines, emergency treatment of power transmission lines is implemented, which has provided an application support for the safe use of power equipment. Simulation experiments have verified that the image recognition technology based on AI can support omnidirectional monitoring of power transmission lines effectively.

APA, Harvard, Vancouver, ISO, and other styles

48

Chai, Da Peng, Qiang Qiang Xue, Ling Mei Wang, and Xing Yong Zhao. "Research of Intelligent Substation Condition Monitoring Based on the Neural Network." Applied Mechanics and Materials 325-326 (June 2013): 692–96. http://dx.doi.org/10.4028/www.scientific.net/amm.325-326.692.

Full text

Abstract:

The substation electric power equipment condition monitoring is the basis of intelligent substation. This paper analyzes the composition of the substation electric power equipment condition monitoring system and monitoring parameters, and with the transformer condition monitoring as an example, this paper proposes fault diagnosis methods of electric power equipment using artificial neural network(ANN).

APA, Harvard, Vancouver, ISO, and other styles

49

Yang, Hong Lei, Shi Bin Liang, Xue Peng Miao, Min Cao, and Ming Chang. "Research and Application of Optical Fiber Sensing Technology on High Voltage Transmission Line Monitoring." Applied Mechanics and Materials 462-463 (November 2013): 59–63. http://dx.doi.org/10.4028/www.scientific.net/amm.462-463.59.

Full text

Abstract:

On-line monitoring of high voltage transmission lines can prevent or reduce the accidents of transmission reduced by icing,wave,breeze vibrations of electric wires and the dropping of electrical insulators.An on-line monitoring system of high voltage transmission lines based on optical fiber sensing technology is setted in this paper.Fiber optic signal demodulation instrument in the transformer substation receives the signal sent by the optical fiber Bragg grating sensors fitted on transmission lines and electric power towers,and then the signal was sent to the transmission line monitoring center by the power system network.Field hang net experiments shows that the system can monitor the high voltage transmission lines accurately for a long time.

APA, Harvard, Vancouver, ISO, and other styles

50

Phaiboon, Supachai, and Sastra Thanrattanukool. "An Empirically Based Model for Electric Generation of Bicycle." Applied Mechanics and Materials 701-702 (December 2014): 1210–13. http://dx.doi.org/10.4028/www.scientific.net/amm.701-702.1210.

Full text

Abstract:

This paper presents an experimental study of an electric bicycle. We operated the bicycle on flat roads, uphill and downhill. The speed was categorized into slow, normal, and fast. Electrical loads were varied, step by step, for example 180, 240, 300, and 360 W. According to the observations of electrical power produced by an electric bicycle, we found that at the load of 240 W, it can produce a maximum power of 91.56 W. However, the generator can produce a maximum power of 350 W; therefore, we used a load of 360 W for studying and modeling. Finally, this model can be used to predict the electrical generation from electric bicycles as well as used for meter monitoring.

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!