Academic literature on the topic 'Elastomers Deterioration'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Elastomers Deterioration.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Elastomers Deterioration"
Gotoh, Hiroaki, Chang Liu, Abu Bin Imran, Mitsuo Hara, Takahiro Seki, Koichi Mayumi, Kohzo Ito, and Yukikazu Takeoka. "Optically transparent, high-toughness elastomer using a polyrotaxane cross-linker as a molecular pulley." Science Advances 4, no. 10 (October 2018): eaat7629. http://dx.doi.org/10.1126/sciadv.aat7629.
Full textFurukawa, M., and K. Wakiyama. "Deterioration of novel polyesterurethane elastomers in outdoor exposure." Polymer Degradation and Stability 65, no. 1 (July 1999): 15–24. http://dx.doi.org/10.1016/s0141-3910(98)00209-2.
Full textChoi, I. S., C. M. Roland, and L. C. Bissonnette. "An Elastomeric Ejection System." Rubber Chemistry and Technology 67, no. 5 (November 1, 1994): 892–903. http://dx.doi.org/10.5254/1.3538720.
Full textToczek, Klaudia, Magdalena Lipińska, and Joanna Pietrasik. "Smart TPE Materials Based on Recycled Rubber Shred." Materials 14, no. 21 (October 20, 2021): 6237. http://dx.doi.org/10.3390/ma14216237.
Full textGunatillake, Pathiraja A., Darren J. Martin, Gordon F. Meijs, Simon J. McCarthy, and Raju Adhikari. "Designing Biostable Polyurethane Elastomers for Biomedical Implants." Australian Journal of Chemistry 56, no. 6 (2003): 545. http://dx.doi.org/10.1071/ch02168.
Full textSenichev, V. Yu, and E. V. Pogorel’tsev. "Abrasive resistance of polyetherurethane ureas." Journal of Physics: Conference Series 2094, no. 4 (November 1, 2021): 042077. http://dx.doi.org/10.1088/1742-6596/2094/4/042077.
Full textDiekmann, Astrid, Marvin Christopher Vincenzo Omelan, Ulrich Giese, and Viktor Rose. "CARBON NANOHORN–BASED NBR HYBRID NANOCOMPOSITES." Rubber Chemistry and Technology 93, no. 4 (October 1, 2020): 615–32. http://dx.doi.org/10.5254/rct.20.79958.
Full textHu, Hang, Dongsheng Li, and Weijun Zhu. "Piezoelectric composites from sandwiched polydimethylsiloxane sponges." Journal of Applied Physics 132, no. 18 (November 14, 2022): 184901. http://dx.doi.org/10.1063/5.0111435.
Full textHuang, Xiaoyu, Jinghui Zhao, Yichun Wang, Yuchao Ke, and Zixi Wang. "Study on a New Static Sealing Method and Sealing Performance Evaluation Model for PEMFC." World Electric Vehicle Journal 12, no. 4 (November 11, 2021): 237. http://dx.doi.org/10.3390/wevj12040237.
Full textLattimer, Robert P., Robert A. Kinsey, Robert W. Layer, and C. K. Rhee. "The Mechanism of Phenolic Resin Vulcanization of Unsaturated Elastomers." Rubber Chemistry and Technology 62, no. 1 (March 1, 1989): 107–23. http://dx.doi.org/10.5254/1.3536228.
Full textDissertations / Theses on the topic "Elastomers Deterioration"
Noronha, Fabio. "Desenvolvimento de requisitos de desempenho para elastomeros de isoladores da rede de energia eletrica." [s.n.], 2010. http://repositorio.unicamp.br/jspui/handle/REPOSIP/267098.
Full textDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Quimica
Made available in DSpace on 2018-08-15T13:39:32Z (GMT). No. of bitstreams: 1 Noronha_Fabio_M.pdf: 6615415 bytes, checksum: f72688fb0000126501c64a7267950cb0 (MD5) Previous issue date: 2010
Resumo: Atualmente, os materiais utilizados como isoladores elétricos vêm sendo substituídos por materiais poliméricos por apresentarem vantagens em relação aos isoladores cerâmicos. Dentre estas vantagens, podem-se citar maior desempenho, melhor resistência ao vandalismo e menor peso. O objetivo desta dissertação foi o estabelecimento de desenvolver requisitos de desempenho para os Isoladores Poliméricos (EPDM- Monômero Dieno/Etileno/Propileno e Silicone) usados na rede elétrica, através de resultados obtidos em ensaios de envelhecimento natural e artificial, tendo como enfoque as linhas de transmissão de 69 kV e 138 kV. Foi realizado um estudo do estado da arte em Isoladores Poliméricos e do estado atual de aplicação e desempenho dos mesmos em campo. Estudos experimentais foram desenvolvidos em produtos retirados de campo e produtos novos, envelhecidos artificialmente em laboratório, segundo metodologias aplicáveis a polímeros. Em paralelo foram estudadas mantas elastoméricas de Silicone e EPDM para elaboração de critérios comparativos. Através dos resultados obtidos, foram sugeridos alguns requisitos de desempenho que poderão ser utilizados em especificações dos mesmos. Nesta dissertação, são apresentados, principalmente, estes resultados obtidos por meio das técnicas de ensaio de Tensões Elétricas, Rugosidade, Densidade, Dureza, FTIR-Infravermelho com Transformada de Fourier, DSC-Calorimetria Exploratória, DMTA-Análise Térmica Dinâmico Mecânica e Resistência à Tração. Os resultados obtidos mostraram a importância de controle da rugosidade bem como da necessidade de aditivação do polímero com sistema de termo e foto estabilização
Abstract: Currently, the materials used as electrical insulators are being replaced by polymeric materials have advantages as compared to ceramic insulators. Among these advantages, we can cite higher performance, better resistance to vandalism and lower weight. The objective of this thesis was the establishment of developing performance requirements for Polymeric Insulators (EPDM monomer diene / ethylene / propylene and Silicone) used in power systems, through results from trials of natural and artificial aging, focusing on the lines transmission of 69 kV and 138 kV. We conducted a study of the state of the art in Polymeric Insulators and current state of implementation and performance of the same field. Experimental studies have been developed into products removed from the field and new, artificially aged in the laboratory, according to the methods applied to polymers. Were studied in parallel webs of silicone elastomer and EPDM for developing benchmarks. Through the results, suggested some performance requirements that could be used in the same specifications. In this thesis, are presented, mainly, these results obtained by the techniques of test voltages, roughness, density, hardness, FTIR-Fourier Transform Infrared, Scanning Calorimetry-DSC, DMTA Dynamic-Mechanical Thermal Analysis and Tensile Strength . The results showed the importance of controlling the roughness and the need for additives with the polymer system and picture stabilization term
Mestrado
Ciencia e Tecnologia de Materiais
Mestre em Engenharia Química
Books on the topic "Elastomers Deterioration"
H, Yasuda, and American Chemical Society Meeting, eds. Plasma polymerization and plasma interactions with polymeric materials: Proceedings of the Symposium on Plasma Polymerization and Plasma Interactions with Polymeric Materials, held at the ACS 199th National Meeting in Boston, Massachusetts, April 1990. New York, NY: Wiley, 1990.
Find full textWright, David. Failure of Plastics and Rubber Products: Causes, Effects and Case Studies Involving Degradation. Rapra Technology, 2001.
Find full textWeathering of Plastics: Testing to Mirror Real Life Performance (Plastics & Elastomers). Plastics Design Library, 2000.
Find full textMcKeen, Laurence W. Effect of UV Light and Weather on Plastics and Elastomers. Elsevier Science & Technology Books, 2019.
Find full textMcKeen, Laurence W. Effect of UV Light and Weather on Plastics and Elastomers. Elsevier Science & Technology Books, 2013.
Find full textMcKeen, Laurence W. Effect of UV Light and Weather on Plastics and Elastomers. Elsevier Science & Technology Books, 2019.
Find full textMcKeen, Laurence W. The Effect of UV Light and Weather on Plastics and Elastomers. William Andrew, 2013.
Find full textScheirs, John. Compositional and Failure Analysis of Polymers: A Practical Approach. John Wiley & Sons, 2000.
Find full textCompositional and Failure Analysis of Polymers: A Practical Approach. Wiley, 2000.
Find full textLibrary, Plastics Design, ed. The effect of UV light and weather on plastics and elastomers. Morris, NY: Plastics Design Library, 1994.
Find full textConference papers on the topic "Elastomers Deterioration"
Qamar, S. Z., T. Pervez, M. van de Velden, and F. J. Sanchez. "Design and Fabrication of Test Facility for Longevity Testing of Elastomer Seals." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-93145.
Full textAkhtar, Maaz, Sayyad Zahid Qamar, Tasneem Pervez, and Farooq Khalfan Al-Jahwari. "FEM Simulation of Swelling Elastomer Seals in Downhole Applications." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-64312.
Full textNakano, Mitsuyuki, Haruko Sasaki, and Harumi Ono. "Radiation Resistance of Rubber Compound for Gasket." In ASME 2011 Small Modular Reactors Symposium. ASMEDC, 2011. http://dx.doi.org/10.1115/smr2011-6567.
Full textIshihana, Kenta, Osamu Furuya, Kengo Goda, and Shohei Omata. "Study on Laminated Type Base Isolation Device Using Urethane Erastomer for Practical Application." In ASME 2015 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/pvp2015-45426.
Full textGoda, Kengo, Osamu Furuya, Kohei Imamura, and Kenta Ishihana. "Laminated Type Isolation Device for Light Weight Structure Using Urethane Elastomer." In ASME 2017 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/pvp2017-66167.
Full textIshihana, Kenta, Osamu Furuya, Kengo Goda, and Shohei Omata. "Study on Small-Scale Laminated Type Base Isolation Device Using Urethane Elastomer for Practical Application." In ASME 2016 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/pvp2016-63992.
Full textAnderson, Walter, The Nguyen, and Mohammad Elahinia. "Vibration Mitigation With a Multi-Axial Magnetorheological Mount." In ASME 2009 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. ASMEDC, 2009. http://dx.doi.org/10.1115/smasis2009-1353.
Full textGupta, Sujasha, Srivatsava Krishnan, and Vishnubaba Sundaresan. "Structural Health Monitoring of Composite Structures via Machine Learning of Mechanoluminescence." In ASME 2019 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/smasis2019-5697.
Full text