Relevant bibliographies by topics / DSMI

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'DSMI'

Author: Grafiati
Published: 9 January 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'DSMI.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "DSMI"

1

ASSEGAFF, Syafiq B., Alo LILIWERI, and Alexander SERAN. "The Importance of Persuasion Strategies in Doctors’ Social Media Messages." International Journal of Environmental, Sustainability, and Social Science 4, no. 6 (November 30, 2023): 1835–46. http://dx.doi.org/10.38142/ijesss.v4i6.914.

Full text
Abstract:
This study investigates how doctors employ persuasion strategies (Ethos, logos, and pathos) on Instagram to influence the health behaviors of their followers during the COVID-19 pandemic. Analyzing three influential doctors on social media (DSMIs), the research applies Aristotle's persuasive strategies to understand how these doctors craft messages that drive behavior change and enhance COVID-19 awareness among their 581 followers. Employing a mixed methods approach within the pragmatism paradigm, the study utilizes interviews, literature reviews, content analysis, and surveys for comprehensive data collection. The study reveals that approximately 41% of followers demonstrated a firm intention, with an additional 43% showing a solid intention to change their attitudes and behaviors. About 84% expressed a strong commitment to adopting a healthier lifestyle. The research also identified followers who initially had doubts or confusion about COVID-19 due to misinformation. However, it became convinced of its existence after following the DSMIs' posts, mainly through engaging video content. Engagement is more significant for video content than photos, with pathos, Ethos, and logos effectively fostering engagement. Around 52,438 (314,000) DSMI followers shifted from initial skepticism to meaningful positive attitude transformations, driven by successful engagement through pathos, Ethos, and logos. The study underscores the significance of delivering persuasive and appealing messages to influence behaviors positively. It suggests active social media participation can extend beyond the pandemic, fostering ongoing health awareness.
APA, Harvard, Vancouver, ISO, and other styles
2

Novakovic, Djordje, Platon Sovilj, Nikola Petrovic, Milan Milovanovic, Jaroslaw Makal, and Wojciech Walendziuk. "Measurement of Event-Related Brain Potentials (ERP) Amplitude and Latency Based on Digital Stochastic Measurement over Interval." Elektronika ir Elektrotechnika 26, no. 2 (April 25, 2020): 59–68. http://dx.doi.org/10.5755/j01.eie.26.2.25755.

Full text
Abstract:
In this paper, the measurement of event-related brain potentials (ERP) amplitude and latency based on digital stochastic measurement over interval (DSMI) method are described. Different variations of the measurement system are considered. It was found that measurement errors of amplitude increase with the reduction of the examination time. However, the measurement errors for ERP peak latency remain relatively small. This makes the system useful for practical implementations when the latency is the most interesting parameter and requirements for a short measurement time are of high priority.
APA, Harvard, Vancouver, ISO, and other styles
3

Huang, Sai, Mei Yang, Xin-Yu Deng, Qian Jiang Zhu, Ying Huang, Zhu Tao, and Kai Chen. "Trans-4-[4-(dimethylamino)styryl]-1-methylpyridinium Iodide@Hemimethylcucurbit[6]uril Fluorescent Probe for Anion Recognition." Australian Journal of Chemistry 72, no. 7 (2019): 533. http://dx.doi.org/10.1071/ch19119.

Full text
Abstract:
In the present work, a host–guest system of a hemimethyl-substituted cucurbit[6]uril derived from 3α-methyl-glycoluril (HMeQ[6]) and a hemicyanine dye, trans-4-[4-(dimethylamino)styryl]-1-methylpyridinium iodide (t-DSMI) showing strong fluorescence emission has been evaluated as a fluorescent probe. The results of a preliminary systematic study on the detection of a series of inorganic anions have revealed that this Q[n]-based host–guest fluorescent probe shows clear responses to BF4− and H2PO4− anions through distinct fluorescence quenching. Application of this Q[n]-based host–guest interaction system in anion recognition or detection opens a new avenue in Q[n] chemistry.
APA, Harvard, Vancouver, ISO, and other styles
4

Piatt, Gretchen A., Elizabeth A. Rodgers, Lingshu Xue, and Janice C. Zgibor. "Integration and Utilization of Peer Leaders for Diabetes Self-Management Support: Results From Project SEED (Support, Education, and Evaluation in Diabetes)." Diabetes Educator 44, no. 4 (May 28, 2018): 373–82. http://dx.doi.org/10.1177/0145721718777855.

Full text
Abstract:
Purpose The purpose of the study was to evaluate the effectiveness of a peer leader-led (PL) diabetes self-management support (DSMS) group in achieving and maintaining improvements in A1C, self-monitoring of blood glucose (SMBG), and diabetes distress in individuals with diabetes. Diabetes self-management support is critical; however, effective, sustainable support models are scarce. Methods The study was a cluster randomized controlled trial of 221 people with diabetes from 6 primary care practices. Practices and eligible participants (mean age: 63.0 years, 63.8% female, 96.8% white, 28.5% at or below poverty level, 32.5% using insulin, A1C ≥7%: 54.2%) were randomized to diabetes self-management education (DSME) + PL DSMS (n = 119) or to enhanced usual care (EUC) (DSME + traditional DSMS with no PL; n = 102). Data were collected at baseline, after DSME (6 weeks), after DSMS (6 months), and after telephonic DSMS (12 months). Results Decreases in A1C occurred between baseline and post-DSME in both groups. Both groups sustained improvements during DSMS, but A1C levels increased during telephonic DSMS. Improvements in self-monitoring of blood glucose were observed in both groups following DSME and were sustained throughout. At study end, the intervention group was 4.3 times less likely to have diabetes regimen–related distress compared to EUC. Conclusions PL DSMS is as effective as traditional DSMS in helping participants to maintain glycemic control and self-monitoring of blood glucose (SMBG) and more effective at improving distress. With increasing diabetes prevalence and shortage of diabetes educators, it is important to integrate and use low-cost interventions in high-risk communities that build on available resources.
APA, Harvard, Vancouver, ISO, and other styles
5

Lee, Chia-Lun, Chiu-Chu Lin, and Robert Anderson. "Psychometric evaluation of the Diabetes Self-Management Instrument Short Form (DSMI-20)." Applied Nursing Research 29 (February 2016): 83–88. http://dx.doi.org/10.1016/j.apnr.2015.04.013.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yang, Rui‐Yu, Xin‐Yu Deng, Ying Huang, Yun‐Qian Zhang, and Zhu Tao. "Recognition of Lanthanide Metal Cations by t ‐DSMI@Alkyl‐Substituted Cucurbit[6]uril Probes." ChemistrySelect 5, no. 28 (July 27, 2020): 8649–55. http://dx.doi.org/10.1002/slct.202000021.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mulyani, Santi, Sri Hartati Pratiwi, and Dadang Purnama. "MANAJEMEN DIRI PASIEN DIABETES MELITUS TIPE 2 SELAMA PANDEMI COVID-19." SENTRI: Jurnal Riset Ilmiah 2, no. 8 (August 5, 2023): 3061–68. http://dx.doi.org/10.55681/sentri.v2i8.1331.

Full text
Abstract:
Dampak yang ditimbulkan akibat pandemi COVID-19 yaitu terganggunya manajemen diri pasien Diabetes Melitus Tipe 2. Tujuan penelitian ini adalah untuk mengetahui gambaran manajemen diri pasien Diabetes Melitus Tipe 2 di Masa Pandemi COVID-19. Jenis penelitian yang digunakan adalah deskriptif kuantitatif, jumlah sampel pada penelitian ini sebanyak 30 dengan kriteria pasien Diabetes Melitus Tipe 2 yang sudah menderita Diabetes melitus >3 bulan. Penelitian ini menggunakan kuesioner Diabetes Self Management Instrument (DSMI) yang terdiri dari 5 domain. Berdasarkan hasil penelitian menunjukan sebagian besar responden memiliki perilaku manajemen diri sedang. Berdasarkan domain integrasi diri sebagian besar responden memiliki perilaku manajemen diri sedang, domain regulasi diri, interaksi dengan petugas kesehatan, periksa gula darah sendiri sebagian besar responden memiliki perilaku manajemen diri rendah, sementara domain kepatuhan terhadap pengobatan sebagian besar responden memiliki perilaku manajemen diri tinggi. Oleh karena itu, perawat komunitas diharapkan dapat memaksimalkan perannya sebagai health educator serta program khusus pasien DM seperti edukasi kesehatan, senam diabetes, pengecekan kadar gula darah dan konsultasi terkait penyakit serta mengoptimalkan kunjungan rumah.
APA, Harvard, Vancouver, ISO, and other styles
8

M. Lad, Pramod, and Rebecca Dahl. "The data and safety monitoring board in sponsored pediatric clinical trials: practical applications." Journal of Hospital Administration 4, no. 1 (January 13, 2015): 57. http://dx.doi.org/10.5430/jha.v4n1p57.

Full text
Abstract:
The Data and Safety Monitoring Board (DSMB) monitors the progress of clinical trials for safety and implements stopping rules as needed. Although NIH and FDA guidelines recommend the use of a DSMB for phase I, II, and III pediatric clinical trials, the manner in which the DSMB is constituted has received little attention. In this study we reviewed the Institutional Review Board (IRB) applications submitted between 2008 and 2012 at our institution (Children’s Hospital Los Angeles) for phase I, II and III studies which were multi-site, sponsored and performed under a sponsor’s Investigation New Drug Application (IND) for the type of data and safety monitoring that was being used. Our results indicate that approximately two-third of the studies used an independent DSMB, 10% utilized a sponsor’s DSMB and the remaining studies (25%) did not utilize a DSMB and relied instead on safety monitoring by the Principal Investigator (PI) and the medical monitor/director. This pattern was observed across all study phases and for blinded as well as unblinded studies. Our result suggests that a Data and Safety Monitoring Plan (DSMP), although required by the IRB, is rarely submitted by the sponsor at the time of application. Instead the DSMP is submitted to the IRB by the PI on IRB supplied templates. IRB review of these completed templates were critical to ensuring DSMB related compliance. Additionally, a significant percent of sponsored clinical trials used the PI or an individual designated as medical director/monitor, rather than constituting a DSMB.
APA, Harvard, Vancouver, ISO, and other styles
9

Hibberd, Patricia L., and Debra L. Weiner. "Monitoring Participant Safety in Phase I and II Interventional Trials: Options and Controversies." Journal of Investigative Medicine 52, no. 7 (November 1, 2004): 446–52. http://dx.doi.org/10.1136/jim-52-07-36.

Full text
Abstract:
BackgroundThe need for phase I and II clinical trials to have a data and safety monitoring plan (DSMP) is widely accepted; however, whether and/or when these trials should also have oversight by a data and safety monitoring board (DSMB) is controversial. Monitoring requirements also depend on whether the study is funded by the National Institutes of Health, funded and/or monitored by the US Food and Drug Administration (FDA), or funded by industry. However, there is little guidance about when and how to constitute a DSMB for phase I and II clinical trials.ObjectivesThe objectives of this article are to suggest guidelines for when and how to constitute a DSMB for phase I and II studies and to highlight the similarities and differences between DSMBs monitoring phase I and II versus phase III clinical studies. We highlight the utility of these guidelines in the safety monitoring of a mechanism of disease-based study of inhaled nitric oxide for acute vaso-occlusive crisis in pediatric patients with sickle cell disease that was funded and regulated by the FDA.ConclusionThe goal of DSMPs regardless of the phase of the clinical trial is to protect participant safety and ensure the integrity and validity of the data. A DSMB can ensure that risks and data are evaluated in a timely, efficient, and unbiased manner. We describe “risk-based” guidelines to determine situations in which a DSMB may be an appropriate addition to a DSMP for phase I and II clinical trials. We also address the roles and responsibilities of the DSMB for these studies.
APA, Harvard, Vancouver, ISO, and other styles
10

Hibberd, Patricia L., and Debra L. Weiner. "Monitoring Participant Safety in Phase I and II Interventional Trials: Options and Controversies." Journal of Investigative Medicine 52, no. 7 (November 2004): 446–52. http://dx.doi.org/10.1177/108155890405200736.

Full text
Abstract:
Background The need for phase I and II clinical trials to have a data and safety monitoring plan (DSMP) is widely accepted; however, whether and/or when these trials should also have oversight by a data and safety monitoring board (DSMB) is controversial. Monitoring requirements also depend on whether the study is funded by the National Institutes of Health, funded and/or monitored by the US Food and Drug Administration (FDA), or funded by industry. However, there is little guidance about when and how to constitute a DSMB for phase I and II clinical trials. Objectives: The objectives of this article are to suggest guidelines for when and how to constitute a DSMB for phase I and II studies and to highlight the similarities and differences between DSMBs monitoring phase I and II versus phase III clinical studies. We highlight the utility of these guidelines in the safety monitoring of a mechanism of disease–based study of inhaled nitric oxide for acute vaso-occlusive crisis in pediatric patients with sickle cell disease that was funded and regulated by the FDA. Conclusion The goal of DSMPs regardless of the phase of the clinical trial is to protect participant safety and ensure the integrity and validity of the data. A DSMB can ensure that risks and data are evaluated in a timely, efficient, and unbiased manner. We describe “risk-based” guidelines to determine situations in which a DSMB may be an appropriate addition to a DSMP for phase I and II clinical trials. We also address the roles and responsibilities of the DSMB for these studies.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "DSMI"

1

Shabani, Shahpar. "Pure Java interface to a DSMS : Pure Java interface to a DSMS." Thesis, Uppsala universitet, Institutionen för informationsteknologi, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-423975.

Full text
Abstract:
SCSQ (Scalable Stream Query processor) is a data stream management system (DSMS) that allows different kinds of distributed high-volume infinite streams to be queried. The current Java interface to SCSQ usesC libraries to communicate between Java and a SCSQ server. Therefore, a pure Java client-server interface to SCSQ is needed. Unlike regular databases, DSMS can process queries over infinite streams. Such continuous queries (CQs) are running until they are explicitlyterminated. The interface must be able to process infinite scans of continuous query results. This master thesis implements a pure Java client-server interface to SCSQ which can handle CQs.
APA, Harvard, Vancouver, ISO, and other styles
2

Piekos, Edward S. (Edward Stanley). "DSMC modeling of micromechanical devices." Thesis, Massachusetts Institute of Technology, 1995. http://hdl.handle.net/1721.1/11149.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Dudová, Zuzana. "Reštrukturalizácia logistického reťazca spoločností DSI Slovakia, s.r.o. a DSI Czech, s.r.o." Master's thesis, Vysoká škola ekonomická v Praze, 2009. http://www.nusl.cz/ntk/nusl-10844.

Full text
Abstract:
The diploma thesis is focused on the logistic system of the particular companies. In the theory part you can find explanation for the following expressions: insourcing, backsourcing and outsourcing, focusing on the reasons that lead companies to outsource operations, advantages and disadvantages which outsourcing entail and the whole process description. Practical part focuses on a particular description of general logistical system of companies DSI Czech, s.r.o. and DSI Slovakia, s.r.o.; identifying a weak part of the system and the analysis of possible solutions with the attention to the high level of services provided with the optimal costs. The proposal considers the possibility of using outsourcing or continuing to use inhouse logistic management.
APA, Harvard, Vancouver, ISO, and other styles
4

Hapetta, Darius. "Biogenese von Perillen durch Pleurotus ostreatus DSMZ 1020." [S.l.] : [s.n.], 2006. http://deposit.ddb.de/cgi-bin/dokserv?idn=983880166.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Samson, Pierre. "Adaptation logicielle pour et par les i DSML." Thesis, Pau, 2015. http://www.theses.fr/2015PAUU3025/document.

Full text
Abstract:
L’un des buts de l’Ingénierie Dirigée par les Modèles (IDM) est de considérer les modèles comme des éléments productifs pour le développement d’applications. Dans cette optique, une nouvelle tendance concerne les modèles exécutables où un modèle produit en phase de conception est réutilisé en tant que tel en phase d’exécution grâce aux interpreted Domain-Specific Modeling Language (i DSML) qui sont interprétés par un moteur d’exécution. Cette façon de procéder permet de gagner du temps lors du développement d’un logiciel et est par conséquent moins coûteux. D’autre part, les logiciels peuvent être dotés de capacités adaptatives. Ces applications adaptatives sont généralement confrontées à un contexte qui est plus ou moins connu et susceptible de changer au cours de l’exécution et auquel elles vont devoir faire face en modifiant leur comportement dynamiquement, c’est-à-dire sans interruption de service. De telles adaptations dynamiques et automatiques sont censées éviter une phase de maintenance onéreuse pour le logiciel. Nous avons donc d’un côté les i DSML qui permettent de réduire les coûts de développement d’une application et de l’autre côté l’adaptation logicielle qui permet de réduire les coûts de maintenance d’un programme. Dans cette thèse nous souhaitons prendre le meilleur des deux mondes en fusionnant les deux idées. Le résultat revient in fine à directement adapter l’exécution d’un modèle via des i DSML adaptables. Pour cela, nous proposons une caractérisation des i DSML adaptables, la définition du concept de famille pour gérer l’adaptation des i DSML, puis la création d’un langage exécutable d’orchestration dédié à l’adaptation, aboutissant ainsi au fait particulier d’adapter un i DSML par un autre i DSML. Enfin, un prototype à base de deux moteurs d’exécution est proposé avec son implémentation en Java/EMF
One of the goals of Model-Driven Engineering (MDE) is to treat models as productive elements for software development. From this point of view, a new trend is about executable models where a model that is produced at design time is reused as such at runtime through interpreted Domain-Specific Modeling Languages (i DSMLs) that are interpreted by an execution engine. This way to proceed allows to save time during the software development and consequently is more cost-effective. On the other hand, software can provide adaptive capabilities. These adaptive applications are often facing a context which is more or less known and which may change during the execution and they will address these various situations by modifying dynamically their own behavior, i.e. without any service disruption. Such dynamic and automatic adaptations ought to avoid a too expensive maintenance stage for the program. We have on one hand the i DSMLs that allow to decrease the development costs of a program and on the other hand the software adaptation that allows to decrease the maintenance costs of an application. In this thesis, we must succeed in having the best of both worlds by merging these two ideas. The result is ultimately to directly adapt the model execution through adaptable i DSMLs. To this end, we propose a characterization of adaptable i DSMLs, the definition of the family concept to manage adaptation of i DSMLs, then the creation of an executable orchestration language for adaptation, thereby leading to the fact that an i DSML is adapted through an other i DSML. Finally, a prototype based on two execution engines is proposed with its implementation in Java/EMF
APA, Harvard, Vancouver, ISO, and other styles
6

Lunde, Dominic Charles. "A Homegrown DSMC-PIC Model for Electric Propulsion." DigitalCommons@CalPoly, 2019. https://digitalcommons.calpoly.edu/theses/2066.

Full text
Abstract:
Powering spacecraft with electric propulsion is becoming more common, especially in CubeSat-class satellites. On account of the risk of spacecraft interactions, it is important to have robust analysis and modeling tools of electric propulsion engines, particularly of the plasma plume. The Navier-Stokes equations used in classic continuum computational fluid dynamics do not apply to the rarefied plasma, and therefore another method must be used to model the flow. A good solution is to use the DSMC method, which uses a combination of particle modeling and statistical methods for modeling the simulated molecules. A DSMC simulation known as SINATRA has been developed with the goal to model electric propulsion plumes. SINATRA uses an octree mesh, is written in C++, and is designed to be expanded by further research. SINATRA has been initially validated through several tests and comparisons to theoretical data and other DSMC models. This thesis examines expanding the functionality of SINATRA to simulate charged particles and make SINATRA a DSMC-PIC hybrid. The electric potential is calculated through a 7-point 3D stencil on the mesh nodes and solved with a Gauss-Seidel solver. It is validated through test cases of charged particles to demonstrate the accuracy and capabilities of the model. An ambipolar diffusion test case is compared to a neutral diffusion case and the electric field is shown to stabilize the diffusion rate. A steady state flow test case shows the simulation is able to stabilize and solve the electric potential for a plume-like scenario. It includes additional features to simplify further research including a comprehensive user manual, industry-standard version control, text file inputs, GUI control, and simple parallelism of the simulation. Compilation and execution are standardized to be simple and platform independent to allow longevity of the code base. Finally, the execution bottlenecks of linking particles to cells and particle moving were removed to reduce the simulation time by 95%.
APA, Harvard, Vancouver, ISO, and other styles
7

Gonçalves, Maria Lopes Facó Estermínio. "DSMs e depressão: dos sujeitos singulares aos transtornos universais." Universidade do Estado do Rio de Janeiro, 2007. http://www.bdtd.uerj.br/tde_busca/arquivo.php?codArquivo=5026.

Full text
Abstract:
Este estudo tenciona discutir o problema da conceituação das doenças mentais, a partir dos DSMs e dos diferentes paradigmas que os embasaram. O DSM (manual estatístico e diagnóstico de transtornos mentais) é um manual, de influência internacional, para profissionais da saúde mental, que lista diferentes categorias de transtornos mentais, de acordo com a Associação Psiquiátrica Norte-Americana. Desde a sua primeira publicação, em 1952, já foi submetido a cinco revisões (DSM II, DSM III, DSM III-R, DSM IV e DSM IVTR). Escolhemos a categoria diagnóstica da depressão, objetivando realizar um rastreamento conceitual, desde o DSM II - modelo até então marcado pela psicanálise, depois ressaltando o DSM III, que, em 1980, promove uma mudança de paradigma no conhecimento psiquiátrico, ao apresentar um modelo que se propõe descritivo e ateórico até o DSM IV-TR. Dessa perspectiva, são assinaladas algumas considerações e pontos de discussão entre a chamada psiquiatria biológica e a psicanálise, no que diz respeito às suas respectivas influências na forma de entender o diagnóstico psiquiátrico, enfatizando a categoria diagnóstica da depressão.
This study intends to discuss the issue of categorizing mental disorders, considering DSMs and its paradigms. The Diagnostic and Statistical Manual of Mental Disorder (DSM) is a handbook, used worldwide, for mental professionals that lists different categories of mental disorder, according to the American Psychiatric Association. The DSM has gone through five revisions (DSM II, DSM III, DSM III-R, DSM IV e DSM IV- TR) since it was first published in 1952. Electing the concept of depression, this study analyses its diagnosis criteria from DSM II, a psychoanalytic influenced manual to DSM IV-TR, with an emphasis upon DSM III which, in 1980, represents a turning point in psychiatric paradigms, intending to be not theoretical and descriptive. From this perspective, the intention is to outline some considerations and discussions between the so-called biological psychiatric and the psychoanalytic theory, according to its influences in the psychiatric diagnosis understanding, emphasizing the category of depression.
APA, Harvard, Vancouver, ISO, and other styles
8

Holm-Petersen, Christina. "Stolthed og fordom kultur- og identitetsarbejde ved skabelsen af en ny /." København : DSI - Institut for Sundhedsvæsen, 2008. http://www.dsi.dk/Publikationer/DSI-rapporter/2008.01/CHP_Stolthed_og_fordom_til_hjemmeside.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Palaniswaamy, Geethpriya. "DSMC multicomponent aerosol dynamics sampling algorithms and aerosol processes /." Diss., Columbia, Mo. : University of Missouri-Columbia, 2007. http://hdl.handle.net/10355/4737.

Full text
Abstract:
Thesis (Ph. D.)--University of Missouri-Columbia, 2007.
The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file (viewed Dec. 12, 2007). Vita. Includes bibliographical references.
APA, Harvard, Vancouver, ISO, and other styles
10

Palharini, Rodrigo Cassinel. "Atmospheric reentry modelling using an open-source DSMC code." Thesis, University of Strathclyde, 2014. http://oleg.lib.strath.ac.uk:80/R/?func=dbin-jump-full&object_id=24375.

Full text
Abstract:
Aerothermodynamic investigations of hypersonic re-entry vehicles provides crucial information to other key disciplines as structures and materials, assisting the development of efficient and lightweight thermal protection systems (TPS). Under the transitional flow regime, where chemical and thermal nonequilibrium are predominant, the most successful numerical method for such studies has been the direct simulation Monte Carlo (DSMC) numerical technique. In the present work, the solver dsmcFoam has been benchmarked against experimental, numerical, and theoretical data found in the open literature for inert and chemically reactive flows. The Quantum-Kinetic (QK) chemistry model with a full set of 19 chemical reactions has been implemented into the code and it proved to be essential in the correct prediction of the shock wave structure and heating flux to the vehicle's surface during the re-entry phase. Having implemented the QK chemistry model, the dsmcFoam solver was employed to investigate thermal protection system discontinuities. These TPS discontinuities, representative of panel-to-panel joints or the impact of micro meteorites/ice droplets, were modelled as a family of cavities with different length-to-depth ratios. The results showed that the cavity length has a significant impact on the flowfield structure and aerodynamic surface quantities distribution inside and around the cavities. In addition, for L/D = 5, the flow separates at the cavity upstream lip and attaches to the cavity bottom surface, representing a potentially catastrophic feature under rarefied gas conditions. Furthermore, the same phenomena is only observed in the continuum regime when L/D > 14.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "DSMI"

1

College, Defense Systems Management, ed. DSMC at a glance. Fort Belvoir, VA (9820 Belvoir Rd., Ft Belvoir 22060-5565): Defense Systems Management College, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

College, Defense Systems Management, ed. DSMC at a glance. Fort Belvoir, VA (9820 Belvoir Rd., Ft Belvoir 22060-5565): Defense Systems Management College, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

College, Defense Systems Management, ed. DSMC at a glance. Fort Belvoir, VA (9820 Belvoir Rd., Ft Belvoir 22060-5565): Defense Systems Management College, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lintsen, Harry, and T. van Helvoort. Research tussen vetkool en zoetstof: Zestig jaar DSM Research 1940-2000. [Eindhoven]: Stichting Historie der Techniek, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

A, Widiger Thomas, and American Psychiatric Association, eds. DSM-IV sourcebook. Washington, DC: American Psychiatric Association, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

A, Widiger Thomas, and American Psychiatric Association. Task Force on DSM-IV., eds. DSM-IV sourcebook. Washington, DC: Published by the American Psychiatric Association, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Frances, Allen. DSM-IV guidebook. Washington, DC: American Pyschiatric Press, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Mehzad, Javeed, Edighoffer Harold H, and Langley Research Center, eds. Status of DSMT research program. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hall, Mary-jo. Process improvement: The DSMC approach. Fort Belvoir, Va: Defense Systems Management College, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Data Security Council of India. DSCI security framework: Best practices. New Delhi: Data Security Council of India, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "DSMI"

1

Sedighi, Art, and Milton Smith. "DSIM." In Fair Scheduling in High Performance Computing Environments, 47–50. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-14568-2_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Paulín, Gabriel Legorreta, Jean-François Parrot, Rutilio Castro-Miguel, Lilia Arana-Salinas, and Fernando Aceves Quesada. "Digital Terrain Models Derived from Unmanned Aerial Vehicles and Landslide Susceptibility." In Progress in Landslide Research and Technology, Volume 2 Issue 1, 2023, 389–99. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-39012-8_20.

Full text
Abstract:
AbstractDigital Terrain Models (DTMs) are among the most important spatial information tools used in geomorphological landslide assessment because they allow the extraction of crucial attributes, such as landslide geometry, slope, terrain curvature, etc. However, at a local scale, the assessment of remote volcanic terrains is difficult because the DTMs have poor spatial and temporal representation. Worldwide, geomorphological analysis of landslides processes in mountainous terrains with difficult access has benefited with virtual topography representations using high-resolution Digital Surface Models (DSMs) generated by imagery captured by unmanned aerial vehicles (UAV). These DSMs include not only the ground topography, but also other landscape elements such as vegetation, buildings, cars, etc. These natural and anthropogenic elements are considered as non-relevant information or noise to obtain only the ground information. Photogrammetric post-processing of the DSM is required to derive a DTM that represent only ground topography. This research uses a Canopy Height Model (CHM), an altimetric selection mask, weights, a low-pass filter, and specific algorithms to generate a DTM from a high-resolution DSM derived from the UAVs and a DTM of a 1:50,000 map. With the DTM thus obtained, landslide susceptibility assessment was then conducted. The assessment completed by means of multiple logistic regression (MLR) in the study area. The Cerro de la Miel in Tepoztlán, State of Morelos, Mexico, is selected to exemplify this method. The study area was affected by rockfalls and shallow landslides during the earthquake on September 19, 2017. The results show an adequate representation of the ground topography, and eliminating most of the noise coming from the high-resolution DSM allowed us to define the landslide susceptibility. For the calculated landslide susceptibility, there is a 76% match between the model and the landslide inventory.
APA, Harvard, Vancouver, ISO, and other styles
3

Chakravarthy, Sharma, and Qingchun Jiang. "DSMS CHALLENGES." In Stream Data Processing: A Quality of Service Perspective, 23–31. Boston, MA: Springer US, 2009. http://dx.doi.org/10.1007/978-0-387-71003-7_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Simola, Nicola, Micaela Morelli, Tooru Mizuno, Suzanne H. Mitchell, Harriet de Wit, H. Valerie Curran, Celia J. A. Morgan, et al. "DSM." In Encyclopedia of Psychopharmacology, 441. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-540-68706-1_1675.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Karniel, Arie, and Yoram Reich. "From DSM to DSM Net." In Managing the Dynamics of New Product Development Processes, 123–51. London: Springer London, 2011. http://dx.doi.org/10.1007/978-0-85729-570-5_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Daniel, Milan. "Plausibility in DSmT." In Advances in Intelligent and Soft Computing, 179–87. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-29461-7_21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Loomans, Dirk, Manuela Matz, and Michael Wiedemann. "Ausweitung des DSMS." In Praxisleitfaden zur Implementierung eines Datenschutzmanagementsystems, 235–40. Wiesbaden: Springer Fachmedien Wiesbaden, 2014. http://dx.doi.org/10.1007/978-3-658-02806-0_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Tremblay, Mark S., Nicholas Kuzik, Stuart J. H. Biddle, Valerie Carson, Mai J. M. Chinapaw, Dorothea Dumuid, Wendy Yajun Huang, Travis J. Saunders, Amanda E. Staiano, and Russell R. Pate. "Digital Screen Media Use, Movement Behaviors, and Child Health." In Handbook of Children and Screens, 63–72. Cham: Springer Nature Switzerland, 2024. https://doi.org/10.1007/978-3-031-69362-5_10.

Full text
Abstract:
AbstractThis chapter summarizes the associations between children’s digital screen media use (DSMU) and their health, within the 24-h movement behavior framework (physical activities, sedentary behaviors, sleep), provides recommendations for healthy DSMU, and highlights future research directions. Key concepts include behavior displacement, combined associations, and DSMU context and content. Displacement examples include more DSMU decreasing time for healthier behaviors (e.g., physical activity or sleep) or replacing reading books and magazines with DSMU alternatives (e.g., texting, social media). How DSMU affects the relationships between various combinations of movement behaviors and children’s health is largely unknown. Total DSMU is most frequently studied, but a deeper understanding of all movement behaviors requires examining the content and context of DSMUs. Insufficiently examining context and content inhibits a fulsome understanding of the health impact of child DSMU within a 24-h movement paradigm. Measurement limitations include overreliance on self- or proxy-report measures. Preliminary evidence may suggest that high DSMU contributes to an unhealthy movement behavior profile, but DSMU could also contribute to a healthy movement behavior profile (e.g., active video gaming, goal setting apps). Whether and how much DSMU can be part of a healthy combination of physical activities, sedentary behaviors, and sleep requires further study.
APA, Harvard, Vancouver, ISO, and other styles
9

Karniel, Arie, and Yoram Reich. "DSM Enhancements." In Managing the Dynamics of New Product Development Processes, 51–61. London: Springer London, 2011. http://dx.doi.org/10.1007/978-0-85729-570-5_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Lafrance, Michelle N., and Suzanne McKenzie-Mohr. "DSM, Overview." In Encyclopedia of Critical Psychology, 501–6. New York, NY: Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4614-5583-7_375.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "DSMI"

1

Maurer, Maik, Udo Pulm, Felix Ballestrem, John Clarkson, and Udo Lindemann. "The Subjective Aspects of Design Structure Matrices: Analysis of Comprehension and Application and Means to Overcome Differences." In ASME 8th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2006. http://dx.doi.org/10.1115/esda2006-95200.

Full text
Abstract:
Design Structure Matrices (DSMs) are a widely spread and useful tool for structuring and analysing design processes and related aspects such as products themselves, organisations, etc. Though this tool is simple, yet quite powerful, problems might arise in using them due to the subjectivity of the set up model within the DSM, as it is with every model building exercise. This contribution looks at the individual differences in filling out a DSM, the reasons for those differences, as well as means to overcome them. This covers a clear procedure for using DSMs, extended tools using and supporting DSMs, and a better understanding of this matrix approach. The latter covers different issues and “linkage types” that can be addressed by a DSM and its use in a system theory context. It also emphasises that DSMs are just one method using a matrix approach, which is only one representation of a graph or a network, with other methods using similar approaches and covering other useful aspects. A simple, yet important contribution of our research is the appropriate direction of DSMs, i.e. the dependencies going from rows to columns or vice versa, since this is an often discussed subject concerning DSMs.
APA, Harvard, Vancouver, ISO, and other styles
2

Alizon, Fabrice, Seung Ki Moon, Steven B. Shooter, and Timothy W. Simpson. "Three Dimensional Design Structure Matrix With Cross-Module and Cross-Interface Analyses." In ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/detc2007-34510.

Full text
Abstract:
Many companies that struggle with product variety and configuration management issues turn to a module-based design approach. Although this approach is well-known to be efficient for managing variety of a product family, current methods do not enable designers to handle both modularity and variety within a product family. The Design Structure Matrix (DSM) has been widely used to identify modules within a product, but its use to identify modules across a family of products has been limited. In this context we propose two tools based on an extension of the basic DSM to manage variety of an entire product family. The Variety Design Structure Matrix, DSMV, handles variety of the product family and 3D Design Structure Matrix, DSM3D, enables visual analysis of across the entire product family. These two tools, combined into a single approach, enable analysis of the product family at many levels — family product, module, and interfaces — to better specify modules and interfaces across all of the products in the family. A case study involving a family of three single-use cameras is used to demonstrate the application of these new DSMs and accompanying cross-module and cross-interface analyses. This new approach can be applied during detailed studies as well as in the early stages of the design process.
APA, Harvard, Vancouver, ISO, and other styles
3

Wilschut, Tim (T )., Pascal (L F. P. ). Etman, Jacobus (J E. ). Rooda, and Ivo (I J. B. F. ). Adan. "Multi-Level Flow-Based Markov Clustering for Design Structure Matrices." In ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/detc2016-59483.

Full text
Abstract:
For decomposition and integration of systems one requires extensive knowledge on system structure. A Design Structure Matrix (DSM) can provide a simple, compact and visual representation of dependencies between system elements. By permuting the rows and columns of a DSM using a clustering algorithm, the underlying structure of a system can be revealed. In this paper, we present a new DSM clustering algorithm based upon Markov clustering. The developed clustering algorithm is able to cope with the presence of ‘bus’ elements, returns multilevel clusters, is capable of clustering both directed as well as undirected DSMs, and allows the user to control the cluster results by tuning only three input parameters.
APA, Harvard, Vancouver, ISO, and other styles
4

Brand, Howard J. J., and Bing Li. "SEMANTIC DIGITAL SURFACE MAP TOWARDS COLLABORATIVE OFF-ROAD VEHICLE AUTONOMY." In 2024 NDIA Michigan Chapter Ground Vehicle Systems Engineering and Technology Symposium. 2101 Wilson Blvd, Suite 700, Arlington, VA 22201, United States: National Defense Industrial Association, 2024. http://dx.doi.org/10.4271/2024-01-3877.

Full text
Abstract:
<title>ABSTRACT</title> <p>The fundamental aspect of unmanned ground vehicle (UGV) navigation, especially over off-road environments, are representations of terrain describing geometry, types, and traversability. One of the typical representations of the environment is digital surface models (DSMs) which efficiently encode geometric information. In this research, we propose a collaborative approach for UGV navigation through unmanned aerial vehicle (UAV) mapping to create semantic DSMs, by leveraging the UAV wide field of view and nadir perspective for map surveying. Semantic segmentation models for terrain recognition are affected by sensing modality as well as dataset availability. We explored and developed semantic segmentation deep convolutional neural networks (CNN) models to construct semantic DSMs. We further conducted a thorough quantitative and qualitative analysis regarding image modalities (between RGB, RGB+DSM and RG+DSM) and dataset availability effects on the performance of segmentation CNN models.</p> <p><bold>Citation:</bold> H. J. J. Brand, B. Li, “Semantic Digital Surface Map Towards Collaborative Off-Road Vehicle Autonomy”, In <italic>Proceedings of the Ground Vehicle Systems Engineering and Technology Symposium</italic> (GVSETS), NDIA, Novi, MI, Aug. 11-13, 2020.</p>
APA, Harvard, Vancouver, ISO, and other styles
5

Bracken, Jennifer, Sean Brennan, Clifford Lissenden, Timothy W. Simpson, Ian Van Sant, Karl Reichard, and Matthew Ng. "Change Propagation During Protoyping: A Case Study of a Robotic Inspection System for Dry Nuclear Waste Storage Casks." In ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/detc2018-86283.

Full text
Abstract:
In prototyping complex systems, concept iterations often reach a point where incremental modifications to one part in a complex system can produce unexpected, cascading changes in the rest of the system. This phenomenon can require time-consuming and expensive corrections, particularly when physical prototypes are involved — as was the situation in the case study presented here. A design tool, the Design Structure Matrix (DSM), is commonly used to predict change propagation in complex designs. Using several examples, this paper illustrates situations where conventional DSMs fail to predict change propagation in the prototypes created during a robotic inspection system design project, due to complex interactions and system design constraints. The case study discussed here, a robotic inspection system for a nuclear waste storage cask, included interactions not easily captured in a conventional DSM. It was these interactions that interfered with the use of this tool to predict design change propagation. The paper then presents a method that was conceived to manage such changes; a way of modifying conventional DSMs to include design constraints and components. The case study examples show that the resulting technique, called the C+C DSM method, would have better predicted mid-development change propagation in the prototyping process.
APA, Harvard, Vancouver, ISO, and other styles
6

Arantes, Luciana, Bertil Folliot, Liria M. Sato, and Pierre Sens. "A Proposal for a Parallel Programming Support for Multi-LAN platforms." In International Symposium on Computer Architecture and High Performance Computing. Sociedade Brasileira de Computação, 1999. http://dx.doi.org/10.5753/sbac-pad.1999.19790.

Full text
Abstract:
In the first part of this article, we present our proposal for a distributed shared memory system (DSM) for an interconnection of local-area networks (LANs). Our multi-LAN DSM will be composed of a set of per LAN lazy release consistency (LRC) memory model DSM systems. For controlling shared-memory updates, the LRC protocol of cach DSM will use the barrier-lock logical clocks, instead of the traditional per processor vector ones. This replacement provides modularity and scalability to some extent. The other enhancements to be added to the protocol aim the reduction of the number of messages and the volume of data exchanged between LANs for the sake of applications' performance. Data pre-fetching, simulation of a LAN-level cache and hierarchical execution of barriers are some of the strategies to be adopted. In the second part of the paper, we discuss the advantages of using the CPAR language for the development of parallel applications which run on top of shared-memory hierarchical platforms such as multi-LAN DSMs.
APA, Harvard, Vancouver, ISO, and other styles
7

Kreimeyer, Matthias, Stefanie Braun, Matthias Gu¨rtler, and Udo Lindemann. "Relating Two Domains via a Third: An Approach to Overcome Ambiguous Attributions Using Multiple Domain Matrices." In ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/detc2008-49249.

Full text
Abstract:
Design Structure Matrices (DSM) and Domain Mapping Matrices (DMM) are commonly used to model and analyze the relationships within one domain (DSM) or between two domains (DMM). Being assembled into one larger square matrix, having DSMs on its diagonal and DMMs in all other fields, a so-called Multiple Domain Matrix (MDM) is formed. When relating two domains using a DMM, a problem arises when the nature of one individual relationship between the two domains is to be described. Usually, this is modeled by annotating each relationship with the additional information, much like comments in spreadsheet software. This, however, is yet impossible if the relationships should be in matrix notation to allow for algorithmic matrix analyses. Equally, this way, the annotations are not accessible as elements of another matrix, e.g. as DSM. This paper suggests a generic principle to solve the described problem in a way consistent with the matrix methodology. It proposes an approach using MDM and is thereby able to unambiguously provide the nature of each relationship between the elements of two domains. As a DSM is a mere case of a DMM having two identical domains, the approach proposed can equally be used to enrich the relationships within a DSM.
APA, Harvard, Vancouver, ISO, and other styles
8

Liba, Natalja, Kaupo Kokamagi, Rauno Kunnapuu, and Kart Metsoja. "MONITORING AND ASSESSMENT OF STORM DAMAGE TO FORESTS USING THE PHOTOGRAMMETRIC METHOD." In 23rd SGEM International Multidisciplinary Scientific GeoConference 2023. STEF92 Technology, 2023. http://dx.doi.org/10.5593/sgem2023/2.1/s10.38.

Full text
Abstract:
The escalating intensity of climate change-induced storms necessitates efficient methods for surveying storm-damaged forests. This study conducted in Estonia employed Unmanned Aerial Vehicles (UAVs), equipped with compact cameras, to assess damage over a 16 square kilometer storm-affected area. We created digital surface models (DSMs) and orthophoto mosaics using two types of drones - a fixedwing and a multirotor. While both types had their distinct advantages depending on the terrain, a 70% x 70% overlap of images was found to be inadequate for proper alignment of images in heavily forested areas. Comparing drone-generated DSMs with existing DSM data was a quick method for locating storm-damaged areas, although not ideal for accurately calculating their extent. It was also found that orthophoto mosaics with a 0.2 m resolution were sufficient for damage analysis.
APA, Harvard, Vancouver, ISO, and other styles
9

Whitney, Daniel E., Qi Dong, Jared Judson, and Gregory Mascoli. "Introducing Knowledge-Based Engineering Into an Interconnected Product Development Process." In ASME 1999 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/detc99/dtm-8741.

Full text
Abstract:
Abstract Recently, a large automobile company implemented a Knowledge-based Engineering (KBE) application to help design an engine component. While the KBE developers aimed to facilitate a single engineer’s ability to design this component using only the KBE application, it can be shown that in fact this component’s design is tightly coupled to that of several others. Can KBE handle situations like this? How common are they? To address these and other questions, Design Structure Matrix (DSM) models were made of this component at three levels: system interactions, assembly of the component, and individual parts. The size, row names, and internal entries of these matrices were compared to matrices constructed from several conventional written design guides and a flowchart of the KBE application. In each case, the DSM contained more rows or more matrix entries per row, especially at the system interaction level. Since the DSMs were constructed by interviewing experienced engineers, one implication is that while low-aggregation information may be documented, system level information at this company mostly resides in people’s heads. An informal measure of “knowledge content” based on the number of matrix entries per row was shown to be consistent with similar measurements made on DSMs obtained by several other researchers. These results indicate some of the scope and complexity challenges that KBE faces.
APA, Harvard, Vancouver, ISO, and other styles
10

Eichinger, Markus, Maik Maurer, Udo Pulm, and Udo Lindemann. "Extending Design Structure Matrices and Domain Mapping Matrices by Multiple Design Structure Matrices." In ASME 8th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2006. http://dx.doi.org/10.1115/esda2006-95266.

Full text
Abstract:
Design Structure Matrices (DSMs) and Domain Mapping Matrices (DMMs) are generally used by designers for dynamic optimization of engineering design processes and products. Both methodologies help producing valuable results; however, they are lacking a holistic view onto the processes and products. Dependencies that span multiple product development domains can therefore not be recognized with isolated DSM or DMM analysis. In this paper, we present an integrative approach that combines DSMs and DMMs to obtain the Multiple Design Structure Matrix (MDSM). This methodology offers the possibility to analyze multiple product development domains using one coherent matrix representation form. A holistic perspective helps the designer to identify domain-spanning structures that would not have been recognized with single-domain optimization approaches or isolated analysis of the DSMs and DMMs. Domain-spanning structures are important to identify, as they may cause unpredictable product or process behavior. Our research showed that a holistic perspective can help designers to identify important elements more easily and therefore save time and enhance quality in analysis of engineering systems design. The framework we present consists of a proposal for the selection of appropriate product development domains, their integration, and the derivation of analysis results.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "DSMI"

1

Gallis, Michail A., and Edward Stanley Piekos. Accelerating DSMC data extraction. Office of Scientific and Technical Information (OSTI), October 2006. http://dx.doi.org/10.2172/922066.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Brown, C. L., and F. K. Frantz. Distributed System Modeling Environment (DSME). Fort Belvoir, VA: Defense Technical Information Center, July 1990. http://dx.doi.org/10.21236/ada226698.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wadsworth, D. C., D. B. VanGilder, I. J. Wysong, C. Kaplan, and D. Mott. SUPREM-DSMC Version 1.0 User's Manual. Fort Belvoir, VA: Defense Technical Information Center, July 2000. http://dx.doi.org/10.21236/ada411285.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hirst, E., J. Reed, B. Bronfman, G. Fitzpatrick, E. Hicks, E. Hirst, M. Hoffman, et al. Handbook of evaluation of utility DSM programs. [Demand-Side Management (DSM)]. Office of Scientific and Technical Information (OSTI), December 1991. http://dx.doi.org/10.2172/5688885.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gimelshein, Sergey, Gennady Markelov, and Marc Rieffel. Collision Models in the Hawk DSMC Implementation. Fort Belvoir, VA: Defense Technical Information Center, July 1996. http://dx.doi.org/10.21236/ada448751.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Schneller, George. Program Manager - A Bimonthly Magazine of DSMC. Fort Belvoir, VA: Defense Technical Information Center, December 1999. http://dx.doi.org/10.21236/ada372041.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wadsworth, Dean C., Douglas B. VanGilder, and Virendra K. Dogra. Gas-Surface Interaction Model Evaluation for DSMC Applications. Fort Belvoir, VA: Defense Technical Information Center, July 2002. http://dx.doi.org/10.21236/ada406005.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Pulido, Jesus. DSI Python API Demo May 2023. Office of Scientific and Technical Information (OSTI), July 2023. http://dx.doi.org/10.2172/1992226.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Brown, M. A., and P. E. Mihlmester. Summary of California DSM impact evaluation studies. Office of Scientific and Technical Information (OSTI), October 1994. http://dx.doi.org/10.2172/10105917.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hirst, E. Effects of utility DSM programs on risk. Office of Scientific and Technical Information (OSTI), May 1992. http://dx.doi.org/10.2172/10146326.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'DSMI' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography