Relevant bibliographies by topics / Dimensional stability

Academic literature on the topic 'Dimensional stability'

Author: Grafiati
Published: 4 June 2021
Last updated: 14 September 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Dimensional stability.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Dimensional stability"

1

Calhoun, J. M. "Dimensional Stability of Film." Photogrammetric Record 1, no. 3 (August 26, 2006): 67–68. http://dx.doi.org/10.1111/j.1477-9730.1954.tb01004.x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Eden., J. A. "Dimensional Stability of Film." Photogrammetric Record 1, no. 4 (August 26, 2006): 60–62. http://dx.doi.org/10.1111/j.1477-9730.1954.tb01013.x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Szydlowski, M. "Stability and dimensional reduction." General Relativity and Gravitation 20, no. 3 (March 1988): 221–38. http://dx.doi.org/10.1007/bf00759182.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Adelusi, Emmanuel, Olayiwola Ajala, Reuben Afolabi, and Kayode Olaoye. "Strength and dimensional stability of cement-bonded wood waste-sand bricks." Journal of Forest Science 67, No. 12 (December 17, 2021): 545–52. http://dx.doi.org/10.17221/98/2021-jfs.

Full text
Abstract:
Conservation of trees which belong to renewable natural resources in developing countries through judicious utilization in building industry has been seriously left unattended to over the years. The utilization of this unprocessed wealth materials which could serve as one of the alternative constituents in construction materials is now a global concern. Therefore, the needs to investigate the strength and water sorption property of wood waste as a partial replacing material in brick production for building construction arise. Sawdust, sand and cement were mixed together at three different mixing ratios of 1 : 1 : 1, 1 : 1 : 2 and 1 : 1 : 3. The brick samples were replicated three times and subjected to water absorption, density and compressive strength tests. The results show that the effect of the equal volume of sand and sawdust with a subsequent increase in the cement portion at each mixing ratio level gave compact bricks without sudden fracture, reduced unit weight of bricks and subsequent lower water sorption properties of the bricks. The bricks show potentials to be used for wall partitioning. The introduction of sawdust also serves as partial sand replacement in concrete brick making.
APA, Harvard, Vancouver, ISO, and other styles
5

Bostöm, Bernt. "How to Measure Dimensional Stability." JAPAN TAPPI JOURNAL 55, no. 11 (2001): 1579–85. http://dx.doi.org/10.2524/jtappij.55.1579.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

He, Xue—Zhong. "Global stability of n—dimensional." Applicable Analysis 50, no. 3 (January 1993): 253–62. http://dx.doi.org/10.1080/00036819308840196.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Abdessalem, Saber Ben, Fatma Abidi, Sofiene Mokhtar, and Saber Elmarzougui. "Dimensional Stability of Men’s Socks." Research Journal of Textile and Apparel 12, no. 4 (November 2008): 61–69. http://dx.doi.org/10.1108/rjta-12-04-2008-b006.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kader, A. Abd el, and J. C. Earnshaw. "Stability of two-dimensional foam." Philosophical Magazine A 76, no. 6 (December 1997): 1251–60. http://dx.doi.org/10.1080/01418619708214226.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bohnenkamp, David M. "Dimensional stability of occlusal splints." Journal of Prosthetic Dentistry 75, no. 3 (March 1996): 262–68. http://dx.doi.org/10.1016/s0022-3913(96)90482-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Torelli, N., and Ž. Gorišek. "Mexican tropical hardwoods — dimensional stability." Holz als Roh- und Werkstoff 53, no. 1 (January 1995): 277–80. http://dx.doi.org/10.1007/bf02716444.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Dimensional stability"

1

Keskin, Suleyman Bahadir. "Dimensional Stability Of Engineered Cementitiouscomposites." Phd thesis, METU, 2012. http://etd.lib.metu.edu.tr/upload/12614713/index.pdf.

Full text
Abstract:
Cementitious materials with strain-hardening property and high tensile ductility are promising materials on account of their mechanical and durability performances. These materials require special ingredients which make it costly to be used in conventional constructions. Hence, potential applications of Engineered Cementitious Composites (ECC) generally focus on layered systems or repairs which require the use of ECC together with another material. For it to be used especially as a repair material, it should have sufficient dimensional compatibility for preventing restrained shrinkage cracking. In this thesis, a strain-hardening fiberreinforced cementitious composite, named Engineered Cementitious Composites, was produced with local ingredients and their mechanical performance, dimensional stability properties were investigated. For investigating the effect of materials and mix proportions on mechanical properties, compressive strength, flexural strength with mid-span beam deflections and matrix fracture toughness tests were conducted. For determining the dimensional compatibility properties, autogenous, drying and restrained shrinkage tests were conducted along with tensile creep tests. As a result it was shown that, mechanical and dimensional stability properties are affected by the ingredients and mix proportions. It was shown that especially autogenous shrinkage of mixtures was relatively high which can cause early age cracking. In order to mitigate the adverse effect of autogenous shrinkage, the effect of pre-soaked expanded perlite aggregate replacement on mechanical, shrinkage and dimensional compatibility properties was investigated. As a result it was found out that autogenous shrinkage can be mitigated by the use of pre-soaked expanded perlite aggregate replacement.
APA, Harvard, Vancouver, ISO, and other styles
2

Raslan, M. S. "Three-dimensional stability of steel frameworks." Thesis, University of Southampton, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.379317.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wang, Mengjie. "Stability analysis of three-dimensional boundary layers with parabolized stability equations /." The Ohio State University, 1994. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487858106119026.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Nanri, Yasunori. "Dimensional stability of superheated steam dried paper." Thesis, McGill University, 1995. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=29768.

Full text
Abstract:
The dimensional stability of superheated steam dried paper made from groundwood, thermomechanical, chemithermomechanical and bleached kraft pulps were investigated in terms of hygroexpansivity, drying shrinkage and wet expansion. For all the pulps tested these characteristics of dimensional stability were found to be improved by high temperature superheated steam drying.
The hygroexpansion coefficient, the dimensional change relative to paper moisture content, was reduced about 15% by superheated steam drying at 320°C, compared to paper dried in low temperature air. Irreversible shrinkage was reduced by up to 30% for sheets dried in superheated steam. However, these effects on hygroexpansivity were caused mainly by the high drying temperature and the resulting high drying rate regardless of the drying fluid. Drying shrinkage and wet expansion as well were reduced by about 10% and 15% respectively for paper dried in superheated steam.
In superheated steam drying the elevated web temperature at the start of drying is believed to affect paper properties through thermal softening of the lignin and relaxation of drying and wet-pressing stresses. Increased fiber bonding with softened lignin accounts for both the increased elastic modulus and decreased light scattering coefficient observed. These were obtained only for sheets from mechanical pulps with initial moisture content of about 0.4 kg-water/kg-fiber or more, consistent with the mechanism of thermal softening of plasticized lignin. High sheet temperature in the falling rate period improves hygroscopicity of paper through reducing its equilibrium moisture content.
Superheated steam drying improves the dimensional stability of paper from such pulps, including less anisotropy, thereby enhancing paper quality.
APA, Harvard, Vancouver, ISO, and other styles
5

Navaranjan, N. "Modelling warp and dimensional stability in softwood." Thesis, University of Canterbury. Mechanical Engineering, 2002. http://hdl.handle.net/10092/7854.

Full text
Abstract:
Seasoned softwood board exposed to in-service moisture variations is subject to dimensional changes and distortions. In-service dimensional instability of a board is a critical issue since it causes serious problems in buildings and other engineering structures. This thesis presents research involving the development of numerical models to describe the in-service changes in dimension, at a board scale, for small variations in the moisture content. The models used input data defining the properties of the microstructural components that make up the cellular structure of the wood resulting in the cells having heterogeneous anisotropic properties. The application of full cyclic constraint to the boundaries of the elements that made up the representative volume element was investigated and used to determine the equivalent homogenised properties. A cellular model was developed to describe the behaviour of the wood as a function of density, microfibril angle, spiral grain angle and moisture content. The resultant finite element board models used a database generated from the cellular model to describe the dimensional changes associated with small in-service changes in moisture content. In conjunction with the development of this model the candidate carried out an experimental programme using a specific supplied pinus radiata log. The determination of the cellular shrinkage/swelling coefficients, using an experimental technique developed for this research, verified the accuracy of the homogenization method and its subsequent application to the cellular model. The results from the sawn boards were compared with the results from the finite element board models.
APA, Harvard, Vancouver, ISO, and other styles
6

OLIVEIRA, DENISE DE. "WEAK STABILITY FOR INFINITE DIMENSIONAL LINEAR SYSTEMS." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 1990. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=9384@1.

Full text
Abstract:
CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO
O objetivo deste trabalho é o estudo das condições para a estabilidade de sistemas lineares discretos de dimensão infinita invariantes no tempo, evoluindo em um espaço de Hilbert. Apresentaremos uma vasta coleção de resultados sobre estabilidade assintótica uniforme, incluindo uma condição espectral equivalente. Em relação à estabilidade assintótica fraca, analisaremos tanto a dificuldade de se estabelecer uma condição necessária e suficiente sobre o espectro do operador, como também sua relação com similaridade a contração. Por último, apresentaremos alguns resultados disponíveis sobre estabilidade assintótica forte para algumas classes específicas de operadores.
The purpose of this work is to analyse stability conditions for infinity-dimensional linear discrete systems operating in a Hilbert space. Whe shall present a wide collections of results on uniform asymptotic stability, incluiding an equivalent spectral condition. Concerning the weak asymptotic stability, we shall analyse the dificulty associated to the problem of attempting to establish a necessary and sufficient condition involving the spectral of the system operator. The relation between weak asymptotic stability and similarity to a contraction will be analysed as well. Finally, we shall present some of the available results concerning strong asymptotic stability for particular classes of operators.
APA, Harvard, Vancouver, ISO, and other styles
7

Punyamurthula, Sujan. "Three-dimensional analysis of waste impoundment stability /." Thesis, Connect to this title online; UW restricted, 1996. http://hdl.handle.net/1773/10210.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Lagnado, Ronald Robert Leal L. Gary. "The stability of two-dimensional linear flows /." Diss., Pasadena, Calif. : California Institute of Technology, 1985. http://resolver.caltech.edu/CaltechETD:etd-03272008-105253.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Tempelmann, David. "Stability and Receptivity of Three-Dimensional Boundary Layers." Licentiate thesis, KTH, Mechanics, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-11579.

Full text
Abstract:

The stability and the receptivity of three-dimensional flat plate boundary layers is studied employing parabolised stability equations. These allow for computationally efficient parametric studies. Two different sets of equations are used. The stability of modal disturbances in the form of crossflow vortices is studied by means of the well-known classical parabolised stability equations (PSE). A new method is developed which is applicable to more general vortical-type disturbances. It is based on a modified version of the classical PSE and describes both modal and non-modal growth in three-dimensional boundary layers. This modified PSE approach is used in conjunction with a Lagrange multiplier technique to compute spatial optimal disturbances in three-dimensional boundary layers. These take the form of streamwise oriented tilted vortices initially and develop into streaks further downstream. When entering the domain where modal disturbances become unstable optimal disturbances smoothly evolve into crossflow modes. It is found that non-modal growth is of significant magnitude in three-dimensional boundary layers. Both the lift-up and the Orr mechanism are identified as the physical mechanisms behind non-modal growth. Furthermore, the modified PSE are used to determine the response of three-dimensional boundary layers to vortical free-stream disturbances. By comparing to results from direct numerical simulations it is shown that the response, including initial transient behaviour, is described very accurately. Extensive parametric studies are performed where effects of free-stream turbulence are modelled by filtering with an energy spectrum characteristic for homogeneous isotropic turbulence. It is found that a quantitative prediction of the boundary layer response to free-stream turbulence requires detailed information about the incoming turbulent flow field. Finally, the adjoint of the classical PSE is used to determine the receptivity of modal disturbances with respect to localised surface roughness. It is shown that the adjoint approach yields perfect agreement with results from Finite-Reynold-Number Theory (FRNT) if the boundary layer is assumed to be locally parallel.  Receptivity is attenuated if nonlocal and non-parallel effects are accounted for. Comparisons to direct numerical simulations and extended parametric studies are presented.

APA, Harvard, Vancouver, ISO, and other styles
10

Hosseini, Seyed Mohammad. "Stability and transition of three-dimensional boundary layers." Licentiate thesis, KTH, Stabilitet, Transition, Kontroll, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-123175.

Full text
Abstract:
A focus has been put on the stability characteristics of different flow types existing on air vehicles. Flow passing over wings and different junctions on an aircraft face numerous local features, ranging from different pressure gradients, to interacting boundary layers. Primarily, stability characteristics of flow over a wing subject to negative pressure gradient is studied. The current numerical study conforms to an experimental study conducted by Saric and coworkers, in their Arizona State University wind tunnel experiments. Within that framework, a passive control mechanism has been tested to delay transition of flow from laminar to turbulence. The same control approach has been studied here, in addition to underling mechanisms playing major roles in flow transition, such as nonlinear effects and secondary instabilities. Another common three-dimensional flow feature arises as a result of streamlines passing through a junction, the so called corner-flow. For instance, this flow can be formed in the junction between the wing and fuselage on a plane. A series of direct numerical simulations using linear Navier-Stokes equations have been performed to determine the optimal initial perturbation. Optimal refers to a perturbation which can gain the maximum energy from the flow over a period of time. Power iterations between direct and adjoint Navier- Stokes equations determine the optimal initial perturbation. In other words this method seeks to determine the worst case scenario in terms of perturbation growth. Determining the optimal initial condition can help improve the design of such surfaces in addition to possible control mechanisms.

QC 20130604


RECEPT
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Dimensional stability"

1

Youngquist, John. Dimensional stability of acetylated aspen flakeboard. Madison, WI: Forest Products Laboratory, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Youngquist, John. Dimensional stability of acetylated aspen flakeboard. Madison, WI: Forest Products Laboratory, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mukunda, H. S. Two-dimensional stability of laminar flames. Hampton, Va: Langley Research Center, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Youngquist, John. Dimensional stability of acetylated aspen flakeboard. Madison, WI: Forest Products Laboratory, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mukunda, H. S. Two-dimensional stability of laminar flames. [Washington, DC]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Mukunda, H. S. Two-dimensional stability of laminar flames. [Washington, DC]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Rowell, Roger M. Water repellency and dimensional stability of wood. Madison, Wis: U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Rowell, Roger M. Water repellency and dimensional stability of wood. Madison, Wis: U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Rowell, Roger M. Water repellency and dimensional stability of wood. Madison, Wis: U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Gil, Michael I. Stability of finite and infinite dimensional systems. Boston: Kluwer Academic Publishers, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Dimensional stability"

1

Gooch, Jan W. "Dimensional Stability." In Encyclopedic Dictionary of Polymers, 225. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_3700.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Williamson, Heidi. "Dimensional Stability." In Practicing Sustainability, 31–32. New York, NY: Springer New York, 2012. http://dx.doi.org/10.1007/978-1-4614-4349-0_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Shi, Caijun, Zemei Wu, and Nemkumar Banthia. "Dimensional stability." In Ultra-High Performance Concrete, 203–67. London: CRC Press, 2024. http://dx.doi.org/10.1201/9781003203605-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Weik, Martin H. "dimensional stability." In Computer Science and Communications Dictionary, 416. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_5092.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Reddy, Hari C., P. K. Rojan, and George S. Moschytz. "Two-dimensional Hurwitz Polynomials." In Stability Theory, 75–85. Basel: Birkhäuser Basel, 1996. http://dx.doi.org/10.1007/978-3-0348-9208-7_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Öchsner, Andreas, and Markus Merkel. "Stability (Buckling)." In One-Dimensional Finite Elements, 313–25. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-31797-2_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Öchsner, Andreas, and Markus Merkel. "Stability-Buckling." In One-Dimensional Finite Elements, 307–18. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-75145-0_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Merkel, Markus, and Andreas Öchsner. "Stability (Buckling)." In One-Dimensional Finite Elements, 351–63. Berlin, Heidelberg: Springer Berlin Heidelberg, 2023. http://dx.doi.org/10.1007/978-3-662-66758-3_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Curtain, Ruth, and Hans Zwart. "Stability." In Introduction to Infinite-Dimensional Systems Theory, 151–86. New York, NY: Springer New York, 2020. http://dx.doi.org/10.1007/978-1-0716-0590-5_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Melo, Welington, and Sebastian Strien. "Structural Stability and Hyperbolicity." In One-Dimensional Dynamics, 201–66. Berlin, Heidelberg: Springer Berlin Heidelberg, 1993. http://dx.doi.org/10.1007/978-3-642-78043-1_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Dimensional stability"

1

Marschall, Charles W., Henry E. Hagy, and Roger A. Paquin. "Dimensional stability workshop." In San Dieg - DL Tentative, edited by Roger A. Paquin. SPIE, 1990. http://dx.doi.org/10.1117/12.22887.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Paquin, Roger A. "Dimensional stability: an overview." In San Dieg - DL Tentative, edited by Roger A. Paquin. SPIE, 1990. http://dx.doi.org/10.1117/12.22870.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Patterson, Steven R. "Dimensional stability of superinvar." In San Dieg - DL Tentative, edited by Roger A. Paquin. SPIE, 1990. http://dx.doi.org/10.1117/12.22880.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Paquin, R. A. "Processing for Dimensional Stability." In Optical Fabrication and Testing. Washington, D.C.: Optica Publishing Group, 1990. http://dx.doi.org/10.1364/oft.1980.mb10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Driscoll, Mark S., Jennifer L. Smith, Sean Woods, Kenneth J. Tiss, and L. Scott Larsen. "Dimensional stability of natural fibers." In APPLICATION OF ACCELERATORS IN RESEARCH AND INDUSTRY: Twenty-Second International Conference. AIP, 2013. http://dx.doi.org/10.1063/1.4802310.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hincapie, Diego, Cesar Restrepo, Herley Casanova, Jurgen Kreuzer, and Jorge Garcia-Sucerquia. "Colloidal Stability Evaluation via Digital In-line Holographic Microscopy." In Digital Holography and Three-Dimensional Imaging. Washington, D.C.: OSA, 2008. http://dx.doi.org/10.1364/dh.2008.dtuc7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Reed, Helen L., and Ray-Sing Lin. "Stability of Three-Dimensional Boundary Layers." In Aerospace Technology Conference and Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1987. http://dx.doi.org/10.4271/871857.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Czornik, Adam, and Michal Niezabitowski. "Stability of infinite-dimensional linear inclusions." In 2015 20th International Conference on Methods and Models in Automation and Robotics (MMAR ). IEEE, 2015. http://dx.doi.org/10.1109/mmar.2015.7283873.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hibbard, Douglas L. "Dimensional stability of electroless nickel coatings." In San Dieg - DL Tentative, edited by Roger A. Paquin. SPIE, 1990. http://dx.doi.org/10.1117/12.22875.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Doering, Charles R. "Convection, stability, and low dimensional dynamics." In Applied nonlinear dynamics and stochastic systems near the millenium. AIP, 1997. http://dx.doi.org/10.1063/1.54211.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Dimensional stability"

1

Rowell, Roger M., and W. Bart Banks. Water repellency and dimensional stability of wood. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, 1985. http://dx.doi.org/10.2737/fpl-gtr-50.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Herrnegger, F., P. Merkel, and J. L. Johnson. Comparison of two-dimensional and three-dimensional MHD equilibrium and stability codes. Office of Scientific and Technical Information (OSTI), February 1986. http://dx.doi.org/10.2172/6092121.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kimmel, Roger L., and J. Poggie. Three-Dimensional Hypersonic Boundary Layer Stability and Transition. Fort Belvoir, VA: Defense Technical Information Center, December 1997. http://dx.doi.org/10.21236/ada417303.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Solomon, A. A., and M. A. Dayananda. Dimensional, microstructural and compositional stability of metal fuels. Office of Scientific and Technical Information (OSTI), March 1993. http://dx.doi.org/10.2172/6640600.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Smith, Ernest R. Kaumalapau Harbor, Lanai, Hawaii, Two-Dimensional Breakwater Stability Study. Fort Belvoir, VA: Defense Technical Information Center, February 2001. http://dx.doi.org/10.21236/ada393221.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Buckmaster, John. The Structure and Stability of Three Dimensional Detonation Waves. Fort Belvoir, VA: Defense Technical Information Center, April 1990. http://dx.doi.org/10.21236/ada224465.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

LeGeros, J. P. Empirical Prediction of Dimensional Stability of Natural Uranium Fuel Elements. Office of Scientific and Technical Information (OSTI), February 2003. http://dx.doi.org/10.2172/808272.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ware, Andrew. EQUILIBRIUM, STABILITY, AND TRANSPORT STUDIES OF THREE-DIMENSIONAL CONFINEMENT DEVICES. Office of Scientific and Technical Information (OSTI), February 2023. http://dx.doi.org/10.2172/1923897.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Grinfeld, Michael, and Scott Schoenfeld. Stability of Robotic Path Tracking. Part I: One-Dimensional Scalar Models. Fort Belvoir, VA: Defense Technical Information Center, September 2005. http://dx.doi.org/10.21236/ada443463.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Solomon, A. A., and M. A. Dayananda. Dimensional, microstructural and compositional stability of metal fuels. Final performance report. Office of Scientific and Technical Information (OSTI), March 1993. http://dx.doi.org/10.2172/10136824.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Dimensional stability' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography