Relevant bibliographies by topics / Dimension measurement

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Dimension measurement'

Author: Grafiati
Published: 28 June 2021
Last updated: 10 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Dimension measurement.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Dimension measurement"

1

Leong, Kai'En, Henry Knipe, Simon Binny, Heather Pascoe, Nathan Better, Francesca Langenberg, Elaine Lui, and Subodh B. Joshi. "Aortic root measurement on CT: linear dimensions, aortic root area and comparison with echocardiography. A retrospective cross sectional study." British Journal of Radiology 94, no. 1121 (May 1, 2021): 20201232. http://dx.doi.org/10.1259/bjr.20201232.

Full text
Abstract:
Objective: We sought to assess the different CT aortic root measurements and determine their relationship to transthoracic echocardiography (TTE). Methods: TTE and ECG-gated CT images were reviewed from 70 consecutive patients (mean age 54 ± 18 years; 67% male) with tricuspid aortic roots (trileaflet aortic valves) between Nov 2009 and Dec 2013. Three CT planes (coronal, short axis en face and three-chamber) were used for measurement of nine linear dimensions. TTE aortic root dimension was measured as per guidelines from the parasternal long axis view. Results: All CT short axis measurements of the aortic root had excellent reproducibility (intraclass correlation coefficient, ICC 0.96–0.99), while coronal and three-chamber planes had lower reproducibility with ICC 0.90 (95% CI 0.84–0.94) and ICC 0.92 (0.87–0.95) respectively. CT coronal and short axis maximal dimensions were systematically larger than TTE (mean 2 mm larger, p < 0.001), while CT cusp to commissure measurements were systematically smaller (CT RCC-comm mean 2 mm smaller than TTE, p < 0.001). All CT short axis measurements had excellent correlation with aortic root area with CT short axis maximal dimension marginally better than the rest (Pearson’s R 0.97). Conclusion: Systematic differences exist between CT and TTE dependent on the CT plane of measurement. All CT short axis measurements of the aortic root had excellent reproducibility and correlation with aortic root area with maximal dimension appearing marginally better than the rest. Our findings highlight the importance of specifying the chosen plane of aortic root measurement on CT. Advances in knowledge: Systematic differences in aortic root dimension exist between TTE and the various CT measurement planes. CT coronal and short axis maximal dimensions were systematically larger than TTE, while CT cusp to commissure measurements were smaller. CT readers should indicate the plane of measurement and the specific linear dimension to avoid ambiguity in follow-up and comparison.
APA, Harvard, Vancouver, ISO, and other styles
2

Gershenfeld, Neil A. "Dimension measurement on high-dimensional systems." Physica D: Nonlinear Phenomena 55, no. 1-2 (February 1992): 135–54. http://dx.doi.org/10.1016/0167-2789(92)90193-q.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kakirde, Shubham, Shubham Jain, Swaraj Kaondal, Reena Sonkusare, and Rita Das. "Automated Dimension Measurement System." International Journal of Engineering and Advanced Technology 10, no. 5 (June 30, 2021): 163–69. http://dx.doi.org/10.35940/ijeat.d2399.0610521.

Full text
Abstract:
In this fast-paced world, it is inevitable that the manual labor employed in industries will be replaced by their automated counterparts. There are a number of existing solutions which deal with object dimensions estimation but only a few of them are suitable for deployment in the industry. The reason being the trade-off between the cost, time for processing, accuracy and system complexity. The proposed system aims to automate the mentioned tasks with the help of a single camera and a line laser module for each conveyor belt setup using laser triangulation method to measure the height and edge detection algorithm for measuring the length and breadth of the object. The minimal use of equipment makes the system simple, power and time efficient. The proposed system has an average error of around 3% in the dimension estimation.
APA, Harvard, Vancouver, ISO, and other styles
4

Pratama, Fandy Surya, Istianah Muslim, and Muhammad Ihsan Zul. "Digitalization of Human Head Anthropometry Measurement Using Pixels Measurement Method." IJITEE (International Journal of Information Technology and Electrical Engineering) 2, no. 3 (February 20, 2019): 63. http://dx.doi.org/10.22146/ijitee.43698.

Full text
Abstract:
Head Anthropometry is a part of anthropometry that needed to be measured carefully. It is because human head becomes an important part that necessary to be protected. The protection aims to look after the safety of the human head. Safety factors can be achieved by designing head products. Therefore, head anthropometry data is required to make a product design Currently, data retrieval of head anthropometry is still using several measuring devices such as anthropometers, sliding callipers, spreading callipers, and tape gauges. This measurement method makes the standard deviation become higher and also take a lot of time to capture huge amounts of anthropometry data. However, the problem has been resolved by other study research with building a head dimension measurement system using digital camera. But the system still need the integration with digital camera. This study uses the IP Camera that has been integrated with the system to capture human head from the front and side. The captured image is segmented into several areas based on head dimension. Then, the image is processed using pixel measurement method by performing feature extraction on each head dimension to get the result of head dimension measurement. The result shows that calliper measurement and system measurement against ten of fourteen human head anthropometry dimensions is identical with the best distance between IP Camera and the head as far as 200 cm. This head anthropometry data is expected to make a contribution to Indonesian Ergonomics Society.
APA, Harvard, Vancouver, ISO, and other styles
5

Benaissa, Bedr-Eddine, Fedoua Lahfa, Khatir Naima, Giulio Lorenzini, Mustafa Inc, and Younes Menni. "Detection and Cooperative Communications for Deployment Sensor Networks." Traitement du Signal 38, no. 3 (June 30, 2021): 555–64. http://dx.doi.org/10.18280/ts.380303.

Full text
Abstract:
In a sensor network, and more specifically with a single-hop deployment policy, sensor measurements contain a lot of redundancy either in the measurement dimensions of a single sensor, or between the measurement dimensions of different sensors due to of the spatial correlation either in the temporal dimension of the measurements. The goal is to reduce this redundancy by deploying fewer sensors, while ensuring high measurement accuracy and maximizing service life. The proposed method minimizes the complexity in terms of communication and calculation and maximizes the lifetime of the network based on an aggregation and consensus system to reduce the spatio-temporal dimension of the data captured and consequently the number of sensors deployed. The results show a visible performance compared to the standard method of transmission on the free platform of the COOJA/Contiki simulator allowing to simulate network connections of wireless sensors and to interact with them.
APA, Harvard, Vancouver, ISO, and other styles
6

Bagatell, Rochelle, Kieran McHugh, Arlene Naranjo, Collin Van Ryn, Chaim Kirby, Penelope Brock, Karen A. Lyons, et al. "Assessment of Primary Site Response in Children With High-Risk Neuroblastoma: An International Multicenter Study." Journal of Clinical Oncology 34, no. 7 (March 1, 2016): 740–46. http://dx.doi.org/10.1200/jco.2015.63.2042.

Full text
Abstract:
Purpose The International Neuroblastoma Response Criteria (INRC) require serial measurements of primary tumors in three dimensions, whereas the Response Evaluation Criteria in Solid Tumors (RECIST) require measurement in one dimension. This study was conducted to identify the preferred method of primary tumor response assessment for use in revised INRC. Patients and Methods Patients younger than 20 years with high-risk neuroblastoma were eligible if they were diagnosed between 2000 and 2012 and if three primary tumor measurements (antero-posterior, width, cranio-caudal) were recorded at least twice before resection. Responses were defined as ≥ 30% reduction in longest dimension as per RECIST, ≥ 50% reduction in volume as per INRC, or ≥ 65% reduction in volume. Results Three-year event-free survival for all patients (N = 229) was 44% and overall survival was 58%. The sensitivity of both volume response measures (ability to detect responses in patients who survived) exceeded the sensitivity of the single dimension measure, but the specificity of all response measures (ability to identify lack of response in patients who later died) was low. In multivariable analyses, none of the response measures studied was predictive of outcome, and none was predictive of the extent of resection. Conclusion None of the methods of primary tumor response assessment was predictive of outcome. Measurement of three dimensions followed by calculation of resultant volume is more complex than measurement of a single dimension. Primary tumor response in children with high-risk neuroblastoma should therefore be evaluated in accordance with RECIST criteria, using the single longest dimension.
APA, Harvard, Vancouver, ISO, and other styles
7

Stone, Mark H. "The Cubit: A History and Measurement Commentary." Journal of Anthropology 2014 (January 30, 2014): 1–11. http://dx.doi.org/10.1155/2014/489757.

Full text
Abstract:
Historical dimensions for the cubit are provided by scripture and pyramid documentation. Additional dimensions from the Middle East are found in other early documents. Two major dimensions emerge from a history of the cubit. The first is the anthropological or short cubit, and the second is the architectual or long cubit. The wide geographical area and long chronological period suggest that cubit dimensions varied over time and geographic area. Greek and Roman conquests led to standardization. More recent dimensions are provided from a study by Francis Galton based upon his investigations into anthropometry. The subjects for Galton’s study and those of several other investigators lacked adequate sample descriptions for producing a satisfactory cubit/forearm dimension. This finding is not surprising given the demise of the cubit in today’s world. Contemporary dimensions from military and civilian anthropometry for the forearm and hand allow comparison to the ancient unit. Although there appears no pressing need for a forearm-hand/cubit dimension, the half-yard or half-meter unit seems a useful one that could see more application.
APA, Harvard, Vancouver, ISO, and other styles
8

Rman, Milan, Marjan Brezovšek, and Janez Stare. "The Measurement Model of Professional Operation of State Administration." Central European Public Administration Review 18, no. 2 (November 30, 2020): 29–52. http://dx.doi.org/10.17573/cepar.2020.2.02.

Full text
Abstract:
This paper presents the study of a measurement model of professional operation of state administration. From the perspective of reliable performance of state functions, the professional operation of state administration represents one of the goals of social change. Based on theoretical-analytical findings, a measurement model of professional operation of state administration was designed. It consists of three dimensions, namely: reliability of state administration, professionalisation of the administrative profession, and competence of employees. The reliability dimension is represented by the element of legality and economic efficiency, the profession dimension is based on power, autonomy, knowledge and responsibility, and the competence dimension includes elements of leadership and ethics. The measurement model was tested in the Slovenian state administration. The results of the research confirm the connection between the three aforementioned dimensions of professional operation of state administration and, consequently, the validity of the designed model.
APA, Harvard, Vancouver, ISO, and other styles
9

OZONO, Shigeo. "Special Issue on Measurement of Large Scale Dimension. Measurement of Large Scale Dimensions." Journal of the Japan Society for Precision Engineering 58, no. 5 (1992): 749–50. http://dx.doi.org/10.2493/jjspe.58.749.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Zhang, Hongjun, Youliang Zhang, and Rui Zhang. "Dimension-Specific Efficiency Measurement Using Data Envelopment Analysis." Mathematical Problems in Engineering 2014 (2014): 1–9. http://dx.doi.org/10.1155/2014/247248.

Full text
Abstract:
Data envelopment analysis (DEA) is a powerful tool for evaluating and improving the performance of a set of decision-making units (DMUs). Empirically, there are usually many DMUs exhibiting “efficient” status in multi-input multioutput situations. However, it is not appropriate to assert that all efficient DMUs have equivalent performances. Actually, a DMU can be evaluated to be efficient as long as it performs best in a single dimension. This paper argues that an efficient DMU of a particular input-output proportion has its own specialty and may also perform poorly in some dimensions. Two DEA-based approaches are proposed to measure the dimension-specific efficiency of DMUs. One is measuring efficiency in multiplier-form by further processing the original multiplier DEA model. The other is calculating efficiency in envelopment-form by comparing with an ideal DMU. The proposed approaches are applied to 26 supermarkets in the city of Nanjing, China, which have provided new insights on efficiency for the managers.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Dimension measurement"

1

Shen, Wei. "Image based body dimension measurement /." View abstract or full-text, 2010. http://library.ust.hk/cgi/db/thesis.pl?MECH%202010%20SHEN.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Binnie, Iona B. "Critical dimension control : influencing factors and measurement." Thesis, University of Edinburgh, 1991. http://hdl.handle.net/1842/10815.

Full text
Abstract:
Advanced Lithography continues to be the limiting factor in the drive for higher levels of microcircuit integration. The key to the successful management of a lithography process is the integration of full measurement and instrumentation functions with the process, and the adoption of effective process control strategies. The aim of this research is to improve the understanding of critical dimension (CD) control by an investigation of the sources of variations in linewidth dimensions. Having identified the key factors, it should be possible to characterize and control their influence. Experimental analysis suggests that film thickness and photoresist thickness have a profound effect on linewidth dimensions. Simulation techniques are used to establish a theory which uses standing wave patterns within film stacks to predict reflectance and exposure threshold, as well as the dimensions of the developed resist images. This theory is later corroborated by measurements on test wafers. Having established the need to monitor film thickness variations, a novel metrology technique which incorporates both film thickness and linewidth uniformity measurements is introduced. The technique is based on the optical characteristics of a 'chequerboard' test pattern, consisting of clear and opaque squares. The chequerboard effectively enhances deviations in CD by translating changes in linewidth into an area change on the chequerboard. The technique was originally based on the measurement of light transmitted through glass wafers. The implementation of the technique using reflectance from silicon wafers is described, and possible future developments of the system are discussed.
APA, Harvard, Vancouver, ISO, and other styles
3

Rennell, Beverley. "The social dimension of chronic pain : problems of measurement." Thesis, London Metropolitan University, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.264707.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Davies, Guy Scott. "Critical dimension measurement and sidewall slope evaluation using a coherence probe microscope." Thesis, University of Edinburgh, 1994. http://hdl.handle.net/1842/13587.

Full text
Abstract:
The drive by the manufacturers and designers of integrated circuits towards smaller dimensions has led to ever increasing demands being placed on the vendors of semiconductor equipment. In the photolithography arena this has meant producing optical projection systems with improved resolution approaching 0.2μm and layer to layer registration to better than 50nm. In order to monitor these processes, metrology equipment must be capable of tracking changes in the above areas. Traditionally, optical techniques have been utilised for several reasons, namely their cost, high throughput and ease of use. The drive however, towards circuit dimensions which are equal to the wavelength of the illuminating light has reduced the appeal of optical tools to be used at these dimensions. The ability to get as close as possible to the theoretical limit is of benefit to the users and manufacturers of metrology equipment in that the useful life of optical metrology tools can be increased. This has been achieved by examining and implementing various new algorithms developed for the coherence probe microscope, the aim of which is to improve the measuring ability and extract more information from the complex signal that the microscope produces. Three areas have been examined, the first was the effect of a pathlength offset on the microscope, which moves the coherence region away from the focal plane of the objective lens. The results from this show a substantial improvement in the repeatability of the measurements from the bottom of trenches. The second area is that of profile extraction, in particular that of a photoresist profile after development. The ability to extract profile information from an optical tool is of great use to a lithography engineer as it negates the need to destructively cross section the sample. Thirdly, the area of general algorithms for measurement of critical dimensions has been investigated and several other schemes for measurement have been proposed.
APA, Harvard, Vancouver, ISO, and other styles
5

Doyle, Tim L. A. "Understanding the control strategies of quiet stance via a fractal dimension analysis of centre of pressure." Virtual Press, 2003. http://liblink.bsu.edu/uhtbin/catkey/1260622.

Full text
Abstract:
Certain natural phenomena have been identified as having fractal properties in their patterns. That is, their seemingly random patterns contain a level of order and deterministic properties that are more complex than previously thought. Centre of Pressure (COP) traces are one of these phenomena. By using a fractal dimension analysis of COP, it is possible that we can gain more information about control during quiet stance than traditional analyses have previously allowed. This Thesis considered a group of young healthy participants and a group of elderly healthy participants to compare traditional measures of COP (range and velocity of sway, and total excursion area) against a fractal dimension analysis of COP. Results indicated that both types of analyses are able to distinguish between eyes open and eyes closed in the elderly group. However, the fractal dimension analysis more accurately detects differences between the participant groups when standing with their eyes closed. Based on these results it is suggested that a fractal dimension analysis is more informative about posture control than traditional measures. Recommendations for future research include the development of model that incorporates non-linear properties of control and for further work investigating gait and balance from a dynamical systems perspective.
School of Physical Education
APA, Harvard, Vancouver, ISO, and other styles
6

Bodner, Sarah L. "Dimensional Assessment of Empowerment in Organizations." Thesis, University of North Texas, 2003. https://digital.library.unt.edu/ark:/67531/metadc4236/.

Full text
Abstract:
This research project was inspired by a survey that was designed to help an organization determine how well it was doing in its efforts to empower associates and achieve a goal of continuous improvement. Initial review of the survey created suspicion that the survey was not built around the appropriate dimensions to accurately measure the level of empowerment in organizations. As such, the survey was psychometrically analyzed to determine the validity of the instrument as a measure of empowerment. Additionally, an extensive review of the literature was performed to determine new dimensions that would most accurately measure empowerment. Eight dimensions (culture, trust, accountability, leadership, ability, commitment, responsibility, and communication) were put forth as the most appropriate to measure empowerment. Subject matter experts with knowledge and experience in the area of organizational empowerment reviewed the new dimensions for accuracy and fit with the original survey items.
APA, Harvard, Vancouver, ISO, and other styles
7

Dufloux, Laurent. "Dimension de Hausdorff des ensembles limites." Thesis, Sorbonne Paris Cité, 2015. http://www.theses.fr/2015USPCD022/document.

Full text
Abstract:
Soit G le groupe SO°(1, n) (n ≥ 3) ou PU(1, n) (n ≥ 2) et fixons une décomposition d'Iwasawa G = KAN. Soit ɼ un sous-groupe discret de G, que nous supposons Zariski-dense et de mesure de Bowen-Margulis-Sullivan finie. Lorsque G = SO°(1, n), nous étudions la géométrie de la mesure de Bowen-Margulis-Sullivan le long des sous-groupes fermés connexes de N, en lien avec la dichotomie de Mohammadi-Oh. Nous établissons des résultats déterministes sur la dimension des projections de la mesure de Patterson- Sullivan. Lorsque G = PU(1, n), nous relions la géométrie de la mesure de Bowen- Margulis-Sullivan le long du centre du groupe de Heisenberg au problème du calcul de la dimension de Hausdorff de l'ensemble limite relativement à la distance sphérique au bord. Nous calculons cette dimension pour certains groupes de Schottky
Let G be the group SO° (1,n) (n ≥ 3) or PU(1, n) (n ≥ 2) and fix some Iwasawa decomposition G = KAN. Let ɼ be a discrete subgroup of G.We assume that ɼ is Zariski-dense with finite Bowen-Margulis-Sullivan measure. When G = SO°(1,n), we investigate the geometry of the Bowen-Margulis-Sullivan measure elong connected closed subgroups of N. This is related to the Mohammadi-Oh dichotomy. We then prove deterministic results on the dimension of projections of Patterson-Sullivan measure. When G = PU(1,n), we relate the geometry of Bowen-Margulis-Sullivan measure along the center of Heisenberg group to the problem of computing the Hausdorff dimension of the limit set with respect to the spherical metric on the boudary. We construct some Schottky subgroups for wich we are able to compute this dimension
APA, Harvard, Vancouver, ISO, and other styles
8

Loo, James. "A proposed microwave system for on-line measurement of specific gravity and moisture content of dimension lumber." Thesis, University of British Columbia, 1987. http://hdl.handle.net/2429/26721.

Full text
Abstract:
A 10 GHz microwave bridge measurement system has been developed to automatically measure the electromagnetic field parameters transmitted through a dielectric material. These parameters are used to calculate the complex dielectric constant with the free-space transmission technique. The system is used to measure the field parameters transmitted through dimension lumber and a correlation is made with two strength determining factors of lumber: specific gravity and moisture content. Hemlock and Douglas Fir wood samples were tested and a grading technique was implemented. The system is capable of estimating the specific gravity to ±0.05 accuracy and the moisture content to ±3.0% accuracy.
Applied Science, Faculty of
Electrical and Computer Engineering, Department of
Graduate
APA, Harvard, Vancouver, ISO, and other styles
9

Liu, Zao. "Measurement of White Matter Structure Changes in Amyotrohpic Lateral Sclerosis Using Fractal Analysis." Cleveland State University / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=csu1315930636.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Herrera, Sabillon Beatriz Soledad [Verfasser], and Andrea [Akademischer Betreuer] Knierim. "Measurement of sustainability at farm-level : stakeholders perceptions and indicators of the social dimension / Beatriz Soledad Herrera Sabillon ; Betreuer: Andrea Knierim." Hohenheim : Kommunikations-, Informations- und Medienzentrum der Universität Hohenheim, 2020. http://d-nb.info/1219574147/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Dimension measurement"

1

Simpson, William Turner. Method for adjusting warp measurements to a different board dimension. Madison, WI (One Gifford Pinchot Dr., Madison 53705-2398): U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Particle size measurement. 5th ed. London: Chapman & Hall, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Allen, Terence. Particle size measurement. 4th ed. London: Chapman and Hall, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Measuring for results: The dimension of public library effectiveness. Westport, Conn: Libraries Unlimited, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Martens, David G. OPTIGRAMI: Optimum lumber grade mix program for hardwood dimension parts. [Broomall, Pa.]: U.S. Dept. of Agriculture, Forest Service, Northeastern Forest Experiment Station, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Martens, David G. OPTIGRAMI: Optimum lumber grade mix program for hardwood dimension parts. [Broomall, Pa.]: U.S. Dept. of Agriculture, Forest Service, Northeastern Forest Experiment Station, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

1943-, Brunner F. K., and Rizos C, eds. Developments in four-dimensional geodesy: Selected papers of the Ron S. Mather Symposium on Four-Dimensional Geodesy, Sydney, Australia, March 28-31, 1989. Berlin: Springer-Verlag, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Farago, Francis T. Handbook of dimensional measurement. 4th ed. New York: Industrial Press, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

1951-, Curtis Mark A., ed. Handbook of dimensional measurement. 3rd ed. New York, NY: Industrial Press, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kasprzak, Wacław. Measurements, dimensions, invariant models and fractals. Wrocław: "SPOLOM", 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Dimension measurement"

1

Takane, Yoshio, and Michael A. Hunter. "Dimension Reduction in Hierarchical Linear Models." In Measurement and Multivariate Analysis, 145–54. Tokyo: Springer Japan, 2002. http://dx.doi.org/10.1007/978-4-431-65955-6_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lemeš, Samir, and Anel Baručija. "Dimension Measurement of Injection Moulded Toybricks." In Lecture Notes in Networks and Systems, 57–64. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-90893-9_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wei, Zuo, Bin Zhang, and Pei Liu. "Object Dimension Measurement Based on Mask R-CNN." In Intelligent Robotics and Applications, 320–30. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-27538-9_27.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Derstine, M. W., F. A. Hopf, D. L. Kaplan, and M. H. Rose. "Measurement of Dimension of Chaos in Optical Bistability." In Springer Proceedings in Physics, 287–89. Berlin, Heidelberg: Springer Berlin Heidelberg, 1986. http://dx.doi.org/10.1007/978-3-642-46580-2_76.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Xiao, Gary Guishan. "Missing Dimension: Protein Turnover Rate Measurement in Gene Discovery." In Gene Discovery for Disease Models, 83–92. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9780470933947.ch5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wang, Jiannan, Hongbin Ma, and Baokui Li. "3-D Dimension Measurement of Workpiece Based on Binocular Vision." In Intelligent Robotics and Applications, 392–404. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-27532-7_35.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Rahimpour, Ebrahim, Vahid Rashtchi, and Reza Aghmashehr. "Dimension Estimation of Transformer Windings Based on Frequency Response Measurement." In Lecture Notes in Electrical Engineering, 1276–84. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-31676-1_119.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Cheng, Junyu, Joshua Matthews, and John Mitchell O’Toole. "Fluency: A Critically Important Yet Undervalued Dimension of L2 Vocabulary Knowledge." In Pacific Rim Objective Measurement Symposium (PROMS) 2014 Conference Proceedings, 99–114. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-47490-7_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Xiao, Jingting, Ruoyu Zhang, and Honglin Zhao. "Variable Dimension Measurement Matrix Construction for Compressive Sampling via m Sequence." In Machine Learning and Intelligent Communications, 221–30. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-73564-1_22.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Yang, Jun, Shi-jiao Zhu, and Zhong-qin Bi. "CMMB Image Sequences Measurement Based on Computation in High-Dimension Space." In Artificial Intelligence and Computational Intelligence, 521–29. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-33478-8_65.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Dimension measurement"

1

Yilmaz, Mustafa, and H. R. Ozcalik. "Dimension-measurement-based laser diffraction." In Measurement Technology and Intelligent Instruments, edited by Li Zhu. SPIE, 1993. http://dx.doi.org/10.1117/12.156471.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kaneko, Toshio, and Yoshihiro Todokoro. "Survey on pattern dimension measurement." In SPIE'S 1993 Symposium on Microlithography, edited by Michael T. Postek. SPIE, 1993. http://dx.doi.org/10.1117/12.148956.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mafla, Stalin. "Mutually Unbiased Bases on Hilbert Spaces of Composite Dimension." In QUANTUM COMMUNICATION, MEASUREMENT AND COMPUTING. AIP, 2004. http://dx.doi.org/10.1063/1.1834401.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Li Mingwei, Zhou Lei, and Yang Guangwei. "On Precise Photoelectric Measurement Device for Dimension." In 2007 Chinese Control Conference. IEEE, 2006. http://dx.doi.org/10.1109/chicc.2006.4347553.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Prathima, B. A., P. N. Sudha, and P. M. Suresh. "Electronic sensors for micron resolution dimension measurement." In 2017 International Conference on Electrical, Electronics, Communication, Computer, and Optimization Techniques (ICEECCOT). IEEE, 2017. http://dx.doi.org/10.1109/iceeccot.2017.8284528.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yuan Gao and Zili Deng. "Reduced dimension measurement fusion Kalman filtering algorithm." In 2010 Chinese Control and Decision Conference (CCDC). IEEE, 2010. http://dx.doi.org/10.1109/ccdc.2010.5498850.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Gao, Yuan, and Zili Deng. "Self-tuning reduced dimension measurement fusion Kalman filter." In 2010 8th World Congress on Intelligent Control and Automation (WCICA 2010). IEEE, 2010. http://dx.doi.org/10.1109/wcica.2010.5554238.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Burdett, Christine J., and Mita D. Desai. "Localized fractal dimension measurement in digital mammographic images." In Visual Communications '93, edited by Barry G. Haskell and Hsueh-Ming Hang. SPIE, 1993. http://dx.doi.org/10.1117/12.157903.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Greiff, Marcus, Anders Robertsson, and Karl Berntorp. "MSE-optimal measurement dimension reduction in Gaussian filtering." In 2020 IEEE Conference on Control Technology and Applications (CCTA). IEEE, 2020. http://dx.doi.org/10.1109/ccta41146.2020.9206162.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Aliahmad, Behzad, and Dinesh K. Kumar. "Adaptive Higuchi's dimension-based retinal vessel diameter measurement." In 2016 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC). IEEE, 2016. http://dx.doi.org/10.1109/embc.2016.7590947.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Dimension measurement"

1

Hernandez, M. Four Dimensional Trace Space Measurement. Office of Scientific and Technical Information (OSTI), February 2005. http://dx.doi.org/10.2172/839744.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Nieva, Veronica F., Edwin A. Fleishman, and Angela Rieck. Team Dimensions: Their Identity, Their Measurement and Their Relationships. Fort Belvoir, VA: Defense Technical Information Center, January 1985. http://dx.doi.org/10.21236/ada149662.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Simpson, William T., and John R. Shelly. Method for adjusting warp measurements to a different board dimension. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, 2000. http://dx.doi.org/10.2737/fpl-rn-273.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bertness, K. A. Dimensional measurement of nanostructures with scanning electron microscopy. Gaithersburg, MD: National Institute of Standards and Technology, September 2017. http://dx.doi.org/10.6028/nist.sp.250-96.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Long, Marshall B. Two- and Three-Dimensional Measurements in Flames. Fort Belvoir, VA: Defense Technical Information Center, August 1998. http://dx.doi.org/10.21236/ada353497.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Stallard, B. R., and S. Kaushik. Novel near-field optical probe for 100-nm critical dimension measurements. Office of Scientific and Technical Information (OSTI), June 1997. http://dx.doi.org/10.2172/486169.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Karkkainen, Ryan L., Paul Moy, and Jerome T. Tzeng. Through-Thickness Property Measurement of Three-Dimensional Textile Composites. Fort Belvoir, VA: Defense Technical Information Center, April 2009. http://dx.doi.org/10.21236/ada499568.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Carson, J. A., E. Barczak, R. Bossert, E. Fisk, P. Mantsch, R. Riley, E. E. Schmidt, and E. E. Jr Schmidt. A device for precision dimensional measurement of superconducting cable. Office of Scientific and Technical Information (OSTI), May 1986. http://dx.doi.org/10.2172/6900129.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Swyt, Dennis A. New concepts of precision dimensional measurement for modern manufacturing. Gaithersburg, MD: National Institute of Standards and Technology, 1991. http://dx.doi.org/10.6028/nist.ir.4644.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Schneberk, D., and W. Brown. Dimensional Measurements of Three Tubes by Computed Tomography. Office of Scientific and Technical Information (OSTI), October 2004. http://dx.doi.org/10.2172/15014597.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Dimension measurement' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography