Dissertations / Theses on the topic 'Dielectric penetration'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 16 dissertations / theses for your research on the topic 'Dielectric penetration.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
Blandin, Christopher. "Production of dielectric materials." Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/26568.
Full textCommittee Chair: Colton, Jonathan; Committee Member: Schultz, John; Committee Member: Zhou, Min. Part of the SMARTech Electronic Thesis and Dissertation Collection.
Браге, Ксенія Сергіївна. "Метод вимірювання НВЧ- параметрів матеріалів на основі тонкого діелектричного резонатора." Master's thesis, Київ, 2018. https://ela.kpi.ua/handle/123456789/22979.
Full textIn the given work, the nutritional pockets of the teoretical publications are stored in those thin dielectric resonators and the method of determining the NVH parameters in the power electronics. The method of a thin dielectric resonator is applied to the result of the experimental data. When study slim dielectric films arise difficulties, to that method do not gave accuracy. When the method of thin plots is used, the results have been shown, when the basic resonator is changed, the accuracy is determined. To the method of robotics is adaptation to the method of the stored dielectric resonator for the parameterization of thin cells. For achivment it's delivered goal it was necessary to solve the problem: 1. Analyze existing methods 2. Analyze power of a thin dielectric resonator (TDR). 3.Propose method of study parameters in the small films on the basis of the TDR. 4. Experimentally check method of thin plvok on the basis of the TDR. The subject і objective of this work is: Ob'ekt: thin dielectric resonator Subject: Electrodynamic power of a thin dielectric resonator Science novelty: Theoretically, this experiment is complementary to the electric-dynamical authorities of the TDR, but on the basis of the TDR, it is possible to obtain the accuracy of the NVCH - the power of subtle electrical add-ons.
Quevedo-Lopez, Manuel Angel. "Materials properties of hafnium and zirconium silicates: Metal interdiffusion and dopant penetration studies." Thesis, University of North Texas, 2002. https://digital.library.unt.edu/ark:/67531/metadc3221/.
Full textDoria, Katerin Guerrero. "Desenvolvimento de uma sonda TDR helicoidal para uso em conjunto com o ensaio CPT." Universidade de São Paulo, 2015. http://www.teses.usp.br/teses/disponiveis/18/18132/tde-06012016-094209/.
Full textThe time domain reflectometry allows estimating the moisture content of a medium by means of its correlation with the dielectric constant. A coil TDR probe, which can be driven into the ground together with others in situ penetration tests, can be used to estimate the moisture content at different depths. It is an interesting approach for geotechnical site characterization. In this work, a coil TDR probe was adapted and used in combination with the CPT test for the site characterization of an unsaturated sandy soil profile which occurs in the region of Bauru (SP). The probe calibration was performed in laboratory specifically for that soil. The calibration equation, which presented the best results, were defined correlating the dielectric constant, electrical conductivity and dry density with the moisture content. In order to improve the accuracy for determining the water content in the field and to eliminate possible interference on the electromagnetic wave registration, modifications were made in some characteristics of the original design of this probe. Such modifications consisted in separating the conductive electrodes from the metal parts of the probe, and eliminating the coaxial extension cable, connecting the probe directly to a coaxial cable 12 m long. Such changes have led to a significant improvement in the determination of the moisture content profile of the studied site. The moisture content values determined in situ by using the TDR along 8 m depth were compared with reference values obtained from disturbed soil samples collected using mechanical augers. The root mean square error of the gravimetric water content profile using the TDR coil probe was 1.61% in the last test campaign. The results of this research indicate that this tool is suitable to estimate the gravimetric moisture content together with the CPT test.
Evans, Robert D. "Optimising ground penetrating radar (GPR) to assess pavements." Thesis, Loughborough University, 2010. https://dspace.lboro.ac.uk/2134/20465.
Full textLoulizi, Amara. "Development of Ground Penetrating Radar Signal Modeling and Implementation for Transportation Infrastructure." Diss., Virginia Tech, 2001. http://hdl.handle.net/10919/26133.
Full textPh. D.
Рудяк, Юрій Аронович, Юрий Аронович Рудяк, and Yu А. Rudyak. "Оптичні експериментально-розрахункові методи визначення напружено-деформованого та граничного станів прозорих діелектриків." Thesis, Тернопільський національний технічний університет ім. Івана Пулюя, 2015. http://elartu.tntu.edu.ua/handle/123456789/5827.
Full textДисертаційна робота присвячена розв’язанню наукової проблеми – підвищення ефективності та функціональних можливостей експериментальних досліджень шляхом розробки експериментально-розрахункових оптичних методів визначення напружено-деформованого та граничного стану прозорих діелектриків на основі аналізу параметрів тензора діелектричної проникності. Теоретично обґрунтовано та експериментально підтверджено новий метод визначення НДС, який використовує п’єзооптичний ефект поглинаючого середовища (метод поглинання – МП), одержано формули визначення КІН за даними МП. Теоретично обґрунтовано та експериментально підтверджено новий метод визначення НДС, який базується на ефекті дифузного поверхневого розсіювання (МДПР), одержано формули визначення КІН (моментів) за допомогою даного методу, а також сумісним вимірюванням даних МДПР та фотопружності. Розроблено та реалізовано модель оптичного тензодатчика, який працює на основі МДПР, обґрунтовано застосування методу для оцінки «зони шийкоутворення» біля вершини тріщини. Розвинуто поляризаційно-оптичний метод для розв’язання таких задач експериментальної механіки руйнування, як визначення КІН КІ, КІІ, КІІІ, для неоднорідного основного напруженого стану та малих за величиною (до ) картин оптичної анізотропії, для випадків великих різниць оптичного ходу ( ) та значних градієнтів, коли важко визначити нульову ізохрому. Розроблено фізико-механічний критерій граничного стану діелектриків (критерій тензора діелектричної проникності - ТДП), експериментально досліджено, згідно критерію ТДП, граничний стан пластин з оргскла та оболонок з епоксидної смоли з тріщинами. За допомогою модифікованих методик поляризаційно-оптичного методу та розробленого фізико-механічного критерію ТДП проведено комплексне дослідження напруженого та граничного станів багатошарових структур (триплексів) при температурі Т=213 К і при можливій наявності тріщиноподібних дефектів у їх складових частинах (елементах).
Диссертационная работа посвящена решению научной проблемы –повышению эффективности и функциональных возможностей экспериментальных исследований путем разработки экспериментально-расчетных оптических методов определения напряженно-деформированного и предельного состояния прозрачных диэлектриков на основе анализа параметров тензора диэлектрической проницаемости. Теоретически обоснован и экспериментально подтвержден метод определения НДС, который использует пьезооптический эффект поглощающей среды (метод поглощения - МП), действие которого основано на анализе величин изменения мнимой части компонент тензора диэлектрической проницаемости (ТДП) при нагружении объекта. Метод предоставляет принципиальную возможность определения НДС объектов, изготовленных из непрозрачных в видимом диапазоне диэлектриков и позволяет определять сразу отдельно квазиглавные напряжения и деформации, а не их линейные комбинации, как в поляризационно-оптических (разности) и когерентно-оптических (суммы) методах. Предложенный метод поглощения применен для определения величин КИН при исследовании объектов, содержащих трещиноподобные дефекты (получены формулы определения КИН по данным МП). Теоретически обоснован и экспериментально подтвержден метод определения НДС, который использует эффект диффузного поверхностного рассеивания (метод диффузного поверхностного рассеивания – МДПР). Предложенный метод основывается на измерениях перераспределения интенсивностей зеркальной и диффузных составляющих рассеянного поверхностью объекта светового потока при локальном изменении ее кривизны. Метод позволяет проводить измерения в широком диапазоне изменения величин деформаций: от порогового значения чувствительности до разрушения объектов (10-2 – для полимеров, 10-0- для эластомеров), значительно превышая диапазон измерения спекл-интерферометрии. Получены формулы определения КИН (моментов) по данным МДПР для симметричного относительно берегов трещины моментного состояния (определения К3) и несимметричного моментного состояния (определения К3 и К4). Разработаны и реализованы модели оптических датчиков деформаций, которые работают на эффекте диффузного поверхностного рассеивания (датчики МДПР). Чувствительным элементом датчика первого конструктивного исполнения является изогнутая пластинка, а второго – выемка с диффузнорассеивающей поверхностью. Датчик МДПР, чувствительным элементом которого является выемка, не крепится определенным образом на поверхности объекта, а является частью приповерхностного слоя. Такая конструкция позволяет повысить точность измерений за счет отсутствия погрешностей в системе “датчик–склеивающий слой–поверхность объекта”. Предложен физико-механический критерий предельного состояния диэлектриков (критерий тензора диэлектрической проницаемости – ТДП). Критерий основывается на изменении компонент тензора диэлектрической проницаемости при нагружении объекта и позволяет интегрально учитывать влияние как механических, так и физических факторов (температуры, влажности, радиации) на предельное состояние диэлектриков. В данном критерии при изменении физических факторов изменяется не только предел прочности (как в классических механических теориях), а и выражение для эквивалентного напряжения за счет изменения величины соотношения оптико-механических констант С1/С2. Предложенный критерий ТДП позволяет определять долговременную прочность полимеров при постоянной нагрузке. Модифицирован поляризационно-оптический метод исследования натурных объектов с трещинами для малых по величине (до 1λ, где λ – длина волны зондирующего излучения) картин оптической анизотропии и для случаев больших разностей оптического хода (>8 λ) и значительных градиентов, при которых сложно определить нулевую изохрому. Исследована кинетика разрушения и предельное состояние неорганического силикатного стекла (как составной части гомогенных и гетерогенных триплексов). Проанализированы, при помощи критерия ТДП, данные разрушения пластин из органического стекла (как составной части гетерогенных триплексов) с краевыми трещинами. На моделях из эпоксидных смол ЭПСА и ЭД-20М показано конструкционное и технологическое влияние обрамления на распределение величин КИН при прорастании поверхностных трещин (надрезов) в сквозные в склеивающем слое триплексов. С помощью модифицированных методик поляризационно-оптического метода и разработанного физико-механического критерия ТДП проведено комплексное исследование напряженного и предельного состояния гомогенных и гетерогенных триплексов при сниженных температурах (до Т=213 К), с обрамлением и без, при возможном наличии трещиноподобных дефектов в их составных частях (элементах): неорганическом силикатном стекле, органическом стекле и склеивающем слое. Это позволило определить влияние гетерогенности и обрамления, а также получить численные результаты оценки НДС и предельного состояния для различных вариантов триплексов и выбрать оптимальный: гетерогенный триплекс без обрамления.
Thesis is dedicated to the solution of a scientific problem – developing of the optical experimental and computational methods for determining the stress-strain and limit states of transparent dielectrics on the basis of the analysis of the dielectric penetration tensor. The author theoretically justified and experimentally confirmed the new method for determining the SDS, that uses the piezooptic effect of absorbing environment (the absorption method – AM), obtained the formulae for finding SIF accord Кing to the data of the AM. The author theoretically justified and experimentally confirmed a new method for determining the SDS on the basis of the method of diffuse surface scattering (MDSS), obtained the formulae for finding SIF with help of this method and due to the joint estimation of data of the MDSS and photo resilience as well. The author developed and realized the model of optical strain gauge that works on the basis of the MDSS, the application of the method for estimation of “neck-like formation area” at the crack tip. The author developed the polarized and optical method for solution of such tasks of experimental mechanics of destruction like SIF F1 F2 F3 in the case of finding heterogeneous stress state and the small size (<1λ) pictures of optical anisotropy in the case of significant optical motion’s differences (>8λ) and significant gradients when it is difficult to determine the zero isochromat. The author developed the physical-mechanical criterion of boundary state of dielectrics (the criterion of dielectric penetration tensor (DPT)) and experimentally investigated according to the criterion of DPT the boundary state of the organic glass plates and epoxy resin’s casing with cracks. Due to the modified polarized and optical method and developed physical-mechanical criterion of DPT was conducted the complex study of stress and boundary states of multilayer structures (triplexes) with the temperature T= 213 K and with the possible availability of crack-like defects in their component parts (elements).
Birch, Max (Max Lariviere). "Development of a cavity backed bowtie antenna with dielectric matching for ground penetrating radar." Thesis, Stellenbosch : Stellenbosch University, 2001. http://hdl.handle.net/10019.1/52186.
Full textENGLISH ABSTRACT: An antenna for ground level deployed Ground Penetrating Radar applications is presented. The antenna is matched to the ground via a low impedance dielectric matching section improving the radiation pattern and input impedance characteristics. A bowtie antenna was used for the design with the edges rounded to stabilize the resonant frequency. The radiation pattern was focused to the one side of the antenna for ground penetration using a non-absorptive metallic cylindrical air filled cavity. Edge reflections from the antenna were reduced by means of discrete resistor terminations between the antenna and the cavity. A wire equivalent of the solid metallic antenna was investigated giving similar characteristics to that of the solid antenna. The radiation pattern deformation arising from transmitting a wave from an antenna in air into the ground due to the impedance mismatch was investigated. This was overcome with the use of a polypropylene dielectric slab inserted between the antenna and the ground. Together with improving the radiation pattern the antenna was less sensitive to ground parameter variations and to an air gap introduced between the slab and the ground. This was implemented as a wheel mounted system with adjustable height settings depending on the terrain. A pair of mounted antennas was constructed to be tested on an existing bistatic Stepped Frequency Continuous Wave radar operating in the 50-400 MHz band developed by the University of Cape Town. This antenna is seen as providing a solution to the problem of coupling an antenna to a low wave impedance medium such as ground.
AFRIKAANSE OPSOMMING: 'n Antenne word vir Grond Penetrerende Radar toepassings voorgestel. Dit is spesifiek ontwikkel vir oppervlak ontplooide stelsels ontwerp. Die antenne is aangepas tot die grond deur middel van 'n diëlektriese aanpassingseksie wat die starlingspatroon en intree-impedansie karakteristieke verbeter. Die antenne is tot die grond toe aangepas deur middel van 'n diëlektriese aanpassingseksie wat die starlingspatroon en intree-impedansie karakteristieke verbeter. 'n Strikdas antenne was gebruik vir die ontwerp, met die kante gerond om die resonante freqwensie te stabiliseer. Om die stralingspatroon van die antenne na een kant toe te fokus was 'n nie-absorbeerede metaleiese, luggevulde, silindriese holte daaragter geplaas om die energie vorentoe te weerkaats. Weerkaatsings van die rand van die antenne word onderdruk met behulp van koppelende weerstande tussen die antenne en die holte. A draad ekwivalent van die antenne was ook ondersoek met goeie ooreenstemming met die soliede strikdas. Die impedansie wanaanpassing wat ontstaan as 'n antenne wat in lug is, in die grond in straal veroorsaak dat die stralingspatroon van die antenne vervorm word. Dit was gevind dat deur 'n aanpassings blad van 'n diëlektriese materiaal, naamlik polipropileen, gebruik te maak tussen die antenne en die grond dat dit die probleem oplos. Saam met dit was gevind dat die antenne minder sensitief was vir veranderings in grondparameters en ook vir 'n lug gaping tussen die blad en die grond. Die het gemaak dat die antenne op wiele gemonteer kon word met verstelbare hoogte afhangend van die terrein. 'n Stel geskaleerde antennes was gemaak om op 'n beskikbare bistatiese Trap Frekwensie Kontinue Golf radar te werk. Dit werk oor die 50-400 MHz band en was ontwikkel deur die Universitiet van Kaapstad. Die antenne word gesien as 'n oplossing vir antenne koppelingsprobleme ondervind by laë golf impedansie materiale.
Reichmann, Markus. "Auslegung von Mikrowellen-Thermoprozess-Anlagen unter Nutzung von hochfrequenz-technischen Prinzipien." Doctoral thesis, Technische Universitaet Bergakademie Freiberg Universitaetsbibliothek "Georgius Agricola", 2011. http://nbn-resolving.de/urn:nbn:de:bsz:105-qucosa-67409.
Full textLahouar, Samer. "Development of Data Analysis Algorithms for Interpretation of Ground Penetrating Radar Data." Diss., Virginia Tech, 2003. http://hdl.handle.net/10919/11051.
Full textPh. D.
Saarenketo, T. (Timo). "Electrical properties of road materials and subgrade soils and the use of Ground Penetrating Radar in traffic infrastructure surveys." Doctoral thesis, University of Oulu, 2006. http://urn.fi/urn:isbn:9514282221.
Full textBohleber, Pascal [Verfasser], and Olaf [Akademischer Betreuer] Eisen. "Ground-penetrating radar assisted ice core research : The challenge of Alpine glaciers and dielectric ice properties / Pascal Bohleber ; Betreuer: Olaf Eisen." Heidelberg : Universitätsbibliothek Heidelberg, 2011. http://d-nb.info/117978278X/34.
Full textAraujo, Steven. "Evaluation de la compacité des enrobés bitumineux et caractérisation large bande des propriétés diélectriques des roches." Thesis, Normandie, 2017. http://www.theses.fr/2017NORMR039/document.
Full textThe control of new paved road is primordial to ensure its quality as well as its lifetime. Thus, several physical properties need to be well calibrated and controlled in order to avoid early degradations and safety issues for the drivers. Furthermore, the coast associated to the road building and the road maintenance is significant which makes the implementation of asphalt pavement according to the standard even more important. Among the properties that need attentions, the compactness which is indicative of the air void concentration in the asphalt pavement is the one we are interested in. Currently, only two methods in laboratory (in Europe) are considered as standards to assess the compactness. Nevertheless, these techniques are either nuclear or destructive which is a major hindrance. In the past two decades, new electromagnetic (EM) techniques have emerged and proved their great utility for geophysics or civil engineering applications and more importantly for the compactness assessment. However, these non-destructive and non-nuclear methods require many special precautions for the compactness assessment. First of all, they allow to measure the dielectric permittivity of the investigated material. Then to figure out the compactness, the use of EM mixing models is required. This leads to the accurate knowledge of every components constituting the asphalt pavement and their related properties (density and permittivity). The first main part of this work spotlights the relevance of using a step frequency radar for the compactness assessment. The study of several EM mixing models is performed to select the most appropriate ones. Nowadays, one of the challenges to address for these techniques is that the use of recycled materials is more and more commonly implemented for new roads building. Indeed, as the knowledge of the component properties is required, this makes the compactness assessment even more difficult. As a consequence, several methods have been developed and are proposed to assess the compactness of a new paved highway containing recycled asphalt pavement. The second main part of this research is the dielectric characterization of many rocks which are the main component of the asphalt pavement. This characterization is validated from low to high frequencies and also as a function of the temperature. The results show at high frequency that the permittivity is mainly dependent on the density and the chemical composition of the rock. However, as the frequency decreases and the temperature varies, this is not longer true and additional phenomena appear and drastically change the dielectric behavior of the rock. Also, it has been shown that the water plays a major role on the dielectric behavior at low frequency. This phenomena are reflected partially by small variations at "high frequency" that could explained the deviations obtained for capacitive techniques which work in the MHz region and which are used also for the compactness assessment
Faria, Sandro Henrique de. "O uso do georadar na determinação de parâmetros da estrutura de pavimentos flexíveis." Universidade Federal de Viçosa, 2010. http://locus.ufv.br/handle/123456789/3721.
Full textThis paper aims to analyze the Ground Penetrating RADAR as tool in the determination of the thickness of the layers of the flexible road pavement of automatic way and the density of the asphalt layer supported by integrated testing of GPR and geotechnical data. The first experiment was conducted at the Presidente Dutra highway (BR116), Pirai - RJ, while the data for the second experiment were obtained from the BR040 highway, Sete Lagoas - MG. In order to achieve the objectives of this study, two methodologies were developed: the first one, directed to the identification of the thicknesses of the layers of flexible pavements of automated way; the second one, focused on determining the density of the layer of asphalt surfaces. The first methodology showed promising results, once it presented good classification results for the classes 1 (off-set) and 3 (macadam), however, was confusion between the "blocks" classified for the classes 2 (asphalt) and 4 (subgrade). A possible alternative, for improvement, would be: to use other texture extractor of the wavelet transform family; to use another type of interpolation, using a that better represents the trends of the coefficients to be generated the surface; to increase the number of training and testing samples, or even to use another type of classifier, such as Artificial Neural Networks. However, this is a field that is worth being investigated more deeply, since the results proved to be significant. The second methodology, regarding the correlation of the density of the asphalt layer through the dielectric value, measured by means an ground coupled antenna, of 1,6GHz, using the technique of the reflection, it presented satisfactory values in spite of the few sampling points, showing to be a good alternative to determine indirectly the density of the asphalt layer and for future works in the area.
Este trabalho tem o propósito de analisar o desempenho do RADAR de penetração no solo como ferramenta na determinação das espessuras das camadas do pavimento rodoviário flexível de maneira automática e a densidade da camada de revestimento apoiado em testes integrados de GPR e dados geotécnicos. O primeiro experimento foi realizado na rodovia Presidente Dutra (BR116), município de Piraí - RJ, em quanto os dados para o segundo experimento foram obtidos na rodovia BR040, município de Sete Lagoas - MG. Para atingir os objetivos do trabalho foram elaboradas duas metodologias: a primeira delas, direcionada à identificação das espessuras das camadas de pavimentos flexíveis de modo automatizado; a segunda, voltada para a determinação da densidade da camada de revestimento asfáltico. A primeira metodologia apresentou, de uma maneira geral, resultados promissores, uma vez que foram bons os resultados de classificação para as classes 1 (off-set) e 3 (macadame), no entanto, houve confusão entre os “blocos” classificados para as classes 2 (revestimento) e 4 (subleito). Uma possível alternativa para a melhoria dos resultados seria mudar o extrator de textura utilizado (transformada wavelet), valeria apena testar outros extratores da família wavelet; outra opção seria utilizar outro tipo de interpolador, usando um que pegue mais as tendências dos coeficientes ao se gerar a superfície; também seria interessante aumentar o número de amostras de treinamento e teste, ou até mesmo, utilizar outro tipo de classificador, como por exemplo, Redes Neurais Artificiais. Todavia, esse é um campo que vale ser pesquisado mais profundamente, uma vez que os resultados alcançados se mostraram esperançosos. A segunda metodologia, referente à correlação da densidade da camada de revestimento através do valor dielétrico, medido por meio de uma antena de contato no solo, de 1,6 GHz, utilizando a técnica da reflexão, apresentou valores satisfatórios apesar dos poucos pontos amostrados, mostrando ser uma boa escolha para se determinar a densidade da camada de revestimento de maneira indireta e para trabalhos futuros na área.
XU, JIN-LIAN, and 徐錦蓮. "Penetrative scattering field analysis of a metal strip covered by dielectric layors." Thesis, 1991. http://ndltd.ncl.edu.tw/handle/46877105765990780085.
Full textReichmann, Markus. "Auslegung von Mikrowellen-Thermoprozess-Anlagen unter Nutzung von hochfrequenz-technischen Prinzipien: am Beispiel eines Entbinderungsofens für keramische Grünkörper." Doctoral thesis, 2010. https://tubaf.qucosa.de/id/qucosa%3A22757.
Full text