Academic literature on the topic 'Développement et validation d’échelle'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Développement et validation d’échelle.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Développement et validation d’échelle":
Simar, Carine, Julie Pironom, Damien Tessier, Christelle Nsambu, and Julien Masson. "Validation transculturelle d’une échelle de mesure des compétences sociales chez les élèves des 8 à 12 ans." Revue Education, Santé, Sociétés, Vol. 7, No. 1, Volume 7, Numéro 1 (November 30, 2020): 125–39. http://dx.doi.org/10.17184/eac.3865.
Lubis, Nuriaty Prasetya, Junita Friska, and Zulherman Zulherman. "Développement De La Méthode De Français Basé Sur Google Classroom En Classe XI Au SMA Negeri 21 Medan." HEXAGONE Jurnal Pendidikan, Linguistik, Budaya dan Sastra Perancis 10, no. 2 (December 29, 2021): 34. http://dx.doi.org/10.24114/hxg.v10i2.30299.
Coulibaly, Boubacar, and Farzaneh Pahlavan. "Développement et validation d'un questionnaire de la prise de décision dans le champ d'assurance." Article professionnel 88, no. 1-2 (October 19, 2021): 91–114. http://dx.doi.org/10.7202/1082606ar.
Vézina, Michel, and Jacques Fortin. "Les facteurs de succès de la mise en place d’une communauté virtuelle dans les PME de services : le cas des petits et moyens cabinets d’experts-comptables." Revue internationale P.M.E. 15, no. 3-4 (February 16, 2012): 63–99. http://dx.doi.org/10.7202/1008813ar.
Rioux, Rémy, and Jean-David Naudet. "Développement et lutte contre la pauvreté : de la réconciliation au changement d’échelle." Politique étrangère Printemps, no. 1 (February 15, 2021): 65–75. http://dx.doi.org/10.3917/pe.211.0065.
Gaille, Marie, Marco Araneda, Clément Dubost, Clémence Guillermain, Sarah Kaakai, Élise Ricadat, Nicolas Todd, and Michael Rera. "Conséquences éthiques et sociales de biomarqueurs prédictifs de la mort chez l’homme." médecine/sciences 36, no. 12 (December 2020): 1199–206. http://dx.doi.org/10.1051/medsci/2020228.
MEZILI, Imad, and Abdelkader DERBAL. "La problématique de l’application des réformes environnementales au sein du système commercial multilatéral." Dirassat Journal Economic Issue 8, no. 2 (March 1, 2017): 333–45. http://dx.doi.org/10.34118/djei.v8i2.269.
Rosier, Michel. "Le modèle de reproduction et d’accumulation d’A. Smith." Recherches économiques de Louvain 53, no. 2 (June 1987): 167–90. http://dx.doi.org/10.1017/s0770451800083123.
Brenner, Sylvie, and Hervé Breyton. "La dématérialisation de la commande publique : la DGFiP facteur d’économies d’échelle." Gestion & Finances Publiques, no. 3 (May 2019): 89–93. http://dx.doi.org/10.3166/gfp.2019.3.011.
Robert, Jean-Claude. "L’histoire environnementale et l’historiographie du Québec." Globe 9, no. 1 (February 15, 2011): 237–55. http://dx.doi.org/10.7202/1000804ar.
Dissertations / Theses on the topic "Développement et validation d’échelle":
Chapaux-Morelli, Pascale. "La dissonance identitaire au travail : développement théorique et demarche operationnelle par une approche mixed-method." Electronic Thesis or Diss., Paris 8, 2020. http://www.theses.fr/2020PA080006.
Considering the increasing interest in identity issues, identity dissonance at work is becoming a major issue. It is a severe psychological discomfort as a result of a conscious discrepancy experienced by the individual between actual self and ought self, at the workplace. After a presentation of the historical aspects of identity and on the basis of Higgins’ Self-Discrepancy Theory, we developed an instrument of measurement through an inductive approach, given the lack of specific literature. The construction of the IDS-Work resulted in an independent two-dimensional structure for a total of eleven items. The latitude of expressive identity measures the degree by which the individual expresses his/her personality and identity at work, and normative pressure measures the degree of perceived constraints at an identity level. We then analyzed the effects of identity dissonance on occupational health processes, and realized a qualitative study, in which dissonance is seen as a lever for evolution. The results of such studies have allowed: to highlight the direct effect of identity dissonance on the intention to leave, the eudemonic well-being and, very massively, on emotional dissonance; to identify latent profiles separating individuals who wish to change occupation or not, the former with low scores of self-esteem and promotional focus; to underline the importance of phenomena such as social heritage or multi-jobbing. The results are discussed, and the future research envisaged
Rudelle, Astié Anne. "Approche culturelle des compétences politiques en contexte organisationnel français." Electronic Thesis or Diss., Paris 8, 2019. http://www.theses.fr/2019PA080090.
The aim of this thesis was to conceptualize a model of political skill adapted to the French organizational context. Based on an intercultural reflection between the modes of French and American organizational functioning, the Political Skill Inventory (PSI) developed by Ferris, Treadway, Kolodinsky, Hochwarter, Kacmar, Douglas, & Frink (2005) has been extended to positional and ideological levels from Doise’s psychosocial theory (1982), to the formal dimension of organizations (Mintzberg, 1983) and to the strategic analysis of Crozier and Friedberg (1977). Four studies have led to the development of a four-factor structure (access to formal knowledge, interpersonal influence, intuition of strategic relationships, propensity for learning) and gave evidence of the initial validity of the scale of measurement: the French Political Skill Inventory (FPSI). We have shown that the factor structure of the FPSI is not maintained in the American organizational context. The dispositional and personal ability antecedents of political skill from Ferris, Treadway, Perrewé, Brouer, Douglas & Lux (2007) revealed a good fit to our model. Following the finding that men reported significantly higher FPSI scores than women, we showed that the gender differences observed are due to variations in gender identity and not in biological sex. In particular, androgynous profiles reported significantly higher FPSI scores than female and undifferentiated profiles
Rolland, Jean-François. "Développement et validation d'architectures dynamiques." Phd thesis, Université Paul Sabatier - Toulouse III, 2008. http://tel.archives-ouvertes.fr/tel-00367994.
Laurent, Claire. "Développement et validation de modèles d'évaporation multi-composant." Toulouse, ISAE, 2008. http://www.theses.fr/2008ESAE0013.
Choinière, Jean-Philippe. "Conception, développement et validation expérimentale d'une boussole haptique." Master's thesis, Université Laval, 2016. http://hdl.handle.net/20.500.11794/27069.
This Master’s thesis presents the design, control and experimental validation of a haptic compass, designed as a guiding device for the visually impaired in all environments. The literature review shows that there is a need for haptic guidance and how this technology differs from current haptic devices. The proposed device uses the principle of asymmetric torques. Its design is based on a direct drive motor and a pre-calibrated open-loop control, which allows the generation of stimuli in a wide range of frequencies. The device is calibrated and its mechanical properties are evaluated to ensure that the open-loop control provides sufficient precision. A first user study presents interesting effectiveness in the frequency range 5 to 15 Hz and for torques over 40 mNm. In a second experiment, the use of a haptic feedback proportional to the anglular error is shown to significantly improve the results. An experimental validation by a group of subjects walking with the aid of the portable device in an open environment is then reported. The results show that all participants met all route objectives with small lateral deviations (0:39 m on average). The performances obtained and the user’s impressions are favorable and confirm the potential of this device. Finally, a model of the human orientation task is developed and demonstrates the importance of individual customization. A receding horizon strategy for the placement of the current target on the path is thereby proposed.
Iorga, Cristian. "Développement de méthodologies de conception et validation pour le développement de produits et composants structuraux." Thèse, Université de Sherbrooke, 2013. http://hdl.handle.net/11143/11427.
Girard, Pascale. "Validation partielle et développement d'un modèle de microclimat urbain." Master's thesis, Université Laval, 2016. http://hdl.handle.net/20.500.11794/27403.
Blaud, Pierre Clément. "Développement d'un modèle de simulation de supercondensateur et validation expérimentale." Mémoire, École de technologie supérieure, 2012. http://espace.etsmtl.ca/1084/1/BLAUD_Pierre_Cl%C3%A9ment.pdf.
Delage, Valérie. "Développement et validation d'un dosage immunoenzymométrique du récepteur des estrogènes." Lyon 1, 1997. http://www.theses.fr/1997LYO1T207.
Hermawan, Hendra. "Conception, développement et validation d'alliages métalliques dégradables utilisés en chirurgie endovasculaire." Thesis, Université Laval, 2009. http://www.theses.ulaval.ca/2009/26286/26286.pdf.
This doctoral project permitted for the first time to design, develop and study metallic alloys as degradable biomaterials. Between 2001 and 2003, commercially pure iron and magnesium alloys were evaluated for their possibility to become degradable biomaterials. In those studies, it was found that their mechanical property and degradation behaviour were not clinically well suited. In this context, a series of Fe–Mn alloys was produced with the objective to obtain physical and mechanical properties similar to those of stainless steel 316L (SS316L) and degradation behaviour more suited in human physiological environment than pure iron and magnesium alloys. Four alloys with manganese content ranging between 20 and 35 wt% were prepared via a powder metallurgy route followed by a series of cold rolling and resintering cycles. Results showed that their microstructure was mainly composed of austenitic phase with the trace of martensitic phase in alloys having lower manganese content. This microstructure resulted into a nonmagnetic behaviour of the alloys with magnetic susceptibility lower than that of SS316L. In contrast to SS316L, this magnetic susceptibility remained constant after having plastic deformation. The alloys showed mechanical property approached to that of SS316L. As manganese content increased, the yield strength decreased from 420 to 210 MPa and the elongation increased from 5 to 32%. The alloys degraded in simulated coronary artery conditions by the mechanism of corrosion. Their average corrosion rate was faster than that of pure iron and slower than magnesium alloys. The degradation products constituted of iron hydroxides and calcium/phosphorus containing layers which adhered onto the substrate. The release of iron and manganese ions into the solution was limited by the insoluble degradation layer. The cell viability assays showed that the Fe–Mn alloys possess a low inhibition effect to fibroblast cells metabolic activities demonstrating their potentiality to be a biocompatible degradable biomaterial.
Books on the topic "Développement et validation d’échelle":
Vallerand, Robert J. Développement et validation de l'échelle de motivation à la consommation d'alcool, ÉMCA. [Montréal: Université du Québec à Montréal. Laboratoire de recherche sur le comportement social, Dép. de psychologie], 1995.
Canada, Canada Foreign Affairs. Science : arrangement between the Government of Canada and the European Space Agency concerning participation by the government of Canada in the development and validation activities of the GalileoSat Programme, Paris, 6 October 2003, in force 6 October 2003 =: Science : arrangement entre le gouvernement du Canada et l'Agence spatiale européenne concernant la participation du gouvernment du Canada aux activités de développement et de validation du programme GalileoSat, Paris, le 6 octobre 2003, en vigueur le 6 octobre 2003. Ottawa, Ont: Public Works and Government Services Canada = Travaux publics et services gouvernementaux Canada, 2007.
Book chapters on the topic "Développement et validation d’échelle":
Lorgnier, Nicolas. "Utiliser les valeurs du comité international olympique pour étudier les relations à la marque : développement d’échelle et application en France et aux États-Unis." In Les Défis de l'Olympisme, entre héritage et innovation, 205–25. INSEP-Éditions, 2021. http://dx.doi.org/10.4000/books.insep.3908.
KARIMI, Battle, and Lionel RANJARD. "Biogéographie bactérienne des sols à l’échelle de la France." In La biogéographie, 181–212. ISTE Group, 2022. http://dx.doi.org/10.51926/iste.9060.ch7.
Conference papers on the topic "Développement et validation d’échelle":
Dray, X., C. Li, JC Saurin, F. Cholet, G. Rahmi, JP Le Mouel, C. Leandri, et al. "CAD-CAP: une base de données française à vocation internationale, pour le développement et la validation d'outils de diagnostic assisté par ordinateur en vidéocapsule endoscopique du grêle." In Journées Francophones d'Hépato-Gastroentérologie et d'Oncologie Digestive (JFHOD). Georg Thieme Verlag KG, 2018. http://dx.doi.org/10.1055/s-0038-1623358.
Reports on the topic "Développement et validation d’échelle":
Logan, C. E., H. A. J. Russell, A. K. Burt, A. Burt, R. P. M. Mulligan, D. R. Sharpe, and A. F. Bajc. A three-dimensional surficial geology model of southern Ontario. Natural Resources Canada/CMSS/Information Management, 2024. http://dx.doi.org/10.4095/pudw24j7tx.