Academic literature on the topic 'Design refrigeration capacity'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Design refrigeration capacity.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Design refrigeration capacity"
Dubey, Gautam A., Vinay R. Chaurasia, Amit Kumar, S. Chaurasiya, Vidyesh T. Churi, and M. A. Gulbarga. "Design and Fabrication of Solar Powered Portable Medical Refrigerator for Remote and Rural areas based on Peltier Effect." International Journal for Research in Applied Science and Engineering Technology 10, no. 4 (April 30, 2022): 903–9. http://dx.doi.org/10.22214/ijraset.2022.41380.
Full textYadav, Varun, Supradeepa Panual G, Neeraj Yadav, Ratnam Bordia, Rohini Soni, and Rinkesh Khandey. "Design and Fabrication of Solar Powered Vapour Absorption Refrigeration System." E3S Web of Conferences 170 (2020): 02011. http://dx.doi.org/10.1051/e3sconf/202017002011.
Full textРадченко, Микола Іванович, Євген Іванович Трушляков, Сергій Анатолійович Кантор, Богдан Сергійович Портной, and Анатолій Анатолійович Зубарєв. "МЕТОД ВИЗНАЧЕННЯ ТЕПЛОВОГО НАВАНТАЖЕННЯ СИСТЕМИ КОНДИЦІЮВАННЯ ПОВІТРЯ ЗА МАКСИМАЛЬНИМ ТЕМПОМ ПРИРОЩЕННЯ ХОЛОДОПРОДУКТИВНОСТІ (на прикладі кондиціювання повітря енергетичного призначення)." Aerospace technic and technology, no. 4 (October 14, 2018): 44–48. http://dx.doi.org/10.32620/aktt.2018.4.05.
Full textРадченко, Андрій Миколайович, Богдан Сергійович Портной, Сергій Анатолійович Кантор, Олександр Ігорович Прядко, and Іван Володимирович Калініченко. "ПІДВИЩЕННЯ ЕФЕКТИВНОСТІ ОХОЛОДЖЕННЯ ПОВІТРЯ НА ВХОДІ ГТД ХОЛОДИЛЬНИМИ МАШИНАМИ ШЛЯХОМ АКУМУЛЯЦІЇ ХОЛОДУ." Aerospace technic and technology, no. 4 (August 28, 2020): 22–27. http://dx.doi.org/10.32620/aktt.2020.4.03.
Full textGanesh, Mandave. "Design of Evaporator Coil and Performance Evaluation of Vapour Compression Refrigeration System with Three Layer Evaporator." International Journal for Research in Applied Science and Engineering Technology 9, no. VI (June 30, 2021): 5130–33. http://dx.doi.org/10.22214/ijraset.2021.36096.
Full textKeawkamrop, Thawatchai, and Somchai Wongwises. "Effect of Cycle Frequency of a Reciprocating Magnetic Refrigerator Prototype on the Temperature Span and Cooling Capacity." International Journal of Air-Conditioning and Refrigeration 27, no. 01 (March 2019): 1950002. http://dx.doi.org/10.1142/s2010132519500020.
Full textKHOROLSKY, Valentyn, Yurii KORENETS, Yulіya PETRUSHYNA, and Ivan RASCHEKHMAROV. "IMPROVEMENT OF SYSTEMS FOR MONITORING AND CONTROLLING THE PROCESS OF FREEZING PRODUCTS IN REFRIGERATING CHAMBERS OF INDUSTRIAL REFRIGERATORS." Herald of Khmelnytskyi National University 305, no. 1 (February 23, 2022): 247–55. http://dx.doi.org/10.31891/2307-5732-2022-305-1-247-255.
Full textLi, Jie, Xin Ping Ou Yang, and Lian Jie Zhang. "Structure Design of a New Kind of Rotary Refrigeration Compressor." Advanced Materials Research 201-203 (February 2011): 2544–49. http://dx.doi.org/10.4028/www.scientific.net/amr.201-203.2544.
Full textMani, Kolandavel, Vellappan Selladurai, and Natarajan Murugan. "Experimental investigations with eco-friendly refrigerants using design of experiments technique-mathematical modeling and experimental validation." Thermal Science 18, suppl.2 (2014): 363–74. http://dx.doi.org/10.2298/tsci110805114m.
Full textAlahmer, Ali, Malik Al-Amayreh, Ahmad O. Mostafa, Mohammad Al-Dabbas, and Hegazy Rezk. "Magnetic Refrigeration Design Technologies: State of the Art and General Perspectives." Energies 14, no. 15 (July 31, 2021): 4662. http://dx.doi.org/10.3390/en14154662.
Full textDissertations / Theses on the topic "Design refrigeration capacity"
Trushliakov, E., A. Radchenko, M. Radchenko, S. Kantor, O. Zielikov, Є. Трушляков, А. Радченко, М. Радченко, С. Кантор, and А. Зеліков. "The efficiency of refrigeration capacity regulation in ambient air conditioning systems." Thesis, 2020. http://eir.nuos.edu.ua/xmlui/handle/123456789/4345.
Full textРозроблено новий метод і підхід до аналізу ефективності системи кондиціювання зовнішнього повітря, згідно з яким весь діапазон змінних теплових навантажень поділяється на дві зони: зона обробки навколишнього повітря зі значними коливаннями поточного теплового навантаження і зона без коливань. Пропонований спосіб регулювання холодопродуктивності дозволяє підвищити ефективність використання встановленої холодопродуктивності в поточних кліматичних умовах.
Abstract. A new method and approach to analyzing the efficiency of ambient air conditioning system has been developed, according to which the overall range of changeable heat loads is divided in two zones: the zone of ambient air processing with considerable fluctuations of the current heat load and a zone without fluctuations. The proposed method of the refrigeration capacity regulation allows to increase the efficiency of utilizing the installed refrigeration capacity in current climatic conditions.
Radchenko, M., E. Trushliakov, A. Radchenko, S. Kantor, V. Tkachenko, М. Радченко, Є. Трушляков, А. Радченко, С. Кантор, and В. Ткаченко. "Approach to enhance the energetic efficiency of air conditioning systems by cooling load distribution in ambient air procession." Thesis, 2020. http://eir.nuos.edu.ua/xmlui/handle/123456789/4346.
Full textУ загальному випадку весь діапазон холодопродуктивності будь-якої системи кондиціювання повітря включає нестабільний діапазон і порівняно стабільну частину холодопродуктивності для подальшого охолодження повітря. Таким чином, стабільний діапазон холодопродуктивності може бути забезпечений роботою звичайного компресора, в той час як режим із значними коливаннями холодопродуктивності вимагає її модуляції. Пропонований підхід може бути використаний для проектування систем зі змінним потоком хладагента (VRF), забезпечених системою обробки зовнішнього повітря (OAP).
Abstract. In general case, an overall cooling load band of any air conditioning system comprises the unstable cooling load range and a comparatively stable cooling load part for further air cooling. Thus, the stable cooling load range can be covered by operation of conventional compressor, meantime mode with considerable cooling load fluctuation needs load modulation. A proposed method can be adopted for designing Variable Refrigerant Flow (VRF) systems provided with Outdoor Air Processing (OAP) system.
Трушляков, Є. І., А. М. Радченко, Б. С. Портной, С. Г. Фордуй, E. I. Trushliakov, A. M. Radchenko, B. S. Portnoi, and S. G. Forduy. "Методи визначення теплового навантаження систем кондиціювання повітря з урахуванням поточних кліматичних умов." Thesis, 2019. http://eir.nuos.edu.ua/xmlui/handle/123456789/4332.
Full textАнотація. Одним з найбільш привабливих резервів підвищення енергетичної ефективності систем кондиціювання повітря є забезпечення роботи холодильних компресорів в номінальному або близькому до номінального режимах шляхом вибору раціонального проектного теплового навантаження та його розподілу в межах його проектної величини відповідно до характеру поточного теплового навантаження за змінних поточних кліматичних умов з метою максимального або близького до нього річного виробництва холоду відповідно до його витрат на кондиціювання повітря. В загальному випадку весь діапазон поточних теплових навантажень будь-якої системи кондиціювання повітря включає діапазон нестабільних навантажень, пов’язаних з попереднім охолодженням зовнішнього повітря зі значними коливаннями витрат холодопродуктивності відповідно до поточних кліматичних умов, і порівняно стабільну частку холодильної потужності, що витрачається на подальше зниження температури повітря від певної порогової температури до кінцевої температури на виході. Цілком очевидно, що стабільний діапазон теплового навантаження може бути забезпечений при роботі звичайного компресора в режимі, близькому до номінального режимі, тоді як попереднє охолодження зовнішнього повітря зі значними коливаннями теплового навантаження потребує регулювання холодопродуктивності шляхом застосування компресора з регульованою швидкістю. Таким чином, за характером зміни поточних теплових навантажень будь-яка система кондиціювання повітря, чи то центральна система кондиціювання повітря з його тепловологісною обробкою в центральному кондиціонері, чи то її комбінація з місцевою рециркуляційною системою кондиціювання повітря в приміщеннях, по суті, складається з двох підсистем: попереднього охолодження зовнішнього повітря і його подальшого охолодження до встановленої кінцевої температури. Запропонований метод розподілу проектного теплового навантаження в залежності від характеру поточних теплових навантажень є корисним для раціонального проектування систем центрального кондиціювання повітря та їх комбінованих версій з місцевою системою кондиціювання повітря.
Abstract. One of the most attractive reserves for improving the energy efficiency of air conditioning systems is to ensure the operation of refrigeration compressors in nominal or close to nominal modes by selecting a rational design heat load and distributing it within its design value according to the behavior of the current heat load under variable current climatic conditions to provide the maximum or close to maximum annual cooling capacity generation accord-ing to cooling duties of air conditioning. In the general case, the overall range of current thermal loads of any air conditioning system includes a range of unstable loads associated with the precooling of ambient air with significant fluctuations in cooling capacity according with current climatic conditions, and a relatively stable range of cooling capacity consumed to further reduce air temperature from a certain threshold temperature to the final outlet tem-perature. It is quite obvious that a stable range of heat load can be ensured within operating a conventional com-pressor in a mode close to the nominal mode, while precooling the ambient air with significant fluctuations in heat load requires regulation of the cooling capacity through the use of a variable speed compressor. Thus, in response of the behavior of the change in current heat loads, any air conditioning system, whether the central air-conditioning system with its heat procession in a central air conditioner, or a combination thereof with a local recirculation sys-tem of indoor air, essentially consists of two subsystems: pre-cooling the ambient air and then cooling it to the set point temperature. The proposed method of distribution of design heat load depending on the behaviour of current heat load is useful for the rational design of central air conditioning systems and their combined versions with the local air conditioning system.
Аннотация. Одним из самых привлекательных резервов повышения энергетической эффективности систем кондиционирования воздуха является обеспечение работы холодильных компрессоров в номинальном или близком к номинальному режимах путем выбора рационального проектной тепловой нагрузки и ее распределения в пределах ее проектной величины в соответствии с характером текущей тепловой нагрузки в соответствии с меняющимися текущими климатическими условиями с целью максимального или близкого к нему годового производства холода в соответствии с его расходованием на кондиционирование воздуха. В общем случае весь диапазон текущих тепловых нагрузок любой системы кондиционирования воздуха включает диапазон нестабильных нагрузок, связанных с предварительным охлаждением наружного воздуха со значительными колебаниями затрат холодопроизводительности в соответствии с текущими климатическими условиями, и сравнительно стабильную долю холодопроизводительности, расходуемой на снижение температуры воздуха от определенной пороговой температуры до конечной температуры на выходе. Совершенно очевидно, что стабильный диапазон тепловой нагрузки может быть обеспечен при работе обычного компрессора в режиме, близком к номинальному, тогда как предварительное охлаждение наружного воздуха со значительными колебаниями тепловой нагрузки требует регулирования холодопроизводительности путем применения компрессора с регулируемой скоростью. Таким образом, по характеру изменения текущих тепловых нагрузок любая система кондиционирования воздуха, то ли центральная система кондиционирования воздуха с его тепловлажностной обработкой в центральном кондиционере, то ли ее комбинация с местной рециркуляционной системой кондиционирования воздуха в помещениях, по сути, состоит из двух подсистем: предварительного охлаждения наружного воздуха и его дальнейшего охлаждения до установленной конечной температуры. Предложенный метод распределения проектного тепловой нагрузки в зависимости от характера текущих тепловых нагрузок весьма полезный для рационального проектирования систем центрального кондиционирования воздуха и их комбинированных версий с местной системой кондиционирования воздуха.
Трушляков, Є. І., А. М. Радченко, В. С. Ткаченко, Б. С. Портной, С. Г. Фордуй, С. А. Кантор, E. I. Trushliakov, et al. "Ступеневий принцип розподілу теплового навантаження в системі кондиціювання повітря." Thesis, 2019. http://eir.nuos.edu.ua/xmlui/handle/123456789/4333.
Full textАнотація. Підтримання роботи холодильних компресорів в номінальному або близькому до нього режимах шляхом вибору раціонального проектного теплового навантаження та його розподілу за характером зміни поточного теплового навантаження відповідно до поточних кліматичних умов є одним з перспективних резервів підвищення енергетичної ефективності систем кондиціювання повітря, реалізація якого забезпечує досягнення максимального або близького до нього річного виробництва холоду відповідно до його витрат на кондиціювання повітря. В загальному випадку весь діапазон поточних теплових навантажень будь-якої системи кондиціювання повітря включає діапазон нестабільних навантажень, обумовлених попереднім охолодженням зовнішнього повітря зі значними коливаннями витрат холодопродуктивності відповідно до поточних кліматичних умов, і діапазон порівняно стабільної холодильної потужності, що витрачається на подальше зниження температури повітря від певної порогової температури до кінцевої температури на виході. Якщо діапазон стабільного теплового навантаження може бути забезпечений при роботі звичайного компресора в режимі, близькому до номінального, то попереднє охолодження зовнішнього повітря зі значними коливаннями теплового навантаження потребує регулювання холодопродуктивності шляхом застосування компресора з регульованою швидкістю або ж використання надлишку холоду, закумульованого при знижених теплових навантаженнях. Такий ступеневий принцип охолодження забезпечує узгодження роботи холодильних машин з характером зміни поточних теплових навантажень будь-якої системи кондиціювання повітря, чи то центральної системи кондиціювання повітря з його тепловологісною обробкою в центральному кондиціонері, чи то її комбінації з місцевою рециркуляційною системою кондиціювання повітря в приміщеннях, по суті, як комбінації підсистем – попереднього охолодження зовнішнього повітря з регулюванням холодопродуктивності та подальшого охолодження повітря до встановленої кінцевої температури в умовах відносно стабільного теплового навантаження.
Abstract. Maintaining the operation of refrigeration compressors in nominal or close modes by selecting a rational design thermal load and distributing it in response to the behavior of the current thermal load according to the current climatic conditions is one of the promising reserves for improving the energy efficiency of air conditioning systems, which implementation ensures maximum or close to it in the annual cooling production according to air conditioning duties. In general case, the total range of current thermal loads of any air-conditioning system includes a range of unstable loads caused by precooling of ambient air with significant fluctuations in the cooling capacity according to current climatic conditions, and a range of relatively stable cooling capacity expended for further lowering the air temperature from a certain threshold temperature to the final outlet temperature. If a range of stable thermal load can be provided within operating a conventional compressor in a mode close to nominal, then precooling the ambient air with significant fluctuations in thermal load requires adjusting the cooling capacity by using a variable speed compressor or using excess of heat accumulated at reduced load. Such a stage principle of cooling ensures the operation of refrigerating machines matching the behavior of current thermal loads of any air-conditioning system, whether the central air conditioning system with ambient air procession in the central air conditioner, or its combination with the local indoors recirculation air conditioning systems in the air-conditioning system. in essence, as combinations of subsystems – precooling of ambient air with regulation of cooling capacity and subsequent cooling air to the mouth of the set point temperature under relatively stable thermal load.
Аннотация. Поддержание работы холодильных компрессоров в номинальном или близком к нему режимах путем выбора рациональной проектной тепловой нагрузки и ее распределения согласно характеру изменения текущей тепловой нагрузки в соответствии с текущими климатическими условиями является одним из перспективных резервов повышения энергетической эффективности систем кондиционирования воздуха, реализация которого обеспечивает достижение максимального или близкого к нему годового производства холода в соответствии с его расходованием на кондиционирование воздуха. В общем случае весь диапазон текущих тепловых нагрузок любой системы кондиционирования воздуха включает диапазон нестабильных нагрузок, обусловленных предварительным охлаждением наружного воздуха со значительными колебаниями затрат холодопроизводительности в соответствии с текущими климатическими условиями, и диапазон сравнительно стабильной холодопроизводительности, расходуемой на дальнейшее понижение температуры воздуха от некоторой пороговой температуры до конечной температуры на выходе. Если диапазон стабильной тепловой нагрузки может быть покрыт при работе обычного компрессора в режиме, близком к номинальному, то предварительное охлаждение наружного воздуха со значительными колебаниями тепловой нагрузки требует регулирования холодопроизводительности путем применения компрессора с регулируемой скоростью или использования избытка холода, аккумулированного при пониженных тепловых нагрузках. Такой ступенчатый принцип охлаждения обеспечивает согласование работы холодильных машин с характером изменения текущих тепловых нагрузок любой системы кондиционирования воздуха, то ли центральной системы кондиционирования воздуха с его тепловлажностной обработкой в центральном кондиционере, то ли ее комбинации с местной циркуляционной системой кондиционирования воздуха в помещениях, по сути, как комбинации подсистем–предварительного охлаждения наружного воздуха с регулированием холодопроизводительности и последующего охлаждения воздуха до конечной температуры в условиях относительно стабильной тепловой нагрузки.
Book chapters on the topic "Design refrigeration capacity"
Trushliakov, Eugeniy, Andrii Radchenko, Mykola Radchenko, Serhiy Kantor, and Oleksii Zielikov. "The Efficiency of Refrigeration Capacity Regulation in the Ambient Air Conditioning Systems." In Advances in Design, Simulation and Manufacturing III, 343–53. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-50491-5_33.
Full textMcCormick, J. A., G. F. Nellis, W. L. Swift, H. Sixsmith, and J. Reilly. "Design and Test of Low Capacity Reverse Brayton Cryocooler for Refrigeration at 35K and 60K." In Cryocoolers 10, 421–29. Boston, MA: Springer US, 2002. http://dx.doi.org/10.1007/0-306-47090-x_50.
Full textMade Arsana, I., and Ruri Agung Wahyuono. "Design, Performance, and Optimization of the Wire and Tube Heat Exchanger." In Heat Exchangers. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.100817.
Full textGamberi, Mauro, Marco Bortolini, Alessandro Graziani, and Riccardo Manzini. "Retrofitting of R404a Commercial Refrigeration Systems with R410a and R407f HFCs Refrigerants." In Handbook of Research on Advances and Applications in Refrigeration Systems and Technologies, 260–94. IGI Global, 2015. http://dx.doi.org/10.4018/978-1-4666-8398-3.ch007.
Full textConference papers on the topic "Design refrigeration capacity"
Guo, Dongzhi, Jingsheng Gao, Alan J. H. McGaughey, Matthew Moran, Suresh Santhanam, Gary K. Fedder, Bill Anderson, and Shi-Chune Yao. "Design and Evaluation of MEMS-Based Stirling Cycle Micro-Refrigeration System." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-63084.
Full textPeeples, Johnston W. "Capacity Control in Refrigerated Systems." In ASME 2003 International Electronic Packaging Technical Conference and Exhibition. ASMEDC, 2003. http://dx.doi.org/10.1115/ipack2003-35070.
Full textBernal, Ivan, Hector Guido, Spencer Rautus, and Joseph Piacenza. "Toward an Experimental Design Approach for Magnetocaloric Refrigeration Systems." In ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/detc2016-60161.
Full textXu, Shiming, Jian Liang, Yi Jian He, and Ru Xu Du. "Design and Experimental Investigation of a Diffusion Absorption Refrigeration System." In ASME 8th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2006. http://dx.doi.org/10.1115/esda2006-95130.
Full textErickson, Donald C., G. Anand, Riyaz A. Papar, and Jingsong Tang. "Refinery Waste Heat Powered Absorption Refrigeration: Cycle Specification and Design." In ASME 1998 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/imece1998-0866.
Full textBroglia, Thomas, Matteo Iobbi, and Nikola Stosic. "Improving the Capacity and Performance of Air-Conditioning Screw Compressors." In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-13121.
Full textNsofor, Emmanuel C., Phani R. Gurijala, and Zhan Jiang. "Design, Construction and Heat Transfer Analysis of a Thermoacoustic Refrigeration System." In ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-33338.
Full textWei, Jie, Hideo Kubo, and Junichi Ishimine. "Thermal Design and Packaging of a Prototype Refrigeration Cooling System for CMOS-Based MCMs." In ASME 2003 International Electronic Packaging Technical Conference and Exhibition. ASMEDC, 2003. http://dx.doi.org/10.1115/ipack2003-35156.
Full textChakravarthy, Vijayaraghavan, Joe Weber, Abdul-Aziz Rashad, Arun Acharya, and Dante Bonaquist. "Oxygen Liquefier Using a Mixed Gas Refrigeration Cycle." In ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-42124.
Full textLear, William E., ChoonJae Ryu, John F. Crittenden, Aditya Srinivasan, William Ellis, David R. Tiffany, Sherif A. Sherif, and Peter L. Meitner. "System Design of a Novel Combined Cooling, Heat, Power, and Water Microturbine Combined Cycle." In ASME Turbo Expo 2008: Power for Land, Sea, and Air. ASMEDC, 2008. http://dx.doi.org/10.1115/gt2008-51454.
Full text