Academic literature on the topic 'Design cooling capacity'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Design cooling capacity.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Design cooling capacity"
Xu, Ziming, Jun Xu, Zhechen Guo, Haitao Wang, Zheng Sun, and Xuesong Mei. "Design and Optimization of a Novel Microchannel Battery Thermal Management System Based on Digital Twin." Energies 15, no. 4 (February 15, 2022): 1421. http://dx.doi.org/10.3390/en15041421.
Full textLi, Tingxuan, Zhilin Xia, and Xiaochun Fan. "Cooling capacity evaluation of passive radiation cooling materials." Journal of Physics: Conference Series 2200, no. 1 (February 1, 2022): 012021. http://dx.doi.org/10.1088/1742-6596/2200/1/012021.
Full textТрушляков, Євген Іванович, Андрій Миколайович Радченко, Сергій Анатолійович Кантор, Веніамін Сергійович Ткаченко, Сергій Георгійович Фордуй, and Ян Зонмін. "ВИЗНАЧЕННЯ ПРОЕКТНОЇ ХОЛОДОПРОДУКТИВНОСТІ СИСТЕМИ КОНДИЦІЮВАННЯ ПОВІТРЯ В КОНКРЕТНИХ КЛІМАТИЧНИХ УМОВАХ І РІЗНИМИ МЕТОДАМИ." Aerospace technic and technology, no. 6 (December 24, 2019): 15–19. http://dx.doi.org/10.32620/aktt.2019.6.03.
Full textKula, Sinan. "Design Studies of Two Stage Cooling Loop for New Generation Vehicles." Academic Perspective Procedia 3, no. 1 (October 25, 2020): 550–59. http://dx.doi.org/10.33793/acperpro.03.01.104.
Full textSeyed Salehi, Seyed Shahabaldin, Andrea Ferrantelli, Hans Kristjan Aljas, Jarek Kurnitski, and Martin Thalfeldt. "Impact of internal heat gain profiles on the design cooling capacity of landscaped offices." E3S Web of Conferences 246 (2021): 07003. http://dx.doi.org/10.1051/e3sconf/202124607003.
Full textSong, Jiangnan, Ying Huang, Yi Liu, Zongpeng Ma, Lunjun Chen, Taike Li, and Xiang Zhang. "Numerical Investigation and Optimization of Cooling Flow Field Design for Proton Exchange Membrane Fuel Cell." Energies 15, no. 7 (April 2, 2022): 2609. http://dx.doi.org/10.3390/en15072609.
Full textТрушляков, Євген Іванович, Андрій Миколайович Радченко, Микола Іванович Радченко, Сергій Анатолійович Кантор, and Веніамін Сергійович Ткаченко. "ПІДВИЩЕННЯ ЕФЕКТИВНОСТІ КОНДИЦІЮВАННЯ ЗОВНІШНЬОГО ПОВІТРЯ СИСТЕМИ КОМБІНОВАНОГО ТИПУ." Aerospace technic and technology, no. 4 (August 31, 2019): 9–14. http://dx.doi.org/10.32620/aktt.2019.4.02.
Full textLakovic, Mirjana, Milos Banjac, Slobodan Lakovic, and Milica Jovic. "Industrial cooling tower design and operation in the moderate-continental climate conditions." Thermal Science 20, suppl. 5 (2016): 1203–14. http://dx.doi.org/10.2298/tsci16s5203l.
Full textРадченко, Андрій Миколайович, Ян Зонмін, Микола Іванович Радченко, Сергій Анатолійович Кантор, Богдан Сергійович Портной, and Юрій Георгійович Щербак. "ВИЗНАЧЕННЯ ВСТАНОВЛЕНОЇ ХОЛОДОПРОДУКТИВНІСТІ СИСТЕМИ ОХОЛОДЖЕННЯ ПОВІТРЯ НА ВХОДІ ГАЗОТУРБІННОЇ УСТАНОВКИ ЗА ПОТОЧНИМ ТЕПЛОВИМ НАВАНТАЖЕННЯМ." Aerospace technic and technology, no. 2 (April 22, 2019): 56–60. http://dx.doi.org/10.32620/aktt.2019.2.07.
Full textРадченко, Андрій Миколайович. "МЕТОД ВИЗНАЧЕННЯ ХОЛОДОПРОДУКТИВНОСТІ ТЕРМОТРАНСФОРМАТОРА ЗА МАКСИМАЛЬНИМ ТЕМПОМ ПРИРОЩЕННЯ ТЕРМОЧАСОВОГО ПОТЕНЦІАЛУ ОХОЛОДЖЕННЯ ПОВІТРЯ." Aerospace technic and technology, no. 4 (October 14, 2018): 53–57. http://dx.doi.org/10.32620/aktt.2018.4.07.
Full textDissertations / Theses on the topic "Design cooling capacity"
Ritz, Carolina, and Malin Mattsson-Mårn. "Utformningens betydelse för energiförbrukningen : En fallstudie av verksamhetsbyggnader." Thesis, Tekniska Högskolan, Högskolan i Jönköping, JTH, Byggnadsteknik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-28281.
Full textKomárek, Filip. "Návrh rekonstrukce stávající vstupní rozvodny a kabelové sítě 22 kV v areálu fakultní nemocnice." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-377072.
Full textKvasnička, Karel. "Mobilní zdroje elektrické energie." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-413211.
Full textTONG, JUN-YANG, and 童鈞洋. "Design of cooling fin to enhance the generating capacity of thermoelectric module for motorcycle exhaust pipe system." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/76041376202141406786.
Full text國立中興大學
機械工程學系所
104
A thermoelectric module was installed at the exhaust pipe of motorcycle to generate electric power from waste heat in this thesis. Bismuth telluride thermoelectric generators were used in this study and obtained from Industrial Technology Research Institute (ITRI), Hsinchu, Taiwan. To enhance the temperature difference and generating capacity, cooling fins of thermoelectric module at the exhaust pipe of motorcycle were studied. Heat sink analytical and finite element models were used to design the geometry of cooling fins and were compared to the experimental results. Three rotation speeds of motorcycle engine, 1700, 2500 and 3000rpm were investigated in the experiment. Experimental results showed that temperature difference and electrical power increased 10%, 11% and 25% for modified heat sink at 1700rpm, 2500 and 3000rpm, respectively.
Wang, Shih-Chuan, and 王世全. "Design and Experimental Analysis of Cooling Structure of an Outside Metallic Box Used for High Capacity Tele-communication System." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/04955419255171677017.
Full text國立中興大學
機械工程學系所
95
The main object of experiment is built for expanding service area in Chunghwa Telecom Company , LTD. It is a metallic box that is on the side of the road used for High Capacity Tele-communication System. It consists of two layers. Inside layer is installed with internet equipment that is the main heat source. Outside layer is installed with subscriber line and cooling equipment. The experiment is researched for cooling structure of an outside metallic box used for High Capacity Tele-communication System. The process of experiment is used with air for cooling fluid. Then analyses the effect of heat transfer that cooling structure of an outside metallic box used for High Capacity Tele-communication System Inside layer has three fixed heat source that are 350W,600W and 850W. There are 1 ~ 3 cooling structures that are consist of (1)heat exchanger on the side of the box (2)eight cooling fans on the top of the box (3)forced cooling structure( assemble with heat sinks and fans) The result of experiment find (1)Balance temperature changes and follows the background temperature. (2)It can create 6.5%~20% effect of heat transfer with forced cooling structure (3)it could reduce the balance temperature and fault rate of circuit board. At the same time , it can advance the service quality.
Trushliakov, E., A. Radchenko, M. Radchenko, S. Kantor, O. Zielikov, Є. Трушляков, А. Радченко, М. Радченко, С. Кантор, and А. Зеліков. "The efficiency of refrigeration capacity regulation in ambient air conditioning systems." Thesis, 2020. http://eir.nuos.edu.ua/xmlui/handle/123456789/4345.
Full textРозроблено новий метод і підхід до аналізу ефективності системи кондиціювання зовнішнього повітря, згідно з яким весь діапазон змінних теплових навантажень поділяється на дві зони: зона обробки навколишнього повітря зі значними коливаннями поточного теплового навантаження і зона без коливань. Пропонований спосіб регулювання холодопродуктивності дозволяє підвищити ефективність використання встановленої холодопродуктивності в поточних кліматичних умовах.
Abstract. A new method and approach to analyzing the efficiency of ambient air conditioning system has been developed, according to which the overall range of changeable heat loads is divided in two zones: the zone of ambient air processing with considerable fluctuations of the current heat load and a zone without fluctuations. The proposed method of the refrigeration capacity regulation allows to increase the efficiency of utilizing the installed refrigeration capacity in current climatic conditions.
Radchenko, M., E. Trushliakov, A. Radchenko, S. Kantor, V. Tkachenko, М. Радченко, Є. Трушляков, А. Радченко, С. Кантор, and В. Ткаченко. "Approach to enhance the energetic efficiency of air conditioning systems by cooling load distribution in ambient air procession." Thesis, 2020. http://eir.nuos.edu.ua/xmlui/handle/123456789/4346.
Full textУ загальному випадку весь діапазон холодопродуктивності будь-якої системи кондиціювання повітря включає нестабільний діапазон і порівняно стабільну частину холодопродуктивності для подальшого охолодження повітря. Таким чином, стабільний діапазон холодопродуктивності може бути забезпечений роботою звичайного компресора, в той час як режим із значними коливаннями холодопродуктивності вимагає її модуляції. Пропонований підхід може бути використаний для проектування систем зі змінним потоком хладагента (VRF), забезпечених системою обробки зовнішнього повітря (OAP).
Abstract. In general case, an overall cooling load band of any air conditioning system comprises the unstable cooling load range and a comparatively stable cooling load part for further air cooling. Thus, the stable cooling load range can be covered by operation of conventional compressor, meantime mode with considerable cooling load fluctuation needs load modulation. A proposed method can be adopted for designing Variable Refrigerant Flow (VRF) systems provided with Outdoor Air Processing (OAP) system.
Трушляков, Є. І., А. М. Радченко, Б. С. Портной, С. Г. Фордуй, E. I. Trushliakov, A. M. Radchenko, B. S. Portnoi, and S. G. Forduy. "Методи визначення теплового навантаження систем кондиціювання повітря з урахуванням поточних кліматичних умов." Thesis, 2019. http://eir.nuos.edu.ua/xmlui/handle/123456789/4332.
Full textАнотація. Одним з найбільш привабливих резервів підвищення енергетичної ефективності систем кондиціювання повітря є забезпечення роботи холодильних компресорів в номінальному або близькому до номінального режимах шляхом вибору раціонального проектного теплового навантаження та його розподілу в межах його проектної величини відповідно до характеру поточного теплового навантаження за змінних поточних кліматичних умов з метою максимального або близького до нього річного виробництва холоду відповідно до його витрат на кондиціювання повітря. В загальному випадку весь діапазон поточних теплових навантажень будь-якої системи кондиціювання повітря включає діапазон нестабільних навантажень, пов’язаних з попереднім охолодженням зовнішнього повітря зі значними коливаннями витрат холодопродуктивності відповідно до поточних кліматичних умов, і порівняно стабільну частку холодильної потужності, що витрачається на подальше зниження температури повітря від певної порогової температури до кінцевої температури на виході. Цілком очевидно, що стабільний діапазон теплового навантаження може бути забезпечений при роботі звичайного компресора в режимі, близькому до номінального режимі, тоді як попереднє охолодження зовнішнього повітря зі значними коливаннями теплового навантаження потребує регулювання холодопродуктивності шляхом застосування компресора з регульованою швидкістю. Таким чином, за характером зміни поточних теплових навантажень будь-яка система кондиціювання повітря, чи то центральна система кондиціювання повітря з його тепловологісною обробкою в центральному кондиціонері, чи то її комбінація з місцевою рециркуляційною системою кондиціювання повітря в приміщеннях, по суті, складається з двох підсистем: попереднього охолодження зовнішнього повітря і його подальшого охолодження до встановленої кінцевої температури. Запропонований метод розподілу проектного теплового навантаження в залежності від характеру поточних теплових навантажень є корисним для раціонального проектування систем центрального кондиціювання повітря та їх комбінованих версій з місцевою системою кондиціювання повітря.
Abstract. One of the most attractive reserves for improving the energy efficiency of air conditioning systems is to ensure the operation of refrigeration compressors in nominal or close to nominal modes by selecting a rational design heat load and distributing it within its design value according to the behavior of the current heat load under variable current climatic conditions to provide the maximum or close to maximum annual cooling capacity generation accord-ing to cooling duties of air conditioning. In the general case, the overall range of current thermal loads of any air conditioning system includes a range of unstable loads associated with the precooling of ambient air with significant fluctuations in cooling capacity according with current climatic conditions, and a relatively stable range of cooling capacity consumed to further reduce air temperature from a certain threshold temperature to the final outlet tem-perature. It is quite obvious that a stable range of heat load can be ensured within operating a conventional com-pressor in a mode close to the nominal mode, while precooling the ambient air with significant fluctuations in heat load requires regulation of the cooling capacity through the use of a variable speed compressor. Thus, in response of the behavior of the change in current heat loads, any air conditioning system, whether the central air-conditioning system with its heat procession in a central air conditioner, or a combination thereof with a local recirculation sys-tem of indoor air, essentially consists of two subsystems: pre-cooling the ambient air and then cooling it to the set point temperature. The proposed method of distribution of design heat load depending on the behaviour of current heat load is useful for the rational design of central air conditioning systems and their combined versions with the local air conditioning system.
Аннотация. Одним из самых привлекательных резервов повышения энергетической эффективности систем кондиционирования воздуха является обеспечение работы холодильных компрессоров в номинальном или близком к номинальному режимах путем выбора рационального проектной тепловой нагрузки и ее распределения в пределах ее проектной величины в соответствии с характером текущей тепловой нагрузки в соответствии с меняющимися текущими климатическими условиями с целью максимального или близкого к нему годового производства холода в соответствии с его расходованием на кондиционирование воздуха. В общем случае весь диапазон текущих тепловых нагрузок любой системы кондиционирования воздуха включает диапазон нестабильных нагрузок, связанных с предварительным охлаждением наружного воздуха со значительными колебаниями затрат холодопроизводительности в соответствии с текущими климатическими условиями, и сравнительно стабильную долю холодопроизводительности, расходуемой на снижение температуры воздуха от определенной пороговой температуры до конечной температуры на выходе. Совершенно очевидно, что стабильный диапазон тепловой нагрузки может быть обеспечен при работе обычного компрессора в режиме, близком к номинальному, тогда как предварительное охлаждение наружного воздуха со значительными колебаниями тепловой нагрузки требует регулирования холодопроизводительности путем применения компрессора с регулируемой скоростью. Таким образом, по характеру изменения текущих тепловых нагрузок любая система кондиционирования воздуха, то ли центральная система кондиционирования воздуха с его тепловлажностной обработкой в центральном кондиционере, то ли ее комбинация с местной рециркуляционной системой кондиционирования воздуха в помещениях, по сути, состоит из двух подсистем: предварительного охлаждения наружного воздуха и его дальнейшего охлаждения до установленной конечной температуры. Предложенный метод распределения проектного тепловой нагрузки в зависимости от характера текущих тепловых нагрузок весьма полезный для рационального проектирования систем центрального кондиционирования воздуха и их комбинированных версий с местной системой кондиционирования воздуха.
Трушляков, Є. І., А. М. Радченко, В. С. Ткаченко, Б. С. Портной, С. Г. Фордуй, С. А. Кантор, E. I. Trushliakov, et al. "Ступеневий принцип розподілу теплового навантаження в системі кондиціювання повітря." Thesis, 2019. http://eir.nuos.edu.ua/xmlui/handle/123456789/4333.
Full textАнотація. Підтримання роботи холодильних компресорів в номінальному або близькому до нього режимах шляхом вибору раціонального проектного теплового навантаження та його розподілу за характером зміни поточного теплового навантаження відповідно до поточних кліматичних умов є одним з перспективних резервів підвищення енергетичної ефективності систем кондиціювання повітря, реалізація якого забезпечує досягнення максимального або близького до нього річного виробництва холоду відповідно до його витрат на кондиціювання повітря. В загальному випадку весь діапазон поточних теплових навантажень будь-якої системи кондиціювання повітря включає діапазон нестабільних навантажень, обумовлених попереднім охолодженням зовнішнього повітря зі значними коливаннями витрат холодопродуктивності відповідно до поточних кліматичних умов, і діапазон порівняно стабільної холодильної потужності, що витрачається на подальше зниження температури повітря від певної порогової температури до кінцевої температури на виході. Якщо діапазон стабільного теплового навантаження може бути забезпечений при роботі звичайного компресора в режимі, близькому до номінального, то попереднє охолодження зовнішнього повітря зі значними коливаннями теплового навантаження потребує регулювання холодопродуктивності шляхом застосування компресора з регульованою швидкістю або ж використання надлишку холоду, закумульованого при знижених теплових навантаженнях. Такий ступеневий принцип охолодження забезпечує узгодження роботи холодильних машин з характером зміни поточних теплових навантажень будь-якої системи кондиціювання повітря, чи то центральної системи кондиціювання повітря з його тепловологісною обробкою в центральному кондиціонері, чи то її комбінації з місцевою рециркуляційною системою кондиціювання повітря в приміщеннях, по суті, як комбінації підсистем – попереднього охолодження зовнішнього повітря з регулюванням холодопродуктивності та подальшого охолодження повітря до встановленої кінцевої температури в умовах відносно стабільного теплового навантаження.
Abstract. Maintaining the operation of refrigeration compressors in nominal or close modes by selecting a rational design thermal load and distributing it in response to the behavior of the current thermal load according to the current climatic conditions is one of the promising reserves for improving the energy efficiency of air conditioning systems, which implementation ensures maximum or close to it in the annual cooling production according to air conditioning duties. In general case, the total range of current thermal loads of any air-conditioning system includes a range of unstable loads caused by precooling of ambient air with significant fluctuations in the cooling capacity according to current climatic conditions, and a range of relatively stable cooling capacity expended for further lowering the air temperature from a certain threshold temperature to the final outlet temperature. If a range of stable thermal load can be provided within operating a conventional compressor in a mode close to nominal, then precooling the ambient air with significant fluctuations in thermal load requires adjusting the cooling capacity by using a variable speed compressor or using excess of heat accumulated at reduced load. Such a stage principle of cooling ensures the operation of refrigerating machines matching the behavior of current thermal loads of any air-conditioning system, whether the central air conditioning system with ambient air procession in the central air conditioner, or its combination with the local indoors recirculation air conditioning systems in the air-conditioning system. in essence, as combinations of subsystems – precooling of ambient air with regulation of cooling capacity and subsequent cooling air to the mouth of the set point temperature under relatively stable thermal load.
Аннотация. Поддержание работы холодильных компрессоров в номинальном или близком к нему режимах путем выбора рациональной проектной тепловой нагрузки и ее распределения согласно характеру изменения текущей тепловой нагрузки в соответствии с текущими климатическими условиями является одним из перспективных резервов повышения энергетической эффективности систем кондиционирования воздуха, реализация которого обеспечивает достижение максимального или близкого к нему годового производства холода в соответствии с его расходованием на кондиционирование воздуха. В общем случае весь диапазон текущих тепловых нагрузок любой системы кондиционирования воздуха включает диапазон нестабильных нагрузок, обусловленных предварительным охлаждением наружного воздуха со значительными колебаниями затрат холодопроизводительности в соответствии с текущими климатическими условиями, и диапазон сравнительно стабильной холодопроизводительности, расходуемой на дальнейшее понижение температуры воздуха от некоторой пороговой температуры до конечной температуры на выходе. Если диапазон стабильной тепловой нагрузки может быть покрыт при работе обычного компрессора в режиме, близком к номинальному, то предварительное охлаждение наружного воздуха со значительными колебаниями тепловой нагрузки требует регулирования холодопроизводительности путем применения компрессора с регулируемой скоростью или использования избытка холода, аккумулированного при пониженных тепловых нагрузках. Такой ступенчатый принцип охлаждения обеспечивает согласование работы холодильных машин с характером изменения текущих тепловых нагрузок любой системы кондиционирования воздуха, то ли центральной системы кондиционирования воздуха с его тепловлажностной обработкой в центральном кондиционере, то ли ее комбинации с местной циркуляционной системой кондиционирования воздуха в помещениях, по сути, как комбинации подсистем–предварительного охлаждения наружного воздуха с регулированием холодопроизводительности и последующего охлаждения воздуха до конечной температуры в условиях относительно стабильной тепловой нагрузки.
Book chapters on the topic "Design cooling capacity"
Angelides, M. "Earthquake capacity design considerations." In Natural Draught Cooling Towers, 293–97. CRC Press, 2004. http://dx.doi.org/10.1201/b17001-44.
Full textZhao, Jinhui, Yifan Bu, and Lijun Zhang. "Design and Performance of Heat Pipe Air-Conditioning Based on Latent Heat of Water Evaporation." In Advances in Transdisciplinary Engineering. IOS Press, 2022. http://dx.doi.org/10.3233/atde220056.
Full textEsarte, Jesús, Roger R. Riehl, Simone Mancin, Jesús Mª Blanco, Maite Aresti, and Juncal Estella. "Nanofluid as Advanced Cooling Technology. Success Stories." In Heat Transfer - Design, Experimentation and Applications [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.96247.
Full textYang, Fei, Shengting Kuai, and Zhe Wang. "Study on Water Cooling Performance of IGBT Module in Wind Power Converter." In Advances in Transdisciplinary Engineering. IOS Press, 2021. http://dx.doi.org/10.3233/atde210262.
Full textRamesh Korasikha, Naga, Thopudurthi Karthikeya Sharma, Gadale Amba Prasad Rao, and Kotha Madhu Murthy. "Recent Advancements in Thermal Performance Enhancement in Microchannel Heatsinks for Electronic Cooling Application." In Heat Transfer - Design, Experimentation and Applications [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.97087.
Full textLiu, Xiao-Chen, and Leif H. Skibsted. "Advances in understanding milk salts." In Understanding and improving the functional and nutritional properties of milk, 433–70. Burleigh Dodds Science Publishing, 2022. http://dx.doi.org/10.19103/as.2022.0099.14.
Full textPonnusamy, Vasaki, Bobby Sharma, and Gan Ming Lee. "Green Energy in Data Centers Using Internet of Things." In Role of IoT in Green Energy Systems, 225–46. IGI Global, 2021. http://dx.doi.org/10.4018/978-1-7998-6709-8.ch010.
Full textGamberi, Mauro, Marco Bortolini, Alessandro Graziani, and Riccardo Manzini. "Retrofitting of R404a Commercial Refrigeration Systems with R410a and R407f HFCs Refrigerants." In Handbook of Research on Advances and Applications in Refrigeration Systems and Technologies, 260–94. IGI Global, 2015. http://dx.doi.org/10.4018/978-1-4666-8398-3.ch007.
Full text"put capacity and does not require premixing; it is fairly inexpensive and suitable for continuous operation. Major drawbacks to this equipment are its lack of availability, the need for special heating and cooling control systems, no available laboratory model, and the need for many trial-and-error runs in order to scale-up to production. 8. Static Mixers A true low-shear and low-energy requirement device for emulsifying immiscible liq-uid mixtures is the static mixer. Sometimes called a pipeline mixer, this device is ac-tually a series of specially designed baffles in a cylindrical pipe as shown in Fig. 42. These simple devices are used extensively for the preparation of unstable emulsions for liquid-liquid extraction purposes. Droplet sizes, obtainable using static mixers, have been studied extensively and vary with viscosity, interfacial tension, pressure drop, and static mixer design [45]. Size distributions obtainable range from 1000-100 |am. Hence, al-though there are very few emulsions stable in this region, the static mixer has seen application as an in-line premixer in continuous processes or in recirculation loops to batch-processing equipment. F. Nonmechanical Disperse Processing Recently a new processing technique became available for the production of stable and uniform liposomes. It uses the physico-chemical properties of the supercritical liquids rather than the mechanical forces of the pumps. One such a process technology is pre-sented in this section. 1. Critical Fluids Liposome Process Near-critical or supercritical fluid solvents with or without polar cosolvents (SuperFluids™) (Aphios, Corp., Woburn, MA) for the formation of uniform and stable liposomes having high encapsulation efficiencies has been used [46-48]. Supercritical or near-critical fluids as shown by the pressure-temperature diagram in Fig. 43, are gases such as carbon dioxide and propane that have been processed under ambient conditions. When compressed at conditions above their critical temperature and pres-sure, these substances become fluids with liquidlike density and the ability to dissolve other materials, and gaslike properties of low viscosity and high diffusivity. The gas-eous characteristics increase mass transfer rates, thereby significantly reducing process-ing time. Small added amounts of miscible polar cosolvents, such as alcohol, can be used to adjust polarity and to maximize the selectivity and capacity of the solvent. Fig. 42 Static mixer. (From Ref. 44.)." In Pharmaceutical Dosage Forms, 370–75. CRC Press, 1998. http://dx.doi.org/10.1201/9781420000955-56.
Full textConference papers on the topic "Design cooling capacity"
Fujimoto, Takayuki, Nobuyuki Isoshima, Hiroyuki Toyoda, Yoshiaki Yamauchi, Hitoshi Matsushima, and Ikuo Nishida. "Cooling Design for the Next Generation Optical Disc Drive." In ASME 2007 InterPACK Conference collocated with the ASME/JSME 2007 Thermal Engineering Heat Transfer Summer Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/ipack2007-33263.
Full textWang, Tao, Fang Wang, Hongqun Chen, Junyan Ou, Dawei Yu, and Jiawen Zhang. "Research on Small-scale Variable Capacity Evaporative Cooling Plate System for Chips with High Heating Flux." In 5th International Conference on Advanced Design and Manufacturing Engineering. Paris, France: Atlantis Press, 2015. http://dx.doi.org/10.2991/icadme-15.2015.407.
Full textTao, Yubo, Baoxin Hao, Xuan Chen, Hao Chen, and Jing Shi. "Optimal Capacity Design for Solar Combined Cooling Heating and Power System with Energy Storage." In 2018 2nd IEEE Conference on Energy Internet and Energy System Integration (EI2). IEEE, 2018. http://dx.doi.org/10.1109/ei2.2018.8582466.
Full textGhahremani, Amir R., F. Roshanghalb, R. Jahanbakhshi, M. H. Saidi, and S. Kazemzadeh Hannani. "Performance Analysis and Optimization of High Capacity Pulse Tube Refrigerator." In ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2010. http://dx.doi.org/10.1115/esda2010-24863.
Full textGong, Xiao, Bo Sun, Baobin Zhou, and Liang Zhang. "Combined Cooling Heating and Power System Design and Capacity Configuration taking into account Solar Photovoltaic." In 2019 14th IEEE Conference on Industrial Electronics and Applications (ICIEA). IEEE, 2019. http://dx.doi.org/10.1109/iciea.2019.8833801.
Full textPeeples, Johnston W. "Capacity Control in Refrigerated Systems." In ASME 2003 International Electronic Packaging Technical Conference and Exhibition. ASMEDC, 2003. http://dx.doi.org/10.1115/ipack2003-35070.
Full textDembo, N., V. Chepkin, M. Goyhenberg, and A. Lanshin. "Design investigations of turbojets using fuel cooling capacity for the 1st stage of TSTO aerospace system." In 9th International Space Planes and Hypersonic Systems and Technologies Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1999. http://dx.doi.org/10.2514/6.1999-4842.
Full textLiu, Teng, Weiguo Gao, Guanwei Zhang, Dawei Zhang, and Yifan Zhang. "Supply Power Design of Oil Cooling Strategies for Precision Ball Screw Unit." In ASME 2015 International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/msec2015-9246.
Full textNiu, Jianlei, and Shuo Zhang. "The Impact of Supercooling on the Effective Cooling Storage Capacity of Phase-Change Materials in Natural Cooling Application." In ASME 2009 Heat Transfer Summer Conference collocated with the InterPACK09 and 3rd Energy Sustainability Conferences. ASMEDC, 2009. http://dx.doi.org/10.1115/ht2009-88637.
Full textLear, William E., ChoonJae Ryu, John F. Crittenden, Aditya Srinivasan, William Ellis, David R. Tiffany, Sherif A. Sherif, and Peter L. Meitner. "System Design of a Novel Combined Cooling, Heat, Power, and Water Microturbine Combined Cycle." In ASME Turbo Expo 2008: Power for Land, Sea, and Air. ASMEDC, 2008. http://dx.doi.org/10.1115/gt2008-51454.
Full text