Relevant bibliographies by topics / Dental materials and equipment

Academic literature on the topic 'Dental materials and equipment'

Author: Grafiati
Published: 10 December 2022
Last updated: 19 February 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Dental materials and equipment.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Dental materials and equipment"

1

Goldschmidt, Stephanie. "Book Review: Small Animal Dental Equipment, Materials, and Techniques." Journal of Veterinary Dentistry 37, no. 2 (June 2020): 100. http://dx.doi.org/10.1177/0898756420951737.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gupta, Vaibhav, and Sachin C. Sarode. "Assessment of Equipment Utilization and Maintenance Schedule at a Dental Institution in Bengaluru, India." World Journal of Dentistry 8, no. 2 (2017): 104–8. http://dx.doi.org/10.5005/jp-journals-10015-1421.

Full text
Abstract:
ABSTRACT Introduction Quality of diagnostic and treatment care provided to patients largely depends on the availability of sophisticated medical equipment. Regular equipment maintenance helps in providing quality care and maintaining utilization coefficient (UC) of the medical equipment. Equipment utilization is the evaluation of medical equipment necessity, appropriateness, and efficiency of the use in diagnosing and treating a patient. If equipment shows UC of more than 50%, it is said to be a good investment. Objective To assess UC of dental institution equipment along with their maintenance schedule to increase operational efficiency. Materials and methods An observational study was conducted at a 250 chaired dental institution in Bengaluru in 2015 to calculate the use coefficient of medical equipment. Maintenance schedule was also recorded for all the equipment. Necessary permissions were obtained before starting the study. Results Around 50% of these medical equipments were underutilized. Only four equipments had preventive maintenance schedule under which services usually provided every 4 months. Most of the equipment did not have any maintenance contract. Conclusion It should be an earnest endeavor of the management and users to optimize the equipment utilization to obtain maximum return on capital invested. In an era of cost-intensive medical care, every equipment being installed in health care institutions need to be fully and properly utilized. Clinical Significance Findings of this study will enable the administrators to ensure that the equipment is in proper working condition to provide optimal patient care. How to cite this article Gupta V, Gupta N, Sarode GS, Sarode SC, Patil S. Assessment of Equipment Utilization and Maintenance Schedule at a Dental Institution in Bengaluru, India. World J Dent 2017;8(2):104-108.
APA, Harvard, Vancouver, ISO, and other styles
3

Kalaiselvi, R., and Revathy Gounder. "Assessing the knowledge of disinfecting dental materials/equipment by dental technicians in Tamil Nadu." Research Journal of Pharmacy and Technology 9, no. 11 (2016): 1937. http://dx.doi.org/10.5958/0974-360x.2016.00397.8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Pandit, AP, Neha Bhagatkar, and Mallika Ramachandran. "Personal Protective Equipment used for Infection Control in Dental Practices." International Journal of Research Foundation of Hospital and Healthcare Administration 3, no. 1 (2015): 10–12. http://dx.doi.org/10.5005/jp-journals-10035-1030.

Full text
Abstract:
ABSTRACT The potential size of India's dental market is vast and is expected to become one of the largest single country markets for overseas dental products and materials. The total market for the dental equipment and materials is estimated to be around US$ 90 million annually. There are more than 1, 80,000 dental professionals in India, 297 dental institutes and over 5,000 dental laboratories. Thus, there is a huge potential for the market of personal protective equipment (PPE) used for infection control in dentistry. India's market for dental products is extremely dynamic, with a current estimated growth rate of between 25 and 30%. Overall, the dental market is expected to grow by 20%.1 The personal protective equipment used in the practice of dentistry in India. Since dentistry is predominantly a surgical discipline, it leads to exposure to the pathogenic microorganisms harbored in blood, body fluids and other potentially infectious material. Thus, the use of adequate and good quality PPE is imperative for infection control in dental practice. With the growing potential of India's dental market, the growth of the market for PPE is inevitable. But, it is equally important to raise the awareness among dental community about good quality products adhering to required standards to prevent the usage of low-cost, uncertified and sub-standard products that decrease the safety levels of personnel. The present study is conducted with a view to observe the personal protective equipment used for infection control in dental practices. How to cite this article Pandit AP, Bhagatkar N, Ramachandran M. Personal Protective Equipment used for Infection Control in Dental Practices. Int J Res Foundation Hosp Healthc Adm 2015;3(1):10-12.
APA, Harvard, Vancouver, ISO, and other styles
5

Checchi, Vittorio. "Special Issue on Dental Materials: Latest Advances and Prospects." Applied Sciences 12, no. 17 (September 2, 2022): 8833. http://dx.doi.org/10.3390/app12178833.

Full text
Abstract:
Most fields of dentistry are closely related to newly developed materials, and all clinical improvements often follow or, in any case, go hand in hand with the creation and development of innovative and higher-performing materials, instruments, and equipment [...]
APA, Harvard, Vancouver, ISO, and other styles
6

Wirwicki, Mateusz, and Tomasz Topoliński. "Shear Strength Testing of Bonded Joints of Dental Materials." Solid State Phenomena 224 (November 2014): 198–203. http://dx.doi.org/10.4028/www.scientific.net/ssp.224.198.

Full text
Abstract:
Zirconium dioxide is a material more and more used by technicians and dental surgeons due to its chemical composition and excellent mechanical strength. It features high biocompatibility and may be used even in 6-unit fixed dental bridges. Adhesive bonding is one of the methods used in dental applications. New generation bonding agents featuring high mechanical strength are widely available on the market. This article presents the equipment designed and manufactured to European Standards for bonded joint testing as well as specimen geometry and bonding method. Monotonic and fatigue tests of bonded joints were performed, the results were presented and Weibull analysis was performed.
APA, Harvard, Vancouver, ISO, and other styles
7

Rafelt, John. "Surgical Masks and Filtering Facepiece (FFP) Respirators – a Guide." Dental Update 47, no. 7 (July 2, 2020): 560–64. http://dx.doi.org/10.12968/denu.2020.47.7.560.

Full text
Abstract:
As the dental profession return to practice following the recent lockdown caused by the COVID-19 pandemic, the correct use of personal protective equipment (PPE) will be essential to comply with Government guidelines and help prevent further spread of the coronavirus. At the time of writing, it is understood that a person may carry COVID-19 and be asymptomatic for a period of time, therefore proper protection for both the patient and the dental professional is critical if dental practices are to continue practising safely. CPD/Clinical Relevance: A good understanding of PPE will be essential when dental staff return to work. The way we do dentistry will be different for some time, requiring changes to our equipment, materials and procedures.
APA, Harvard, Vancouver, ISO, and other styles
8

Kawamoto, Luiz Teruo, Waltraudi Orchulhak Kawamoto, Alexandre Formigoni, Enio Fernandes Rodrigues, Ivan Pérsio de Arruda Campos, and Silvia Cristina Martini Rodrigues. "Quality Comparison of Analog and Digital X-Ray Equipment and Materials in a Dental Clinic." Key Engineering Materials 660 (August 2015): 330–34. http://dx.doi.org/10.4028/www.scientific.net/kem.660.330.

Full text
Abstract:
Many dental clinics are swapping analog x-ray equipment for digital systems to obtain medical images in the search for improvements such as reduced costs and better care of the images and fast response. However it is necessary to analyze if the digital images have quality requirements in order to provide the diagnosis in a similar or superior way to the analog films. The objective of this paper is to analyze the quality of the digitized x-ray diagnostic images in relation to the structures represented. The research was conducted in a dental clinic that was changing the analog x-ray equipment for one digital. The results by means of statistical analysis demonstrated that the digital system has better spatial resolution and better contrast. As a suggestion of future research an analysis by dentists to see if on the day of the clinic, these theoretical advantages are confirmed in better diagnostics.
APA, Harvard, Vancouver, ISO, and other styles
9

Hamzeh, Mahtab, Mohammad Mehdizadeh, and Kamran Nosrati. "Availability of Emergency Drugs and Equipment in General and Specialist Dental Settings in Babol, Iran." Journal of Contemporary Dental Practice 15, no. 6 (2014): 677–80. http://dx.doi.org/10.5005/jp-journals-10024-1598.

Full text
Abstract:
ABSTRACT Aim Medical emergencies can frequently happen in dental settings and it is critical to outfit the clinic by emergency drugs and equipment. The aim of this study was to evaluate the emergency drugs and equipment in general and specialist dental settings in Babol, Iran. Materials and methods A questionnaire containing closed ended questions about the available emergency drugs and equipment was used in this descriptive-analytical study. Data were subjected to descriptive analysis using SPSS 18.0 to identify the most frequent drugs and equipment. Chi-square and t-test were used to evaluate the correlation between the variables. p < 0.05 was considered statistically significant. Results One hundred and twelve dentists answered the questionnaire. The most available drug and equipment were epinephrine (67%) and single use syringe (81.3%) respectively. Significant correlation was found between degree of education and availability of first group of emergency drugs and between sex and possession of second group of emergency equipment (p < 0.05). Conclusion Degree of availability of emergency drugs and equipment was moderate to low and training about emergencies should be included in the didactic topics of universities and workshops. Clinical significance Information about emergency drug and equipment would help to manage the unwanted emergency situations. How to cite this article Mehdizadeh M, Nosrati K, Hamzeh M. Availability of Emergency Drugs and Equipment in General and Specialist Dental Settings in Babol, Iran. J Contemp Dent Pract 2014;15(6):677-680.
APA, Harvard, Vancouver, ISO, and other styles
10

Monaghan, Liam, and Richard Needham. "An overview of light-curing within orthodontics." Orthodontic Update 16, no. 1 (January 2, 2023): 28–31. http://dx.doi.org/10.12968/ortu.2023.16.1.28.

Full text
Abstract:
The use of light to initiate bonding reactions has become an integral part of orthodontic practice. Different technologies are available to cure dental composite, each with advantages and drawbacks. The efficacy of light-curing is affected by a range of factors and it is important for orthodontists to understand these concepts, alongside common problems with light-cure units, to aid in troubleshooting. Periodic testing of light-curing equipment can help to identify defective units that can potentially contribute to bond failure. CPD/Clinical Relevance: An understanding basic materials science in relation to dental light-curing technology is important in allowing orthodontists to maintain safe and effective equipment. The choice of light-curing equipment and method of use can influence bond strength and, therefore, treatment success.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Dental materials and equipment"

1

Damodara, Eswar Keran C. "Clinical trial to determine the accuracy of prefabricated trays for making alginate impressions." Thesis, Birmingham, Ala. : University of Alabama at Birmingham, 2008. https://www.mhsl.uab.edu/dt/2009r/damodara.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Pinto, Flávia Morais Gomes. "Desinfecção das canetas de alta rotação com álcool 70% p/v sem limpeza prévia: avaliação do risco de infecção cruzada." Universidade de São Paulo, 2013. http://www.teses.usp.br/teses/disponiveis/7/7139/tde-20092013-091255/.

Full text
Abstract:
Introdução: Na prática clínica odontológica, justificada pela praticidade, tempo curto disponível entre os atendimentos, associados à insuficiente previsão e provisão das Canetas de Alta Rotação (CAR), a descontaminação destas por meio de aplicação direta do álcool 70% p/v, sem limpeza prévia, é uma realidade. Este procedimento contraria, a priori, os protocolos de processamento que recomendam, no mínimo, limpeza seguida de desinfecção de alto nível para prevenção de infecção cruzada. Objetivo: avaliar a desinfecção das CAR com álcool 70% p/v, sem limpeza prévia com vistas ao risco de causar infecção cruzada. Método: caracterizou-se como uma pesquisa pragmática em um Estabelecimento Odontológico, onde rotineiramente as práticas de interesse para o estudo estavam presentes. O grupo experimental foi composto por 100 amostras de CAR utilizadas em tratamentos diversos, após a fricção do desinfetante por 90 segundos em sua superfície externa. Para avaliação dos resultados, uma gaze umedecida com soro fisiológico foi utilizada como carreador para o arraste dos possíveis micro-organismos nas superfícies desinfetadas. Metade do número das amostras (50) foi analisada pelo método de filtração por membrana (Método I - quantitativo), sendo cada gaze imersa em 300 mL de solução fisiológica. Sequencialmente, as amostras foram expostas a sonicação e agitação. Em seguida, o lavado foi filtrado em três partes iguais para diferentes análises (micro-organismos aeróbios, anaeróbios e específicos da microbiota oral humana), por meio da membrana com porosidade de 0,45 m. As outras 50 amostras foram analisadas pelo método de imersão direta da gaze em meio de cultura Fluid Thioglycollate Medium (Método II qualitativo). O tubo contendo a gaze foi agitado e incubado a 37ºC por 21 dias. Resultados: as amostras analisadas pelo Método I apresentaram crescimento positivo em 27/50 (54%) das amostras na faixa de 100 a 102 UFC/amostra. Deste total, foram identificados sete micro-organismos distintos, representados por 37,1% do Staphylococcus coagulase negativa, 28,5% dos Bacillus spp, 17,1% dos Bacilo Gram positivos não esporulados, 5,7% dos Micrococcus spp, 5,7% dos Penicillium spp, 2,8% Acinetobacter baumannii e 2,8% da Candida spp. No grupo analisado pelo Método II, o total de tubos com crescimento positivo foi de 12/50 (24%) amostras. Deste total, foram identificados três micro-organismos distintos, sendo 38,4% de Bacilos Gram positivos inespecíficos, seguidos dos Staphylococcus spp e Peptococcus spp com a mesma porcentagem de positividade de 30,7% cada. O grupo controle negativo, composto por amostras submetidas à limpeza e esterilização consecutiva, apresentaram resultados satisfatórios de ausência microbiana na totalidade das amostras. O crescimento médio encontrado no grupo controle positivo foi de 17,5 UFC/placa, com exceção de uma amostra que apresentou crescimento incontável. Conclusão: os resultados da presente investigação reprovam a prática da descontaminação das CAR com álcool 70% p/v, sem limpeza prévia, substanciada pela sobrevivência de micro-organismos que não corresponderam à ação fungicida e bactericida esperada do álcool 70% p/v na condição de desinfetante de nível intermediário. Outro aspecto que reforça a reprovação da prática analisada é a consideração de que os micro-organismos recuperados, mesmo sendo de baixo potencial patogênico, podem comportar-se como anfibiontes, isto é, são capazes de agredir o hospedeiro quando as condições ambientais e imunológicas são favoráveis aos micro-organismos, causando infecção.
Introduction: In dental clinical practice, decontamination of high-speed dental equipment (HSDE) by direct use of 70% ethanol without previous cleaning, justified by practicality, the short-time available between appointments, together with inadequate predicting and provision of HSDE, is a reality. This procedure, a priori, contradicts the processing protocols recommended to prevent cross-infection. Objective: to evaluate the disinfection of HSDE with 70% ethanol without previous cleaning, with views of cross-infection risk. Method: the present study was characterized as a pragmatic research in a Dental Office, which practices of interest to the study were routinely performed. The experimental group consisted of 100 samples of HSDE used in different treatments after rubbing the disinfectant for 90 seconds on its outer surface. To evaluate the results, gauze moistened with saline solution was used as a carrier for obtaining microorganisms from the disinfected surfaces. Half of the samples (50) were analyzed by membrane filtration (Method I - quantitative), with the gauze being immersed in 300 mL of saline solution. Sequentially, the sample was exposed to sonication and agitation. After that, the lavage was filtered in three equal parts for different analyses, through a membrane with 0.45 m porosity and seeded on blood agar culture medium, for recovery of aerobic and anaerobic microorganisms, as well as those specifically found in the human oral microbiota. The other 50 samples were analyzed by direct immersion of the gauze in culture medium (Method II - Qualitative): after rubbing the wet gauze on the outer surface of the HSDE, it was placed directly in Fluid Thioglycollate culture medium. The tube containing the gauze was shaken in a vortex mixer and then incubated at 37 ° C for 21 days. Results: samples analyzed by Method I, showed positive growth in 27/50 (54%) of the samples within the range of 100 to 102 CFU/sample. Of this total, 7 different microorganisms were identified, represented by 37.1% of coagulase-negative Staphylococcus, 28.5% of Bacillus spp, 17.1% of non-sporulating Gram-positive bacillus, 5.7% of Micrococcus spp, 5.7 % of Penicillium spp, 2.8% of Acinetobacter baumannii and 2.8% of Candida spp. In the group analyzed by Method II, the total number of tubes with positive growth was 12/50 (24%) samples. Of this total, we identified 2 different microorganisms, being 38.4% of Gram-positive bacillus nonspecific, followed by Staphylococcus spp and Peptococcus spp with the same percentage of positivity of 30.7% each. The negative control group, composed of samples subjected to cleaning and sterilization consecutive showed satisfactory results. The average growth found in the positive control group was 17.5 CFU/sample, except for one sample that showed growth uncountable. Conclusion: the results of the present study do not support the practice of decontamination of HSDE with 70% ethanol without previous cleaning, based on the evidence of microorganism survival that did not meet the expected bactericidal and fungicidal action of alcohol as an intermediate level disinfectant. Another aspect that reinforces the disapproval this practice, it is the consideration that the micro-organisms recovered, even being low pathogenic potential, may behave as anfibionte, which are capable of harming the host when the environmental and immune conditions are favorable to micro-organisms, causing infection.
APA, Harvard, Vancouver, ISO, and other styles
3

Wassell, Robert Walter. "Composites for making dental inlays." Thesis, University of Newcastle Upon Tyne, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.385649.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ogden, Jill. "New dental materials." Thesis, Teesside University, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.411012.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gordon, Asia A. "Restorative dental materials." Thesis, Boston University, 2012. https://hdl.handle.net/2144/12399.

Full text
Abstract:
Thesis (M.A.)--Boston University PLEASE NOTE: Boston University Libraries did not receive an Authorization To Manage form for this thesis or dissertation. It is therefore not openly accessible, though it may be available by request. If you are the author or principal advisor of this work and would like to request open access for it, please contact us at open-help@bu.edu. Thank you.
Restorative dentistry restores the function of the teeth and their surrounding structures. Patients may need dental restorative procedures due to disease, trauma, and esthetics purposes. The most prevalent dental disease is caries, which is treated by the removal of bacteria and the placement of a restorative material. This thesis aims to determine if the use of amalgam restoration should be discontinued in the United States. To determine if dental amalgam restorations should be discontinued the safety and of amalgam, composite, and ceramic materials will be evaluated. The objective is to review the current literature to determine if the use of amalgam is unethical and if composite and ceramic restorations can serve as a proper alternative. Restorative materials have been used for over 170 years and the contents in these materials have been very controversial. The first record of amalgam placement was in 659 AD in China through Material Medica. Since then, new advancements and different compositions have varied to increase the efficacy of amalgam restorations. Composite restorations became popular in the early 1960's and have drastically improved and are now comparable in compressible strength to amalgam restorations and are placed in posterior teeth. Porcelain, ceramics has been used in dentistry since the 1800's and has advanced through fabrication and cementation techniques. One fabrication technique of interest is the utilization of CEREC CAD/CAM systems. This system has also evolved and is now on its third generation; its original design included fabricated inlays and onlays only. Now, The CAD/CAM has evolved to fabricate inlays, onlays, crowns, and veneers. The use of dental amalgam has been shown through many studies to be safe and has an unmatched longevity record. Composites and porcelain ceramics are also successful to varying degree but do not have the longevity found with amalgam. These studies, demonstrates the use of amalgam in the United States is ethical, successful, cost effective, and should not be discontinued.
APA, Harvard, Vancouver, ISO, and other styles
6

Eriksson, Alexander. "Bioactivity testing of dental materials." Thesis, Uppsala universitet, Tillämpad materialvetenskap, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-382042.

Full text
Abstract:
Ever since Hench et al. first discovered bioactive glass in 1969, extensive interest was created because of the materials ability to chemically bond with living tissue. In this project the bioactivity of three different compositions of the bioactive glass Na2O-CaO-SiO2 have been studied. The compositions of the different glasses were A (25% Na2O, 25% CaO and 50% SiO2), B (22.5% Na2O, 22.5% CaO and 55% SiO2) and C (20% Na2O, 20% CaO and 60% SiO2). Their bioactivity was tested through biomimetic evaluation, in this case by soaking samples of each glass in simulated body fluid (SBF) and phosphate buffered saline (PBS). After soaking, the samples were analyzed with Scanning Electron Microscopy (SEM), Energy-Dispersive X-ray Spectroscopy (EDS), Grazing Incidence X-ray Diffraction (GIXRD) and Fourier-Transform Infrared Spectroscopy (FTIR) to analyze if hydroxyapatite formed on the glass surfaces. Both the A and B glass showed bioactivity in SBF and PBS, while the C glass did not. Further work is necessary to determine which of the A and B glass has the highest apatite formability and the reason why the C glass were not bioactive.
APA, Harvard, Vancouver, ISO, and other styles
7

Lawson, Nathaniel C. "Mechanical properties of dental impression materials." Birmingham, Ala. : University of Alabama at Birmingham, 2007. https://www.mhsl.uab.edu/dt/2008r/lawson.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kunzler, Jayson S. (Jayson Scott) 1973. "Order fulfillment model for medical equipment installation materials." Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/89316.

Full text
Abstract:
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering; and, (S.M.)--Massachusetts Institute of Technology, Sloan School of Management; in conjunction with the Leaders for Manufacturing Program at MIT, 2001.
Includes bibliographical references.
by Jayson S. Kunzler.
S.M.
APA, Harvard, Vancouver, ISO, and other styles
9

Horkeby, Filip, and Melanie Larsson. "Quality Assurance of Pressure Equipment Materials and Steelwork." Thesis, Linköpings universitet, Kommunikations- och transportsystem, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-127336.

Full text
Abstract:
Kvalitetskraven i samhället blir allt högre och det blir allt tuffare för producenterna att hålla de kvalitetskrav som krävs av kund, men också att uppnå de kvalitetsdirektiv som finns i EU idag. Det finns idag en mängd olika definitioner på vad kvalitet är och hur kvaliteten ska uppnås. EU kräver att alla produkter ska ha CE-märkning, vilket är en försäkring om att produkterna håller den kvalitet som definierad av EU’s lagstiftning. För att möta de krav som finns på kvalitet idag undersöker Siemens Industrial Turbomachinery AB om deras leverantörer följer de direktiv som krävs för tryckbärande anordningar. För att materialen i de tryckbärande anordningarna ska vara godkända krävs det att ståltillverkaren är godkänd för tillverkningen. Ståltillverkaren ska kunna bekräfta godkännandet genom att uppvisa ett så kallat PED certifikat (Pressure Equipment Directive, 97/23/EC).
APA, Harvard, Vancouver, ISO, and other styles
10

Wang, Yan. "Hertzian indentation failure of dental restorative materials." Click to view the E-thesis via HKUTO, 2005. http://sunzi.lib.hku.hk/hkuto/record/B36528067.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Dental materials and equipment"

1

Bellows, Jan, ed. Small Animal Dental Equipment, Materials and Techniques. Ames, Iowa, USA: Blackwell Publishing, 2004. http://dx.doi.org/10.1002/9780470344873.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Small animal dental equipment, materials, and techniques: A primer. Ames, Iowa: Blackwell Pub., 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Sin, Chae-ŭi. Han'guk ch'ikwa kijajae ŭi yŏksa =: The history of Korean dental materials & equipment. Sŏul-si: Ch'amyun, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Grant, Ellsworth S. The J.M. Ney Company: 1812-1987. Bloomfield, Conn: The Company, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Materials & Processes for Medical Devices Conference (1st 2003 Anaheim, Calif.). Medical device materials: Proceedings from the Materials & Processes for Medical Devices Conference 2003, 8-10 September 2003, Anaheim, California. Materials Park, OH: ASM International, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Council on Dental Materials, Instruments, and Equipment (U.S.). Certification for dental materials, instruments and equipment: Information and procedures : ANSI/ADA specifications. Chicago, Ill: American Dental Association, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

International, ASM, ed. Medical Device Materials VI: Proceedings from the Materials and Processes for Medical Devices Conference, August 8-10, 2011, Hilton Minneapolis, Minneapolis, Minnesota, USA. Materials Park, OH: ASM International, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Council, on Dental Materials Instruments and Equipment (U S. ). Certification programs of the Council on Dental Materials, Instruments and Equipment: Information and procedures : ANSI/ADA specifications. Chicago, Ill: American Dental Association, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

David, Hill. Design engineering of biomaterials for medical devices. Chichester: Wiley, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Vanable, Eleanor D. Using dental materials. Upper Saddle River, N.J: Pearson/Prentice Hall, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Dental materials and equipment"

1

Niemiec, Brook A. "Dental Radiography Equipment." In Practical Veterinary Dental Radiography, 31–41. Boca Raton : CRC Press, [2017]: CRC Press, 2017. http://dx.doi.org/10.1201/b20288-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Isaksson, Marléne. "Dental Materials." In Quick Guide to Contact Dermatitis, 195–204. Berlin, Heidelberg: Springer Berlin Heidelberg, 2016. http://dx.doi.org/10.1007/978-3-662-47714-4_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Isaksson, Marléne. "Dental Materials." In Contact Dermatitis, 763–91. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-03827-3_39.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Helsen, Jozef A., and Yannis Missirlis. "Dental Materials." In Biological and Medical Physics, Biomedical Engineering, 191–217. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-12532-4_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bhat, Sujata V. "Dental Materials." In Biomaterials, 194–206. Dordrecht: Springer Netherlands, 2002. http://dx.doi.org/10.1007/978-94-010-0328-5_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Liu, Feng, Shan Jiang, and Mingming Xu. "Devices and Equipment of the Dental Photography." In Dental Digital Photography, 43–78. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-1622-7_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Braden, Michael, Richard L. Clarke, Sandra Parker, and John Nicholson. "Elastomeric Materials." In Polymeric Dental Materials, 91–124. Berlin, Heidelberg: Springer Berlin Heidelberg, 1997. http://dx.doi.org/10.1007/978-3-642-60537-6_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bergmann, Carlos P., and Aisha Stumpf. "Microstructure of Ceramic Materials." In Dental Ceramics, 31–44. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-38224-6_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Black, Jonathan, and Garth Hastings. "Dental Restoration Materials." In Handbook of Biomaterial Properties, 201–13. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5801-9_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Reza Rezaie, Hamid, Hassan Beigi Rizi, Mojdeh Mahdi Rezaei Khamseh, and Andreas Öchsner. "Dental Restorative Materials." In Advanced Structured Materials, 47–171. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-48931-1_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Dental materials and equipment"

1

Grisimov, Vladimir N., Alexander V. Smirmov, and Sergey C. Stafeev. "Laser equipment for investigation of light distribution in dental tissues and restorative materials." In International Symposium on Intensive Laser Actions and Their Applications and Laser Applications Engineering, edited by Vadim P. Veiko. SPIE, 1997. http://dx.doi.org/10.1117/12.271790.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Dabrowski, M., R. Dulski, S. Zmuda, and P. Zaborowski. "Emission properties of dental materials and hard dental tissues." In 2000 Quantitative InfraRed Thermography. QIRT Council, 2000. http://dx.doi.org/10.21611/qirt.2000.003.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Yanenko, A. P., S. N. Peregudov, A. D. Golovchanskaya, and A. D. Krasiuk. "Electromagnetic identification of dental materials." In 2010 20th International Crimean Conference "Microwave & Telecommunication Technology" (CriMiCo 2010). IEEE, 2010. http://dx.doi.org/10.1109/crmico.2010.5632951.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Matsibura, A. P., S. N. Peregudov, A. P. Janenko, and A. D. Golovchanskaya. "Microwave estimation of dental materials." In 2005 15th International Crimean Conference Microwave and Telecommunication Technology. IEEE, 2005. http://dx.doi.org/10.1109/crmico.2005.1565194.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

OCELÍK, VÁCLAV, ULF SCHEPKE, HAMID HAJI RASOUL, MARCO S. CUNE, and JEFF TH M. DE HOSSON. "SURFACE DEGRADATION OF NANOCRYSTALLINE ZIRCONIA DENTAL IMPLANTS." In MATERIALS CHARACTERISATION 2017. Southampton UK: WIT Press, 2017. http://dx.doi.org/10.2495/mc170371.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Dabrowski, M., R. Dulski, P. Zaborowski, and St Zmuda. "Emissivity of the popular dental materials." In 2006 Quantitative InfraRed Thermography. QIRT Council, 2006. http://dx.doi.org/10.21611/qirt.2006.004.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Zinchik, Alexander A., Anna Sharikova, and Sergey C. Stafeev. "Laser-based equipment for investigating fractal structure of dental tissue." In International Symposium on Intensive Laser Actions and Their Applications and Laser Applications Engineering, edited by Vadim P. Veiko. SPIE, 1997. http://dx.doi.org/10.1117/12.271789.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Susila, V., C. V. Subba Rao, and F. D. Gnanam. "STUDY OF FELDSPATHIC DENTAL PORCELAIN." In Processing and Fabrication of Advanced Materials VIII. WORLD SCIENTIFIC, 2001. http://dx.doi.org/10.1142/9789812811431_0023.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Conde-Contreras, M., V. Tiessler, A. Cucina, P. Quintana, and Juan J. Alvarado-Gil. "Analysis of dental materials by photothermal radiometry." In Merida - DL Tentative, edited by R. Rodriguez-Vera and F. Mendoza-Santoyo. SPIE, 2005. http://dx.doi.org/10.1117/12.611776.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Rawicz, Andrew H., Ivan Melnyk, and Pawel Kowalski. "Translucency measurements in teeth and dental materials." In Biomedical Optics 2003, edited by Peter Rechmann, Daniel Fried, and Thomas Hennig. SPIE, 2003. http://dx.doi.org/10.1117/12.500135.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Dental materials and equipment"

1

Kwan, Alexander, Hung Ching, Richard Massoth, W. Doss McDavid, Enrique Platin, Leonard Rosenstein, Anthony Seibert, J. Anthony White, and Joel Gray. Acceptance Testing and Quality Control of Dental Imaging Equipment. AAPM, September 2016. http://dx.doi.org/10.37206/160.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hwang, Yoon Y., Jonathan M. Stahl, and Wayne M. Deutsch. Testing of DentStat (trademark) and Competing Dental Materials. Fort Belvoir, VA: Defense Technical Information Center, June 2014. http://dx.doi.org/10.21236/ada604226.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

none,. Roadmap for Process Equipment Materials Technology. Office of Scientific and Technical Information (OSTI), October 2003. http://dx.doi.org/10.2172/1218705.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Elmore, M. R., and G. A. Jensen. Materials selection for process equipment in the Hanford waste vitrification plant. Office of Scientific and Technical Information (OSTI), July 1991. http://dx.doi.org/10.2172/5528598.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Jenssen, H. Equipment for Diode Laser Pumping of New and Improved Optical Materials. Fort Belvoir, VA: Defense Technical Information Center, May 1999. http://dx.doi.org/10.21236/ada380041.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Rossman, Grant Andrew, Isaac C. Avina, and Bradley Alexander Steinfeldt. Observations Regarding Commonly Available Materials for Face Shield Emulated-Personal Protective Equipment. Office of Scientific and Technical Information (OSTI), April 2020. http://dx.doi.org/10.2172/1616234.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Rossman, Grant Andrew, Isaac C. Avina, and Bradley Alexander Steinfeldt. Observations Regarding Commonly Available Materials for Face Covering Emulated-Personal Protective Equipment. Office of Scientific and Technical Information (OSTI), April 2020. http://dx.doi.org/10.2172/1616235.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Rafferty, K. D. A materials and equipment review of selected US geothermal district heating systems. Office of Scientific and Technical Information (OSTI), July 1989. http://dx.doi.org/10.2172/5620754.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

JENNINGS, T. L. Work Flow Analysis Report Consisting of Work Management - Preventive Maintenance - Materials and Equipment. Office of Scientific and Technical Information (OSTI), December 1999. http://dx.doi.org/10.2172/798839.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Dikkers, Robert D., and Belinda C. Reeder. Standards for building materials, equipment and systems used in detention and correctional facilities. Gaithersburg, MD: National Bureau of Standards, 1987. http://dx.doi.org/10.6028/nbs.ir.87-3687.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Dental materials and equipment' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography