Dissertations / Theses on the topic 'Cyclopropane Ring'

Activated cyclopropanes have been extensively used in synthetic chemistry as precursors for cycloaddition reactions. The rationale behind this is their ability to undergo ring-opening when activated by a Lewis acid, this can be enhanced further by the presence of a carbocation stabilising group like electron-rich aromatics. The stabilised dipole formed after ring opening can be trapped with suitable electrophiles such as imines and aldehydes via a [3+2] cycloaddition reaction. This results in the synthesis of pyrrolidines and tetrahydrofurans in excellent yields but moderate diastereoselectivity. Similarly, 6-membered heterocycles can be formed via a [3+3] cycloaddition reaction of activated cyclopropanes with nitrones. Now to extend the scope of the methodology, a [3+3] dipolar cycloaddition has been developed using activated 2,3 disubstituted cyclopropane diesters to access a range of highly functionalised oxazines in moderate to good yields (50-75%) and with reasonable diastereoselectivity. The use of activated symmetrical disubstituted cyclopropanes afforded the desired oxazines in a regio- and diastereocontrolled manner, while the use of unsymmetrical cyclopropanes significantly reduced the diastereoselectivity of the reaction. The stereochemistry outcome of the reaction developed was determined by nOe analyses and X-ray diffraction structures could be recorded in some examples. A new methodology has also been developed to gain access to novel N-heterocyclic- and phenol- substituted cyclopropanes in one step from the corresponding cyclopropene via a conjugated addition.

Donor-Acceptor tetramethylenes have been studied by polymerizations. 1,4-Zwitterionic intermediates are indicated when reactive tetramethylenes initiate homopolymerization. Alternately, 1,4-diradical intermediates initiate copolymerization. This basis for studying intermediates has led to an empirical table for predicting the zwitterionic and diradical nature of addition and polymerization reactions of tetramethylenes. Here we attempted to extend this work to trimethalylenes by studying the thermal ring opening of ethyl chrysanthemate, ethyl 1-cyano-2-(4-methoxyphenyl)-cyclopropane-corboxylate, ethyl 1-cyano-2-(2-methoxyphenyl)-cyclopro-panecroboxylate, and diethyl 1,3-dicyano-w,r-di(2-methoxyphenyl)-cyclobutanedicarboxylate. These compounds were found to be thermally stable to 150°C and did not initiate polymerization in styrene, methyl methacrylate, a series of high boiling acrylates, and dimethyl fumarate. Free radicals were trapped in dimethyl fumarate to give oligomers at temperatures above 110°C. Even though the compounds studied did not initiate polymerization at decomposition temperatures of 175°-200°C, dimethyl fumarate may prove useful in these studies in the future.

Nature’s biodiversity is complex and filled with beauty and wonder which are all observable on the macroscopic scale. This exquisiteness of nature’s intricacies are mirrored on the molecular level such that substances, large or small, are assembled to serve as signaling molecules, protective agents, and fundamental composites of higher-order frameworks for the operation and survival of life. Over the years, chemists have isolated and synthesized these molecules, known as natural products, to understand and evaluate their functions in biology and potential for medicinal applications. Although bioactive natural products demonstrate medicinal promise, poor pharmacological effects require further derivatization because semisynthesis is not sufficient to refine adverse pharmacokinetics. For some active molecules, isolation results in poor yields. In addition to small quantity isolation, many natural products, reflecting the immense complexity of biology itself, pose difficult synthetic challenges to organic chemists because of skeletal heterogeneity, stereochemical complexity, and substitution divergence. As a result of these synthetic obstacles to natural product utilization, improvements are needed in current chemical approaches, and new innovative methodologies for synthesis and chemical space exploration are necessary. Pharmaceutically relevant frameworks, natural products, and synthetic biologically active molecules are comprised of polycarbocyclic and heterocyclic scaffolds. Traditionally, cycloadditions, transannular transformations, and annulation reactions serve as powerful methods for polycyclic formation. In order to assemble diverse polycycles, donor-acceptor cyclopropanes are useful, versatile synthetic equivalents for C-C bond formations. By taking advantage of the strain within these unique, polarized systems, differing molecular architectures can be accessed directly to perform contemporary organic synthesis. Moreover, the donor-acceptor cyclopropanes initially utilized in these studies provided a fundamental basis for new methods to synthesize other relevant scaffolds. Unique, efficient, Lewis acid-catalyzed intramolecular cyclization strategies for the construction of functionalized polycycles using Friedel-Crafts-type alkylation sequences are presented to expand the reaction repertoire of the molecular architect. Generally, products were formed from commercially-available starting materials in high yields with broad scope. The methodologies were demonstrated to be modular, operationally simple, and amenable to different substitution patterns and functional groups to afford tetrahydroindolizines, heteroaromatic cyclohexenones, hydropyrido[1,2-a]indoles, pyrrolo[1,2-a]indoles, pyrrolo[3,2,1-ij]quinolines, pyrrolizines, and tetrahydrobenzo[ij]quinolizines. To demonstrate the utility of the methodologies devised, progress toward, (±)-rhazinicine, a natural product, is discussed. This dissertation is organized into six chapters: (1) an introduction, paradoxical stress and molecular strain’s utility in synthesis; (2) annulation reactions for the formation of heteroaromatic cyclohexenones; (3) hydropyrido[1,2-a]indole formation via an In(III)-catalyzed cyclopropane ring-opening/Friedel-Crafts alkylation sequence; (4) tetrahydroindolizine formation and progress toward the total synthesis of (±)-rhazinicine (5) pyrrolo[1,2-a]indole synthesis using a Michael-type Friedel-Crafts cyclization approach; and (6) a versatile protocol for the intramolecular formation of functionalized pyrrolo[3,2,1-ij]quinolines.

The recent upsurge of degenerative diseases believed to be the result of oxidative stress has sparked an increased interest in utilizing the fundamental principles of physical organic chemistry to understand biological problems. Enzyme pathways can pose several experimental complications due to their complexity, therefore the small molecule probe approach can be utilized in an attempt understand the more complex enzyme mechanisms. The work described in this dissertation focuses on the use of N-cyclopropyl amines that have been used as probes to study the mechanism of monoamine oxidase (MAO) and cytochrome P-450 (cP-450). A photochemical model study of benzophenone triplet (3BP) with the MAO-B substrate 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP) and two of itâ s derivatives, 1-cyclopropyl-4-phenyl-1,2,3,6-tetrahydropyridine and (+/-)-[trans-2-phenylcyclopropyl-4-phenyl-1,2,3,6-tetrahydropyridine is presented in Chapter 2. The barrier for ring opening of aminyl radical cations derived from N-cyclopropyl derivatives of tertiary amines (such as MPTP) is expected to be low. Reactions of 3BP with all three compounds are very similar. The results suggest that the reaction between benzophenone triplet and tertiary aliphatic amines proceed via a simple hydrogen atom transfer reaction. Additionally these model examinations provide evidence that oxidations of N-cyclopropyl derivatives of MPTP catalyzed by MAO-B may not be consistent with a pure SET pathway. The chemistry of N-cyclopropyl amines has been used to study the mechanism of amine oxidations by cP-450. Until recently, the rate constant for these ring opening reactions has not been reported. Direct electrochemical examinations of N-cyclopropyl-N-methylaniline showed that the radical cation undergoes a unimolecular rearrangement consistent with a cyclopropyl ring opening reaction. Examination of both the direct and indirect electrochemical data showed that the oxidation potential N-cyclopropyl-N-methylaniline to be +0.528 V (0.1 M Ag+/Ag), and rate constant for ring opening of 4.1 x 10⁴ s^-1. These results are best explained by two phenomena: (i) a resonance effect in which the spin and charge of the radical cation in the ring closed form is delocalized into the benzene ring hindering the overall rate of the ring opening reaction, and/or (ii) the lowest energy conformation of the molecule does not meet the stereoelectronic requirements for a ring opening pathway. Therefore a new series of spiro cyclopropanes were designed to lock the cyclopropyl group into the appropriate bisected conformation. The electrochemical results reported herein show that the rate constant for ring opening of 1'-methyl-3',4'-dihydro-1'H-spiro[cyclopropane-1,2'-quinoline] and 6'-chloro-1'-methyl-3',4'-dihydro-1'H-spiro[cyclopropane-1,2'-quinoline] are 3.5 x 10² s^-1 and 4.1 x 10² s^-1 with redox potentials of 0.3 V and 0.366 V respectively. In order to examine a potential resonance effect a derivative of N-methyl-N-cyclopropylaniline was synthesized to provide a driving force for the ring opening reaction thereby accelerating the overall rate of the ring opening pathway. The electrochemical results show that the rate constant for ring opening of 4-chloro-N-methyl-N-(2-phenylcyclopropyl)aniline to be 1.7 x 10⁸ s^-1 . The formal oxidation potential (E°OX) of this substrate was determined to be 0.53 V. The lowered redox potentials of 1'-methyl-3',4'-dihydro-1'H-spiro[cyclopropane-1,2'-quinoline] and 6'-chloro-1'-methyl-3',4'-dihydro-1'H-spiro[cyclopropane-1,2'-quinoline] can be directly attributed to the electron donating character of the ortho alkyl group of the quinoline base structure of these spiro derivatives, and therefore the relative energy of the ring closed radical cations directly affects the rate of ring opening reactions. The relief of ring strain coupled with the formation of the highly resonance stabilized benzylic radical explains the rate increase for the ring opening reaction of 4-chloro-N-methyl-N-(2-phenylcyclopropyl)aniline.
Ph. D.

La base phosphazène ButP4 associée au thiophénol ou au bis (2-mercaptoéthyl) éther a été utilisée avec succès pour amorcer quantitativement la polymérisation anionique par ouverture de cycle des monomères cyclopropane-1,1-dicarboxylates de dialkyle. Pour des températures comprises entre 30 et 60°C dans le THF ou entre 30 et 100°C dans le toluène, le mécanisme observé est celui d'une polymérisation anionique vivante qui conduit à des polymères présentant des indices de polymolécularité faibles et dont les Mn expérimentaux (mesurés par SEC et RMN 1H) sont en accord avec les valeurs théoriques. D'autres systèmes d'amorçage comme le carbazole ou des composés possédant un proton acide associés à ButP4 conduisent également à des polymères bien définis. Une étude cinétique montre que l'ordre interne en monomère est égal à 1 sur l'ensemble de la gamme de conversion. Le système d'amorçage thiophénol / ButP4 dans le THF présente une réactivité bien supérieure à celle du thiophénolate de sodium dans le DMSO qui est le système classique d'amorçage pour ce type de polymérisation. Différents agents de terminaison, comme l'acide chlorhydrique, le bromure d'allyle ou le bromure de propargyle, ont été utilisés pour terminer les réactions et ont conduit à l'obtention de polymères hétérotéléchéliques. D'autres dérivés de cyclopropanes présentant des substituants variés ont également été examinés. Ces résultats ouvrent de très intéressantes perspectives dans la préparation d'architectures complexes comme des copolymères à blocs, greffés ou en étoile. Les premières expériences de copolymérisation ont d'ailleurs été couronnées de succès. Afin d'obtenir de nouveaux canaux ioniques artificiels, différents monomères cyclopropane-1,1- dicarboxylates porteurs d'éthers-couronne ont été synthétisés. La polymérisation anionique par ouverture de cycle de ceux-ci a été étudiée en utilisant soit le thiophénolate de sodium soit le système thiophénol / ButP4 comme amorceur. Ces travaux ont également permis l'obtention d'un nouveau type de poly(éther-ester) qui s'est révélé intéressant comme perméabilisant membranaire. Les interactions des oligo(éther-ester)s avec des membranes modèles planes, des vésicules unilamellaires et des cellules ont été étudiées en collaboration avec des physiciens et des biologistes. Des résultats prometteurs en termes de transport d'ions ont été obtenus et sont présentés dans ce mémoire

Over the past decades, functional group manipulation of aromatic precursors has been a common strategy to access new aromatic compounds. However, these classical methods, such as Friedel-Crafts alkylations and electrophilic/nucleophilic aromatic substitutions, have shown lack of regioselectivity besides the use of activators in excess amounts. To this end, numerous benzannulations to form benzo-fused substrates via Diels-Alder (DA), ring-closing metathesis (RCM), cycloaddition, and transition-metal-promoted processes have been reported. Appending a benzene ring directly onto a pre-existing ring is preferable to many classical methods due to the likely reduction of reaction steps and superior regiocontrol. However, many of these benzannulation reactions require air- and/or moisture- sensitive reaction conditions, a last oxidation step, or the use of highly functionalized precursors. Here we disclose three ‘complementary’ intramolecular ring-opening benzannulations to access a large array of functionalized (hetero)aromatic scaffolds utilizing cyclopropenes-3,3-dicarbonyls, alkylidene cyclopropanes-1,1-diesters, and 2,3-dihydrofuran O,O- and N,O- acetals as building blocks. More than 70 benzo-fused aromatic compounds were synthesized using this complementary approach with yields up to 98% and low catalyst loadings. With these benzannulation reactions in hand, we aim to open the synthetic door to a handful of bioactive natural products.

Ce travail decrit des mises au point originales de preparations de pyrrolines et de dihydrofurannes a partir de cyclopropylcetoesters. Ces derniers sont prepares a partir de sels de triphenylphosphonium, precurseurs de derives cyclopropaniques. La reactivite de ces composes cyclopropaniques vis a vis de nucleophiles varies est etudiee. L'action des amines primaires permet d'obtenir des pyrrolines. Une etude biologique montre l'activite biocide des composes prepares

Studies based on radical-induced ring openings of halolactones, spirocyclobutanones, and Rh$\sb2$(OAc)$\sb4$-catalyzed reactions of $\alpha$-diazoketones are described. Novel ring openings and subsequent decarboxylations of iodolactone 66 and bromolactone 67 to give diene 78 were found to proceed under SmI$\sb2$/THF/HMPA (4 equiv) conditions. Upon treatment of iodothialactone 63, iodolactone 66 or bromolactone 67 with SmI$\sb2$/THF/HMPA with "reverse addition" it was found that the ring-opened unsaturated acid 79 was obtained in good yield in each case. The unprecedented ring opening reactions of $\alpha$-ketospirocyclobutanes 123 and 124 with SmI$\sb2$ afforded ketones 126 and 127 in 70% and 88% yield, respectively. Dihydrofurans 217 and 224 were prepared from azibenzil (210) and $\alpha$-diazoketone 223, respectively, via Rh$\sb2$(OAc)$\sb4$-catalyzed reactions with ethyl vinyl ether. The structures of 217 and 224 were rigorously established and the former assignments were corrected. These structures (217 and 224) were unamiguously assigned by characterization of the corresponding transketalization products 222 and 226. Preliminary studies towards the preparation of the novel hydrocarbon-soluble Sm(II) complex 88 are presented. An unprecedented Grob-type fragmentation is postulated to explain the formation of benzyl alcohol from the DIBAL reduction of the donor-acceptor cyclopropane 215. Cyclopropyl alcohol 259 was also produced from this reaction. The characterization of 259 established the intermediacy of donor-acceptor cyclopropanes in the production of dihydrofurans 217 and 224, and suggests that this pathway is more general than the literature implies.$\sp*$ ftn$\sp*$Please refer to the dissertation for diagrams.

Pour la recherche de candidats d’intérêt thérapeutique, l’accès à des systèmes carbonés toujours plus complexes peut se heurter à divers problèmes synthétiques. Afin d’enrichir la diversité structurales, il est nécessaire de pallier aux difficultés synthétiques par le développement de nouveaux outils de synthèse. Dans ce contexte, ce travail s’est principalement orienté sur l’accès de cycles carbonés par des réactions d’expansion de cycle via l’utilisation de composés polarisés. Une première partie est réalisée avec l’utilisation de l’α-chlorodiazoacétate d’éthyle dans la réaction d’expansion de cycle de Tiffeneau-Demjanov pour la synthèse de céto-esters cycliques avec l’incorporation d’un centre tétrasubstitué présentant un atome de chlore. Dans un second temps, le développement d’une réaction de cycloaddition (5+3) à partir de deux entités cyclopropaniques polarisées a été mené au laboratoire. Cette méthodologie a conduit à décrire une nouvelle réactivité des composés cyclopropanes donneurs-accepteurs pour former des lactones α,β,γ-trisubstituées via une activation avec un acide de BrØnsted. Une étude approfondie par des calculs théoriques ont permis d’appréhender le mécanisme réactionnel et la sélectivité de cette transformation. La dernière partie a examinée la réactivité d’une nouvelle classe de molécule : les vinylbiscyclopropanes. Ces composés peuvent conduire à la famille des benzocyclobutènes et aux composés cycliques à 8 chainons par des réactions de réarrangement ou de transposition sigmatropique [3.3] formelle. Ce dernier motif est toujours à l’étude et devrait permettre un accès rapide à de multiples structures carbonées
In the quest for new therapeutic candidates, the description of novel synthetic approaches to access to increasingly complex carbon systems remains a daunting challenge. In order to increase the structural of such scaffolds, it is necessary to overcome the encountered difficulties by developing new straightforward an efficient tools. In this context, this work has mainly focused on the access of structurally defined carbon cycles by ring expansion reactions via the use of polarized compounds. The first part of this study has been devoted to the Tiffeneau-Demjanov ring expansion reaction using ethyl α-chlorodiazoacetate. This approach allowed us to access highly versatile cyclic keto esters displaying a tetrasubstitued carbon center bearing a chlorine atom. The next topic of this study has been focused on the development of a (5 + 3) cycloaddition reaction between two polarized cyclopropane entities. This methodology led to the description of a novel reactivity of donor-acceptor cyclopropanes compounds to form α,β,γ-trisubstituted lactones under a BrØnsted acid activation. In order to gain mechanistic insights, a theoretical study has also been conducted which led us to rationalize the mechanism and the selectivity of this transformation. The last part described the reactivity of a underexplored class of molecule, the vinylbiscyclopropanes. These compound, can lead to the benzocyclobutene family and to the 8 membered-ring compounds through rearrangement or formal [3.3] sigmatropic rearrangement reaction. This last class of compound is still under study and should allow rapid access to diverse cyclic structures

A catalytic organometallic addition-ring opening sequence of cyclopropenes that enables the efficient and highly stereoselective synthesis of multisubstituted alkenes has been developed. A possible mechanism of organoaluminium reaction is proposed. The metalloenolate resulting from ring opening can be trapped with various electrophiles, enabling a rapid increase in molecular complexity in a one-pot operation. Also, in the presence of stoichiometric magnesium halides, a range of bis-activated cyclopropenes undergo highly stereoselective ring-opening reactions to produce multisubstituted alkenyl halides. The halogen nucleophile promotes Lewis-acid mediated regioselective SNVσ attack at the sp2-carbon of cyclopropene, resulting in the formation of acyclic conjugate enolate, which can be trapped with enones to furnish more highly functionalised products. At last, copper-catalysed asymmetric conjugate reductions of β,β'-disubstituted 2-alkenylheteroarenes are reported. A range of nitrogen-containing aromatic heterocycles are able to provide effective activation of an adjacent alkene for highly enantioselective catalytic conjugate reduction reactions. Extension of the general concept to other classes of heteroarenes has been proven successful. Further manipulation of the condition is required to tolerate more hindered heteroarene substrates.

Small rings are frequently found in natural products as well as incorporated into drugs and agrochemicals in which they impart valuable properties on the biological activity of these compounds. Cyclopropanes are also extremely useful as reagents in organic synthesis, in particular as “umpolung” reagents, allowing access to products which would otherwise be more difficult to synthesise. This thesis will describe forays into the synthesis and further substitution of small rings as well as the iminium-catalysed ring-opening of cyclopropanes. The introduction will outline the uses and properties of cyclopropanes, and will also describe some of the more common ways for incorporating cyclopropanes into larger structures. This will include the Horner–Wadsworth–Emmons procedure which has previously been developed by the group. The second chapter describes efforts towards the iminium-catalysed nucleophilic ring-opening of cyclopropanes. This is followed by Chapter 3, in which the Horner–Wadsworth–Emmons methodology for the synthesis of the cyclopropanes used in Chapter 2 is investigated as a procedure for the synthesis of 4-membered heterocycles. Chapter 4 describes the development of a decarboxylative method for the protodecarboxylation of cyclopropanecarboxylic acids. This was developed as the first step towards decarboxylative cross-coupling of cyclopropanes. Decarboxylative cross-couplings have been extensively developed as environmentally friendly and facile alternatives to the current cross-coupling methods. In Chapter 5 the attempted development of a decarboxylative cross-coupling reaction of cyclopropanes is described. Conclusions and future work are outlined in Chapter 6, followed by the experimental details in Chapter 7.

Ce travail porte sur l'utilisation du palladium (o) pour la synthese de molecules d'interet biologique. En premier lieu, on decrit la synthese stereoselective de cyclopropanes vinyliques et de pyrethrinoides. Dans un second temps, on etudie l'echange acetate phenol et l'amination de derives allyliques fibonctionnels. Enfin, on presente la synthese d'aryl-3 dihydroxy-5,5 oxazolidones-2 erythro et threo et etudie leur utilisation en tant qu'inhibiteur d'enzyme monoamine oxidase

Carbo- and heterocyclic compounds are of great interest to chemists. Intramolecular cyclization strategies of donor-acceptor (D-A) cyclopropanes and alkylidene malonate monoamides have excellent potential for synthesis as they offer easy access to structurally-diverse compounds. The work described in this thesis accesses the scope of the In(OTf)3-catalyzed cyclization reaction of cyclopropanes and alkylidene malonate monoamides. In(OTf)3-catalyzed reactions of alkenyl and heteroaryl cyclopropyl ketones were examined in the synthesis of functionalized cyclohexenone-based derivatives (Chapter 2). Subsequent efforts to utilize a tandem cyclopropane ring-opening/Friedel-Crafts alkylation sequence of methyl 1-(1H-indolecarbonyl)-1-cyclopropanecarboxylates to prepare functionalized hydropyrido[1,2-a]indole-6(7H)-ones is discussed in Chapter 3. The extension of this tandem protocol towards the total synthesis of (±)-deethyleburnamonine is the subject of Chapter 6. Intramolecular Friedel-Crafts alkylation of N-indolyl alkylidene malonate monoamides was also examined. An In(OTf)3-catalyzed cyclization of substituted methyl 2-(1H-indole-1-carbonyl) acrylates afforded a series of 1H-pyrrolo[1,2-a]indole-3(2H)-ones (Chapter 4), whereas substrates with the indole 2-position blocked provided access to substituted 4H-pyrrolo[3,2,1-ij]quinolin-4-ones (Chapter 5).

A series of new cobalt(II) beta-keto iminato complexes and cobalt(II) salens have been made and the effect of chirality in the northern, southern and peripheral quadrants of these catalysts, with respect to induced enantiomeric excess, during the ring-opening of 1,2-dioxines has been determined. Synthesis of a series of cobalt beta-keto iminato complexes was achieved after modification of literature procedures used for the synthesis of manganese beta-keto iminato complexes and this procedure was applied to generate ligands with ethyl, t-butyl, (-)-bornyl, (+)-menthyl and (-)-menthyl esters and a methyl side chain. Synthesis of the cobalt salens was also achieved using a modified literature procedure, in respect to the more complex aldehydes made. It was ascertained that chirality in the northern quadrant of these catalysts, obtained by the use of optically pure diamines, was of greatest importance in introducing enantiomeric excess into the products of ring-opening of 1,2-dioxines; namely gamma-hydroxy enones, and chirality in the southern and peripheral quadrants was of lesser, although still significant, importance. The reaction conditions were optimised and the conditions under which the highest enantiomeric excess was introduced were determined. The ideal solvent for the ring-opening was found to be THF with a catalyst concentration between 5 and 10 mol% at a temperature of -15oC. These conditions were found to be applicable to all catalysts and 1,2-dioxines tested. Enantiomeric excess as high as 76 % could be introduced when the optimised reaction conditions were used in large scale syntheses of cyclopropane (61). LC-MS studies indicate the presence of a solvent chelated species present in the reaction mixture when the solvent used is THF, however, the use of non-chelating solvents, such as dichloromethane, did not exhibit this same solvent chelated species. Catalyst dimers were also present in the mixture when analysed by LC-MS. The presence of oxygen in the reaction mixture was found to inhibit rearrangement of the dioxine with catalyst oxygen dimers (two molecules of catalyst bound to a single molecule of oxygen) present when analysed by LC-MS, however, the catalyst could be 're-activated' by de-aeration of the solution and was able to introduce the same enantiomeric excess, as prior to the addition of oxygen was unaffected. It was found that not only cobalt(II) tetradentate complexes were useful in the ring-opening of meso 1,2-dioxines. Achiral iron(II) salen and ruthenium(II) salen were also made and shown to be capable of ring-opening the dioxine. A purchased chiral manganese(III) salen was also shown to be capable of ring-opening the 1,2-dioxine, however, the time taken for the rearrangement to occur led to ring closure of the gamma-hydroxy enone and dehydration of the cyclic hemiacetal. The catalysts were also applied to the enantioselective ring-opening of epoxy-1,2-dioxines for the first time with a high level of success with enantiomeric excesses of between 60 and 90 % introduced with most of the catalysts. To show that these catalysts have the potential for use in the synthesis of potentially bioactive cyclopropyl amino acids, amines, acids and alcohols a small number were prepared, including both racemic and optically enriched or optically pure cyclopropanes.
Thesis (Ph.D.)--School of Chemistry and Physics, 2003.

The thesis entitled ‘Studies of NIS Mediated Cyclopropane Ring Opening Reactions in Carbohydrate Chemistry’ is divided into four chapters. Chapter 1: Section 1: Efficient Synthesis of Fused Perhydrofuro[2,3-b]pyrans (and furans) by Ring Opening of 1,2-Cyclopropanated Sugar Derivatives. In this section a general and efficient methodology for the synthesis of carbohydrate derived perhydrofuro[2,3-b]pyrans (and furans) from the corresponding 1,2-cyclopropane carboxylates has been discussed. A wide range of linear-fused perhydrofuro[2,3-b]pyran or furan ring systems are encountered in a number of biologically active natural products. A few approaches are available for the construction of this kind of fused motifs which involve harsh reaction conditions and lengthy reaction sequence. The methodology utilizes the potential ability of cyclopropanated sugars to undergo N-iodosuccinimide (NIS) mediated electrophilic ring opening assisted by the pyran ring oxygen followed by intramolecular trapping of oxonium intermediate to generate the furan ring system. Cyclopropantion of tribenzyl glucal using methyl diazoacetate and catalytic amount of dirhodiumtetracetate furnished corresponding exo-1,2-cyclopropane carboxylate exclusively. To generate a nucleophile, cyclopropane carboxylate ester was reduced to the corresponding alcohol which upon treatment with NIS in CH3CN underwent ring opening followed by intramolecular ring closure to give the corresponding perhydro[2,3-b]furopyran along with an oxidized product. After various modifications we found that using CH2Cl2 as a solvent gave the expected perhydrofuropyran as the sole product in good yield (Scheme I). The stereochemistry of the product was established on the basis of 1H-1H NOESY experiment. There are many natural products that contain the perhydrofuro[2,3-b]furyl glycal core such as clerodin, jodrelline B and caryoptin, which show insect anti-feedant properties. With this in mind, the methodology has been successfully extended to the cyclopropanated tetrahydrofuran derivatives resulting in the synthesis of furofuryl glycal moiety (Scheme II). Scheme II Chapter 1: Section 2: Synthesis of Carbohydrate Derived Fused Perhydrofuro/pyrano[2,3-b]-γ-butyrolactones. In this section a general and efficient methodology for the synthesis of carbohydrate derived perhydrofuro/pyrano[2,3-b]-γ-butyrolactones has been discussed. The fusion of the γ-butyrolactone onto a substituted tetrahydrofuran/pyran ring makes a distinctive class natural diterpenoids. Representative members of this family include the marine diterpenoids norrisilide and miniolutelide A. In this chapter we describe a neutral and general method for the construction of perhydrofuro/pyrano[2,3-b]-γ-butyrolactones by NIS mediated ring opening of carbohydrate derived 1,2-cyclopropane carboxylic acids (Scheme III). Scheme III The present strategy is complementary to the existing methods and it is useful since it incorporates an additional chiral center in the molecule under milder conditions, which can be used for further transformations. Chapter 2: Ring Opening of Activated Cyclopropanes with NIS/NaN3: One-pot Synthesis of C-1 Linked Pseudo Disaccharides. Ring opening reactions of activated cyclopropanes have been widely used in organic synthesis. But they are restricted to only selected nucleophiles such as alcohol/ water, as most of the ring opening reactions need acidic activation. This chapter deals with studies of reactivity of various activated cyclopropanes with NIS as a neutral activator and sodium azide as a source of nitrogen nucleophile (Scheme IV). Scheme IV We have clearly demonstrated not only the importance of the donor-acceptor feature in the cyclopropanes in the electrophilic ring opening reaction, but also the selectivity in its functionality. Scheme V This methodology has been successfully utilized in a one-pot synthesis of C-1 linked pseudo-disaccharides from carbohydrate derived 1,2-cyclopropane carboxylates (Scheme V). Chapter 3: Synthesis of Unnatural C-2 Amino Acid Nucleosides Using NIS Mediated Ring Opening of 1,2-Cyclopropane Carboxylated Sugar Derivatives. In this chapter, we have efficiently demonstrated the utility of NIS mediated regioselective ring opening of carbohydrate derived donor-acceptor cyclopropanes for the synthesis of C-2 amino acid nucleosides. This leads to a new class of analogs of peptidyl nucleosides (Scheme VI). Scheme VI One of the advantageous factors is the attachment of nucleobase as well as generation of amino acid precursor in the same reaction which avoids lengthy reaction sequence. We have also shown the synthetic utility of our methodology to pyrimidine based furanosyl C-2 amino acid nucleosides which are of interest, since polyoxins having similar structural core exhibit antifungal activity (Scheme VII). Chapter 4: Attempts Towards the Synthesis of Carbohydrate Derived Spiro-perhydrofuropyrans Using NIS Mediated Cyclopropane Ring Opening Reaction. In this chapter we present various attempts to synthesize spiro-perhydrofuropyran/furans by ring opening of spiro-cylopropane derivatives and attempts towards stereoselective synthesis of spiro-cyclopropane carboxylates. Spiroacetal can be synthesized from the corresponding exo-cyclopropyl methanol, which can be obtained from the corresponding exo- cyclopropane carboxylate. The cyclopropyl carboxylate can be obtained from an exo- vinyl ether. Cyclopropanation of carbohydrate derived exo-glycal failed to give any selectivity under a variety of reaction conditions (Scheme VIII). Carbohydrate derived C1-unsaturated ester on cyclopropanation reaction using standard conditions (Pd(OAc)2/CH2N2) was found to be inert. The reaction under Simmons-Smith cyclopropanation conditions also gave similar results. Reduction of the ester part of the molecule to the corresponding alcohol was found to be helpful in the Simmon-Smith cyclopropanation reaction (CH2I2, Et2Zn) to obtain the corresponding exo-cyclopropane, but disappointingly without any selectivity (Scheme IX). In order to get exo-cyclopropane carboxylate with high stereoselectivity, we decided to use one of the hydroxyl group present in the molecule, as a chiral auxiliary. All the established methods for the diazoester formation failed to attach diazo ester at C-4 position (Scheme X). Scheme X (For structural formula pl see the pdf file)

The thesis entitled ‘Studies of NIS Mediated Cyclopropane Ring Opening Reactions in Carbohydrate Chemistry’ is divided into four chapters. Chapter 1: Section 1: Efficient Synthesis of Fused Perhydrofuro[2,3-b]pyrans (and furans) by Ring Opening of 1,2-Cyclopropanated Sugar Derivatives. In this section a general and efficient methodology for the synthesis of carbohydrate derived perhydrofuro[2,3-b]pyrans (and furans) from the corresponding 1,2-cyclopropane carboxylates has been discussed. A wide range of linear-fused perhydrofuro[2,3-b]pyran or furan ring systems are encountered in a number of biologically active natural products. A few approaches are available for the construction of this kind of fused motifs which involve harsh reaction conditions and lengthy reaction sequence. The methodology utilizes the potential ability of cyclopropanated sugars to undergo N-iodosuccinimide (NIS) mediated electrophilic ring opening assisted by the pyran ring oxygen followed by intramolecular trapping of oxonium intermediate to generate the furan ring system. Cyclopropantion of tribenzyl glucal using methyl diazoacetate and catalytic amount of dirhodiumtetracetate furnished corresponding exo-1,2-cyclopropane carboxylate exclusively. To generate a nucleophile, cyclopropane carboxylate ester was reduced to the corresponding alcohol which upon treatment with NIS in CH3CN underwent ring opening followed by intramolecular ring closure to give the corresponding perhydro[2,3-b]furopyran along with an oxidized product. After various modifications we found that using CH2Cl2 as a solvent gave the expected perhydrofuropyran as the sole product in good yield (Scheme I). The stereochemistry of the product was established on the basis of 1H-1H NOESY experiment. There are many natural products that contain the perhydrofuro[2,3-b]furyl glycal core such as clerodin, jodrelline B and caryoptin, which show insect anti-feedant properties. With this in mind, the methodology has been successfully extended to the cyclopropanated tetrahydrofuran derivatives resulting in the synthesis of furofuryl glycal moiety (Scheme II). Scheme II Chapter 1: Section 2: Synthesis of Carbohydrate Derived Fused Perhydrofuro/pyrano[2,3-b]-γ-butyrolactones. In this section a general and efficient methodology for the synthesis of carbohydrate derived perhydrofuro/pyrano[2,3-b]-γ-butyrolactones has been discussed. The fusion of the γ-butyrolactone onto a substituted tetrahydrofuran/pyran ring makes a distinctive class natural diterpenoids. Representative members of this family include the marine diterpenoids norrisilide and miniolutelide A. In this chapter we describe a neutral and general method for the construction of perhydrofuro/pyrano[2,3-b]-γ-butyrolactones by NIS mediated ring opening of carbohydrate derived 1,2-cyclopropane carboxylic acids (Scheme III). Scheme III The present strategy is complementary to the existing methods and it is useful since it incorporates an additional chiral center in the molecule under milder conditions, which can be used for further transformations. Chapter 2: Ring Opening of Activated Cyclopropanes with NIS/NaN3: One-pot Synthesis of C-1 Linked Pseudo Disaccharides. Ring opening reactions of activated cyclopropanes have been widely used in organic synthesis. But they are restricted to only selected nucleophiles such as alcohol/ water, as most of the ring opening reactions need acidic activation. This chapter deals with studies of reactivity of various activated cyclopropanes with NIS as a neutral activator and sodium azide as a source of nitrogen nucleophile (Scheme IV). Scheme IV We have clearly demonstrated not only the importance of the donor-acceptor feature in the cyclopropanes in the electrophilic ring opening reaction, but also the selectivity in its functionality. Scheme V This methodology has been successfully utilized in a one-pot synthesis of C-1 linked pseudo-disaccharides from carbohydrate derived 1,2-cyclopropane carboxylates (Scheme V). Chapter 3: Synthesis of Unnatural C-2 Amino Acid Nucleosides Using NIS Mediated Ring Opening of 1,2-Cyclopropane Carboxylated Sugar Derivatives. In this chapter, we have efficiently demonstrated the utility of NIS mediated regioselective ring opening of carbohydrate derived donor-acceptor cyclopropanes for the synthesis of C-2 amino acid nucleosides. This leads to a new class of analogs of peptidyl nucleosides (Scheme VI). Scheme VI One of the advantageous factors is the attachment of nucleobase as well as generation of amino acid precursor in the same reaction which avoids lengthy reaction sequence. We have also shown the synthetic utility of our methodology to pyrimidine based furanosyl C-2 amino acid nucleosides which are of interest, since polyoxins having similar structural core exhibit antifungal activity (Scheme VII). Chapter 4: Attempts Towards the Synthesis of Carbohydrate Derived Spiro-perhydrofuropyrans Using NIS Mediated Cyclopropane Ring Opening Reaction. In this chapter we present various attempts to synthesize spiro-perhydrofuropyran/furans by ring opening of spiro-cylopropane derivatives and attempts towards stereoselective synthesis of spiro-cyclopropane carboxylates. Spiroacetal can be synthesized from the corresponding exo-cyclopropyl methanol, which can be obtained from the corresponding exo- cyclopropane carboxylate. The cyclopropyl carboxylate can be obtained from an exo- vinyl ether. Cyclopropanation of carbohydrate derived exo-glycal failed to give any selectivity under a variety of reaction conditions (Scheme VIII). Carbohydrate derived C1-unsaturated ester on cyclopropanation reaction using standard conditions (Pd(OAc)2/CH2N2) was found to be inert. The reaction under Simmons-Smith cyclopropanation conditions also gave similar results. Reduction of the ester part of the molecule to the corresponding alcohol was found to be helpful in the Simmon-Smith cyclopropanation reaction (CH2I2, Et2Zn) to obtain the corresponding exo-cyclopropane, but disappointingly without any selectivity (Scheme IX). In order to get exo-cyclopropane carboxylate with high stereoselectivity, we decided to use one of the hydroxyl group present in the molecule, as a chiral auxiliary. All the established methods for the diazoester formation failed to attach diazo ester at C-4 position (Scheme X). Scheme X (For structural formula pl see the pdf file)

gem-Dihalocyclopropanes (1) are an important class of compound that play significant roles in contemporary organic synthesis. This is largely due to their ease of preparation, (which is normally accomplished via addition of the relevant dihalocarbene to an alkene), and the wide range of reactions they can undergo. These reactions can be divided into two broad subgroups, those that proceed with retention of the three membered ring, and those where one of the C-C bonds is broken, thus leading to ring cleavage. The vast majority of gem-dihalocyclopropanes described in the literature are the dibromo- or dichloro- systems, as these are the most synthetically accessible (1, where X = Br or Cl). Chapter One of this thesis provides an introduction to the preparation and synthetic utility of gem-dihalocyclopropanes, while the work described in the remainder of this thesis utilises such systems in work directed toward the synthesis of a number of alkaloidal ring-systems. Chapter Two of this thesis outlines work undertaken in the pursuit of a synthesis of pcrhydrohistrionicotoxin (50), a derivative of the alkaloid histrionicotoxin. A silver(l)-promoted cyclopropane ring-opening/spirocyclisation reaction was to be used as the key step in this work. Thus, starting from cyclopentanone, a pair of diastereoisomeric substrates, 124 and 125, has been prepared that contain all the functionality thought necessary for generating a substrate capable of engaging in the key reaction. Chapter Three outlines work undertaken in the pursuit of a synthesis of the core cis-3a-arylhydroindole structure of a number of Amaryllidaceae alkaloids. Starting with gem-dibromoeyclopropane 146, iodide 163 was prepared over' 7 steps, and upon subjection of the latter compound to reductive radical cyclisation conditions resulted in the production of the cis-3a-arylhydroindole 164. Chapter Four outlines the preparation of a senes of N-protected and propargylated l-amino-2-aryl-2-cyclohexenes (213), from gem-dibromocyclopropanes such as 212. Several of these have been showu to undergo an intramolecular Alder-ene (IMAE) reaction in the presence of palladium acetate and the ligand BBEDA to afford C3aarylhexahydroindoles of the general form 214. Certain of these products may serve as precursors to the alkaloid tazettine (133). Chapter Five contains the experimental procedures and data to support all work outlined in this thesis.

Cyclopropanes are strained molecules and undergo reactions, for example, through ring opening and rearrangements. Preparative methods and reactivities of cyclopropanes are known widely in organic synthesis. The high reactivities inherent in cyclopropanes allow them to be valuable building blocks in organic synthesis. The combination of cyclopropanes and carbohydrates has been explored in recent years. Carbohydrates, the naturally-occurring members of chiral pool, are attractive platforms for asymmetric synthesis. Cyclopropanation of, for example, unsaturated sugars affords [4.1.0] bicyclic systems, thereby combining the high reactivities of cyclopropanes together with optical purities of sugars. Chapter 1 of the Thesis describes (i) various types of cyclopropane ring opening reactions in general and (ii) known reactions of cyclopropanes in carbohydrates relevant to the work presented in the Thesis. Seven-membered cyclic sugars, namely, septanoses and septanosides, are less commonly known sugar homologues. Synthesis of septanoses arise interest, due to their configurational and conformational features and the attendant possibilities to explore their chemical, physical and biological properties. In a programme, it was desired to identify a new methodology for synthesis of septanosides. It was envisaged that 2-hydroxy glycals, namely, oxyglycals, would form as suitable substrates for ring expansion, leading to the formation of septanoside derivatives that are retained with hydroxyl groups in each carbon of the septanoside. In the event, a new methodology was identified. A carbene insertion of an oxyglycal substrate, nucleophilic ring opening of the cyclopropyl moiety, oxidation and reduction reactions were identified to expand the six membered pyranoses to seven membered septanosides (Scheme 1). The methodology was established through preparation of two configurationally different septanosides, namely, the methyl α-D-glycero-D-talo-septanoside and methyl α-D-glycero-L-altro-septanoside from D-glucose and D-galactose, respectively. Chapter 2 presents details of the methodology and the preparation of septanosides from precursors oxyglucal and oxygalactal. Scheme 1 Continuing the efforts to extend the methodology, preparation of a variety of septanosides, using phenoxides, sugars and azide were undertaken. It was found that ring opening with sugars were highly stereoselective, leading to an exclusive formation of the -anomer of sugar oxepines, whereas, the phenoxides and azide led to a mixture of anomers of the corresponding oxepines, in a ~1:1 ratio (Scheme 2). Scheme 2 An important observation was -anomer of the oxepine derived intermediates, having diketo-functionalities, underwent NaBH4 mediated conversion to diols with higher diastereoselectivities at the newly generated stereo-centers, whereas the -anomers lacked to retain the diastereoselectivities, in the case of aryl septanosides. This part of work consolidated further the generality of the oxyglycal ring-expansion method to prepare septanosides, possessing different substituents at their reducing ends. Chapter 3 describes the details of syntheses and characterization of various aryl septanosides, septanoside disaccharides and azido-septanoside derivatives. It was planned further to synthesize septanoside containing di-and trisaccharides from naturally-occurring disaccharides, through the oxyglycal route. Oxyglycals, derived from lactose and maltose, were expanded to septanoside-containing trisaccharides through a ring expansion method. Thus septanosides incorporated disaccharides and trisaccharides, with 6-7, 6-7-5 and 6-7-6 ring sizes, were prepared through the ring expansion method. The reaction not only led to a ring expansion, but also, to a concomitant glycoside formation, in a stereoselective manner (Scheme 3). Scheme 3 A conformational analysis of the galacto-septano-glucopyrano-configured 6-7-6 trisaccharide was undertaken with aid of NMR spectroscopy and computational methods. Spatial distances from NMR experiments were utilized while performing molecular dynamics with AMBER* force field and further optimizations using B3LYP/6-31+G* level. The study showed that septanoside ring in the trisaccharide adopted twist-chair conformation O,1TC5,6, as shown in Figure 1. Chapter 4 describes synthesis of septanoside containing di-and trisaccharides and conformational analysis of a 6-7-6 trisaccharide, through solution phase and computational methods. An effort was pursued to prepare septanoside-based amphiphiles with varying alkyl chain lengths, using our newly established methodology and to study their amphiphilicities. A series of septanoside amphiphiles, having C10 to C18 alkyl groups, were prepared as their -anomers as shown in Figure 2. The amphiphilic behavior of the alkyl septanosides was assessed through studies of their liquid crystalline (LC) properties. The LC properties were evaluated using polarizing optical microscopy, differential scanning calorimetry and powder X-ray diffraction methods. All the septanoside amphiphiles exhibited a smectic A phase in general. DSC thermograms showed crystal-crystal and crystal-mesophase phase transitions. Powder X-ray diffraction studies allowed to identify the lamellar structuring of the smectic A phase. Further, two distinct two layer spacings were observed. Such an observation is un-usual in carbohydrate liquid crystals. Chapter 5 details of synthesis and studies of the mesomorphic behavior of septanoside amphiphiles. In summary, the Thesis establishes a new route to synthesize septanoside derivatives, from oxyglycal sugar derivatives. Ring expansion of a pyranoside to a septanoside was achieved through key reactions of a cyclopropanation, ring opening, oxidation and reduction. Methyl α-D-glycero-septanoside derivatives were synthesized, from the corresponding oxyglycals. Cyclopropane ring opening ability of various nucleophiles were studied, it was found that ring-opening reactions with phenols, sugars, and azides are effective, which facilitated the synthesis of various aryl, glycosyl and azido-substituted septanosides. Synthesis of septanosides incorporated with di-and trisaccharides were accomplished. The detailed conformational analysis studies showed that the septanoside adopted twist-chair conformation in a trisaccharide molecule. Preparation and studies of septanoside based amphiphiles and their mesophase behavior were also accomplished. Overall, the studies presented in the Thesis provide a new insight to ring expanded sugars. The salient features of the present method are that the intermediates such as the seven membered vinyl halides, vinyl ethers, the diketones and the diols are potential sites for many other functionalizations. These features can be explored further in functionalizing the newly formed septanosides. (For structural formula pl see the pdf file)

Cyclopropanes are strained molecules and undergo reactions, for example, through ring opening and rearrangements. Preparative methods and reactivities of cyclopropanes are known widely in organic synthesis. The high reactivities inherent in cyclopropanes allow them to be valuable building blocks in organic synthesis. The combination of cyclopropanes and carbohydrates has been explored in recent years. Carbohydrates, the naturally-occurring members of chiral pool, are attractive platforms for asymmetric synthesis. Cyclopropanation of, for example, unsaturated sugars affords [4.1.0] bicyclic systems, thereby combining the high reactivities of cyclopropanes together with optical purities of sugars. Chapter 1 of the Thesis describes (i) various types of cyclopropane ring opening reactions in general and (ii) known reactions of cyclopropanes in carbohydrates relevant to the work presented in the Thesis. Seven-membered cyclic sugars, namely, septanoses and septanosides, are less commonly known sugar homologues. Synthesis of septanoses arise interest, due to their configurational and conformational features and the attendant possibilities to explore their chemical, physical and biological properties. In a programme, it was desired to identify a new methodology for synthesis of septanosides. It was envisaged that 2-hydroxy glycals, namely, oxyglycals, would form as suitable substrates for ring expansion, leading to the formation of septanoside derivatives that are retained with hydroxyl groups in each carbon of the septanoside. In the event, a new methodology was identified. A carbene insertion of an oxyglycal substrate, nucleophilic ring opening of the cyclopropyl moiety, oxidation and reduction reactions were identified to expand the six membered pyranoses to seven membered septanosides (Scheme 1). The methodology was established through preparation of two configurationally different septanosides, namely, the methyl α-D-glycero-D-talo-septanoside and methyl α-D-glycero-L-altro-septanoside from D-glucose and D-galactose, respectively. Chapter 2 presents details of the methodology and the preparation of septanosides from precursors oxyglucal and oxygalactal. Scheme 1 Continuing the efforts to extend the methodology, preparation of a variety of septanosides, using phenoxides, sugars and azide were undertaken. It was found that ring opening with sugars were highly stereoselective, leading to an exclusive formation of the -anomer of sugar oxepines, whereas, the phenoxides and azide led to a mixture of anomers of the corresponding oxepines, in a ~1:1 ratio (Scheme 2). Scheme 2 An important observation was -anomer of the oxepine derived intermediates, having diketo-functionalities, underwent NaBH4 mediated conversion to diols with higher diastereoselectivities at the newly generated stereo-centers, whereas the -anomers lacked to retain the diastereoselectivities, in the case of aryl septanosides. This part of work consolidated further the generality of the oxyglycal ring-expansion method to prepare septanosides, possessing different substituents at their reducing ends. Chapter 3 describes the details of syntheses and characterization of various aryl septanosides, septanoside disaccharides and azido-septanoside derivatives. It was planned further to synthesize septanoside containing di-and trisaccharides from naturally-occurring disaccharides, through the oxyglycal route. Oxyglycals, derived from lactose and maltose, were expanded to septanoside-containing trisaccharides through a ring expansion method. Thus septanosides incorporated disaccharides and trisaccharides, with 6-7, 6-7-5 and 6-7-6 ring sizes, were prepared through the ring expansion method. The reaction not only led to a ring expansion, but also, to a concomitant glycoside formation, in a stereoselective manner (Scheme 3). Scheme 3 A conformational analysis of the galacto-septano-glucopyrano-configured 6-7-6 trisaccharide was undertaken with aid of NMR spectroscopy and computational methods. Spatial distances from NMR experiments were utilized while performing molecular dynamics with AMBER* force field and further optimizations using B3LYP/6-31+G* level. The study showed that septanoside ring in the trisaccharide adopted twist-chair conformation O,1TC5,6, as shown in Figure 1. Chapter 4 describes synthesis of septanoside containing di-and trisaccharides and conformational analysis of a 6-7-6 trisaccharide, through solution phase and computational methods. An effort was pursued to prepare septanoside-based amphiphiles with varying alkyl chain lengths, using our newly established methodology and to study their amphiphilicities. A series of septanoside amphiphiles, having C10 to C18 alkyl groups, were prepared as their -anomers as shown in Figure 2. The amphiphilic behavior of the alkyl septanosides was assessed through studies of their liquid crystalline (LC) properties. The LC properties were evaluated using polarizing optical microscopy, differential scanning calorimetry and powder X-ray diffraction methods. All the septanoside amphiphiles exhibited a smectic A phase in general. DSC thermograms showed crystal-crystal and crystal-mesophase phase transitions. Powder X-ray diffraction studies allowed to identify the lamellar structuring of the smectic A phase. Further, two distinct two layer spacings were observed. Such an observation is un-usual in carbohydrate liquid crystals. Chapter 5 details of synthesis and studies of the mesomorphic behavior of septanoside amphiphiles. In summary, the Thesis establishes a new route to synthesize septanoside derivatives, from oxyglycal sugar derivatives. Ring expansion of a pyranoside to a septanoside was achieved through key reactions of a cyclopropanation, ring opening, oxidation and reduction. Methyl α-D-glycero-septanoside derivatives were synthesized, from the corresponding oxyglycals. Cyclopropane ring opening ability of various nucleophiles were studied, it was found that ring-opening reactions with phenols, sugars, and azides are effective, which facilitated the synthesis of various aryl, glycosyl and azido-substituted septanosides. Synthesis of septanosides incorporated with di-and trisaccharides were accomplished. The detailed conformational analysis studies showed that the septanoside adopted twist-chair conformation in a trisaccharide molecule. Preparation and studies of septanoside based amphiphiles and their mesophase behavior were also accomplished. Overall, the studies presented in the Thesis provide a new insight to ring expanded sugars. The salient features of the present method are that the intermediates such as the seven membered vinyl halides, vinyl ethers, the diketones and the diols are potential sites for many other functionalizations. These features can be explored further in functionalizing the newly formed septanosides. (For structural formula pl see the pdf file)

NOTE: Text or symbols not renderable in plain ASCII are indicated by [...]. Abstract is included in .pdf document. The first chapter details the preparation and structural characterization of a rhenium (VII) oxo-vinylalkylidene complex and discusses its activity in olefin metathesis reactions. A substitution reaction affords the rhenium (V) oxo-trisalkoxide precursor, a species that surprisingly adopts a facial arrangement of three very bulky alkoxide ligands in its crystal structure. This complex reacts with 3,3-diphenylcyclopropene in a non-coordinating solvent to yield a mixture of two rhenium alkylidene isomers. Over time one species predominates and is isolated. An X-ray diffraction study of the isolated complex and [...] NMR studies of the isomerization process are described. Reactivity studies indicate that the isolated product demonstrates very limited olefin metathesis activity. However, the addition of Lewis acid cocatalysts to the rhenium alkylidene complex generates a much more active catalyst system, in particular, for the metathesis of cis-2-pentene. No propagating alkylidene species are observed during the metathesis reaction. The second chapter describes the synthesis and characterization of a dicyclopropene compound from which the preparation of ROMP diinitiators is reasoned to be possible. The starting material-1,4-di(1-phenylvinyl)benzene-is readily prepared via a Grignard reaction and subsequent dehydration. A series of three steps analogous to those of the 3,3 diphenylcyclopropene synthesis yield the desired roduct-1,4-di(1-phenylcycloprop-2-enyl)benzene. Alternate pathways to the product also are proposed and the investigations are detailed. In particular, a biphasic cyclopropanation reaction using either bromoform or chloroform as a carbene source affords the respective dicyclopropane intermediates. Ultimately the syntheses of bis(metal alkylidene) complexes from reactions of this dicyclo-propene with various transition metal precursors have implications for the formation of polymers which propagate in two directions and for the preparation of triblock copolymers.

In the research reported in this thesis, two methods for synthesizing alkylidene complexes were investigated: (1) ring-opening of cyclopropenes to give vinyl alkylidene complexes and (2) alkylidene transfer from phosphorus ylides to metal centers. Tungsten(IV) imido precursors of the form WX_2(NAr)L_n (X = Cl or OR; Ar = Ph, 2,6-C_6H_3-Me_2, 2,6-C_6H_3-(i-PR)_2, L_n = PR3, P(OR)_3 or ether donor ligands) were used throughout the investigation.

A brief overview of the syntheses and uses of high-valent alkylidene complexes is given in Chapter 1. The reactions of WCl_2(NAr)(PX_3)_3 (X = R or OR) precursors with 3,3-diphenylcyclopropene and 4,8-dioxaspiro[2.5]oct-1-ene are reported in Chapter 2. η^2-Cyclopropene complexes [W(η2-cyclopropene)Cl_2(NAr)(PX_3)_2] were synthesized from precursors containing the smaller imido ligands; increasing the steric bulk of the imido ligand favored the ring-opening of the cyclopropenes to yield the vinyl alkylidene compounds [W(=CH-CH=CR'_2)Cl_2(NAr)(PX_3)_2]. Conversion of thermally stable η^2-cyclopropene complexes to give the corresponding vinyl alkylidene compounds was observed upon photolysis or addition of catalytic amounts of H_gCl_2.

The transfer of alkylidenes from Ph_3P=CHAr' and Ph_3P=CH-CH=CMe_2 to WCI_2(NPh)(PMePh_2)_3 to give W(=CHR')CI_2(NPh)(PMePh_2)_2 is reported in the first half of Chapter 3, and the effects of varying the solvent, the ylides, and the tungsten precursors are discussed. The remainder of Chapter 3 deals with the in situ reduction and trapping of WCl_2(NAr)[OCMe(CF3_ 3) _ 2] _ 2(THF) precursors by Ph_3P=CHAr' to give W(=CHAr')(NAr)[OCMe(CF_3)_2]_2(PPh_3). The use of the chelating o-methoxybenzylidene was especially effective here, as coordination by the o-methoxy group greatly aided the transfer reaction and, in addition, stabilized the resulting product.

Chapter 4 documents initial studies involving the reactions of WCI_2(NAr)(PX_3) _3 precursors with exo-5,6-dimethoxymethyl-7-oxanorbornene. For reactions involving tungsten precursors with the smaller imido ligands, fonnation of η2-olefin complexes W[η_2-(7-oxanorbomene]Cl2(NAr)(PX3h was observed. Oxygen abstraction to give 5,6- dimethoxymethylcyclohexadiene occurred upon reaction of this olefin with WCl_2[N-2,6-C_6H_3-(i-Pr) _2] [P(OMe) _3] _3.

A series of new cobalt(II) beta-keto iminato complexes and cobalt(II) salens have been made and the effect of chirality in the northern, southern and peripheral quadrants of these catalysts, with respect to induced enantiomeric excess, during the ring-opening of 1,2-dioxines has been determined. Synthesis of a series of cobalt beta-keto iminato complexes was achieved after modification of literature procedures used for the synthesis of manganese beta-keto iminato complexes and this procedure was applied to generate ligands with ethyl, t-butyl, (-)-bornyl, (+)-menthyl and (-)-menthyl esters and a methyl side chain. Synthesis of the cobalt salens was also achieved using a modified literature procedure, in respect to the more complex aldehydes made. It was ascertained that chirality in the northern quadrant of these catalysts, obtained by the use of optically pure diamines, was of greatest importance in introducing enantiomeric excess into the products of ring-opening of 1,2-dioxines; namely gamma-hydroxy enones, and chirality in the southern and peripheral quadrants was of lesser, although still significant, importance. The reaction conditions were optimised and the conditions under which the highest enantiomeric excess was introduced were determined. The ideal solvent for the ring-opening was found to be THF with a catalyst concentration between 5 and 10 mol% at a temperature of -15oC. These conditions were found to be applicable to all catalysts and 1,2-dioxines tested. Enantiomeric excess as high as 76 % could be introduced when the optimised reaction conditions were used in large scale syntheses of cyclopropane (61). LC-MS studies indicate the presence of a solvent chelated species present in the reaction mixture when the solvent used is THF, however, the use of non-chelating solvents, such as dichloromethane, did not exhibit this same solvent chelated species. Catalyst dimers were also present in the mixture when analysed by LC-MS. The presence of oxygen in the reaction mixture was found to inhibit rearrangement of the dioxine with catalyst oxygen dimers (two molecules of catalyst bound to a single molecule of oxygen) present when analysed by LC-MS, however, the catalyst could be 're-activated' by de-aeration of the solution and was able to introduce the same enantiomeric excess, as prior to the addition of oxygen was unaffected. It was found that not only cobalt(II) tetradentate complexes were useful in the ring-opening of meso 1,2-dioxines. Achiral iron(II) salen and ruthenium(II) salen were also made and shown to be capable of ring-opening the dioxine. A purchased chiral manganese(III) salen was also shown to be capable of ring-opening the 1,2-dioxine, however, the time taken for the rearrangement to occur led to ring closure of the gamma-hydroxy enone and dehydration of the cyclic hemiacetal. The catalysts were also applied to the enantioselective ring-opening of epoxy-1,2-dioxines for the first time with a high level of success with enantiomeric excesses of between 60 and 90 % introduced with most of the catalysts. To show that these catalysts have the potential for use in the synthesis of potentially bioactive cyclopropyl amino acids, amines, acids and alcohols a small number were prepared, including both racemic and optically enriched or optically pure cyclopropanes.
Thesis (Ph.D.)--School of Chemistry and Physics, 2003.