Relevant bibliographies by topics / Cups

Academic literature on the topic 'Cups'

Author: Grafiati
Published: 4 June 2021
Last updated: 11 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Cups.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Cups"

1

Blair, Claude. "Loving Cups and Grace Cups." Antiquaries Journal 84 (September 2004): 393–99. http://dx.doi.org/10.1017/s0003581500045935.

Full text
Abstract:
The paper discusses the ceremony of the Loving Cup that follows the dinners of many City of London livery companies. It concludes that, far from being of Saxon origin, as has been widely believed, it was a Romantic revival of the late eighteenth century derived, almost certainly, from the medieval use of grace cups.
APA, Harvard, Vancouver, ISO, and other styles
2

Brownlee, Ann Blair, and H. A. G. Brijder. "Siana Cups I and Komast Cups." American Journal of Archaeology 90, no. 1 (January 1986): 106. http://dx.doi.org/10.2307/505997.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Tokuomi, Saeko, and Kazuya Mori. "Suction Cup for Concrete Wall Testing Robot." Journal of Robotics and Mechatronics 28, no. 2 (April 19, 2016): 194–97. http://dx.doi.org/10.20965/jrm.2016.p0194.

Full text
Abstract:
[abstFig src='/00280002/10.jpg' width=""300"" text='Claws attached to suction cups' ]Efficient economical test methods are widely needed worldwide. One target of this is to develop climbing robots that check for defects in concrete. These concrete-wall-climbing robots generally use suction cups to support themselves and test apparatus, but the danger exists of this expensive equipment falling. This may occur due to one of two reasons. The first is inadequate ring-seal decompression in suction cups and the second is suction cup slippage. We have added claws to suction cups to help prevent slippage. The claws we developed are attached to the suction cups to help grip the wall. In the sections below, we discuss the scratch tests we performed to test claw effectiveness in improving suction cup grip. We then prove through tests under actual conditions that the estimated grip force matched that of an actual suction cup's grip force with the claw.
APA, Harvard, Vancouver, ISO, and other styles
4

Bernstein, Hanne Dina. "Two Cups." AJN, American Journal of Nursing 104, no. 4 (April 2004): 39. http://dx.doi.org/10.1097/00000446-200404000-00015.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Cameron, Hugh U. "MODIFIED CUPS." Orthopedic Clinics of North America 29, no. 2 (April 1998): 277–95. http://dx.doi.org/10.1016/s0030-5898(05)70326-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Mwingira, Victor S., Jeroen Spitzen, Leonard E. G. Mboera, José L. Torres-Estrada, and Willem Takken. "The Influence of Larval Stage and Density on Oviposition Site-Selection Behavior of the Afrotropical Malaria Mosquito Anopheles coluzzii (Diptera: Culicidae)." Journal of Medical Entomology 57, no. 3 (October 20, 2019): 657–66. http://dx.doi.org/10.1093/jme/tjz172.

Full text
Abstract:
Abstract In the selection of oviposition sites female mosquitoes use various cues to assess site quality to optimize survival of progeny. The presence of conspecific larvae influences this process. Interactive effects of oviposition site selection were studied in the malaria mosquito Anopheles coluzzii Coetzee & Wilkerson in dual- and no-choice assays, by exposing single gravid mosquitoes to oviposition cups containing 1) larvae of different developmental stages, 2) larvae-conditioned water (LCW), and 3) cups where visual cues of conspecific larvae were absent. Early-stage conspecific larvae had a positive effect on the oviposition response. By contrast, late stages of conspecific larvae had a negative effect. Oviposition choice was dependent on larval density. Moreover, in oviposition cups where larvae were hidden from view, late-stage larvae had a significant negative effect on oviposition suggesting the involvement of olfactory cues. LCW had no effect on oviposition response, indicating involvement of chemicals produced by larvae in vivo. It is concluded that the presence of larvae in a breeding site affects the oviposition response depending on the development stage of the larvae. These responses appear to be mediated by olfactory cues emitted by the larval habitat containing live larvae, resulting in the enhanced reproductive fitness of the females.
APA, Harvard, Vancouver, ISO, and other styles
7

Appova, Aina K. "Star Cups Forever." Mathematics Teaching in the Middle School 22, no. 4 (November 2016): 256. http://dx.doi.org/10.5951/mathteacmiddscho.22.4.0256.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Banchoff, Thomas. "Complementary Coffee Cups." College Mathematics Journal 37, no. 3 (May 1, 2006): 170. http://dx.doi.org/10.2307/27646326.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Clyburn, Terry A., Amanda Weitz-Marshall, and Catherine G. Ambrose. "Constrained acetabular cups." Journal of Arthroplasty 18, no. 4 (June 2003): 466–70. http://dx.doi.org/10.1016/s0883-5403(03)00064-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Banchoff, Thomas. "Complementary Coffee Cups." College Mathematics Journal 37, no. 3 (May 2006): 170–75. http://dx.doi.org/10.1080/07468342.2006.11922182.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Cups"

1

Ehrig, Matthias. "Drucken mit CUPS." Universitätsbibliothek Chemnitz, 2001. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-200100326.

Full text
Abstract:
Gemeinsamer Workshop von Universitaetsrechenzentrum und Professur "Rechnernetze und verteilte Systeme" der Fakultaet fuer Informatik der TU Chemnitz. Workshop-Thema: Mobilitaet Der Vortrag stellt das Common UNIX Printing System vor, das auf dem neuen Internet Printing Protokol Standard IPP beruht und diskutiert Einsatzmöglichkeiten im URZ der TU Chemnitz
APA, Harvard, Vancouver, ISO, and other styles
2

Jahre, Daniel. "CUPS - KOnfiguration und Programmierung." Universitätsbibliothek Chemnitz, 2001. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-200100421.

Full text
Abstract:
In diesem Vortrag werden die Konfigurationswerkzeuge des Common Unix Printing Systems (CUPS) beispielhaft erläutert. Außerdem wird die Konfiguration von CUPS anhand der Konfigurationsdateien beschrieben. Die Progranmmierung von CUPS wird anhand der Programmiersprache C gezeigt.
APA, Harvard, Vancouver, ISO, and other styles
3

Kiefer, John. "Sacred containers/sacred cups." Virtual Press, 1999. http://liblink.bsu.edu/uhtbin/catkey/1129631.

Full text
Abstract:
Since the 1960s, following the dramatic changes in the Roman Catholic Church, the design of the chalices used at the communion service became simplified; many of them becoming so plain that they are only wine goblets devoid of any decoration. As Catholics implement the changes of the Second Vatican Council, we have a growing desire for sacred vessels that better reflect a sense of awe.The purpose of this creative project is to explore symbolism used in chalice design. Traditional and newer symbols are incorporated into the chalices produced in this project.My creative process involves a community of people. Teachers, fellow students, friends and members of my church shared their knowledge, ideas and insights to enrich the final products.The sense of the sacred is not limited to God because God is present within each person. To be aware of the sacred in my own designs I need to be in touch with the sacred within me.
Department of Art
APA, Harvard, Vancouver, ISO, and other styles
4

Yang, Shannon X. (Shannon Xuan). "Positive pressure induced channeled suction cups." Thesis, Massachusetts Institute of Technology, 2013. http://hdl.handle.net/1721.1/83829.

Full text
Abstract:
Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2013.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 39-40).
Leaking in water pipe is a critical issue in Middle Eastern countries such as Kuwait where water is scarce. In-pipe robots can be dispatched to discover the network and inspect the inner surface of the pipe. This thesis describes the design and characterization of suction pads for in-pipe robots. The suction cups are made of hyperelastic materials that contain air channels inside. Instead of using conventional suction technique that is prone to leaking and loosing adhesion force, the suction cup is actuated by compressed air or liquid, which deforms the geometry of the cup to achieve suction. In order to verify the geometry changes during actuation, a uniaxial tension test was done on the elastic material used to acquire the material properties and the suction cup designs were then simulated using FEA in ABAQUS. Next, prototypes were designed in SolidWorks and fabricated using soft lithography techniques. To measure the suction force, pressure measurements were taken both inside the prototype channels and underneath the suction cup. Results show that a Positive Pressure Actuated Suction-cup (PPAS) of diameter forty millimeters can achieve suction force up to 68 N. As more air is inserted into PPAS, the suction force also increases. The concept has proved to be a feasible solution for pipe inspection robot.
by Shannon X. Yang.
S.B.
APA, Harvard, Vancouver, ISO, and other styles
5

Mardešić, Pavao. "Déploiement versel du cups d'ordre n." Dijon, 1992. http://www.theses.fr/1992DIJOS047.

Full text
Abstract:
Dans ce travail nous considérons les singularités de germes de champs de vecteurs de type cusp d'ordre n, introduites par R. Roussarie. Nous donnons leur déploiement versel, ainsi qu'une description complète du diagramme de bifurcation (par rapport à l'équivalence topologique) du déploiement versel propose. Pour atteindre ce but, nous utilisons la notion de systèmes étendus complets de Chebychev (ECT-systèmes). Nous introduisons une relation d'équivalence (équivalence caractéristique) pour des familles engendrées par des ECT-systèmes et montrons l'universalité du diagramme de bifurcation (par rapport à l'équivalence caractéristique) pour des familles linéaires d'ECT-systèmes. Nous montrons ensuite la trivialité du diagramme de bifurcation pour les déformations d'une famille linéaire d'ECT-systèmes. Nous généralisons ce résultat à une famille d'applications déplacement d'une déformation d'un champ Hamiltonien ayant un lacet homoclinique. Certains résultats semblables ont été obtenus récemment et indépendamment par P. Joyal.
APA, Harvard, Vancouver, ISO, and other styles
6

Warnock, Jeffrey P. "Ducks, cups, bushes, planters, and statues." The Ohio State University, 2002. http://rave.ohiolink.edu/etdc/view?acc_num=osu1382711430.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Gillis, Carole. "Minoan conical cups : form, function and significance /." Göteborg : P. Aströms, 1990. http://catalogue.bnf.fr/ark:/12148/cb388953629.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Linder, Kelli Marie. "A Comparative Analysis of Two Prototype Smart Training Cups: An Iterative Process." Miami University / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=miami1461948535.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hallam, Deborah L. "The Bronze Age Funerary Cups of Northern England." Thesis, University of Bradford, 2015. http://hdl.handle.net/10454/14861.

Full text
Abstract:
Around the late third millennium BC small cup-shaped vessels began to appear in burial contexts across the North of England where they were found to be associated with Early Bronze Age funerary practices. Known by the name of incense cups, accessory vessels or miniature cups, their true purpose has been elusive. This study comprises an investigation of cups from Northern England and finds the tradition to be heavily influenced by Beaker culture practices resulting in the earliest cups emulating some attributes of Beaker ceramics. The Northern English Cup assemblage defies the current perception that all Cups are perforated as 63% are not; fabrics are found to be locally sourced and not imported and a review of the typology finds a strong regional adherence to the Food Vessel and Collared Urn tradition. Association in the grave with larger Urns is not as common as once believed and Cups have been found as the solitary ceramic indicating that they were important in their own right. Firing damage such as spalling has been interpreted as use of the funeral pyre for firing vessels prior to deposition with cremated remains and it is suggested that this is a recognisable signature of the cup tradition and therefore the name ‘funerary Cup’ is more appropriate. An active cross country trade network can be inferred from distributions of metalwork, precious materials and an affinity in some cases to Irish cups.
Prehistoric Society, Yorkshire Ladies Council for Education and the Andy Jagger Fund
APA, Harvard, Vancouver, ISO, and other styles
10

Youn, Duck-Sang. "Measurements on laser produced plasma using Faraday-cups." Thesis, Monterey, California. Naval Postgraduate School, 1989. http://hdl.handle.net/10945/26060.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Cups"

1

Connor, Nikki. Plastic cups. Brookfield, Conn: Copper Beech Books, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mark, St Germain, and Willy April Goodman ill, eds. Three cups. Nashville: Tommy Nelson, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Goodman, Willy April, ed. Three cups. [Dover, UK]: Three Cups, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Favilla, Candice. Cups: Poems. Athens: University of Georgia Press, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Germain, Mark St. Three cups. [Dover, UK]: Three Cups, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Tavita. World cups & saucers. Gadong]: Brunei Press Sdn. Bhd., 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Harran, Jim. Collectible cups & saucers. Paducah, KY: Collector Books, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Harran, Jim. Collectible cups & saucers. Paducah, KY: Collector Books, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Harran, Jim. Collectible cups & saucers. Paducah, KY: Collector Books, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Jones, Mirren. Eight of cups. Blairgowrie: EM People, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Cups"

1

Abramovits, William. "Cups." In Dermatological Cryosurgery and Cryotherapy, 99–100. London: Springer London, 2016. http://dx.doi.org/10.1007/978-1-4471-6765-5_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Beverland, David. "Cups." In The Corail® Hip System, 225–46. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-18396-6_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wolff, Jonas O., and Stanislav N. Gorb. "Suction Cups." In Biologically-Inspired Systems, 87–93. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-45713-0_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Buckingham, Will. "Three Cups." In Coffee, 125–37. Oxford, UK: Wiley-Blackwell, 2011. http://dx.doi.org/10.1002/9781444393385.ch10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Allan, Keith. "On Cups." In Dynamics of Language Changes, 125–37. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-6430-7_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Gooch, Jan W. "Ford Viscosity Cups." In Encyclopedic Dictionary of Polymers, 322. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_5226.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kenanidis, Eustathios, Eleftherios Tsiridis, Jacques Tabutin, and Pierre Marie Cambas. "Dual Mobility Cups." In The Adult Hip - Master Case Series and Techniques, 529–37. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-64177-5_26.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Anderson, Jeanne L. Hites, and Maurine Pyle. "No Tin Cups." In Making Change, 177–93. New York, NY : Routledge Books, 2020.: Routledge, 2020. http://dx.doi.org/10.4324/9781003009962-26.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hunt, Alana. "Cups of nun chai." In Kashmir and the Future of South Asia, 16–35. Abingdon, Oxon ; New York, NY : Routledge, 2021. | Series: Routledge contemporary south asia series: Routledge, 2020. http://dx.doi.org/10.4324/9781003119357-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Follador, Maurizio, Francesca Tramacere, Lucie Viry, Matteo Cianchetti, Lucia Beccai, Cecila Laschi, and Barbara Mazzolai. "Octopus-Inspired Innovative Suction Cups." In Biomimetic and Biohybrid Systems, 368–70. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-39802-5_37.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Cups"

1

Wang, Xiaofeng, Yuzhen Lin, Haosheng Hu, Chi Zhang, and Yao Kang. "Effect of Swirl Cup’s Venturi Shape on Spray Structure and Ignition Process." In ASME Turbo Expo 2014: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/gt2014-25216.

Full text
Abstract:
In a gas turbine engine combustor, combustion performance is tied to the spatial distribution of the fuel injected into the dome. Swirl cup, as an air blast atomizer, is widely used to provide a uniform presentation of fuel droplets to the combustor dome. In this paper, two swirl cups with different venturi angle have been studied: case 1 (with narrow venturi angle) and case 2 (with wide venturi angle). Kerosene is injected to the test domain through a simplex nozzle. The spatial distribution of droplet characteristics produced by the two swirl cups were measured using dual-phase Doppler anemometry (PDA). A single cup combustor has been built in order to characterize the swirl cups’ ignition phenomena. Spark ignition test has been performed for ground condition, two swirl cups’ lean ignition limits are obtained, and ignition sequences have been recorded by a high-speed video camera. Comparing the two swirl cups’ small droplets velocity, case 1 swirl cup produces a different velocity profile from typical swirl cup. The air stream outflowing from case 1 swirl cup just ran into the side wall. The droplet size around the spark plug of case 2 is smaller than case 1. Ignition test results show that case 2 swirl cup’s lean ignition limit is wider than case 1’s. Record of the ignition process deepened the understanding of spark ignition of the swirl diffusion flame. It takes some time for the kernel to anchor in swirl cup. The results demonstrate that swirl cup’s venturi shape strongly influence the spray structure. Thereby affect the combustor ignition performance.
APA, Harvard, Vancouver, ISO, and other styles
2

Maggi, Carmelo, Jan Wojnar, and Leonardo Tognarelli. "All-Purpose Packing Cups for Hyper Compressor." In ASME 2016 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/pvp2016-63256.

Full text
Abstract:
Hyper compressors are designed for LDPE production, compressing ethylene up to 3500bar with only two stages of compression, in order to reach conditions for the polymerization. The high operating and fluctuating pressure strongly impact design and life of all cylinder components. The packing cups are among the most stressed components of a hyper compressor cylinder. They are particularly subjected to very high pulsating pressures, thus fatigue and wear. Therefore, they are periodically replaced during maintenance and are critical for availability of the hyper compressor. A typical hyper compressor packing assembly contains 5 to 6 disc shaped packing cups that contain the plunger sealing rings at the internal diameter. The packing cups are provided with lube oil ducts to lubricate the sealing elements. Typically these ducts extend axially through the assembly to the injection points. For that purpose each packing cup could have a different number of lube oil passages. Moreover, at the external diameter are located passages for packing cooling oil. For these reasons each of the packing cups is a unique part with different machining features. In order to optimize the availability of spare parts and standardize the product, a new design of hyper compressor packing cups has been evaluated, called further “all-purpose packing cup”. The idea was to make the packing cups all equal to each other, and potentially to reduce manufacturing and warehousing costs. This idea has been realized by introducing in a single all-purpose cup, multiple sectors angularly offset with each other. Each sector contains the oil ducts required for a given cup position in the assembly. By rotating the cup about the plunger axis by e.g. 90° or 180° the desired sector can be activated (put in fluid communication with adjacent lube oil ducts). In this way the “all-purpose packing cup” can be mounted in each of the 5 to 6 different positions in the packing assembly. The all-purpose cup design has been analyzed by a well validated FEA approach on the high cycle fatigue and flaw propagation safety margins. The analysis was performed considering all multiple possible load combinations where, depending on the assembly configuration, different active lube oil holes (holes that deliver oil to the plunger) were pressurized while all remaining ducts were left unpressurized.
APA, Harvard, Vancouver, ISO, and other styles
3

Chung, Hyemin, Chia-Hsun Jackie Lee, and Ted Selker. "Lover's cups." In CHI '06 extended abstracts. New York, New York, USA: ACM Press, 2006. http://dx.doi.org/10.1145/1125451.1125532.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lee, Chia-Hsun Jackie, and Hyemin Chung. "Lover's cups." In ACM SIGGRAPH 2006 Research posters. New York, New York, USA: ACM Press, 2006. http://dx.doi.org/10.1145/1179622.1179781.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Campo, Nicola, and Francesco Chiesi. "Improved Design for Hypercompressor Packing Cups." In ASME 2007 Pressure Vessels and Piping Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/pvp2007-26269.

Full text
Abstract:
Second stage cylinders for polyethylene hyper compressors are among the most stressed pressure vessels in the industry. Due to the high operating pressure and pressure fluctuations between suction and discharge, these cylinders must be designed to withstand high fatigue loads. Packing cups are the most critical cylinder component and, in particular, the lube oil ducts are the bottleneck for reliability. This work deals with a structural optimization of packing cups focused on the most critical packing cup area: the lube oil hole. Various pre-compression techniques (i.e., shrink-fit and autofrettage) are used to improve the fatigue behavior. Longer life and reliability are investigated with advanced design techniques such as finite element modeling and design of experiments. New design cups with a 50% higher fatigue safety factor have been obtained.
APA, Harvard, Vancouver, ISO, and other styles
6

Chen, Yng-Ru, Michael Hölling, and J. Iwan D. Alexander. "Characterization of Cup Anemometer Dynamics." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-87480.

Full text
Abstract:
Cup anemometers are most commonly used for measuring wind speeds in the atmospheric boundary layer, among others for site assessment. The simple design of a cup anemometer consists of three cups mounted on a vertical shaft. Due to the difference in the drag coefficient of the open and the closed side of the cups the system is rotating, where the rotational frequency is proportional to the incoming wind speed. One downside of cup anemometers is their asymmetric dynamic response to accelerating and decelerating wind speeds under turbulent wind conditions. This asymmetry results in a systematic overestimation under turbulent wind conditions, the so-called over-speeding [3][4][5]. The goal of the presented experiments is to characterize the dynamical response of cup anemometers for decreasing wind velocities in particular. Additionally, the effect of different torques and an unbalanced system on the anemometer’s dynamics is investigated by adding rare earth magnets as weights to the cups. These characteristics are basis for the post processing of measured data under turbulent wind conditions. Regions of the measured time series that are dominated by the specific dynamics of the cup anemometer are therefore affected by over-speeding and should be excluded from further analysis. Systematic changes in the anemometer’s dynamics on the other hand, are indicators for damages e.g. wear of bearings or contamination of the cups [6].
APA, Harvard, Vancouver, ISO, and other styles
7

Jedenmalm, Anneli, Walther Leardini, Mara Zavalloni, and Saverio Affatato. "Effect of Head Surface Roughness and Sterilization Method on Wear of UHMWPE Acetabular Cups: Preliminary Hip Joint Simulator Results." In ASME 8th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2006. http://dx.doi.org/10.1115/esda2006-95512.

Full text
Abstract:
More than one million hip joint replacements are performed each year in the world. However, the implants do not last forever due to material limitations, even though the operation is successful. The most common material combination used today is a CoCr head articulating against an UHMWPE (Ultra High Molecular Weight Polyethylene) acetabular cup. Several investigations have shown that the metal head is roughened inside the body and thus accelerating wear of the polymer cup. The sterilization method is also known to have effect on the wear properties. In vitro wear tests are however usually performed with as new implants. This investigation aimed at study the impact of head surface roughness on wear of both sterilized and non-sterilized acetabular cups. A total of nine acetabular cup and head pairs were wear tested in a hip joint simulator for 2Million cycles (Mc) with bovine calf serum as lubricant. Wear was determined by weighing of all cups. The heads were of CoCrMo and the average initial head surface roughness was 15nm (Ra), measured with a white light interference profilometer. The roughening was produced with a SiC paper producing circular multidirectional wear tracks to a surface roughness of about 400nm (Ra). The cups were of UHMWPE and the sterilized cups were 3Mrad gamma-radiated in nitrogen. The surface roughness after wear test was unchanged for the roughened heads, while the initially smooth heads were slightly roughened. Preliminary results show that the rough heads increase the wear of the cups 2-fold. The γ-irradiation affected both wear- and soak rate.
APA, Harvard, Vancouver, ISO, and other styles
8

Karuppannan, Srinivasan, Bhirud Mehul, Gullapalli Sivaramakrishna, Raju D. Navindgi, and N. Muthuveerappan. "CFD Analyses of Flow in a Gas Turbine Combustor Swirl Cup." In ASME 2017 Gas Turbine India Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/gtindia2017-4725.

Full text
Abstract:
Swirl cups (hybrid atomizers) are being widely employed in aero gas turbine engine combustors for their established merits in terms of achieving satisfactory atomization over the entire combustor operating regime. Even though several investigators have worked on development of these swirl cups, there is a scanty data reported in literature relevant to their design. In the present study, flow behavior in a swirl cup assembled in a confined chamber similar to a gas turbine combustor has been analyzed. Flow analysis has been carried out using ANSYS Fluent and turbulence has been modeled using Realizable k-ϵ model. Six swirl cup configurations have been analyzed; mass flow ratio between primary and secondary swirler and venturi converging area ratio have been varied. The effect of these parameters on downstream flow field has been studied by analyzing the profiles of axial, tangential and radial velocities downstream of swirl cup. The size and shape of the recirculation zone has been analyzed and reported for all configurations. Also, the mass flow recirculated by swirl cup has been estimated and compared amongst the configurations analyzed. Data thus generated is very useful in designing such swirl cups of gas turbine combustors.
APA, Harvard, Vancouver, ISO, and other styles
9

Luo, Haodong, Zhaoye Li, Manli Li, Jie Shang, and Yinyin Zhang. "Design of Intelligent Cups." In 2019 IEEE 4th Advanced Information Technology, Electronic and Automation Control Conference (IAEAC). IEEE, 2019. http://dx.doi.org/10.1109/iaeac47372.2019.8997941.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kang, Lu, Alison L. Galvin, Zhongmin Jin, and John Fisher. "Modelling the Effects of Head Diameter and Cup Wall Thickness on Contact Mechanics and Wear of Cross-Linked UHMWPE Cups." In World Tribology Congress III. ASMEDC, 2005. http://dx.doi.org/10.1115/wtc2005-63474.

Full text
Abstract:
A three-dimensional contact-coupled wear model was developed and used to predict the long-term wear in both conventional and cross-linked ultra high molecular weight polyethylene (UHMWPE) cups, particular to examine the effect of the head diameter and the UHMWPE cup wall thickness. The wear factors were determined from the simulator testing of 28 mm diameter cups. The maximum contact pressure was found to decrease with the increase of head diameter up to 48 mm, corresponding to the decrease in the cup wall thickness for a fixed outside diameter of the cup. Volumetric wear rate was predicted to increase as the head size increased for the conventional UHMWPE, as well as the cross-linked UHMWPE, although at a much lower rate for the latter due to the smaller wear factor.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Cups"

1

Hao, Dongsheng, and Junjie Wang. Efficacy of applying vitamin E-diffused highly cross-linked polyethylene cups in total hip replacement: A meta-analysis. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, September 2021. http://dx.doi.org/10.37766/inplasy2021.9.0042.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Choi, James, Emily Haisley, Jennifer Kurkoski, and Cade Massey. Small Cues Change Savings Choices. Cambridge, MA: National Bureau of Economic Research, February 2012. http://dx.doi.org/10.3386/w17843.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

McAllester, David A., Pascal Van Hentenryck, and Deepak Kapur. Three Cuts for Accelerated Interval Propagation. Fort Belvoir, VA: Defense Technical Information Center, May 1995. http://dx.doi.org/10.21236/ada298215.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Francisco, Katie Elizabeth, and Sandra Starkey. Comfortable Elegance- Taking Cues from History. Ames: Iowa State University, Digital Repository, 2017. http://dx.doi.org/10.31274/itaa_proceedings-180814-260.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Buiter, Willem. Can Public Spending Cuts be Inflationary? Cambridge, MA: National Bureau of Economic Research, March 1988. http://dx.doi.org/10.3386/w2528.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Staszewski, James J. Visual Terrestrial Cues for Landmine Detection. Fort Belvoir, VA: Defense Technical Information Center, June 2007. http://dx.doi.org/10.21236/ada482370.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

House, Christopher, and Matthew Shapiro. Phased-In Tax Cuts and Economic Activity. Cambridge, MA: National Bureau of Economic Research, April 2004. http://dx.doi.org/10.3386/w10415.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Spieker, Elena A. Retraining Attentional Bias to Unhealthy Food Cues. Fort Belvoir, VA: Defense Technical Information Center, May 2013. http://dx.doi.org/10.21236/ad1012865.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Atencio, Julian James, and Carolynn P. Scherer. Counter Unmanned Aircraft System (CUAS) Implementation Storyline. Office of Scientific and Technical Information (OSTI), June 2020. http://dx.doi.org/10.2172/1638609.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Atencio, Julian, and Carolynn Scherer. CUAS Regulatory Authority in the United States. Office of Scientific and Technical Information (OSTI), August 2020. http://dx.doi.org/10.2172/1648053.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Cups' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography