Log in

Relevant bibliographies by topics / Cracking

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Cracking'

Author: Grafiati

Published: 4 June 2021

Last updated: 23 November 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Cracking.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Cracking"

1

Lavine, Marc S. "Cracking the problem of cracking cathodes." Science 370, no. 6522 (December 10, 2020): 1286.12–1288. http://dx.doi.org/10.1126/science.370.6522.1286-l.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

SHINOZAKI, Kenji. "Hot Cracking." JOURNAL OF THE JAPAN WELDING SOCIETY 89, no. 2 (2020): 140–47. http://dx.doi.org/10.2207/jjws.89.140.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Vail, Nicholas. "Cracking Shells." Texas A&M Law Review 5, no. 1 (October 2017): 133–53. http://dx.doi.org/10.37419/lr.v5.i1.4.

Full text

Abstract:

In early 2016, the International Consortium of Investigative Journalists released a report detailing thousands of leaked documents demonstrating how a Panamanian law firm had, for years, helped wealthy clients conceal their financial activities through the use of offshore shell companies. The Panama Papers, as the leaked documents came to be known, directed renewed attention at the use of shell companies. Shell companies are used by the world’s wealthy and powerful to lower their taxes, but are also used by tax evaders, criminal organizations, and terrorists. While much of the renewed attention has been directed at offshore tax havens such as Panama, the United States is itself considered a tax haven by many, largely due to states such as Delaware, which has long catered to individuals desiring secrecy. In response to the Panama Papers, numerous international jurisdictions have looked to strengthen their laws governing the creation of shell companies and considered the mechanisms used to facilitate exchanges of information. This Article will examine one of those responses—the European Union’s Anti-Money Laundering Directive—as an example of the changes the United States should apply to its own domestic laws and as an example of the multilateral framework needed to address a global issue. This Article will argue that the United States should follow the European Union’s Anti-Money Laundering Directive’s lead in strengthening its laws regarding the disclosure of beneficial ownership information, creating shared registers of beneficial owners, implementing penalties for noncomplying entities, and moving towards creating multilateral, as opposed to bilateral, agreements to combat the misuse of shell companies.

APA, Harvard, Vancouver, ISO, and other styles

4

Tamaki, Koreaki. "Reheat cracking." Journal of the Japan Welding Society 58, no. 1 (1989): 58–64. http://dx.doi.org/10.2207/qjjws1943.58.58.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Myung-Kwan Park. "Cracking MaxElide." English Language and Linguistics 16, no. 2 (August 2010): 273–99. http://dx.doi.org/10.17960/ell.2010.16.2.011.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Jones, N. "Cracking components." British Dental Journal 194, no. 9 (May 2003): 467. http://dx.doi.org/10.1038/sj.bdj.4810171.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Moeendarbary, Emad, and Guillaume Charras. "Hydraulic cracking." Nature Materials 14, no. 3 (February 20, 2015): 268–69. http://dx.doi.org/10.1038/nmat4229.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Cooter, Roger, and Claudia Stein. "Cracking biopower." History of the Human Sciences 23, no. 2 (April 2010): 109–28. http://dx.doi.org/10.1177/0952695110362318.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Stewart, D. Antwan. "Cracking Lobster." Callaloo 34, no. 4 (2011): 1007–8. http://dx.doi.org/10.1353/cal.2011.0210.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Carrasco, Silvia, and Tobias Meyer. "Cracking CRAC." Nature Cell Biology 12, no. 5 (May 2010): 416–18. http://dx.doi.org/10.1038/ncb0510-416.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Cracking"

1

Acey, S. "Heavy oil cracking." Thesis, Teesside University, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.371059.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Crumpacker, John R. "Distributed password cracking." Thesis, Monterey, California : Naval Postgraduate School, 2009. http://edocs.nps.edu/npspubs/scholarly/theses/2009/Dec/09Dec%5FCrumpacker.pdf.

Full text

Abstract:

Thesis (M.S. in Computer Science)--Naval Postgraduate School, December 2009.
Thesis Advisor(s): Dinolt, George. Second Reader: Eagle, Chris. "December 2009." Description based on title screen as viewed on January 27, 2010. Author(s) subject terms: Distributed password cracking, Berkeley Open Infrastructure for Network Computing (BOINC), and John the Ripper. Includes bibliographical references (p. 63-64). Also available in print.

APA, Harvard, Vancouver, ISO, and other styles

3

Schwarzer, Roland. "CRACking the Riddle." Doctoral thesis, Humboldt-Universität zu Berlin, Mathematisch-Naturwissenschaftliche Fakultät I, 2014. http://dx.doi.org/10.18452/17010.

Full text

Abstract:

In den vergangenen Jahren sind Lipide, Membranen und deren Organisationsformen mehr und mehr in den Fokus der biologischen Forschung gerückt. Es wurde vorgeschlagen, dass in zellulären Membranen selbstassemblierende, submikroskopische Aggregate aus Sphingolipiden, Cholesterol und bestimmten Proteinen existieren und man vermutet, dass insbesondere Viren diese “Lipid Rafts” für ihren Zusammenbau nutzen und auf diese Art ihre Proliferationseffizienz erhöhen. Gleichwohl sind die genaue biologische Funktion und auch die molekulare Basis der Assoziation bestimmter Protein mit Lipid Rafts auch weiterhin unbekannt. In der vorliegenden Arbeit wurde Fluoreszenz-Lebenszeit-Mikroskopie genutzt, um die Lipid-Raft-Anreicherung des HIV-1 Glycoproteins gp41 zu untersuchen. Förster-Resonanz-Energietransfer zwischen fluoreszenzmarkierten viralen und Raft-Marker-Proteinen wurde gemessen, um deren gemeinsame, lokale Aufkonzentrierung in Lipid Rafts nachzuweisen. Durch Verwendung verschiedener Deletions- und Mutationsvarianten des Proteins konnte nicht nur seine Lipid-Raft-Präferenz demonstriert, sondern auch das Cholesterol-Bindemotiv (CRAC) als entscheidender Faktor der lateralen Sortierung identifiziert werden. Wir haben in diesem Kontext auch eine systematische Zell-zu-Zell-Variabilität in unseren Daten bemerkt, die einen zugrundeliegenden zellbiologischen Mechanismus der Membranorganisation nahelegt. Mithilfe von Fluoreszenz-Polarisations-Mikroskopie konnte zudem eine klare CRAC-Abhängigkeit der gp41-Oligomerisierung aufgezeigt werden. Die von uns gewonnenen Daten erlauben einen tieferen Einblick in die molekulare Basis und die biologischen Folgen der cholesterol-abhängigen lateralen Proteinorganisation für Virusassemblierungsprozesse an biologischen Membranen.
In recent years, there has been a considerable interest in the molecular organization of biological membranes. It has been hypothesized that self-assembling, freely diffusing, submicroscopic domains consisting of sphingolipids, cholesterol and certain proteins exist and the prevailing view is that those lipid rafts serve as platforms for specific molecular interactions by the preferential exclusion and inclusion of proteins. It was presumed, that in particular viruses make use of plasma membrane lipid rafts to augment the infection process and spread efficiently. However, the exact biological function and physical basis of protein partitioning into microdomains remains an outstanding question in virus biology. In the present study, fluorescence lifetime imaging microscopy was used to study lipid raft partitioning of the HIV-1 glycoprotein gp41 by detecting Foerster Resonance Energy Transfer between fluorescently labeled viral and raft marker proteins in living cells. Plasma membrane microdomain association of gp41 was demonstrated and by introducing systematic mutations and truncations in different gp41 motifs, the cholesterol recognition amino acid consensus (CRAC) was identified as the crucial determinant of the lateral sorting. Interestingly, we observed a systematic cell-to-cell variability in our raft related data that suggests underlying cell-biological mechanisms of membrane organization. Moreover, fluorescence polarization microscopy revealed a distinct CRAC requirement for gp41 oligomerization whereas other properties, such as intracellular distribution and expression efficiency were clearly demonstrated to be CRAC independent. Our data provide further insight into the molecular basis and biological implications of the cholesterol dependent lateral protein sorting for virus assembly processes at cellular plasma membranes.

APA, Harvard, Vancouver, ISO, and other styles

4

Attou, Abdelkader. "Cracking and stress corrosion cracking in glass fibre materials using acoustic emission." Thesis, Robert Gordon University, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.277702.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Sayahi, Faez. "Plastic Shrinkage Cracking in Concrete." Licentiate thesis, Luleå tekniska universitet, Institutionen för samhällsbyggnad och naturresurser, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-133.

Full text

Abstract:

Early-age (up to 24 hours after casting) cracking may become problematic in any concrete structure. It can damage the aesthetics of the concrete member and decrease the durability and serviceability by facilitating the ingress of harmful material. Moreover, these cracks may expand gradually during the member’s service-life due to long-term shrinkage and/or loading. Early-age cracking is caused by two driving forces: 1) plastic shrinkage cracking which is a physical phenomenon and occurs due to rapid and excessive loss of moisture, mainly in form of evaporation, 2) chemical reactions between cement and water which causes autogenous shrinkage. In this PhD project only the former is investigated. Rapid evaporation from the surface of fresh concrete causes negative pressure in the pore system. This pressure, known as capillary pressure, pulls the solid particles together and decreases the inter-particle distances, causing the whole concrete element to shrink. If this shrinkage is hindered in any way, cracking may commence. The phenomenon occurs shortly after casting the concrete, while it is still in the plastic stage (up to around 8 hours after placement), and is mainly observed in concrete elements with high surface to volume ratio such as slabs and pavements. Many parameters may affect the probability of plastic shrinkage cracking. Among others, effect of water/cement ratio, fines, admixtures, geometry of the element, ambient conditions (i.e. temperature, relative humidity, wind velocity and solar radiation), etc. has been investigated in previous studies. In this PhD project at Luleå University of Technology (LTU), in addition to studying the influence of various parameters, effort is made to reach a better and more comprehensive understanding about the cracking governing mechanism. Evaporation, capillary pressure development and hydration rate are particularly investigated in order to define their relationship. This project started with intensive literature study which is summarized in Papers I and II. Then, the main objective was set upon which series of experiments were defined. The utilized methods, material, investigated parameters and results are presented in Papers III and IV. It has been so far observed that evaporation is not the only driving force behind the plastic shrinkage cracking. Instead a correlation between evaporation, rate of capillary pressure development and the duration of dormant period governs the phenomenon. According to the results, if rapid evaporation is accompanied by faster capillary pressure development in the pore system and slower hydration, risk of plastic shrinkage cracking increases significantly.

APA, Harvard, Vancouver, ISO, and other styles

6

Mitchell, Michael J. "Terrazzo cracking causes and remedies /." Connect to this title, 2008. http://scholarworks.umass.edu/theses/124/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Crump, Timothy. "Modelling dynamic cracking of graphite." Thesis, University of Manchester, 2018. https://www.research.manchester.ac.uk/portal/en/theses/modelling-dynamic-cracking-of-graphite(71e81d6f-e712-458c-aa48-0a256749258a).html.

Full text

Abstract:

Advances in dynamic fracture modelling have become more frequent due to increases in computer speed, meaning that its application to industrial problems has become viable. From this, the author has reviewed current literature in terms of graphite material properties, structural dynamics, fracture mechanics and modelling methodologies to be able to address operational issues related to the ageing of Advanced Gas-cooled Reactor (AGR) cores. In particular, the experimentally observed Prompt Secondary Cracking (PSC) of graphite moderator bricks which has yet to be observed within operational reactors, with the objective of supporting their plant life extension. A method known as eXtended Finite Element Method with Cohesive Zones (XCZM) was developed within Code_Aster open-source FEM software. This enabled the incorporation of velocity toughening, irradiation-induced material degradation effects and multiple 3D dynamic crack initiations, propagations and arrests into a single model, which covers the major known attributes of the PSC mechanism. Whilst developing XCZM, several publications were produced. This started with first demonstrating XCZM's ability to model the PSC mechanism in 2D and consequently that methane holes have a noticeable effect on crack propagation speeds. Following on from this, XCZM was benchmarked in 2D against literature experiments and available model data which consequently highlighted that velocity toughening was an integral feature in producing energetically correct fracture speeds. Leading on from this, XCZM was taken into 3D and demonstrated that it produced experimentally observed bifurcation angle from a literature example. This meant that when a 3D graphite brick was modelled that the crack profile was equivalent to an accepted quasi-static profile. As a consequence of this validation, the XCZM approach was able to model PSC and give insight into features that could not be investigated previously including: finer-scale heterogeneous effects on a dynamic crack profile, comparison between Primary and Secondary crack profiles and also, 3D crack interaction with a methane hole, including insight into possible crack arrest. XCZM was shown to improve upon previous 2D models of experiments that showed the plausibility of PSC; this was achieved by eliminating the need for user intervention and also incorporation of irradiation damage effects through User-defined Material properties (UMAT). Finally, while applying XCZM to a full-scale 3D graphite brick including reactor effects, it was shown that PSC is likely to occur under LEFM assumptions and that the Secondary crack initiates before the Primary crack arrests axially meaning that modal analysis would not be able to fully model PSC.

APA, Harvard, Vancouver, ISO, and other styles

8

Murray, Ian. "Cracking behaviour of clayey geomaterials." Thesis, University of Strathclyde, 2017. http://digitool.lib.strath.ac.uk:80/R/?func=dbin-jump-full&object_id=29273.

Full text

Abstract:

Cracking is a significant problem in the ceramics industry. It results in a substantial loss of production due to the discarded cracked wares associated. There is an understanding that cracking relates from restrained shrinkage and/or uneven drying. One of the solutions to this is to slow the rate of evaporation so that the wares dry more evenly. Such remedial measures are impractical due to the increase in drying space required. What is therefore required for the ceramics industry is a greater understanding of cracking and methods, which work within their manufacturing limitations, to reduce cracking susceptibility. Despite a number of studies, there is a lack of understanding surrounding the mechanisms of crack initiation. It is clear from experimental evidence that the vast majority of cracking occurs while the soil is still saturated or at the transition from saturated to unsaturated. Many researchers assume that cracking is governed by total stress, i.e. a crack initiates when the tensile stress generated in a soil during drying exceeds the tensile strength of the material. This research investigates the mechanism of crack initiation using an effective stress based approach. A new tensile testing device utilising high capacity tensiometers to allow for the measurement of (negative) pore-water pressure during testing and, hence, the characterisation of the effective stress state has been developed. The device has been designed to test clays in both saturated and unsaturated states. A series of tensile tests were performed on saturated clay samples prepared using non-de-aired and de-aired water. The results show that for non-de-aired tests, when suction approached the air-entry value, failure occurred at a deviatoric stress lower than the one corresponding to the critical state line derived from triaxial and uniaxial compression tests. For specimens with the slurry de-aired before slip casting the de-airing process realigned the deviator stress at failure recorded in the tensile test with the critical state line derived from uniaxial and triaxial compression tests. It could therefore be speculated that water cavitation is one of the mechanisms that can control rupture of clay when subjected to a (total) tensile stress state. Finally, failure data from tests on unsaturated specimens could be fairly modelled by the Mohr-Coulomb criterion extended to unsaturated states. These tests confirm that tensile failure is associated with failure in shear for both saturated and unsaturated states. Further validation of the shear failure mechanism is attempted via a numerical study using a simple coupled hydro-mechanical Finite Element Method (FEM) model to simulate the desiccation of a clayey soil to the point of crack initiation. The results of four laboratory desiccation tests of specimens with non-uniform geometry and different hydraulic boundary conditions are presented. These tests were simulated via FEM, and the time and location of cracking compared to test the validity of the model and the failure criterion. A greater understanding of the mechanism of cracking has then be used to test more practical remedial measures that can be used in the manufacture of ceramics to reduce cracking. These measures are based around altering the material mixes used in production process, as to this point the adjustment of the slip material relating to cracking has been done by a process of trial and error without guidance. The results of Finite Element Method simulations suggest creating a material with a more graded grain and pore-size distribution can reduce deviatoric stress development during uneven drying.

APA, Harvard, Vancouver, ISO, and other styles

9

Hopkinson, Andrew Christopher Graham. "Cracking of drying ceramic dispersions." Thesis, University of Cambridge, 2013. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.608101.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Scetta, Giorgia. "Fatigue cracking of thermoplastic elastomers." Electronic Thesis or Diss., Université Paris sciences et lettres, 2020. http://www.theses.fr/2020UPSLS022.

Full text

Abstract:

Les élastomères thermoplastiques de polyuréthane (TPU) sont une classe de copolymères à blocs caractérisés par une élasticité réversible et une excellente résistance à l'abrasion. Ils sont déjà utilisés dans un certain nombre d’applications de type caoutchouc telles que semelles, roues, câbles flexibles, etc. Pourtant, le comportement en fatigue du TPU sous chargement cyclique n'a pas été étudié en détail, et plusieurs questions restent ouvertes sur la meilleure façon de prédire la durabilité à long terme des TPU. En l'absence de procédure établie pour évaluer la résistance à la fatigue dans les TPU, nous avons proposé une méthode basée sur la propagation de fissure qui permet des comparer la résistance a fatigue des TPU avec les élastomères vulcanisés. On a caractérisé les propriétés mécaniques en petites et grandes déformations de trois TPU avec modules linéaires similaires mais des comportements différents en grandes déformations : adoucissement, rhéodurcissement et cristallisation sous contrainte. Contrairement aux élastomères vulcanisés, tous ces TPU se rigidifient avec la déformation. La diffusion des rayons X a été utilisée pour caractériser les changements de structure à des échelles microscopique induits au fond de fissure pendant le chargement cyclique. La remarquable résistance à la fatigue cyclique du TPU a été expliquée comme une conséquence de la modification de la structure locale des TPU qui génère un durcissement en fond de fissure empêchant le transfert des contraintes pendant le chargement cyclique. On a enfin proposé que ce rhéodurcissement vient de la fragmentation des domaines rigides en domaines plus petits mais plus nombreux qui agissent comme des points de réticulation physiques additionnels
Soft thermoplastic polyurethane elastomers (TPU) are a class of block copolymers characterised by a low linear modulus (<10MPa), reversible elasticity and excellent abrasion resistance already used in several rubber‐like applications such as soles, wheels, flexible cables, etc. Yet, their fatigue behaviour under cyclic loading has not been fully investigated so far, leaving several open questions about how predicting long‐term durability of TPUs for a safe design. In this work we proposed a reproducible experimental protocol to assess and compare the resistance to crack propagation in cyclic conditions of TPU, with that of classical filled rubbers by using a fracture mechanics approach. Furthermore, we characterized the mechanical response under cyclic loading at large and small strain of three commercial TPUs with similar linear moduli and rheology but different large strain behaviours: extended softening, strain hardening and strain hardening enhanced by SIC. Irrespectively of their composition, all TPUs presented an unconventional strain induced stiffening in step‐cyclic experiment. Using DIC and X‐Ray in situ experiments we showed that, the strain gradient at the crack tip generates a spatial re‐organization of the TPU microstructure consistent with a volume locally stiffer than the bulk. This heterogeneity in the deformability reduces the strain intensification at the crack tip explaining the high fatigue resistance in TPU. The local stiffening was ultimately associated to the fragmentation of original hard domains in smaller but more numerous units increasing the degree of physical crosslinking

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Cracking"

1

Young, Gary André. Cracking. Huntington, W. Va: University Editions, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Korpijaakko, Maria Leena. Cracking Facebook. Rotterdam: SensePublishers, 2015. http://dx.doi.org/10.1007/978-94-6300-211-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Knaddison, Greg. Cracking Drupal. New York: John Wiley & Sons, Ltd., 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Lewis, Jerry, Peter Nelson, Bill Richmond, and Arnold Orgolini. Cracking up. Burbank, CA: Warner Home Video, 2010.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Bose, C. V. Ananda, and Rajesh Purushothaman. Cracking coconut. Edited by India Coconut Development Board. Kochi: Coconut Development Board, Ministry of Agriculture, Government of India, 2012.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Peter, Lord. Cracking animation. London: Thames and Hudson, 1998.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Derry, Dillon, ed. Cracking up. Blackburn: Eprint, 2006.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Brian, Sibley, and Aardman Animations (Firm), eds. Cracking animation. London: Thames and Hudson, 1998.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Peter, Lord. Cracking animation. 3rd ed. New York: Thames & Hudson, 2010.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Martz, Geoff. Cracking the GED. 2nd ed. New York: Random House, 2008.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Cracking"

1

Kävrestad, Joakim. "Cracking." In Fundamentals of Digital Forensics, 93–103. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-96319-8_10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Gooch, Jan W. "Cracking." In Encyclopedic Dictionary of Polymers, 176–77. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_3031.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Kävrestad, Joakim. "Cracking." In Fundamentals of Digital Forensics, 123–33. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-38954-3_13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Hsu, Chang Samuel, and Paul R. Robinson. "Cracking." In Petroleum Science and Technology, 211–44. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-16275-7_11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Kerkstra, Randy, and Steve Brammer. "Cracking." In Injection Molding Advanced Troubleshooting Guide, 223–32. München: Carl Hanser Verlag GmbH & Co. KG, 2018. http://dx.doi.org/10.3139/9781569906460.024.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Kerkstra, Randy, and Steve Brammer. "Cracking." In Injection Molding Advanced Troubleshooting Guide, 231–40. 2nd ed. München: Carl Hanser Verlag GmbH & Co. KG, 2021. http://dx.doi.org/10.3139/9781569908358.024.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Kävrestad, Joakim, Marcus Birath, and Nathan Clarke. "Cracking." In Texts in Computer Science, 127–33. Cham: Springer International Publishing, 2024. http://dx.doi.org/10.1007/978-3-031-53649-6_13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Kerkstra, Randy, and Steve Brammer. "Cracking." In Injection Molding Advanced Troubleshooting Guide, 231–40. München, Germany: Carl Hanser Verlag GmbH & Co. KG, 2021. http://dx.doi.org/10.1007/978-1-56990-835-8_24.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Korpijaakko, Maria Leena. "Introduction." In Cracking Facebook, 1–14. Rotterdam: SensePublishers, 2015. http://dx.doi.org/10.1007/978-94-6300-211-0_1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Korpijaakko, Maria Leena. "Why People Use Facebook." In Cracking Facebook, 15–31. Rotterdam: SensePublishers, 2015. http://dx.doi.org/10.1007/978-94-6300-211-0_2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Cracking"

1

Pirk, Holger, Eleni Petraki, Stratos Idreos, Stefan Manegold, and Martin Kersten. "Database cracking." In the Tenth International Workshop. New York, New York, USA: ACM Press, 2014. http://dx.doi.org/10.1145/2619228.2619232.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

"Cracking in Prestressed Concrete Structures." In SP-113: Cracking in Prestressed Concrete Structures. American Concrete Institute, 1989. http://dx.doi.org/10.14359/3006.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

"Cracking of Partially Prestressed Concrete Beams." In SP-113: Cracking in Prestressed Concrete Structures. American Concrete Institute, 1989. http://dx.doi.org/10.14359/2999.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Mishra, Mayank, Shruti Kunde, and Manoj Nambiar. "Cracking the monolith." In ECSA '18: 12th European Conference on Software Architecture. New York, NY, USA: ACM, 2018. http://dx.doi.org/10.1145/3241403.3241440.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Gribble, Jim, Alexandria Hansen, Danielle Harlow, and Diana Franklin. "Cracking The Code." In IDC '17: Interaction Design and Children. New York, NY, USA: ACM, 2017. http://dx.doi.org/10.1145/3078072.3084307.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Rumsey, Clare A., Quinn Burke, and Chris Thurman. "Cracking the Code." In SIGCSE '17: The 48th ACM Technical Symposium on Computer Science Education. New York, NY, USA: ACM, 2017. http://dx.doi.org/10.1145/3017680.3022424.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Lally, Vic, and Maarten de Laat. "Cracking the code." In the Conference. Morristown, NJ, USA: Association for Computational Linguistics, 2002. http://dx.doi.org/10.3115/1658616.1658640.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Makarov, Vadim. "Cracking quantum cryptography." In 12th European Quantum Electronics Conference CLEO EUROPE/EQEC. IEEE, 2011. http://dx.doi.org/10.1109/cleoe.2011.5943438.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Searer, Gary R., Terrence F. Paret, Joseph Valancius, and James C. Pan. "Cracking in Concrete Fill on Metal Decks, Cracking in Flat Plate Concrete Slabs, and Cracking in Concrete Walls." In Structures Congress 2009. Reston, VA: American Society of Civil Engineers, 2009. http://dx.doi.org/10.1061/41031(341)252.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

"Cracking in Partially Prestressed Beams Under Static and Fatigue Loading." In SP-113: Cracking in Prestressed Concrete Structures. American Concrete Institute, 1989. http://dx.doi.org/10.14359/2998.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Cracking"

1

Backus, David, and Jonathan Wright. Cracking the Conundrum. Cambridge, MA: National Bureau of Economic Research, September 2007. http://dx.doi.org/10.3386/w13419.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Marra, James. MacroscoMacroscopic Cracking Determination in LaBS Glasspic Cracking Determination in LaBS Glass. Office of Scientific and Technical Information (OSTI), August 2005. http://dx.doi.org/10.2172/881503.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Parkins. L51623 Environment Sensitive Cracking (Low pH Stress-Corrosion Cracking) of High Pressure Pipelines. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), August 1990. http://dx.doi.org/10.55274/r0010308.

Full text

Abstract:

This is a review of the current situation relating to transgranular environment sensitive cracking of the type experienced on an in-service pipeline, by comparison with the commoner intergranular cracking experienced on many systems. It is probable that the cracking is not unique. Quite apart from the crack paths, there are other significant differences between the conditions in which the two types of cracking occur, particularly in relation to the environments involved, and sufficiently so to indicate that the mechanisms of cracking are different. The circumstances in which the two types of environment form are discussed. If the creation of a reliable model for practical application to transgranular cracking is to be achieved, there is need for data relating to the effects of stressing conditions upon the crack nucleation and� growth rates of such cracks and of the circumstances in which these cracks coalesce.

APA, Harvard, Vancouver, ISO, and other styles

4

Lee, Eun U., Bruce A. Pregger, Robert E. Taylor, and Charles Lei. Biaxial Fatigue Cracking from Notch. Fort Belvoir, VA: Defense Technical Information Center, March 2013. http://dx.doi.org/10.21236/ada575515.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Silling, Stewart Andrew, and Abe Askari. Peridynamic model for fatigue cracking. Office of Scientific and Technical Information (OSTI), October 2014. http://dx.doi.org/10.2172/1160289.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Chang, Keh-Minn, Bernard Cooper, and Bruce Kang. High-Temperature Fatigue Cracking Mechanisms. Fort Belvoir, VA: Defense Technical Information Center, August 2001. http://dx.doi.org/10.21236/ada388896.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Bell, G. (Irradiation assisted stress corrosion cracking). Office of Scientific and Technical Information (OSTI), April 1990. http://dx.doi.org/10.2172/7010172.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Gee, M., T. Fry, H. Jones, C. Green, and T. Roach. Fracture and cracking in coatings. National Physical Laboratory, May 2022. http://dx.doi.org/10.47120/npl.mat103.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Beavers, Leis, and Eiber. L51517 Stress Corrosion Cracking Research. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), June 1986. http://dx.doi.org/10.55274/r0010597.

Full text

Abstract:

The objective of the Stress-Corrosion Cracking (SCC) Phase of the NG-18 program is to develop an understanding of the causes of external SCC and methods of controlling it on new and existing gas transmission pipelines. An overview of past and proposed NG-18 programs designed to address this objective is given in Figure 1 in the Introduction Section, where it can be seen that the research has been divided into two categories, SCC mitigation and life estimation. The research carried out in 1985 at BCD focused on several areas under these categories: (1) the development of resistant steels and surfaces, and (2) the development of a crack growth/life prediction model. In the former, three experimental tasks were carried out in 1985, deformation response behavior, grain boundary chemistry, and surface effects. In the latter, a preliminary investigation of slip related models for describing SCC was carried out. Accomplishments on these tasks are described below.

APA, Harvard, Vancouver, ISO, and other styles

10

Lu, S. C. Hydrogen-induced cracking of drip shield. Office of Scientific and Technical Information (OSTI), August 1999. http://dx.doi.org/10.2172/12724.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!