Dissertations / Theses on the topic 'Corrosion inhibitor'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 dissertations / theses for your research on the topic 'Corrosion inhibitor.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
Shkirskiy, Viacheslav. "Corrosion inhibition of galvanized steel by LDH - inhibitor hybrids : Mechanisms of Inhibitor Release and Corrosion Reactions." Thesis, Paris 6, 2015. http://www.theses.fr/2015PA066216/document.
Full textThe current work was dedicated to the investigation of the fundamental mechanisms of the action of a layered double hydroxide (LDH) inhibitor hybrid coated systems for the corrosion protection of galvanized steel. The objective of the work was achieved by the realization of three milestones: (1) the identification of the effective water soluble inhibitor on Zn and steel substrates and the understanding the mechanisms of its action, (2) the revealing the factors and mechanisms controlling the release of the selected inhibitor from Zn2Al/-LDH hosts and (3) the understanding the mechanisms of coated system controlled by inhibitor release and its action. MoO42- showed the best inhibition efficiency comparable to CrO42- in alkaline and neutral solutions. The protective properties of MoO42- were assigned to the fast formation of Mo(V) film. The effect of MoO42- on the dissolution of low carbon steel was also verified to exclude the possible accelerating effect of chosen species. The leaching tests showed that MoO42- release from LDH was controlled by the nature of the exchanged ions from the media by ion-exchange mechanism at neutral pH and by the dissolution of the LDH framework at alkaline pH. The presence of only Cl- resulted in less than 40 % of MoO42- release after 24 hours of the immersion while the additions of the carbonates resulted in 100 % release after 1 hour. The immersion tests showed slight inhibiting effect of coated system in Cl and high in CO32- medias coherent with higher level of MoO¬42- released. The ways to control the inhibitor release and hence, the inhibition performance of coated systems were discussed in the vein of environment composition
Ahmed, Mohamed. "Inhibition of mild steel corrosion in cooling systems by low- and non-toxic corrosion inhibitors." Thesis, University of Manchester, 2017. https://www.research.manchester.ac.uk/portal/en/theses/inhibition-of-mild-steel-corrosion-in-cooling-systems-by-low-and-nontoxic-corrosion-inhibitors(7dc2367d-7352-4ab2-85b1-39b09d6487d8).html.
Full textPetersen, Adam George. "An ultrasound-based test for corrosion inhibitor persistency." Thesis, University of Cambridge, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.620324.
Full textWang, Hansheng. "Electrochemical investigation of "green" film-forming corrosion inhibitors :." Thesis, KTH, Skolan för kemivetenskap (CHE), 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-40888.
Full textHeiyantuduwa, Rukshani. "Performance of a penetrating corrosion inhibitor in controlling carbonation induced corrosion in reinforced concrete." Master's thesis, University of Cape Town, 2001. http://hdl.handle.net/11427/11581.
Full textReinforcement corrosion in concrete remains the most serious cause of premature deterioration of concrete structures world-wide, and many methods have been proposed to combat this problem. One method of improving the durability of concrete in aggressive environments is the use of corrosion inhibitors. In this work the effectiveness of an organic penetrating corrosion inhibitor in reducing the rate of corrosion and delaying the onset of corrosion in carbonated concrete is discussed, with reference to corrosion rates.
Frey, Abigael. "A Mathematical Model of a Corrosion System Containing Inhibitors." University of Akron / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=akron1525449155620077.
Full textYang, Lin. "Corrosion inhibitor system for superprimer coatings on aerospace alloys." Cincinnati, Ohio : University of Cincinnati, 2005. http://www.ohiolink.edu/etd/view.cgi?acc%5Fnum=ucin1135970650.
Full textTitle from electronic thesis title page (viewed Apr. 20, 2006). Includes abstract. Keywords: corrosion-inhibitive paint pigments; aerospace alloys. Includes bibliographical references.
YANG, LIN. "CORROSION INHIBITOR SYSTEM FOR SUPERPRIMER COATINGS ON AEROSPACE ALLOY." University of Cincinnati / OhioLINK, 2005. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1135970650.
Full textSeong, Jinwook. "Inhibition of Corrosion and Stress Corrosion Cracking of Sensitized AA5083." The Ohio State University, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=osu1429701294.
Full textZhang, Fan. "The Mussel Adhesive Protein (Mefp-1) : A GREEN Corrosion Inhibitor." Doctoral thesis, KTH, Yt- och korrosionsvetenskap, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-123489.
Full textQC 20130610
Stone, Erica. "EFFECTS OF ORTHOPHOSPHATE CORROSION INHIBITOR IN BLENDED WATER QUALITY ENVIRONMENTS." Doctoral diss., University of Central Florida, 2008. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/2961.
Full textPh.D.
Department of Civil and Environmental Engineering
Engineering and Computer Science
Environmental Engineering PhD
Canto, Maya Christian M. "Effect of Wall Shear Stress on Corrosion Inhibitor Film Performance." Ohio University / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1447954894.
Full textHansen, Joan Elizabeth. "A study of polymeric corrosion inhibitors for copper." Case Western Reserve University School of Graduate Studies / OhioLINK, 1994. http://rave.ohiolink.edu/etdc/view?acc_num=case1057601491.
Full textLeong, Hoi San. "Effect of corrosion inhibitor and laser surface treatment on corrosion behavior of steel used in chilling system." Thesis, University of Macau, 2011. http://umaclib3.umac.mo/record=b2550589.
Full textLi, Chong. "Effect of Corrosion Inhibitor on Water Wetting and Carbon Dioxide Corrosion in Oil-Water Two-Phase Flow." View abstract, 2009. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&res_dat=xri:pqdiss&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&rft_dat=xri:pqdiss:3371584.
Full textWinkler, Jonathan M. "Structural performance evaluation of the Postrite post-treatment corrosion inhibitor system." Thesis, This resource online, 1996. http://scholar.lib.vt.edu/theses/available/etd-08222008-063213/.
Full textAjayi, Fredric. "Mitigating corrosion risks in oil and gas equipment by electrochemical protection : top of the line corrosion." Thesis, University of Manchester, 2015. https://www.research.manchester.ac.uk/portal/en/theses/mitigating-corrosion-risks-in-oil-and-gas-equipment-by-electrochemical-protection-top-of-the-line-corrosion(550870a4-9373-4872-a076-a52f48a5a4f2).html.
Full textGuan, Xiaotao. "IMPACT OF ZINC ORTHOPHOSPHATE INHIBITOR ON DISTRIBUTION SYSTEM WATER QUALITY." Doctoral diss., University of Central Florida, 2007. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/3294.
Full textPh.D.
Department of Civil and Environmental Engineering
Engineering and Computer Science
Environmental Engineering PhD
Marek, Martin. "Progresivní bednící systém s protikorozní ochrannou funkcí." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409764.
Full textHuynh, Ngoc Huu. "The Inhibition Of Copper Corrosion In Aqueous Environments With Heterocyclic Compounds." Thesis, Queensland University of Technology, 2004. https://eprints.qut.edu.au/15951/1/Ngoc_Huu_Huynh_Thesis.pdf.
Full textHuynh, Ngoc Huu. "The Inhibition Of Copper Corrosion In Aqueous Environments With Heterocyclic Compounds." Queensland University of Technology, 2004. http://eprints.qut.edu.au/15951/.
Full textGriffin, Allian Sophia. "Corrosion in New Construction:Elevated Copper, Effects of Orthophosphate Inhibitors, and Flux Initiated Microbial Growth." Thesis, Virginia Tech, 2010. http://hdl.handle.net/10919/76951.
Full textMaster of Science
Holmér, Camilla. "Study of green film-forming corrosion inhibitor based on mussel adhesive protein." Thesis, KTH, Skolan för kemivetenskap (CHE), 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-143553.
Full textChilukuri, Anusha. "Corrosion Inhibition by Inorganic Cationic Inhibitors on the High Strength Aluminum Alloy, 2024-T3." The Ohio State University, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=osu1343784869.
Full textAkbar, Abdulmuhsen. "Understanding the interactions between corrosion scales and inhibitor films in flow conditions." Thesis, University of Leeds, 2013. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.614641.
Full textXiong, Yao. "AFM studies of the Metallicity of Single-walled Carbon Nanotubes and Corrosion Inhibitor Adsorption." Ohio University / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1307457679.
Full textModesto, Marina Gracinda. "Avaliação do molibdato de sódio, tungstato de sódio e um copolímero a base de silano como inibidores de corrosão para o aço carbono ABNT 1005 em meio de NaCI 3,5%." Universidade de São Paulo, 2008. http://www.teses.usp.br/teses/disponiveis/3/3137/tde-10112008-112012/.
Full textThe aim of this study is to evaluate the sodium molybdate (Na2Mo4), sodium tungstate (Na2WO4) and polydimethyl-siloxane modified copolymer (CPPM) as corrosion inhibitors for the carbon steel ABNT 1005 in 3,5% NaCl media. The metal substrate was exposed in the media with absence and presence of increasing concentrations of the investigated substances. The techniques used were: mass loss tests; open circuit potential; potentiodynamic polarization (Cpol) and electrochemical impedance spectroscopy (EIS). For comparative purpose, mass loss testes were carried out in seawater and in 3,5% NaCl. The results showed that carbon steel ABNT 1005 corrosion rate in seawater is lower than the corrosion rate at 3,5% NaCl. The Na2Mo4 and Na2WO4 corrosion potentials showed more positive values than their absence, indicating an anodic inhibitor behavior. The parameters obtained by EIS technique showed that for the Na2MoO4 the best time of immersion was 6 hours and the Na2WO4 was 12 hours, with efficiencies of 70% and 77% respectively. The Cpol results confirmed the anodic behavior as corrosion inhibitors of the Na2MoO4 and Na2WO4 for carbon steel ABNT 1005 in 3,5% NaCl. After 24 hours of immersion in 1,0x10-2 mol.L-1 Na2MoO4 presence, the corrosion inhibition efficiency estimed using Tafel extrapolation was 82%. In the 1x10-2 mol.L-1 Na2WO4 presence after 24 hours of immersion, the efficiency obtained was 65%. The CPPM results showed it not acting as corrosion inhibitor for carbon steel ABNT 1005 in 3.5% NaCl.
Allison, Crispin. "Flexible liners for corrosion protection of pipelines." Thesis, Cranfield University, 2012. http://dspace.lib.cranfield.ac.uk/handle/1826/7388.
Full textAlshehri, Abdulrahman. "IMPACT OF CORROSION INHIBITOR BLENDED ORTHOPHOSPHATE ON WATER QUALITY IN WATER DISTRIBUTION SYSTEMS." Doctoral diss., University of Central Florida, 2008. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/3248.
Full textPh.D.
Department of Civil and Environmental Engineering
Engineering and Computer Science
Environmental Engineering PhD
Chokshi, Kunal. "A Study of Inhibitor-Scale Interaction in Carbon dioxide Corrosion of Mild Steel." Ohio University / OhioLINK, 2004. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1089819131.
Full textLu, Donghui. "The influence of inhibitor ions on localized corrosion of Al and Al alloys /." The Ohio State University, 2000. http://rave.ohiolink.edu/etdc/view?acc_num=osu1488202171196922.
Full textChokshi, Kunal K. "A study of inhibitor-scale interaction in carbon dioxide corrosion of mild steel." Ohio : Ohio University, 2004. http://www.ohiolink.edu/etd/view.cgi?ohiou1089819131.
Full textOssorio, Dominguez Anile. "Análise comparativa de inibidores de corrosão na água poro e no concreto armado para aço carbono CA-50." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2016. http://hdl.handle.net/10183/148761.
Full textIn this paper it is analyzed the behavior of reinforcing steel against corrosion using inhibitors: sodium nitrate, sodium phosphate and ethanolamine in water contaminated with chlorides pore and concrete, in order to analyzing the results and different mechanisms. To meet the objective of this work, it was divided into two stages, a first stage based on synthetically simulate the pore water of a concrete, through the following solution KOH 28g/l+NaOH 4g/l, this same solution simulated pore water to a marine environment it would be KOH 28g/l + NaOH 4g/l+NaCl 35g/l, it is then incorporated into both reference solutions inhibitors in a proportion, (20g/l de cada um). Assays were performed electrochemical impedance spectroscopy (EIE) (last 3 hours and 72 hours of immersion) and polarization curves (last 72 hours of immersion) in order to obtain responses corrosion kinetics in each solution. the best performance was obtained in the pore water. In the case of water contaminated with chlorides pore, the best performance was obtained in the presence of sodium nitrite inhibitor. In the second step was performed only with the inhibitor sodium nitrate, as statistically efficiencies of the three inhibitors were similar. Sodium nitrate was analyzed in real samples of reinforced concrete contaminated with chlorides of sodium. So they were chosen two types of cement CP- IV and CP-V, cement water three relationships 0.4, a/c-0.5, a/c- 0.65. In this case to simulate the marine environment, accelerated tests were performed chloride. They were compared the methods of analysis, simulated synthetically and simulated in real concrete.
Tavassoli-Salardini, Fereshteh, of Western Sydney Nepean University, and Faculty of Science and Technology. "Inhibition of mild steel corrosion in aqueous media with sodium propionate." THESIS_FST_XXX_TavassoliSalardini_F.xml, 1996. http://handle.uws.edu.au:8081/1959.7/233.
Full textDoctor of Philosophy (PhD)
YANG, HAI. "PLASMA TREATMENT OF ORGANIC INHIBITORS FOR CORROSION PROTECTION OF AEROSPACE ALLOYS." University of Cincinnati / OhioLINK, 2003. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1058383366.
Full textSantos, Isis Valença de Sousa. "Filmes de benzotriazol sobre materiais ferrosos: formação, eficiência, resistência, efeito de aditivos e do transporte de massa." Universidade de São Paulo, 2003. http://www.teses.usp.br/teses/disponiveis/46/46132/tde-12022016-123029/.
Full textBenzotriazole (BTAH) films formed on carbon steel and 316L stainless steel have been studied in sulfuric and chloridric acids and in sodium choride solutionsat 25°C. Different aspects were considered: the film formation conditions, its efficiency, its resistance, the presence of additives and the effect of mass transport on the reaction mechanism. Open circuit potential measurements, weight loss experiments, potenciostatic and potentiadynamic polarization curves using stationary and rotating disc electrode, chronoamperometry, electrochemical impedance spectroscopy, optical and scanning electron microscopies and energy dispersive surface analysis have been used as techniques. BTAH have shown inhibitive effect over the majority of the systems studied. The film resistance depends on the presence of the inhibitor in the solution but the result is different if the film is formed in solution containing additives as copper (II) ions or cations obtained from 304 SS dissolution in H2SO4 media; in this case the films resist to chloridric acid media without BTAH. Dodecyltrimetilammonium chloride presents synergism on the inhibitive BTAH action forcarbon steel in acid solution. The BTAH mass transport represents an important step on the film formation mechanism. BTAH is also an effective inhibitor for carbon steel covered by epoxy primer when it is added to the primer or when the film is formed on the carbon steel surface from a H2SO4 solution containing BTAH.
Grari, Olfa. "Amélioration des propriétés physico-chimiques et anticorrosives du revêtement de polypyrrole électrodéposé sur l'acier inoxydable 304." Thesis, Besançon, 2015. http://www.theses.fr/2015BESA2041/document.
Full textThe aim of this work is to electrochemically elaborate polypyrrole films on 304 stainless steel in phosphoric acid solution and improve corrosion resistance by the use of high frequency ultrasound (US), incorporation of inorganic inhibitor (KNO3) and silica (SiO2) particles. The inorganic inhibitor reduced the oxidation potential of pyrrole monomers and was incorporated into polymer matrix. Ultrasound favors electrochemical polymerization reaction by improving mass transfer towards the electrode. It leads to films more compact, presenting a thinner and more homogeneous topography. PPy-SiO2 composite films were prepared by different methods. Good particles distribution within polymer matrix was achieved through multilayered method. All formed films: PPy-NO3-, PPy-US and PPy-SiO2 offer better protection of stainless steel against corrosion in chloride environment than PPy coatings
Costa, Thiago Santangelo. "Obtenção do copolímero de acrilonitrila e vinil-tetrazol e sua aplicação como inibidor de corrosão para meio ácido." Universidade do Estado do Rio de Janeiro, 2007. http://www.bdtd.uerj.br/tde_busca/arquivo.php?codArquivo=2803.
Full textHeterocyclic polymers enclose a great variety of materials, since simple linear polymers synthesized from monomers of vinyl heterocyclics to polymers highly functionalized and crosslinked. In this work was carried out the chemical modified of polyacrilonitrile with incorporation of tetrazole groups in different quantities (1%, 2,5%, 5% and 10%). The acrilonitrile and vinyl-tetrazole copolymers were characterized by FTIR and its thermal behavior analyzed by DSC and TGA. The heterocyclic polymers were evaluated as corrosion inhibitor to carbon steel in acidic medium. It was obtained good results and in some cases inhibitor efficient average higher than 70% were reached
Faustin, Milcard. "Étude de l'effet des alcaloïdes sur la corrosoion de l'acier C38 en milieu acide chlorhydrique 1M : application à Aspidosperma album et Geissospermum laeve (Apocynacées)." Thesis, Antilles-Guyane, 2013. http://www.theses.fr/2013AGUY0578/document.
Full textThis work is devoted to the corrosion inhibition of C38 steel in 1M HCL acid medium by alkaloids extracts from two plants : aspidosperma album and geissospermum laeve. Biodegradable and environmentally friendly, alkaloids could be used temporarily to prevent the corrosion of C38 steel with inhibition rates higher than those described in the literature. The first part of this work studies the influence of concentration, immersion time and temperature on the corrosion inhibitor by electrochemical measurements : polarization curves and electrochemical impedance spectroscopy. The surface analyses conducted by scanning electron microscopy showed the presence of a layer composed of an iron oxide mixture incorporating alkaloids extracts and which leads to the decrease of the corrosion rate. The second part of this work was devoted to the isolation of alkaloids of two extracts in order to determine the alkaloids responsible of the inhibitory activity and thus to determine the adsorption mechanisms. It was showed that the major alkaloids of two extracts is responsible of the inhibition activity
Ben, Mansour Hela. "Etude du comportement à la corrosion des armatures tendues dans le béton contaminé par des ions chlorure : Effet anticorrosif d’un inhibiteur à base de phosphates." Thesis, Lyon, 2018. http://www.theses.fr/2018LYSEI085/document.
Full textCorrosion in prestressed concrete is considered among the most dangerous pathologies in the civil engineering sector. Indeed, this phenomenon is characterized by the seriousness of its economic and security consequences. The objective of this work is to evaluate the efficiency of a phosphate based inhibitor Na3PO4.12H2O against the corrosion of prestressing steels. The study was first conducted on wires tensioned at 80% Rm and immersed in simulating concrete pore solution. Then it concerned, on one hand, prestressed mortar specimens designed on a laboratory scale and, on the other hand, the long term efficiency of the inhibitor using diffusion cell technique. The results obtained from the study carried out in the concrete simulating medium revealed that the presence of the phosphates causes the increase in the critical threshold of localized corrosion initiation R = [Cl -] / [OH-] up to the value of 5 instead of 0.4. This seems to be due to two phosphate inhibiting actions, namely: the stabilization of the iron oxide protective layer and the formation of very insoluble phosphate compounds which block the active anodic sites, increasing prestressing steel resistance to localized corrosion. The use of Na3PO4.12H2O as an additive slightly reduces the compressive strength of the mortar. However, phosphate compounds resulting from the reaction of the inhibitor with the cement hydrates clog the pores of the mortar and slow down the diffusion of the chlorides. This improves the corrosion behavior of prestressed mortar reinforcement. Finally, when sodium triphosphate is used as a migratory inhibitor or as a means of steel reinforcement pretreatment, the diffusion cell technique has shown its long-term efficiency, thanks to the increase of the period preceding the initiation of a localized corrosion, where the reinforcement is in a passive state
Menezes, Richard Joseph. "An experimental study of corrosion inhibitor performance and slug flow characteristics in horizontal multiphase pipelines." Ohio : Ohio University, 1994. http://www.ohiolink.edu/etd/view.cgi?ohiou1178135456.
Full textZvandasara, Tendayi. "Influence of hydrodynamics on carbon steel erosion-corrosion and inhibitor efficiency in simulated oilfield brines." Thesis, University of Glasgow, 2010. http://theses.gla.ac.uk/2284/.
Full textTinani, Suraj P. "Techniques to Analyze Underdeposit Corrosion." Case Western Reserve University School of Graduate Studies / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=case1272643724.
Full textChevalier, Maxime. "Étude de l'effet des alcaloïdes de deux espèces d'arbres guyanaises (Xylopia) sur la corrosion de l'acier C38 en milieu hydrochlorydrique 1M : études électrochimiques et phytochimiques." Thesis, Antilles, 2015. http://www.theses.fr/2015ANTI0099.
Full textToday, the research and development of ecofriendly biosourced inhibitor have gained a great interest. The laboratory L3MA is involved in the research and characterization of alkaloids isolated from plants growing wild in Guyana as corrosion inhibitor.The present work continues to focus on the broadening application of plant extracts for metallic corrosion control and reports on the inhibiting effect of alkaloidic extract from two plants: Xylopia frutescens and Xylopia cayennensis. The molecules used are considered like ecofriendly and can be used as corrosion inhibitor of C38 steel. More than 90% of efficiency was obtained. The same workflow was used for each plant: firstly the study of the total alkaloidic extract with polarization curves and electrochemical impedance spectroscopy. In second time, the alkaloidic extract is chromatographied and the main composants are isolated and identified. These main components are tested as corrosion inhibitor, to determine the mode of action and the adsorptions’ forms. XPS and SEM studies confirmed that the plants alkaloidics extracts and the main composants are strongly adsorbed onto the steel surface
Al-Asadi, Akram A. "Iron Carbide Development and its Effect on Inhibitor Performance." Ohio University / OhioLINK, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1416422709.
Full textAranha, Hernani. "O benzotriazol (BTAH) como inibidor de corrosão do aço inoxidável tipo 304 imerso em banhos de decapagem ácido." Universidade de São Paulo, 1994. http://www.teses.usp.br/teses/disponiveis/46/46132/tde-21122015-145730/.
Full textThe electrochemical behaviour of 304 stainless steel in sulfuric acid media containing benzotriazole (BTAH), was studied at different temperatures, using reagents of different purity grades. Weight loss experiments, open circuit potential measurements, anodic and cathodic potentiostatic polarisation curves and corrosion product analysis by atomic emission spectrometry were made. This study had as objective to evaluate the BTAH perfonnance as corrosion inhibitor in H2SO4 pick1ing baths. BTAH showed to be an effective inhibitor for 304 SS on the entire range of acid concentration and at alI studied temperatures . Inhibitor efficiency decreases as the temperature or acid concentration mcrease. The inhibitive film obeys to Langmuir isothenn, at 28,0 °C as well at 70,0 °C, and free energy adsorption values suggest chemical adsorption. The impurities present in the reagents have little effect on the inhibitor efficiency. Potentiostatic studies have shown that BTAH is an anodic inhibitor on the entire range of potential and at alI studied temperatures. The principal result for pickling baths aplication are that BTAR prevents the steel corrosion, but it does not avoid the scale dissolution and it does not promote selective steel dissolution.
Coimbatore, Dhandayuth Venkatesh. "Cerium chloride inhibition for high strength low alloy steel exposed to sulphide polluted seawater." University of Western Australia. School of Mechanical Engineering, 2008. http://theses.library.uwa.edu.au/adt-WU2008.0134.
Full textYang, Yuan Feng. "Calcium and magnesium containing anti-corrosion films on mild steel." Thesis, University of Manchester, 2010. https://www.research.manchester.ac.uk/portal/en/theses/calcium-and-magnesium-containing-anticorrosion-films-on-mild-steel(34a7b76f-8ba6-49a7-a1fa-d87f52dc230f).html.
Full textNelson, William Forrester. "An Investigation into the Use of Mussel Adhesive Proteins as Temporary Corrosion Inhibitors for HY80 Steel." University of Dayton / OhioLINK, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1417774059.
Full textBiswas, Avidipto. "CORROSION PROTECTION OF COPPER IN OILY MEDIA: MICROSCOPIC MECHANISMS." Case Western Reserve University School of Graduate Studies / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=case1364487333.
Full text