Relevant bibliographies by topics / Conversion technology

Academic literature on the topic 'Conversion technology'

Author: Grafiati
Published: 10 December 2022
Last updated: 28 January 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Conversion technology.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Conversion technology"

1

MIZUUCHI, KIMINORI. "Wavelength conversion technology." Review of Laser Engineering 21, no. 1 (1993): 110–12. http://dx.doi.org/10.2184/lsj.21.110.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

WATANABE, MASAYOSHI. "Wavelength conversion technology." Review of Laser Engineering 21, no. 1 (1993): 27–30. http://dx.doi.org/10.2184/lsj.21.27.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kearsley, Malcolm W. "Starch conversion technology." Food Chemistry 19, no. 4 (January 1986): 317–18. http://dx.doi.org/10.1016/0308-8146(86)90055-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ohta, Tokio. "Thermoelectric Energy Conversion Technology." IEEJ Transactions on Fundamentals and Materials 116, no. 3 (1996): 196–201. http://dx.doi.org/10.1541/ieejfms1990.116.3_196.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Matsubara, Kakuei. "Thermoelectric Energy Conversion Technology." IEEJ Transactions on Fundamentals and Materials 116, no. 3 (1996): 202–6. http://dx.doi.org/10.1541/ieejfms1990.116.3_202.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kajikawa, Takenobu. "Thremoelectric Energy Conversion Technology." IEEJ Transactions on Fundamentals and Materials 116, no. 3 (1996): 207–11. http://dx.doi.org/10.1541/ieejfms1990.116.3_207.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

SOKIĆ, MILORAD, STANA TODORČEVIĆ, ANA BOGUNOVIĆ, and SONJA ZDRAVKOVIĆ. "COAL CONVERSION TECHNOLOGY ASSESSMENT." Chemical Engineering Communications 113, no. 1 (March 1992): 103–15. http://dx.doi.org/10.1080/00986449208936006.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Yokota, Toshikazu. "Unidentified Energy Conversion Technology." Journal of the Society of Mechanical Engineers 95, no. 886 (1992): 821–24. http://dx.doi.org/10.1299/jsmemag.95.886_821.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

C., Wereko-Brobby. "Biomass conversion and technology." Fuel and Energy Abstracts 37, no. 3 (May 1996): 197. http://dx.doi.org/10.1016/0140-6701(96)88741-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Consiglio, John. "“Chesterton’s Conversion—a Centenary Conversation”." Chesterton Review 48, no. 3 (2022): 585. http://dx.doi.org/10.5840/chesterton2022483/4117.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Conversion technology"

1

de, Albuquerque Fragoso Danielle Munick. "Lignin conversion to fine chemicals." Thesis, University of Glasgow, 2018. http://theses.gla.ac.uk/30847/.

Full text
Abstract:
The large availability of Kraft lignin as an industrial by-product and its polyaromatic characteristic, is ideal to consider the potential for recycling it into fine chemicals. To depolymerise lignin, solvolysis and hydrogenolysis experiments were performed. This research considered whether the low yields of products (fine chemicals) were related to the low content of β-O-4 bonds or if it was also associated to the dissolution of lignin in the solvent solution employed in the reactions. The type of solvents chosen to check the dissolution effect were those with low cost and were more sustainable than traditional solvents. Water, ethanol, isopropanol (IPA) and acetone were used. The water mixtures were applied in the tests in various proportions (25:75, 50:50, 75:25 solvent/water v:v). Due to their ability to break C-C and C-O bonds in lignin model compounds [1][2], the efficiency of platinum and rhodium in these reactions supported on alumina was also studied. It was found that the non-catalysed (solvolysis) and catalysed reactions showed different selectivities but similar overall yields ~ 10 % wt of monomeric phenols. The difficulty in increasing yields was mainly associated with the highly condensed character of Kraft lignin and re-polymerisation issues. To achieve an understanding of Kraft lignin depolymerisation, isotopic labelling reactions were completed in the presence of deuterated solvents as well as deuterium gas. This gave information on how Kraft lignin depolymerises, the influence of solvent to products formation and the involvement of hydrogen in the rate determining steps in the reactions. These results have led to an initial mechanistic understanding on how this complex molecule may yield alky-phenolic compounds. It was revealed that the solvent was directly involved in the products’ formation and that they were not generated by simple thermolysis. In addition, the presence of catalysts and hydrogen influenced product formation. The compounds showed different kinetic isotopic values, suggesting that each of these molecules came from individual mechanisms, highlighting the complexity of their formation. This was a relevant study as most of lignin depolymerisation mechanistic insights are based on model compounds and not on lignin itself. It was of interest to this project to explore not only different catalysts and their relationship to lignin depolymerisation, but also different lignin types. A simple pre-treatment for lignin extraction using sawdust (from oak and birch wood) in a Parr autoclave reactor in the presence of hydrogen, solvent and high temperature was developed. The lignins obtained after the pre-treatment were named parr-lignin and successfully resulted in polyaromatic molecules with less condensed character compared to lignins from Soda or Kraft pulping. Reactions were carried out with these lignins and a sugar-cane lignin. 4 5 Different catalytic systems with these lignins were investigated and how depolymerisation was affected by the metal and support used. The catalysts involved in the reactions included platinum, rhodium, nickel and iron. Various supports such as alumina, zirconia and carbon were tested along with the metals described. It was found that the supports were not inert in these experiments presenting catalytic activity. Materials with low surface area (zirconium catalysts) gave a poor performance compared to the others. In addition, nickel, a non-noble metal, showed as good a catalytic effect in the depolymerisation of these lignins as Pt and Rh. The components in the system influenced the reactions to different extents, especially product distribution. The catalysts had different selectivities and the solvents were not only dissolving lignin but also influencing the results. GPC analysis was performed to give an overview of the condensed level of these lignins and degrees of depolymerisation compared to the original material. GC-MS enabled the identification and quantification of 18 monomeric compounds. The post reaction characterisation of selected alumina catalysts (Pt/Al2O3, Ni/Al2O3 and Al2O3) was performed using XRD, BET, CHN, TPO and Raman Analysis to study the nature of the carbonaceous layer deposited on these materials. The work showed that after reaction the catalysts turned black in colour and the carbon laydown consisted of not only one simple type of carbon, and included graphitic species. The amount of carbon deposited depended on the type of lignin. Oak and birch parr-lignins had the highest and lowest amount of carbon over the catalysts respectively. No obvious trend relating to the type of catalyst, lignin and solvent used to the carbon nature was identified. This work showed that lignins with less condensed nature were less susceptible to solvolysis and more to hydrogenolysis. For example, sugar-cane lignin gave 3.9% of phenolic compounds in the solvolysis while reaction with Rh/Al2O3 gave 12.9% of products. This indicated that more selective cleavage of bonds were promoted by heterogenous catalysts. The results suggested that some compounds were mainly generated via dealkylation and hydrodeoxygenation, allowing a future possibility to generate target molecules. These results were mainly due to the presence of more labile bonds, vulnerable to hydrogenolysis. Highlighting that prior to depolymerisation, the pre-treatment used to extract lignin must be appropriate to avoid depletion of the alkyl-aryl ether bonds (β-O-4 bonds, especially) relevant for fine chemicals generation.
APA, Harvard, Vancouver, ISO, and other styles
2

Grabbe, Mårten. "Marine Current Energy Conversion : Resource and Technology." Licentiate thesis, Uppsala University, Electricity, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-113365.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Grabbe, Mårten. "Hydro-Kinetic Energy Conversion : Resource and Technology." Doctoral thesis, Uppsala universitet, Elektricitetslära, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-195942.

Full text
Abstract:
The kinetic energy present in tidal currents and other water courses has long been appreciated as a vast resource of renewable energy. The work presented in this doctoral thesis is devoted to both the characteristics of the hydro-kinetic resource and the technology for energy conversion. An assessment of the tidal energy resource in Norwegian waters has been carried out based on available data in pilot books. More than 100 sites have been identified as interesting with a total estimated theoretical resource—i.e. the kinetic energy in the undisturbed flow—in the range of 17 TWh. A second study was performed to analyse the velocity distributions presented by tidal currents, regulated rivers and unregulated rivers. The focus is on the possible degree of utilization (or capacity factor), the fraction of converted energy and the ratio of maximum to rated velocity, all of which are believed to be important characteristics of the resource affecting the economic viability of a hydro-kinetic energy converter. The concept for hydro-kinetic energy conversion studied in this thesis comprises a vertical axis turbine coupled to a directly driven permanent magnet generator. One such cable wound laboratory generator has been constructed and an experimental setup for deployment in the river Dalälven has been finalized as part of this thesis work. It has been shown, through simulations and experiments, that the generator design at hand can meet the system requirements in the expected range of operation. Experience from winding the prototype generators suggests that improvements of the stator slot geometry can be implemented and, according to simulations, decrease the stator weight by 11% and decrease the load angle by 17%. The decrease in load angle opens the possibility to reduce the amount of permanent magnetic material in the design.
APA, Harvard, Vancouver, ISO, and other styles
4

Murray, Robert T. "Nonlinear wavelength conversion with optical fibre based technology." Thesis, Imperial College London, 2015. http://hdl.handle.net/10044/1/25624.

Full text
Abstract:
It is no exaggeration to state that the low-loss optical fibre has revolutionised the way in which we as a society lead our lives. The transfer and management of vast tracts of data generated minute by minute world over is only possible due to the development of the optical fibre and corresponding optical amplifiers, necessary for the implementation of telecommunications networks over large distances. Outside of the telecommunications sphere, the optical fibre has also made a huge impact on the laser market in the past three decades, due to the inherently robust nature and alignment-free operation of fibre based devices. Fibre lasers have now penetrated into the manufacturing market, and are finding increasing applications in numerous areas from medicine to defence. Typical fibre laser sources are constrained to operate in the emission bands of common rare-earth dopants, such as, ytterbium, erbium, or thulium. However, it is possible to extend the spectral coverage of standard fibre lasers through nonlinear conversion techniques. The temporal properties of pulsed laser sources, can be similarly manipulated, through the combined management of nonlinearity and dispersion. The work presented in this thesis is based upon these two themes of spectral and temporal diversity. Firstly, I will examine fibre-based parametric wavelength conversion, demonstrating fibre laser sources in the visible and near-visible spectral regions, suitable for bio-photonics imaging applications. Secondly, I will look at fibre-based nonlinear chirped pulse amplification, in particular, the design and implementation of a femtosecond μJ level source for future experiments in nonlinear optics. Both areas of research are tied together by the common thread of utilising new and emerging optical fibre based technology for nonlinear wavelength conversion.
APA, Harvard, Vancouver, ISO, and other styles
5

Abedini, Amin. "Piezoelectric Energy Harvesting via Frequency Up-conversion Technology." OpenSIUC, 2019. https://opensiuc.lib.siu.edu/dissertations/1716.

Full text
Abstract:
Ambient energy harvesting has attracted significant attention over the last years for applications such as wireless sensors, implantable devices, health monitoring systems, and wearable devices. The methods of vibration-to-electric energy conversion can be included in the following categories: electromagnetic, electrostatic, and piezoelectric. Among various techniques of vibration-based energy harvesting, piezoelectric transduction method has received the most attention due to the large power density of the piezoelectric material and its simple architectures. In contrast to electromagnetic energy harvesting, the output voltage of a piezoelectric energy harvester is high, which can charge a storage component such as a battery. Compared to electrostatic energy harvester, the piezoelectric energy harvester does not require an external voltage supply. Also, piezoelectric harvesters can be manufactured in micro-scale, where they show better performance compared to other energy harvesters, owing to the well-established thick-film and thin-film fabrication techniques. The main drawback of the linear piezoelectric harvesters is that they only retrieve energy efficiently when they are excited at their resonance frequencies, which are usually high, while they are less efficient when the excitation frequency is distributed over a broad spectrum or is dominant at low frequencies. High-frequency vibrations can be found in machinery and vehicles could be used as the energy source but, most of the vibration energy harvesters are targeting at low-frequency vibration sources which are more achievable in the natural environment. One way to overcome this limitation is by using the frequency-up-conversion technology via impacts, where the source of the impacts can be one or two stoppers or more massive beams. The impact makes the piezoelectric beam oscillate in its resonance frequency and brings nonlinear behavior into the system.
APA, Harvard, Vancouver, ISO, and other styles
6

Yuen, Katarina. "System Aspects of Marine Current Energy Conversion." Licentiate thesis, Uppsala University, Electricity, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-113339.

Full text
Abstract:

Free-flowing water currents such as tides and unregulated water courses could contribute to world electricity production given the emergence of robust technical solutions for extracting the energy. At Uppsala University, a concept for converting water currents to electricity using a vertical axis turbine with fixed blade pitch and a direct drive permanentmagnet generator is studied. A system approach is desired, and in this thesis, a first analysis of two system components, the generator and the turbine, is presented. This thesis also deals with some issues concerning the design and construction of a low speed generator for this application. An experimental generator for verification of simulations has been designed and constructed. For the electromagnetic design, a FEM simulation tool has been used. The construction work has given valuable practical experience concerning for example handling permanent magnets and winding the generator with cable. Simulations and measurements of the experimental generator have been carried out for different speeds and loads. The generator can operate at the speeds and loads corresponding to maximum power capture for different turbines for water current velocities between approximately 0.5 and 2.5 m/s. At higher water current velocities the turbines may need to be run at a tip speed ratio that gives a lower power capture in order to limit the electrical currents in the generator, cavitation of the blades, or mechanical loads. Comparisons of measurements and simulations show an agreement. The FEM simulation tool can be used to simulate and design electrical machines with a low electrical frequency, i.e. 2–16 Hz.

APA, Harvard, Vancouver, ISO, and other styles
7

Samarah, Imad M. "Collaboration technology support for knowledge conversion in virtual teams /." Available to subscribers only, 2006. http://proquest.umi.com/pqdweb?did=1240701241&sid=4&Fmt=2&clientId=1509&RQT=309&VName=PQD.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wilkinson, Stuart. "Barley derived spent grains : conversion to bioethanol." Thesis, University of Nottingham, 2016. http://eprints.nottingham.ac.uk/33865/.

Full text
Abstract:
Brewers spent grains (BSG) are an abundant co-product from the beer brewing industry. The current predominant use for BSG is as cattle feed. However, this is a low value use. As such, higher value uses for BSG are being sought. One such option is the production of bioethanol from the polysaccharides (cellulose and hemicellulose in the lignocellulosic matrix) found in BSG, and this thesis aimed to develop this process. This was achieved through investigating and attempting to optimise a range of different pre-treatments in order to enhance the subsequent cellulolytic enzyme saccharification yields to produce a high glucose concentration feedstock which could then be fermented to produce bioethanol. For the pre-treatment step of the process, a wide range of protocols were investigated and optimised (at high solids loading; ≥25% w/v). These included dilute acid and alkali hydrothermal, alkaline peroxide, caustic (NaOH) and microwave based autohydrolytical protocols which were all capable (under optimal conditions) of achieving close to 90% theoretical glucose yields when using an excess of cellulolytic enzyme. Optimisation of the enzymatic saccharification step was attempted and involved using a batch-fed protocol, with supplementary enzymes, and a high-torque mixing system were still only able to achieve ca. 43% theoretical glucose yields when operating at 15% w/v solids loading. Limited saccharification yields appear to be the rate limiting step for bioethanol production from BSG as it limited the concentration of glucose in the feedstocks produced. In addition, entirely biological routes to generate bioethanol were investigated using consolidated bioprocessing (CBP), which entailed using a consortium of fungal microorganisms. A primary filamentous fungal species was used as a cellulolytic enzyme factory whilst a yeast strain was used to ferment any liberated sugars to ethanol. From all of the fungal based CBP systems tested the traditional saké fermentation system (A.oryzae and S.cerevisiae NCYC479) was shown to achieve the highest ethanol yields (ca. 37 g/L within 10 days).
APA, Harvard, Vancouver, ISO, and other styles
9

Li, Xiangtao. "High-speed analog-to-digital conversion in SiGe HBT technology." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/24652.

Full text
Abstract:
Thesis (Ph.D.)--Electrical and Computer Engineering, Georgia Institute of Technology, 2008.
Committee Chair: Cressler, John D.; Committee Member: Laskar, Joy; Committee Member: Lee, Chin-Hui; Committee Member: Morley, Thomas; Committee Member: Papapolymerou, John
APA, Harvard, Vancouver, ISO, and other styles
10

Delgado, Guillermo Guadalupe. "Treatment of RO concentrate using VSEP technology." To access this resource online via ProQuest Dissertations and Theses @ UTEP, 2009. http://0-proquest.umi.com.lib.utep.edu/login?COPT=REJTPTU0YmImSU5UPTAmVkVSPTI=&clientId=2515.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Conversion technology"

1

B, Hagan Essel, ed. Biomass conversion and technology. Chichester: Wiley, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Coal combustion and conversion technology. New York: Elsevier, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wood, John. Conversion to open systems technology. London: University of East London, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Sathyajith, Mathew. Advances in Wind Energy Conversion Technology. Berlin, Heidelberg: Springer-Verlag Berlin Heidelberg, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sathyajith, Mathew, and Geeta Susan Philip, eds. Advances in Wind Energy Conversion Technology. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-540-88258-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Murray, Moo-Young, ed. Biomass conversion technology: Principles and practice. New York: Pergamon Press, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Desalination: Methods, costs and technology. Hauppauge, N.Y: Nova Science Publishers, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Office, General Accounting. Defense conversion. Washington, D.C: The Office, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Office, General Accounting. Defense conversion. Washington, D.C: The Office, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ota, Tokio. Energy technology: Sources, systems and frontier conversion. Oxford: Pergamon, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Conversion technology"

1

Gouklin, Evgueni. "Problems and Possibilities of Technology Transfer." In Conversion, 173–74. Berlin, Heidelberg: Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-642-95701-7_25.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Pelgrom, Marcel J. M. "Technology." In Analog-to-Digital Conversion, 369–412. Dordrecht: Springer Netherlands, 2010. http://dx.doi.org/10.1007/978-90-481-8888-8_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Pelgrom, Marcel J. M. "Technology." In Analog-to-Digital Conversion, 483–536. New York, NY: Springer New York, 2012. http://dx.doi.org/10.1007/978-1-4614-1371-4_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Wolff, Lodwijk Reiner, and Valerylvanovit Yarigin. "Thermionic Energy Conversion, Space Technology for Energy Conservation." In Conversion, 199–206. Berlin, Heidelberg: Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-642-95701-7_32.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bronicki, Lucien Y. "Geothermal Power Conversion Technology geothermal power conversion technology." In Encyclopedia of Sustainability Science and Technology, 4234–339. New York, NY: Springer New York, 2012. http://dx.doi.org/10.1007/978-1-4419-0851-3_233.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bronicki, Lucien Y. "Geothermal Power Conversion Technology geothermal power conversion technology." In Renewable Energy Systems, 818–923. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-5820-3_233.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Stubkjaer, K. E., B. Mikkelsen, C. Joergensen, S. L. Danielsen, M. Vaa, R. J. Pedersen, H. Povlsen, et al. "Wavelength Conversion Technology." In Photonic Networks, 103–17. London: Springer London, 1997. http://dx.doi.org/10.1007/978-1-4471-0979-2_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Messenger, Roger, D. Yogi Goswami, Hari M. Upadhyaya, Senthilarasu Sundaram, Aruna Ivaturi, Stephan Buecheler, and Ayodhya N. Tiwari. "Photovoltaics Fundamentals, Technology and Application." In Energy Conversion, 765–850. Second edition. | Boca Raton : CRC Press, 2017. | Series:: CRC Press, 2017. http://dx.doi.org/10.1201/9781315374192-20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ishida, Yohei, and Shinsuke Takagi. "Photoenergy Conversion." In Nanostructure Science and Technology, 357–71. Tokyo: Springer Japan, 2017. http://dx.doi.org/10.1007/978-4-431-56496-6_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Poljakov, Anatoli. "Main Directions of Radiochemical Technology Convertice at A.A. Bochvar Ausri of Inorganic Materials." In Conversion, 186–89. Berlin, Heidelberg: Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-642-95701-7_28.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Conversion technology"

1

Mandl, William J., and Richard Fedors. "Direct digital conversion detector technology." In SPIE's 1995 Symposium on OE/Aerospace Sensing and Dual Use Photonics, edited by Andrew R. Pirich. SPIE, 1995. http://dx.doi.org/10.1117/12.212710.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Salminen, Jukka, Seppo Eva, and Tom Ekegren. "Icebreaker OTSO Conversion." In Arctic Technology Conference. Offshore Technology Conference, 2016. http://dx.doi.org/10.4043/27459-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Agee, Mark A. "Taking GTL Conversion Offshore." In Offshore Technology Conference. Offshore Technology Conference, 1999. http://dx.doi.org/10.4043/10762-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Thompson, R. G., J. Napier, and C. Rodgers. "Conversion of T-100 MPSPU Technology." In ASME 1994 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1994. http://dx.doi.org/10.1115/94-gt-490.

Full text
Abstract:
Conversion of small tutbomachinery advanced technology from USA Department of Defense to commercial markets of opportunity is discussed in the light of recent development of the T-100 Multipurpose Small Power Unit (MPSPU) for the U.S. Army. For the power class from 50 SHP to 75 SHP (37 KW to 56 KW), the small T-100 MPSPU Gas Turbine represents a milestone in achieved simple-cycle non-heat-exchanged thermal efficiency. Application of this turbomachinery technology, and in combination with heat recovery to compact turboalternator systems, is a prime candidate for conversion from airborne/defense use only to defense/commercial and airborne/ground implementation. The T-100 MPSPU Test Program achievements are summarized in this paper. Also, preliminary design/off-design studies are presented for a turboalternator based on T-100 MPSPU components, and a scaled derivative that would achieve 60 KWe at modest turbine inlet temperature is presented. The turboalternator design objective is to provide a reliable compact source of electric power for military and commercial use in stationary, vehicular and aircraft applications that will run on most fuels, with low initial and operating costs, runs quietly, has low emissions and provides good to excellent specific fuel consumption.
APA, Harvard, Vancouver, ISO, and other styles
5

Yu, Zekun. "Cloud Computing-Conversion Technology for Interoperability." In 2012 4th International Conference on Multimedia Information Networking and Security (MINES). IEEE, 2012. http://dx.doi.org/10.1109/mines.2012.85.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Boeke, U. "High Efficiency Flyback Converter Technology." In 2007 Power Conversion Conference - Nagoya. IEEE, 2007. http://dx.doi.org/10.1109/pccon.2007.373128.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wyczalek, Floyd. "Magnetic levitation transit technology worldwide." In Intersociety Energy Conversion Engineering Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1994. http://dx.doi.org/10.2514/6.1994-3920.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wyczalek, Floyd. "Future battery electric vehicle technology." In Intersociety Energy Conversion Engineering Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1994. http://dx.doi.org/10.2514/6.1994-3921.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Woods, Andrew J., Tom Docherty, and Rolf Koch. "3D video standards conversion." In Electronic Imaging: Science & Technology, edited by Mark T. Bolas, Scott S. Fisher, and John O. Merritt. SPIE, 1996. http://dx.doi.org/10.1117/12.237439.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Basso, Thomas. "Photovoltaics - Technology providing global energy solutions." In Intersociety Energy Conversion Engineering Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1994. http://dx.doi.org/10.2514/6.1994-3859.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Conversion technology"

1

Back, L. H., G. Fabris, and M. A. Ryan. Direct Conversion Technology. Office of Scientific and Technical Information (OSTI), July 1992. http://dx.doi.org/10.2172/5027290.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Massier, P. F., L. H. Back, M. A. Ryan, and G. Fabris. Direct conversion technology. Office of Scientific and Technical Information (OSTI), January 1992. http://dx.doi.org/10.2172/5916746.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Massier, P. F., C. P. Bankston, R. Williams, M. Underwood, B. Jeffries-Nakamura, and G. Fabris. Direct conversion technology. Office of Scientific and Technical Information (OSTI), December 1989. http://dx.doi.org/10.2172/6912586.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Staunton, R. H. Microturbine Power Conversion Technology Review. Office of Scientific and Technical Information (OSTI), July 2003. http://dx.doi.org/10.2172/885881.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Rochau, Gary E. Advanced Reactor Technology/Energy Conversion Project FY17 Accomplishments. Office of Scientific and Technical Information (OSTI), February 2018. http://dx.doi.org/10.2172/1423535.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kukacka, L. E. Geothermal materials project input for conversion technology task. Office of Scientific and Technical Information (OSTI), August 1990. http://dx.doi.org/10.2172/6192875.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Massier, P. F., C. P. Bankston, G. Fabris, and L. D. Kirol. Direct conversion technology: Annual summary report CY 1988. Office of Scientific and Technical Information (OSTI), December 1988. http://dx.doi.org/10.2172/6625661.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Davis, Ryan, Mary J. Biddy, Eric Tan, Ling Tao, and Susanne B. Jones. Biological Conversion of Sugars to Hydrocarbons Technology Pathway. Office of Scientific and Technical Information (OSTI), March 2013. http://dx.doi.org/10.2172/1073586.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Davis, R., M. Biddy, E. Tan, L. Tao, and S. Jones. Biological Conversion of Sugars to Hydrocarbons Technology Pathway. Office of Scientific and Technical Information (OSTI), March 2013. http://dx.doi.org/10.2172/1076636.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kukacka, L. E. Geothermal materials project input for conversion technology task. Office of Scientific and Technical Information (OSTI), April 1991. http://dx.doi.org/10.2172/5781723.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Conversion technology' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography