Relevant bibliographies by topics / Control of modern power system

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Control of modern power system'

Author: Grafiati
Published: 6 September 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Control of modern power system.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Control of modern power system"

1

Alexandridis, Antonio T. "Modern Power System Dynamics, Stability and Control." Energies 13, no. 15 (July 24, 2020): 3814. http://dx.doi.org/10.3390/en13153814.

Full text
Abstract:
This Special Issue of Energies, “Modern Power System Dynamics, Stability and Control”, addresses the core problem of deploying novel aspects in the analysis of modern power systems as these are composed after the high penetration of distributed generation (DG) with different renewable energy sources (RES). The focus is given either on the new whole power and control system configuration or on individual cases of DG sources, power converters and other general or specific plants and devices. The problem can be tackled with different methodologies and may have several, more or less valuable and complicated solutions. The twenty-three accepted papers certainly offer a good contribution in a wide range of applications; they are extended from basic system theory perspectives, fundamental nonlinear analysis tools and novel modeling deployments to some interesting particular system and control issues.
APA, Harvard, Vancouver, ISO, and other styles
2

Sharma, Dushyant, and Sukumar Mishra. "Power system frequency stabiliser for modern power systems." IET Generation, Transmission & Distribution 12, no. 9 (May 15, 2018): 1961–69. http://dx.doi.org/10.1049/iet-gtd.2017.1295.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lutz, E., and J. Martinaud. "A Modern Data Base Management System in Power System Control." IFAC Proceedings Volumes 18, no. 7 (July 1985): 293–98. http://dx.doi.org/10.1016/s1474-6670(17)60448-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Shah, Syed Afzal. "Active Power Control In Modern Power System Through Demand Side Response." International Journal of Engineering Works 06, no. 12 (December 31, 2019): 521–24. http://dx.doi.org/10.34259/ijew.19.612521524.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Basit, Abdul, Tanvir Ahmad, Asfand Yar Ali, Kaleem Ullah, Gussan Mufti, and Anca Daniela Hansen. "Flexible Modern Power System: Real-Time Power Balancing through Load and Wind Power." Energies 12, no. 9 (May 6, 2019): 1710. http://dx.doi.org/10.3390/en12091710.

Full text
Abstract:
Increasing large-scale integration of renewables in conventional power system has led to an increase in reserve power requirement owing to the forecasting error. Innovative operating strategies are required for maintaining balance between load and generation in real time, while keeping the reserve power requirement at its minimum. This research work proposes a control strategy for active power balance control without compromising power system security, emphasizing the integration of wind power and flexible load in automatic generation control. Simulations were performed in DIgSILENT for forecasting the modern Danish power system with bulk wind power integration. A high wind day of year 2020 was selected for analysis when wind power plants were contributing 76.7% of the total electricity production. Conventional power plants and power exchange with interconnected power systems utilize an hour-ahead power regulation schedule, while real-time series are used for wind power plants and load demand. Analysis showed that flexible load units along with wind power plants can actively help in reducing real-time power imbalances introduced due to large-scale integration of wind power, thus increasing power system reliability without enhancing the reserve power requirement from conventional power plants.
APA, Harvard, Vancouver, ISO, and other styles
6

Chiflidzhanova-Hubenova, Zoya. "Modern aspects of the development of information and control system in energetics." Journal scientific and applied research 1, no. 1 (March 3, 2012): 58–66. http://dx.doi.org/10.46687/jsar.v1i1.18.

Full text
Abstract:
In the present paper the energy systems are analyzed as an example of the so called large artificial systems. An example of a multilevel system has been considered which is associated with the problem of dispatching active power within the energy system. The advantages of multilevel control as compared to a centralized approach are shown below. Construction process of the so called integrated production systems aims at providing functional, infor-mation, software, and technical compatibility as well as efficiency of the individual subsystems. In terms of control each information management system, distinguished by a hierarchical structure, consists of three main levels: lowest – field level, the second one – operational and dispatching, and the third level – information level networks.
APA, Harvard, Vancouver, ISO, and other styles
7

Bodenstein, Max, Ingo Liere-Netheler, Frank Schuldt, Karsten von Maydell, Alexander K. Hartmann, and Carsten Agert. "Optimized Power Flow Control to Minimize Congestion in a Modern Power System." Energies 16, no. 12 (June 8, 2023): 4594. http://dx.doi.org/10.3390/en16124594.

Full text
Abstract:
The growing integration of renewable energy sources (RES) into the power system causes congestion to occur more frequently. In order to reduce congestion in the short term and to make the utilization of the power system more efficient in the long term, power flow control (PFC) in the transmission system has been proposed. However, exemplary studies show that congestion will increase also in the distribution system if the transmission system is expanded. For this reason, the potential of PFC to reduce congestion in a model of a real 110 kV distribution system is investigated. Several Unified Power Flow Controller (UPFC) devices are optimized in terms of their number and placement in the power system, their size, control parameters, and costs, by using a Parallel Tempering approach as well as a greedy algorithm. Two optimization variants are considered, one reducing the number of degrees of freedom by integrating system knowledge while the other does not. It is found that near a critical grid state and disregarding costs, PFC can reduce congestion significantly (99.13%). When costs of the UPFCs are taken into account, PFC can reduce congestion by 73.2%. A basic economic analysis of the costs reveals that the usage of UPFCs is profitable. Furthermore, it is found that the reduction in the solution space of the optimization problem leads to better results faster and that, contrary to expectations, the optimization problem is simple to solve. The developed methods allow not only for the determination of the optimal use of UPFCs to minimize congestion, but also to estimate their profitability.
APA, Harvard, Vancouver, ISO, and other styles
8

Ullah, Kaleem, Abdul Basit, Zahid Ullah, Fahad R. Albogamy, and Ghulam Hafeez. "Automatic Generation Control in Modern Power Systems with Wind Power and Electric Vehicles." Energies 15, no. 5 (February 27, 2022): 1771. http://dx.doi.org/10.3390/en15051771.

Full text
Abstract:
The modern power system is characterized by the massive integration of renewables, especially wind power. The intermittent nature of wind poses serious concerns for the system operator owing to the inaccuracies in wind power forecasting. Forecasting errors require more balancing power for maintaining frequency within the nominal range. These services are now offered through conventional power plants that not only increase the operational cost but also adversely affect the environment. The modern power system emphasizes the massive penetration of wind power that will replace conventional power plants and thereby impact the provision of system services from conventional power plants. Therefore, there is an emergent need to find new control and balancing solutions, such as regulation reserves from wind power plants and electric vehicles, without trading off their natural behaviors. This work proposes real-time optimized dispatch strategies for automatic generation control (AGC) to utilize wind power and the storage capacity of electric vehicles for the active power balancing services of the grid. The proposed dispatch strategies enable the AGC to appropriately allocate the regulating reserves from wind power plants and electric vehicles, considering their operational constraints. Simulations are performed in DIgSILENT software by developing a power system AGC model integrating the generating units and an EVA model. The inputs for generating units are considered by selecting a particular day of the year 2020, when wind power plants are generating high power. Different coordinated dispatch strategies are proposed for the AGC model to incorporate the reserve power from wind power plants and EVs. The performance of the proposed dispatch strategies is accessed and discussed by obtaining responses of the generating units and EVs during the AGC operation to counter the initial power imbalances in the network. The results reveal that integration of wind power and electric vehicles alongside thermal power plants can effectively reduce real-time power imbalances acquainted in power systems due to massive penetration of wind power that subsequently improves the power system security. Moreover, the proposed dispatch strategy reduces the operational cost of the system by allowing the conventional power plant to operate at their lower limits and therefore utilizes minimum reserves for the active power balancing services.
APA, Harvard, Vancouver, ISO, and other styles
9

O A, Ezechukwu. "Application of Comparators in Modern Power System Protection and Control." IOSR Journal of Electrical and Electronics Engineering 8, no. 3 (2013): 58–63. http://dx.doi.org/10.9790/1676-0835863.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ullah, Kaleem, Abdul Basit, Zahid Ullah, Sheraz Aslam, and Herodotos Herodotou. "Automatic Generation Control Strategies in Conventional and Modern Power Systems: A Comprehensive Overview." Energies 14, no. 9 (April 22, 2021): 2376. http://dx.doi.org/10.3390/en14092376.

Full text
Abstract:
Automatic generation control (AGC) is primarily responsible for ensuring the smooth and efficient operation of an electric power system. The main goal of AGC is to keep the operating frequency under prescribed limits and maintain the interchange power at the intended level. Therefore, an AGC system must be supplemented with modern and intelligent control techniques to provide adequate power supply. This paper provides a comprehensive overview of various AGC models in diverse configurations of the power system. Initially, the history of power system AGC models is explored and the basic operation of AGC in a multi-area interconnected power system is presented. An in-depth analysis of various control methods used to mitigate the AGC issues is provided. Application of fast-acting energy storage devices, high voltage direct current (HVDC) interconnections, and flexible AC transmission systems (FACTS) devices in the AGC systems are investigated. Furthermore, AGC systems employed in different renewable energy generation systems are overviewed and are summarized in tabulated form. AGC techniques in different configurations of microgrid and smart grid are also presented in detail. A thorough overview of various AGC issues in a deregulated power system is provided by considering the different contract scenarios. Moreover, AGC systems with an additional objective of economic dispatch is investigated and an overview of worldwide AGC practices is provided. Finally, the paper concludes with an emphasis on the prospective study in the field of AGC.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Control of modern power system"

1

Hernandez, Michael. "Applications of modern control in power electronics." Paris 11, 2010. http://www.theses.fr/2010PA112161.

Full text
Abstract:
Dans la première partie, cette dissertation continue le cadre pour l'analyse et la conception (probablement des compensateurs de facteur) de puissance (PF) non linéaire pour les systèmes électriques fonctionnant dans des régimes nonsinusoïdaux (mais périodiques) avec les charges non linéaires. En particulier, dans la prétention standard que le générateur est une source de tension sans l'impédance, nous avons caractérisé toutes les charges non linéaires dont le pf est amélioré avec un compensateur non linéaire indiqué. Et ce cadre est employé pour étudier le problème de lacompensation passive de pf d'un redresseur commandé par pont classique. Est donné le fonctionnement "à l'avance de phase" du redresseur qu'on s'attend à ce que la compensation capacitive améliore le pf. Il est cependant moins évident que ceci puisse également être réalisé (dans quelques conditions appropriées) avec des inducteurs. Dans la deuxième partie, on a proposé la méthodologie d’A pour concevoir les contrôleurs (PI) proportionnel-intégraux linéaires utilisés des applications de convertisseur de puissance et en assurant la stabilité asymptotique. La technique s’est fondée sur le fait de base que si un système d’affinage peut être rendu passif avec une commande constante, alors il est stabilisable avec pi. Un état structural a été imposé alors au convertisseur de puissance pour satisfaire l’ancienne propriété avec un résultat passif produit comme combinaison linéaire des états. Cette condition est technique et n’a aucune interprétation physique claire. Ce résultat est prolongé dans trois directions : d’abord, la condition mentionnée ci-dessus est enlevée ; en second lieu, une plus grande classe des convertisseurs (avec des sources extérieures de commutation) est considérée ; troisièmement, la résistance de charge est assumée qu’on propose l’inconnu et un contrôleur adaptatif de pi (avec trois estimateurs différents). La méthodologie est appliquée au problème de la compensation de facteur de puissance d’un redresseur triphasé de source de tension, avec des résultats de simulation proposés. En outre, pi adaptatif stable est conçu pour la régulation de tension de rendement d’un convertisseur quadratique de poussée montrant l’exécution au moyen de résultat expérimental. Dans la troisième partie quelques contrôleurs basés sur le concept de la commande de charge pour un convertisseur utilisé dans une mise sous tension la correction de facteur sont montrés. Le convertisseur se compose par le raccordement intercalé de deux convertisseurs ou plus de poussée reliée à la grille à l’aide d’un redresseur de diode non commandé. La commande de charge représente une solution bon marché pour garantir la mise en commun courante entre les différents convertisseurs impliqués, et est normalement employée en combination avec d’autres contrôleurs. Les deux contrôleurs sont d’abord conçus pour garantir le facteur de puissance de près d’un avec la tension CC Réglée, à laquelle la commande de charge est ajoutée pour distribuer le courant égal parmi les convertisseurs. En conclusion, on présente une simplification avec l’exécution semblable qui élimine l’utilisation des sondes courantes, excepté les transformateurs de courant exigés pour mettre en application la commande de charge, des résultats expérimentaux accomplissent cette cloison. La quatrième partie, présente l’exécution et la programmation d’une méthode pour dépister le point de puissance maximum (MPP) dans des applications (PV) photovoltaïques. Ce point de fonctionnement est d’intérêt spécial pendant qu’on l’exige pour extraire la puissance maximum disponible à partir des rangées photovoltaïques
In the first part, this dissertation continues with the framework for analysis and design of (possibly nonlinear) power factor (PF) compensators for electrical systems operating in non-sinusoidal (but periodic) regimes with nonlinear loads. In particular, under the standard assumption that the generator is a voltage source with no impedance, we characterized all nonlinear loads whose PF is improved with a given nonlinear compensator. And this framework is used to study the problem of passive PF compensation of a classical half-bridge controlled rectifier. Given the “phase advance” operation of the rectifier it is expected that capacitive compensation improves PF, it is however less obvious that this can also be achieved (under some suitable conditions) with inductors. In the second part, A methodology to design linear proportional-integral (PI) controllers used in power converter applications and ensuring asymptotic stability was proposed. The technique relied on the basic fact that if an affine system can be rendered passive with a constant control, then it is stabilizable with a PL A structural condition was imposed then on the power converter to satisfy the former property with a passive output generated as a linear combination of the states. This condition is technical and has no clear physical interpretation. This result is extended in three directions : first, the aforementioned condition is removed ; second, a larger class of converters (with switching external sources) is considered ; third, the load resistance is assumed unknown and an adaptive PI controller (with three different estimators) is proposed. The methodology is applied to the problem of power factor compensation of a 3-phase. Voltage source rectifier, with simulation results proposed. Also, a stable adaptive PI is designed for the output voltage regulation of a quadratic boost converter showing the performance by means of experimental result. In the third part some controllers based on the concept of charge control for a converter used in an application of power factor correction are shown. The converter is composed by the interleaved connection of two or more boost converters connected to the grid by means of a non controlled diode rectifier. Charge control represents a cheap solution to guarantee current sharing among the different converters involved, and is normally used in combination with other controllers. The two controllers are first designed to guarantee the power factor close to one with regulated DC voltage, to which charge control is added to distribute equal current among the converters. Finally, a simplification with similar performance is presented that eliminates the use of current sensors, except for the current transformers required to implement the charge control, experimental results complete this part. The fourth part presents the implementation and programming of a method to track the maximum power point (MPP) in photovoltaic (PV) applications. This operation point is of special interest as it is required to extract the maximum power available from the photovoltaic arrays
APA, Harvard, Vancouver, ISO, and other styles
2

Dong, Zhao Yang. "Advanced methods for small signal stability analysis and control in modern power systems." Phd thesis, School of Electrical and Information Engineering, Graduate School of Engineering, 1998. http://hdl.handle.net/2123/6416.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Anderson, Sharon Lee. "Reduced order power system models for transient stability studies." Thesis, This resource online, 1993. http://scholar.lib.vt.edu/theses/available/etd-09052009-040743/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Barik, Tapas Kumar. "Modern Adaptive Protection and Control Techniques for Enhancing Distribution Grid Resiliency." Diss., Virginia Tech, 2021. http://hdl.handle.net/10919/103644.

Full text
Abstract:
Power distribution systems have underwent a lot of significant changes in the last two decades. Wide-scale integration of Distributed Energy Resources (DERs) have made the distribution grid more resilient to abnormal conditions and severe weather induced outages. These DERs enhance the reliability of the system to bounce back from an abnormal situation rather quickly. However, the conventional notion of a radial system with unidirectional power flow does not hold true due to the addition of these DERs. Bidirectional power flow has challenged the conventional protection schemes in place. The most notable effects on the protection schemes can be seen in the field of islanding or Loss of Mains(LOM) detection and general fault identification and isolation. Adaptive protection schemes are needed to properly resolve these issues. Although, previous works in this field have dealt with this situation, a more comprehensive approach needs to be taken considering multiple topologies for developing adaptive protection schemes. The most common protective devices widely deployed in the distribution system such as overcurrent relays, reverse power relays at Point of Common Coupling(PCC), fuses, reclosers and feeder breakers need to studied in implementing these schemes. The work presented in this dissertation deals with simulation based and analytical approaches to tackle the issues of islanding and adaptive protection schemes. First we propose a multiprinciple passive islanding detection technique which relies on local PCC measurements, thus reducing the need of additional infrastructure and still ensuring limited Non Detection Zone (NDZ). The next step to islanding detection would be to sustain a islanded distribution system in order to reduce the restoration time and still supply power to critical loads. Such an approach to maintain generator load balance upon islanding detection is studied next by appropriate shedding of non-critical and low priority critical loads based upon voltage sensitivity analysis. Thereafter, adaptive protection schemes considering limited communication dependency is studied with properly assigning relay settings in directional overcurrent relays (DOCRs), which are one of the most widely deployed protective devices in distribution systems by catering to multiple topologies and contingencies. A simulation based technique is discussed first and then an analytical approach to solve the conventional optimal relay coordination problem using Mixed Integer Linear Programming (MILP) with the usage of multiple setting groups is studied. All these approaches make the distribution more robust and resilient to system faults and ensure proper fault identification and isolation, ensuring overall safety of system.
Doctor of Philosophy
With widespread integration of inverter-based distributed energy resources (DERs) in the distribution grid, the conventional protection and control schemes no longer hold valid. The necessity of an adaptive protection scheme increases as the DER penetration in the system increases. Apart from this, changes in system topology and variability in DER generation, also change the fault current availability in the system in real-time. Hence, the protection schemes should be able to adapt to these variations and modify their settings for proper selectivity and sensitivity towards faults in the system, especially in systems with high penetration of DERs. These protection schemes need to be modified in order to properly identify and isolate faults in the network as well as correctly identify Loss of Mains (LOM) or islanding phenomenon. Special attention is needed to plan the next course of action after the islanding occurrence. Additionally, the protective devices in distribution system should be utilized to their maximum capability to create an adaptive and smart protection system. This document elaborately explains the research work pertaining to these areas.
APA, Harvard, Vancouver, ISO, and other styles
5

Pourbeik, Pouyan. "Design and coordination of stabilisers for generators and FACTS devices in multimachine power systems /." Title page, contents and abstract only, 1997. http://web4.library.adelaide.edu.au/theses/09PH/09php877.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

RINALDI, GIANMARIO. "Local and Wide-Area Sliding Mode State Observation, Fault Reconstruction and Control with Application to Modern Power Systems." Doctoral thesis, Università degli studi di Pavia, 2020. http://hdl.handle.net/11571/1326211.

Full text
Abstract:
The present thesis summarises the research activity carried our by the PhD candidate Gianmario Rinaldi from October 2016 to September 2019 at the Department of Electrical, Computer and Biomedical Engineering at the University of Pavia, Italy. In recent years, radical changes are taking place to power systems. A worldwide consensus has been reached for the reduction of greenhouse effects, by promoting the growth of renewable energy sources in power grids. Therefore, a special shared interest has been raised amongst researchers and practitioners to turn the existing power grids into smarter and more reliable ones, which are able to safely, efficiently, an reliably integrate the growing renewable energy sources. Supervisory Control And Data Acquisition (SCADA) has been the conventional control and state estimation methodology practically used in the last few decades. Recent progress in computer science and electronic technologies has opened the door to the implementation of the so-called Wide Area Measurement Systems (WAMS). In particular, with a widespread deployment of Phasor Measurement Units (PMUs), a more accurate depiction of the state in power systems has become achievable in practice. Latest advances in computer science and electronic technologies have laid the groundwork for the conception of the so-called cyber-attacks, which can be defined as computer-based algorithms capable of destabilising the power network by compromising the collected measurements to be sent to a control centre, attack the communication networks, or alter and delay the control variables. In order to turn the existing power system into a smarter one capable of both harmoniously integrating renewable power sources and efficiently and safely dealing with faults and cyber-attacks, the attention is now focused on the following relevant research areas: The design and assessment of more accurate, robust and dynamic state estimators in power systems, which are able to obtain a near-real time depiction of all the state variables, instrumental in enhancing the monitoring of the networks. The implementation of timely fault detection, reconstruction and mitigation methodologies, devoted to preserve the stability of the entire power network, thus preventing wide-spread outages, blackouts, and degradations of the power quality. The design of identification schemes to determine key-properties of the components in power system context. The design and assessment of novel control approaches devoted to both regulate the frequency deviations and minimise the cost of the power generation. These control schemes are also required to be robust to possible faults, disturbances, and uncertainties affecting the power systems. The present thesis aims to fit into the aforementioned promising research areas in power systems. In particular, four challenges are addressed: The first addressed challenge considers the design of robust state estimators which are able to depict in near real time the state of the overall power systems to globally enhance the monitoring of the power systems, thus reducing the number of the deployed sensors. The undertaken analysis started at the local level and then consider the power system as a large-scale system. The second addressed challenge focuses on the design of fault detection, reconstruction, and mitigation approaches devoted to enhance the resilience of the power network. The third addressed challenge considers the design and the assessment of robust sliding mode observer-based controllers which are capable of regulating the frequencies in power systems whilst minimising the cost associated with the generators. Finally, the fourth addressed challenges examines the identification of the relative degree properties with application to electrical and power systems frameworks. Furthermore, the outline of the present thesis is coherent with the development of the contributions illustrated above.
APA, Harvard, Vancouver, ISO, and other styles
7

Du, Zhaobin, and 杜兆斌. "Area COI-based slow frequency dynamics modeling, analysis and emergency control for interconnected power systems." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2008. http://hub.hku.hk/bib/B4175783X.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Золотова, Світлана Григорівна, Светлана Григорьевна Золотова, Svitlana Hryhorivna Zolotova, and L. Skubak. "System control in modern technology." Thesis, Видавництво СумДУ, 2008. http://essuir.sumdu.edu.ua/handle/123456789/16031.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Manansala, Edgardo Celestino. "Adaptive power system control." Diss., Virginia Polytechnic Institute and State University, 1989. http://hdl.handle.net/10919/54391.

Full text
Abstract:
This work presents a centralized control scheme applied to a power system. The scheme has adaptive characteristics which allow the controller to keep track of the changing power system operating point and to control nonlinear functions of state variables. Feedback to the controller is obtained from phasor measurements at chosen power system buses, generator field voltage measurements, and state estimators. Control effort is aimed at minimizing the oscillations and influencing the power system state trajectory through the control of linear and nonlinear functions of state variables during a power system disturbance. The main contributions of this dissertation are the simultaneous introduction and utilization of measurement based terms in the state and output equations in the derivation and implementation of the control law, the study of limits on controller performance as the state residual vector becomes very large, and the simulation of the performance of local state estimators to prove the need for faster phasor measurement systems. The test system is a hypothetical 39-Bus AC power system consisting of typical components which have been sufficiently modelled for the simulation of power system performance in a dynamic stability study.
Ph. D.
APA, Harvard, Vancouver, ISO, and other styles
10

Hecker, Rogelio Lorenzo. "Power feedback control in cylindrical grinding process." Thesis, Georgia Institute of Technology, 2000. http://hdl.handle.net/1853/16619.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Control of modern power system"

1

Singh, Arun Kumar, and Manoj Tripathy, eds. Control Applications in Modern Power System. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-15-8815-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Modern power system control and operation. Boston: Kluwer Academic Publishers, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Crivat, Savulescu Savu, ed. Real-time stability assessment in modern power system control centers. Hoboken, N.J: John Wiley & Sons, Inc., 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kumar, Jitendra, Manoj Tripathy, and Premalata Jena, eds. Control Applications in Modern Power Systems. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-0193-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Debs, Atif S. Modern Power Systems Control and Operation. Boston, MA: Springer US, 1988. http://dx.doi.org/10.1007/978-1-4613-1073-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Mariani, E., and S. S. Murthy. Control of Modern Integrated Power Systems. London: Springer London, 1997. http://dx.doi.org/10.1007/978-1-4471-0993-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Debs, A. S. Modern power systems control and operation. Boston: Kluwer Academic Publishers, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kumar, Jitendra, Manoj Tripathy, and Premalata Jena, eds. Control Applications in Modern Power Systems. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-7788-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

E, Mariani. Control of modern integrated power systems. London: Springer, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Debs, Atif S. Modern Power Systems Control and Operation. Boston, MA: Springer US, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Control of modern power system"

1

Mariani, E., and S. S. Murthy. "System Control." In Control of Modern Integrated Power Systems, 57–121. London: Springer London, 1997. http://dx.doi.org/10.1007/978-1-4471-0993-8_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mariani, E., and S. S. Murthy. "Computer System for Power System Operation and Control." In Control of Modern Integrated Power Systems, 1–55. London: Springer London, 1997. http://dx.doi.org/10.1007/978-1-4471-0993-8_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Sen, Himanshu Narendra, Ashish Srivastava, Mucha Vijay Reddy, and Varsha Singh. "IoT-Integrated Voltage Monitoring System." In Control Applications in Modern Power System, 177–86. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-8815-0_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Mohammadi, Ali, Farnaz Safdarian, Mahdi Mehrtash, and Amin Kargarian. "A System of Systems Engineering Framework for Modern Power System Operation." In Studies in Systems, Decision and Control, 217–47. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-98923-5_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mariani, E., and S. S. Murthy. "System Security and Quality of Operation." In Control of Modern Integrated Power Systems, 161–77. London: Springer London, 1997. http://dx.doi.org/10.1007/978-1-4471-0993-8_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Pancholi, Roopal, and Sunita Chahar. "Enhancement of Hybrid PV-Wind System by Ingenious Neural Network Technique Indeed Noble DVR System." In Control Applications in Modern Power System, 279–310. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-8815-0_25.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Sharma, Akanksha, Geeta Kumari, H. P. Singh, R. K. Viral, S. K. Sinha, and Naqui Anwer. "Design of Energy Management System for Hybrid Power Sources." In Control Applications in Modern Power System, 197–215. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-8815-0_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kumar, Abhishek, Durgesh Chandra Nautiyal, and Prakash Dwivedi. "Closed Loop Control of Non-ideal Buck Converter with Type-III Compensator." In Control Applications in Modern Power System, 1–13. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-8815-0_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Yadav, Arvind R., Jayendra Kumar, Roshan Kumar, Shivam Kumar, Priyanshi Singh, and Rishabh Soni. "Real-Time Electric Vehicle Collision Avoidance System Under Foggy Environment Using Raspberry Pi Controller and Image Processing Algorithm." In Control Applications in Modern Power System, 111–18. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-8815-0_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Sahu, Preeti Ranjan, Rajesh Kumar Lenka, and Satyajit Panigrahy. "Modified Sine Cosine Algorithm Optimized Fractional-Order PD Type SSSC Controller Design." In Control Applications in Modern Power System, 119–30. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-8815-0_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Control of modern power system"

1

Ritonja, Jozef. "Modern power system stabilizer approaches." In 2015 27th Chinese Control and Decision Conference (CCDC). IEEE, 2015. http://dx.doi.org/10.1109/ccdc.2015.7162311.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Iliescu, S. St, and Ioana Fagarasan. "Modern approaches in power system control." In 2008 IEEE International Conference on Automation, Quality and Testing, Robotics. IEEE, 2008. http://dx.doi.org/10.1109/aqtr.2008.4588702.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

HUSEYNOV, ASAF M., and ORKHAN B. AZADKHANOV. "Development of intellectual information-measuring system for Azerbaijan power system regime reliability control." In 2019 Modern Electric Power Systems (MEPS). IEEE, 2019. http://dx.doi.org/10.1109/meps46793.2019.9394977.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Tchorzewski, Jerzy, and Radoslaw Marlega. "Metaidentification of the Modern Polish Power Exchange Control System." In 2019 Modern Electric Power Systems (MEPS). IEEE, 2019. http://dx.doi.org/10.1109/meps46793.2019.9394972.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Štefane, Matevž, and Darko Lovrec. "Modern control system for servo hydraulic linear drive." In International conference Fluid Power 2017. University of Maribor Press, 2017. http://dx.doi.org/10.18690/978-961-286-086-8.8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Gaffney, Brian D. "Development of Modern Electronic Control Systems for Power Distribution." In 2002 International Joint Power Generation Conference. ASMEDC, 2002. http://dx.doi.org/10.1115/ijpgc2002-26004.

Full text
Abstract:
The power industry is increasingly affected by several trends, which require improvements in the distributed generation and control systems of on-site power. These trends include the ability to share load across generators more effectively, seamless sequencing of generators, and the ability to monitor and control power that is being produced. Electronic control systems can provide these advantages in a cost effective solution. The application of electronic controls to a power distribution system requires a thorough development program. It is imperative to assure that the controls will provide reliable, long-term performance, as well as meeting the plant’s current and future needs for power distribution. This paper describes the development and field evaluation required to apply electronic controls to existing switchgear and power distribution systems in the power generation industry. The microprocessor based electronic control system for today’s power plants replaces out-dated analog equipment and antiquated relay logic. The new systems incorporate three main functions: Paralleling generators, monitoring power requirements, and effective sequencing of generators in power plants. Integration of these functions into the microprocessor based control system provides increased reliability, reduced cost, and enhanced performance, while concurrently providing increased flexibility in the operation of the plant. Additional benefits can be realized including reduced operator requirements, reduced training costs, and reduced burden on instrumentation electricians. A primary focus of this paper is the process used to qualify the control system needed for specific types of existing distributed power systems. This process consists of current system evaluation and categorization, establishment of classification of plant (utility, merchant plant, peak shaving facility, IPP), and determining the future needs of individual plants for power distribution. Local regulatory and utility protection and interconnect requirements must also be assessed to assure that the new control system meets or exceeds them. Methods of accurately monitoring, improving performance, and providing generator sequencing are defined, including accounting for improvements in the long-term expansion of the distributed power control and monitoring system.
APA, Harvard, Vancouver, ISO, and other styles
7

Rassudov, Lev, Alecksey Anuchin, Fernando Briz, and Igor Gulyaev. "System on Chip in modern motion control systems." In 2015 56th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON). IEEE, 2015. http://dx.doi.org/10.1109/rtucon.2015.7343159.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kumari, C. H. Nagaraja, and K. Chandra Sekhar. "Power flow control using FACTS device in modern power system." In 2017 IEEE International Conference on Circuits and Systems (ICCS). IEEE, 2017. http://dx.doi.org/10.1109/iccs1.2017.8326024.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Malinin, Grigoriy, and S. Yankevich. "LOGIC AUTOMATIC DRIVER CONTROL IN THE SYSTEM OF CONTROL OF POWERFUL POWER CONVERTERS." In CAD/EDA/SIMULATION IN MODERN ELECTRONICS 2019. Bryansk State Technical University, 2019. http://dx.doi.org/10.30987/conferencearticle_5e02821252ea43.36490574.

Full text
Abstract:
The paper presents an analysis of possible emergency conditions in a voltage converter controlled from an FPGA or a microcontroller and a method for eliminating them using a logical machine. The principle of operation of the machine is explained using a model assembled in CAD Xilinx ISE Design Suite.
APA, Harvard, Vancouver, ISO, and other styles
10

Darab, Cosmin, and Antoniu Turcu. "Internal model control for MPPT of a solar PV system." In 2017 International Conference on Modern Power Systems (MPS). IEEE, 2017. http://dx.doi.org/10.1109/mps.2017.7974464.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Control of modern power system"

1

Author, Not Given. Integrated control of next generation power system. Office of Scientific and Technical Information (OSTI), February 2010. http://dx.doi.org/10.2172/1025118.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Yang, Yu, and Hen-Geul Yeh. Electrical Vehicle Charging Infrastructure Design and Operations. Mineta Transportation Institute, July 2023. http://dx.doi.org/10.31979/mti.2023.2240.

Full text
Abstract:
California aims to achieve five million zero-emission vehicles (ZEVs) on the road by 2030 and 250,000 electrical vehicle (EV) charging stations by 2025. To reduce barriers in this process, the research team developed a simulation-based system for EV charging infrastructure design and operations. The increasing power demand due to the growing EV market requires advanced charging infrastructures and operating strategies. This study will deliver two modules in charging station design and operations, including a vehicle charging schedule and an infrastructure planning module for the solar-powered charging station. The objectives are to increase customers’ satisfaction, reduce the power grid burden, and maximize the profitability of charging stations using state-of-the-art global optimization techniques, machine-learning-based solar power prediction, and model predictive control (MPC). The proposed research has broad societal impacts and significant intellectual merits. First, it meets the demand for green transportation by increasing the number of EV users and reducing the transportation sector’s impacts on climate change. Second, an optimal scheduling tool enables fast charging of EVs and thus improves the mobility of passengers. Third, the designed planning tools enable an optimal design of charging stations equipped with a solar panel and battery energy storage system (BESS) to benefit nationwide transportation system development.
APA, Harvard, Vancouver, ISO, and other styles
3

Mathur, A., and C. Koch. Solar central receiver power plant control system concept. Office of Scientific and Technical Information (OSTI), July 1988. http://dx.doi.org/10.2172/6914107.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Little, Charles, and David Biedenharn. Technical assessment of the Old, Mississippi, Atchafalaya, and Red (OMAR) Rivers : channel geometry analysis. Engineer Research and Development Center (U.S.), August 2022. http://dx.doi.org/10.21079/11681/45147.

Full text
Abstract:
The Old River Control Complex (ORCC) consists of the Low Sill, Auxiliary, and Overbank structures as features of the Old River Control Structure (ORCS) and the privately owned hydro-electric power plant. Operations of the ORCC manage the hydrologic connectivity between the Mississippi River and the Atchafalaya River/Red River systems. The morphology of the Old, the Mississippi, the Atchafalaya, and the Red Rivers (OMAR) has been influenced by the flow distribution at the ORCC, as well as the accompanying bed sediments. A geomorphic assessment of the OMAR is underway to understand the morphological changes associated with operation of the ORCC. Supporting the geomorphic assessment, a channel geometry analysis herein documents observed adjustments of the affected river channels. Historical hydrographic survey data were used in the Geographic Information System to create river channel geometric models, which inform the analysis. Geometric parameters for cross sections and volume polygons were computed for each survey and evaluated for morphological trends which may be ascribed to the influence of the ORCC. Additionally, the geometric parameters for the Atchafalaya River were used to extend the geometry analyses from the 1951 Mississippi River Commission report on the Atchafalaya River, which was the primary catalyst for the initial development of the ORCS.
APA, Harvard, Vancouver, ISO, and other styles
5

Dagle, J. E., D. W. Winiarski, and M. K. Donnelly. End-use load control for power system dynamic stability enhancement. Office of Scientific and Technical Information (OSTI), February 1997. http://dx.doi.org/10.2172/484515.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kirby, B. J. Frequency Control Concerns in the North American Electric Power System. Office of Scientific and Technical Information (OSTI), March 2003. http://dx.doi.org/10.2172/885842.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Unknown. INTEGRATED SYSTEM TO CONTROL PRIMARY PM 2.5 FROM ELECTRIC POWER PLANTS. Office of Scientific and Technical Information (OSTI), June 2001. http://dx.doi.org/10.2172/785168.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Unknown. INTEGRATED SYSTEM TO CONTROL PRIMARY PM 2.5 FROM ELECTRIC POWER PLANTS. Office of Scientific and Technical Information (OSTI), January 2001. http://dx.doi.org/10.2172/788930.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Unknown. INTEGRATED SYSTEM TO CONTROL PRIMARY PM 2.5 FROM ELECTRIC POWER PLANTS. Office of Scientific and Technical Information (OSTI), October 2000. http://dx.doi.org/10.2172/789054.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Unknown. INTEGRATED SYSTEM TO CONTROL PRIMARY PM 2.5 FROM ELECTRIC POWER PLANTS. Office of Scientific and Technical Information (OSTI), December 2001. http://dx.doi.org/10.2172/791497.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Control of modern power system' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography