Books on the topic 'Continuous casting'

K, Ehrke, and Schneider W, eds. Continuous casting. Weinheim: Wiley-VCH, 2000.

Irving, W. R. Continuous casting of steel. London: Institute of Materials, 1993.

Müller, H. R., ed. Continuous Casting. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2005. http://dx.doi.org/10.1002/9783527607969.

International, Conference Continuous Casting (4th 1988 Brussels Belgium). 4th International Conference Continuous Casting: Preprints. Düsseldorf: Stahleisen, 1988.

International Symposium on the Continuous Casting of Steel Billets (1985 Vancouver, B.C.). Proceedings International Symposium on the Continuous Casting of Steel Billets: A symposium sponsored by the Basic Sciences Section of the Metallurgical Society of CIM : 24th Annual Conference of Metallurgists, August 18-21, 1985, Vancouver, British Columbia, Canada. [Montreal]: Metallurgical Society of CIM, Canadian Institute of Mining and Metallurgy, 1985.

Patrick, B. Continuous casting plant engineering control. Luxembourg: Commission of the European Communities, 1987.

Mirsalimov, V. M. Napri͡a︡zhennoe sostoi͡a︡nie i kachestvo nepreryvnogo slitka. Moskva: "Metallurgii͡a︡", 1990.

Billany, T. J. H. Mould flux performance during continuous casting. Luxembourg: Commission of the European Communities, 1989.

Brussels), ICC (4th 1988. Continuous casting: Proceedings of the 4th International Conference Continuous Casting, Brussels, May 17 - 19, 1988 : preprints. Edited by Centre de Recherches M'etallurgiques (CRM). and Verein Deutscher Eisenh"uttenleute (VDEh). D"usseldorf: Stahleisen, 1988.

Brussels), ICC (4th 1988. Continuous casting: Proceedings of the 4th International Conference Continuous Casting, Brussels, May 17 - 19, 1988 : preprints. Edited by Centre de Recherches M'etallurgiques (CRM). and Verein Deutscher Eisenh"uttenleute (VDEh). D"usseldorf: Stahleisen, 1988.

Sobolev, V. V. Teplofizika zatverdevanii͡a︡ metalla pri nepreryvnom litʹe. Moskva: "Metallurgii͡a︡", 1988.

Elsawy, Abdel Raouf. Net shape continuous casting of cored rods. Ottawa: National Library of Canada = Bibliothèque nationale du Canada, 1999.

Wilson, F. G. Study of nozzle blockage in continuous casting. Luxembourg: Commission of the European Communities, 1988.

Process Technology Conference (13th 1995 Nashville, TN). 13th Process Technology Conference proceedings: Continuous casting. Warrendale, Pa: Iron and Steel Society, 1995.

Gray, R. J. Behaviour of mould fluxes during continuous casting. Luxembourg: Commission of the EuropeanCommunities, 1985.

George, Harry, and Iron and Steel Society, eds. The Shrouding of steel flow for casting and teeming. Warrendale, PA: Iron and Steel Society, 1986.

Ramishvili, Sh D. Nepreryvnoe litʹe polykh chugunnykh zagotovok. Tbilisi: Izd-vo "Met͡s︡niereba", 1985.

Michael, Hofmann. Gekoppeltes mathematisches Modell für das Stranggiessen von NE-Metall-Rechteckformaten. Aachen: Verlag Shaker, 1992.

Zubarev, A. G. Teorii͡a︡ i tekhnologii͡a︡ proizvodstva stali dli͡a︡ MNLZ. Moskva: "Metallurgii͡a︡", 1986.

Bigeev, A. M. Nepreryvnye staleplavilʹnye prot͡s︡essy. Moskva: "Metallurgii͡a︡", 1986.

Alekseevich, Efimov Viktor, and Instytut problem lytti͡a︡ (Akademii͡a︡ nauk Ukraïnsʹkoï RSR), eds. Sovershenstvovanie prot͡s︡essov nepreryvnoĭ razlivki stali: Sbornik nauchnykh trudov. Kiev: Akademii͡a︡ nauk Ukr. SSR, In-t problem litʹi͡a︡, 1985.

International Iron and Steel Institute. Committee on Technology., ed. Continuous casting of steel 1985: A second study. Brussels: The Committee, 1986.

D'Haeyer, R. Development of new mould powders for continuous casting. Luxembourg: Commission of the European Communities, 1987.

George, Harry, and Iron and Steel Society, eds. Mold powders for continuous casting and bottom pour teeming. Warrendale, Pa: Iron and Steel Society, 1987.

M, Sergeev V., ed. Nepreryvnoe litʹe--pressovanie t͡s︡vetnykh metallov. Moskva: "Metallurgii͡a︡", 1990.

International Symposium on Developments in Ladle Steelmaking and Continuous Casting (1990 Hamilton, Ont.). International Symposium on Developments in Ladle Steelmaking and Continuous Casting: Proceedings. Montréal, Qué: Canadian Institute of Mining and Metallurgy, 1990.

F, Matthys Eric, Truckner William G, TMS Solidification Committee., TMS Synthesis and Analysis in Materials Processing Committee., and Minerals, Metals and Materials Society. Meeting, eds. Melt spinning, strip casting, and slab casting: Proceedings of a symposium sponsored by the Materials Design and Manufacturing Division (MDMD), Solidification Committee and the the [sic] joint Extraction and Processing Division (EPD) and MDMD Synthesis Control & Analysis in Materials Processing (SCAMP) Committee of the Materials, Metals & Materials Society (TMS) held during the TMS Annual Meeting in Anaheim, California, February 4-8, 1996. Warrendale, Pa: The Society, 1996.

Degenhardt, Rolf. Beitrag zur Klärung der Wirkmechanismen beim Einsatz von Stranggiesspulvern. Leipzig: VEB Deutscher Verlag für Grundstoffindustrie, 1985.

Wilson, Robert. A practical approach to continuous casting of copper-based alloys and precious metals. London: IOM Communications, 2000.

Klaus, Schwerdtfeger, Diener Arnulf, and Verein Deutscher Eisenhüttenleute, eds. Metallurgie des Stranggiessens: Giessen und Erstarren von Stahl. Düsseldorf: Stahleisen, 1992.

International Symposium on Physical Simulation (1990 Harbin, China). Physical simulation of welding, hot forming, continuous casting and heat treatment: Proceedings of the International Symposium on Physical Simulation : Harbin, China, August 25-28, 1990. Beijing: International Academic Publishers, 1991.

Sherman, Robert W. Duties and standards for moldmaking and die casting diemaker skills: Levels II & III. Fairfax, VA: National Institute for Metalworking Skills, 1999.

1936-, McLean Alex, Schade Johannes Ph D, and Iron and Steel Society, eds. Tundish metallurgy. Warrendale, PA: Iron and Steel Society, 1990.

Rees-Evans, Douglas A. Technical considerations for the horizontal continuous casting of magnesium sections. Ottawa: National Library of Canada, 1990.

D, Merchant H., Tyler D. E, Chia E. Henry, and Minerals, Metals and Materials Society. Non-ferrous Metals Committee., eds. Continuous casting of non-ferrous metals and alloys: Proceedings of a symposium. Warrendale, Pa: TMS, 1989.

Symposium, on "Ladle Metallurgy of Steel for Continuous Casting and Ingot Teeming" (1986 Hamilton Ont ). Ladle metallurgy of steel for continous casting and ingot teeming. Hamilton, Ont., Canada: Dept. of Materials Science and Engineering, McMaster University, 1986.

Institute of Metals. Ironmaking and Steelmaking Committee., ed. Continuous casting '85: Proceedings of the international conference sponsored and organized by the Ironmaking and Steelmaking Committee of the Institute of Metals and held at the Royal Lancaster Hotel, London, on 22-24 May, 1985. London: The Institute, 1985.

I︠A︡sniĭ, P. V. Rolyky MBLZ [i.e., mashyn bezperervnoho lytti︠a︡ zahotovok]: Dehradat︠s︡ii︠a︡ i trishchynostiĭkistʹ materialiv. Ternopilʹ: Dz︠h︡ura, 2009.

Y, Sahai. Tundish technology for clean steel production. Hackensack, NJ: World Scientific, 2008.

Woźniak, Dariusz. Wpływ stanónow mechanicznych w kotlinie walcowniczej na zamykanie i zgrzewanie niecia̧głości we wlewkach z cos: Influence of mechanical states in roll gap on closure and welding of discontinuities in continuously cast strands. Gliwice: Instytut Metalurgii Żelaza, 2013.

Etienne, A. Technical and economic evaluation of continuous casting in the European Community. Luxembourg: Commission of theEuropean Communities, 1985.

Ludlow, V. Pilot plant process development for horizontal continuous casting of thin slab. Luxembourg: Commission of the European Communities, 1987.

McCann, J. Evaluation, development and design of transport rollers in continuous casting plant. Luxembourg: Commission of the European Communities, 1985.

International Symposium on Direct Rolling and Hot Charging of Strand Cast Billets (1988 Montréal, Québec). Proceedings of the International Symposium on Direct Rolling and Hot Charging of Strand Cast Billets, Montreal, Canada, August 29-30, 1988. New York: Pergamon Press, 1989.

M, Margolin Sh. Ėlektroprivod mashin nepreryvnogo litʹi͡a︡ zagotovok. Moskva: "Metallurgii͡a︡", 1987.

Chabchoub, Ferid. Mathematical modelling and experimental measurements on the horizontal Ohno continuous casting process. Ottawa: National Library of Canada = Bibliothèque nationale du Canada, 1993.

J, Dixon, ed. Reduction of reciprocation marks by high frequency vibration of the continuous casting mould. Luxembourg: Commission of the European Communities, 1986.

Tanner, A. Heinrich. Revolution der Stahlindustrie: Strangguss : die Weltweite Erfolgsgeschichte der Concast AG. Zürich: Verlag Neue Zürcher Zeitung, 1997.

Marr, H. S. Control of solidification of long freezing range steels by electromagnetic stirring during continuous casting. Luxembourg: Commission of the European Communities, 1985.

Wawrzynek, Andrzej. Modelowanie krzepnięcia i stygnięcia metali oraz problemów dyfuzji ciepła za pomocą metody R-Funkcji. Gliwice: Wydawn. Politechniki Śląskiej, 1994.