Academic literature on the topic 'Contact heat and mass transfer'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Contact heat and mass transfer.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Contact heat and mass transfer"
Phattaranawik, Jirachote, and Ratana Jiraratananon. "Direct contact membrane distillation: effect of mass transfer on heat transfer." Journal of Membrane Science 188, no. 1 (June 2001): 137–43. http://dx.doi.org/10.1016/s0376-7388(01)00361-1.
Full textBrauner, N., D. Moalem Maron, and S. Sideman. "Heat and mass transfer in direct contact hygroscopic condensation." Wärme- und Stoffübertragung 21, no. 4 (July 1987): 233–45. http://dx.doi.org/10.1007/bf01004026.
Full textMadyshev, Ilnur N., Oksana S. Dmitrieva, and Andrey V. Dmitriev. "Determination of heat-mass transfer coefficients within the apparatuses with jet-film contact devices." MATEC Web of Conferences 194 (2018): 01013. http://dx.doi.org/10.1051/matecconf/201819401013.
Full textFair, James R. "Direct Contact Gas-Liquid Heat Exchange for Energy Recovery." Journal of Solar Energy Engineering 112, no. 3 (August 1, 1990): 216–22. http://dx.doi.org/10.1115/1.2930482.
Full textOLIVER, J. M., J. P. WHITELEY, M. A. SAXTON, D. VELLA, V. S. ZUBKOV, and J. R. KING. "On contact-line dynamics with mass transfer." European Journal of Applied Mathematics 26, no. 5 (August 10, 2015): 671–719. http://dx.doi.org/10.1017/s0956792515000364.
Full textAliev, E. K., V. V. Volodin, V. V. Golub, A. Yu Mikushkin, G. G. Timerbaev, and O. V. Chagin. "Comparative Heat and Mass Transfer Tests of Structured Packings with Film and Droplet Flow." Herald of the Bauman Moscow State Technical University. Series Natural Sciences, no. 4 (85) (August 2019): 4–21. http://dx.doi.org/10.18698/1812-3368-2019-4-4-21.
Full textQtaishat, M., T. Matsuura, B. Kruczek, and M. Khayet. "Heat and mass transfer analysis in direct contact membrane distillation." Desalination 219, no. 1-3 (January 2008): 272–92. http://dx.doi.org/10.1016/j.desal.2007.05.019.
Full textSadykov, R. A., and L. R. Sadikova. "BOUND MOISTURE REMOVAL: HEAT AND MASS TRANSFER IN CONTACT DRYING." Drying Technology 16, no. 8 (January 1998): 1627–47. http://dx.doi.org/10.1080/07373939808917483.
Full textAjaev, Vladimir S., and Oleg A. Kabov. "Heat and mass transfer near contact lines on heated surfaces." International Journal of Heat and Mass Transfer 108 (May 2017): 918–32. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2016.11.079.
Full textVoinov, Nikolai A., Anastasiya V. Bogatkova, and Denis A. Zemtsov. "Intensification of Heat and Mass Transfer in a Diabatic Column with Vortex Trays." ChemEngineering 6, no. 2 (April 12, 2022): 29. http://dx.doi.org/10.3390/chemengineering6020029.
Full textDissertations / Theses on the topic "Contact heat and mass transfer"
Tseitlin, Musii, and Valentina Raiko. "Ratio between heat and mass transfer when concentrating the solution in a cooling tower." Thesis, Lviv Polytechnic National University, 2019. http://repository.kpi.kharkov.ua/handle/KhPI-Press/42106.
Full textДосліджено співвідношення між інтенсивністю масопереносу в газі та передачею тепла в рідині під час концентрації випарного розчину. Встановлено, що частка опору рідини в загальному опорі переносу ентальпії зростає в діапазоні температур від 30 до 50 ° С майже в 2 рази, досягає 40%. Розроблена методика для окремого визначення коефіцієнтів масопереносу в газі і теплопередачі в рідині.
Bratuta, E. G., R. G. Akmen, T. I. Jaroshenko, and O. V. Krugliakova. "The influence of interaction surface structure and irrigation scheme on heat and mass transfer in direct contact condenser." Thesis, Országos Sugárbiológiai és Sugáregészségügyi Kutató Intézet (OSSKI), 1997. http://repository.kpi.kharkov.ua/handle/KhPI-Press/23120.
Full textMaani, Nazanin. "A MODEL FOR THE PREDICTION OF THERMAL RESPONSE OF BONE IN SURGICAL DRILLING." OpenSIUC, 2013. https://opensiuc.lib.siu.edu/theses/1245.
Full textFrackiewicz-Kaczmarek, Joanna. "Determination of the air gap thickness and the contact area under wearing conditions." Thesis, Mulhouse, 2013. http://www.theses.fr/2013MULH5151/document.
Full textThe heat and mass transfer within the clothing system is a composition of a number of physicalprocesses, such as: dry heat and vapour and liquid water transfer. Factors associated with theconstruction and use of the garment, such as body posture and movement, and clothing fitinfluence these processes significantly. This is achieved mainly by changing the size and theshape of the different layers of air trapped between the skin and clothing. Most existing mathematical clothing models assume uniform air gap between the body and fabric layers or ignore it. However, this approach disregards the non-uniform and non-linear heat,vapour and liquid water transfer, which depend on presence of contact between surfaces and onthe shape of the air layers trapped within clothing and the body regions which are not equivalentin terms of sweating process. In this study, we propose a method to accurately determine the air gap thickness and the contactarea between clothing and the human body through an advanced analysis of 3D body scans of thenude and dressed body of a male manikin. This method allowed more accurate measurement ofthe air gap thickness and the contact area than other existing methods. Additionally, in two casestudies the effect of garment design and moisture gain in fabric combined with effects of bodypart, garment type and its overall and regional fit, fabric structure and fibre type were determined.Consequently, this method will contribute to a more realistic evaluation of heat and massexchange rates through clothing systems and provide more accurate input for ergonomic andcomfort design of clothing
Sobac, Benjamin. "Evaporation de gouttes sessiles : des fluides purs aux fluides complexes." Thesis, Aix-Marseille, 2012. http://www.theses.fr/2012AIXM4801/document.
Full textThis thesis presents an experimental study on the evaporation of droplets on a solid substrate. In the first part we describe the evaporation of a liquid droplet, taking a particular interest in the influence of the substrate. The problem is approached from a new angle by ensuring that the various properties of the substrate, such as its roughness, surface energy and thermal properties, are controlled precisely. Thanks to this method it is possible to decouple the different influences of the substrate and to study evaporation in relation to various dynamics of triple lines and a wide range of contact angles, thermal conductivities and temperatures of the substrate. Experimental results are compared with the classic evaporation model, which considers evaporation as a process determined by the diffusion of vapor into the atmosphere. The study reveals the range of validity of this model and highlights the different additional mechanisms which may develop as well as their contribution. The use of an infrared camera reveals the development of a complex hydrodynamic non-axisymmetric pattern. The origin of this instability and its spatial and temporal dynamics are also explored. In the second part, the study is extended to the evaporation of a dropl of a biological suspension: human blood. As this fluid dries a complex pattern is formed which is dependent on the wettability of the substrate. Whereas a wetting situation leads to a ring-like deposit with radial cracks, a non-wetting situation reveals a complex shape composed of cracks and folds. The study focuses on the understanding of the physical mechanisms leading to these patterns and of the role of biology
Viné, Thibaut. "Caractérisation expérimentale et modélisation des transferts de matière et d’énergie lors des opérations culinaires de cuisson par contact." Thesis, université Paris-Saclay, 2020. http://www.theses.fr/2020UPASB015.
Full textCooking is one of the most common food processing operations at both domestic and industrial scale. Among the many cooking methods, contact cooking has received very little attention in the literature, particularly with regard to the transfers of mass and energy within the food and between the food and its environment. This is mostly due to the metrological and theoretical difficulties involved in the study of contact heat transfer in food processes. The aim of this thesis is to contribute to a better understanding and prediction of mass and energy transfers during contact cooking and to provide new tools (especially numerical ones) to better dimension and monitor this operation. To achieve this objective, an approach combining experimental study and modelling of transfer phenomena has been achieved. An instrumented cooking device was designed in order to carry out a large experimental campaign aimed at studying the impact of several heating conditions on the cooking of three products: potato, pancake and omelet. The results enabled the development and validation of several models capable of accurately predicting the temperature rises and water losses of these products during cooking. These models are generic enough to be easily adaptable from one product to another and transposable to different contact cooking processes
Никольский, Валерий Евгеньевич. "Синергетические реакционно-массообменные процессы в газожидкостных аппаратах и топливных агрегатах химической технологии." Thesis, Украинский государственный химико-технологический университет, 2016. http://repository.kpi.kharkov.ua/handle/KhPI-Press/24524.
Full textA thesis for Doctor of Technical degree, specialty 05.17.08 – process and equipments of chemical technology. – National Technical University "Kharkiv Polytechnic Institute" Ministry of Education and Science of Ukraine, Kharkiv, 2016. The thesis deals with the improvement of actual engineering science-technical problem: the development of the modern energy effective ecological technologies, the means of energy generation and consumption using the heat recuperation systems on the base of synergetic unity of hardware implementation of the processes and system approach. For that the methodological fundamentals and practical methods of increasing of fuel utilization efficiency in the gas-liquid apparatuses and in the fuel combustion units of chemical technology at the expense of heat processes intensification were developed. Looking for improvements in fuel efficiency and materials saving the new constructions of gas-liquid apparatuses and fuel combustion units were created. On this base the ecological and energy efficiency technological systems were synthesized. They confirm to the requirements of modern power engineering and they are acceptable for the chemical technology and the other industries, as well as for communal services and agriculture. The high-effective contact-module system was developed. It was equipped with the immersion combustion apparatuses with multiple phase inversion and oscillation modulating of contacted phases. The system can be used for heat supply of industrial and agricultural buildings, apartment houses without using boilers with heat utilization of combustion products, when heat rating of 200, 400, 600, 1000, 2000 kWt is assumed, depending a need for generated heat. The expenses for complex structures and buildings’ heating using the development are decreased by 2,5 – 2,8 times in comparison with the traditional means. Contact-module system has stood the government heat-ecological test, which confirmed its high efficiency, ecological compatibility, serviceability. Construction standard specifications for serial production in the different branches of economy were obtained. The developed and presented in the thesis apparatuses, technological processes and equipments were applied in chemistry, metallurgy, motor-car industries and in communal services in Ukraine and CIS countries.
Нікольський, Валерій Євгенович. "Синергетичні реакційно-масообмінні процеси в газорідинних апаратах і паливних агрегатах хімічної технології." Thesis, НТУ "ХПІ", 2016. http://repository.kpi.kharkov.ua/handle/KhPI-Press/24517.
Full textA thesis for Doctor of Technical degree, specialty 05.17.08 – process and equipments of chemical technology. – National Technical University "Kharkiv Polytechnic Institute" Ministry of Education and Science of Ukraine, Kharkiv, 2016. The thesis deals with the improvement of actual engineering science-technical problem: the development of the modern energy effective ecological technologies, the means of energy generation and consumption using the heat recuperation systems on the base of synergetic unity of hardware implementation of the processes and system approach. For that the methodological fundamentals and practical methods of increasing of fuel utilization efficiency in the gas-liquid apparatuses and in the fuel combustion units of chemical technology at the expense of heat processes intensification were developed. Looking for improvements in fuel efficiency and materials saving the new constructions of gas-liquid apparatuses and fuel combustion units were created. On this base the ecological and energy efficiency technological systems were synthesized. They confirm to the requirements of modern power engineering and they are acceptable for the chemical technology and the other industries, as well as for communal services and agriculture. The high-effective contact-module system was developed. It was equipped with the immersion combustion apparatuses with multiple phase inversion and oscillation modulating of contacted phases. The system can be used for heat supply of industrial and agricultural buildings, apartment houses without using boilers with heat utilization of combustion products, when heat rating of 200, 400, 600, 1000, 2000 kWt is assumed, depending a need for generated heat. The expenses for complex structures and buildings’ heating using the development are decreased by 2,5 – 2,8 times in comparison with the traditional means. Contact-module system has stood the government heat-ecological test, which confirmed its high efficiency, ecological compatibility, serviceability. Construction standard specifications for serial production in the different branches of economy were obtained. The developed and presented in the thesis apparatuses, technological processes and equipments were applied in chemistry, metallurgy, motor-car industries and in communal services in Ukraine and CIS countries.
Abada, Fella. "Transport d'humidité en matériaux poreux en présence d'un gradient de température : caractérisation expérimentale." Université Joseph Fourier (Grenoble), 1994. http://www.theses.fr/1994GRE10135.
Full textNadim, Pedram. "Irreversibility of combustion, heat and mass transfer." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for energi- og prosessteknikk, 2011. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-13651.
Full textBooks on the topic "Contact heat and mass transfer"
Kreith, Frank, and R. F. Boehm, eds. Direct-Contact Heat Transfer. Berlin, Heidelberg: Springer Berlin Heidelberg, 1988. http://dx.doi.org/10.1007/978-3-662-30182-1.
Full textBaehr, H. D. Heat and mass transfer. Berlin: Springer, 1998.
Find full textBaehr, H. D. Heat and Mass Transfer. Berlin, Heidelberg: Springer-Verlag Berlin Heidelberg, 2011.
Find full textBaehr, Hans Dieter, and Karl Stephan. Heat and Mass Transfer. Berlin, Heidelberg: Springer Berlin Heidelberg, 2006. http://dx.doi.org/10.1007/3-540-29527-5.
Full textKarwa, Rajendra. Heat and Mass Transfer. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-3988-6.
Full textBaehr, Hans Dieter, and Karl Stephan. Heat and Mass Transfer. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-20021-2.
Full textKarwa, Rajendra. Heat and Mass Transfer. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-1557-1.
Full textBaehr, Hans Dieter, and Karl Stephan. Heat and Mass Transfer. Berlin, Heidelberg: Springer Berlin Heidelberg, 1998. http://dx.doi.org/10.1007/978-3-662-03659-4.
Full textMills, Anthony F. Heat and mass transfer. Burr Ridge, Ill: Irwin, 1995.
Find full textWhite, Frank M. Heat and mass transfer. Reading, Mass: Addison-Wesley, 1988.
Find full textBook chapters on the topic "Contact heat and mass transfer"
Perona, J. J. "Mass Transfer Effects in Heat Transfer Processes." In Direct-Contact Heat Transfer, 67–81. Berlin, Heidelberg: Springer Berlin Heidelberg, 1988. http://dx.doi.org/10.1007/978-3-662-30182-1_5.
Full textMarschall, E. "Discussion of Mass Transfer Effects and Liquid-Liquid Transport." In Direct-Contact Heat Transfer, 119–25. Berlin, Heidelberg: Springer Berlin Heidelberg, 1988. http://dx.doi.org/10.1007/978-3-662-30182-1_7.
Full textBorghi, Roland, and Fabien Anselmet. "Modeling of Cauchy Tensor of Sliding Contacts." In Turbulent Multiphase Flows with Heat and Mass Transfer, 349–61. Hoboken, USA: John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118790052.ch14.
Full textDmitriev, A. V., I. N. Madyshev, and O. S. Dmitrieva. "Separation Efficiency of the Heat–Mass Transfer Apparatuses with Jet-Film Contact Devices." In Proceedings of the 4th International Conference on Industrial Engineering, 1903–9. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-95630-5_204.
Full textMadyshev, I. N., O. S. Dmitrieva, and A. V. Dmitriev. "Development of New Types of Contact Devices for Heat-Mass Transfer Apparatuses, Used at Petrochemical Enterprises." In Lecture Notes in Mechanical Engineering, 95–101. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-22063-1_11.
Full textKluitenberg, Gerard J., and Joshua L. Heitman. "Effect of forced convection on soil water content measurement with the dual-probe heat-pulse method." In Environmental Mechanics: Water, Mass and Energy Transfer in the Biosphere, 275–83. Washington, D. C.: American Geophysical Union, 2002. http://dx.doi.org/10.1029/129gm23.
Full textKarwa, Rajendra. "Mass Transfer." In Heat and Mass Transfer, 929–48. Singapore: Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-1557-1_15.
Full textKarwa, Rajendra. "Mass Transfer." In Heat and Mass Transfer, 1041–66. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-3988-6_15.
Full textDmitriev, A., I. Madyshev, and A. Khafizova. "The Study of Influence of Hole Diameter Within the Inclined-Corrugated Contact Elements on the Hydraulic and Heat-Mass Transfer Characteristics of Cooling Toweraper." In Lecture Notes in Mechanical Engineering, 874–82. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-54817-9_101.
Full textBharathan, D. "Direct-Contact Evaporation." In Direct-Contact Heat Transfer, 203–22. Berlin, Heidelberg: Springer Berlin Heidelberg, 1988. http://dx.doi.org/10.1007/978-3-662-30182-1_11.
Full textConference papers on the topic "Contact heat and mass transfer"
Brauner, Neima, David Moalem-Maron, and Samuel Sideman. "SIMULTANEOUS MASS AND HEAT TRANSFER IN DIRECT CONTACT HYGROSCOPIC CONDENSATION." In International Heat Transfer Conference 8. Connecticut: Begellhouse, 1986. http://dx.doi.org/10.1615/ihtc8.80.
Full textYoo, Seong-Yeon, Hwa-Kil Kwon, and Kwang-Young Kim. "A Study on Heat and Mass Transfer for Air/Water Direct-Contact Air Conditioning System." In International Heat Transfer Conference 12. Connecticut: Begellhouse, 2002. http://dx.doi.org/10.1615/ihtc12.4760.
Full textQueiroz, E. M. "ON THE TRANSIENT HEAT AND MASS TRANSFER MODELING OF DIRECT CONTACT EVAPORATORS." In International Symposium on Transient Convective Heat Transfer. New York: Begellhouse, 1996. http://dx.doi.org/10.1615/ichmt.1996.transientconvheattransf.180.
Full textLiu, Qingquan, and Norman C. Tien. "Design and Modeling of Liquid Gallium Contact RF MEMS Switch." In ASME 2009 Second International Conference on Micro/Nanoscale Heat and Mass Transfer. ASMEDC, 2009. http://dx.doi.org/10.1115/mnhmt2009-18257.
Full textTachon, Loi¨c, Stephan Guignard, and Loune`s Tadrist. "Experimental Investigation of a Contact Line Dynamic Induced by Liquid Evaporation Heat and Mass Transfer." In 2010 14th International Heat Transfer Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/ihtc14-22562.
Full textHöhne, Thomas, Stasys Gasiunas, and Marijus Šeporaitis. "Numerical Modelling of a Direct Contact Condensation Experiment." In The 2nd World Congress on Momentum, Heat and Mass Transfer. Avestia Publishing, 2017. http://dx.doi.org/10.11159/icmfht17.102.
Full textKaya, Vildan Girişta, Vedat Temiz, Zeynep Parlar, and Levent Kavurmacıoğlu. "Design of A New Non-Contact Screw Seal and Determination of Performance Characteristics." In The World Congress on Momentum, Heat and Mass Transfer. Avestia Publishing, 2016. http://dx.doi.org/10.11159/enfht16.114.
Full textDe Salve, Mario, Bruno Panella, and G. Scorta. "HEAT AND MASS TRANSFER DURING THE DEPRESSURIZATTON INDUCED BY DIRECT CONTACT CONDENSATION OF STEAM ON A SUBCOOLED LIQUID JET." In International Heat Transfer Conference 9. Connecticut: Begellhouse, 1990. http://dx.doi.org/10.1615/ihtc9.3690.
Full textAbdulrahman, Mohammed W. "CFD Analysis of Temperature Distributions in a Slurry Bubble Column with Direct Contact Heat Transfer." In International Conference of Fluid Flow, Heat and Mass Transfer. Avestia Publishing, 2016. http://dx.doi.org/10.11159/ffhmt16.119.
Full textHong, Fangjun, Ping Cheng, Zhen Sun, and Huiying Wu. "Simulation of Spreading Dynamics of a EWOD Droplet With Dynamic Contact Angle and Contact Angle Hysteresis." In ASME 2009 Second International Conference on Micro/Nanoscale Heat and Mass Transfer. ASMEDC, 2009. http://dx.doi.org/10.1115/mnhmt2009-18558.
Full textReports on the topic "Contact heat and mass transfer"
Walton, George N. Validation test of an earth contact heat transfer algorithm. Gaithersburg, MD: National Bureau of Standards, 1985. http://dx.doi.org/10.6028/nbs.ir.85-3201.
Full textZyvoloski, G., Z. Dash, and S. Kelkar. FEHM: finite element heat and mass transfer code. Office of Scientific and Technical Information (OSTI), March 1988. http://dx.doi.org/10.2172/5495517.
Full textZyvoloski, G., Z. Dash, and S. Kelkar. FEHMN 1.0: Finite element heat and mass transfer code. Office of Scientific and Technical Information (OSTI), April 1991. http://dx.doi.org/10.2172/138080.
Full textBohn, M. Heat transfer and pressure drop measurements in an air/molten salt direct-contact heat exchanger. Office of Scientific and Technical Information (OSTI), November 1988. http://dx.doi.org/10.2172/10102019.
Full textGoldstein, R. J., and M. Y. Jabbari. The impact of separated flow on heat and mass transfer. Office of Scientific and Technical Information (OSTI), January 1990. http://dx.doi.org/10.2172/6546146.
Full textPesaran, A. A. Heat and mass transfer analysis of a desiccant dehumidifier matrix. Office of Scientific and Technical Information (OSTI), July 1986. http://dx.doi.org/10.2172/5438707.
Full textBell, J., and L. Hand. Calculation of Mass Transfer Coefficients in a Crystal Growth Chamber through Heat Transfer Measurements. Office of Scientific and Technical Information (OSTI), April 2005. http://dx.doi.org/10.2172/918405.
Full textPickrell, Mark M., Matt Briggs, Mark Marr-Lyon, Larry Hull, Mike Shinas, and Daniel Creveling. Heat Transfer Analysis from laser Energy on Metal Parts in Contact with HE. Office of Scientific and Technical Information (OSTI), August 2018. http://dx.doi.org/10.2172/1467311.
Full textMaclaine-Cross, I. L., and A. A. Pesaran. Heat and Mass Transfer Analysis of Dehumidifiers Using Adiabatic Transient Tests. Office of Scientific and Technical Information (OSTI), April 1986. http://dx.doi.org/10.2172/1129251.
Full textDrost, Kevin, Goran Jovanovic, and Brian Paul. Microscale Enhancement of Heat and Mass Transfer for Hydrogen Energy Storage. Office of Scientific and Technical Information (OSTI), September 2015. http://dx.doi.org/10.2172/1225296.
Full text