Relevant bibliographies by topics / Coning

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Coning'

Author: Grafiati
Published: 4 June 2021
Last updated: 19 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Coning.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Coning"

1

Richardson, J. G., J. B. Sangree, and R. M. Sneider. "Coning." Journal of Petroleum Technology 39, no. 08 (August 1, 1987): 883–84. http://dx.doi.org/10.2118/15787-pa.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Farmen, Jonn-Erik, Geri Wagner, Unni Oxaal, Paul Meakin, Jens Feder, and Torstein Jøssang. "Dynamics of water coning." Physical Review E 60, no. 4 (October 1, 1999): 4244–51. http://dx.doi.org/10.1103/physreve.60.4244.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Tang, Chuanye, and Xiyuan Chen. "Constrained Coning Correction Algorithms." Journal of Aerospace Engineering 31, no. 4 (July 2018): 04018029. http://dx.doi.org/10.1061/(asce)as.1943-5525.0000844.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Jiang, Y. F., and Y. P. Lin. "Improved strapdown coning algorithms." IEEE Transactions on Aerospace and Electronic Systems 28, no. 2 (April 1992): 484–90. http://dx.doi.org/10.1109/7.144574.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Wang, Rong, Kui Zhang, Yong Gang Duan, and Ting Kuan Cao. "Evaluating Water Coning Control for Horizontal Well in Bottom-Water Sandstone Reservoirs by Numerical Method." Advanced Materials Research 524-527 (May 2012): 292–96. http://dx.doi.org/10.4028/www.scientific.net/amr.524-527.292.

Full text
Abstract:
Horizontal well is the main technology to develop bottom-water sandstone reservoirs. Water coning has a significant influence on development effect, and shut-in coning control is one of coning suppression methods. Based on the geological model of a given oilfield, this paper has made an evaluation of water coning control by numerical simulation. It can be concluded that the method of shut-in coning control is effective for low water cut wells. When shutting in, the lower the water cut is, the greater decline extent of water cut can be obtained and the higher cumulative oil production can be achieved after well reopening. The longer the close time is, the better water coning control effect can be acquired, however it will affect oil production undoubtly. When horizontal well enters into high water cut stage, shut-in coning control not only has almost no effect, but also has a negative impact on the normal oil production.
APA, Harvard, Vancouver, ISO, and other styles
6

Schulze, Bernd, and Walter Whiteley. "Coning, Symmetry and Spherical Frameworks." Discrete & Computational Geometry 48, no. 3 (May 4, 2012): 622–57. http://dx.doi.org/10.1007/s00454-012-9427-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Gunning, James, Lincoln Paterson, and Boris Poliak. "Coning in dual completed systems." Journal of Petroleum Science and Engineering 23, no. 1 (May 1999): 27–39. http://dx.doi.org/10.1016/s0920-4105(99)00006-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Obaro, S. K. "Avoiding coning in childhood meningitis." BMJ 306, no. 6893 (June 19, 1993): 1691–92. http://dx.doi.org/10.1136/bmj.306.6893.1691-c.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Pulec, Jack L. "Cerumen and Coning Candle Chicanery." Ear, Nose & Throat Journal 75, no. 9 (September 1996): 574. http://dx.doi.org/10.1177/014556139607500901.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Platus, D. H. "Missile and spacecraft coning instabilities." Journal of Guidance, Control, and Dynamics 17, no. 5 (September 1994): 1011–18. http://dx.doi.org/10.2514/3.21303.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Coning"

1

Astutik, Wynda. "IPR Modeling for Coning Wells." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for petroleumsteknologi og anvendt geofysikk, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-19518.

Full text
Abstract:
In this study, based on the work of Vogel, we generated the Inflow Performance Relationship (IPR) curves and its dimensionless form at any stage of depletion using black-oil simulator results. The IPR was generated for horizontal well with gas and water coning problems, producing from thin oil reservoir sandwiched between gas cap and aquifer. Two empirical IPR equations adopted from SPE paper by Whitson was also presented here. The first empirical relationship was developed based on simulated data for each reservoir pressure (stage of depletion) while the second relationship was developed based on all generated data.A fully implicit black-oil Cartesian model with total grid number of 1480 and 150 ft total thickness was used as reservoir model. The horizontal well extends through the full length of reservoir in y-direction with only one grid number along the horizontal section which makes the model a 2D problem. Sensor reservoir simulator and Pipe-It software were utilized to generate the IPR data.This work also includes a sensitivity study to understand the effect of several parameters to gas and water coning behavior, well placement optimization, coning collapse study, and the effect of coning to maximum well production rate. In coning collapse study, a relationship between flowing bottom-hole pressure and reservoir pressure when the cone collapse is provided in graphical form. This could be useful in field application where chocking the well to lower flowing bottom-hole pressure has become one alternative to reduce coning problems.
APA, Harvard, Vancouver, ISO, and other styles
2

Ronen, Jonathan. "Boundary Control of the Gas Coning Problem." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for teknisk kybernetikk, 2010. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-11460.

Full text
Abstract:
This thesis was set to tackle the gas coning problem in oil-rim reservoirs with horizontal wells. The focus was short term production planning in the sub-critical phase only. Different controllers were developed and assessed based on the objective of net-present-value (NPV) of oil produced in the sub-critical phase.The reservoir model is a 1-D partial differential equation describing the dynamics of the gas-oil contact (GOC), for a homogeneous reservoir. Gas coning is considered to be the deformation of the GOC towards the well.Several controllers were developed and assessed alongside control laws from previous research: (i) the Backstepping method was used to develop a state-feedback controller, along with an observer. Coupled they make the Backstepping output-feedback controller. (ii) an output-feedback controller based on the structure proposed by previous research. (iii) linear-quadratic optimal control.An extended Kalman filter was also considered as a state observer, alongside the Backstepping observer.The backstepping controller did not deliver an increase of sub-critical payout which warrants the complicated structure of an observer-controller pair. It was even outperformed by simpler, output-feedback control laws. The optimal linear-quadratic controller achieved the best NPV of sub-critical production by far. This makes it the most attractive control strategy presented, even when considering that a real-world implementation will need to be paired with a state observer.
APA, Harvard, Vancouver, ISO, and other styles
3

Okon, Anietie Ndarake. "WATER CONING IN FRACTURED RESERVOIRS: A SIMULATION STUDY." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for petroleumsteknologi og anvendt geofysikk, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-19598.

Full text
Abstract:
Water coning is a complex phenomenon that depends on a large number of variables which include among others: production rate, perforation interval, mobility ratio, capillary pressure, etc. Its production can greatly affect the productivity of a well and the reservoir at large. In fractured reservoirs, the phenomenon is more complex owing to the high permeability of the fractures in the porous media. With this complexity in mind, water coning behaviour in fractured reservoir was studied by simulating a reservoir supported by a strong aquifer using ECLIPSE-100 Black-Oil Simulator. The water cut (WCT), oil production rate (OPR) and water saturation (BWSAT) at the producing interval (Block 1, 1, 7) were used to evaluate the coning phenomenon in a fractured reservoir. In the course of the study, sensitivity analyses on the modelled reservoir’s anisotropy ratio (kv/kh), production rate (q), storativity capacity (ω), fracture width (b) and fracture permeability (kf) were conducted to evaluate their effect on coning behaviour in fractured reservoir. The results obtained depict that while the anisotropy ratio is very significant in water cut and water saturation at the perforating interval it has no adverse effect on oil production rate. It was however, observed that the water cut and oil production rate decreased as the production rate (q) increased. Furthermore, the water cut, oil production rate and water saturation (BWSAT) from the fractured reservoir is sensitive to the storativity capacity (ω) depending on the fracture porosity (φf). Conversely, the fracture’s width (b) and permeability (kf) have no significant effect on the coning behaviour of the modelled fracture reservoir. However, anisotropy ratio (kv/kh), production rate as well as storativity capacity (ω) are significant parameters in evaluating coning phenomenon in fractured reservoirs.
APA, Harvard, Vancouver, ISO, and other styles
4

Ayeni, Kolawole Babajide. "Empirical modeling and simulation of edgewater cusping and coning." Texas A&M University, 2008. http://hdl.handle.net/1969.1/85948.

Full text
Abstract:
In many cases, it is important to predict water production performance of oil wells early in, or maybe before, their production life. In as much as oil field water is important for pressure maintenance purposes and displacement of oil towards the perforation of the producing well, excessive water production leads to increased cost. In the case when no provision is made, it represents a significant liability. The case considered here is a well producing from a monocline with an edge-water aquifer. Although such problems can be computed with reservoir simulation, the objective of this work was to develop an empirical method of making water production predictions. The reservoir model was described as a single well producing from the top of a monocline drainage block with water drive from an infinite-acting aquifer. During the reservoir simulation runs, water would cusp and cone into the well, increasing water production and decreasing oil production. A number of simulation runs were made, varying eleven model variables. Typical model variables include dip angle, formation thickness and production rate. For each run a modified Addington-style plot was made. The relationship between each model parameter and three graphical variables was used to develop the set of empirical correlations. The empirical correlations developed were integrated with some derived equations that relate important reservoir parameters and incorporated into a computer program. The developed correlations and program can be used to carry out sensitivity analysis to evaluate various scenarios at the early planning stages when available reservoir data are limited. This gives a quick and easy method for forecasting production performance with an active edge-water drive. Furthermore, the approach developed in the research can be applied to other water production problems in other fields/reservoirs. The developed program was validated and used to evaluate synthetic and field cases. Overall, a good match was achieved.
APA, Harvard, Vancouver, ISO, and other styles
5

Shevchenko, Egor. "Experimental study of water coning phenomenon in perforated pipes geometry." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for energi- og prosessteknikk, 2013. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-23086.

Full text
Abstract:
This Master Thesis is performed in close cooperation between NTNU and Statoil Research Centre in Rotvoll, Trondheim. It focuses on the experimental study of the water coning phenomenon in perforated pipe geometry. This study refers to Statoil data on horizontal well design, geometry of the ICD/AICD housing, production rates and fluid properties.The experimental facilities were designed during the autumn semester in the project ?Experimental setup for water coning in horizontal annular pipe geometries?. It is based on the 2D-configuration setup and was used for flow visualization experiments.The study provides extensive literature review of the problem. It describes existing industry experience and shows available academic research in the area of the coning phenomenon. Detailed hazard identification and risk assessments analysis were performed according to the NTNU and SINTEF safety procedures prior to starting of the work in the lab. The necessary measures for risk reduction were implemented. The event, possibly compromising safety level of the experimental runs, was documented and investigated in order to prevent similar reoccurrences in future.The total number of 459 experiments with different rig and oil/water flow setup was conducted. Results are presented in clear graphical form in excel spreadsheet attached to the thesis. It shows key trends in oil/water flow behaviour in the gap towards a drainage hole, representing reservoir fluid inflow into the well tubing through the Inflow Control Device (ICD). Discussion part puts emphasis on the explanation of the obtained results and provides important input to improve the design of ICD.
APA, Harvard, Vancouver, ISO, and other styles
6

Khalili, Ali Petroleum engineering UNSW. "A review of critical coning rate correlations and identifying the most reliable equation." Awarded by:University of New South Wales. Petroleum engineering, 2005. http://handle.unsw.edu.au/1959.4/22388.

Full text
Abstract:
The study of coning in oil production is important because of huge water production associated with oil production around the world each year. Estimation of critical coning rate has been the subject of numerous studies and a number of correlations have been reported. This study presents a review of the current available methods for estimating critical coning rate for both vertical and horizontal wells. The various methods and correlations are compared and the assumptions on which they are based evaluated. Following comparison made between the correlations, the most reliable theories are identified for both vertical and horizontal wells separately. Among the correlations for vertical wells, this study recommends two implicit methods presented by Wheatley and Azar Nejad et al. They determined the oil potential distribution influenced by water cone with a remarkable accuracy. For horizontal wells, two methods, Joshi???s equation and Rechem et al formula, are considered to be the most reliable. Joshi???s equation provides lower estimates than Chaperon???s correlation in which the water cone effect on oil potential was neglected. The Recham et al formula also gives a similar result. On the whole, the Rechem et al method is preferred.
APA, Harvard, Vancouver, ISO, and other styles
7

Couper, Christine Judith. "Morphology and physiology of bud development and coning in Pinus contorta Dougl." Thesis, University of Edinburgh, 1987. http://hdl.handle.net/1842/12010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Selmi, Mohamed. "Resonance phenomena in viscous fluid configurations inside a spinning and coning cylinder." The Ohio State University, 1991. http://rave.ohiolink.edu/etdc/view?acc_num=osu1300360400.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Johnson, David Craig. "A coning motion apparatus for hydrodynamic model testing in a non-planar cross-flow." Thesis, Massachusetts Institute of Technology, 1989. http://hdl.handle.net/10945/25780.

Full text
Abstract:
As part of continuing research into the flow about slender bodies of revolution, a coning motion apparatus for hydrodynamic model testing was built and demonstrated. This is the first known use of a rotary balance apparatus for external flow hydrodynamic applications. The vorticity shed by the hull and appendages creates a wake field that interacts with the velocity distribution over the vehicle's surface. This in turn effects the surface pressure distribution and thus, when integrated over the body's surface, the total force on the hull/appendage combination. It is this interaction that prevents a closed-form analytic solution to the problem. Keywords: Fluid mechanics. (JES)
APA, Harvard, Vancouver, ISO, and other styles
10

Isemin, Isemin Akpabio. "Numerical Simulation of Gas Coning of a Single Well Radial in a Naturally Fractured Reservoir." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for petroleumsteknologi og anvendt geofysikk, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-19275.

Full text
Abstract:
Gas coning is the tendency of the gas to drive oil downward in an inverse cone due to the downward movement of gas into the perforations of a producing well thereby reducing oil production and the overall recovery efficiency of the oil reservoir. This work addresses gas coning issues in a naturally fractured reservoir via a numerical simulation approach on a single-well radial cross-section using the ECLIPSE 100 reservoir simulator. Matrix and fracture properties are modelled. Critical rate, breakthrough time and GOR after breakthrough is determined which is used to investigate the effect of matrix and fracture properties on gas coning effective reservoir parameters such as oil flow rate, matrix and fracture porosity, vertical and horizontal matrix and fracture permeability, matrix block size, etc. Results show that reservoir parameters that affect coning include oil flow rate, matrix and fracture porosity, matrix and vertical permeability, anisotropy ratio, perforated interval thickness, density difference and mobility ratio. While matrix block size and fracture spacing have no significant effect on gas coning.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Coning"

1

Maziat, Reza. Prediction of the aerodynamic characteristics of wings and bodies in coning motion. Manchester: University ofManchester, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Johnson, David Craig. A coning motion apparatus for hydrodynamic model testing in a non-planar cross-flow. Springfield, Va: Available from the National Technical Information Service, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Eccles, Thomas John. Measurement of hydrodynamic forces and moments and flow field mapping of a model in coning motion. Springfield, Va: Available from the National Technical Information Service, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Forster, Victor W. Conning the Canadians. Vancouver: V. Forster Pub., 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Fusco, Gianni Di. Confine. Forli: Forum/Quinta Generazione, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bofill, Rafael M. Joan Condins. Barcelona: Ambit Serveis Editorials, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Nunzio. Nunzio confini. Roma: Galleria dell'oca, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Concino Concini maresciallo d'Ancre: Ascesa e caduta di un gentiluomo toscano alla corte di Francia (1600-1617). Firenze, Italy: Aska, 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Conng xian dai dao dang dai. Taibei Shi: San min shu ju, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Mignano, Salvatore. Ai confini dell'Austria. Firenze: Vallecchi Editore, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Coning"

1

Gooch, Jan W. "Coning." In Encyclopedic Dictionary of Polymers, 166. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_2834.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bradbury, Andrew. "Coning Hybridoma cDNA by RACE." In Antibody Engineering, 15–20. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-01144-3_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Liu, Baoqing, and Huimin Dong. "A Method for Evaluation of Coning Error Based on Adaptive Cone." In Intelligent Robotics and Applications, 640–49. Berlin, Heidelberg: Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-88518-4_69.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Rizvi, Farheen. "Solar Sail Coning Control to Induce Orbital Effects in Spinning Versus Non-spinning Sails." In Advances in Solar Sailing, 737–53. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-34907-2_45.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Fu, Ying, Zheng-jun Zhu, Chao Zhang, Tao Shi, Hui Ma, and Kai Feng. "Research on Reasonable Water Injection Parameters of Water Flowing Barrier to Delay Bottom Water Coning." In Proceedings of the International Field Exploration and Development Conference 2018, 1066–72. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-7127-1_98.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Zhu, Weiyao, Xiaohe Huang, and Ming Yue. "A Modified Calculation Method for the Water Coning Simulation Mode in Oil Reservoirs with Bottom Water Drive." In Gas Injection for Disposal and Enhanced Recovery, 331–37. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118938607.ch19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Stolleis, Michael. "Conring, Hermann." In Kindlers Literatur Lexikon (KLL), 1. Stuttgart: J.B. Metzler, 2020. http://dx.doi.org/10.1007/978-3-476-05728-0_11159-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Jennings, George A. "Conics." In Modern Geometry with Applications, 83–113. New York, NY: Springer New York, 1994. http://dx.doi.org/10.1007/978-1-4612-0855-6_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bix, Robert. "Conics." In Conics and Cubics, 69–125. New York, NY: Springer New York, 1998. http://dx.doi.org/10.1007/978-1-4757-2975-7_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Beckett, Stephen T., Konstantinos Paggios, and Ian Roberts. "Conching." In Beckett's Industrial Chocolate Manufacture and Use, 241–73. Chichester, UK: John Wiley & Sons, Ltd, 2017. http://dx.doi.org/10.1002/9781118923597.ch10.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Coning"

1

J. T. Floris, Frans. "Coning Simulation more Accurately." In ECMOR I - 1st European Conference on the Mathematics of Oil Recovery. European Association of Geoscientists & Engineers, 1989. http://dx.doi.org/10.3997/2214-4609.201411336.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

PLATUS, D. "Missile and spacecraft coning instabilities." In Astrodynamics Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1992. http://dx.doi.org/10.2514/6.1992-4562.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

M. Stovas, A., and M. Landro. "4D Detection of Gas Coning." In 69th EAGE Conference and Exhibition incorporating SPE EUROPEC 2007. European Association of Geoscientists & Engineers, 2007. http://dx.doi.org/10.3997/2214-4609.201401777.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Al-Afaleg, N. I., and Iraj Ershaghi. "Coning Phenomena in Naturally Fractured Reservoirs." In SPE Western Regional Meeting. Society of Petroleum Engineers, 1993. http://dx.doi.org/10.2118/26083-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Leemhuis, Anton Peter, Stefan Belfroid, and Garrelt Alberts. "Gas Coning Control for Smart Wells." In SPE Annual Technical Conference and Exhibition. Society of Petroleum Engineers, 2007. http://dx.doi.org/10.2118/110317-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Egbe, ThankGod, and Dulu Appah. "Water Coning Diagnosis Using Spectral Analysis." In Nigeria Annual International Conference and Exhibition. Society of Petroleum Engineers, 2005. http://dx.doi.org/10.2118/98816-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Permadi, P. "Fast Horizontal-Well Coning Evaluation Method." In SPE Asia Pacific Oil and Gas Conference. Society of Petroleum Engineers, 1996. http://dx.doi.org/10.2118/37032-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

ERICSSON, L. "Prediction of slender body coning characteristics." In 7th Applied Aerodynamics Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1989. http://dx.doi.org/10.2514/6.1989-2223.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Papatzacos, Paul. "Gas-Coning by a Horizontal Well." In ECMOR I - 1st European Conference on the Mathematics of Oil Recovery. European Association of Geoscientists & Engineers, 1989. http://dx.doi.org/10.3997/2214-4609.201411344.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Saad, Saad El-Din M., Tarek D. Darwich, and Yousri Asaad. "Water Coning in Fractured Basement Reservoirs." In Middle East Oil Show. Society of Petroleum Engineers, 1995. http://dx.doi.org/10.2118/29808-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Coning"

1

Platus, D. H. Missile and Spacecraft Coning Instabilities. Fort Belvoir, VA: Defense Technical Information Center, February 1998. http://dx.doi.org/10.21236/ada349546.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Cooper, Gene R. Moments on a Coning Projectile by a Spinning Liquid in Porous Media. Fort Belvoir, VA: Defense Technical Information Center, September 2005. http://dx.doi.org/10.21236/ada444065.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Cooper, Gene R. Moments on a Coning M864 by a Liquid Payload: The Candlestick Problem and Porous Media. Fort Belvoir, VA: Defense Technical Information Center, July 2006. http://dx.doi.org/10.21236/ada453380.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bashelor, Andrew Clark. Enumerative Algebraic Geometry: Counting Conics. Fort Belvoir, VA: Defense Technical Information Center, May 2005. http://dx.doi.org/10.21236/ada437184.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Soanes, Royce W. Thrice Differentiable Affine Conic Spline Interpolation. Fort Belvoir, VA: Defense Technical Information Center, September 1995. http://dx.doi.org/10.21236/ada304778.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Piper, L. G., S. J. Davis, H. C. Murphy, W. C. Cummings, and L. P. Walkauskas. CONAN; Chemistry of Nitrogen-A Nascence. Fort Belvoir, VA: Defense Technical Information Center, January 1988. http://dx.doi.org/10.21236/ada193122.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Terlaky, Tamas. Mixed-Integer Conic Linear Programming: Challenges and Perspectives. Fort Belvoir, VA: Defense Technical Information Center, October 2013. http://dx.doi.org/10.21236/ada590477.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

McCune, W., and R. Padmanabhan. An equational characterization of the conic construction of cubic curves. Office of Scientific and Technical Information (OSTI), May 1995. http://dx.doi.org/10.2172/516005.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Mittelmann, Hans D. Nonlinear Multidimensional Assignment Problems Efficient Conic Optimization Methods and Applications. Fort Belvoir, VA: Defense Technical Information Center, June 2015. http://dx.doi.org/10.21236/ada627005.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bendito, Enrique, Mark J. Bowick, and Agustin Medina. A Natural Parameterization of the Roulettes of the Conics Generating the Delaunay Surfaces. Jgsp, 2014. http://dx.doi.org/10.7546/jgsp-33-2014-27-45.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Coning' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography