Relevant bibliographies by topics / Composite

Academic literature on the topic 'Composite'

Author: Grafiati
Published: 4 June 2021
Last updated: 7 September 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Composite.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Composite"

1

Sari, Nasmi Herlina, Suteja Suteja, and Yusuf Akhyar Sutaryono. "The Mechanical Properties of a Water Hyacinth/Rice Husk Powders Composite for Tissue Engineering Applications." Journal of Fibers and Polymer Composites 2, no. 2 (October 30, 2023): 145–56. http://dx.doi.org/10.55043/jfpc.v2i2.123.

Full text
Abstract:
In this study, composites made from water hyacinth powder (WPH) and rice husk powder (RH) were created using the hot press method, and the composites were characterized to determine their suitability for biomedical applications such as tissue engineering. The mixing ratio of WPH/RH was investigated. Fourier transmission infrared spectroscopy (FTIR) revealed the presence of chemical bonds in the composites under investigation. Tensile tests were used to investigate the mechanical properties of the composite, which revealed that adding water WPH to the rice husk composite reduced the composite's strength. A composite with a 5% WPH content had the highest tensile strength of 32.72 MPa. Meanwhile, the mechanical strength of the other composites studied ranged from 25,537 MPa to 29.43 MPa. However, the elastic modulus of the composite increased with the addition of WPH. The SEM image shows that the powder distribution is less even, the interface between WPH-RH and polyester is quite tight, and the composite contains a number of voids. Characterization of the developed composite demonstrates that the WPH/RH addition ratio can be adjusted to achieve the desired composite properties for tissue engineering and cartilage regeneration applications.
APA, Harvard, Vancouver, ISO, and other styles
2

Kala, Shiva Kumar, and Chennakesava Reddy Alavala. "Enhancement of Mechanical and Wear Behavior of ABS/Teflon Composites." Trends in Sciences 19, no. 9 (April 8, 2022): 3670. http://dx.doi.org/10.48048/tis.2022.3670.

Full text
Abstract:
In the present investigations, Most of the engineering applications of metallic materials are replaced by polymeric based composite materials. Because of the low cost and accessible handling of polymer composite materials such as Acrylonitrile butadiene styrene (ABS) matrix materials are used to make the composites with additions of filler enhance the properties of the matrix materials. In the present study, ABS matrix material is used to make the composite materials by adding the Teflon materials. Investigations are carried out to find the enhancement of the composites' mechanical properties. Optimizing the process parameters is done to identify the composite's most optimum used to get composite with better mechanical properties. SEM analysis and wear Debris are investigated to study the microscopic surface nature and behavior of the composites.
APA, Harvard, Vancouver, ISO, and other styles
3

Kobayashi, Junya, Masahiro Kaneko, Chamaiporn Supachettapun, Kenji Takada, Tatsuo Kaneko, Joon Yang Kim, Minori Ishida, Mika Kawai, and Tetsu Mitsumata. "Mechanical Properties and Reinforcement of Paper Sheets Composited with Carboxymethyl Cellulose." Polymers 16, no. 1 (December 26, 2023): 80. http://dx.doi.org/10.3390/polym16010080.

Full text
Abstract:
The mechanical properties for paper sheets composited with glucose (Glc), methyl cellulose (MC), and carboxymethyl cellulose (CMC) were investigated. The paper composites were prepared by immersing paper sheets in aqueous solutions of these materials and drying at 100 °C for 30 min. The stress–strain curves for these paper composites were measured by a uniaxial tensile apparatus with a stretching speed of 2 mm/min. The breaking stress and strain for untreated paper were 24 MPa and 0.016, respectively. The paper composites demonstrated stress–strain curves similar to the untreated paper; however, the breaking point largely differed for these composites. The breaking strain and breaking stress for the Glc composite slightly decreased and those for the MC composite gradually increased with the concentration of materials composited. Significant increases in the mechanical properties were observed for the CMC composite. The breaking stress, breaking strain, and breaking energy for the 3 wt.% CMC composite were 2.0-, 3.9-, and 8.0-fold higher than those for untreated paper, respectively. SEM photographs indicated that the CMC penetrated into the inner part of the paper. These results strongly suggest that the mechanical improvement for CMC composites can be understood as an enhancement of the bond strength between the paper fibrils by CMC, which acts as a bonding agent. It was also revealed that the breaking strain, breaking stress, and breaking energy for the CMC composites were at maximum at the first cycle and decreased gradually as the immersion cycles increased.
APA, Harvard, Vancouver, ISO, and other styles
4

Liang, Yun Xing, Li Chen, Hai Wen Liu, and Hua Wu Liu. "The Development of a High Elastic 3D Prefabricated Composite." Advanced Materials Research 332-334 (September 2011): 1773–76. http://dx.doi.org/10.4028/www.scientific.net/amr.332-334.1773.

Full text
Abstract:
With the development of modern technology, fiberglass composite materials are widely applied. The advantages of fiberglass reinforced composite materials are high strength and light weight. In order to produce a prefabricated fiberglass composite, a machine chart was drafted for weaving the 3D fiberglass fabric with five layers. The obtained five-layer 3D fabrics were composited with polyurethane matrix. Afterwards, the performance of the prefabricated composites was tested and the optimal ratio of fiberglass to matrix was determined by statistical analysis.
APA, Harvard, Vancouver, ISO, and other styles
5

a, Busoni, Moch Jonny Putra, Salim Ashar Hanafi, Riza Ummami, Bambang Piluharto, and Achmad Sjaifullah. "DOPANT, IMMERSION TIME EFFECT, AND HYDROLYSIS ONTO POLYANILINE/BACTERIAL- COMPOSITES: CONDUCTIVITY STUDIES." International Journal of Advanced Research 10, no. 09 (September 30, 2022): 853–62. http://dx.doi.org/10.21474/ijar01/15431.

Full text
Abstract:
The composite of conductive polyaniline was synthesized using the in situ chemical polymerization methods on cellulose to form PANI-cellulose composites. Polyaniline can be composited with a cellulose matrix (nata de coco) due to its abundance, low price, and environmental friendliness. Ammoniumperoxodisulfate (APS) was used as an initiator forthe oxidative polymerization of aniline. Characterization of PANI-Cellulose Bacterial composite was drawn using FT-IR and SEM, while the conductivity and electric quantities both using LCR-meter, FT-IR spectra, and SEM The PANI-cellulose bacterial composite with the various concentration dopant of H2SO4 methods has the highest conductivity than PANI-cellulose bacterial composite with the dopant of HCl methods.
APA, Harvard, Vancouver, ISO, and other styles
6

Kustiningsih, Indar, Fajariswaan Nurrahman, Hasby Ashyra Rinaldi, Ipah Ema Jumiati, Denni Kartika Sari, and Jayanudin Jayanudin. "Synthesize Fe<sub>3</sub>O<sub>4</sub>-TiO<sub>2 </sub>Composite for Methyl Orange Photocatalytic Degradation." Materials Science Forum 1057 (March 31, 2022): 129–35. http://dx.doi.org/10.4028/p-9q4ts9.

Full text
Abstract:
The effect of Fe3O4 percentage on Fe3O4-TiO2 composite for methyl orange photocatalytic degradation has been investigated. Hydrothermal was carried out on TiO2 before being combined with Fe3O4 by precipitation method. The composites were characterized by means of Scanning Electron Microscope (SEM), X-ray diffraction (XRD) and UV-Vis diffuse and reflectance spectroscopy (UV-Vis DRS). The photocatalytic activity of Fe3O4-TiO2 composites were evaluated for methyl orange degradation. The addition of Fe3O4 to TiO2 could reduce the bandgap energy. The lowest bandgap energy was obtained at 20% Fe3O4-TiO2 composite. By using this composited, the degradation of methyl orange was 90%.
APA, Harvard, Vancouver, ISO, and other styles
7

Arun, M., K. Ragupathy, T. Anand, and S. Vishvanathperumal. "Fabrication and Characterization of a Stir Casting-Based Aluminium Hybrid MMC Reinforced with SiC, TiC, and MoS2." MATEC Web of Conferences 393 (2024): 01007. http://dx.doi.org/10.1051/matecconf/202439301007.

Full text
Abstract:
The need for strong, lightweight materials has prompted the creation of innovative metal matrix composites based on aluminum. The properties of metal matrix composites that are uniformly dispersed with nanoparticles are much superior to those of monolithic alloy and microparticle-reinforced composites. The objective of this work was to create and evaluate a metal matrix composite reinforced with MoS2, SiC, and TiC that is a hybrid aluminum alloy, Al6061. It was also investigated how the weight percentages (3, 6, 9, and 12%) of MoS2, SiC, and TiC reinforcement affected the mechanical, morphological, tribological, and physical characteristics of the metal matrix composite. The addition of SiC and MoS2 increased the density of the reinforced Al6061 composite when compared to as-cast non-reinforced Al6061. It was found that the hybrid composite Al6061/12% SiC/4% MoS2 had the maximum density. The hybrid metal matrix composite's toughness increased as the proportion of TiC weight increased. The composite made of Al6061, 12% TiC, and 4% MoS2 had the maximum hardness, measuring 114.03 HV. The composite Al6061/12% TiC/4% MoS2 has the most ultimate tensile strength. The tribology analysis revealed that when applied stress increased from 10 to 50 N, mass loss increased dramatically. Because of the solid MoS2 lubricant and the development of the TiC layer at the contact zone, Double- and triple-reinforced specimens had less wear loss than non-reinforced specimens, as shown by the wear performance of hybrid composites. The main wear mechanisms of the composites were delamination wear and wear debris.
APA, Harvard, Vancouver, ISO, and other styles
8

Liu, Shih-Ming, Wen-Cheng Chen, Chia-Ling Ko, Hsu-Ting Chang, Ya-Shun Chen, Ssu-Meng Haung, Kai-Chi Chang, and Jian-Chih Chen. "In Vitro Evaluation of Calcium Phosphate Bone Cement Composite Hydrogel Beads of Cross-Linked Gelatin-Alginate with Gentamicin-Impregnated Porous Scaffold." Pharmaceuticals 14, no. 10 (September 29, 2021): 1000. http://dx.doi.org/10.3390/ph14101000.

Full text
Abstract:
Calcium phosphate bone cement (CPC) is in the form of a paste, and its special advantage is that it can repair small and complex bone defects. In the case of open wounds, tissue debridement is necessary before tissue repair and the subsequent control of wound infection; therefore, CPC composite hydrogel beads containing antibiotics provide an excellent option to fill bone defects and deliver antibiotics locally for a long period. In this study, CPC was composited with the millimeter-sized spherical beads of cross-linked gelatin–alginate hydrogels at the different ratios of 0 (control), 12.5, 25, and 50 vol.%. The hydrogel was impregnated with gentamicin and characterized before compositing with CPC. The physicochemical properties, gentamicin release, antibacterial activity, biocompatibility, and mineralization of the CPC/hydrogel composites were characterized. The compressive strength of the CPC/hydrogel composites gradually decreased as the hydrogel content increased, and the compressive strength of composites containing gentamicin had the largest decrease. The working time and setting time of each group can be adjusted to 8 and 16 min, respectively, using a hardening solution to make the composite suitable for clinical use. The release of gentamicin before the hydrogel beads was composited with CPC varied greatly with immersion time. However, a stable controlled release effect was obtained in the CPC/gentamicin-impregnated hydrogel composite. The 50 vol.% hydrogel/CPC composite had the best antibacterial effect and no cytotoxicity but had reduced cell mineralization. Therefore, the optimal hydrogel beads content can be 25 vol.% to obtain a CPC/gentamicin-impregnated hydrogel composite with adequate strength, antibacterial activity, and bio-reactivity. This CPC/hydrogel containing gentamicin is expected to be used in clinical surgery in the future to accelerate bone regeneration and prevent prosthesis infection after surgery.
APA, Harvard, Vancouver, ISO, and other styles
9

Saxena, Tanvi, and V. K. Chawla. "Elastic properties evaluation of banana-hemp fiber-based hybrid composite with nano-titanium oxide filler: Analytical and Simulation Study." Engineering Solid Mechanics 12, no. 1 (2024): 65–80. http://dx.doi.org/10.5267/j.esm.2023.7.001.

Full text
Abstract:
In recent years, nano-filler-based hybrid composites have gained significant attention from the research community; The nano-filler-based hybrid composites can have potential applications in numerous sectors. Nano-fillers are bringing a leading development in material science and natural fibers-based composites. The present study considers the impact of various weight percentages of nano-titanium oxide (NTiO2) fillers (2%, 4%, and 6%) on the elastic features of novel hybridized banana-hemp fiber-reinforced epoxy composites. The proposed composite is analyzed for its elastic properties like longitudinal and transverse elastic modulus, axial Poisson's ratio, and axial shear modulus using homogenized micromechanical models, namely, Mori-Tanaka (M-T) model, Generalized self-consistent (G-SC) model and Modified Halpin-Tsai (M-HTS) model. The composite is modeled using one layer of banana fiber, one layer of NTiO2 and epoxy, and one layer of hemp fiber. All three layers of the composite are arranged in the sequence of banana fiber at 450, a layer of NTiO2 and epoxy at 00, and hemp fiber at 450. The proposed composite's vector sum deformation and strength are examined by employing the ANSYS APDL application. The results obtained in this study are compared with the experimental work mentioned in the literature. The composite reinforced with six weight% NTiO2 has the highest mechanical strength, and the modified Halpin-Tsai (M-HTS) model is the most effective in calculating the elastic features of the proposed composite. In addition to the above, the hybridization effect for the proposed composite is also estimated to analyze the tensile failure strain of banana and hemp fiber in the proposed hybrid composite structure.
APA, Harvard, Vancouver, ISO, and other styles
10

Prakoso, Medhi Wiratama, Dina Nikmatul Baroroh, and Keagisitswe Setswalo. "Water Absorption Rate of Kenaf Fiber (KF)/ Hydroxiteapatite (HA) in Simulated Sea Water." Mechanics Exploration and Material Innovation 1, no. 1 (January 31, 2024): 35–41. http://dx.doi.org/10.21776/ub.memi.2024.001.01.5.

Full text
Abstract:
Hydroxiteapatie (HA) as a filler is a mixture that is often added to alloy or composite products. This study investigates the development of polyester composites reinforced with kenaf fiber (KF) and hydroxiteapatite (HA) fillers in order to reduce their environmental impact. The strength, decomposability, and low weight of these composites make them ideal for a wide range of applications due to their exceptional mechanical properties. In addition to tensile and bending tests, water absorption tests, and immersion in seawater simulations, the composites were evaluated under demanding conditions. The water absorption rate increased with increasing fiber volume percentages in the composite, primarily due to the water-absorbing properties of the KF and HA particles. In contrast, the KF-15%HA-reinforced composite, which underwent soaking at 50 °C, exhibited the lowest tensile strength of the three composites. Additionally, the temperature at which aging occurs influences the composite's ability to absorb water and its mechanical properties. A filler may improve the mechanical properties of composites made from kenaf fibers, and it can also affect moisture absorption, reducing moisture absorption and increasing adhesion.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Composite"

1

Thanomsilp, Chuleeporn. "Toughening composites for liquid composite moulding." Thesis, Queen Mary, University of London, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.390838.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Christen, Jean-Loup. "Acoustic transmission through composite shells with noise treatment : Modelling and sensitivity." Thesis, Lyon, 2016. http://www.theses.fr/2016LYSEC028.

Full text
Abstract:
La transmission acoustique de plaques et de coques est un problème présent dans de nombreuses industries, de l'automobile à l'aéronautique en passant par le génie civil. Il s'agit alors, en présence d'une source externe, de limiter le niveau de bruit à l'intérieur d'une cavité enclose par une structure vibrante, qu'il s'agisse d'une voiture, d'un avion ou d'un immeuble.Les matériaux composites sont de plus en plus largement utilisés par toutes les industries du transport, du fait de leur faible masse rapportée à leur grande rigidité. Ces caractéristiques, utiles pour réduire la consommation énergétique des véhicules, sont cependant un handicap lorsqu'il s'agit de limiter le niveau de bruit intérieur. Il est alors nécessaire d'ajouter des protections acoustiques. On s'intéresse dans ce travail à la transmission d'un bruit produit à l'extérieur de la cavité, et à des solutions antibruit passives, utilisant des matériaux poreux absorbants. Ceux-ci, mousses ou laines minérales, présentent en général de bonnes performances acoustiques pour des fréquences élevées, mais nettement mois intéressantes en basses fréquences. Ce travail s'inscrit dans le cadre d'un projet international ayant pour objectif d'étudier la réduction de bruit à travers des structures composites incluant des protections acoustiques passives. Deux axes y sont privilégiés, la modélisation et l'analyse de sensibilité. En effet, les matériaux poreux et composites présentent souvent de grandes incertitudes, dues au procédé de fabrication, à la difficulté de mesure, ou encore simplement à des choix de conception à faire. On cherche donc à s'assurer de la robustesse des solutions étudiées.Cette thèse est organisée en trois parties. La première traite de la modélisation des structures composites et des traitements poroélastiques. On s'intéresse surtout à deux types de structures, les plaques et les cylindres, pouvant dans les deux cas inclure un grand nombre de couches et de matériaux différents. La deuxième partie traite des méthodes d'analyse de sensibilité, et d'applications dans le cas de la transmission acoustique à travers des structures composites. On s'intéressera enfin dans la troisième partie à l'effet du traitement poroélastique, à travers des études numériques et expérimentales
Acoustic transmission through plates and shells is a problem that appear in many applications, for example in the automotive or aerospace industries, or in civil engineering. The idea is to reduce the noise level inside a caivty enclosed by a vibrating structure, which may be a car, a plane or a building. Composite materials are widely used in the transportation industries due to their light weight and high mechanic resistance, but these features tend to increase the acoustic transparency of the structures, thus making it necessary to add acoustic protections for reducing noise in the enclosed cavity. The most frequently used acoustic protections take the form of layers of poroelastic materials, which are very efficient noise absorbers in high frequencies, but perform less efficiently in lower frequency ranges.This thesis is part of an international project aimed at improving the noise reduction performance of composite structures through passive sound packages. This implies the development of reduced models of acoustic transmission through such structures, and optimization studies on these models. Besides, the robustness of a solution with respect to uncertainties in the model have to be ensured. This thesis is organised in three parts, dealing with numerical modelling, sensitivity analysis for acoustic transmission and the effect of a porous treatment on sound transmission
APA, Harvard, Vancouver, ISO, and other styles
3

Podnos, Eugene Grigorievich. "Application of fictitious domain method to analysis of composite materials /." Digital version accessible at:, 1999. http://wwwlib.umi.com/cr/utexas/main.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Palmer, Nathan Reed. "Smart Composites evaluation of embedded sensors in composite materials /." Thesis, Montana State University, 2009. http://etd.lib.montana.edu/etd/2009/palmer/PalmerN0809.pdf.

Full text
Abstract:
As an emerging form of renewable energy, horizontal wind turbines have experienced advancements in improving efficiency and reliability. These advances have pushed the limits of current technology used in wind turbines. Smart blades have been proposed as a method of addressing these limitations. Sensor integration within blade construction is the first step in development of smart blades. Thus, several low cost sensors were chosen, 1 axis strain gages, polyvinylidene fluoride films (PVDF), and single mode fiber optics either coated in acrylate or polyimide. To ensure successful bonding between sensor and composite two surface treatment techniques were developed. The first, dipping of the sensor into a bath of 20% by weight solution of nitric acid and the second was submersion of the sensor in the nitric acid for ten seconds prior to removal. These treatments were compared against sensors not surface treated prior to embedding. These sensors were embedded within samples created of fiberglass and epoxy or vinyl ester resin. Two different material tests were conducted. Tensile testing allowed for evaluation of sensor sensitivity, sensor failure point, material tensile modulus, and material tensile strength. Mode I fracture toughness evaluation, indicated the level of successful bonding which occurred during resin curing. Field Emission Scanning Electron Microscopy (FESEM) was conducted to further confirm the level of bonding between resin and sensor, post fracture. Results for embedded strain gages showed an adverse effect for vinyl ester samples. Epoxy samples fared better, thus concluding manufacturing success for epoxy samples, submersion being preferred, and alternative methods needed for vinyl ester samples. PVDF films had good qualitative FESEM images combined with increasing trends. It was concluded that integration for both resin groups with sensors submerged in nitric acid was successful. Fiber optics coated in acrylate also showed good bonding under FESEM imaging as well as testing. It was thus concluded that submersion was the preferred treatment. Lastly, fiber optics coated in polyimide embedded in vinyl ester composites showed significant drawbacks and it was concluded that alternative methods need exploration. Those embedded in epoxy were successfully integrated and submersion in nitric acid showed the most potential.
APA, Harvard, Vancouver, ISO, and other styles
5

Zhang, Fangzhou. "Multiscale modeling of laminated composites under extreme environmental conditions." Thesis, Cachan, Ecole normale supérieure, 2014. http://www.theses.fr/2014DENS0027/document.

Full text
Abstract:
À haute température, l'oxygène réagit avec la matrice organique du matériau composite, ce qui change les propriétés du matériau et réduit la résistance à la rupture globale. Mais la compréhension de la dégradation du composite stratifié oxydé, en particulier son comportement à l'échelle du pli, est aujourd'hui limitée et phénoménologique. Les travaux dans cette thèse ont été réalisés pour donner notre contribution sur les aspects méthodologiques de ce sujet. Des essais sont réalisés pour caractériser expérimentalement le comportement d'éprouvette oxydée : en particulier, un nouveau essai, l'essai 'oxy-délaminage', a été développé pour identifier la ténacité du matériau composite vieilli. Une stratégie a été proposée d'étudier le problème à partir des propriétés de la matrice oxydée à l'échelle fibre/matrice et jusqu'à la reproduction et la prédiction du comportement de fissuration transversale des échantillons oxydés à échelle méso via un procédé d'homogénéisation
At high temperature, the oxygen reacts with the organic matrix of composite material, which changes the material properties and reduces the resistance to global failure. But understanding on the degradation of the oxidized composite laminate, particularly its damage behavior, is now limited and phenomenological. Work in this thesis has been made to give our contribution to the methodological aspects of this topic. Tests are performed to characterize experimentally the behaviors of the oxidized specimens: in particular, a new test test oxy-delamination ', was developed to identify the tenacity of composite material aged. A strategy has been proposed to study the problem from the properties the oxidized matrix at the fiber/matrix scale up to the reproduction and predicting the behavior of transverse cracking of the sample at the scale of a ply via a homogenization process
APA, Harvard, Vancouver, ISO, and other styles
6

Do, Nascimento Oliveira Jose Emidio. "Deformation and damage analysis of composite beams equipped with polyvinylidene fluoride film sensors /." [S.l. : s.n.], 2008. http://dk.cput.ac.za/cgi/viewcontent.cgi?article=1001&context=td_cput.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Yang, Heechun. "Modeling the processing science of thermoplastic composite tow prepreg materials." Diss., Georgia Institute of Technology, 1992. http://hdl.handle.net/1853/17217.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Somanath, Nagendra. "A finite element cure model and cure cycle optimization for composite structures." Thesis, This resource online, 1987. http://scholar.lib.vt.edu/theses/available/etd-04272010-020304/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Call, Russell Kent. "Parameter establishment and verification of a fabrication stress model and a thermo-kinetic cure model for filament wound structures." Thesis, This resource online, 1991. http://scholar.lib.vt.edu/theses/available/etd-08142009-040256/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Klug, Jeremy Hager. "High-performance adhesive systems for polymer composite bonding applications /." Thesis, Connect to this title online; UW restricted, 1999. http://hdl.handle.net/1773/9883.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Composite"

1

(Firm), Knovel, ed. Composite materials handbook: Metal matrix composites. [Washington, D.C.?]: U.S. Department of Defense, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

National Institute for Aviation Research (U.S.), ed. Composite materials handbook. [Warrendale, Pa.]: SAE International on behalf of CMH-17, a division of Wichita State University, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Materials Technology Conference (7th 1991 Carbondale, Ill.). Composite technology. Carbondale, Ill: The Center, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Sultan, Mohamed Thariq Hameed, S. Arulvel, and K. Jayakrishna. Composite and Composite Coatings. New York: CRC Press, 2022. http://dx.doi.org/10.1201/9781003109723.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

1942-, Osamura Kōzō, ed. Composite superconductors. New York: M. Dekker, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Talreja, R. Fatigue of composite materials. Lancaster: Technomic Publishing, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Talreja, Ramesh. Fatigue of composite materials. Lyngby, Denmark: Technical University of Denmark, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Jordan, Baseman, and Arnolfini Gallery, eds. Composite. Bristol: Arnolfini Gallery, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kempenaers, Jan. Composite. Amsterdam, Netherlands: Roma Publications, 2016.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Gatenby, Ian. Composite and quasi-composite hereditaments. London: Estates Gazette Ltd, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Composite"

1

Gooch, Jan W. "Composite." In Encyclopedic Dictionary of Polymers, 161. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_2743.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Nesteruk, Dmitri. "Composite." In Design Patterns in .NET Core 3, 133–42. Berkeley, CA: Apress, 2020. http://dx.doi.org/10.1007/978-1-4842-6180-4_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Nesteruk, Dmitri. "Composite." In Design Patterns in Modern C++, 107–18. Berkeley, CA: Apress, 2018. http://dx.doi.org/10.1007/978-1-4842-3603-1_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Chung, Carlo. "Composite." In Pro Objective-C Design Patterns for iOS, 185–99. Berkeley, CA: Apress, 2011. http://dx.doi.org/10.1007/978-1-4302-3331-2_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Tadros, Tharwat. "Composite." In Encyclopedia of Colloid and Interface Science, 145. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-20665-8_52.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Dockins, Kelt. "Composite." In Design Patterns in PHP and Laravel, 71–76. Berkeley, CA: Apress, 2016. http://dx.doi.org/10.1007/978-1-4842-2451-9_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Nesteruk, Dmitri. "Composite." In Design Patterns in .NET, 131–40. Berkeley, CA: Apress, 2019. http://dx.doi.org/10.1007/978-1-4842-4366-4_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Nesteruk, Dmitri. "Composite." In Design Patterns in .NET 6, 167–78. Berkeley, CA: Apress, 2022. http://dx.doi.org/10.1007/978-1-4842-8245-8_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Nesteruk, Dmitri. "Composite." In Design Patterns in Modern C++20, 143–61. Berkeley, CA: Apress, 2021. http://dx.doi.org/10.1007/978-1-4842-7295-4_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Musch, Olaf. "Composite." In Design Patterns mit Java, 143–59. Wiesbaden: Springer Fachmedien Wiesbaden, 2021. http://dx.doi.org/10.1007/978-3-658-35492-3_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Composite"

1

Margraf, Jr., Thomas W., Thomas J. Barnell, Ernie Havens, and Christopher D. Hemmelgarn. "Reflexive composites: self-healing composite structures." In The 15th International Symposium on: Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, edited by Masayoshi Tomizuka. SPIE, 2008. http://dx.doi.org/10.1117/12.776284.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

FENG, HAOTIAN, SSABARINATHAN P. SUBRAMANIYAN, and PAVANA PRABHAKAR. "DEEP LEARNING FRAMEWORK FOR WOVEN COMPOSITE DESIGN AND OPTIMIZATION." In Proceedings for the American Society for Composites-Thirty Seventh Technical Conference. Destech Publications, Inc., 2022. http://dx.doi.org/10.12783/asc37/36415.

Full text
Abstract:
Woven composites are produced by interlacing warp and weft fibers in a pattern or weave style. By changing the pattern or material, the mechanical properties of woven composites can be significantly changed. However, how a woven composite’s architecture (pattern, material) is related to its mechanical properties is still unclear. Thus, in this paper, we utilize Deep Neural Network to explore the relationship between 2D woven composite architectures and their corresponding mechanical properties. We propose Deep Convolutional Neural Network to predict in-plane modulus from a given weave pattern and material sequence. More importantly, we propose a Physics-Constrained Neural Network to predict woven composite architecture from in-plane modulus, which is an extremely complex problem. The results demonstrate that our proposed Deep Neural Network frameworks can effectively represent the relationships between woven composite architecture and corresponding in-plane modulus with much higher accuracy compared to existing frameworks. We anticipate our proposed frameworks will not only facilitate woven composite analysis and optimization process but also be a starting point to introduce Physics knowledge guided Neural Networks into woven composite analysis.
APA, Harvard, Vancouver, ISO, and other styles
3

Dinesh, A. "Development of Self-Sensing Cement Composite Using Nanomaterials for Structural Health Monitoring of Concrete Columns – A Comprehensive Review." In Sustainable Materials and Smart Practices. Materials Research Forum LLC, 2022. http://dx.doi.org/10.21741/9781644901953-23.

Full text
Abstract:
Abstract. Due to age, structural deterioration, and other factors, concrete constructions such as beams and columns will inevitably deteriorate. The growth of nanomaterials and recent advances in multidisciplinary research has broadened cement composites' applicability in various fields. A self-sensing cement composite can detect its own deformation, strain, and stress by changing its electrical characteristics, which may be measured with electrical resistivity. Carbon-based nanomaterials, such as carbon fiber, carbon black, and carbon nanotube, have a strong potential to increase cement composite's mechanical (strength) and electrical (resistivity, sensitivity) potentials due to their remarkable strength and conductivity. Due to the artificial integration of conductive carbon-based components will generate piezoresistive properties in typical cement composites, transforming them into self-sensing cement composites. As a result, the review focuses primarily on the development of nanoparticle-based self-sensing cement composites and their use in the health monitoring of structural columns. This research critically examines the materials used, fabrication techniques, strength, and sensing methodologies used to develop the self-sensing cement composite. The difficulties of commercializing self-sensing cement composites, as well as potential solutions, are also highlighted. According to the review, the difference in Poisson ratio and youngs modulus between the self-sensing cement composite and columns leads the self-sensing cement composite to have different strength and conductivity before and after embedding in columns. According to the study, the addition of conductive material diminishes the composite's workability due to its large specific surface area. Because of the well-distributed conductive network, the composite's resistivity is significantly lowered. The study also shows that the inclusion of a self-sensing cement composite has no bearing capacity influence on the column. Finally, according to the review, the self-sensing cement composite has the ability to monitor the health of structural columns.
APA, Harvard, Vancouver, ISO, and other styles
4

Singh, Ram, and R. N. Rai. "Characterization of B4C-composite-reinforced aluminum alloy composites." In ADVANCES IN MECHANICAL DESIGN, MATERIALS AND MANUFACTURE: Proceedings of the First International Conference on Design, Materials and Manufacture (ICDEM 2018). Author(s), 2018. http://dx.doi.org/10.1063/1.5029649.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Razavi Setvati, Mahdi, Zahiraniza Mustaffa, Nasir Shafiq, and Zubair Imam Syed. "A Review on Composite Materials for Offshore Structures." In ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/omae2014-23542.

Full text
Abstract:
Research into advanced composite materials for offshore structures is growing due to factors such as new challenges in extreme environments, contaminated contexts (chemical, biological) and increasing awareness of earthquake risks. Advances in theory and practice of composites technology have modified the general perception of offshore structures. This paper provided an introduction to composite material and reviewed the application of composites in offshore structures. This survey focused on (1) composites, especially FRP, for repairing offshore structures and also (2) fire protection of composites in offshore structures. Various national and international research projects on uses of composites for marine structures either ongoing or completed during last decades summarized. Future environmental issues considered and eco-friendly sustainable composite suggested and forecasted for new generation of offshore structures.
APA, Harvard, Vancouver, ISO, and other styles
6

Chamis, Christos C. "Aerospace Composite Structures: Applications/Design/Analysis." In ASME 1998 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/imece1998-0386.

Full text
Abstract:
Abstract Fiber composites are an emerging material with tailoring potential to achieve substantially “better-cheaper-faster” and even “greener” products. The lecture provides an overview on the advantages of composites design/analysis methods and applications. The review will synoptically cover analysis methods that span all composites scales from constituents (fiber, matrix) and fabrication process to structural optimization. Several typical composites applications to aerospace structures are presented to demonstrate specific advantages of composites in these structures. Recent application to space station, advanced satellites and X-33 are included as are potential applications of smart composite structural concepts for aerospace applications. Emerging simulation methods to evaluate the reliability and risk of aerospace composite structures are summarized. The presentation provides a broad perspective of what can be done with composites and the state of the composites technology readiness to meet even greater application challenges in aerospace structures.
APA, Harvard, Vancouver, ISO, and other styles
7

ENAB, WALAA, STEVEN KEY, and PHILIP BRADFORD. "EFFECTIVE TRANSVERSE REINFORCEMENT OF UNIDIRECTIONAL THIN PREPREG COMPOSITES USING VERTICALLY ALIGNED CARBON NANOTUBES." In Proceedings for the American Society for Composites-Thirty Seventh Technical Conference. Destech Publications, Inc., 2022. http://dx.doi.org/10.12783/asc37/36379.

Full text
Abstract:
In this paper, we investigate the use of vertically aligned carbon nano tubes (VACNTs) in laminated composites across nearby plies for developing advanced composites to improve the transverse mechanical properties of the composite. VACNTs introduced into the interlaminar area by manually printing aligned carbon nanotubes onto the surface of the composite prepreg plies. The transverse tensile test is utilized to determine the improvement in transverse mechanical properties. The results shows that the transverse tensile improved by 31.6 %. This approach demonstrates extremely promising outcomes in terms of improving the composite's transverse strength.
APA, Harvard, Vancouver, ISO, and other styles
8

Klocke, Philip, Mitchel Skinner, Andy George, and Spencer Magleby. "Selectively Stiffened Integrated Composite Hinge." In ASME 2023 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2023. http://dx.doi.org/10.1115/detc2023-116367.

Full text
Abstract:
Abstract Fiber-reinforced composites have potential advantages for manufacturing origami arrays. However, methods for manufacturing large origami arrays using composite materials are complex, time-consuming, and expensive. This research proposes two processes for synthesizing origami-based arrays, each made using fiber-reinforced composites and requiring only a single layup. The overarching principle used in these processes is to selectively modify the stiffness in the composite array, thus forming both the panels and hinge lines of an origami array. The feasibility of using these processes to produce deployable carbon fiber arrays is then demonstrated.
APA, Harvard, Vancouver, ISO, and other styles
9

Quadrini, Fabrizio, Giovanni Matteo Tedde, and Loredana Santo. "Shape Memory Composite Hands for Space Applications." In ASME 2015 International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/msec2015-9289.

Full text
Abstract:
Shape memory composites combine structural properties of continuous-fiber polymer-matrix composites with functional behavior of shape memory polymers. In this study, the production of shape memory composite structures for aerospace applications is described. Small-scale grabbing systems were prototyped as they could be used for space cleaning operations. Composite hands were manufactured by using two carbon fiber composite layers with a shape memory polymer interlayer. They were produced in the closed-hand configuration and subsequently opened in the memorizing step. Due to heating, composites tended to recover the initial closed configuration, allowing to grab small objects. Two different shapes (cylindrical and cubic) were considered for composite hands. In the first case, the shape memory behavior was given to the entire structure whereas, in the second case, shape memory properties were provided only to folding zones. As a result, a good shape recovery was observed in both cases but part weight was already not negligible also in these small-scale systems.
APA, Harvard, Vancouver, ISO, and other styles
10

Ray, Projjol, Rainer Laupers, and Gerd Ascheid. "COMPOSE: A composite embedded software synthesis approach." In 2015 11th International Conference on Innovations in Information Technology (IIT). IEEE, 2015. http://dx.doi.org/10.1109/innovations.2015.7381510.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Composite"

1

McCullough, Roy L., and Diane S. Kukich. Composites 2000: An International Symposium on Composite Materials. Fort Belvoir, VA: Defense Technical Information Center, June 2000. http://dx.doi.org/10.21236/ada384778.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lee, Max. Composite Materials. Fort Belvoir, VA: Defense Technical Information Center, September 1996. http://dx.doi.org/10.21236/ada316048.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Boerma, Job, Aleh Tsyvinski, Ruodu Wang, and Zhenyuan Zhang. Composite Sorting. Cambridge, MA: National Bureau of Economic Research, September 2023. http://dx.doi.org/10.3386/w31656.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hanson, Alexander. Revisiting Multi-Material Composite Structures with Homogenized Composite Properties. Office of Scientific and Technical Information (OSTI), January 2022. http://dx.doi.org/10.2172/1842578.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Barnes, Eftihia, Jennifer Jefcoat, Erik Alberts, Hannah Peel, L. Mimum, J, Buchanan, Xin Guan, et al. Synthesis and characterization of biological nanomaterial/poly(vinylidene fluoride) composites. Engineer Research and Development Center (U.S.), September 2021. http://dx.doi.org/10.21079/11681/42132.

Full text
Abstract:
The properties of composite materials are strongly influenced by both the physical and chemical properties of their individual constituents, as well as the interactions between them. For nanocomposites, the incorporation of nano-sized dopants inside a host material matrix can lead to significant improvements in mechanical strength, toughness, thermal or electrical conductivity, etc. In this work, the effect of cellulose nanofibrils on the structure and mechanical properties of cellulose nanofibril poly(vinylidene fluoride) (PVDF) composite films was investigated. Cellulose is one of the most abundant organic polymers with superior mechanical properties and readily functionalized surfaces. Under the current processing conditions, cellulose nanofibrils, as-received and 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO) oxidized, alter the crystallinity and mechanical properties of the composite films while not inducing a crystalline phase transformation on the 𝛾 phase PVDF composites. Composite films obtained from hydrated cellulose nanofibrils remain in a majority 𝛾 phase, but also exhibit a small, yet detectable fraction of 𝛼 and ß PVDF phases.
APA, Harvard, Vancouver, ISO, and other styles
6

Frame, B. J., C. J. Janke, W. A. Simpson, Jr., R. E. Ziegler, and H. E. Philpot. Composite heat damage. Office of Scientific and Technical Information (OSTI), May 1990. http://dx.doi.org/10.2172/6949632.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kumar, Ashok V. Multifunctional Composite Structures. Fort Belvoir, VA: Defense Technical Information Center, March 2010. http://dx.doi.org/10.21236/ada521792.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Whitehead, David, and Brian Wilson. Composite Boss Technology. Fort Belvoir, VA: Defense Technical Information Center, May 1998. http://dx.doi.org/10.21236/ada350976.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Marx, Egon. The composite proton. Gaithersburg, MD: National Bureau of Standards, 1986. http://dx.doi.org/10.6028/nbs.ir.86-3370.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Johnson, Carl, Shu Sing Chang, and Donald Hunston. Polymer Composite Processing:. Gaithersburg, MD: National Institute of Standards and Technology, 1990. http://dx.doi.org/10.6028/nist.ir.4461.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Composite' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography