Academic literature on the topic 'Combustible solide'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Combustible solide.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Combustible solide":
De Soete, G. G. "Ignition et oxydation des particules de combustible solide pulvérisé." Revue de l'Institut Français du Pétrole 40, no. 5 (September 1985): 649–70. http://dx.doi.org/10.2516/ogst:1985041.
Amrouche, Fethia, Bouziane Mahmah, Maiouf Belhamel, and Hocine Benmoussa. "Modélisation d’une pile à combustible PEMFC alimentée directement en hydrogène-oxygène et validation expérimentale." Journal of Renewable Energies 8, no. 2 (December 31, 2005): 109–21. http://dx.doi.org/10.54966/jreen.v8i2.856.
Hong, Ter-Ki, Dong-Pyo Seo, and Seul-Hyun Park. "Experimental Study on the Effect of Flow around Solid Combustibles and Thermal Thickness on Heat Release Rate Characteristics." Fire Science and Engineering 34, no. 3 (June 30, 2020): 28–34. http://dx.doi.org/10.7731/kifse.c4fb1b16.
Abylkhani, Bexultan, Berik Aiymbetov, Almira Yagofarova, Diyar Tokmurzin, Christos Venetis, Stavros Poulopoulos, Yerbol Sarbassov, and Vassilis J. Inglezakis. "Seasonal characterisation of municipal solid waste from Astana city, Kazakhstan: Composition and thermal properties of combustible fraction." Waste Management & Research 37, no. 12 (October 11, 2019): 1271–81. http://dx.doi.org/10.1177/0734242x19875503.
Fangrat, J. "Combustability of building products versus fire safety." Bulletin of the Polish Academy of Sciences Technical Sciences 64, no. 4 (December 1, 2016): 709–17. http://dx.doi.org/10.1515/bpasts-2016-0080.
Nam, Dong-Gun, Ter-Ki Hong, Myung-Ho Ryu, and Seul-Hyun Park. "Characteristics of Heat Release Rate Predictions of Fire by a Fire Dynamics Simulator for Solid Combustible Materials." Fire Science and Engineering 34, no. 4 (August 31, 2020): 22–28. http://dx.doi.org/10.7731/kifse.7c07b15d.
Liu, Liu, Yu-Shi Wen, Dan Wang, Hong Yang, Xiao-Gan Dai, Chang-Gen Feng, Qiang Gan, and Yang Zhou. "A new high-irradiation ignition test and diagnosis method of solid combustibles." Thermal Science, no. 00 (2023): 95. http://dx.doi.org/10.2298/tsci230116095l.
Yin, Qiang, and Shiguang Liu. "Sounding Solid Combustibles: Non-Premixed Flame Sound Synthesis for Different Solid Combustibles." IEEE Transactions on Visualization and Computer Graphics 24, no. 2 (February 1, 2018): 1179–89. http://dx.doi.org/10.1109/tvcg.2016.2642958.
Lautenberger, Chris, and Carlos Fernandez-Pello. "Generalized pyrolysis model for combustible solids." Fire Safety Journal 44, no. 6 (August 2009): 819–39. http://dx.doi.org/10.1016/j.firesaf.2009.03.011.
Buah, W. K., and P. T. Williams. "Combustible Gaseous Products from Pyrolysis of Combustible Fractions of Municipal Solid Waste." Journal of Solid Waste Technology and Management 42, no. 3 (August 1, 2016): 191–96. http://dx.doi.org/10.5276/jswtm.2016.191.
Dissertations / Theses on the topic "Combustible solide":
Mountadir, Soukaina. "Élaboration d'une pile à combustible à oxyde solide basse température à électrolyte bicouche." Electronic Thesis or Diss., Centrale Lille Institut, 2023. http://www.theses.fr/2023CLIL0019.
The conduction properties of yttrium-stabilized zirconia (YSZ) require operating temperatures of 700°C or higher for solid oxide fuel cells (SOFC). Very good performances were reported in the literature on bilayer electrolyte cells based on gadolinium-doped ceria (GDC) and bismuth oxide partially substituted with erbium. In this study, we considered this concept in order to develop a full cell. First, the conditions for the deposition of a thin layer (< 5 µm) of bismuth oxide of Er0.5Bi1.5O3 composition (ESB) on a dense substrate of (GDC) were optimised. Spin coating was chosen as the deposition technique. The composition of an ethanol-based ink was optimised and allowed to obtain dense layers, without crack, with a controlled thickness of a few microns. A La0.6Sr0.4MnO3/ Er0.5Bi1.5O3 (La0.6/ESB) composite was selected as cathode material. After optimisation of its deposition conditions by screen printing and characterisation by impedance spectroscopy on symmetrical cells made of an ESB electrolyte, full cells were prepared by deposition of a dense layer of ESB on half-cells supported by an anode with GDC as electrolyte, on the one hand, and an anode with YSZ as electrolyte, on the other hand. While the fragility of the ceria-based cells did not allow their performance to be measured, the study confirmed increased performances for the Ni-YSZ|YSZ|ESB|ESB-La0.6|La0.6 cell compared to the same cell without ESB layer
Roussel, Denis. "Optimisation d’architecture d’électrode poreuse pour pile à combustible à oxyde solide." Thesis, Université Grenoble Alpes (ComUE), 2015. http://www.theses.fr/2015GREAI019/document.
This project is involved in the development of new green power sources. Solid Oxide Fuel Cells (SOFCs) can achieve an output power of 1kW to 2MW and an energy conversion of up to 70%. Temperatures between 700 and 1000°C are required. A typical cell is made of an electrolyte sandwiched between two porous electrodes (anode and cathode). Porous electrodes are elaborated from ceramic powders and are critical components of the whole structure. These electrodes need to be porous enough to optimize gaz diffusion and electrochemical reactions. This requirement is antagonist to the need of a good mechanical strength. This conflict could be solved using hierarchical or anisotropic electrode microstructures. The aim of this thesis is to investigate possible ways to optimize an electrode. Numerical simulations and nanotomography characterizations are used for this purpose. Electrodes are elaborated using two different protocoles leading to anisotropic and isotropic porosities. Anisotropic samples are prepared by freeze-casting from a slurry of YSZ and LSM, which are typical materials for SOFCs. Freze-casting leads to a hierarchical porosity. The overall porosity is controlled by the loading of the slurry. The microporosity decreases with sintering temperature and the macropore size is function of the freezing rate. Isotropic samples are processed using pore formers. The size and the amount of pore formers are selected to match the characteristics of the anisotropic samples. These electrodes are characterized with Archimedes technique to determine the porosity, and with scanning electron microscope (SEM) to obtain the size of macropores. Three dimensional images of the microstructures are captured using focused ion beam (FIB-SEM tomography) technique (10nm} resolution) and using X-ray nanotomography (75nm} resolution). The overpotentials in an electrode depend on different parameters: composition of YSZ/LSM, porosity, particle sizes, electronic/ionic conductivities and electrochemical resistance. These parameters are studied on numerical microstructures coupled with a resistor network. These numerical microstructures have been generated at th scale of particles, using a numerical code based on the discrete element method (DEM). Simulations can be used to determine the limiting factor on the effective conductivity. For example, we show that the composition of YSZ/LSM in a sample matters little for electrodes below a certain thickness. A new method has also been developed to compute the effective conductivity from a FIB-SEM image taking into account the electrochemical resistance at the triple point boundaries between gaz, YSZ and LSM. The mechanical response of the elaborated microstructures are tested in compression up to the fracture. In parallel, DEM simulations are performed to simulate mechanical properties based on 3D images. The mechanical behaviours of homogeneous samples (with pore formers) and anisotropic samples are compared. The yield strength and stiffness are overestimated by simulations. Qualitatively, experimental results and simulations show consistent failure mecanisms. Moreover, the yield strength and stiffness are different in the two types of sample (anisotropic and isotropic). Such an anisotropy could be used to optimize mechanical properties in one direction
Rosini, Sébastien. "Capteur potentiométrique tout solide pour le dosage de l'hydrogène dans l'air." Grenoble INPG, 2003. http://www.theses.fr/2003INPG0028.
Novel-Cattin, Frédéric. "Élaboration et étude de pile à combustible selon la technologie électrolyte polymère solide." Grenoble 1, 1990. http://www.theses.fr/1990GRE10115.
Dessertenne, Estelle. "Matériaux solide conducteur thermodurcissable : Application aux plaques bipolaires pour pile à combustible." Phd thesis, INSA de Lyon, 2012. http://tel.archives-ouvertes.fr/tel-00808869.
Princivalle, Agnès. "Nouvelle électrode à gradients pour piles à combustible à oxyde électrolyte solide." Grenoble INPG, 2006. http://www.theses.fr/2006INPG0142.
The objective of this thesis is related ta the synthesis and the structural, morphological and electrochemical characterization of cathodes to be used in the domain of solid oxide fuel cells (SOFC) operating at temperature ta 700°C ta ensure its industrialization. We have chosen ta carry out a composite cathode with continuous graded of porosity and composition, starting From typical materials: such as yttria-stabilized zirconia (YSZ) and lanthanum strontium manganite (LSM). The purpose of the addition o. F YSZ is to improve adhesion with the electrolyte (YSZ) and ta enlarge the triple contact area, where the gas, the electrocle and the electrolyte are in contact. For that, we have developed a new technique of synthesis, unique in France, the electrostatic spray deposition and undertook an original study of optimization of the microstructure of these new cathodes
Deseure, Jonathan. "Modélisation de cathodes de piles à combustible à oxyde électrolyte solide (SOFC)." Grenoble INPG, 2003. http://www.theses.fr/2003INPG0081.
Mosdale, Renaut. "Etude et développement d'une pile à combustible hydrogène/oxygène en technologie électrolyte polymère solide." Grenoble INPG, 1992. http://www.theses.fr/1992INPG0116.
Ciria, matamoros Desirée. "Propriétés thermo-mécaniques des matériaux pour les piles à combustible." Thesis, Université Paris-Saclay (ComUE), 2017. http://www.theses.fr/2017SACLC064/document.
Solid oxide fuel cells (SOFCs) offer a real alternative to classical technologies for the generation of electricity by clean, efficient and environmental-friendly means. Nevertheless, the main limitation of SOFCs lies in their unsatisfactory durability and reliability due to the high operating temperatures and thermal cycling characteristic of these devices. An intense search is currently underway for materials for SOFCs with the objective of lowering the working temperature and then overcoming these limitations. Among the different candidates which have emerged, Lanthanum Silicate (LSO) and Yttrium-doped Barium Zirconate (BZY) were considered as potential alternatives to be used as electrolyte materials for SOFC at intermediate-temperature. While numerous studies have been devoted to characterizing and optimizing the microstructural and electro-chemical properties of SOFC components, as yet there is little research available on mechanical properties and the influence they have on SOFC lifespan.The reliability and durability of these devices depends not only on their electro-chemical stability, but also on the ability of their structure to withstand residual stresses arising from the cell manufacturing process and mechanical stresses from operation. Owing to the fact that SOFCs are composed by stacking of several single cells which in turn are made up of individual brittle layers in close contact, these stresses mainly originate from the difference between the coefficient of thermal expansion and elastic properties of adjacent layers and creep deformation. Mismatched stresses can result in the mechanical failure of a single cell and have dramatic consequences on the whole stack. Therefore, knowledge of mechanical properties of the cell components becomes an important issue for the mechanical integrity and development of SOFCs.The aim of this PhD thesis is the fabrication and structural, microstructural and mechanical characterization of LSO and BZY
Couture, Guillaume. "Nouveaux copolymères fluorés pour membranes de pile à combustible alcaline à coeur solide." Thesis, Montpellier, Ecole nationale supérieure de chimie, 2013. http://www.theses.fr/2013ENCM0005/document.
The synthesis of polymeric membranes for solid alkaline fuel cells is the main topic of this work. These membranes have to exhibit several properties such as: a high hydroxide ion conductivity, a high thermal stability, a good chemical resistance especially to Hofmann degradation, a water-insolubility and mechanical properties suitable for the preparation of a membrane-electrode assembly. To fulfill these requirements, the use of alternated copolymers based on chlorotrifluoroethylene and vinyl ethers (poly(CTFE-alt-VE)) bearing quaternary ammonium groups has been considered. First, various functional or functionalizable vinyl ethers have been synthesized by palladium-catalyzed transetherification with a conversion rate higher than 80%. These monomers have been successfully copolymerized with CTFE and the good alternation of these monomers has been evidenced by elemental analysis and NMR spectroscopy. Furthermore, their physical, chemical and thermal properties have been studied by several techniques. Various functionalization steps have been carried out, yielding original poly(CTFE-alt-VE) copolymers bearing quaternary ammonium groups non sensitive to Hofmann degradation and with high thermal stabilities suitable for fuel cells. To improve the mechanical properties of these materials, terpolymers containing an increasing amount of 1H,1H,2H,2H-perfluorodecyl vinyl ether have been synthesized. Such terpolymers exhibited higher molecular weights, lower glass transition temperatures, and improved film-forming properties compared to the equivalent copolymers
Books on the topic "Combustible solide":
Keith, Jason M. Mole balances on solid oxide fuel cells using natural gas as a fuel. [Norwich, N.Y.]: Knovel, 2012.
Zhou, Hui. Combustible Solid Waste Thermochemical Conversion. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-3827-3.
Serebryakov, Andrey, Tat'yana Smirnova, Valentina Mercheva, and Elena Soboleva. Chemistry of combustible minerals. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1041945.
Ogden, Joan M. Solar hydrogen: Moving beyond fossil fuels. Washington, DC: World Resources Institute, 1989.
Souza-Santos, Marcio L. de. Solid fuels combustion and gasification: Modeling, simulation, and equipment operations. 2nd ed. Boca Raton: Taylor & Francis, 2010.
Albanese, Jimmy Alexander Faria, and M. Pilar Ruiz. Solid waste as a renewable resource: Methodologies. Toronto: Apple Academic Press, 2016.
D, Roy G., ed. Advances in chemical propulsion: Science to technology. Boca Raton, FL: CRC Press, 2002.
Tillman, David A. Solid fuel blending: Principles, practices, and problems. Oxford: Elsevier, Butterworth-Heinemann, 2012.
Fokin, Sergey. Improvement of technical means for processing waste from logging operations for fuel chips in felling conditions. ru: INFRA-M Academic Publishing LLC., 2017. http://dx.doi.org/10.12737/24135.
Marcio Luiz de Souza-Santos. Solid fuels combustion and gasification: Modeling, simulation, and equipment operation. New York: Marcel Dekker, 2004.
Book chapters on the topic "Combustible solide":
Fernandez-Anez, Nieves, Blanca Castells Somoza, Isabel Amez Arenillas, and Javier Garcia-Torrent. "Solid Fuels: Fossil and Renewable Combustible Products." In SpringerBriefs in Energy, 3–6. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-43933-0_1.
Ramamurthi, K. "Ignition Sources for Fire and Explosions in Solid Combustibles." In Ignition Sources, 67–93. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-20687-0_7.
Veyssiere, B., and B. A. Khasainov. "Non-ideal detonation in combustible gaseous mixtures with reactive solid particles." In Dynamic Structure of Detonation in Gaseous and Dispersed Media, 255–66. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3548-1_9.
Watanabe, Yukito, Akihiko Ito, and Hiroyuki Torikai. "Effect of Porosity on Flame Spread Along a Thin Combustible Solid with Randomly Distributed Pores." In Progress in Scale Modeling, Volume II, 303–14. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-10308-2_24.
Bhatt, Kangana, Sanjay Patel, Darshit Upadhyay, and Rajesh Patel. "Conversion of Solid Waste to Combustible Gases Using Non-stoichiometric Model for Plasma Pyrolysis Process." In Lecture Notes in Civil Engineering, 45–50. Singapore: Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-99-6616-5_5.
Zhao, L., D. Chen, Z. Wang, X. Ma, and G. Zhou. "Pyrolysis of Waste Plastics and Whole Combustible Components Separated From Municipal Solid Wastes: Comparison of Products and Emissions." In Thermochemical Waste Treatment, 121–31. Toronto; Waretown, New Jersey : Apple Academic Press, 2016. |: Apple Academic Press, 2017. http://dx.doi.org/10.1201/b19983-11.
Ouigmane, A., Otmane Boudouch, Aziz Hasib, and M. Berkani. "Management of Municipal Solid Waste in Morocco: The Size Effect in the Distribution of Combustible Components and Evaluation of the Fuel Fractions." In Handbook of Environmental Materials Management, 701–13. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-319-73645-7_82.
Ouigmane, A., O. Boudouch, A. Hasib, and M. Berkani. "Management of Municipal Solid Waste in Morocco: The Size Effect in the Distribution of Combustible Components and Evaluation of the Fuel Fractions." In Handbook of Environmental Materials Management, 1–13. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-58538-3_82-1.
Torikai, Hiroyuki, Akihiko Ito, and Yuji Kudo. "Section B Fire and Explosion - Effect of Gravity on Flame Spread Along a Thin Combustible Solid for Different Sample Orientations in Opposed Flow." In Progress in Scale Modeling, Volume II, 127–37. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-10308-2_10.
Kadupula, Pravallika, and Munilakshmi Nijagala. "Physical, Chemical Analysis of Solid Waste and Energy Recovery from Combustible Waste of Institution—A Case Study of Sri Venkateswara University College of Arts." In Waste Management as Economic Industry Towards Circular Economy, 167–70. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-1620-7_18.
Conference papers on the topic "Combustible solide":
Themelis, Nickolas J. "Integrated Management of Solid Wastes for New York City." In 10th Annual North American Waste-to-Energy Conference. ASMEDC, 2002. http://dx.doi.org/10.1115/nawtec10-1007.
Nakamura, Yuji. "Time-Dependent Mixture Formation and Heat Transfer Over Irradiated Solid Combustibles in Sub-Atmospheric Pressure Enclosure." In ASME/JSME 2007 Thermal Engineering Heat Transfer Summer Conference collocated with the ASME 2007 InterPACK Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/ht2007-32656.
Sukarni, Sumarli, Poppy Puspitasari, Heru Suryanto, and Rita Fajar Wati. "Physicochemical characteristics of various inorganic combustible solid waste (ICSW) mixed as sustainable solid fuel." In GREEN CONSTRUCTION AND ENGINEERING EDUCATION FOR SUSTAINABLE FUTURE: Proceedings of the Green Construction and Engineering Education (GCEE) Conference 2017. Author(s), 2017. http://dx.doi.org/10.1063/1.5003549.
Fernando, Anthony, and Graham Thorpe. "A Numerical Model for Horizontal Flame Spread over Combustible Solid Fuels." In Heat and Mass Transfer Australasia. Connecticut: Begellhouse, 2023. http://dx.doi.org/10.1615/978-1-56700-099-3.250.
Olivier, J. D., and C. G. Wilson. "A COMBUSTIBLE/ELECTRONEGATIVE GAS DETECTOR UTILIZING URANIUM DOPED CAST CERAMIC MICROCHANNELS." In 2006 Solid-State, Actuators, and Microsystems Workshop. San Diego, CA USA: Transducer Research Foundation, Inc., 2006. http://dx.doi.org/10.31438/trf.hh2006.59.
Kajikawa, Takenobu, Makoto Ito, Izumi Katsube, and Eiichi Shibuya. "Development of thermoelectric power generation system utilizing heat of combustible solid waste." In The thirteenth international conference on thermoelectrics. AIP, 1994. http://dx.doi.org/10.1063/1.46822.
Nakajima, Masayoshi, Katsuhiko Koshino, Shigeru Akutsu, and Masahiro Nakanishi. "Treatment of Low Radioactive Combustible Solid Wastes at Incineration Facility of Tokai Reprocessing Plant." In ASME 2001 8th International Conference on Radioactive Waste Management and Environmental Remediation. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/icem2001-1155.
Harley-Trochimczyk, A., J. Chang, T. Pham, J. Dong, M. A. Worsley, A. Zettl, W. Mickelson, and R. Maboudian. "Low power microheater-based combustible gas sensor with graphene aerogel catalyst support." In TRANSDUCERS 2015 - 2015 18th International Solid-State Sensors, Actuators and Microsystems Conference. IEEE, 2015. http://dx.doi.org/10.1109/transducers.2015.7181216.
Deckers, Jan, and Paul Luycx. "Incineration of Spent Ion Exchange Resins in a Triphasic Mixture at Belgoprocess." In ASME 2001 8th International Conference on Radioactive Waste Management and Environmental Remediation. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/icem2001-1152.
Chaudhari, Dushyant M., and Stanislav I. Stoliarov. "Semi-empirical modeling of flame spread over solid combustibles in a corner configuration." In 12th Asia-Oceania Symposium on Fire Science and Technology (AOSFST 2021). Brisbane, Australia: The University of Queensland, 2021. http://dx.doi.org/10.14264/64557ae.