Academic literature on the topic 'Clean-room manufacturing'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Clean-room manufacturing.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Clean-room manufacturing"
TAKAHASHI, Kozo, and Katsuhito YAGI. "Super clean room system for semiconductor manufacturing." Journal of Environmental Conservation Engineering 14, no. 5 (1985): 416–21. http://dx.doi.org/10.5956/jriet.14.416.
Full textQuarini, G. L., and Y. C. Chang. "Experimental Measurements and Theoretical Predictions of the Thermohydraulic Performance of Clean Rooms for the Semi-Conductor Industry." Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 210, no. 1 (February 1996): 9–18. http://dx.doi.org/10.1243/pime_proc_1996_210_288_02.
Full textSchneider, Germar, Thi Quynh Nguyen, Matthias Taubert, Julien Bounouar, Catherine Le-Guet, Andreas Leibold, Helene Richter, and Markus Pfeffer. "Contamination Control for Wafer Container Used within 300 mm Manufacturing for Power Microelectronics." Solid State Phenomena 255 (September 2016): 381–86. http://dx.doi.org/10.4028/www.scientific.net/ssp.255.381.
Full textRoth, N., and B. Schneider. "Clean Room Industrial Robot for Handling and Assembly in Semiconductor Industry." CIRP Annals - Manufacturing Technology 42, no. 1 (January 1993): 21–24. http://dx.doi.org/10.1016/s0007-8506(07)62383-x.
Full textWang, Fu Guo. "29.1: A Real‐time On‐line Illumination and Light Decline Monitoring Technology." SID Symposium Digest of Technical Papers 54, S1 (April 2023): 191–95. http://dx.doi.org/10.1002/sdtp.16261.
Full textBerthod, Faustine, Lucie Bouchoud, Febronia Grossrieder, Ludivine Falaschi, Salim Senhaji, and Pascal Bonnabry. "Learning good manufacturing practices in an escape room: Validation of a new pedagogical tool." Journal of Oncology Pharmacy Practice 26, no. 4 (September 29, 2019): 853–60. http://dx.doi.org/10.1177/1078155219875504.
Full textLi, Jianfeng, and Ya-Fei Zhou. "Occupational hazards control of hazardous substances in clean room of semiconductor manufacturing plant using CFD analysis." Toxicology and Industrial Health 31, no. 2 (January 4, 2013): 123–39. http://dx.doi.org/10.1177/0748233712469996.
Full textSyafei, M. Yani, and Tisa Lokadipati LS. "Improving Work System by Reducing Setup Time Activity in Drying Room in Pharmaceutical Industry with Single Minutes Exchange Die (SMED)." JIE Scientific Journal on Research and Application of Industrial System 3, no. 1 (November 12, 2018): 50. http://dx.doi.org/10.33021/jie.v3i1.497.
Full textAmin, M. Ruhul, Azizul Haque, Avishek Biswas, and Taufiq Hassan Mozumder. "Preparation and labeling of technitium-99m kit In pharmaceutical grade clean room." Journal of Chemical Engineering 27, no. 2 (January 29, 2014): 31–35. http://dx.doi.org/10.3329/jce.v27i2.17798.
Full textMishra, Devendra Kumar, and Shubham Shukla. "A Concept of Process Validation in Pharmaceutical Industries." International Journal of Innovative Science and Research Technology 5, no. 6 (July 15, 2020): 1427–31. http://dx.doi.org/10.38124/ijisrt20jun1073.
Full textDissertations / Theses on the topic "Clean-room manufacturing"
PEZZAROSSA, MICHELE. "The deep Al-based JTE: development and industrialization of a novel termination design for high-power semiconductor devices." Doctoral thesis, Politecnico di Torino, 2022. http://hdl.handle.net/11583/2964780.
Full textRaddenzati, Aurélien. "Optimisation du transport électronique dans le silicium cristallin (c-Si) en présence de nanostructures." Electronic Thesis or Diss., Mulhouse, 2017. https://www.learning-center.uha.fr/.
Full textOne of the limitations to the widespread use of photonic energy is the limited efficiency of photovoltaic (PV) cells, which can only be improved industrially today by using expensive, rare and toxic materials or fragile devices. Silicon is the most abundant material, the least toxic to manufacture and recycle. It is also the cheapest and the best mastered industrially. However, the proportion of the light spectrum that can be converted into electricity remains incomplete, which limits its efficiency. The introduction of photonic nanotechnology has made it possible to increase photoconversion efficiency by broadening the photoconvertible spectrum of native silicon and by using a multistage photoconversion effect outside the band gap. The operational nano-unit of crystalline silicon in this case is the "Segton", which is avariant of the divacancy organized as a buried layer and located at the artificially created interface between amorphous and crystalline silicon. This work provides an update on the demonstrators of giânt photoconversion cells, and in particular on the latest pre-industrial technological resources used for this type of production. This was implemented incollaboration with various laboratories. This thesis proposes new characterization methods adapted to photoconversion using the low-temperature photoluminescence spectra in order to detect the good generation of divacancies due to the implementation steps during the fabrication. Finally, the simulation, the manufacturing and the characterization activities are reviewed in detail, ending with a prospective to future industrial production
Book chapters on the topic "Clean-room manufacturing"
"Essential Clean-Room Design Elements." In Handbook of Pharmaceutical Manufacturing Formulations, Second Edition, Vol 6–109—Vol 6–128. CRC Press, 2009. http://dx.doi.org/10.1201/b14437-110.
Full textNiazi, Sarfaraz K. "Essential Clean-Room Design Elements." In Handbook of Pharmaceutical Manufacturing Formulations, Third Edition, 109–31. CRC Press, 2019. http://dx.doi.org/10.1201/9781315102498-11.
Full textViner, Andrew S. "Predicted and Measured Clean-Room Contamination." In Particle Control for Semiconductor Manufacturing, 129–41. Routledge, 2018. http://dx.doi.org/10.1201/9780203744307-8.
Full text"Essential Clean-Room Design Elements 111." In Handbook of Pharmaceutical Manufacturing Formulations, 131–50. CRC Press, 2016. http://dx.doi.org/10.3109/9781420081312-16.
Full textMakimoto, Hiroyuki, Tadashi Ojiro, Mai Shiraishi, Takeshi Hoh, and Kazuo Aoyama. "Development of a Screw Tightening Machine for Elastic Parts on Clean Room Environment." In Robotics, Mechatronics and Manufacturing Systems, 521–27. Elsevier, 1993. http://dx.doi.org/10.1016/b978-0-444-89700-8.50086-5.
Full textSem, Gilmore J. "The Dynamics of Aerosols in Clean-Room Environments: Implications for Monitoring and Control of Airborne Particles and their Sources." In Particle Control for Semiconductor Manufacturing, 143–57. Routledge, 2018. http://dx.doi.org/10.1201/9780203744307-9.
Full textConference papers on the topic "Clean-room manufacturing"
Brennan, Bill, Kin Sang Lam, Pete Beckage, and Bryon Hance. "Clean room Airborne Molecular Contamination (AMC) on damascene Cu interconnects." In 2007 International Symposium on Semiconductor Manufacturing. IEEE, 2007. http://dx.doi.org/10.1109/issm.2007.4446892.
Full textZajic, I., K. J. Burnham, D. Hill, and T. Larkowski. "Temperature model of clean room manufacturing area for control analysis." In UKACC International Conference on CONTROL 2010. Institution of Engineering and Technology, 2010. http://dx.doi.org/10.1049/ic.2010.0460.
Full textQian, Wang, and Meng Qinglin. "A New Energy-Saving Air Handling Unit for Clean Operating Room." In 2010 International Conference on Digital Manufacturing and Automation (ICDMA). IEEE, 2010. http://dx.doi.org/10.1109/icdma.2010.321.
Full textFukuda, Soji, Tadahiro Ohmi, and Shigetoshi Sugawa. "Development and Practical Application of High-efficiency Fire Control System for the Clean Room." In 2006 International Symposium on Semiconductor Manufacturing (ISSM). IEEE, 2006. http://dx.doi.org/10.1109/issm.2006.4493073.
Full textChien, C. C., C. N. Chang, Jefferson Shyu, Eric Hsiao, B. S. Tang, and Liang-Kun Zhu. "Innovative precise-environment design and technology of removing the pollutant from a clean room." In 2013 e-Manufacturing & Design Collaboration Symposium (eMDC). IEEE, 2013. http://dx.doi.org/10.1109/emdc.2013.6756037.
Full textGiallorenzo, Vito, and Pat Banerjee. "A Virtual Reality Enabling Parameterization of CFD Simulations for Non-Empty Room Layout Design." In ASME 1999 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/imece1999-0176.
Full textHawryluk, Andrew M., Gilbert Shelden, and Patrick Troccolo. "EUVL Reticle Factory Model and Reticle Cost Analysis." In Extreme Ultraviolet Lithography. Washington, D.C.: Optica Publishing Group, 1996. http://dx.doi.org/10.1364/eul.1996.r54.
Full textShare, Dylan, Lakshmi Krishnan, David Lesperence, Daniel Walczyk, and Raymond Puffer. "Cold Pressing of Membrane Electrode Assemblies for High-Temperature PEM Fuel Cells." In ASME 2010 8th International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2010. http://dx.doi.org/10.1115/fuelcell2010-33230.
Full textPerez-Diaz, J. L., I. Valiente-Blanco, E. Diez-Jimenez, J. Sanchez-Garcia-Casarrubios, M. A. Alvarez-Valenzuela, C. Cristache, J. Serrano, et al. "Contactless Superconducting Magnetic Instrument for Precise Positioning in Cryogenic Environments." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-63742.
Full text