Relevant bibliographies by topics / Chisels

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Chisels'

Author: Grafiati
Published: 4 June 2021
Last updated: 21 June 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Chisels.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Chisels"

1

Novendra, Alan, Refdinal Refdinal, and Sai Kham Le. "Hardness Analysis of Stone Breaker Chisel Made of Medium Carbon Steel as a Result of Hardening Using Water Cooling Media." Teknomekanik 3, no. 1 (2020): 22–27. http://dx.doi.org/10.24036/tm.v3i1.5172.

Full text
Abstract:
Stone chisels produced by blacksmiths which are made using leaf spring steel are often too brittle or fragile so that when they are used, they often occur in the form of cracks and breaks. This study aims to determine the appropriate hardness level for stone chisels. The process is carried out by comparing the hardness level of stone chisels that have been used but still in good condition and those that have been damaged. Broken stone chisels have a high adequate hardness compared to good stone chisels so that damaged stone chisels can be reconditioned to get the right rock chisel hardness. Heat treatment is given to damaged stone chisels to improve the hardness level by normalizing the process to restore the initial mechanical properties of the steel and increasing the hardness of the chisel by heating the steel and then quenching it using water cooling media. Based on the experimental process carried out that the hardness level of a good stone chisel is between 228 HB to 320 HB by heating the duan spring steel to a temperature of 780ºC with a hold time of 10 minutes then cooling it quickly using water and stone chisels can break when it is used because it has a very high hardness.
APA, Harvard, Vancouver, ISO, and other styles
2

Niece, S. La. "Depletion gilding from Third Millennium BC Ur." Iraq 57 (1995): 41–47. http://dx.doi.org/10.1017/s0021088900002977.

Full text
Abstract:
Three chisels (Fig. 1), excavated by Woolley (1934) in the 1920s from an Early Dynastic III grave at Ur, and now in the British Museum, were believed to be made of solid gold. Recently, however, it was noticed that the gold surface was blistering in places, revealing coppery coloured metal beneath, suggesting that they were gilded.The chisels were from a very rich grave (PG 800), known as “the Queen's Grave”. It is attributed to Queen Pu-abi (in the original excavation report her name was mistakenly transcribed as Shub-ad) and dated to c. 2600 BC. Five chisels U. 10429–33 were found with a gold saw behind a large steatite bowl which contained various copper tools. Part of the material from this grave is now in the British Museum. Other items are in the University Museum, Philadelphia, including two of the gold chisels and the gold saw, and in the Iraq Museum, Baghdad. The purpose of these gold tools has never been fully explained; presumably they were symbolic rather than functional. The two small chisels in the British Museum appear to have had handles and the excavation report lists rings of gold binding (U. 10443) as “probably belonging to their [the gold tools] handles” (Woolley 1934, p. 81). Bitumen and wood handles were found on copper chisels from Ur. The larger chisel is burnished all over and appears not to have been hafted. A small chisel (U.9130) and spearhead (U.9122) from another grave (PG 580) were also examined (Figs. 2 and 4). The tools are here referred to by their Ur excavation numbers, as in Woolley's report. The British Museum Department of Western Asiatic Antiquities registration numbers are given in the concordance below.
APA, Harvard, Vancouver, ISO, and other styles
3

Auly Fatkhur Hidayat, Muhamad Zainudin, and Sudarmono. "PERBANDINGAN HASIL PEMBUBUTAN DENGAN MENGGUNAKAN MATA PAHAT KARBIDA DAN MATA PAHAT HSS DI BENGKEL POLMUH." Nusantara Hasana Journal 2, no. 10 (2023): 122–26. http://dx.doi.org/10.59003/nhj.v2i10.790.

Full text
Abstract:
In the fast-paced period, human desire to produce and compete quickly, efficiently and economically, became the basis for the development of tools and machine tools, the competition provided the main motivation in making machine tools that have accuracy, accuracy and precision, so as to make shape in accordance with the design (model). So in this case what should be considered is how to choose and determine the tool material to be used on a lathe, because it can affect the level of wear on the tool eye itself and the fineness or surface roughness that will be generated can be controlled visually. Comparing the use of carbide chisel with HSS chisel to eat ST 37 steel workpieces, in this study aims to determine the use of chisel blade in order to produce smooth workpiece surface fibers and have a small degree of roughness visually in the turning process of steel workpieces ST 37. The results of testing the use of carbide chisels produce finer surface fibers and visually smaller roughness than HSS chisels, so if you turn the ST 37 steel workpiece you should use carbide chisels to get good results.
APA, Harvard, Vancouver, ISO, and other styles
4

Berger, Aaron, Santiago Benito, Philipp Kronenberg, and Sebastian Weber. "Impact of Thermophysical Properties of High-Alloy Tool Steels on Their Performance in Re-Purposing Applications." Materials 15, no. 23 (2022): 8702. http://dx.doi.org/10.3390/ma15238702.

Full text
Abstract:
Resource efficiency and circularity in the context of sustainability are rapidly gaining importance in the steel industry. One concept regarding circular economy is “repurposing”. In the context of this work, worn-out machine circular knives are used to produce new chisels for woodturning. The chisels can be extracted parallel or perpendicular to the rolling direction of the primary production process, resulting in an associated carbide orientation of the repurposed tool. The rolling direction, and therefore carbide alignment, will influence the wear resistance and the thermophysical properties, whereby the thermal conductivity will determine the temperatures at the tip of the chisel. Therefore, the thermal conductivity was investigated with the dynamic measurement method, where the specific heat capacity, density and thermal diffusivity of the extracted chisels and industrial reference chisels were measured separately. Moreover, the electrical resistivity was measured in order to calculate the electronic thermal conductivity according to the Wiedemann–Franz–Lorenz law. It was shown that all of these parameters exhibited different degrees of variability with rising temperature. In a detailed analysis, the thermal diffusivity could be identified as an essential parameter of thermal conductivity. By taking two conventional chisels with different chemical compositions and heat treatments into account, it can be seen that the microstructure determines the thermophysical properties. Considering the carbide direction, the chisels that were extracted parallel to the rolling direction showed differing thermophysical properties. Therefore, the carbide orientation is shown to play a significant role regarding the heat dissipation at the cutting edge, because differences, especially in the electronic thermal conductivity in the parallel and perpendicular extracted chisels, can be measured. In addition to the wear resistance factor, the thermal conductivity factor now also supports the removal of the repurposed chisels parallel to the rolling direction.
APA, Harvard, Vancouver, ISO, and other styles
5

Sahni, V. "No chisels." British Dental Journal 229, no. 1 (2020): 4. http://dx.doi.org/10.1038/s41415-020-1904-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Cove, P. "Couplands' chisels." British Dental Journal 206, no. 2 (2009): 57. http://dx.doi.org/10.1038/sj.bdj.2009.16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mustafayev, O., and S. Turdiev. "DYNAMIC IMPACT OF INCISORS WITH CUTTING AND CHIPPING TOOLS." National Association of Scientists 3, no. 32(59) (2020): 24–27. http://dx.doi.org/10.31618/nas.2413-5291.2020.3.59.293.

Full text
Abstract:
The paper studies the influence of the parameters of the dynamic impact of incisors. In the process of cutting (cutting-chipping) rocks with PDC-type chisels, the methods of setting the angle of the cutters on the chisel are considered and the optimal variant of the angle of the teeth on the bit blade is established.
APA, Harvard, Vancouver, ISO, and other styles
8

Radek, Pražan, Hůla Josef, Kovaříček Pavel, Čedík Jakub, Gerndtová Ilona, and Vlášková Marcela. "Functional properties of blade tiller working tools." Research in Agricultural Engineering 64, No. 2 (2018): 63–69. http://dx.doi.org/10.17221/106/2017-rae.

Full text
Abstract:
After the harvest of winter wheat, the tensile force, cross section of loosened soil and specific resistance of soil were measured on a loamy soil plot. During the comparative measurements, 3 blades were used with chisel width of 20 mm, 40 mm and 75 mm. In case of all blades, the measurements were carried out at the depth of 100, 200 and 300 mm. In the course of measurements, the standards of blades were attached in a measuring frame on six-component hinge with connected tensometric sensor. The selected blades were developed for a new type of tiller destined for primary cultivation of soil. Moreover, in case of a blade equipped by chisel there were used side wings of a width of 110, 150 and 200 mm for tillage into a depth of 100 mm. It was found that the width of blade chisels did not have a statistically significant effect on the values of specific resistance of soil during the soil tillage. At all widths of blade chisels, a trend of an increase in specific resistance of soil was recorded at growing recess into the soil.
APA, Harvard, Vancouver, ISO, and other styles
9

Reynolds Chávez, M. A., A. Capetillo Burela, M. Cadena Zapata, J. A. López López, and R. Zetina Lezama. "Vertical Tillage Technology for Primary Soil Preparation." Global Journal of Agricultural Innovation, Research & Development 9 (March 11, 2022): 10–19. http://dx.doi.org/10.15377/2409-9813.2022.09.2.

Full text
Abstract:
In the last decade in Mexico and other developing countries, soil preparation is the agricultural activity that represents the highest costs per unit of production, due to factors such as lack of appropriate equipment, excessive tillage, high consumption of fossil fuel, lack of knowledge and training for the adequate soil management, among others. The purpose of this research was to develop a vertical tillage technology that allows primary soil preparation without investment and reduces fuel consumption and effective operating time, improves labor quality and conserves soil and water resources. For this, a chisel plow prototype was developed based on four vertical tillage parameters: (1. Working depth 2. Number of bodies 3. Spacing between chisels 4. Use of wings or sweepers). These parameters determined the criteria and dimensions of the prototype for its development in design parameters such as spacing, position, angle of attack and depth of work. The performance evaluation of the prototype was compared with the disc plow; an implement that served as a witness as it was the most widely used technology. The standardized test method was used by the National Center for Standardization of Agricultural Machinery "CENEMA". The results obtained show a prototype plow with five chisels mounted on a double platform frame. The front platform is used for the coupling of three shallow chisels and the rear one, for the coupling of two deep chisels with wings. The implement adjusts for two working depths 0.30 and 0.40 meters and two working widths 1.80 m and 2.40 m respectively. The performance evaluation showed that vertical tillage with the chisel plow prototype in its two treatments showed an average saving of more than 45% in the fuel consumption variable and 53% in the effective working time compared to conventional tillage used with a disc plow. In terms of quality of work, vertical tillage shows high performance in soil disturbance, exceeding up to 65% of the work done by conventional tillage. Finally, it is concluded that the proposed technology should be used as technological innovation and replace the conventional disk plow technology, given its technological, economic and environmental advantages.
APA, Harvard, Vancouver, ISO, and other styles
10

Peldschus, Friedel, and Jens-Thorsten Wild. "INFLUENCE OF CHISEL SHARE FOR THE DESTRUCTION OF CONCRETE." JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT 9, no. 4 (2003): 260–65. http://dx.doi.org/10.3846/13923730.2003.10531337.

Full text
Abstract:
The energy shares occurring in the chiselling process were investigated in order to increase the productivity of the manual destruction of concrete. Apart from the influences of notch energy and cleaving energy, the energy loss due to friction forces was considered. As a result two new chisel forms were developed as a combination of sharp cutting edge and steep wedge. The effectiveness of these chisels was tested under experimental conditions as well as under reality conditions. It was found that the application of lateral tips at the chisel leads to an improved processing performance.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Chisels"

1

Зубко, В. М. "Позначення різців із механічним кріпленням багатогранних непереточуваних пластин". Thesis, Сумський державний університет, 2013. http://essuir.sumdu.edu.ua/handle/123456789/31254.

Full text
Abstract:
Позначення відбувається згідно ГОСТ 26476-85, який відповідає стандарту ISO 5608-80. Але ці стандарти мають певні неточності та неузгодженості. При цитуванні документа, використовуйте посилання http://essuir.sumdu.edu.ua/handle/123456789/31254
APA, Harvard, Vancouver, ISO, and other styles
2

Криворучко, Дмитро Володимирович, Дмитрий Владимирович Криворучко, Dmytro Volodymyrovych Kryvoruchko та А. В. Кузьменко. "Повышение производительности обработки канавок за счет применения резцов со сменными неперетачиваемыми пластинами СНП". Thesis, Издательство СумГУ, 2008. http://essuir.sumdu.edu.ua/handle/123456789/5972.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Криворучко, Дмитро Володимирович, Дмитрий Владимирович Криворучко, Dmytro Volodymyrovych Kryvoruchko та Я. Ю. Николаев. "Повышение эффективности применения резьбонарезных резцов со сменными неперетачиваемыми пластинами". Thesis, Издательство СумГУ, 2008. http://essuir.sumdu.edu.ua/handle/123456789/5940.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Månsson, Rosana. "La risa en los Chistes de Facebook." Thesis, Högskolan Dalarna, Spanska, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:du-12229.

Full text
Abstract:
People tell jokes in order to amuse and produce laughter. It is possible to represent laughter in the cyberspace discourse by writing how it sounds or by using a representation of a facial expression formed by various combinations of keyboard characters called emoticon. Jokes are appreciated by both men and women in our society but is there any difference between the way they represent laughter in the cyberspace discourse? In this research, we use the qualitative and quantitative method. First, we analyze the mechanism of linguistic construction of five jokes and their types and techniques based on Freud’s theory about this subject. Then we present the reactions produced by the jokes found in a social network and focus in the written representation of the laughter. The results show us that more women than men react to the jokes by writing a comment. The most popular laughter used by both men and women in a Spanish social network is "jajajaja" and the emoticon "XD". We have also found that people use the international laughter "hahahaha" and more women than men use "jejeje" to represent laughter in the same network. Although each individual has a laughter style, the way people represent the laughter graphically in the cyberspace discourse is almost the same between men and women but it differs in the way they use them as a reaction to the type and technique of the joke.
APA, Harvard, Vancouver, ISO, and other styles
5

SCAGLIUSI, NATASCHA. "FROM CHISEL TO BIT: THE REVOLUTION OF DIGITAL TECHNOLOGIES IN JEWELLERY DESIGN." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2015. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=29511@1.

Full text
Abstract:
PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO<br>COORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR<br>PROGRAMA DE SUPORTE À PÓS-GRADUAÇÃO DE INSTS. DE ENSINO<br>As tecnologias digitais de fabricação por adição ou subtração têm em si um potencial ainda inexplorado pela indústria joalheira. Por isso, essa dissertação tem como objetivo avaliar as vantagens técnicas e comerciais que podem incentivar a transformação no seu uso pela indústria de joias, inclusive apontando exemplos de iniciativas internacionais e nacionais, estas últimas centradas no Estado do Rio de Janeiro, assinalando assim as razões de seus sucessos e falhas. Através de uma pesquisa bibliográfica se busca determinar as bases históricas e especificações técnicas dos principais processos de produção tradicionais (técnicas manuais tais como o repuxo, a cinzelagem, a modelagem e fundição por cera perdida, entre outras) e digitais (impressão 3D, escaneamento 3D e modelagem digital), para, nesse contexto, seguir-se à experimentação com as tecnologias mais novas, como forma de se buscar a comprovação da existência do potencial técnico e comercial destas tecnologias para o setor joalheiro fluminense que justifiquem essa inovação.<br>The digital manufacturing technologies by addition or subtraction of material holds an unexplored potential for the jewellery industry. Therefore, this dissertation aims to assess the technical and commercial advantages that can encourage the transformation of its use by the jewellery industry, pointing out examples of international and national enterprises, the latest centered in the Brazilian State of Rio de Janeiro, thus signalizing the reasons of their successes and failures. Through a literature research this work pursuits the historical foundations and the technical specifications of the traditional manual techniques (such as repoussé, chasing, lost wax casting, among others) and digital manufacturing processes (3D printing, 3D scanning and 3D modelling), for, in this context, experimenting with the newest technologies, as a way to seek evidence of its technical and commercial potential for the jewellery industry in Rio de Janeiro that justifies the innovation.
APA, Harvard, Vancouver, ISO, and other styles
6

Piliackas, Júnior Afonso Mário. "A trova e suas relações com o chiste." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2004. http://hdl.handle.net/10183/2791.

Full text
Abstract:
A presente pesquisa busca estudar as relações entre o construto psicanalítico estádio do espelho e o aparecimento do Transtorno Específico da Função Motora em crianças. O trabalho parte do desenvolvimento motor, tal qual é classicamente concebido pela biologia, passando pela concepção de desenvolvimento dada pela psicomotricidade até o entendimento de uma metapsicopatologia do desenvolvimento. Também são trabalhados conceitos como Corpo, Esquema Corporal, Imagem Corporal, além do conceito de estádio do espelho. A pesquisa está baseada na tratamento psicanalítico de uma criança portadora de Transtorno Específico da Função Motora, servindo de base à construção metapsicológica de caso, que é a forma de apresentação dos achados de uma pesquisa psicanalítica.
APA, Harvard, Vancouver, ISO, and other styles
7

O'Dwyer, Maeve Anne. "From Batoni's brush to Canova's chisel : painted and sculpted portraiture at Rome, 1740-1830." Thesis, University of Edinburgh, 2017. http://hdl.handle.net/1842/23623.

Full text
Abstract:
This thesis examines the city of Rome as a primary context of British sociability and portrait identity during the period from 1740 to 1830. Part I considers the work of the portrait painter Pompeo Batoni. It examines the pictorial record of grand tourist sociability at Rome in the 1750s, questioning the complex articulation of nationality among British visitors, and the introduction of overt references to antiquity in the portraiture of Pompeo Batoni. It subsequently interrogates Batoni's use of the partially nude Vatican Ariadne sculpture in five portraits of male grand tourists, dating from Charles John Crowle in 1762, to Thomas William Coke in 1774. Part II of this thesis considers the realities of viewing the sculpted body at Rome, recreating the studios of sculptors Christopher Hewetson and Antonio Canova. It postis the studio space as a locus of sociability for British visitors to Rome, drawing on the feminine gaze in the form of the early nineteenth-century writings of Charlotte Eaton and Lady Murray. The final chapter moves from the focus on British sitters to examine sculpture by Antonio Canova, framing it within a wider discourse of masculinity and propriety. Thte reception of Canova's nude portrait sculpture of Napoleon Bonaparte and Pauline Borghese is considered as indicative of cultural anxieties stemming from new conceptions of gender.
APA, Harvard, Vancouver, ISO, and other styles
8

Skirrow, Roger G. (Roger George) Carleton University Dissertation Geology. "Silicification in a semiconformable alteration zone below the Chisel Lake massive sulphide deposit, Manitoba." Ottawa, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Fernandes, Sergio Augusto Franco. "Uma noção de verdade a partir da analise dos chistes conceituais." [s.n.], 2002. http://repositorio.unicamp.br/jspui/handle/REPOSIP/278869.

Full text
Abstract:
Orientador : Luiz Roberto Monzani<br>Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Filosofia e Ciencias Humanas<br>Made available in DSpace on 2018-08-02T05:55:40Z (GMT). No. of bitstreams: 1 Fernandes_SergioAugustoFranco_M.pdf: 7075954 bytes, checksum: 5f2371514172b65482d7550604a985f4 (MD5) Previous issue date: 2002<br>Resumo: Ao abordar algumas teorias sobre o riso e o cômico, relaciono-as com idéias treudianas acerca dos chistes. Aproximo a sofistica do chiste, além de marcar e ressaltar a diferença para com o cômico, através da análise dos "sofisticados" chistes "conceituais". A análise de tais chiste nos aponta para a existência de uma suposta verdade - verdade do sujeito -, que surge através do erro, do equívoco, da falha do raciocínio, do absurdo<br>Abstract: Approaching some theories about laughter and comic, I related them to the treudian ideas about Witz. I approximate sophistic to Witz, besides spotting and standing out the difference trom the comic, through the analisys of "sophisticated" "conceptual" Witz. The analisys of such Witz suggests the existence of a supposed truth - truth of the subject - that comes out trom the error, trom equivocity, from the fail of thinking, from absurdity<br>Mestrado<br>Mestre em Filosofia
APA, Harvard, Vancouver, ISO, and other styles
10

Backes, Clarice [UNESP]. "Aplicação e efeito residual do lodo de esgoto em sistemas de produção de tapetes de grama esmeralda." Universidade Estadual Paulista (UNESP), 2008. http://hdl.handle.net/11449/103250.

Full text
Abstract:
Made available in DSpace on 2014-06-11T19:32:26Z (GMT). No. of bitstreams: 0 Previous issue date: 2008-03-31Bitstream added on 2014-06-13T21:04:21Z : No. of bitstreams: 1 backes_c_dr_botfca.pdf: 1024890 bytes, checksum: 91a05475df40d34d77d94079924ecc73 (MD5)<br>Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)<br>Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)<br>A disposição final de lodo de esgoto no solo representa não somente um sistema apropriado, mas também a oportunidade para o manejo dos mesmos com o mínimo de efeito sobre o ambiente podendo gerar benefícios químicos e físicos ao solo. O trabalho teve como objetivo avaliar doses de lodo de esgoto e o efeito residual na produção e qualidade de tapetes de grama esmeralda bem como as alterações químicas desse solo. Os experimentos foram instalados e conduzidos em uma propriedade de grama, localizada na cidade de Itapetininga - SP. A cultura utilizada foi a grama Zoysia japonica Steud. conhecida como grama esmeralda. O delineamento experimental utilizado foi o de blocos ao acaso em parcelas subdivididas, com quatro repetições, sendo as parcelas principais constituídas por dois sistemas de manejo (com e sem o uso de um escarificador superficial “estrelinha”, utilizado para romper uma camada superficial compactada). e as subparcelas de cinco doses de lodo (0, 10, 20, 30 e 40 Mg ha-1, base seca), mais um tratamento com adubação química, de acordo com as necessidades da cultura. Utilizou-se o lodo da Estação de Tratamento de Esgoto de Jundiaí. As doses de lodo aplicadas correspondem às doses de 100, 200, 300 e 400 kg ha-1 de nitrogênio. Após a colheita dos tapetes, avaliou-se o efeito residual das doses de lodo e dos sistemas de manejo utilizados. Pode-se concluir que aos 165 dias após a aplicação do lodo de esgoto, a dose de 31 Mg ha-1 permitiu a formação completa do tapete de grama (100% da taxa de cobertura do solo). O mesmo resultado foi encontrado quando utilizou-se a adubação química. A testemunha e as parcelas que receberam 10 Mg ha-1 de lodo não formaram tapete. Verificou-se redução na massa dos tapetes de grama com o aumento das doses de lodo aplicadas. Com a utilização do escarificador...<br>The final disposal of municipal waste in the ground is not only an appropriate system, but also the opportunity for management of those with the least possible effect on the environment and can generate chemical and physical benefits to the soil. The present study aimed to evaluate the sewage sludge doses and its residual effects in the zoysiagrass sod production system and also the chemical changes in the soil. The experiment was carried out in a grass grower property, located in the city of Itapetininga-SP. The turfgrass used was Zoysia japonica Steud. known as esmeralda. The experimental design adopted was randomized blocks with split plot design, with four replications, the main plots consisting of two management systems (with and without chisel use, to break a compacted surface layer) and subplots consisting of five doses of sludge (0, 10, 20, 30 and 40 Mg ha-1, a dry basis), another treatment with chemical fertilization, according to the requirement of the culture. The sludge used came from “Estação de Tratamento de Esgoto de Jundiaí”. The doses of sludge applied correspond to the doses of 100, 200, 300 and 400 kg ha-1 of nitrogen. After sod harvesting it was evaluated the residual effect of the sludge doses and evaluated the management system used. It can be concluded that 165 days after application of sewage sludge the dose of 31 Mg ha-1 allowed the complete closing of the zoysiagrass sod (100% of soil cover rate). The same results were found when used chemical fertilization. The control and the plots that received 10 Mg ha-1 of sludge did not formed sod. There was a reduction in weight of zoysiagrass sod with increasing doses of sludge applied. With the use of surface chisel, there was a decrease in the strength of zoysiagrass sod. There were residual effect of sludge application and also of chemical fertilization in...(Complete abstract click electronic access below)
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Chisels"

1

Kalaitzakēs, Manolēs. Ergaleia xyloglyptikēs: Proviomēchanika skeparnia kai smilaria. Trochalia, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Huisken, Jesse. The Chisels : an account of segmented literacy. The Expert Press, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

author, Přichystal Antonín, Pohořelická Bartošková Tereza translator, Kopacz Jerzy translator, and Archeologický ústav (Akademie věd České republiky), eds. Silicite Axes in Moravia, Czech Silesia and Bohemia. Czech Academy of Sciences, Institute of Archaeology, 2020.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Effner, Jim. Chisels on a wheel: A comprehensive reference to modern woodworking tools and materials. Prakken Publications, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Borevich, Z. I. Teorii͡a︡ chisel. 3rd ed. Glav. red. fiziko-matematicheskoĭ lit-ry, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ontario. Ministry of Agriculture and Food. Chisel Plow. s.n, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Affairs, Canada Department of Indian and Northern. Chisel and brush. Department of Indian and Northern Affairs, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

V, Khvedelidze B., ed. Predstavlenie chisel kvadratichnymi formami: Sbornik rabot po teorii chisel. 6. "Met͡s︡niereba", 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

1943-, Miyamoto Matao, ed. Chiseki daichō, chiseki chizu: Ōsaka : Kaidai. Kashiwa Shobō, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kogan, L. A. Predstavlenie chisel kvadratichnymi formami. Izd-vo "Fan" Uzbekskoĭ SSR, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Chisels"

1

Lai, Karyn L. "Models of Knowledge in the Zhuangzi: Knowing with Chisels and Sticks." In Knowers and Knowledge in East-West Philosophy. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-79349-4_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ortega-Iturriaga, Adrián, and Tzitzi Sharhí Delgado. "Asymmetric Territories: Power as a Bag of Chisels Shaping Rural Mexico." In The Latin American Studies Book Series. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-82222-4_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Collie, Michael. "The Hours of the Chisel." In Huxley at Work. Palgrave Macmillan UK, 1991. http://dx.doi.org/10.1007/978-1-349-11111-4_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Riesco, Adrián, Irina Măriuca Asăvoae, and Mihail Asăvoae. "Slicing from Formal Semantics: Chisel." In Fundamental Approaches to Software Engineering. Springer Berlin Heidelberg, 2017. http://dx.doi.org/10.1007/978-3-662-54494-5_21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kambič, Bojan. "Caelum (The Chisel) to Draco (The Dragon)." In Patrick Moore's Practical Astronomy Series. Springer New York, 2009. http://dx.doi.org/10.1007/978-0-387-85355-0_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Asăvoae, Irina Măriuca, Mihail Asăvoae, and Adrián Riesco. "Context-Updates Analysis and Refinement in Chisel." In Model Checking Software. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-94111-0_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ferres, Bruno, Olivier Muller, and Frédéric Rousseau. "Chisel Usecase: Designing General Matrix Multiply for FPGA." In Applied Reconfigurable Computing. Architectures, Tools, and Applications. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-44534-8_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Whelan, Timothy. "Three Dialogues, Between Joseph Chisel and Thomas Wood." In Nonconformist Women Writers, 1720-1840, Part II vol 7. Routledge, 2024. http://dx.doi.org/10.4324/9781003551645-17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Shen, Shidong, Yicheng Liu, Lijun Zhang, Fu Song, and Zhilin Wu. "Formal Verification of RISC-V Processor Chisel Designs." In Lecture Notes in Computer Science. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-96-0602-3_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Tsvetayeva, Marina. "As patiently as stones are chiseled." In In the Inmost Hour of the Soul. Humana Press, 1989. http://dx.doi.org/10.1007/978-1-4612-3706-8_74.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Chisels"

1

Astolfi, Glenn, Peter Yancey, Arthur Wood, Levi Snowden, Jeffrey Piascik, and Robert Ross. "Atmospheric Plasma Coating Removal for Naval Engineering and Maintenance Applications." In CONFERENCE 2022. AMPP, 2022. https://doi.org/10.5006/c2022-18170.

Full text
Abstract:
ABSTRACT For military forces, the need for vessels to be docked for maintenance significantly affects fleet availability and the readiness of that force. In shipbuilding and naval maintenance industries, coating removal is an essential but time-consuming process. Grinders, needle guns, or hand tools (such as wire brushes and chisels) are often required for small-scale removals, and each comes with drawbacks such as hazards to operator health, slow removal rate, and damage to substrates. There is a significant need for a new tool that will accelerate small scale coating removal operations without these negative effects. Atmospheric Plasma Solutions Inc. (APS) has developed a single-person-carriable system that uses cold atmospheric air plasma to rapidly remove organic based coatings without altering the surface profile of underlying substrates. This paper details the results of laboratory and in-field testing of this system and highlights its adoption benefits to productivity, worker safety, corrosion control, and fleet readiness.
APA, Harvard, Vancouver, ISO, and other styles
2

Aji, Angga Asteriasti, Ahmad Yusran Aminy, and Fauzan Djamaluddin. "Effects of Adding Passive Mass and Varying Cutting Angles of Carbide Chisels with Cutting Oblique in AISI 1045 Steel Turning." In International Conference on Research in Engineering and Science Technology (IC-REST) 2023. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-r5eofj.

Full text
Abstract:
In the era of the manufacturing industry which is developing very rapidly, a manufactured product must have high product quality, especially machining products such as turning products. AISI 1045 steel is a type of low carbon steel with a carbon content of (0.43% – 0.50%) which is often used on the market because it has many advantages and the price is quite affordable. Vibrations that occur in the turning process cause undesirable effects; such as discomfort, inaccuracies in measurements and non-optimal turning results. Roughness really depends on the type of tool and tool geometry. In this study, carbide chisels were used with cutting variations, namely: variations in cutting angle (Kr) selected 800, 850 and 900, spindle rotation (n) 200 rpm, feeding (f) 0.3 mm/put , feeding depth (a) 1 mm and load mass (m) 150 grams, 300 grams and 450 grams. When turning, the amplitude value is measured using the Vibxpert toolII and After turning each set of machining variables, the roughness is measured using a machine Laser 3D Measuring Laser Microscope OLS4100. The measurement data obtained is graphed with the relationship of Load Mass &amp; cut angle with roughness and amplitude value. The purpose of this research is to find out the effect of passive mass reduction and the cutting angle of AISI 1045 Steel on the roughness and amplitude values. From the results of the analysis, it was found that the most optimal load mass is 450 grams and the cutting angle (Kr) the most optimal is 80° with a roughness value of 4.07 µm and an amplitude value of 0.15 mm/s2.
APA, Harvard, Vancouver, ISO, and other styles
3

Schoeberl, Martin, Hans Jakob Damsgaard, Luca Pezzarossa, Oliver Keszocze, and Erling Rennemo Jellum. "Hardware Generators with Chisel." In 2024 27th Euromicro Conference on Digital System Design (DSD). IEEE, 2024. http://dx.doi.org/10.1109/dsd64264.2024.00031.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Beamer, Scott. "Teaching Agile Hardware Design with Chisel." In 2024 27th Euromicro Conference on Digital System Design (DSD). IEEE, 2024. http://dx.doi.org/10.1109/dsd64264.2024.00030.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Plagwitz, Patrick, Frank Hannig, Jürgen Teich, and Oliver Keszocze. "DSL-Based SNN Accelerator Design Using Chisel." In 2024 27th Euromicro Conference on Digital System Design (DSD). IEEE, 2024. http://dx.doi.org/10.1109/dsd64264.2024.00032.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Meloni, Raffaele, H. Peter Hofstee, and Zaid Al-Ars. "Tywaves: A Typed Waveform Viewer for Chisel." In 2024 IEEE Nordic Circuits and Systems Conference (NorCAS). IEEE, 2024. http://dx.doi.org/10.1109/norcas64408.2024.10752465.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wang, Jianxin, Yuzheng Zheng, Chaoen Xiao, Lei Zhang, Xiangze Chang, and Xuanrui Zhang. "Study on Hardware Trojan Design and Implantation Based on Chisel." In 2024 4th International Conference on Electronic Materials and Information Engineering (EMIE). IEEE, 2024. http://dx.doi.org/10.1109/emie61984.2024.10617082.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Gotts, P. L., and M. Helliker. "The Development of the Chisel Nosed Fragment Simulating Projectiles for Personal Armour Testing." In Personal Armour Systems Symposium. Royal Military Academy (Belgium), 2025. https://doi.org/10.52202/078352-0036.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Petrović, Marija L., Dejan D. Petković, and Vladimir M. Milovanović. "An Efficient Hardware Design and Implementation of Various Shift Register Types Using Chisel HDL." In 2024 11th International Conference on Electrical, Electronic and Computing Engineering (IcETRAN). IEEE, 2024. http://dx.doi.org/10.1109/icetran62308.2024.10645179.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Zhao, Qi, Huibin Tao, Zhiheng He, and Ruining Feng. "Advanced DFT Clock Control Architectures with Agile Development for Chisel-Based High Performance RISC-V Processors." In 2024 IEEE International Test Conference in Asia (ITC-Asia). IEEE, 2024. http://dx.doi.org/10.1109/itc-asia62534.2024.10661311.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Chisels"

1

Plimpton, Steven James, Rodney Cannon Schmidt, Pauline Ho, and Lawrence Cale Musson. ChISELS 1.0: theory and user manual :a theoretical modeler of deposition and etch processes in microsystems fabrication. Office of Scientific and Technical Information (OSTI), 2006. http://dx.doi.org/10.2172/893127.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hanna, H. Mark, and Dana D. Schweitzer. Diesel Fuel Consumption During Chisel Plowing. Iowa State University, Digital Repository, 2014. http://dx.doi.org/10.31274/farmprogressreports-180814-82.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Licht, Mark A., and Kent R. Berns. No-tillage, Strip Tillage, Chisel Plow Tillage Trial. Iowa State University, Digital Repository, 2012. http://dx.doi.org/10.31274/farmprogressreports-180814-1795.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Licht, Mark A., Zachary A. Koopman, and Kent R. Berns. No-tillage, Strip-tillage, and Chisel Plow Tillage Trial. Iowa State University, Digital Repository, 2013. http://dx.doi.org/10.31274/farmprogressreports-180814-1815.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bailes, A. H., A. G. Galley, R. G. Skirrow, and J. Young. Geology of the Chisel volcanic-hosted massive sulphide area, Snow Lake, Manitoba. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1996. http://dx.doi.org/10.4095/207628.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wright, D. F., and G. F. Bonham-Carter. VHMS favourability mapping with GIS-based integration models, Chisel Lake-Anderson Lake area. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1996. http://dx.doi.org/10.4095/207595.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Skirrow, R. G., and J. M. Franklin. Semiconformable Hydrothermal Alteration Below the Chisel Lake Zn - Cu Massive Sulphide Deposit, Snow Lake, Manitoba. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1989. http://dx.doi.org/10.4095/130589.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Mallarino, Antonio P., and Kevin Van Dee. Phosphorus and Potassium Placement for Corn and Soybeans Managed with No-till and Chisel-Plow Tillage. Iowa State University, Digital Repository, 2003. http://dx.doi.org/10.31274/farmprogressreports-180814-1320.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Mallarino, Antonio P., and Kenneth T. Pecinovsky. Phosphorus and Potassium Placement for Corn and Soybeans Managed with No-till and Chisel-Plow Tillage. Iowa State University, Digital Repository, 2001. http://dx.doi.org/10.31274/farmprogressreports-180814-218.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Mallarino, Antonio P., Bernard J. Havlovic, and Robert Burcham. Phosphorus and Potassium Fertilization of Corn and Soybeans Managed with No-till and Chisel-Plow Tillage. Iowa State University, Digital Repository, 2001. http://dx.doi.org/10.31274/farmprogressreports-180814-2693.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Chisels' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography