Academic literature on the topic 'Ceramica industriale'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Ceramica industriale.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Ceramica industriale"
Albarella, Umberto, Valeria Ceglia, and Paul Roberts. "S. Giacomo degli Schiavoni (Molise): an early fifth century AD deposit of pottery and animal bones from central Adriatic Italy." Papers of the British School at Rome 61 (November 1993): 157–230. http://dx.doi.org/10.1017/s0068246200009971.
Full textDi Taranto, Enrico. "Il co-branding nell'industria alberghiera: un caso di studio." ECONOMIA E DIRITTO DEL TERZIARIO, no. 2 (December 2010): 247–63. http://dx.doi.org/10.3280/ed2010-002003.
Full textDi, Yong Jiang, Bi Jia, and Jun Wang. "Synthesis and Microstructure of Porous Ceramics Made from Industrial Solid Residues." Key Engineering Materials 602-603 (March 2014): 179–83. http://dx.doi.org/10.4028/www.scientific.net/kem.602-603.179.
Full textJiang, Hong. "Research on Applied-Information Technology in Online Compact System Based on Serial Communication." Advanced Materials Research 1046 (October 2014): 431–35. http://dx.doi.org/10.4028/www.scientific.net/amr.1046.431.
Full textPek, Emrah, Sezer Cihaner Keser, and Çetin Güler. "Deficiencies and potential corrections in ceramic art education according to the ceramic industry employees." Cypriot Journal of Educational Sciences 17, no. 9 (September 30, 2022): 3367–77. http://dx.doi.org/10.18844/cjes.v17i9.7739.
Full textSugiyama, Toyohiko, Hajime Nagae, Kazuo Suzuki, and Kenichi Nakano. "Ceramic Brick with High Water Retentivity Prepared from Ceramic Waste and by Products." Advances in Science and Technology 45 (October 2006): 2235–39. http://dx.doi.org/10.4028/www.scientific.net/ast.45.2235.
Full textRegueiro, M., E. Sánchez, V. Sánz, and E. Criado. "Cerámica Industrial en España." Boletín de la Sociedad Española de Cerámica y Vidrio 39, no. 1 (February 28, 2000): 5–30. http://dx.doi.org/10.3989/cyv.2000.v39.i1.872.
Full textHe, Jiabei, Mengshan Song, Kaiyun Chen, Dongxiao Kan, and Miaomiao Zhu. "Polymer-Derived Ceramics Technology: Characteristics, Procedure, Product Structures, and Properties, and Development of the Technology in High-Entropy Ceramics." Crystals 12, no. 9 (September 13, 2022): 1292. http://dx.doi.org/10.3390/cryst12091292.
Full textChen, Lili, Ulana Cikalova, Beatrice Bendjus, Stefan Muench, and Mike Roellig. "Characterization of ceramics based on laser speckle photometry." Journal of Sensors and Sensor Systems 9, no. 2 (October 20, 2020): 345–54. http://dx.doi.org/10.5194/jsss-9-345-2020.
Full textDing, Liang. "Analysis of Creative Teaching of Ceramics and Student Creativity in Colleges and Universities in China." Scientific and analytical journal Burganov House. The space of culture 18, no. 2 (May 10, 2022): 80–86. http://dx.doi.org/10.36340/2071-6818-2022-18-2-80-86.
Full textDissertations / Theses on the topic "Ceramica industriale"
Montaleone, Daniel. "Studio ed ottimizzazione di processi per la produzione di membrane ceramiche per la separazione di idrogeno." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2014. http://amslaurea.unibo.it/7624/.
Full textLo, Giudice Agata Stella Maria Bianca. "La dichiarazione ambientale di prodotto come strumento di sviluppo sostenibile di un territorio. Il distretto industriale della ceramica di Caltagirone." Doctoral thesis, Università di Catania, 2012. http://hdl.handle.net/10761/968.
Full textFAVALLI, RENATA C. "Modelagem e simulacao do processo de atomizacao na industria de revestimento ceramico." reponame:Repositório Institucional do IPEN, 2002. http://repositorio.ipen.br:8080/xmlui/handle/123456789/11016.
Full textMade available in DSpace on 2014-10-09T14:10:27Z (GMT). No. of bitstreams: 1 07981.pdf: 5585359 bytes, checksum: c0160291db44ef247a97d5737dda9a36 (MD5)
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Tese (Doutoramento)
IPEN/T
Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP
FAPESP:96/11957-7
Poletto, Emílio Rafael [UNESP]. "Relações de produção e apoio intitucional no arranjo produtivo local de pisos e revestimentos cerâmicos de Santa Gertrudes." Universidade Estadual Paulista (UNESP), 2008. http://hdl.handle.net/11449/95619.
Full textCoordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Nas últimas duas décadas aumentaram as pesquisas sobre as aglomerações de Pequenas e Médias Empresas (PMEs), que apresentavam alto crescimento e competitividade no mercado mundial. Os arranjo produtivo locais (APLs) podem ser designados como aglomerações de agentes econômicos, políticos e sociais, localizados em um mesmo território, com foco em um conjunto específico de atividades do setor produtivo e que apresentam vínculos expressivos de interação, cooperação e aprendizagem. Os APLs geralmente incluem empresas, que são aquelas que produzem os bens e serviços finais, fornecedoras de equipamentos e outros insumos, prestadoras de serviços, vendedoras, clientes, cooperativas, associações e representações. O APL de pisos e revestimentos cerâmicos de Santa Gertrudes (SP) é formado pelos municípios de Santa Gertrudes, Rio Claro, Cordeirópolis, Limeira e Piracicaba. Há 33 indústrias ceramistas localizadas neste APL, além de uma rede de instituições e prestadores de serviços. Os objetivos do presente trabalho são: buscar uma melhor compreensão da dimensão local do aprendizado e da cooperação entre indústrias e instituições no território do APL de Santa Gertrudes e mostrar como os recursos do território foram utilizados na competitividade das indústrias ceramistas locais.
In the last two decades have increase the researchs about the agglomerations of Small and Medium Enterprises (SME), which had high growth and competitiveness in the global trade. The Local Productive Arrangements (LPAs) can be designated as agglomerations of economic, political and social agents, located in the same territory, with a focus on a specific activities branch of the productive sector and that have expressive linkages of interaction, cooperation and learning. The LPAs usually include enterprises, which are those that produce the final goods and services, suppliers of equipments and other inputs, service providers, sellers, customers, cooperatives, associations and representations. The LPA of ceramic floors and tiles of Santa Gertrudes is formed by municipalities Santa Gertrudes, Cordeirópolis, Rio Claro, Limeira and Piracicaba. There are 33 industries located in this LPA, and a network of institutions and service providers. The aims of present dissertation are: seek a better comprehension of the local dimension of learning and cooperation between industries and institutions in the territory of Santa Gertrude’s LPA and show how the resources were used in the competitiveness of the locals ceramists industries.
Schmitt, Thais de Jesus. "Vidro de sistema Li2O-ZrO2-SiO2 como alternativa para síntese de pigmento cerâmico contendo resíduo industrial rico em Fe2O3." Universidade do Estado de Santa Catarina, 2012. http://tede.udesc.br/handle/handle/1625.
Full textCoordenação de Aperfeiçoamento de Pessoal de Nível Superior
Recently, the traditional ceramics industry has developed great interest in obtaining pigments which may have firing temperature stable, so that the action of molten glass does not interfere with the final product. In the coating industry, whose selection is strongly influenced by the visual appearance of the decorated surface, the color is an important feature. In order to search for new pigments that replace or optimize the old, new synthetic methods has being studied, as well as new systems and the incorporation of pigments alternative raw materials. Thus, this work studied the possibility of use of industrial byproducts, rich in iron, in the synthesis of pigments encapsulated in glassy matrix. The by product from the surface treatment of sheet metal was evaluated and characterized by chemical composition, crystalline phases and morphology of particles. The residue was added to the glassy matrix, homogenized using conventional milling and calcined at temperatures of 700 ° C to 900 ° C for 15 minutes. The characterization of the pigments obtained were performed using XRD and SEM. The pigments were used in ceramic and enamel porcelain paste and observed by optical microscopy and SEM. The results showed that color development becomes effective when the pigment is incorporated into porcelain paste, because it is a less aggressive. Was concluded that the developed color is influenced by oxide content employed, milling conditions and the processing temperature. The results showed that the use of the pigment developed does not interfere in the microstructural characteristics of pigmented material.
Recentemente, na indústria cerâmica tradicional, tem havido um interesse crescente na obtenção da inclusão de pigmentos na qual a temperatura de queima seja estável de tal forma que ação dos vidros fundidos não interfiram no produto final. No setor de revestimento, cuja seleção é fortemente influenciada pelo aspecto visual da superfície decorada, a cor passa a ser uma importante característica. Com o intuito de buscar novos pigmentos que substituam ou otimizem os já conhecidos, novos métodos de síntese estão sendo pesquisados, bem como novos sistemas pigmentantes e a incorporação de matérias primas alternativas. Desta forma, no presente trabalho, procurou-se estudar a possibilidade de aproveitamento de subprodutos industriais, ricos em ferro, na síntese de pigmentos encapsulados em matriz de vidro. O subproduto que é proveniente, do processo de tratamento superficial de chapas metálicas foi avaliado. O subproduto foi caracterizado quanto a sua composição química, fases cristalinas presentes e morfologia das partículas. O resíduo foi adicionado à matriz vítrea, sendo posteriormente homogeneizados, utilizando moagem convencional e seguidos de calcinação nas temperaturas de 700°C até 900°C por 15 minutos. As caracterizações dos pigmentos obtidos foram realizadas através de difratometria de raios X e microscopia eletrônica de varredura. Os pigmentos foram aplicados em esmalte cerâmico e em massa porcelânica. Posteriormente, foram realizadas análises de microscopia ótica e eletrônica de varredura. Os resultados evidenciaram que o desenvolvimento da cor torna-se efetivo quando o pigmento é incorporado em massa porcelânica, por se tratar de um meio menos agressivo. A coloração desenvolvida é influenciada por variáveis como o teor de óxido empregado, condições de moagem e temperatura de processamento. Os resultados mostraram ainda que a utilização do pigmento desenvolvido não interfere nas características microestruturais do material pigmentado.
Prim, Sônia Richartz. "Síntese e caracterização de pigmento de hematita, obtido a partir de um subproduto da indústria siderúrgica." Universidade do Estado de Santa Catarina, 2009. http://tede.udesc.br/handle/handle/1749.
Full textCoordenação de Aperfeiçoamento de Pessoal de Nível Superior
In the ceramic industry of wall and floor tiles, whose selection is strongly influenced by the visual aspect of the decorated surface, the color becomes one of the most important characteristics. With the purpose to search for new pigments that replace or optimize the already known, news method to synthesis are being researched, such as new pigments system and the incorporation of new raw materials. In this work was investigated the possibility of use of a waste industrial rich in iron in the synthesis of encapsulated pigments. It was selected five wastes, four from casting surfacing process and one waste from sheet metal treatment process. The wastes was characterized by chemical composition, cristalline phases present and morphology of the particles. The waste that introduced more percentage of hematite were added to the silica matrix, crystalline and amorphous and then homogenized using conventional milling and high energy followed by calcination at temperatures of 1050 to 1300ºC for 2 hours. The characterizations of pigments obtained were made through X-ray diffraction and scanning electron microscopy. The pigments were applied in ceramic enamel and porcelain body. Afterwards, it was carried out by colorimetry and scanning electron microscopy. The results showed that the development of color becomes effective when the pigment is incorporated in ceramic body, because it is less aggressive. The color developed is influenced by variables such as the oxide content employed, conditions of milling and processing temperature. The results have showed that the use of developed don t interfere in microstructural characteristics of pigmented material.
Na indústria da cerâmica de revestimento, cuja seleção é fortemente influenciada pelo aspecto visual da superfície decorada, a cor passa a ser uma importante característica. Com o intuito de buscar novos pigmentos que substituam ou otimizem os já conhecidos, novos métodos de síntese estão sendo pesquisados, bem como novos sistemas pigmentantes e a incorporação de matérias primas alternativas. Desta forma, no presente trabalho, procurou-se estudar a possibilidade de aproveitamento de subprodutos industriais, ricos em ferro, na síntese de pigmentos encapsulados em matriz de sílica. Foram avaliados cinco subprodutos, sendo quatro provenientes do processo de acabamento de peças fundidas e um gerado no processo de tratamento superficial de chapas metálicas. Os subprodutos foram caracterizados quanto a sua composição química, fases cristalinas presentes e morfologia das partículas. O subproduto que apresentou maior percentual de hematita foi adicionado à matriz de sílica, na forma cristalina (quartzo) e amorfa, sendo posteriormente homogeneizados, utilizando moagem convencional e de alta energia seguidos de calcinação nas temperaturas de 1050 a 1300ºC por 2 horas. As caracterizações dos pigmentos obtidos foram realizadas através de difratometria de raios X e microscopia eletrônica de varredura. Os pigmentos foram aplicados em esmalte cerâmico e em massa porcelânica. Posteriormente, foram realizadas análises colorimétrica e de microscopia eletrônica de varredura. Os resultados evidenciaram que o desenvolvimento da cor torna-se efetivo quando o pigmento é incorporado em massa porcelânica, por se tratar de um meio menos agressivo. A coloração desenvolvida é influenciada por variáveis como o teor de óxido empregado, condições de moagem e temperatura de processamento. Os resultados mostraram ainda que a utilização do pigmento desenvolvido não interfere nas características microestruturais do material pigmentado.
Silva, Bruna Pereira da. "Estudo da utilização de cinza de casca de arroz e efluente de biogás na plasticidade de materiais cerâmicos." Universidade Estadual do Oeste do Paraná, 2017. http://tede.unioeste.br/handle/tede/3117.
Full textMade available in DSpace on 2017-10-23T22:19:11Z (GMT). No. of bitstreams: 1 Bruna_P_Silva_2017.pdf: 554281 bytes, checksum: 32f277f0328349a24a029e61d6ec3753 (MD5) Previous issue date: 2017-05-03
The study analyzed the importance of seeking technologies for sustainable development in the field of red ceramic products. The plasticity characteristics of three types of soils, dystroferric Red Latosol, kaolinite and bentonite were evaluated when tested with water and with condensed gas (biogas effluent). Composites were made, and the Latosol was considered as the matrix and the additions of kaolinite, bentonite and rice husk ash as reinforcements. The methodology used followed the prerogatives of ABNT standards, NBR 6459, to determine the liquidity limit. The main focus of the analysis was the variation in the plasticity range of the composites when the molding fluid changes from water to condensed gas. The results showed that the Red Latosol in natura does not present a high plasticity, suggesting the incorporation of additives, whereas kaolinite and bentonite in natura have high plasticity. The incorporation of the reinforcements increased the plasticity of the matrix, and the kaolinite implied a smaller increase of plasticity and the bentonite in a larger increase. It was also observed that the use of condensed gas in substitution of water resulted in an improvement of the plastic characteristics of the matrix, suggesting its use in the manufacture of ceramic pieces. The contribution of this study is the reduction of the use of natural resources and the substitution of water by an industrial residue, in the production of ceramic materials, as regards to the improvement of plasticity.
O estudo analisou a importância de se buscar tecnologias para o desenvolvimento sustentável, no ramo dos produtos cerâmicos vermelhos. Foram avaliadas as características de plasticidade de três tipos de solos, Latossolo Vermelho distroférrico, caulinita e bentonita,quando ensaiados com água e com gás condensado (efluente de biogás). Foram feitos compósitos, sendo o Latossolo considerado a a matriz e as adiçoes de caulinita, bentonita e cinza de casca de arro consideradas como reforços. A metodologia empregada seguiu as prerrogativas das normas da ABNT, NBR 6459 para determinação do limite de liquidez. O principal foco da análise foi a variação na faixa de plasticidade dos compósitos quando o fluido de moldagem muda de água para gás condensado. Os resultados mostraram que o Latossolo Vermelho in natura não apresenta uma elevada plasticidade, sugerindo-se a incorporação de aditivos, enquanto a caulinita e a bentonita in natura apresentam plasticidades altas. A incorporação dos reforços elevou a plasticidade da matriz, sendo que a caulinita implicou em menor incremento de plasticidade e a bentonita em maior incremento. Observou-se também que a utilização do gás condensado em substituição a água resultou em melhora das características plásticas da matriz, sugerindo seu uso na fabricação de peças cerâmicas. A contribuição deste estudo está na redução da utilização de recursos naturais e na substutição da água por um resíduo industrial, na produção de materiais cerâmicos, no que se refere à melhoria da plasticidade.
Mazzacani, Valentina. "La gestione delle acque nell'industria ceramica: il caso di studio della Florim Ceramiche SpA." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2017.
Find full textKnop, Wanessa Rejane. "Estudo da viabilização da incorporação do pó de exaustão em massa cerâmica." Universidade do Estado de Santa Catarina, 2009. http://tede.udesc.br/handle/handle/1744.
Full textCoordenação de Aperfeiçoamento de Pessoal de Nível Superior
Inside the context of alternative search for the use of industrial waste as natural raw for the industrial ceramic, this work had the objective to evaluate the possibility of the use of exhauster powder generated in the foundry process. The characterization was performed by scanning electron microscopy, x-ray difratometry and thermal analysis (ATD, TG) noting that it is a powder with a high content of fine and compatible with the composition of ceramic bodies. Formulations were prepared with different exhauster powder content. The sintered materials at 1000, 1100 and 1200oC were characterized according technological properties as water absorption, linear shrinkage, bulk density. Microstructural analysis was carried out by scanning electron microscopy and X-ray diffraction. The results showed that it is possible to use the waste. It was observed that the waste increase the density in sintering process, and with high levels of waste occurs an increase of the porosity and intensification in the color of the new material. According to the results obtained in preliminary stage set up the methodology of work for the development of new materialThe second stage were developed new formulations prepared with different exhauster powder content, based on the preliminary stage of research and using as criterion the behavior after sintered. This new material were characterization by thermal analysis (ATD, TG), and some technological properties such as water absorption, linear shrinkage, bulk density. Finally were tests for resistance to bending, resistance to abrasion than the morphological analysis.The results showed the new material can be used as ceramic tiles, for, in general no significant changes it s physical and mechanical studied of ceramic body exhauster powder content in relation to the samples only with the mass, and all the compositions are within the minimum required for the characteristics analyzed.
Dentro do contexto de busca de alternativas para a utilização de subprodutos industriais como matéria-prima para a indústria cerâmica, este trabalho avaliou a possibilidade do emprego de pó de exaustão proveniente do processo de fundição em massa cerâmica atomizada tipo semi-grês. Este material foi caracterizado em uma etapa preliminar por Microscopia Eletrônica de Varredura (MEV), Difração de Raios-X (DRX), Análise Térmica Diferencial e Termogravimétrica (ATD e TG) constatando-se que se trata de um pó com alto teor de finos e composição compatível com a de massas cerâmicas. Foram desenvolvidas formulações com diferentes teores de pó de exaustão. Os materiais sinterizados entre 1000 e 1200oC foram caracterizados quanto a propriedades tecnológicas como a absorção de água, retração linear e densidade aparente. A análise microestrutural foi realizada utilizando Microscopia Eletrônica de Varredura (MEV). Estes resultados demonstraram a viabilidade da utilização do subproduto. Através dos experimentos observou-se que o subproduto promoveu um incremento no grau de sinterização, e elevados teores do mesmo aumentam a formação de porosidade e intensificam a cor do novo material. De acordo com os resultados obtidos na etapa preliminar definiu-se a metodologia de trabalho para o desenvolvimento do novo material. Na segunda etapa foram desenvolvidas novas formulações com a incorporação do pó de exaustão, baseada na etapa preliminar da pesquisa e utilizando como critério o comportamento após a sinterização. Este novo material foi caracterizado através da análise térmica diferencial, termogravimétrica, e de algumas propriedades tecnológicas como a absorção de água, retração linear e densidade aparente. Por fim foram realizados testes de resistência á flexão, resistência à abrasão além da análise morfológica.Os resultados obtidos demonstram que o novo material pode ser utilizado como placa cerâmica para revestimento, pois, em geral não houve mudanças significativas nas propriedades físicas e mecânicas estudadas da massa cerâmica com a incorporação do subproduto pó de exaustão em relação com as amostras somente com a massa e todas as composições estão dentro dos valores mínimos exigidos para as características analisadas.
Prim, Sônia Richartz. "Desenvolvimento de pigmentos espinélio: uma alternativa para uso de resíduos de galvanoplastia." Universidade do Estado de Santa Catarina, 2014. http://tede.udesc.br/handle/handle/614.
Full textCoordenação de Aperfeiçoamento de Pessoal de Nível Superior
The search for ceramic pigments with good properties are the basis of research conducted in this industry, in view of the importance of color for the final finished product. Aiming at seeking new pigments to replace or optimize existing ones, new synthesis methods and the incorporation of alternative raw materials are under study. In this work, we studied the possibility of using industrial waste from the treatment of effluents from the galvanoplasty process to synthetize pigments with spinel structure. The characterization of this type of waste and analysis of its potential to be used as chromophoric source were assessed in terms of chemical and mineralogical composition, thermal behavior, among others. The proportion of the transition elements, nickel and chromium present in the waste, allowed for the formation of important spinel structures. The synthesis method adopted consisted of the following steps: formulation; homogenization; calcination; and washing, when necessary. Firstly, we studied the addition of chromophoric ions Cr, Ni and Co in the structures MAl2O4, M=Zn, Mg, as well as the adoption of different temperatures (1000 to 1400 ºC/3h). The effect caused by solid dissolution of each ion in the structures and its relationship with the synthesis temperature was evaluated. It was possible to develop pigments with interesting color performance and different hues. Afterwards, the selection of a structure to obtain pigments from this selected chromophoric source was evaluated. We chose to work with structures NiCr2O4 and (Ni,Fe)(FeCr)2O4. The calcination temperature adopted was 1200 ºC/3h. The structures allowed for black pigments, however, with low pigmenting performance. In order to improve the performance of pigments with the addition of residue, we chose to further investigate the pigments formed with the 17 three elements nickel, iron and chromium at an equal molar ratio, resulting in the supposed structure (Ni0,5Fe0,5)(Fe0,5Ni0,5Cr1,0)O4, taking into consideration their degree of inversion. For this new step of the study, the synthetizing temperature adopted was 1000 ºC/3h. The aim was to assess the possibility of recovering the CaSO4 derived from the residue composition. For such, a washing stage was added to the pigment synthesis process. This new formulation favored the formation of the desired spinel phase, reducing the presence and intensity of secondary phases. The absence of the characteristic peaks indicating the presence of CaSO4 no DRX indicates the effectiveness of the washing process, which contributes to a reduction of a liquid phase formation and a better granulometric control. The results obtained after application showed that the synthesized pigments presented some instability during the application process. Therefore, studies were conducted to assess the influence of adding different concentrations of cobalt. The pigments synthetized with the addition of 0.3 mol of cobalt presented better pigmenting properties compared to pigments synthetized with the same structure. Adding waste into this composition led to the formation of pigments with improved performance, especially after application testing. The results allowed to associate this effect with the presence of secondary phases such as pyroxene, derived from the presence of SiO2 and CaO in the waste, resulting from the treatment process. The reproducibility of pigments synthesized with different batches of waste for the best composition studied was also evaluated. It was observed that they presented a good performance in face of the industrial conditions.
A busca por pigmentos cerâmicos com boas propriedades são a base das pesquisas realizadas neste setor, tendo em vista, a importância da cor para o produto final acabado. Com o intuito de buscar novos pigmentos que substituam ou otimizem os já conhecidos, novos métodos de síntese estão sendo pesquisados, bem como, a incorporação de matérias primas alternativas. No presente trabalho, estudou-se a possibilidade de aproveitamento de um resíduo industrial, proveniente do tratamento de efluentes do processo de galvanoplastia, na síntese de pigmentos com estrutura espinélio. A caracterização do resíduo e análise de suas potencialidades para uso como fonte cromófora, foram avaliadas em termos de composição química e mineralógica, comportamento térmico, entre outros. Os percentuais dos elementos de transição Níquel e Cromo presentes no resíduo possibilitaram a formação de estruturas de espinélios importantes. O método de síntese adotado englobou as seguintes etapas: formulação; homogeneização; calcinação e lavagem quando necessário. Primeiramente, foi estudada a adição dos íons cromóforos Cr, Ni e Co nas estruturas, MAl2O4, M=Zn, Mg, bem como, de diferentes temperaturas (1000 a 1400 ºC/3h). Avaliou-se o efeito causado pela dissolução sólida de cada íon nas estruturas, e sua relação com a temperatura de síntese. Foi possível desenvolver pigmentos com desempenho cromático interessante e tonalidades distintas. Posteriormente, foi avaliada a seleção de uma estrutura para a obtenção de pigmentos a partir desta fonte cromófora selecionada. Optou-se por trabalhar com as estruturas NiCr2O4 e (Ni,Fe)(FeCr)2O4. A temperatura de calcinação adotada foi de 1200 ºC/3h. As estruturas permitiram obter pigmentos negros, entretanto, com baixo desempenho pigmentante. A fim de aprimorar o desempenho dos pigmentos com adição de resíduo, 15 optou-se por investigar melhor os pigmentos formados com os três elementos Níquel, Ferro e Cromo, em uma igual proporção molar, resultando na suposta estrutura (Ni0,5 Fe0,5)(Fe0,5Ni0,5Cr1,0)O4, tendo em consideração o seu grau de inversão. Para esta nova etapa do trabalho a temperatura de sinterização adotada foi de 1000 ºC/3h. O objetivo foi avaliar a possibilidade de recuperação do CaSO4 proveniente da composição do resíduo. Para tanto, uma etapa de lavagem foi inserida no processo de síntese dos pigmentos. Esta nova formulação favoreceu a formação da fase espinélio desejada, diminuindo a presença e intensidade das fases secundárias. A não observância dos picos característicos da presença de CaSO4 no DRX, indica a eficácia do processo de lavagem, contribuindo para redução da formação de fase líquida e melhor controle granulométrico. Os resultados obtidos após aplicação permitiram concluir que os pigmentos sintetizados apresentaram certa instabilidade durante o processo de aplicação. Portanto, foram realizados estudos para avaliar a influência da adição de diferentes concentrações de Cobalto. Os pigmentos sintetizados com adição de 0,3 mol de Cobalto apresentaram melhores propriedades pigmentante ao serem comparados aos pigmentos sintetizados com a mesma estrutura. A incorporação de resíduo nesta composição propiciou a formação de pigmentos com melhor desempenho, principalmente após os testes de aplicação. A análise dos resultados permitiu associar este efeito a presença de fases secundárias, como o piroxênio, provenientes da presença de SiO2 e CaO no resíduo, resultante do processo de tratamento. A reprodutibilidade dos pigmentos, sintetizados com distintos lotes de resíduo para a melhor composição estudada, também foi avaliada. Pode-se observar que os mesmos apresentaram bom desempenho frente às condições industriais.
Books on the topic "Ceramica industriale"
Carlo, Bojani Gian, Ballardini Gaetano 1878-1953, Museo internazionale delle ceramiche (Faenza, Italy), and Museo artistico industriale (Rome, Italy), eds. Gaetano Ballardini e la ceramica a Roma: Le maioliche del Museo artistico industriale. Firenze: Centro Di, 2000.
Find full textGentili, Enzo Biffi. Guido Andloviz: Designer e direttore artistico per quarant'anni di ceramica industriale italiana : 1923-1961 : catalogo della mostra. Monfalcone [Italy]: Edizioni della laguna, 1995.
Find full textInterceram, Tile & Brick International., and Keramische Zeitschrift, eds. Ceramic suppliers international: Industrial buyers' guide for ceramics. Freiburg: Verlag Schmid Publication, 1993.
Find full textInterceram, Tile & Brick International., and Keramische Zeitschrift, eds. Ceramic suppliers international: Industrial buyers' guide for ceramics. Freiburg: Verlag Schmid Publication, 1994.
Find full textNicola, Babini Gian, Haviar Miroslav, Šajgalík Pavol, and NATO Advanced Research Workshop on Engineering Ceramics '96 (1996 : Smolenice, Slovakia), eds. Engineering ceramics '96: Higher reliability through processing. Dordrecht: Kluwer, 1997.
Find full textG, Kostorz, Eidgenössische Technische Hochschule Zürich, and ETHZ Latsis Symposium (1988 : Zürich, Switzerland), eds. High-tech ceramics: Viewpoints and perspectives. London: Academic Press, 1989.
Find full text(Firm), Find/SVP, ed. High technology industrial ceramics. New York, NY: FIND/SVP, 1987.
Find full textJones, J. T. Ceramics industrial processing and testing. 2nd ed. Ames: Iowa State University Press, 1993.
Find full textInstitute of Ceramics (Great Britain), ed. Health and safety in ceramics: A guide for educational workshops and studios. 3rd ed. Penkhull, Stoke-on-Trent, Staffs: The Institute, 1991.
Find full textHurley, George F. Processing for reliability of advanced caramics: Proceedings of a conference sponsored by the Industrial Research Institute and held at the Corning Glass Works, Corning, New York on October 21-22, 1986. Edited by Industrial Research Institute (New York, N.Y.). New York: Industrial Research Institute, 1986.
Find full textBook chapters on the topic "Ceramica industriale"
Stubos, A. K., A. Mitropoulos, T. Steriotis, F. K. Katsaros, G. E. Romanos, and N. K. Kanellopoulos. "Ceramic Membranes: Industrial Applications." In Physical Adsorption: Experiment, Theory and Applications, 485–510. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5672-1_19.
Full textRigaud, M. "Corrosion of Industrial Refractories." In Ceramic Transactions Series, 135–54. 735 Ceramic Place, Westerville, Ohio 43081: The American Ceramic Society, 2012. http://dx.doi.org/10.1002/9781118370940.ch7.
Full textR&D Colorobbia Department. "Ceramic Inkjet Inks." In Handbook of Industrial Inkjet Printing, 151–62. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2017. http://dx.doi.org/10.1002/9783527687169.ch7.
Full textHatta, Hiroshi, Roland Weiss, and Patrick David. "Carbon/Carbons and their Industrial Applications." In Ceramic Matrix Composites, 85–146. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118832998.ch5.
Full textSoula, Gérard. "Ceramics from Organometallic Polymers: Industrial Perspectives." In Inorganic and Organometallic Polymers with Special Properties, 31–42. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2612-0_3.
Full textWithers, C. J. "Fibrous ceramic filters in industrial use." In Gas Cleaning in Demanding Applications, 130–49. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-1451-3_7.
Full textFerber, M. K., and H. T. Lin. "Characterization of Ceramic Components Exposed in Industrial Gas Turbines." In Ceramic Transactions Series, 237–51. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118405970.ch16.
Full textMüller-Simon, Hayo. "Redox-Dependent Glass Properties and Their Control Under Industrial Conditions." In Ceramic Transactions Series, 299–313. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118405949.ch29.
Full textYuan, Fangmin. "Application of Piezoelectric Ceramics in Industrial Products." In Lecture Notes in Electrical Engineering, 807–13. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-3250-4_103.
Full textKübler, Jakob, Fernando Eblagon, Thomas Graule, and Bruno Ehrle. "Development of Ceramic Composites for Industrial Wood-Cutting Tools." In High-Performance Ceramics V, 1062–67. Stafa: Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/0-87849-473-1.1062.
Full textConference papers on the topic "Ceramica industriale"
Wenglarz, Richard A., Satish M. Calcuttawala, and J. Edward Pope. "Ceramic Vane Demonstration in an Industrial Turbine." In ASME 1997 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/97-gt-155.
Full textWenglarz, Richard, Sy Ali, and Abbie Layne. "Ceramics for ATS Industrial Turbines." In ASME 1996 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/96-gt-319.
Full textMeffre, A., R. Olives, X. Py, C. Bessada, P. Echegut, and U. Michon. "Design and Industrial Elaboration of Thermal Energy Storage Units Made of Recycled Vitrified Industrial Wastes." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-62930.
Full textEasley, M. L., and J. R. Smyth. "Ceramic Gas Turbine Technology Development." In ASME 1996 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/96-gt-367.
Full textSchenk, Bjoern. "Ceramic Gas Turbine Technology Development." In ASME 1999 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/99-gt-315.
Full textNagamatsu, Soichi, Kazuyuki Mizuhara, Yukio Matsuda, Akio Iwanaga, and Shoji Ishiwata. "Current Status of Industrial and Automotive Ceramic Gas Turbine R&D in Japan." In ASME 1991 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1991. http://dx.doi.org/10.1115/91-gt-101.
Full textJimenez, Oscar, John McClain, Bryan Edwards, Vijay Parthasarathy, Hamid Bagheri, and Gary Bolander. "Ceramic Stationary Gas Turbine Development Program — Design and Test of a Ceramic Turbine Blade." In ASME 1998 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/98-gt-529.
Full textEasley, Michael L., Bjoern Schenk, and Hongda Cai. "Ceramic Gas Turbine Technology Development." In ASME 1998 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/98-gt-553.
Full textEasley, Michael L., Bjoern Schenk, and Hongda Cai. "Ceramic Gas Turbine Technology Development." In ASME 1998 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/98-gt-554.
Full textBurakov, B., V. Gribova, A. Kitsay, M. Ojovan, N. C. Hyatt, and M. C. Stennett. "Synthesis of Crystalline Ceramics for Actinide Immobilisation." In The 11th International Conference on Environmental Remediation and Radioactive Waste Management. ASMEDC, 2007. http://dx.doi.org/10.1115/icem2007-7047.
Full textReports on the topic "Ceramica industriale"
Gonzalez, J. M., J. L. Ferri, and W. J. Rebello. Industrial operating experience of the GTE ceramic recuperator. Office of Scientific and Technical Information (OSTI), June 1990. http://dx.doi.org/10.2172/6516673.
Full textCaplan, M., R. Tandon, and R. Callis. Microwave Sintering of Ceramic Materials for Industrial Application Final Report CRADA No. TC-1116-95. Office of Scientific and Technical Information (OSTI), October 2017. http://dx.doi.org/10.2172/1406412.
Full textGregory Corman, Krishan Luthra, Jill Jonkowski, Joseph Mavec, Paul Bakke, Debbie Haught, and Merrill Smith. Melt Infiltrated Ceramic Matrix Composites for Shrouds and Combustor Liners of Advanced Industrial Gas Turbines. Office of Scientific and Technical Information (OSTI), January 2011. http://dx.doi.org/10.2172/1004879.
Full text