Relevant bibliographies by topics / Cementation

Academic literature on the topic 'Cementation'

Author: Grafiati
Published: 4 June 2021
Last updated: 24 January 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Cementation.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Cementation"

1

Wu, Ya Sheng, Da Kang Zhong, Nan Sheng Qiu, and Kang Ning Liu. "Diagenesis and Controlling Factors of Kalashayi Clastic Reservoir in South of Tahe Oilfield." Advanced Materials Research 524-527 (May 2012): 85–88. http://dx.doi.org/10.4028/www.scientific.net/amr.524-527.85.

Full text
Abstract:
The Kalashayi sandstone reservoir deposited in tidal-flat facies. Main diagenesis include compaction, cementation and dissolution, which compaction belongs to middle-weak, point to linear contact between grains and pore-space cementation by carbonate rocks; dissolution features that feldspar grains and carbonate cementation’s dissolution. The reservoir is mesopore and medium permeability reservoir in a current depth of 4800-5300m. The reason cause this mesopore and medium permeability reservoir are considered as the following factors. The physical properties of reservoirs are mainly controlled by sedimentary microfacies and diagenesis. The strong tidal channels and tidal creaks current leads to the composition of rock mineral pure, quartz content is high, the grains coarser, good sorting and low matrix. The early compaction was so little that some pores were conserved in carbonate cementation, and in the later diagenetic process, carbonate cementation were corroded to secondary pores.
APA, Harvard, Vancouver, ISO, and other styles
2

Xia, Yao Xian, Hong Bin Wang, Da Wang, and Wen Xiu Zhao. "The Influence Factors and Enhancement Measures of the Quality of Well Cementation in the Hai-La-Er Area." Applied Mechanics and Materials 275-277 (January 2013): 1575–77. http://dx.doi.org/10.4028/www.scientific.net/amm.275-277.1575.

Full text
Abstract:
This article aims at the geology situation of Hai-la-er area, researches the influence factors of the quality of well cementation in the Hai-la-er area., establishes, improves and perfects the improvement measures of enhancing the quality of well cementation in the Hai-la-er area, and also produces notable effects in the filed test. In 2004, there were 11 well cementations in all and 5 of them were of high grade. The average sealing section was 1537 meters, and the factor of merit was 45.45%.
APA, Harvard, Vancouver, ISO, and other styles
3

Chin, Akane, Masaomi Ikeda, Tomohiro Takagaki, Toru Nikaido, Alireza Sadr, Yasushi Shimada, and Junji Tagami. "Effects of Immediate and Delayed Cementations for CAD/CAM Resin Block after Alumina Air Abrasion on Adhesion to Newly Developed Resin Cement." Materials 14, no. 22 (November 21, 2021): 7058. http://dx.doi.org/10.3390/ma14227058.

Full text
Abstract:
The purpose of this study was to evaluate the effect of one week of Computer-aided design/Computer-aided manufacturing (CAD/CAM) crown storage on the μTBS between resin cement and CAD/CAM resin composite blocks. The micro-tensile bond strength (μTBS) test groups were divided into 4 conditions. There are two types of CAD/CAM resin composite blocks, namely A block and P block (KATANA Avencia Block and KATANA Avencia P Block, Kuraray Noritake Dental, Tokyo, Japan) and two types of resin cements. Additionally, there are two curing methods (light cure and chemical cure) prior to the μTBS test—Immediate: cementation was performed immediately; Delay: cementation was conducted after one week of storage in air under laboratory conditions. The effect of Immediate and Delayed cementations were evaluated by a μTBS test, surface roughness measurements, light intensity measurements, water sorption measurements and Scanning electron microscope/Energy dispersive X-ray spectrometry (SEM/EDS) analysis. From the results of the μTBS test, we found that Delayed cementation showed significantly lower bond strength than that of Immediate cementation for both resin cements and both curing methods using A block. There was no significant difference between the two types of resin cements or two curing methods. Furthermore, water sorption of A block was significantly higher than that of P block. Within the limitations of this study, alumina air abrasion of CAD/CAM resin composite restorations should be performed immediately before bonding at the chairside to minimize the effect of humidity on bonding.
APA, Harvard, Vancouver, ISO, and other styles
4

Zoria, Olena, Оleksiy Ternovtsev, and Dmytro Zoria. "Purification of concentrated waste water of pcb production from copper ions." Problems of Water supply, Sewerage and Hydraulic, no. 35 (May 31, 2021): 11–20. http://dx.doi.org/10.32347/2524-0021.2021.35.11-20.

Full text
Abstract:
In modern conditions, it is important to create a comprehensive technology for processing wastewater containing copper compounds, with the disposal of precious metals, the organization of circulating water supply of the enterprise and obtaining safe for disposal sludge. Methods of sewage treatment of galvanic productions are considered. The results of experimental studies of the process of copper extraction from water by cementation on iron powder particles under static conditions are presented. The technological scheme of the reactor-cementator is given. The influence of various factors on the process of copper cementation – pH, concentration and ratio of iron and copper in the reaction mixture, contact time were studied. The time at which the greatest rate of change of residual copper concentration is observed is determined. The influence of the pH value of the cementation process was also determined. As a result of the obtained data, it is concluded that the concentration of hydrogen ions in the solution affects the course of the contact exchange reaction. The higher the acidity of the solution, the higher the recovery rate of copper. Promising directions for the creation of closed water circulation systems in the process of copper wastewater treatment are outlined.
APA, Harvard, Vancouver, ISO, and other styles
5

Rodríguez-Collell, Juan Ramón, Damian Mifsut, Amparo Ruiz-Sauri, Luis Rodríguez-Pino, Eva María González-Soler, and Alfonso Amador Valverde-Navarro. "Improving the cementation of the tibial component in knee arthroplasty." Bone & Joint Research 10, no. 8 (August 1, 2021): 467–73. http://dx.doi.org/10.1302/2046-3758.108.bjr-2020-0524.r1.

Full text
Abstract:
Aims The main objective of this study is to analyze the penetration of bone cement in four different full cementation techniques of the tibial tray. Methods In order to determine the best tibial tray cementation technique, we applied cement to 40 cryopreserved donor tibiae by four different techniques: 1) double-layer cementation of the tibial component and tibial bone with bone restrictor; 2) metallic cementation of the tibial component without bone restrictor; 3) bone cementation of the tibia with bone restrictor; and 4) superficial bone cementation of the tibia and metallic keel cementation of the tibial component without bone restrictor. We performed CT exams of all 40 subjects, and measured cement layer thickness at both levels of the resected surface of the epiphysis and the endomedular metaphyseal level. Results At the epiphyseal level, Technique 2 gave the greatest depth compared to the other investigated techniques. At the endomedular metaphyseal level, Technique 1 showed greater cement penetration than the other techniques. Conclusion The best metaphyseal cementation technique of the tibial component is bone cementation with cement restrictor. Additionally, if full tibial component cementation is to be done, the cement volume used should be about 40 g of cement, and not the usual 20 g. Cite this article: Bone Joint Res 2021;10(8):467–473.
APA, Harvard, Vancouver, ISO, and other styles
6

Mévrel, R., C. Duret, and R. Pichoir. "Pack cementation processes." Materials Science and Technology 2, no. 3 (March 1986): 201–6. http://dx.doi.org/10.1179/mst.1986.2.3.201.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wilson, P. R. "Low force cementation." Journal of Dentistry 24, no. 4 (July 1996): 269–73. http://dx.doi.org/10.1016/0300-5712(95)00074-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sugano, Hiroyasu. "Remounting and Cementation." Journal of Japan Gnathology 7, no. 1-2 (1986): 23–29. http://dx.doi.org/10.14399/jacd1982.7.23.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Nicholls, J. I. "Esthetic veneer cementation." Journal of Prosthetic Dentistry 56, no. 1 (July 1986): 9–12. http://dx.doi.org/10.1016/0022-3913(86)90273-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Shirazy, Adel, Keyvan Khayer, Aref Shirazi, Abdolhamid Ansari, and Ardeshir Hezarkhani. "Cementation exponent estimate in carbonate reservoirs: A new method." Global Journal of Computer Sciences: Theory and Research 10, no. 2 (October 30, 2020): 66–72. http://dx.doi.org/10.18844/gjcs.v10i2.5894.

Full text
Abstract:
There are two approaches for measuring hydrocarbon saturation: well log interpretation and usually developed formulas. Archie’s equation is one of the most fundamental equations used for water saturation calculation. Archie’s equation includes three factors: cementation factor, tortuosity and saturation exponent. Archie determines these factors based on lab results in sandstone and provides fixed value for them. Carbonate reservoirs have a variety of textures, shapes and distribution of pores; therefore, the mentioned factors, especially cementation are not considered constant. In this study, the relationship between cementation factor and density log was examined because cementation factor is defined as a parameter that has a close relationship with density. By calculating the matrix density and accordance factor between the matrix density and cementation factor from core’s analysis, a log will be generated that can estimate the variation of cementation factor around the borehole. This method is useable for calculating the cementation factor in carbonate rocks. Keywords: Cementation factor, carbonate reservoir, density, new method, exponents.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Cementation"

1

Goldsmith, Ian Robert. "Cementation in modern and ancient reefs." Thesis, Durham University, 1987. http://etheses.dur.ac.uk/6748/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Leetham, R. P. "Continuous cementation in particulate electrolytic cells." Thesis, University of Newcastle Upon Tyne, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.355839.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bernard, Lium Donovan Mujah Anak. "Biologically Induced Cementation for Soil Stabilisation." Thesis, Curtin University, 2019. http://hdl.handle.net/20.500.11937/77105.

Full text
Abstract:
Soil bio-cementation via microbially induced calcite precipitation (MICP) process generates calcite in the soil matrix through ureolysis by bacteria. This research has successfully produced effective calcite crystals; relatively larger in size than previously reported ones, and are rhombohedral in shape that favours the strategic spots of soil pore throats for precipitation. These effective calcite crystals bind sand grains together, resulting in an increase in both the strength and stiffness of the otherwise uncemented soil.
APA, Harvard, Vancouver, ISO, and other styles
4

McLemore, Thomas B. "Cementation Processes of Naturally Aged Hawaiian Calcarerous Sands." Thesis, University of Hawaii at Manoa, 2002. http://hdl.handle.net/10125/6951.

Full text
Abstract:
Researchers have studied cementation of calcareous sands for decades. While cementation increases static and cyclic strengths, it also reduces skin friction on piles. Cementation of sands in their own environment varies widely with many different factors. Obtaining undisturbed samples can be difficult and costly, and laboratory reproduction of samples has become an accepted method for testing calcareous materials. The focus of this research is on understanding the processes and effects of early cementation in calcareous sand. Understanding of these processes will allow researchers the ability to better estimate light cementation effects for various types of calcareous sands. The project compared results of cyclic and static triaxial tests, cone penetrometer tests, and Scanning Electron Microscope (SEM) photographs to show the differences between two distinctly varied calcareous sands at similar densities and aged for relatively short periods of time. "Natural aging" was the baseline used for this project. All samples were saturated with distilled water and aged under a confining pressure of one atmosphere. Although not truly representative of the "natural" environment, it provides a relative baseline of how calcareous sands react in the absence of any additional cementing agent. The results of the project bring about many conclusions, as well as raising additional questions. The SEM pictures provide critical information to the project. The photographs provide a visual sense of the bonds caused from the cementation and give a visual picture of the mechanisms causing increases in static and cyclic strength. The SEM photos show two distinctly different types of bonding between the two types of sands investigated, and generally show an increase in bonding as aging time is increased. Data from all laboratory tests also show related strength increases, which can be attributed to the increase in cementation shown in the SEM photographs.
xii, 101 leaves
APA, Harvard, Vancouver, ISO, and other styles
5

Long, Sarah Louise. "Aspects of cementation in recent and fossil Brachiopoda." Thesis, Imperial College London, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.246325.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sairafi, Abdulbasit Salem. "Electro-cementation of silver using a fluidised bed." Thesis, University of Newcastle Upon Tyne, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.334743.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

PINTO, HIMER ALBERTO MIELES. "NUMERICAL STUDY OF CEMENTATION PROCESS IN ERODED WELLS." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2016. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=29321@1.

Full text
Abstract:
PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO
COORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR
PROGRAMA DE EXCELENCIA ACADEMICA
Atualmente na indústria do petróleo a simulação numérica é frequentemente usada para avaliar diferentes processos através de poderosas ferramentas de software que ajudam a evitar uma pesquisa experimental, que pode ser uma tarefa cara e às vezes impraticáveis. O objetivo deste estudo é apresentar uma investigação numérica para encontrar uma melhor eficiência no processo de cimentação em poços erodidos. Neste processo, um fluido desloca um outro fluido através de um tubo com secção transversal de área variável. Ambos os fluidos podem ter um comportamento não-newtoniano. A análise é feita pela solução numérica das equações governantes, utilizando o método de volumes finitos. Estudos anteriores mostraram que os processos de deslocamento através dos poços verticais são governados principalmente pela relação de viscosidades e densidades dos fluidos, pela excentricidade do espaço anular, e pelo número de Reynolds do escoamento. Além disso, outras variáveis tais como a rotação da parede e a geometria do poço podem influenciar a eficiência do deslocamento. Dessa forma, serão analisados o efeito de alguns destes parâmetros no escoamento ao longo do poço e na eficiência de remoção nos poços erodidos, a fim de ajudar na otimização dos processos de limpeza e de remoção.
Currently in the oil industry, the numerical simulation is often used to eval-uate different processes through powerful software tools that help to prevent an experimental research in a real well, which can be an expensive and sometimes impractical task. The purpose of this study is to present a numerical investigation to find a better efficiency in the cementation process in eroded wells. In this pro-cess, one fluid displaces another through a tube with variable cross sectional area. Both fluids may have non-Newtonian behavior. The analysis is done by the nu-merical solution of the governing equations, using the finite volume method. Pre-vious studies showed that the displacement process through vertical wells are ruled primarily by the viscosity and density ratios of the fluids, the eccentricity of the annulus, and the Reynolds number. In addition, other variables such as the casing rotation and well geometry can influence the displacement efficiency. Then, the analysis of the influence of these parameters in the flow pattern through the well and removal efficiency in eroded wells will be performed, and will help to optimize the cleaning and removal processes.
APA, Harvard, Vancouver, ISO, and other styles
8

Iwabuchi, Jotaro. "The influence of cementation on liquefaction resistance of sands." Diss., Virginia Polytechnic Institute and State University, 1986. http://hdl.handle.net/10919/49796.

Full text
Abstract:
Cohesionless sands are known to be susceptible to failure by liquefaction when they are saturated and subjected to earthquake shaking. Considerable study has been directed towards this subject over the past 20 years in recognition of the possibility of large-scale property damage or loss of life due to this type of failure. Recent evidence has shown that small degrees of cementation in a sand significantly reduce the likelihood of liquefication. However, the work to date has been limited to studies with conventional testing devices and simple loading paths. These devices are suspected of inducing premature failure in cemented soils, and are not capable of modeling the effects of multiaxial loading. In this investigation, there were two major objectives. The first involved the development and fabrication of a new three~dimensional shear device with the capability of applying load to cemented sands with a minimum of stress concentration effects, and of using load paths which are more representative of the true effects of an earthquake than is possible in conventional equipment. The second concerned performance of a series of production tests to investigate the behavior of cemented sands under a range of earthquake loading paths. The production tests were largely performed using the new three—dimensional shear device. The test results showed that cemented soils have more resistance to earthquake loading than previously thought since stress concentration effects in conventional testing do induce premature failure through the effects of stress concentrations. On the other hand, it was found that either cemented or uncemented sands show less resistance to earthquake loadings if multiaxial stress conditions are applied to the sample as opposed to uniaxial loadings. This is important in explaining the fact that sites with seemingly similar conditions often show different behavior, since slightly different earthquake loading pattems can cause different responses. One factor explaining differences in response is found to be the mean normal stress, which is not the same for all loadings, and plays an important role in the pore pressures developed in the soil.
Ph. D.
incomplete_metadata
APA, Harvard, Vancouver, ISO, and other styles
9

Nelson, Anthony. "Cementation and dolomitization of Mississippian limestones, Kentucky and Virginia." Thesis, Virginia Polytechnic Institute and State University, 1985. http://hdl.handle.net/10919/101249.

Full text
Abstract:
The Mississippian Newman Limestone (0-30 m thick) in eastern Kentucky contains pink-staining, aquifer-related cements (up to 750 ppm Mn+2); up to 1000 ppm Fe+2; δ¹⁸ -7.5 to -6.8 per mil; δ¹³C 1.7 to -6.8) that is non-luminescent (low Fe and Mn) in the recharge area, but becomes uniformly dully luminescent downdip. This aquifer developed toward the end of Newman limestone deposition during two major regressions (Late Mississippian and Mississippian-Pennsylvanian time). Shallow burial cementation was less common to the south-east into the Appalachian Basin, where the Mississippian limestone is up to 1000 m thick. Here, phreatic meteoric diagenesis in more distal parts of the aquifer caused high-Mg calcite and aragonite grains to be leached, while isotopically light, fine dolomite (δ¹⁸O -1.7 to -6.7 per mil; δ¹³C 2.7 to -5.3 per mil) replaced muddy carbonates in a paleomixing zone. As the aquifer evolved, low-iron, dully luminescent calcite was precipitated from reducing pore waters. With increasing burial, compaction caused spalling of ooid cortices; iron rich saddle dolomite (δ¹⁸O -5.5 to -11.2 per mil; δ¹³C 0.9 to 1.4 per mil), and moderately ferroan (purple-staining) calcite cement (0-1200 ppm Mn2+; 1000-3000 ppm Fe2+; δ¹⁸O -4.6 to -10.6 per mil; δ¹³C 2.7 to -6 per mil) precipitated in pores and fractures from waters that were increasingly dominated by warm, basinal, oil-bearing fluids expelled from dewatering Paleozoic shales. These coarse dolomites overgrew early fine dolomite of reservoirs, while the purple staining calcite filled intercrystal porosity outside of the reservoirs. At or near deepest burial, Fe-rich (blue-staining) calcite (up to 1200 ppm Mn2+; 3000-7000 ppm Fe2+; δ¹⁸O -3. 8 to -7. 8 per mil; δ¹³C 1. 8 to -1. 5 per mil) precipitated in much of the remaining void space in the limestones. During uplift of the sequence late calcite cements with decreasing Fe contents were precipitated from increasingly oxidizing fluids that penetrated the section through fractures and remaining pore spaces.
M.S.
APA, Harvard, Vancouver, ISO, and other styles
10

Pina, Magnum Leo, and Magnum Leo Pina. "Reverse Engineering the Physical Chemistry of Making Egyptian Faience through Compositional Analysis of the Cementation Process." Thesis, The University of Arizona, 2016. http://hdl.handle.net/10150/622834.

Full text
Abstract:
The cementation process of making Egyptian faience, reported by Hans Wulfffrom a workshop in Qom, Iran, has not been easy to replicate and various views have been set forth to understand the transport of materials from the glazing powder to the surfaces of the crushed quartz beads. Replications of the process fired to 950° C and under-fired to 850° C were characterized by electron beam microprobe analysis (EPMA), petrographic thin section analysis, and scanning electron microscopy with energy dispersive x-ray analysis (SEM-EDS). Chemical variations were modeled using thermal data, phase diagrams, and copper vaporization experiments. These replications were compared to 52 examples from various collections, including 20th century ethnographic collections of beads, glazing powder and plant ash, 12th century CE beads and glazing powder from Fustat (Old Cairo), Egypt, and to an earlier example from Abydos, Egypt in the New Kingdom and to an ash example from the Smithsonian Institution National Museum of Natural History.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Cementation"

1

Molenaar, Nicolaas. Eogenetic and telogenetic cementation of sandstones =: Eogenetische en telogenetische cementatie van zandstenen. Utrecht: Instituut voor Aardwetenschappen der Rijksuniversiteit te Utrecht, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

H, Worden Richard, and Morad Sadoon, eds. Quartz cementation in sandstones. Malden, MA: Blackwell Science, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wadhwani, Chandur P. K., ed. Cementation in Dental Implantology. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-642-55163-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Worden, Richard H., and Sadoon Morad, eds. Quartz Cementation in Sandstones. Oxford, UK: Blackwell Publishing Ltd., 2000. http://dx.doi.org/10.1002/9781444304237.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Morad, Sadoon, ed. Carbonate Cementation in Sandstones. Oxford, UK: Blackwell Publishing Ltd., 1998. http://dx.doi.org/10.1002/9781444304893.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sasidharan, N. Sathi. Carbonization-cementation process for treatment of spent IX resins. Mumbai: Bhabha Atomic Research Centre, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Sadoon, Morad, ed. Carbonate cementation in sandstones: Distribution patterns and geochemical evolution. Malden, MA: Blackwell Science, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Stole-Hansen, Kjell. Studies of some phenomena in control engineering projects: With application to precipitation and cementation processes. Trondheim: Norwegian University of Science and Technology, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Minor, Scott A. Regional survey of structural properties and cementation patterns of fault zones in the northern part of the Albuquerque basin, New Mexico--implications for ground-water flow. Reston, Va: U.S. Geological Survey, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Haggerty, Dennis J. Investigation of formation damage from mud cleanout acids and injection waters in Aux Vases sandstone reservoirs. Champaign, IL: Illinois State Geological Survey, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Cementation"

1

Yule, Pamela, Richard Holliday, James Field, Francis Nohl, and Robert Wassell. "Fitting and Cementation." In BDJ Clinician’s Guides, 421–44. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-79093-0_24.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ho, Christopher C. K. "Appraisal and Cementation." In Practical Procedures in Aesthetic Dentistry, 172–77. Oxford, UK: John Wiley & Sons, Ltd, 2017. http://dx.doi.org/10.1002/9781119324911.ch6.6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Rosenstiel, Stephen F., and Ronald E. Goldstein. "Cementation of Restorations." In Ronald E. Goldstein's Esthetics in Dentistry, 1354–66. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2018. http://dx.doi.org/10.1002/9781119272946.ch44.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Wang, Da, Wei Zhang, Xiaoxi Zhang, Guolong Zhao, Ruqiang Zuo, Jialu Ni, Gansheng Yang, et al. "Casing and Well Cementation." In Springer Geology, 303–31. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-46557-8_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Frodsham, Aaron E., and Laura B. Eisenmenger. "Ablation and Cementation Technologies." In Metastatic Bone Disease, 203–19. New York, NY: Springer New York, 2016. http://dx.doi.org/10.1007/978-1-4614-5662-9_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bianco, Robert, and Robert A. Rapp. "Pack cementation diffusion coatings." In Metallurgical and Ceramic Protective Coatings, 236–60. Dordrecht: Springer Netherlands, 1996. http://dx.doi.org/10.1007/978-94-009-1501-5_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Berteigne, M., G. Grevillot, and D. Tondeur. "Fixed Bed Cementation Experiments." In Ion Exchange: Science and Technology, 599–608. Dordrecht: Springer Netherlands, 1986. http://dx.doi.org/10.1007/978-94-009-4376-6_24.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wadhwani, Chandur P. K. "Restoring the Dental Implant: The Biological Determinants." In Cementation in Dental Implantology, 1–14. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-55163-5_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wadhwani, Chandur P. K., Kevin C. Lin, and Curtis S. K. Chen. "Intraoral Radiography and Implant Restoration." In Cementation in Dental Implantology, 163–76. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-55163-5_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Akimoto, Ken M., and Ralf F. Schuler. "Treatment Options Related to Cement Contamination and Repair of Lesions." In Cementation in Dental Implantology, 177–97. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-55163-5_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Cementation"

1

McPherson, S. A. "Cementation of Horizontal Wellbores." In SPE Annual Technical Conference and Exhibition. Society of Petroleum Engineers, 2000. http://dx.doi.org/10.2118/62893-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kelly, Nicola, Derek Cawley, Fintan J. Shannon, and Patrick J. McGarry. "Computational Analysis of Cementation Techniques for Total Knee Arthroplasty." In ASME 2009 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2009. http://dx.doi.org/10.1115/sbc2009-206643.

Full text
Abstract:
Tibial implant component loosening is the most common cause of aseptic total knee arthroplasty (TKA) failure. Stability of a primary TKA relies on adequate fixation and therefore the cementation technique used may provide an enhanced clinical result. Surface cementation and full cementation techniques are employed to achieve fixation in TKA. Full cementation entails the application of bone cement on the tibial cut surface and along the keel; while surface cementation is the application of cement solely on the proximal tibial cut surface.
APA, Harvard, Vancouver, ISO, and other styles
3

Omre, H., K. Solna, H. Tjelmeland, L. Claesson, and C. Holter. "Calcite Cementation: Description and Production Consequences." In SPE Annual Technical Conference and Exhibition. Society of Petroleum Engineers, 1990. http://dx.doi.org/10.2118/20607-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Dræge, Anders, Morten Jakobsen, and Tor Arne Johansen. "Rock physics modelling of shale cementation." In SEG Technical Program Expanded Abstracts 2004. Society of Exploration Geophysicists, 2004. http://dx.doi.org/10.1190/1.1845170.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Tabibi, M., and M. A. Emadi. "Variable Cementation Factor Determination (Empirical Methods)." In Middle East Oil Show. Society of Petroleum Engineers, 2003. http://dx.doi.org/10.2118/81485-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Krava´rik, Kamil, Zuzana Holicka´, Anton Peka´r, and Milan Zˇatkula´k. "VUJE Experience With Cementation of Liquid and Wet Radioactive Waste." In ASME 2010 13th International Conference on Environmental Remediation and Radioactive Waste Management. ASMEDC, 2010. http://dx.doi.org/10.1115/icem2010-40108.

Full text
Abstract:
Liquid and wet LLW generated during operation as well as decommissioning of NPPs is treated with different methods and fixed in a suitable fixation matrix so that a final product meets required criteria for its disposal in a final repository. Cementation is an important process used for fixation of liquid and wet radioactive waste such as concentrate, spent resins and sludge. Active cement grout is also used for fixation of low level solid radioactive waste loaded in final packing containers. VUJE Inc. has been engaged in research of cementation for long. The laboratory for analyzing radioactive waste properties, prescription of cementation formulation and estimation of final cement product properties has been established. Experimental, semi-production cementation plant has been built to optimize operation parameters of cementation. VUJE experience with cementation of liquid and wet LLW is described in the presented paper. VUJE has assisted in commissioning of Jaslovske´ Bohunice Treatment Centre. Cement formulations for treatment of concentrate, spent resins and sludge have been developed. Research studies on the stability of a final concrete packaging container for disposal in repository have been performed. Gained experience has been further utilized for design and manufacture of several cementation plants for treatment of various liquid and wet LLW. Their main technological and technical parameters as well as characterization of treated waste are described in the paper. Applications include the Mochovce Final Treatment Centre, Movable Cementation Facility utilizing in-drum mixing for treatment of sludge, Cementation Facility for treatment of tritiated water in Latvia and Cementation Facility for fixation of liquid and solid institutional radioactive waste in Bulgaria, which utilizes lost stirrer mixer.
APA, Harvard, Vancouver, ISO, and other styles
7

Meireles, L. T. P., A. Hussain, M. J. Welch, and I. L. Fabricius. "Controls on Cementation in a Chalk Reservoir." In 79th EAGE Conference and Exhibition 2017. Netherlands: EAGE Publications BV, 2017. http://dx.doi.org/10.3997/2214-4609.201700940.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Gagen, Emma, Anat Paz, Alan Levett, and Gordon Southam. "Biogeochemical Processes Responsible for Iron Duricrust Cementation." In Goldschmidt2020. Geochemical Society, 2020. http://dx.doi.org/10.46427/gold2020.775.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lee, Changho, Jong-Sub Lee, Woojin Lee, Hyung-Koo Yoon, Tae-Hyeon Cho, and Truong Hung Quang. "Cementation Effects on Rigid-Soft Particle Mixtures." In Geo-Denver 2007. Reston, VA: American Society of Civil Engineers, 2007. http://dx.doi.org/10.1061/40916(235)4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Gomez, Michael G., Jason T. DeJong, Collin M. Anderson, Douglas C. Nelson, and Charles M. Graddy. "Large-Scale Bio-Cementation Improvement of Sands." In Geotechnical and Structural Engineering Congress 2016. Reston, VA: American Society of Civil Engineers, 2016. http://dx.doi.org/10.1061/9780784479742.079.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Cementation"

1

Rapp, R. A. Pack cementation diffusion coatings for iron-base alloys. Office of Scientific and Technical Information (OSTI), February 1995. http://dx.doi.org/10.2172/83864.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bergquist, G. G. ,. Fluor Daniel Hanford. System design description sand, slag, and crucible cementation process PFP. Office of Scientific and Technical Information (OSTI), February 1997. http://dx.doi.org/10.2172/325846.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hess, A. L. CSER 96-013: Cementation Process, glovebox HA-20MB at PFP. Office of Scientific and Technical Information (OSTI), September 1996. http://dx.doi.org/10.2172/672333.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Rapp, R. A. Codeposition of chromium and silicon onto iron-base alloys via pack cementation. Office of Scientific and Technical Information (OSTI), December 1992. http://dx.doi.org/10.2172/6927298.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Rapp, R. A. Pack cementation diffusion coatings for Fe-base and refractory alloys. Final report. Office of Scientific and Technical Information (OSTI), March 1998. http://dx.doi.org/10.2172/663568.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Harper, Mark Andrew. Codeposition of chromium and silicon onto iron-base alloys via pack cementation. Office of Scientific and Technical Information (OSTI), December 1992. http://dx.doi.org/10.2172/10123944.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Brown, M., G. Huntington, and T. Brown. Identification of the mineral phases responsible for cementation of Lurgi spent oil shale. Office of Scientific and Technical Information (OSTI), February 1991. http://dx.doi.org/10.2172/5989897.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

DOBBIN, K. D. CSER 00-001 Criticality Safety Evaluation Report for Cementation Operations at the PFP. Office of Scientific and Technical Information (OSTI), April 2000. http://dx.doi.org/10.2172/802989.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Markel, Mark D. The Effect of Cementation and Autogenous Bone Grafting on Allograft Union and Incorporation. Fort Belvoir, VA: Defense Technical Information Center, May 1994. http://dx.doi.org/10.21236/ada280324.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Markel, Mark D. The Effect of Cementation and Autogenous Bone Grafting on Allograft Union and Incorporation. Fort Belvoir, VA: Defense Technical Information Center, September 1994. http://dx.doi.org/10.21236/ada285630.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Cementation' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography