Academic literature on the topic 'Cavity beam position monitors'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Cavity beam position monitors.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Cavity beam position monitors"
Srinivasan, S., S. Brandenburg, J. M. Schippers, and P. A. Duperrex. "Development of a fourfold dielectric-filled reentrant cavity as a beam position monitor (BPM) in a proton therapy facility." Journal of Instrumentation 17, no. 09 (September 1, 2022): P09013. http://dx.doi.org/10.1088/1748-0221/17/09/p09013.
Full textLee, Sojeong, In Soo Ko, Changbum Kim, Seunghwan Kim, Juho Hong, and Heungsik Kang. "Design of the X-band cavity beam position monitor." Journal of the Korean Physical Society 63, no. 7 (October 2013): 1322–26. http://dx.doi.org/10.3938/jkps.63.1322.
Full textKim, Y. I., S. T. Boogert, Y. Honda, A. Lyapin, H. Park, N. Terunuma, T. Tauchi, and J. Urakawa. "Principal Component Analysis of cavity beam position monitor signals." Journal of Instrumentation 9, no. 02 (February 28, 2014): P02007. http://dx.doi.org/10.1088/1748-0221/9/02/p02007.
Full textLee, Sojeong, Young Jung Park, Changbum Kim, Seung Hwan Kim, Dong Cheol Shin, Jang-Hui Han, and In Soo Ko. "PAL-XFEL cavity beam position monitor pick-up design and beam test." Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 827 (August 2016): 107–17. http://dx.doi.org/10.1016/j.nima.2016.04.057.
Full textYang, Liu, Xiaozhong He, Shanshan Cao, Linwen Zhang, Renxian Yuan, Yongbin Leng, and Luyang Yu. "A method of bunch by bunch measurement at nanoseconds interval by using cavity beam position monitors." Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 976 (October 2020): 164270. http://dx.doi.org/10.1016/j.nima.2020.164270.
Full textWang, Bao Peng, Yong Bin Leng, Wei Min Zhou, Lu Yang Yu, and Ying Bing Yan. "Cavity Beam Position Monitor Test System Based on Virtual Instrument." Applied Mechanics and Materials 333-335 (July 2013): 2354–57. http://dx.doi.org/10.4028/www.scientific.net/amm.333-335.2354.
Full textJian-Hua, Chu, Tong De-Chun, and Zhao Zhen-Tang. "RF measurements of a C-band cavity beam position monitor." Chinese Physics C 32, no. 5 (May 2008): 385–88. http://dx.doi.org/10.1088/1674-1137/32/5/012.
Full textWalston, Sean, Stewart Boogert, Carl Chung, Pete Fitsos, Joe Frisch, Jeff Gronberg, Hitoshi Hayano, et al. "Performance of a high resolution cavity beam position monitor system." Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 578, no. 1 (July 2007): 1–22. http://dx.doi.org/10.1016/j.nima.2007.04.162.
Full textYang, Liu, Xiaozhong He, Ruo Tang, Quanhong Long, and Linwen Zhang. "Correction of coupled higher-order modes in the S-parameter characterization of wideband cavity beam position monitors." Review of Scientific Instruments 92, no. 1 (January 1, 2021): 014705. http://dx.doi.org/10.1063/5.0019791.
Full textShin, S., Eun-San Kim, Hyoung Suk Kim, and Dongchul Son. "Design of a Low-Q S-Band Cavity Beam Position Monitor." Journal of the Korean Physical Society 52, no. 4 (April 15, 2008): 992–98. http://dx.doi.org/10.3938/jkps.52.992.
Full textDissertations / Theses on the topic "Cavity beam position monitors"
Bromwich, Talitha. "Development of high-resolution cavity beam position monitors for use in low-latency feedback systems." Thesis, University of Oxford, 2018. http://ora.ox.ac.uk/objects/uuid:7d3fada0-2676-4983-8e2c-16d2d6d4f7d0.
Full textBlaskovic, Kraljevic Neven. "Development of a high-precision low-latency position feedback system for single-pass beamlines using stripline and cavity beam position monitors." Thesis, University of Oxford, 2015. https://ora.ox.ac.uk/objects/uuid:0286d951-d177-4d3a-8bce-a50e6ccb8645.
Full textSargsyan, Vahagn. "Cavity beam position monitor for the TESLA-cryomodule cross-talk minimization /." [S.l.] : [s.n.], 2003. http://deposit.ddb.de/cgi-bin/dokserv?idn=969232640.
Full textJoshi, Nirav Yashvantray. "Design and analysis techniques for cavity beam position monitor systems for electron accelerators." Thesis, Royal Holloway, University of London, 2013. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.594166.
Full textDal, Forno Massimo. "Theoretical and experimental analysis of interactions between electromagnetic fields and relativistic electrons in vacuum chamber." Doctoral thesis, Università degli studi di Trieste, 2013. http://hdl.handle.net/10077/8537.
Full textIl laser ad elettroni liberi (FEL) è una sorgente luminosa di quarta generazione che ha specifiche più stringenti rispetto alle sorgenti luminose di terza generazione, tra le quali ricordiamo i sincrotroni. La cosiddetta emittanza e la traiettoria del fascio determinano la qualità del fascio, e devono soddisfare severi requisiti nei FEL. Per esempio, nella sala ondulatori, la posizione del fascio deve essere misurata con risoluzione micrometrica. Il controllo della posizione del fascio può essere effettuato utilizzando i “Cavity Beam Position Monitor” (Cavity BPM). Questa tesi descrive l’attività di ricerca eseguita sui Cavity BPM. Precisamente, la progettazione, la simulazione elettromagnetica e l'ottimizzazione di un Cavity BPM sono state effettuate. Successivamente, 25 Cavity BPM sono stati fabbricati e installati nella sala ondulatori del progetto FERMI@Elettra. I segnali sono stati acquisiti e processati con un nuovo tipo di elettronica, e una serie di misure sono state effettuate. Il secondo dispositivo studiato in questo dottorato è l'acceleratore lineare di particelle. Tradizionali strutture acceleranti, dotate di un accoppiatore a singolo ingresso causano la degradazione delle proprietà fascio elettronico, a causa dell’ asimmetria del campo elettromagnetico. Un nuovo tipo di accoppiatore, con cortocircuito mobile, viene proposto, nel quale il campo elettrico è stato simmetrizzato. La progettazione, simulazione elettromagnetica e ottimizzazione del dispositivo sono state effettuate, e un prototipo della struttura accelerante è stato prodotto e sintonizzato. Il campo elettrico è stato misurato con il metodo bead-pull. Infine, in questa tesi sono descritti i deflettori RF ad alta energia, che sono degli strumenti di diagnostica in grado di misurare le proprietà fascio elettronico, in particolare la lunghezza del banco di elettroni e lo spazio longitudinale di fase.
The Free Electron Laser (FEL) is a fourth generation light source that has more stringent specifications with respect to the third generation light sources, such as synchrotrons. The so-called emittance and the beam trajectory determine the beam quality, and must satisfy stringent requirements in FELs. For example, in the undulator hall, the beam position must be measured with the micrometer resolution. The control in the beam position can be achieved using a cavity beam position monitor (Cavity BPM). This thesis describes the research performed on the cavity BPM. Precisely, the electromagnetic design, the simulation and the optimization of a cavity BPM have been carried out. Subsequently, 25 cavity BPMs have been manufactured and installed in the undulator hall of the FERMI@Elettra project. A new RF front-end has been set up, and a series of measurements have been performed. The second device studied in this PhD is the travelling wave linear accelerator. Traditional accelerating structures endowed with a single feed coupler cause degradation of the electron beam properties, due to the electromagnetic field asymmetry. A new type of single feed structure with movable short circuit is proposed, where the electric field has been symmetryzed. The electromagnetic design, simulation and optimization of the device have been carried out, and a prototype of the accelerating structure has been produced and tuned. The electric field has been measured with the bead-pull method. Finally, in this thesis are described the High Energy RF Deflector (HERFD), which are a fundamental diagnostic tool to measure the electron beam properties, in particular the bunch length and the longitudinal phase space.
XXV Ciclo
1984
Swinson, Christina Jane. "Development of beam position monitors for final focus systems at the International Linear Collider." Thesis, University of Oxford, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.533884.
Full textGarcía, Garrigós Juan José. "Development of the Beam Position Monitors for the Diagnostics of the Test Beam Line in the CTF3 at CERN." Doctoral thesis, Universitat Politècnica de València, 2013. http://hdl.handle.net/10251/34327.
Full textGarcía Garrigós, JJ. (2013). Development of the Beam Position Monitors for the Diagnostics of the Test Beam Line in the CTF3 at CERN [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/34327
TESIS
Tomás, García Rogelio. "Direct measurement of resonance driving terms in the super proton synchrotron (SPS) of cern using beam position monitors." Doctoral thesis, Universitat de València, 2003. http://hdl.handle.net/10803/9879.
Full textThe aim of this thesis is to develop a beam based method to measure the Hamiltonian terms of an accelerator by precise Fast Fourier Transform (FFT) of turn-by-turn beam position data. The effect of beam decoherence on the turn-by-turn Fourier spectrum and the longitudinal variation of the resonance terms are studied analytically and via computer simulations. Experiments to validate the proposed technique are performed at the CERN SPS and at the RHIC of BNL. Finally, the improvement of replacing the single kicks by an AC dipole is analytically described
Bhatt, Heeral. "Design and Development of the Beam Position Monitor Calibration Test Bench : For testing the electrical parameters of the new High Luminosity Large Hadron Collider (HL-LHC) Beam Position Monitors using the Concurrent Engineering Approach." Thesis, Luleå tekniska universitet, Rymdteknik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-81200.
Full textZhang, Pei. "Beam position diagnostics with higher order modes in third harmonic superconducting accelerating cavities." Thesis, University of Manchester, 2013. https://www.research.manchester.ac.uk/portal/en/theses/beam-position-diagnostics-with-higher-order-modes-in-third-harmonic-superconducting-accelerating-cavities(587aa24b-8adc-4bc6-8f5c-475aa0028d06).html.
Full textBook chapters on the topic "Cavity beam position monitors"
Minty, Michiko G., and Frank Zimmermann. "Orbit Measurement and Correction." In Particle Acceleration and Detection, 69–98. Berlin, Heidelberg: Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-662-08581-3_3.
Full textWang, Kai, Kedong Wang, Kun Zhu, Huilin Ge, Xicheng Xie, Tingru Zhu, Hao Wang, et al. "Cavity BPM Design for Laser-Driven Proton Therapy Facility." In Advances in Transdisciplinary Engineering. IOS Press, 2022. http://dx.doi.org/10.3233/atde221163.
Full textConference papers on the topic "Cavity beam position monitors"
Lorenz, Ronald. "Cavity beam position monitors." In The eighth beam instrumentation workshop. AIP, 1998. http://dx.doi.org/10.1063/1.57039.
Full textWalston, S., C. Chung, P. Fitsos, J. Gronberg, M. Ross, O. Khainovski, Y. Kolomensky, et al. "Resolution of a high performance cavity beam position monitor system." In 2007 IEEE Particle Accelerator Conference. IEEE, 2007. http://dx.doi.org/10.1109/pac.2007.4440059.
Full textWaldschmidt, G., R. Lill, and L. Morrison. "Electromagnetic design of the RF cavity beam position monitor for the LCLS." In 2007 IEEE Particle Accelerator Conference (PAC). IEEE, 2007. http://dx.doi.org/10.1109/pac.2007.4441013.
Full textKim, Jin-Soo. "Design of a Standing-Wave Multi-Cavity Beam-Monitor for Simultaneous Beam Position and Emittance Measurements." In ADVANCED ACCELERATOR CONCEPTS: Eleventh Advanced Accelerator Concepts Workshop. AIP, 2004. http://dx.doi.org/10.1063/1.1842568.
Full textGhigo, A., F. Sannibale, M. Serio, and C. Vaccarezza. "The DAɸNE beam position monitors." In Beam instrumentation. AIP, 1997. http://dx.doi.org/10.1063/1.52290.
Full textJohnson, Jeff. "DARHT AXIS II Beam Position Monitors." In BEAM INSTRUMENTATION WORKSHOP 2004: Eleventh Beam Instrumentation Workshop. AIP, 2004. http://dx.doi.org/10.1063/1.1831163.
Full textBarr, D. "LEDA beam diagnostics instrumentation: Beam position monitors." In The ninth beam instrumentation workshop. AIP, 2000. http://dx.doi.org/10.1063/1.1342601.
Full textVismara, Giuseppe. "Signal processing for beam position monitors." In The ninth beam instrumentation workshop. AIP, 2000. http://dx.doi.org/10.1063/1.1342578.
Full textUnser, Klaus B. "New generation electronics applied to beam position monitors." In Beam instrumentation. AIP, 1997. http://dx.doi.org/10.1063/1.52329.
Full textYe, K., L. Ma, and H. Huang. "The calibration of BEPC beam position monitors." In The eighth beam instrumentation workshop. AIP, 1998. http://dx.doi.org/10.1063/1.57011.
Full textReports on the topic "Cavity beam position monitors"
Johnson, R. AN X-BAND CAVITY FOR A HIGH PRECISION BEAM POSITION MONITOR. Office of Scientific and Technical Information (OSTI), December 2003. http://dx.doi.org/10.2172/826577.
Full textBarry, W. Inductive megahertz beam position monitors for CEBAF. Office of Scientific and Technical Information (OSTI), January 1989. http://dx.doi.org/10.2172/6360210.
Full textShen, X., M. Bai, and S. Y. Lee. Noise estimation of beam position monitors at RHIC. Office of Scientific and Technical Information (OSTI), February 2014. http://dx.doi.org/10.2172/1121843.
Full textRoss, Marc C. RF CAVITY BPM'S AS BEAM ANGLE AND BEAM CORRELATION MONITORS. Office of Scientific and Technical Information (OSTI), May 2003. http://dx.doi.org/10.2172/813157.
Full textEkdahl, Carl, and William Broste. Correcting Magnetic-Field Diffusion Effects in Beam Position Monitors. Office of Scientific and Technical Information (OSTI), July 2022. http://dx.doi.org/10.2172/1879354.
Full textRussell, S. J., J. D. Gilpatrick, J. F. Power, and R. B. Shurter. Characterization of beam position monitors for measurement of second moment. Office of Scientific and Technical Information (OSTI), May 1995. http://dx.doi.org/10.2172/72985.
Full textEkdahl, Carl, William Broste, and Jeffrey Johnson. Magnetic-Field Diffusion Effects in Beam Position Monitors I: Theory. Office of Scientific and Technical Information (OSTI), July 2022. http://dx.doi.org/10.2172/1876769.
Full textMcCrady, Rodney Craig. Algorithm for Beam Position and Phase Monitors in the LANSCE Linac. Office of Scientific and Technical Information (OSTI), June 2015. http://dx.doi.org/10.2172/1186032.
Full textKahana, E., and Y. Chung. Commissioning results of the APS storage ring rf beam position monitors. Office of Scientific and Technical Information (OSTI), July 1996. http://dx.doi.org/10.2172/270783.
Full textShu, D., J. Barraza, T. M. Kuzay, G. Naylor, and P. Elleaume. Tests of the APS X-ray transmitting beam position monitors at ESRF. Office of Scientific and Technical Information (OSTI), October 1997. http://dx.doi.org/10.2172/555513.
Full text