Relevant bibliographies by topics / Casting alloys

Academic literature on the topic 'Casting alloys'

Author: Grafiati
Published: 10 December 2022
Last updated: 29 January 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Casting alloys.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Casting alloys"

1

Daswa, Pfarelo, Heinrich Moller, and Gonasagren Govender. "Overageing Characteristics of Alloy A356 and Al-Mg-Si Casting Alloys." Solid State Phenomena 285 (January 2019): 75–80. http://dx.doi.org/10.4028/www.scientific.net/ssp.285.75.

Full text
Abstract:
Al-Si-Mg casting alloys, such as Al-7Si-0.3Mg alloy A356, are heat treatable and can be precipitation hardened to the T6 temper condition. However, Al-Mg-Si casting alloys (5xx series) are generally not considered to be heat treatable. These 5xx series castings are known for good castability and good resistance to corrosion, especially in marine environments. This paper investigates the extent to which 5xx series alloys could possibly be artificially aged. The influences of artificial ageing time on the overageing characteristics of both Al-Mg-Si and A356 casting alloys have been studied. A356 aluminium alloy castings were produced using the CSIR rheo-high pressure die casting process (R-HPDC). Al-Mg-Si alloys were cast using permanent mould casting. The rate of overageing of these alloys is of importance for potential higher temperature applications. The overageing characteristics of Al-Mg-Si and A356 aluminium alloys have been investigated at an artificial ageing temperature of 190°C for ageing times up to 128 hours. It is shown that the rate of overageing of Al-Mg-Si casting alloys is lower than for alloy A356. This could possibly result in the use of these alloys in applications at temperatures that are higher than where alloy A356 can be employed. It also allows the possibility of using the 5xx series alloys as an alternative to other Al-alloys for R-HPDC applications.
APA, Harvard, Vancouver, ISO, and other styles
2

Znamenskii, L. G., A. N. Franchuk, and A. A. Yuzhakova. "Nanostructured Materials in Preparation Casting Alloys." Materials Science Forum 946 (February 2019): 668–72. http://dx.doi.org/10.4028/www.scientific.net/msf.946.668.

Full text
Abstract:
The article deals with technologies of refining and inoculating casting alloys with the use of nanostructured diamond powder, as well as stimulation technique on molten metal including processing of the liquid alloy with nanosecond electromagnetic pulses. The developed method of cast iron inoculation allows to eliminate the flare and to increase the physical and mechanical properties of the castings through the grain refining and the decrease of chilling tendency during crystallization of the liquid alloy. Inoculating of aluminium alloys by high-melting particles of a nanostructured diamond powder leads to the grinding of structural constituents, including conditions for dispersing hardening intermetallics during postbaking of such castings. As a result, foundry and physicomechanical properties of castings are significantly improved.
APA, Harvard, Vancouver, ISO, and other styles
3

Szymczak, T., G. Gumienny, I. Stasiak, and T. Pacyniak. "Hypoeutectic Al-Si Alloy with Cr, V and Mo to Pressure Die Casting." Archives of Foundry Engineering 17, no. 1 (March 1, 2017): 153–56. http://dx.doi.org/10.1515/afe-2017-0028.

Full text
Abstract:
Abstract This paper presents the results of hypoeutectic 226 grade alloy as well as prepared on its basis Al-Si alloy containing Cr, V and Mo. The additives tested were added as AlCr15, AlV10 and AlMo8 master alloys. Alloys tested were poured into DTA sampler as well as using pressure die casting. An amount of Cr, V and Mo additives in alloy poured into DTA sampler comprised within the range approximately 0.05-0.35%. Alloys to pressure die casting contained 0.05-0.20% Cr, V and Mo. The crystallization process was examined using the derivative thermal analysis (DTA). The microstructure of castings made in the DTA sampler as well as castings made with use of pressure die casting were examined. The basic mechanical properties of castings made using pressure die casting were defined too. It has been shown in the DTA curves of Al-Si alloy containing approximately 0.30 and 0.35% Cr, Mo, and V there is an additional thermal effect probably caused by a peritectic crystallization of intermetallic phases containing the aforementioned additives. These phases have a morphology similar to the walled and a relatively large size. The analogous phases also occur in pressure die casting alloys containing 0.10% or more additions of Cr, V and Mo. The appearance of these phases in pressure die casting Al-Si alloys coincides with a decrease in the value of the tensile strength Rm and the elongation A. It has been shown die castings made of Al-Si alloys containing the aforementioned additives have a higher Rm and A than 226 alloy.
APA, Harvard, Vancouver, ISO, and other styles
4

Vanko, Branislav, Ladislav Stanček, Michal Čeretka, Eduard Sedláček, and Roman Moravčík. "Properties of EN AW-2024 Wrought Aluminum Alloy after Casting with Crystallization under Pressure." Scientific Proceedings Faculty of Mechanical Engineering 23, no. 1 (December 1, 2015): 58–65. http://dx.doi.org/10.1515/stu-2015-0009.

Full text
Abstract:
Abstract Establishing of wrought aluminum alloys casting to manufacture is now a global trend, for example due to lower production costs compare to forging or due to the ability to produce parts with thinner sections and more complex shapes. The aim of using these alloys in the foundry industry is in particular the creation of castings with higher mechanical properties than achieve castings made of standard casting aluminum alloys. Most often are cast wrought aluminum alloys of the 2xxx, 6xxx and 7xxx series. In the experiment, an alloy EN AW-2024 has been cast by modified technology of casting with crystallization under pressure. They were measured basic mechanical properties of the castings in the as-cast state and after heat treatment.
APA, Harvard, Vancouver, ISO, and other styles
5

Gavariev, Renat V., and Ksenia N. Gavarieva. "Features of Casting Magnesium Alloys in Chill Mold." Materials Science Forum 1052 (February 3, 2022): 287–91. http://dx.doi.org/10.4028/p-679e24.

Full text
Abstract:
The article describes the features of the casting process in the chill mold of magnesium alloys. The main factors affecting the quality of the castings obtained are indicated. The main defects of magnesium castings obtained by chill mold casting, as well as possible ways to eliminate them, are revealed. Options for improving the efficiency of the casting process by optimizing the process parameters are proposed, as well as options for heat treatment that increase the physical and mechanical properties of ready-made castings are presented.
APA, Harvard, Vancouver, ISO, and other styles
6

Znamenskij, Leonid G., O. V. Ivochkina, and Aleksey S. Varlamov. "Economical Ceramic Molds in Investment Casting." Materials Science Forum 843 (February 2016): 208–12. http://dx.doi.org/10.4028/www.scientific.net/msf.843.208.

Full text
Abstract:
Ceramic corundum molds on hydrolysed ethyl silicate solution which have insufficient inertness to poured alloys are widely used in the production of castings from reactive metals alloys. This is due to the presence of free silica, which is a strong oxidant of such alloy components as aluminium and titanium in vacuum conditions, in the form of a high content. To solve the indicated problem using aluminium-borophosphate concentrate, chemically cured with periclase, as a silica free binder of ceramic corundum molds was suggested. The use of the combination of the indicated mold materials allows not only enabling chemical inertness of the molds, but also operating the process of mold forming. The developed technology provides the acceleration of the mold manufacturing cycle in 4...6 times, the increase the strength of the mold covers, the reduction in the heat-resistant alloy casting cost. It enables significant improvement of the quality and increase of the economic efficiency of manufacturing of precision casting from reactive metals and alloys.
APA, Harvard, Vancouver, ISO, and other styles
7

Newman, Lee S. "CASTING ALLOYS." Journal of the American Dental Association 128, no. 5 (May 1997): 550. http://dx.doi.org/10.14219/jada.archive.1997.0250.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wataha, John C., and Regina L. Messer. "Casting alloys." Dental Clinics of North America 48, no. 2 (April 2004): 499–512. http://dx.doi.org/10.1016/j.cden.2003.12.010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Adamiec, Janusz. "The Quantitative Assessment of the Fracture Profile of Magnesium Alloy QE22 Welded Joint." Solid State Phenomena 197 (February 2013): 215–20. http://dx.doi.org/10.4028/www.scientific.net/ssp.197.215.

Full text
Abstract:
Magnesium alloys are a part of a group of lightweight and ultra-lightweight alloys, which are important in practical use in constructions. QE22 casting magnesium alloy containing silver, rare earth elements and zirconium is characterized by creep resistance up to the temperature of 200 °C, while during a short exposure it can resist up to the temperature of 250°C. Nowadays, QE22 magnesium alloy are used for casting into sand moulds. In castings of magnesium alloys defects or inconsistencies (such as casting misruns, porosities and cracks) often appear, particularly in huge dimensional castings. Such defects are repaired with the use of padding and welding. Welded joints must ensure suitable operational properties, mainly in terms of creep, so that the repaired casting can work under the same conditions as the correct cast. The basic source of information about the cause and cracking propagation is fracture after creep test. The quantitative fractography, in particular profilomety, allows to describe the fracture and basis on it conclude the causes of destruction. In this paper quantitative procedure for assessing the fracture profile of QE22 welded joints after creep test was worked out. Base on its analysis result, it was found that creep resistant of the QE22 joints is determined by eutectic areas, therefore they must be heat treated after welding joints.
APA, Harvard, Vancouver, ISO, and other styles
10

FUJITA, Masato. "Casting and die castings of aluminum alloys." Journal of Japan Institute of Light Metals 39, no. 9 (1989): 664–83. http://dx.doi.org/10.2464/jilm.39.664.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Casting alloys"

1

Cockfield, Tracey J. "Twin-roll casting of aluminium eutectic alloys." Thesis, University of Oxford, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.270607.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Keeble, J. M. "Grain refinement of A17Si shaped casting alloys." Thesis, Swansea University, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.637769.

Full text
Abstract:
An investigation was undertaken to clarify the effects of various grain refiners on primary grain size of A17Si type alloys. By observing the influence of master alloy grain refiners containing B, Ti, Ti and B, and Ti and C under controlled casting conditions (constant holding temperature of 750°C, cast into graphite moulds held at room temperature) with variations in holding time, addition levels and Ti:B ratios, it was possible to achieve a greater degree of understanding as to the required additions to attain desired refinement levels in the casting house. Two types of test were carried out. Firstly, two minute grain refiner tests, where the samples were taken from the melt two minutes after grain refiner addition. These tests were used to establish the effects of; increasing Si content from 0 to 7wt% (in the absence of grain refiner and with grain refiner additions of Al-Ti and A15Ti1B at a number of addition levels) and increasing addition level of Ti, B, Ti and B, and Ti and C on the primary grain size of A17Si. The second type of test established the influence on grain refinement, using additions of Ti, B, Ti and B, and Ti and C, of various holding times up to two hours. The effect on grain size of varying Ti:B ratio was also studied using master alloys containing both Ti and B with various ratios and also by making additions of Al-Ti and A1-B refiners. From the fade tests it has been found that, with additions of A1-Ti refiners, levels of Ti above the peritectic TiA13 level give best refinement with virtually no fade observed at any of the additional levels studied. For the two addition levels of AlTiC studied, grain size increases over holding time and decreases on stirring the melt after the two hour holding period, suggesting some nucleant particle settling. With Ti and B containing refiners, those with ratios of Ti to B < 2.2:1 produce finer primary grains sizes at given B levels with a reduced tendency to fade. Addition levels of 0.02wt%B or more produce finer grain sizes than lower addition levels due to increased numbers of nucleants, reducing observed effects of nucleant settling by ensuring sufficient B containing particles are in the melt to achieve adequate grain refinement even after a two hour holding period.
APA, Harvard, Vancouver, ISO, and other styles
3

Saleem, Muhammad Qaiser. "Helium Assisted Sand Casting of Aluminum Alloys." Digital WPI, 2011. https://digitalcommons.wpi.edu/etd-dissertations/204.

Full text
Abstract:
Sand casting is the most widely used casting process for both ferrous and non-ferrous alloys; however, the process is marred by large grain size structures and long solidification times. The coarser microstructure has a negative effect on the mechanical properties of the cast components and the long processing time affects the overall productivity of the process. The research reported herein addresses these problems for aluminum sand castings by enhancing the rate of heat extraction from the casting by replacing air, which is typically present in the pores of the sand mold and has a relatively low thermal conductivity by helium which has a thermal conductivity that is at least five times that of air in the temperature range of interest. The effect of (1) the flow rate of helium, (2) the way in which it is introduced into the mold, and (3) the mold design on (a) the average grain size, (b) the secondary dendrite arm spacing, and (c) the room temperature tensile properties of castings is investigated and compared to their counterparts produced in a typical sand casting process. In addition, a cost analysis of the helium-assisted sand casting process is performed and an optimum set of parameters are identified. It is found that when the helium-assisted sand casting process is performed with close to the optimum parameters it produces castings that exhibit a 22 percent increase in ultimate tensile strength and a 34 percent increase in yield strength with no significant loss of ductility, no degradation in the quality of the as-cast surfaces, and no significant increase in the overall cost.
APA, Harvard, Vancouver, ISO, and other styles
4

Kalkanli, Ali. "Investigations of melt overflow of alloys." Thesis, Open University, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.293674.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Pan, Qingyu. "Green & Clean Al-Cu Alloys." Digital WPI, 2018. https://digitalcommons.wpi.edu/etd-theses/1273.

Full text
Abstract:
For aluminum alloy casting, degassing is a necessary step for molten metal, which can extract the dissolved hydrogen in the melt. For copper-containing aluminum alloys, a traditional method is that using the mixed gas of inert gas and chlorine as the degassing agent. Because of the toxicity of the gaseous chlorine, the industrial is trying to avoid using it even though this method can contribute to good castings. As a potential solution, the foundry only used argon during degassing, however, the castings with this method were unacceptable since the occurrence of defects. The goal of this project is to develop a new green and clean degassing method for copper- containing alloys without the usage of gaseous chlorine. To achieve this goal, identify those defects and figure out the source of those defects are necessary. Totally four hypotheses of the occurrence of defects were supposed and two of them were discussed in this thesis. They are ineffective hydrogen removal and metal-mold reaction. Experiments were set in WPI and Palmer Foundry to investigate defects from samples with different conditions. This thesis collected and discussed the results from experiments, and made the conclusion that whether these two hypotheses contribute to the occurrence of defects.
APA, Harvard, Vancouver, ISO, and other styles
6

Tenekedjiev, Nedeltcho. "Strontium treatment of aluminum : 17% silicon casting alloys." Thesis, McGill University, 1989. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=61774.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Musson, Nicholas John. "The squeeze casting of aluminium alloys and composites." Thesis, University of Southampton, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.293609.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Cheng, Xu. "Inert refractory systems for casting of titanium alloys." Thesis, University of Birmingham, 2012. http://etheses.bham.ac.uk//id/eprint/3838/.

Full text
Abstract:
Research has been undertaken to develop new yttria slurry systems for use in mould face coats for investment casting TiAl alloy, solving the pre-gelation problems of commercial yttria slurry systems to increase slurry life. Meanwhile, the new face coats should also have excellent sintering properties, chemical inertness, surface finish and be easy to prepare. The processes of developing the new slurry started with the filler powder investigation by adding different sintering additives into the yttria powder to achieve good sintering properties. Then the best filler powder candidates were selected to make the slurry. Finally, the new face coat slurries were used to make the shell face coat and the chemical inertness of those shells were investigated through the sessile drop and investment casting. In the research, the filler powder and face coat sintering properties were quantified through density, dilatometer testing, X-ray diffraction (XRD) and microstructural change at different testing temperatures. The interaction of different face coat systems and the metal were identified using hardness tests, sessile drop contact angle and the microstructural change at the metal/shell interface. In this research, three water-based binder face coat systems containing YF\(_3\), Y\(_2\)O\(_3\)+0.5wt% Al\(_2\)O\(_3\)+ 0.5 wt% ZrO\(_2\) (YAZ), and B\(_2\)O\(_3\) additives were found to have similar or even better sintering properties compared to a commercial face coat. Meanwhile, they had long life.
APA, Harvard, Vancouver, ISO, and other styles
9

Maeder-Siryj, Agnes. "Inhibition of cell proliferation by dental casting alloys /." [S.l.] : [s.n.], 2001. http://www.ub.unibe.ch/content/bibliotheken_sammlungen/sondersammlungen/dissen_bestellformular/index_ger.html.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Deez, Brent Steven. "An investigation on the suitability of layer manufacturing methods for rapid tooling development in investment casting of light metal alloys." Thesis, Cape Peninsula University of Technology, 2010. http://hdl.handle.net/20.500.11838/2228.

Full text
Abstract:
Thesis (MTech (Mechanical Engineering))--Cape Peninsula University of Technology, 2010.
The research presented in this report focuses on Investment Casting capabilities for light metal alloys in South Africa and forms part of the Advanced Manufacturing Technology Strategy's (AMTS): Light Weight Metals flagship programme. The research is centred on the suitability of rapid prototyping (RP)/Iayer manufacturing (LM) methods to produce patterns for the investment casting of aluminium (AI), magnesium (Mg) and titanium (Ti) alloys, together known as Rapid Investment Casting. Three core RP technologies are investigated namely: Three Dimensional Printing - Drop-on-Bed from Z-corporation, Three Dimensional Printing - Drop-on- Drop from ThermoJet - 3D Systems and Selective Laser Sintering from EOS. Various RP/LM processes are discussed in detail and highlight the technologies selected in this study. A standard benchmark part, adapted from the European project framework FP6, designed and utilised in similar studies is used as the basis for the research. The Investment Casting process is discussed fully and compared to the Rapid Investment Casting, listing both the advantages and disadvantages of the above mentioned methods. In addition a special study has been conducted on investment casting of large components using layer manufactured patterns. This study not only helped to establish and validate the shrinkage value calculated for the aluminium castings but also showed substantial capability lacks in SA foundries to handle this type of components, which are by definition most often of high added value.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Casting alloys"

1

A, Belov N., and Glazoff Michael V, eds. Casting aluminum alloys. Amsterdam: Elsevier Science, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

1950-, Cheng Shu-hong, and Mobley Carroll E. 1941-, eds. A fractography atlas of casting alloys. Columbus, Ohio: Battelle Press, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Adefuye, Adefolabi Olusegun. Fluidity of aluminium-silicon casting alloys. Birmingham: University of Birmingham, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Grandfield, John F., Dmitry G. Eskin, and Ian F. Bainbridge, eds. Direct-Chill Casting of Light Alloys. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118690734.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Casting. Materials Park, OH: ASM International, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Melting & casting aluminium [sic.]. Bradley, Il: Lindsay Publications, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ružbarský, Juraj. Al-Si Alloys Casts by Die Casting. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-25150-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Process Technology Conference (13th 1995 Nashville, TN). 13th Process Technology Conference proceedings: Continuous casting. Warrendale, Pa: Iron and Steel Society, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Eskin, D. G. Physical metallurgy of direct chill casting of aluminum alloys. Boca Raton: Taylor & Francis, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hamed, Q. S. Microstructure and mechanical properties of Al-Si casting alloys. Manchester: UMIST, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Casting alloys"

1

Robles Hernandez, Francisco C., Jose Martin Herrera Ramírez, and Robert Mackay. "Metal Casting Process." In Al-Si Alloys, 49–81. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-58380-8_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Straatsma, E. N., W. H. Kool, and L. Katgerman. "Single-roll Strip Casting of Aluminium Alloys." In Continuous Casting, 77–81. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/3527607331.ch11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Greer, A. L., and A. Tronche. "Modeling of Grain Refinement in Aluminum Alloys." In Continuous Casting, 149–53. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/3527607331.ch22.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bach, Fr W., M. Hepke, and A. Rossberg. "New Strip Casting Process for Magnesium Alloys." In Continuous Casting, 81–86. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/9783527607969.ch9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Stuczyński, Tomasz, and Marzena Lech-Grega. "Grain Refinement Process in Aluminium Alloys Type AlZnMgZr." In Continuous Casting, 224–32. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/3527607331.ch33.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Krug, P., and B. Commandeur. "Spray Forming of Advanced High Strength Aluminum Alloys." In Continuous Casting, 101–5. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/9783527607969.ch12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ruvalcaba, D., D. Eskin, L. Katgerman, and J. Kiersch. "Quenching Study on the Solidification of Aluminum Alloys." In Continuous Casting, 290–95. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/9783527607969.ch40.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Nicolai, H. P., and Chr Liesner. "Investment Casting of Titanium." In Titanium and Titanium Alloys, 263–71. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2005. http://dx.doi.org/10.1002/3527602119.ch9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Schumacher, P. "Nucleation Studies of Grain Refiner Particles in Al-Alloys." In Continuous Casting, 211–17. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/3527607331.ch31.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Lebreton, V., F. Sadi, and Y. Bienvenu. "Continuous Casting of Tin Containing Alloys and their Transformation." In Continuous Casting, 320–25. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/9783527607969.ch44.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Casting alloys"

1

Mihaichuk, William, and Michael L. Bess. "The ZA Die Casting Alloys." In SAE International Congress and Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1986. http://dx.doi.org/10.4271/860556.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Albright, D. L., and C. Suman. "Understanding Corrosion in Magnesium Die Casting Alloys." In SAE International Congress and Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1988. http://dx.doi.org/10.4271/880510.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Givertz, Alisa C. "Zinc Casting Alloys—A Comparative Properties Analysis." In Passenger Car Meeting & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1987. http://dx.doi.org/10.4271/871953.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Albright, Darryl L., and Terje Kr Aune. "Stress Relaxation Behavior of Die Casting Alloys." In International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1991. http://dx.doi.org/10.4271/910412.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Aune, Terje Kr, and Håkon Westengen. "Property Update on Magnesium Die Casting Alloys." In International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1995. http://dx.doi.org/10.4271/950424.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ilotte, Vincenzo. "Innovative Alloys for High Pressure Die Casting." In SAE World Congress & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2009. http://dx.doi.org/10.4271/2009-01-0552.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Gertsberg, G., O. Bar Yosef, B. Bronfin, N. Fantetti, and N. Moscovitch. "Recycling Technology Guidelines of MRI Die Casting Alloys." In SAE World Congress & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2008. http://dx.doi.org/10.4271/2008-01-0376.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hanna, M. D., and M. S. Rashid. "ACuZinc: Improved Zinc Alloys for Die Casting Applications." In International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1993. http://dx.doi.org/10.4271/930788.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Aune, Terje Kr, and Thomas J. Ruden. "High Temperature Properties of Magnesium Die Casting Alloys." In International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1992. http://dx.doi.org/10.4271/920070.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Chirita, G., I. Stefanescu, D. Soares, D. Cruz, F. S. Silva, Glaucio H. Paulino, Marek-Jerzy Pindera, et al. "Centrifugal Casting Features∕Metallurgical Characterization of Aluminum Alloys." In MULTISCALE AND FUNCTIONALLY GRADED MATERIALS 2006. AIP, 2008. http://dx.doi.org/10.1063/1.2896847.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Casting alloys"

1

Makhlouf M. Makhlouf and Diran Apelian. Casting Characteristics of Aluminum Die Casting Alloys. Office of Scientific and Technical Information (OSTI), February 2002. http://dx.doi.org/10.2172/792701.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kobryn, Pamela A. Casting of Titanium Alloys. Fort Belvoir, VA: Defense Technical Information Center, February 1996. http://dx.doi.org/10.21236/ada312008.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Schwam, David. Casting Porosity-Free Grain Refined Magnesium Alloys. Office of Scientific and Technical Information (OSTI), August 2013. http://dx.doi.org/10.2172/1097772.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Dr. Geoffrey K. Sigworth. Development Program for Natural Aging Aluminum Casting Alloys. Office of Scientific and Technical Information (OSTI), May 2004. http://dx.doi.org/10.2172/840824.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

M. M. Makhlouf, D. Apelian, and L. Wang. Microstructures and properties of aluminum die casting alloys. Office of Scientific and Technical Information (OSTI), October 1998. http://dx.doi.org/10.2172/751030.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Jackson, R. J. Vacuum-induction melting, refining, and casting of uranium and its alloys. Office of Scientific and Technical Information (OSTI), October 1989. http://dx.doi.org/10.2172/5251555.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Huber, Zachary. Development of Casting Techniques for d-phase Uranium-Zirconium Alloys - CRADA 524. Office of Scientific and Technical Information (OSTI), September 2021. http://dx.doi.org/10.2172/1867281.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Nyberg, Eric, Vineet Joshi, Curt Lavender, Dean Paxton, and Douglas Burkes. The Influence of Casting Conditions on the Microstructure of As-Cast U-10Mo Alloys: Characterization of the Casting Process Baseline. Office of Scientific and Technical Information (OSTI), December 2013. http://dx.doi.org/10.2172/1163444.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hosch, Timothy. Solidification, growth mechanisms, and associated properties of Al-Si and magnesium lightweight casting alloys. Office of Scientific and Technical Information (OSTI), January 2010. http://dx.doi.org/10.2172/985316.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Brady, M. P., Y. Yamamoto, and J. H. Magee. Manufacture of Alumina-Forming Austenitic Steel Alloys by Conventional Casting and Hot-Working Methods. Office of Scientific and Technical Information (OSTI), March 2009. http://dx.doi.org/10.2172/958121.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Casting alloys' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography