Relevant bibliographies by topics / Capability of the measurement system

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Capability of the measurement system'

Author: Grafiati
Published: 28 June 2021
Last updated: 14 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Capability of the measurement system.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Capability of the measurement system"

1

Persijn, Marcel, and Yves Van Nuland. "RELATION BETWEEN MEASUREMENT SYSTEM CAPABILITY AND PROCESS CAPABILITY." Quality Engineering 9, no. 1 (January 1996): 95–98. http://dx.doi.org/10.1080/08982119608919020.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mustapha, Ghazirah, M. Saiful Aizat Shafie, Nur Hayati M. Yahaya, and Jamaluddin Mahmud. "Measurement System Analysis of VS Lite." Applied Mechanics and Materials 680 (October 2014): 447–50. http://dx.doi.org/10.4028/www.scientific.net/amm.680.447.

Full text
Abstract:
Virtual Sensei Lite (VS Lite) is an inexpensive user-friendly motion analysis system. As an alternative motion capture system, it is a must for VS Lite’s user to assess the accuracy of the measurement system capability. To date, such analysis to observe the reliability and accuracy of VS Lite has not been reported. Therefore, this study proposes a procedure for assessing the accuracy and capability of the Virtual Sensei Lite using ANOVA Gage Repeatability and Reproducibility (Gage R&R) designed experiments. In this procedure, a gage R&R study is conducted to obtain replicate measurements on nine parts by three operators. The total variation due to measurement error is then observed to identify the accuracy of measurement. The study able to demonstrate on the accuracy of VS Lite as the value of total variation due to measurement error is within 10%-30%.
APA, Harvard, Vancouver, ISO, and other styles
3

Orr, B. G., and A. M. Goldman. "Ultrahigh‐vacuum evaporation system with low‐temperature measurement capability." Review of Scientific Instruments 56, no. 6 (June 1985): 1288–90. http://dx.doi.org/10.1063/1.1137994.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Jiang, Li, and Martin Feldman. "A prototype optical encoder system with nanometer measurement capability." Journal of Modern Optics 57, no. 13 (July 20, 2010): 1150–56. http://dx.doi.org/10.1080/09500340.2010.500105.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yang, Yan, and Boseon Kang. "Enhanced measurement capability of a digital particle holographic system for flow field measurements." Flow Measurement and Instrumentation 22, no. 5 (October 2011): 461–68. http://dx.doi.org/10.1016/j.flowmeasinst.2011.07.001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Rodríguez-García, Luis, Sandra Pérez-Londoño, and Juan Mora-Flórez. "Measurement-based exponential recovery load model: development and validation." DYNA 82, no. 192 (August 25, 2015): 131–40. http://dx.doi.org/10.15446/dyna.v82n192.48588.

Full text
Abstract:
<p>Load modeling is an important task in power system stability analysis and control. Taking this into account, the development of dynamic load models using a measurement-based load modeling strategy and an improved particle swarm optimization algorithm is presented in this paper. To accomplish this objective, a measurement-based parameter estimation method is used for identification of an exponential recovery load model. Measurements are obtained performing dynamic simulation of an IEEE 30-bus test system under several disturbances, and additionally, cross validation technique is applied for an analysis of load model generalization capability. An adequate load modeling improves the comprehension of load behavior and the capability of reproduce transient events on power systems.</p>
APA, Harvard, Vancouver, ISO, and other styles
7

McNEESE, WILLIAM H., and ROBERT A. KLEIN. "MEASUREMENT SYSTEMS, SAMPLING, AND PROCESS CAPABILITY." Quality Engineering 4, no. 1 (January 1991): 21–39. http://dx.doi.org/10.1080/08982119108918890.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Choi, Chul-Hyung, Young-Pil Kim, Si-Kyung Kim, Jeong-Bong You, and Bong-Gyun Seo. "Mobile ECG Measurement System Design with Fetal ECG Extraction Capability." Transactions of The Korean Institute of Electrical Engineers 66, no. 2 (February 1, 2017): 431–38. http://dx.doi.org/10.5370/kiee.2017.66.2.431.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Shi, Liangxing, Qiumeng He, Jingyuan Liu, and Zhen He. "A Modified Region Approach for Multivariate Measurement System Capability Analysis." Quality and Reliability Engineering International 32, no. 1 (September 11, 2014): 37–50. http://dx.doi.org/10.1002/qre.1724.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Deldossi, Laura, and Diego Zappa. "Confidence Intervals for Variance Components in Measurement System Capability Studies." Communications in Statistics - Theory and Methods 41, no. 16-17 (August 2012): 2932–43. http://dx.doi.org/10.1080/03610926.2011.589956.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Capability of the measurement system"

1

Behrman, Robert. "Structural Measurement Of Military Organization Capability." Research Showcase @ CMU, 2014. http://repository.cmu.edu/dissertations/373.

Full text
Abstract:
This research presents a structural model of the effect of the organization of military units upon their capability. This research is oriented towards a more complete understanding of military capability and policy decisions about the structure and development of military forces. We identify the types of national and military policy decisions that claims of military capability inform, and find that there are five distinct types of capability claims relevant to military policy. We show how these types of capability claims are logically related to each other, but have different premises, predicates, and standards of proof. We find that one of these types of claims, General Organization Capability Claims, ties together the various military policy decisions. The remainder of this research shows how these capability claims can be formally structured based on military doctrine and structurally evaluated using a network-science based model. The interaction between the structural elements of a military organization (personnel, materiel, and information) and the things it is supposed to do (military tasks) can be represented and analyzed with network science methods, and represents a type of general organization capability claim. We present a method for representing policy decisions about unit structure and tactical doctrine. We then develop two versions of a structural model of capability–one that links the individual elements of an organization to the tasks it performs; another that considers the capacity of a set of organizations to meet a set of requirements. We show that network statistics of organizations represented off of authoritative, rather than observational, data are still consistent with network science findings but require interpretation. We also show how alternate methods of aggregating organizations can expand the utility of the capability measurement. This research presents five new contributions to the fields of military policy analysis and network science–(1) a taxonomy of military capability claims, (2) a meta-network model of doctrinal organization and task data, (3) a structural model of organization capability, (4) a structural model of organization capacity, and (5) a network-based method integer programming method.
APA, Harvard, Vancouver, ISO, and other styles
2

Hultman, Victor. "Capability Study and Measurement System Analysis : A Case Study at Bosch Rexroth AB." Thesis, Luleå tekniska universitet, Institutionen för ekonomi, teknik och samhälle, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-170.

Full text
Abstract:
Measurement System Analysis helps, along with statistical methods, provide deep knowledge about the capability of a company’s measurement system. Through a better understanding of how measurement systems perform, companies can base decisions on facts to promote quality work. This study examines the capabilities of Measurement System Analysis and examines how well a test bench performs while testing motors at Bosch Rexroth AB in Mellansel. The study examines both the repeatability and the reproducibility of the measurement system, i.e., the variability that occurs when the same operator is doing repeated measurements on the same motor and when different operators perform measurements on the same motor. Bosch Rexroth AB manufactures high torque hydraulic motors. The case study covered the motor type CA 50, which is the most produced motor today at the company. The tests were made at one of the two existing test benches. The DMAIC method within Six Sigma was selected to get a structured workflow in the case study. Three parameters were examined for the motor type CA 50 – high pressure, external leaks, and cleanliness – and touched on Destructive Testing. It was clear from the Measurement System Analysis that the operators did not have a significant impact on the variability of the motor tests for any of the three parameters. The precision of the measurement system differed between the parameters. Concerning the parameter high pressure, the measurement system could be considered to be acceptable, but with room for improvement. The parameter external leaks showed an excellent measurement system with strong margins. The parameter cleanliness, however, showed an unacceptable measurement system. The capability study regarding the same three parameters showed different results. The parameter high pressure showed a decent capability (C_pk^ = 1.17). Parameter external leaks showed a high capability (C_pk^ = 1.17), but cleanliness showed a poor capability (C_pk^ = 1.09, 1.0 respectively 1.13) for the three different particle sizes 4µm, 6µm and 14µm. This thesis resulted in four main suggestions for improvement concerning both the test bench facility and motor type CA 50. The recommendations could help reduce the uncertainty in the measurements of the parameter cleanliness and the precision of the parameter high pressure. Furthermore, the thesis presents a suggestion on how outliers of parameter high pressure might be handled and suggestions for adjusted tolerances on the parameter external leaks.
APA, Harvard, Vancouver, ISO, and other styles
3

Johnson, Alastair Scott. "Building performance measurement systems to improve co-development capability." Thesis, Cranfield University, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.341035.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kawamura, T., M. Ohka, T. Miyaoka, and Y. Mitsuya. "Measurement of Human Tactile Sensation Capability to Discriminate Fine Surface Textures Using a Variable Step-height Presentation System." IEEE, 1996. http://hdl.handle.net/2237/7313.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Khatib, Abdel Rahman Amin. "Internet-based Wide Area Measurement Applications in Deregulated Power Systems." Diss., Virginia Tech, 2002. http://hdl.handle.net/10919/28579.

Full text
Abstract:
Since the deregulation of power systems was started in 1989 in the UK, many countries have been motivated to undergo deregulation. The United State started deregulation in the energy sector in California back in 1996. Since that time many other states have also started the deregulation procedures in different utilities. Most of the deregulation market in the United States now is in the wholesale market area, however, the retail market is still undergoing changes. Deregulation has many impacts on power system network operation and control. The number of power transactions among the utilities has increased and many Independent Power Producers (IPPs) now have a rich market for competition especially in the green power market. The Federal Energy Regulatory Commission (FERC) called upon utilities to develop the Regional Transmission Organization (RTO). The RTO is a step toward the national transmission grid. RTO is an independent entity that will operate the transmission system in a large region. The main goal of forming RTOs is to increase the operation efficiency of the power network under the impact of the deregulated market. The objective of this work is to study Internet based Wide Area Information Sharing (WAIS) applications in the deregulated power system. The study is the first step toward building a national transmission grid picture using information sharing among utilities. Two main topics are covered as applications for the WAIS in the deregulated power system, state estimation and Total Transfer Capability (TTC) calculations. As a first step for building this national transmission grid picture, WAIS and the level of information sharing of the state estimation calculations have been discussed. WAIS impacts to the TTC calculations are also covered. A new technique to update the TTC using on line measurements based on WAIS created by sharing state estimation is presented.
Ph. D.
APA, Harvard, Vancouver, ISO, and other styles
6

Polášek, Ondřej. "Metrologické charakteristiky měřícího ramene Hexagon Absolute Arm 83." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-442824.

Full text
Abstract:
This study analyzes current trends in metrology in the field of portable coordinate measuring machines and describes current methods for measurement system and process evaluation. Obtained knowledge is applied, in order to evaluate the capability of measurement system, which consists of articulated measurement arm and measurement standard.
APA, Harvard, Vancouver, ISO, and other styles
7

Szipka, Károly. "Modelling and Management of Uncertainty in Production Systems : from Measurement to Decision." Licentiate thesis, KTH, Skolan för industriell teknik och management (ITM), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-235825.

Full text
Abstract:
The advanced handling of uncertainties arising from a wide range of sources is fundamental in quality control and dependability to reach advantageous decisions in different organizational levels of industry. Es-pecially in the competitive edge of production, uncertainty shall not be solely object of estimation but the result of a systematic management process. In this process, the composition and utilization of proper in-formation acquisition systems, capability models and propagation tools play an inevitable role. This thesis presents solutions from production system to operational level, following principles of the introduced con-cept of uncertainty-based thinking in production. The overall aim is to support transparency, predictability and reliability of production sys-tems, by taking advantage of expressed technical uncertainties. On a higher system level, the management of uncertainty in the quality con-trol of industrial processes is discussed. The target is the selection of the optimal level of uncertainty in production processes integrated with measuring systems. On an operational level, a model-based solution is introduced using homogeneous transformation matrices in combination with Monte Carlo method to represent uncertainty related to machin-ing system capability. Measurement information on machining systems can significantly support decision-making to draw conclusions on man-ufactured parts accuracy, by developing understanding of root-causes of quality loss and providing optimization aspects for process planning and maintenance.

QC 20181015

APA, Harvard, Vancouver, ISO, and other styles
8

Ježková, Kateřina. "Aplikace statistické regulace procesu na nový produkt." Master's thesis, Vysoká škola ekonomická v Praze, 2008. http://www.nusl.cz/ntk/nusl-9362.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Eklund, Henrik, and Jacob Engström. "Ensuring high-quality production during commissioning and ramp-up : A case study at Northvolt." Thesis, Luleå tekniska universitet, Institutionen för ekonomi, teknik och samhälle, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-85130.

Full text
Abstract:
Rechargeable lithium-ion batteries (LIBs) have generated a shift in the automotive industry towards electric vehicles (EVs) instead of vehicles powered by fossil fuels. As a result, the demand for LIBs is only expected to grow in the future due to an increased demand for passenger EVs. Consequently, LIB manufacturers have to increase their production to meet the increasing demand. Northvolt is a Swedish LIB manufacturer founded in 2016, aiming to start the production of LIBs at the Northvolt Ett factory in Skellefteå during 2021. The Northvolt Ett factory will be one of the largest battery plants in Europe, supplying battery cells for both commercial and domestic use. Poorly manufactured battery cells can potentially cause hazardous events, such as fires or explosions, further supporting the need for high quality batteries. Consequently, requirements from customers and industry standards are high in terms of product quality control through e.g. measurement system analysis (MSA), statistical process control (SPC), and capability analysis. Furthermore, previous research has highlighted issues during commissioning and ramp-up of production, potentially occurring at Northvolt Ett.  The purpose of this study has been to describe how high-quality production can be ensured and maintained during and after commissioning. The study has been conducted as a qualitative case study at Northvolt Ett, focusing on qualification of the coating process. The basis for the study was to examine previous research on quality assurance from other industries, analyze automotive standards, and gather learnings from the pilot production at Northvolt Labs in Västerås. Unstructured interviews were conducted with Northvolt staff to understand what had previously been done related to quality assurance for Coating.  The learnings from Northvolt Labs highlighted a clear focus on preventive actions, such as establishing a Design-FMEA, Process-FMEA, and a Control Plan for the coating process. However, room for improvement was identified in terms of process improvement and control, since the lack of SPC has yielded unreliable results from the performed capability analysis. In addition, previous research has shown that preventive actions should be combined with actions for process improvement to reach full-scale production quickly. Thus, recommendations have been made for Northvolt to implement a clear strategy for product qualification through SPC and capability analysis, as a complement to the preventive actions. The recommendations include specific propositions for validation of the coating process and a general framework for process validation through MSA, SPC, and capability analysis. The presented recommendations can help Northvolt perform successful commissioning of the processes at Northvolt Ett and can also be useful for process validation in other manufacturing industries.
Laddningsbara litium-jon-batterier (LIB:s) har skapat en omställning i bilindustrin mot eldrivna fordon istället för fordon som drivs av fossila bränslen. Som en konsekvens väntas efterfrågan av LIB:s bara att öka i framtiden på grund av en ökad efterfrågan på eldrivna passagerarfordon. LIB-tillverkare måste därför öka sin produktion för att möta den växande efterfrågan. Northvolt är en svensk LIB-tillverkare som grundades 2016, med sikte på att starta produktionen av LIB:s vid fabriken Northvolt Ett i Skellefteå under 2021. Fabriken Northvolt Ett kommer att vara en av de största batterifabrikerna i Europa och leverera battericeller för både kommersiell och privat användning. Dåligt tillverkade battericeller kan potentiellt orsaka allvarliga händelser som bränder eller explosioner, vilket vidare stödjer behovet av batterier med hög kvalitet. Till följd av detta är kraven från standarder och tillverkare inom bilindustrin höga i termer av kvalitetskontroll av produkter genom t.ex. mätsystemanalys (MSA), statistisk processtyrning (SPS), och duglighetsanalys. Vidare visar tidigare forskning på problem som kan uppstå under driftsättning och upprampning av produktion, vilka potentiellt kan uppstå för Northvolt Ett.  Syftet med denna studie har varit att beskriva hur högkvalitativ produktion kan säkerställas och upprätthållas under och efter driftsättning. Studien har genomförts som en kvalitativ fallstudie vid Northvolt Ett med fokus på kvalifikation av coating-processen. Utgångspunkten för studien har varit att undersöka tidigare forskning inom kvalitetssäkring från andra industrier, analysera standarder från bilindustrin, och hämta in lärdomar från pilotproduktionen vid Northvolt Labs i Västerås. Ostrukturerade intervjuer genomfördes med anställda på Northvolt för att öka förståelsen för vad som tidigare gjorts relaterat till kvalitetssäkring för Coating.  Lärdomarna från Northvolt Labs visade ett tydligt fokus på förebyggande åtgärder, som upprättande av en Design-FMEA, Process-FMEA, och en kontrollplan för coating-processen. Dock identifierades ett förbättringsområde inom åtgärder för processförbättring och kontroll, då avsaknaden av SPS har genererat opålitliga resultat från den genomförda duglighetsanalysen. Vidare har tidigare forskning visat att förebyggande åtgärder borde kombineras med åtgärder för processförbättring för att snabbt uppnå fullskalig produktion. Rekommendationer har därför tagits fram till Northvolt för att implementera en tydlig strategi för produktkvalifikation genom SPS och duglighetsanalys, som ett komplement till de förebyggande åtgärderna. Dessa rekommendationer inkluderar specifika förslag för validering av coating-processen samt ett generellt ramverk för processvalidering genom MSA, SPS, och duglighetsanalys. De presenterade rekommendationerna kan hjälpa Northvolt att genomföra en framgångsrik driftsättning av processerna på Northvolt Ett och kan även vara användbara för processvalidering i andra tillverkningsindustrier.
APA, Harvard, Vancouver, ISO, and other styles
10

Simandl, Martin. "Zavedení SPC ve výrobním procesu." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2019. http://www.nusl.cz/ntk/nusl-403835.

Full text
Abstract:
The diploma thesis focuses on the introduction of statistical process control in selected manufacturing company XYZ. It is divided into a theoretical and a practical part, while the theoretical part deals with theoretical knowledge of SPC methodology and quality management. The content of the practical part is the design and implementation of the measuring and evaluation station, which will be used for statistical control of the SPC process, into the emerging production of chip machining.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Capability of the measurement system"

1

Haq, Md Zahurul. Applied measurement system. Rijeka: InTech, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Blakely, Aylmer D. Combustion recovery: A measurement of fire retardant extinguishment capability. [Ogden, Utah]: U.S. Dept. of Agriculture, Forest Service, Intermountain Forest and Range Experiment Station, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hunt, J. E., A. Vandervalk, and D. Snyder. Roadway Measurement System Evaluation. Washington, D.C.: National Academies Press, 2011. http://dx.doi.org/10.17226/14523.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Roberts, Eileen. Aviation system analysis capability executive assistant analyses. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Science, Lawrence Hall of. Measurement. [Nashua, NH?]: Published and distributed by Delta Education, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Roberts, A. SPECOL: A colorimetric measurement system. London: BBC, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Macyk, T. M. An agricultural capability rating system for reconstructed soils. Edmonton, Alta: Heritage Fund, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Roberts, Eileen. Aviation system analysis capability quick response system report for fiscal year 1997. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Roberts, Eileen. Aviation system analysis capability quick response system report for fiscal year 1997. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Measurement action! Bloomington, Minn: Red Brick Learning, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Capability of the measurement system"

1

Shi, Liangxing, Wei Chen, and Zhen He. "Measurement System Capability Analysis for Simple Linear Profiles." In Proceedings of the 6th International Asia Conference on Industrial Engineering and Management Innovation, 301–6. Paris: Atlantis Press, 2015. http://dx.doi.org/10.2991/978-94-6239-148-2_30.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bissell, Derek. "Evaluating the precision of a measurement system (gauge capability)." In Statistical Methods for SPC and TQM, 281–304. Boston, MA: Springer US, 1994. http://dx.doi.org/10.1007/978-1-4899-7120-3_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Brik, Adel, Mohamed Goddi, and Nabil Ben Fredj. "Evaluating the Capability Index of a Process Integrating Sampling Plan and the Measurement System Number of Distinct Categories NDC." In Lecture Notes in Mechanical Engineering, 118–23. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-52071-7_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Drain, David. "Measurement Capability." In Statistical Methods for Industrial Process Control, 228–81. Boston, MA: Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-4088-5_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Fagot, Martin G. "Development of a Deep-Towed Seismic System A New Capability for Deep-Ocean Acoustic Measurements." In Ocean Seismo-Acoustics, 853–62. Boston, MA: Springer US, 1986. http://dx.doi.org/10.1007/978-1-4613-2201-6_80.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Krishnan, Gopi. "Sensor Measurement Capability." In Thermal Sensors, 43–56. New York, NY: Springer New York, 2015. http://dx.doi.org/10.1007/978-1-4939-2581-0_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Dietrich, Edgar, and Alfred Schulze. "Measurement Process Capability." In Measurement Process Qualification, 1–15. München: Carl Hanser Verlag GmbH & Co. KG, 2011. http://dx.doi.org/10.3139/9783446429550.001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Dietrich, Edgar, and Alfred Schulze. "Gage Capability as a Measurement Process Capability Study." In Measurement Process Qualification, 44–116. München: Carl Hanser Verlag GmbH & Co. KG, 2011. http://dx.doi.org/10.3139/9783446429550.005.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Oades, Lindsay G., Lisa M. Baker, Jacqueline J. Francis, and Jessica A. Taylor. "Wellbeing Literacy and Positive Education." In The Palgrave Handbook of Positive Education, 325–43. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-64537-3_13.

Full text
Abstract:
AbstractWellbeing literacy is a capability involving the vocabulary and knowledge about wellbeing, and skills of communicating, via multimodal pathways, for the wellbeing of oneself and others, in a way that is context sensitive and intentional. Wellbeing literacy offers three key benefits. Firstly, it may orient our focus towards wellbeing capabilities and processes, allowing for measurement and consideration of factors enabling or blocking wellbeing development. Secondly, wellbeing literacy provides an avenue to integrate positive education into education systems, drawing on existing multimodal learning and teaching capacities and strengths, while addressing existing curriculum requirements. Thirdly, wellbeing literacy is contextually sensitive and applicable to individuals and the systems in which they exist. Importantly, wellbeing literacy may provide the essential conduit between wellbeing interventions and wellbeing outcomes, and thereby be a necessary component for creating and sustaining well lives, providing a common language to build wellbeing capabilities within schools and their communities.
APA, Harvard, Vancouver, ISO, and other styles
10

Dietrich, Edgar, and Alfred Schulze. "Capability Studies in Visual Inspections." In Measurement Process Qualification, 244–47. München: Carl Hanser Verlag GmbH & Co. KG, 2011. http://dx.doi.org/10.3139/9783446429550.013.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Capability of the measurement system"

1

Jin, Guojun, and Brian L. Tierney. "System capability effects on algorithms for network bandwidth measurement." In the 2003 ACM SIGCOMM conference. New York, New York, USA: ACM Press, 2003. http://dx.doi.org/10.1145/948205.948210.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Jin-Ning, Liu, Liu Hong-Wen, and Li Ya-Hui. "Simulation and Test of Finite Capability Power System." In 2012 Second International Conference on Instrumentation, Measurement, Computer, Communication and Control (IMCCC). IEEE, 2012. http://dx.doi.org/10.1109/imccc.2012.232.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Crowther, Blake, Michael Wojcik, Robert Lemon, Alan Bird, Prasad Valupadas, Long Fu, Bonnie Leung, and Allan Chambers. "The Alberta DIAL System, A Mobile Emissions Measurement Capability for Alberta." In Optical Instrumentation for Energy and Environmental Applications. Washington, D.C.: OSA, 2013. http://dx.doi.org/10.1364/e2.2013.em2a.2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Liu, Zhijun, Weiqi Liu, Yufeng He, and Guoxi Rao. "Design of Output Capability Test System for High Power Servo Driver." In 2018 Eighth International Conference on Instrumentation & Measurement, Computer, Communication and Control (IMCCC). IEEE, 2018. http://dx.doi.org/10.1109/imccc.2018.00170.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

di Renzone, Gabriele, Ada Fort, Marco Mugnaini, Giacomo Peruzzi, Alessandro Pozzebon, and Valerio Vignoli. "LoRaWAN Transmission System Capability Assessment in Industrial Environment Under Temperature and Humidity Characterization." In 2021 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). IEEE, 2021. http://dx.doi.org/10.1109/i2mtc50364.2021.9460076.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Miller, L. D., M. F. Sulcoski, and B. A. Farmer. "Complex issues of military capability: Measurement, assessment, simulation." In Applied nonlinear dynamics and stochastic systems near the millenium. AIP, 1997. http://dx.doi.org/10.1063/1.54188.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Jordan, J. L., M. C. Scardelletti, and G. E. Ponchak. "High temperature antenna measurement system with GSG or GS contact probing capability." In amp; USNC/URSI National Radio Science Meeting. IEEE, 2009. http://dx.doi.org/10.1109/aps.2009.5172307.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Acree, Robert L., John E. Heebner, Matthew A. Prantil, John M. Halpin, Tracy S. Budge, Lyudmila A. Novikova, Ron Sigurdsson, and Larry J. Pelz. "Pulse contrast measurement on the NIF Advanced Radiographic Capability (ARC) laser system." In SPIE LASE, edited by Abdul A. S. Awwal. SPIE, 2017. http://dx.doi.org/10.1117/12.2257576.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Yoon, Chui Young, and Byung Hwan Kim. "Measurement and improvement of individual e-Business capability." In 2011 IEEE MTT-S International Microwave Workshop Series on Innovative Wireless Power Transmission: Technologies, Systems, and Applications (IMWS 2011). IEEE, 2011. http://dx.doi.org/10.1109/imws.2011.6115334.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Lavieri, Rodrigo Sauri, Eduardo Aoun Tannuri, Andre´ L. C. Fujarra, and Diego Cascelli Correˆa. "Aided Inertial Measurement System Applied to Torpedo Pile Trajectory Reconstruction." In ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering. ASMEDC, 2011. http://dx.doi.org/10.1115/omae2011-49080.

Full text
Abstract:
Torpedo pile has become one of the most popular foundation systems in Brazil’s offshore oil exploitation, mostly, due to its low installation cost. Additionally, torpedo piles have shown good fixation capability even when applied in mooring configuration such as taut leg with relatively close angles to the vertical. This fixation capability is closely dependent to the depth of penetration and the final attitude of the pile. In order to determine these parameters, MEMS-based Inertial Measurement Units have been used. Units of this kind are known for high noise density and, alone, are not adequate to any kind of navigation. Concerning these limitations, other sources of data are added to the inertial measurements, in order to improve the system state estimation. This data fusion is carried out by the Kalman Filtering and is also called Aided Inertial Measurement Units. This paper presents the Kalman Filter implementation and the results obtained from the fusion of the pressure gage signal, alternative pitch and roll measurements and the inertial measurements applied to the torpedo pile deployment.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Capability of the measurement system"

1

Shroyer, K. Metrology measurement capability. Office of Scientific and Technical Information (OSTI), January 1995. http://dx.doi.org/10.2172/10116062.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Vlahopoulos, Nick, and David Singer. Advanced System of Systems Design Capability. Fort Belvoir, VA: Defense Technical Information Center, March 2007. http://dx.doi.org/10.21236/ada464016.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Acosta, Jacob, Scot Hoesly, Scott Huseth, Steven Krider, Jeremy Lamb, Calvin Martin, Vince Medina, Jorge Medina, Michael Nguyen, and Jaykant Patel. Architecting Joint Command and Control System of System Capability Certifications. Fort Belvoir, VA: Defense Technical Information Center, September 2007. http://dx.doi.org/10.21236/ada472716.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hu, R., J. W. Thomas, E. Munkhzul, T. H. Fanning, H. Zhang, and R. Martineau. Development of SFR Primary System Simulation Capability for Advanced System Codes. Office of Scientific and Technical Information (OSTI), January 2014. http://dx.doi.org/10.2172/1121040.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

DeLuca, Cecelia. Optimized Infrastructure for the Earth System Prediction Capability. Fort Belvoir, VA: Defense Technical Information Center, September 2013. http://dx.doi.org/10.21236/ada605091.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

DeLuca, Cecelia. Optimized Infrastructure for the Earth System Prediction Capability. Fort Belvoir, VA: Defense Technical Information Center, September 2014. http://dx.doi.org/10.21236/ada617972.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Cremer, C. D., E. Cramer, and W. Lowry. Laboratory evaluation of the Pipe Explorer{trademark} gamma measurement and deployment capability. Office of Scientific and Technical Information (OSTI), August 1994. http://dx.doi.org/10.2172/650178.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Fischer, Erin E., and Andrew D. Shugard. Precision volume measurement system. Office of Scientific and Technical Information (OSTI), November 2004. http://dx.doi.org/10.2172/921130.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Gentry, Elizabeth J. SI measurement system chart. Gaithersburg, MD: National Institute of Standards and Technology, August 2017. http://dx.doi.org/10.6028/nist.sp.304a-2017.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Joshi, Mohit, Joseph Palchak, S. K. Soonee, S. R. Narasimhan, and Saif Rehman. Ramping Up the Ramping Capability: India's Power System Transition. Office of Scientific and Technical Information (OSTI), September 2020. http://dx.doi.org/10.2172/1665866.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Capability of the measurement system' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography