Relevant bibliographies by topics / Camera-based product

Academic literature on the topic 'Camera-based product'

Author: Grafiati
Published: 10 December 2022
Last updated: 28 January 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Camera-based product.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Camera-based product"

1

N, Rajkumar, Anand M.G, and Barathiraja N. "Portable Camera-Based Product Label Reading For Blind People." International Journal of Engineering Trends and Technology 10, no. 11 (April 25, 2014): 521–24. http://dx.doi.org/10.14445/22315381/ijett-v10p303.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Vineeth, K. Sai. "Design of a Portable Camera based Text and Product Label Reading Product for Blind People." International Journal for Research in Applied Science and Engineering Technology 6, no. 4 (April 30, 2018): 195–99. http://dx.doi.org/10.22214/ijraset.2018.4037.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ishii, Yoshie, Koji Masuda, Yoshinori Hayashi, Teruaki Mitsuya, and Shigeyuki Haruyama. "A STUDY ON TECHNOLOGY TREND OF CAMERA BY USING FI CODE IN JAPANESE PATENT." Journal of Engineering and Management in Industrial System 9, no. 1 (May 30, 2021): 68–73. http://dx.doi.org/10.21776/ub.jemis.2021.009.01.7.

Full text
Abstract:
In development of technology and product, it’s important to make decisions based on technology trend. Some previous studies obtained technology trend based on patent information. In our previous study, we tried to investigate the state of innovation and the emergence of dominant design by using patent information. We analyzed inkjet printers and NC machines with theme codes and F term codes in Japanese patent classification codes. In this study, we tried to know the change of technology of other products other than inkjet printers or NC machines by using patent information. The target product of this study is camera. Camera products changed its key technology of imaging and recording from analogue film to digital imaging sensor and semiconductor memories. We attempted to obtain this change by using patent information.
APA, Harvard, Vancouver, ISO, and other styles
4

Bhandari, Harsh, Jayesh Mulay, Bhushan Gangurde, and Mr D. M. Shinde. "Bio-Medical Waste Management System." International Journal for Research in Applied Science and Engineering Technology 10, no. 5 (May 31, 2022): 2866–71. http://dx.doi.org/10.22214/ijraset.2022.42838.

Full text
Abstract:
Abstract: Sorting of products is a very difficult industrial process. Continuous manual sorting creates consistency issues. This paper describes a working prototype designed for automatic sorting of objects based on the colour. We are using Pi camera to detect the object and the Raspberry Pi microcontroller was used to control the overall process. The identification of the biomedical Waste is based on the image processing using Pi camera module. Two conveyor belts were used, each controlled by separate Servo motors. The first belt is for placing the product to be analysed by the pi camera module, and the second belt is for moving the container, having separated compartments, in order to separate the products. The experimental results promise that the prototype will fulfil the needs for higher production and precise quality in the field of automation. Keywords: Raspberry pi, Servo Motor, Pi camera, Programming
APA, Harvard, Vancouver, ISO, and other styles
5

Rajagomathi, M., P. Sabareeswaran, A. Annamalai, and V. J. Arunkumar. "Portable Camera Based Assistive Text and Product Label Reading for Blind Persons." Special Issue 5, Special Issue 1 (2019): 264–75. http://dx.doi.org/10.23883/ijrter.conf.20190322.032.nfimh.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Chen, Mo, Georges Fadel, and Ivan Mata. "Applications of affordance and cognitive ergonomics in virtual design: A digital camera as an illustrative case." Concurrent Engineering 30, no. 1 (December 9, 2021): 5–20. http://dx.doi.org/10.1177/1063293x211054132.

Full text
Abstract:
Affordance-based design (ABD) plays an important role in identifying interactions, especially effortless ones, between users and artifacts. Cognitive ergonomics extends our understanding of this effortless interaction. This study combines the two design methodologies together in order to reduce cognitive friction in using digital products. The design process of a compact digital camera is selected as a case study that includes the design of the physical shape for a camera and of its user interface. In designing a product shape, a design toolbox was developed that integrated a modified multi-objective genetic algorithm and the ABD, which was named as affordance-based interactive genetic algorithm. Using this toolbox and interactive user feedback, the camera design evolves toward a product that better satisfies the users. User interfaces (UIs) including linear and elliptic layouts were subsequently designed based on cognitive ergonomics. A predictive tool of UI, the Cog Tool, was used to evaluate the performance of skilled users on a given task by correlating the overall task completion time. Finally, this research has the potential to not only effectively address the shortcomings of the design of consumer electronics but also enrich the generation of design solutions during the preliminary design phase of such products.
APA, Harvard, Vancouver, ISO, and other styles
7

Hercog, Darko, Primož Bencak, Uroš Vincetič, and Tone Lerher. "Product Assembly Assistance System Based on Pick-To-Light and Computer Vision Technology." Sensors 22, no. 24 (December 13, 2022): 9769. http://dx.doi.org/10.3390/s22249769.

Full text
Abstract:
Product assembly is often one of the last steps in the production process. Product assembly is often carried out by workers (assemblers) rather than robots, as it is generally challenging to adapt automation to any product. When assembling complex products, it can take a long time before the assembler masters all the steps and can assemble the product independently. Training time has no added value; therefore, it should be reduced as much as possible. This paper presents a custom-developed system that enables the guided assembly of complex and diverse products using modern technologies. The system is based on pick-to-light (PTL) modules, used primarily in logistics as an additional aid in the order picking process, and Computer Vision technology. The designed system includes a personal computer (PC), several custom-developed PTL modules and a USB camera. The PC with a touchscreen visualizes the assembly process and allows the assembler to interact with the system. The developed PC application guides the operator through the assembly process by showing all the necessary assembly steps and parts. Two-step verification is used to ensure that the correct part is picked out of the bin, first by checking that the correct pushbutton on the PTL module has been pressed and second by using a camera with a Computer Vision algorithm. The paper is supported by a use case demonstrating that the proposed system reduces the assembly time of the used product. The presented solution is scalable and flexible as it can be easily adapted to show the assembly steps of another product.
APA, Harvard, Vancouver, ISO, and other styles
8

Dan, Bin, Shuang Peng, Xu Mei Zhang, and Kai Rao. "Product Variants Search and Retrieval Based on the Semantically Annotated Product Family Using Multi-Facet Domain Ontology." Advanced Materials Research 403-408 (November 2011): 4114–18. http://dx.doi.org/10.4028/www.scientific.net/amr.403-408.4114.

Full text
Abstract:
For the purpose of solving product variant search and retrieval problems for non-professional customers, a search and retrieval framework is proposed based on the semantically annotated product family using multi-facet domain ontology. The method of developing multi-faceted domain ontology is discussed, and the annotation model is constructed，then the methodology of search and retrieval is presented in detail. Finally, an example of a digital camera family is employed to illustrate the proposed approach.
APA, Harvard, Vancouver, ISO, and other styles
9

Yaron, Yaron, Eran Keinan, Moshe Benhamu, Ronen Regev, and Garry Zalmanzon. "NATIONAL GUIDELINES FOR DIGITAL CAMERA SYSTEMS CERTIFICATION." ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLI-B1 (June 3, 2016): 179–84. http://dx.doi.org/10.5194/isprsarchives-xli-b1-179-2016.

Full text
Abstract:
Digital camera systems are a key component in the production of reliable, geometrically accurate, high-resolution geospatial products. These systems have replaced film imaging in photogrammetric data capturing. Today, we see a proliferation of imaging sensors collecting photographs in different ground resolutions, spectral bands, swath sizes, radiometric characteristics, accuracies and carried on different mobile platforms. In addition, these imaging sensors are combined with navigational tools (such as GPS and IMU), active sensors such as laser scanning and powerful processing tools to obtain high quality geospatial products. The quality (accuracy, completeness, consistency, etc.) of these geospatial products is based on the use of calibrated, high-quality digital camera systems. <br><br> The new survey regulations of the state of Israel specify the quality requirements for each geospatial product including: maps at different scales and for different purposes, elevation models, orthophotographs, three-dimensional models at different levels of details (LOD) and more. In addition, the regulations require that digital camera systems used for mapping purposes should be certified using a rigorous mapping systems certification and validation process which is specified in the Director General Instructions. The Director General Instructions for digital camera systems certification specify a two-step process as follows: <br><br> 1. Theoretical analysis of system components that includes: study of the accuracy of each component and an integrative error propagation evaluation, examination of the radiometric and spectral response curves for the imaging sensors, the calibration requirements, and the working procedures. <br><br> 2. Empirical study of the digital mapping system that examines a typical project (product scale, flight height, number and configuration of ground control points and process). The study examine all the aspects of the final product including; its accuracy, the product pixels size on the ground (spatial resolution), its completeness (missing pixels and striping affect), its radiometric properties (e.g., relative edge response) and its spectral characteristics (e.g., histogram spread, bands misalignment). <br><br> This methodology was tested on a number of medium to large format digital cameras. The certification process is a basic stage in the mapping chain in Israel. This article provides the details of the Director General Instructions for digital camera systems certification, the methodology for certification and the tests that were carried out.
APA, Harvard, Vancouver, ISO, and other styles
10

Yaron, Yaron, Eran Keinan, Moshe Benhamu, Ronen Regev, and Garry Zalmanzon. "NATIONAL GUIDELINES FOR DIGITAL CAMERA SYSTEMS CERTIFICATION." ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLI-B1 (June 3, 2016): 179–84. http://dx.doi.org/10.5194/isprs-archives-xli-b1-179-2016.

Full text
Abstract:
Digital camera systems are a key component in the production of reliable, geometrically accurate, high-resolution geospatial products. These systems have replaced film imaging in photogrammetric data capturing. Today, we see a proliferation of imaging sensors collecting photographs in different ground resolutions, spectral bands, swath sizes, radiometric characteristics, accuracies and carried on different mobile platforms. In addition, these imaging sensors are combined with navigational tools (such as GPS and IMU), active sensors such as laser scanning and powerful processing tools to obtain high quality geospatial products. The quality (accuracy, completeness, consistency, etc.) of these geospatial products is based on the use of calibrated, high-quality digital camera systems. <br><br> The new survey regulations of the state of Israel specify the quality requirements for each geospatial product including: maps at different scales and for different purposes, elevation models, orthophotographs, three-dimensional models at different levels of details (LOD) and more. In addition, the regulations require that digital camera systems used for mapping purposes should be certified using a rigorous mapping systems certification and validation process which is specified in the Director General Instructions. The Director General Instructions for digital camera systems certification specify a two-step process as follows: <br><br> 1. Theoretical analysis of system components that includes: study of the accuracy of each component and an integrative error propagation evaluation, examination of the radiometric and spectral response curves for the imaging sensors, the calibration requirements, and the working procedures. <br><br> 2. Empirical study of the digital mapping system that examines a typical project (product scale, flight height, number and configuration of ground control points and process). The study examine all the aspects of the final product including; its accuracy, the product pixels size on the ground (spatial resolution), its completeness (missing pixels and striping affect), its radiometric properties (e.g., relative edge response) and its spectral characteristics (e.g., histogram spread, bands misalignment). <br><br> This methodology was tested on a number of medium to large format digital cameras. The certification process is a basic stage in the mapping chain in Israel. This article provides the details of the Director General Instructions for digital camera systems certification, the methodology for certification and the tests that were carried out.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Camera-based product"

1

Franke, Ingmar S., Mario Linke, Christian Bendicks, and Rainer Groh. "Finishing Perspective (Endbehandlung Perspektive)." Thelem Universitätsverlag & Buchhandlung GmbH & Co. KG, 2019. https://tud.qucosa.de/id/qucosa%3A36905.

Full text
Abstract:
Vor dem Hintergrund des Konferenzrahmens: Entwerfen, Entwickeln, Erleben möchten wir dem Leser den Entwurf unseres geometrischen Ansatzes einer Objekt-basierten Perspektivischen Optimierung (OPO), das Entwickeln unseres computergrafischen Algorithmus und das Erleben und Arbeiten im Designentscheidungsprozess nahebringen. Den OPO-Algorithmus vergleichend wollen wir einen zweiten Ansatz, eine Kamera-basierte Perspektivische Optimierung (KPO), darlegen. Unser konkretes Anliegen ist es, Designentscheidungsprozesse zu unterstützen, indem wir digitale und analoge Mittel und Werkzeuge optimieren und zusammenbringen. Das heißt, nicht nur optimierte computergrafische Algorithmen, sondern auch ein design-gerechtes Verhalten des Betrachters vor einer Bildfläche sind entscheidend. Je nach Rolle des Betrachters (Entscheider, Designer, Präsentator, Moderator) liegen spezifische Rahmenbedingungen, Handlungs- sowie Arbeitsabläufe im Designentscheidungsprozess vor.
APA, Harvard, Vancouver, ISO, and other styles
2

Leung, Tin Wah William. "High precision camera-based colour inspection of industrial products." Thesis, University of Huddersfield, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.338605.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Tung, Sung-Ching, and 董松青. "Design of Product Selection for Camera Using Case-based Reasoning." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/13241487681383509058.

Full text
Abstract:
碩士
國立屏東商業技術學院
資訊管理系(所)
100
Internet has been developed rapidly and it brings high convenience for information collection. However, it causes a serious problem of information overloading. To solve the problem researchers have proposed different methods. Information recommendation system is one of those popular methods. The information overloading problem also occurs in camera selection. This study aims to solve the selection problem to recommend proper camera using case-based reasoning. This research find out the most similar case from the case-based reasoning and information in the past by similarity analysis, which giving the helpful process and second-handed price. As a result, this way not only saves time, but also provides users with much related information for their reference. Finally, this research simulates the situation of users so as to reason step by step and lists the top ten of similar cases to users. The result shows that Information Recommendation System could save time and increase work efficiency with case-based reasoning.
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Camera-based product"

1

Thigale, Somnath, and Ranjeet B. Kagade. "Portable Camera Based Assistive Text and Product Label Reading from Hand Held Object by Using Android App for Blind Person." In Techno-Societal 2020, 117–24. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-69921-5_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kumar, Sandeep, Sanjana Mathew, Navya Anumula, and K. Shravya Chandra. "Portable Camera-Based Assistive Device for Real-Time Text Recognition on Various Products and Speech Using Android for Blind People." In Lecture Notes in Networks and Systems, 437–48. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-3172-9_42.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hagn, Korbinian, and Oliver Grau. "Optimized Data Synthesis for DNN Training and Validation by Sensor Artifact Simulation." In Deep Neural Networks and Data for Automated Driving, 127–47. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-01233-4_4.

Full text
Abstract:
AbstractSynthetic, i.e., computer-generated imagery (CGI) data is a key component for training and validating deep-learning-based perceptive functions due to its ability to simulate rare cases, avoidance of privacy issues, and generation of pixel-accurate ground truth data. Today, physical-based rendering (PBR) engines simulate already a wealth of realistic optical effects but are mainly focused on the human perception system. Whereas the perceptive functions require realistic images modeled with sensor artifacts as close as possible toward the sensor, the training data has been recorded. This chapter proposes a way to improve the data synthesis process by application of realistic sensor artifacts. To do this, one has to overcome the domain distance between real-world imagery and the synthetic imagery. Therefore, we propose a measure which captures the generalization distance of two distinct datasets which have been trained on the same model. With this measure the data synthesis pipeline can be improved to produce realistic sensor-simulated images which are closer to the real-world domain. The proposed measure is based on the Wasserstein distance (earth mover’s distance, EMD) over the performance metric mean intersection-over-union (mIoU) on a per-image basis, comparing synthetic and real datasets using deep neural networks (DNNs) for semantic segmentation. This measure is subsequently used to match the characteristic of a real-world camera for the image synthesis pipeline which considers realistic sensor noise and lens artifacts. Comparing the measure with the well-established Fréchet inception distance (FID) on real and artificial datasets demonstrates the ability to interpret the generalization distance which is inherent asymmetric and more informative than just a simple distance measure. Furthermore, we use the metric as an optimization criterion to adapt a synthetic dataset to a real dataset, decreasing the EMD distance between a synthetic and the Cityscapes dataset from 32.67 to 27.48 and increasing the mIoU of our test algorithm () from 40.36 to $$47.63\%$$ 47.63 % .
APA, Harvard, Vancouver, ISO, and other styles
4

Liang, Guodong. "CAE Optimization Analysis and Design of Injection Mold Cooling System for Digital Camera Battery Cover." In Advances in Transdisciplinary Engineering. IOS Press, 2022. http://dx.doi.org/10.3233/atde221045.

Full text
Abstract:
Moldflow is used to analyze the injection molding of the product. According to the analysis results, the gate position, quantity, size, cooling system, and pressure holding parameters are effectively optimized, and the warpage deformation is effectively reduced. It can reduce the late modification caused by the unreasonable mold design, obtain the best molding parameters, shorten the production cycle of the product, and enhance the competitiveness of the enterprise. This paper optimizes the filling, cooling and molding parameters of the mold cooling system of the digital camera battery cover based on the Moldflow software, so that the warpage deformation can be effectively controlled.
APA, Harvard, Vancouver, ISO, and other styles
5

Lie, Sulgi. "Introduction." In Towards a Political Aesthetics of Cinema. Nieuwe Prinsengracht 89 1018 VR Amsterdam Nederland: Amsterdam University Press, 2020. http://dx.doi.org/10.5117/9789462983632_intro_part01.

Full text
Abstract:
The idea of an outside of the film is based on the assumption that an absent cause is structurally immanent to film. In a film, the absent cause coincides with the camera’s gaze, which remains external to the image precisely as the generator of the cinematic image. This is the paradox of the cinema: the camera can never reveal itself as the cause of the image, the generative outside cannot be transferred to the inside of the image. With apparatus theory, however, this necessary split between gaze and image, cause and effect, production process and product, becomes the cardinal ideological problem of a political film aesthetics. How can cinema produce political effects when its the structure of its dispositif works towards concealing its productive outside?
APA, Harvard, Vancouver, ISO, and other styles
6

Bjom, Michael. "The Right of Interpretation." In Information Communication Technologies, 1395–413. IGI Global, 2008. http://dx.doi.org/10.4018/978-1-59904-949-6.ch095.

Full text
Abstract:
This chapter is an empirical research report describing the diffusion of mobile camera phones and picture mail services in Japan between the years 1997 and 2005, based on annual consumer surveys conducted by Ericsson Consumer & Enterprise Lab. A general framework based on sociocultural values and attitudes to telecom for describing the telecom market from a consumer perspective is presented. This framework is then used to put different consumer life stage segments in relation to each other in respect to product diffusion. The change over time of attitudes and behavior is described, and the conclusion is drawn that the product terminology spontaneously created by consumers themselves in order to relate to the product is an important step for mass market diffusion. Furthermore, the group of people who develop this terminology becomes a crucial catalyst for diffusion—and in the Japanese case presented here consists of female students.
APA, Harvard, Vancouver, ISO, and other styles
7

Bjom, Michael. "The Right of Interpretation." In Information Communication Technologies and Emerging Business Strategies, 36–58. IGI Global, 2007. http://dx.doi.org/10.4018/978-1-59904-234-3.ch003.

Full text
Abstract:
This chapter is an empirical research report describing the diffusion of mobile camera phones and picture mail services in Japan between the years 1997 and 2005, based on annual consumer surveys conducted by Ericsson Consumer & Enterprise Lab. A general framework based on sociocultural values and attitudes to telecom for describing the telecom market from a consumer perspective is presented. This framework is then used to put different consumer life stage segments in relation to each other in respect to product diffusion. The change over time of attitudes and behavior is described, and the conclusion is drawn that the product terminology spontaneously created by consumers themselves in order to relate to the product is an important step for mass market diffusion. Furthermore, the group of people who develop this terminology becomes a crucial catalyst for diffusion—and in the Japanese case presented here consists of female students.
APA, Harvard, Vancouver, ISO, and other styles
8

Yastikli, Naci, Zehra Erisir, Pelin Altintas, and Tugba Cak. "The Use of the Terrestrial Photogrammetry in Reverse Engineering Applications." In 3D Printing, 241–50. IGI Global, 2017. http://dx.doi.org/10.4018/978-1-5225-1677-4.ch013.

Full text
Abstract:
The reverse engineering applications has gained great momentum in industrial production with developments in the fields of computer vision and computer-aided design (CAD). The reproduction of an existing product or a spare part, reproduction of an existing surface, elimination of the defect or improvement of the available product are the goals of industrial reverse engineering applications. The first and the most important step in reverse engineering applications is the generation of the three dimensional (3D) metric model of an existing product in computer environment. After this stage, many operations such as the preparation of molds for mass production, the performance testing, the comparison of the existing product with other products and prototypes which are available on the market are performed by using the generated 3D models. In reverse engineering applications, the laser scanner system or digital terrestrial photogrammetry methods, also called contactless method, are preferred for the generation of the 3D models. In particular, terrestrial photogrammetry has become a popular method since require only photographs for the 3-dimensional drawing, the generation of the dense point cloud using the image matching algorithms and the orthoimage generation as well as its low cost. In this paper, an industrial application of 3D information modelling is presented which concerns the measurement and 3D metric modelling of the ship model. The possible usage of terrestrial photogrammetry in reverse engineering application is investigated based on low cost photogrammetric system. The main aim was the generation of the dense point cloud and 3D line drawing of the ship model by using terrestrial photogrammetry, for the production of the ship in real size as a reverse engineering application. For this purpose, the images were recorded with digital SLR camera and orientations have been performed. Then 3D line drawing operations, point cloud and orthoimage generations have been accomplished by using PhotoModeler software. As a result of the proposed terrestrial photogrammetric steps, 0.5 mm spaced dense point cloud and orthoimage have been generated. The obtained results from experimental study were discussed and possible use of proposed methods was evaluated for reverse engineering application.
APA, Harvard, Vancouver, ISO, and other styles
9

Guo, Yinni. "The Axiomatic Usability Evaluation Method." In Emerging Research and Trends in Interactivity and the Human-Computer Interface, 353–73. IGI Global, 2014. http://dx.doi.org/10.4018/978-1-4666-4623-0.ch018.

Full text
Abstract:
This chapter introduces a new usability evaluation method, the axiomatic evaluation method, which is developed based on the axiomatic design theory – a formalized design methodology that can be used to solve a variety of design problems. This new evaluation method examines three domains of a product: customer domain, functional domain, and control domain. This method investigates not only usability problems reported by the users, but also usability problems related to customer requirements and usability problems related to control through checking the mapping matrix between the three domains. To determine how well this new usability evaluation method works, a between-subject experiment was conducted to compare the axiomatic evaluation method with the think aloud method. Sixty participants were randomly assigned to use either method to evaluate three popular consumer electronic devices (music player, digital camera, mobile phone) that represented different levels of complexity. Number of usability problems discovered, completion time, and overall user satisfaction were collected. Results show that the axiomatic evaluation method performed better in finding usability problems for the mobile phone. The axiomatic evaluation method was also better at finding usability problems about user expectation and control than the think aloud method. Benefits and drawbacks of using the axiomatic evaluation method are discussed.This chapter introduces a new usability evaluation method, the axiomatic evaluation method, which is developed based on the axiomatic design theory – a formalized design methodology that can be used to solve a variety of design problems. This new evaluation method examines three domains of a product: customer domain, functional domain, and control domain. This method investigates not only usability problems reported by the users, but also usability problems related to customer requirements and usability problems related to control through checking the mapping matrix between the three domains. To determine how well this new usability evaluation method works, a between-subject experiment was conducted to compare the axiomatic evaluation method with the think aloud method. Sixty participants were randomly assigned to use either method to evaluate three popular consumer electronic devices (music player, digital camera, mobile phone) that represented different levels of complexity. Number of usability problems discovered, completion time, and overall user satisfaction were collected. Results show that the axiomatic evaluation method performed better in finding usability problems for the mobile phone. The axiomatic evaluation method was also better at finding usability problems about user expectation and control than the think aloud method. Benefits and drawbacks of using the axiomatic evaluation method are discussed.
APA, Harvard, Vancouver, ISO, and other styles
10

Singh Rajput, Krishnapal, Dharmendra Singh Sikarwar, Sheetal Jain, Ayan Mukharya, Krati Sabre, and Deepak Batham. "AI Based Motor/Water Pump Switching System." In SCRS Proceedings of International Conference of Undergraduate Students, 115–20. 2023rd ed. Soft Computing Research Society, 2023. http://dx.doi.org/10.52458/978-81-95502-01-1-12.

Full text
Abstract:
Automation has eased the life of many people. Installation of electric motor for water pump/bore well on the agricultural land for irrigation purpose has fulfilled the basic need of water supply, resulting in an increase in the production of crops. To switch the motor on/off, take too much time to travel, especially when the field and pump/motor switch are far away or placed at some distance. Along with that frequent power cut/off is one the major issue in the ruler areas. The bore well motor runs on a three phase power supply, however, failure in any of the phase line causes to damage the electric motor. Most of the farmers are unaware about the phase line failure and the power supply fluctuations. To solve the above mentioned issues, an artificial intelligence (AI) based water-pump switching system hardware device/prototype/product/kit is design and demonstrated in the present manuscript. The farmer got a message from the proposed device regarding power cut, coming of power supply, and any phase failure on their non-android mobile phones wherever and whenever happened. The production cost of the proposed device is around one thousand Indian rupees only which is very less as compared to the present smart switches available in the market because it does not require any smart/android phone for controlling them. Also, the traditional switches will not have to use the auto switching characteristic, which just only provide fault detection as they are using it currently. Along with that in the proposed device we use Arduino and GSM module, so it makes to install camera in the kit very easily. This helps farmers to detect theft at the field. Hence, it provides security too. The proposed device makes farmer stress free so that they focus more on their crops rather wasting their time to switching on/off the motor and the repairing time when it fails due to the uneven power fluctuations or power cut, ultimately increases the production of crops. The paper presented the component description, working principle, block/circuit diagram of the proposed prototype/device, and show the real images of the prototype.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Camera-based product"

1

Pieters, R. S., P. P. Jonker, and H. Nijmeijer. "Product pattern-based camera calibration for microrobotics." In 2010 25th International Conference of Image and Vision Computing New Zealand (IVCNZ). IEEE, 2010. http://dx.doi.org/10.1109/ivcnz.2010.6148839.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Zhang, Jizhong, Shinan Lang, Qiang Wu, and Chuan Liu. "Material Recognition Based on a Pulsed Time-of-Flight Camera." In 2019 IEEE Symposium on Product Compliance Engineering - Asia (ISPCE-CN). IEEE, 2019. http://dx.doi.org/10.1109/ispce-cn48734.2019.8958633.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Jasmine, G. Sophia, D. Magdalin Marry, S. Swetha Lakshmi, R. Rishiwanth, K. Sreehariprasath, and J. Surendhar. "Camera based text and Product Lable Reading for Blind People." In 2021 7th International Conference on Advanced Computing and Communication Systems (ICACCS). IEEE, 2021. http://dx.doi.org/10.1109/icaccs51430.2021.9441860.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Nidamarthi, Srinivas, Gu¨nther Mechler, and Harsh Karandikar. "A Systematic Method for Designing Profitable Product Families." In ASME 2003 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/detc2003/dfm-48139.

Full text
Abstract:
Every company has the business objectives of maximizing customer choice as well as its profitability. Typically, companies address maximum customer choice through a large spectrum of variants in their products to satisfy varying customer needs. For example, a camera manufacturer may wish to offer various choices such as fixed focus, auto-focus, variable zoom, different zoom ranges, SLR, APS, and digital cameras, and in different combinations, to satisfy customers with different demands (including the price that they wish to pay). The business goal, therefore, is to design a product family that meets a wide range of customer choices but at a minimum cost so as to maximize the profit margin. These two objectives, choice and profit margin, are not as contradictory as they seem. In this paper, we show that by using a set of systematic methods a company can identify the essential design elements of a profitable product family. We have successfully applied this method in a number of product families ranging from airhandling fans to robot controllers, and from mass-produced products to project based customized products.
APA, Harvard, Vancouver, ISO, and other styles
5

Jeong, Haedong, Minsub Kim, Bumsoo Park, and Seungchul Lee. "Vision-Based Real-Time Layer Error Quantification for Additive Manufacturing." In ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/msec2017-2991.

Full text
Abstract:
Quality assurance of Additive Manufacturing (AM) products has become an important issue as the AM technology is extending its application throughout the industry. However, with no definite measure to quantify the error of the product and monitor the manufacturing process, many attempts are made to propose an effective monitoring system for the quality assurance of AM products. In this research, a novel approach for quantifying the error in real-time is presented through a closed-loop vision-based tracking method. As conventional AM processes are open-loop processes, we focus on the implementation of real-time error quantification of the products through the utilization of a closed-loop process. Three test models are designed for the experiment, and the tracking data from the camera will be compared with the G-code of the product to evaluate the geometrical errors. The results obtained from the camera analysis will then be validated through comparison of the results obtained from a 3D scanner.
APA, Harvard, Vancouver, ISO, and other styles
6

Alizon, Fabrice, Steven B. Shooter, and Timothy W. Simpson. "Assessing and Increasing Product and Family Differentiation in the Market." In ASME 2006 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/detc2006-99538.

Full text
Abstract:
To help guarantee profit and stability in today’s global market, companies must focus on the differentiation of their products. Successfully differentiated products will attract customers, generate revenue and benefit the brand image, whereas a banal product can lose money and leave a bad impression in the market. Many large companies have recently lost significant market share in part due to poor product differentiation. This paper introduces four indices to assess this differentiation at two levels—family and market—based on product function and function attributes. At the family level, the Product Differentiation Index (PDI) assesses the differentiation between a product and other products in the rest of the family and also the differentiation within the family. At the market level, the Family Differentiation Index (FDI), Family Coverage Index (FCI), and Family Un-coverage Index (FUI) assess the differentiation, the coverage, and the un-coverage of a family with another, and/or with the rest of the market, respectively. These indices help designers and marketers evaluate the positioning of their products and support product family planning. A case study involving two competitive single-use camera families is presented.
APA, Harvard, Vancouver, ISO, and other styles
7

Fung, Kwong Chiu, Wai Ho Mow, Kam Hei Au, Yim To Mok, and Ho Yin Chim. "Development and Product Trials of a Cost-effective Cloud-based Thermal Camera Body Temperature Measurement System." In ICCCM '21: The 2021 9th International Conference on Computer and Communications Management. New York, NY, USA: ACM, 2021. http://dx.doi.org/10.1145/3479162.3479173.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ye, Xiaoli, and John K. Gershenson. "Focused Product Family Improvement." In ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/detc2008-49597.

Full text
Abstract:
Manufacturers in various industries are seeking to redesign their existing product families to better satisfy their diverse customer needs while maintaining competitive cost structures. Failure to carefully balance the commonality/variety tradeoff during product family redesign will catastrophically hamper the widely sought benefits of both appropriate commonality and variety. Existing product family redesign approaches often focus on increasing the degree of commonality or variety unilaterally and to their utmost, without considering the appropriate commonality/variety tradeoff based on both marketing and engineering resource concerns. The result is redesigned product families that are unachievable or much delayed. In this paper, the Focused Product Family Improvement Method (FPFIM) is proposed to help manufacturers utilize their limited engineering efforts to efficiently respond to market needs using their own competitive focus and commonality/variety tradeoff analysis. This method uses a graphical evaluation tool, the Product Family Evaluation Graph, to determine the necessary direction of improvement for product family redesign — either increasing appropriate commonality or increasing appropriate variety. A set of indices, the Commonality Diversity Index for commonality and variety, support the FPFIM in identifying components with undesirable commonality or undesirable variety, prime targets of redesign to satisfy the redesign intent. To illustrate the proposed method, an example application with four single-use camera families is presented.
APA, Harvard, Vancouver, ISO, and other styles
9

Jaiswal, Prakhar, Anurag Baburao Bajad, Vishwas Grama Nanjundaswamy, Anoop Verma, and Rahul Rai. "Creative Exploration of Scaled Product Family 3D Models Using Gesture Based Conceptual Computer Aided Design (C-CAD) Tool." In ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/detc2013-12279.

Full text
Abstract:
The concepts of scale and platform based product family are being used by many companies to meet the customization needs of customers. Research in the area of product family design predominantly focuses on optimization frameworks. There is a lack of creative conceptual computer-aided 3D modeling tools for product family design exploration. In this paper, a gesture-based conceptual computer-aided design (C-CAD) exploration tool for scaled 3D product family models is presented. The proposed gesture-based C-CAD allows for easy, natural, and intuitive modification of 3D objects to create scaled 3D product family models. The input 3D model for conceptual design exploration purposes are obtained in two ways: (a) 3D model is generated by scanning an existing product using depth sensing (RGB-D) camera, and (b) 3D models available in large online repository such as Google Warehouse and TurboSquid are used as-is. Hand gestures recognized using the DepthSense® 311 (RGB-D) camera from SoftKinetic® are used in conjunction with Principal Component Analysis (PCA) based geometric algorithms to enable the interactive scaling of inputted 3D models. The efficacy of the proposed method is demonstrated through multiple example problems. The proposed method of 3D model exploration is most useful for product designs that are scaled variants.
APA, Harvard, Vancouver, ISO, and other styles
10

Alizon, Fabrice, Callida Williams, Steven B. Shooter, and Timothy W. Simpson. "Merge-Based Design: A New Method for Managing Variety and Improving Customization." In ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/detc2007-34541.

Full text
Abstract:
With markets becoming more and more fragmented, the management of product variety becomes even more critical. Variety management needs to be continuously improved, especially for highly customized products. Although new techniques are constantly being developed, variety is still an issue, and there is room for complementary assistance to manage variety in the final design. In this context, we propose an original method — merge-based design — to manage variety in a product family better. The proposed method targets the already-tailored (unique) components to reduce the number of variant components in the family. Merge-based design also facilitates customization by enabling designers to reduce non-beneficial variety within a family. The proposed method is described and then illustrated via a case study involving two existing internal structures from single-use cameras. Finally, to highlight for improving customization, a proposed new camera is created using the resulting common structure with a different exterior casing. This new method can be applied during detailed studies as well as in the early stages of the design process.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Camera-based product"

1

Hodgdon, Taylor, Anthony Fuentes, Brian Quinn, Bruce Elder, and Sally Shoop. Characterizing snow surface properties using airborne hyperspectral imagery for autonomous winter mobility. Engineer Research and Development Center (U.S.), October 2021. http://dx.doi.org/10.21079/11681/42189.

Full text
Abstract:
With changing conditions in northern climates it is crucial for the United States to have assured mobility in these high-latitude regions. Winter terrain conditions adversely affect vehicle mobility and, as such, they must be accurately characterized to ensure mission success. Previous studies have attempted to remotely characterize snow properties using varied sensors. However, these studies have primarily used satellite-based products that provide coarse spatial and temporal resolution, which is unsuitable for autonomous mobility. Our work employs the use of an Unmanned Aeriel Vehicle (UAV) mounted hyperspectral camera in tandem with machine learning frameworks to predict snow surface properties at finer scales. Several machine learning models were trained using hyperspectral imagery in tandem with in-situ snow measurements. The results indicate that random forest and k-nearest neighbors models had the lowest Mean Absolute Error for all surface snow properties. A pearson correlation matrix showed that density, grain size, and moisture content all had a significant positive correlation to one another. Mechanically, density and grain size had a slightly positive correlation to compressive strength, while moisture had a much weaker negative correlation. This work provides preliminary insight into the efficacy of using hyperspectral imagery for characterizing snow properties for autonomous vehicle mobility.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Camera-based product' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography