Relevant bibliographies by topics / CAM

Academic literature on the topic 'CAM'

Author: Grafiati
Published: 4 June 2021
Last updated: 28 July 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'CAM.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "CAM"

1

Picone, Carmela M., James C. Grotta, Rosa Earls, Roger Strong, and John Dedman. "Immunohistochemical Determination of Calcium—Calmodulin Binding Predicts Neuronal Damage after Global Ischemia." Journal of Cerebral Blood Flow & Metabolism 9, no. 6 (December 1989): 805–11. http://dx.doi.org/10.1038/jcbfm.1989.114.

Full text
Abstract:
Since ionic Ca2+ binds with intracellular calmodulin (CaM) before activating proteases, kinases, and phospholipases, demonstration of persistent Ca2+ –CaM binding in neurons destined to show ischemic cellular injury would support the concept that elevated intracellular Ca2+ plays a causative role in ischemic neuronal damage. In order to characterize Ca2+ –CaM binding, we used a sheep anti-CaM antibody (CaM-Ab) which recognizes CaM that is not bound to Ca2+ or brain target proteins. Therefore, immunohistochemical staining of brain sections by labeled CaM-Ab represented only unbound CaM. Six normal rats were compared to 15 animals rendered ischemic for 30 min by a modification of the four-vessel occlusion model. Animals were killed immediately after ischemia, and after 2 and 24 h of reperfusion. Brain sections through hippocampus were incubated in CaM-Ab, and a diaminobenzadiene labeled anti-sheep secondary antibody was added to stain the CaM-Ab. Staining in the endal limb of dentate, dorsal CA1, lateral CA3, and parietal cortex was graded on a 4-point scale. All normal animals had grade 4 staining indicating the presence of unbound CaM in all four brain regions. Ischemic animals demonstrated reduced (grade 0 to 2) staining in the CA1 and CA3 regions immediately and 2 and 24 h after ischemia (p < 0.01 for both regions at all three time intervals) indicating persistent binding of CaM with Ca2+ and target proteins in these regions. Staining decreased in dentate and cortex up to 2 h after ischemia (p = 0.02 for both regions) but returned toward normal by 24 h. We conclude that while most brain regions demonstrate increased Ca2+ –CaM binding immediately after ischemia, this binding returns to normal in brain regions destined to recover, such as cortex and dentate, but persists beyond 24 h in selectively vulnerable CA1 and partially vulnerable CA3, which are destined to undergo irreversible damage. These findings support the hypothesis that calcium entry into neurons and consequent persistent activation of Ca2+ -dependent enzyme systems leads to irreversible cell damage.
APA, Harvard, Vancouver, ISO, and other styles
2

Babu, Numbury Surendra, and Didugu Jayaprakash. "Computational Study of the Stability of Tautomers and equilibrium constants of Cyanuric acid (CA) in Different solvents." JOURNAL OF ADVANCES IN CHEMISTRY 11, no. 2 (January 22, 2015): 3485–97. http://dx.doi.org/10.24297/jac.v11i2.6691.

Full text
Abstract:
In the present investigation, the tautomeric and equilibrium of Cyanuric acid has been studied using Hartifock (HF) method in the gas phase and different solvents using the PCM model. The relative energies of these tautomers have been calculated at the HF level of theory using 6-311++ G (d,p) basis set. Energetics and relative stabilities of the tautomers were compared and analyzed in both the gaseous and different solvents. The results indicate that the keto tautomer (CA1) is the most stable form in the gas phase and other solvents. The order of stability of isomers was found to be CA1 > CA3> CA11> CA2> CA6> CA10> CA7> CA4> CA5> CA9>CA8. Having the largest dipole moment the CA8 tautomer is expected to have the strongest interaction with polar solvents. The HF method calculated tautomeric equilibrium constants with respect to the most stable tautomer CA1 of Cyanuric acid both in the gas and in different solvents. The of the equilibrium constants calculated starting from the general outline of interconversion.
APA, Harvard, Vancouver, ISO, and other styles
3

Ge, Zheng Hao, Wei Huang, Wei Hua Liu, and Zhi Heng Zhai. "CAD/CAM/CAE for the Parallel Indexing Cam Mechanisms." Applied Mechanics and Materials 44-47 (December 2010): 475–79. http://dx.doi.org/10.4028/www.scientific.net/amm.44-47.475.

Full text
Abstract:
This paper takes the parallel indexing cam mechanism as research object and analyzes the formation of the profile of cam. On the basis of Visual C++6.0 object-oriented method, we have successfully developed the CAD/CAE/CAM system of parallel indexing cam mechanisms, which provides the parameter input dialogue frame with friendly interface. We can generate accurate profile data by using it, then create the three-dimensional model of the parallel indexing cam and assemble it with other parts under the Pro/E environment. At last, we don’t build virtual prototype until we transform the model into ADAMS through special interface Mechanism/Pro. Finally, this paper has researched the theory of contact and collision, carries out the motion simulation. We have received many valuable conclusions of practical application through all of the process.
APA, Harvard, Vancouver, ISO, and other styles
4

RUBANKA, Mykola, Volodymyr DVORZHAK, Zhyhad ZHLALI, YURYJ SHCHERBAN, and VOLODYMYR ONOFRIICHUK. "FEATURES OF THE USE OF MODERN AUTOMATED PROJECTING SYSTEMS OF MACHINE-BUILDING INDUSTRIES." Herald of Khmelnytskyi National University. Technical sciences 329, no. 6 (December 30, 2023): 38–44. http://dx.doi.org/10.31891/2307-5732-2023-329-6-38-43.

Full text
Abstract:
The purpose of the study covered in this publication is to analyze the features of the use of modern automated projecting systems, in particular CAD/CAM/CAE technologies from the point of view of the feasibility of introducing into the technological process of manufacturing products of a machine-building enterprise. The most popular specialized integrated CAD/CAM/CAE systems of the highest category for solving design and technological problems of varying complexity are listed, the features of their use are revealed, the main advantages and disadvantages and the most significant functionality are outlined. The research used a set of general scientific approaches: visual-analytical, systematization of information, modern methods of research of mechanical systems, analysis of scientific literature and method of classification. The most important factors that directly affect the technological process of creating quality products of a modern enterprise of the machine-building industry are highlighted. The choice of the integrated cloud software platform CAD/CAM/CAE Autodesk Fusion 360 for three-dimensional modeling of machine-building industries is substantiated. Certain recommendations have been formulated for the effective use of the CAD/CAM/CAE Autodesk Fusion 360 automated projecting system in the technological processes of the engineering industry. The main specialized modules of the CAD/CAM/CAE Autodesk Fusion 360 computer-aided system are considered to solve complex problems of varying complexity. It is established that the use of modern CAD/CAM/CAE technologies can significantly reduce the complexity of technological processes of manufacturing products of machine-building industries. The scientific novelty of the performed researches is the development of engineering methods of designing a modern high-tech machine-building complex with the use of integrated CAD/CAM/CAE systems.
APA, Harvard, Vancouver, ISO, and other styles
5

Babcock, Donner F., James Herrington, Paul C. Goodwin, Young Bae Park, and Bertil Hille. "Mitochondrial Participation in the Intracellular Ca2+ Network." Journal of Cell Biology 136, no. 4 (February 24, 1997): 833–44. http://dx.doi.org/10.1083/jcb.136.4.833.

Full text
Abstract:
Calcium can activate mitochondrial metabolism, and the possibility that mitochondrial Ca2+ uptake and extrusion modulate free cytosolic [Ca2+] (Cac) now has renewed interest. We use whole-cell and perforated patch clamp methods together with rapid local perfusion to introduce probes and inhibitors to rat chromaffin cells, to evoke Ca2+ entry, and to monitor Ca2+-activated currents that report near-surface [Ca2+]. We show that rapid recovery from elevations of Cac requires both the mitochondrial Ca2+ uniporter and the mitochondrial energization that drives Ca2+ uptake through it. Applying imaging and single-cell photometric methods, we find that the probe rhod-2 selectively localizes to mitochondria and uses its responses to quantify mitochondrial free [Ca2+] (Cam). The indicated resting Cam of 100–200 nM is similar to the resting Cac reported by the probes indo-1 and Calcium Green, or its dextran conjugate in the cytoplasm. Simultaneous monitoring of Cam and Cac at high temporal resolution shows that, although Cam increases less than Cac, mitochondrial sequestration of Ca2+ is fast and has high capacity. We find that mitochondrial Ca2+ uptake limits the rise and underlies the rapid decay of Cac excursions produced by Ca2+ entry or by mobilization of reticular stores. We also find that subsequent export of Ca2+ from mitochondria, seen as declining Cam, prolongs complete Cac recovery and that suppressing export of Ca2+, by inhibition of the mitochondrial Na+/ Ca2+ exchanger, reversibly hastens final recovery of Cac. We conclude that mitochondria are active participants in cellular Ca2+ signaling, whose unique role is determined by their ability to rapidly accumulate and then release large quantities of Ca2+.
APA, Harvard, Vancouver, ISO, and other styles
6

Kubota, Yoshihisa, John A. Putkey, Harel Z. Shouval, and M. Neal Waxham. "IQ-Motif Proteins Influence Intracellular Free Ca2+ in Hippocampal Neurons Through Their Interactions With Calmodulin." Journal of Neurophysiology 99, no. 1 (January 2008): 264–76. http://dx.doi.org/10.1152/jn.00876.2007.

Full text
Abstract:
Calmodulin (CaM) is most recognized for its role in activating Ca2+–CaM-dependent enzymes following increased intracellular Ca2+. However, CaM's high intracellular concentration indicates CaM has the potential to play a significant role as a Ca2+ buffer. Neurogranin (Ng) is a small neuronal IQ-motif–containing protein that accelerates Ca2+ dissociation from CaM. In cells that contain high concentrations of both Ng and CaM, like CA1 pyramidal neurons, we hypothesize that the accelerated Ca2+ dissociation from CaM by Ng decreases the buffering capacity of CaM and thereby shapes the transient dynamics of intracellular free Ca2+. We examined this hypothesis using a mathematical model constructed on the known biochemistry of Ng and confirmed the simulation results with Ca2+ imaging data in the literature. In a single-compartment model that contains no Ca2+ extrusion mechanism, Ng increased the steady-state free Ca2+. However, in the presence of a Ca2+ extrusion mechanism, Ng accelerated the decay rate of free Ca2+ through its ability to increase the Ca2+ dissociation from CaM, which in turn becomes subject to Ca2+ extrusion. Interestingly, PEP-19, another neuronal IQ-motif protein that accelerates both Ca2+ association and dissociation from CaM, appears to have the opposite impact than that of Ng on free Ca2+. As such, Ng may regulate, in addition to the Ca2+–CaM-dependent process, Ca2+-sensitive enzymes by influencing the buffering capacity of CaM and subsequently free Ca2+ levels. We examined the relative impact of these Ng-induced effects in the induction of synaptic plasticity.
APA, Harvard, Vancouver, ISO, and other styles
7

Todorovic, Aleksandar, and Vojkan Lazic. "Computer aided design and manufacturing of dental restorations - “computerized impression” technology." Serbian Dental Journal 53, no. 1 (2006): 42–53. http://dx.doi.org/10.2298/sgs0601042t.

Full text
Abstract:
CAD/CAM technology (Computer Aided Design / Computer Aided Manufacturing) in the matter of fact helps in design and development of two-dimensional or three-dimensional models and their realization on numerical controlled machines. The key to direct or indirect CAD/CAM dental restorations is the measurement of dental preparation in the mouth or on the plaster die. The aim of this paper is to describe the possibilities and the way of function of different computer aided inspection (CAI) systems as a first part of CAD/CAM systems. Different researchers have presented several approaches of methods for three dimensional (3D) measurement. Today, for chairside dental treatment, only the optical method of measurement has lead to satisfactory results in practice. Laboratory CAD/CAM systems use mechanical and optical technologies for 3D measurement. Optical impression grows as a leader of CAI segment of almost every new CAD/CAM system. The most important properties of 3D scanners are: accuracy, volume and speed of measurement and ergonomy of instrument. .
APA, Harvard, Vancouver, ISO, and other styles
8

Rojas Lazo, Oswaldo, and Julio Salas Bacalla. "PRODUCCIÓN AUTOMATIZADA SISTEMAS CAD/CAE/CAM." Industrial Data 2, no. 1 (March 27, 2014): 38. http://dx.doi.org/10.15381/idata.v2i1.6469.

Full text
Abstract:
<span>El presente artículo muestra los resultados de la investigación realizada por los autores sobre el tema y proponen la creación de un laboratorio de producción automatizada con tres áreas definidas: Confecciones, Calzado y Control Numérico.</span>
APA, Harvard, Vancouver, ISO, and other styles
9

Kyratsis, Panagiotis, Konstantinos Kakoulis, and Angelos P. Markopoulos. "Advances in CAD/CAM/CAE Technologies." Machines 8, no. 1 (March 13, 2020): 13. http://dx.doi.org/10.3390/machines8010013.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

KASE, Kiwamu. "An Introduction of Outline of CAD/CAE/CAM/CAT (1)." Journal of the Japan Society for Precision Engineering 79, no. 2 (2013): 144–47. http://dx.doi.org/10.2493/jjspe.79.144.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "CAM"

1

Gandhi, Ashit R. "A CAD/CAM interface for computer-aided design of cams." Thesis, Virginia Tech, 1985. http://hdl.handle.net/10919/41555.

Full text
Abstract:

The purpose of this thesis is to provide a complete package for the design and three dimensional modeling display of cams.

The software produced as a part of this work will operate as a module of CADAM to produce cam designs and enter the resulting cam as a CAD model and produce the graphical display of the cam.

In addition to the introductory material, this thesis is divided into four sections. The section on the graphics packages used in this thesis includes a brief history and capabilities of each of the packages. The second section details the procedure to be adopted in order to design a cam. The next section details ANICAM, the program that has been developed to incorporate the design and display procedure. The fourth section of this thesis contains recommendations for further work in this area.

The theoretical work in this project is a combination of original derivations and applications of the theory in the design literature.


Master of Science
APA, Harvard, Vancouver, ISO, and other styles
2

Silva, Villarroel Gonzalo. "Cestería CAD/CAM en mimbre." Tesis, Universidad de Chile, 2013. http://www.repositorio.uchile.cl/handle/2250/112826.

Full text
Abstract:
Diseñador Industrial
No autorizada por el autor para ser publicada a texto completo
Este proyecto trata, a modo de un proyecto experimental, de una transferencia de conocimiento desde el ámbito digital al área de producción artesanal de objetos. Consiste en el diseño de estructuras personalizables o paramétricas para el tejido en mimbre, que permitan generar objetos modificables y de mayor complejidad morfológica. Resuelve el problema de poco aprovechamiento actual del potencial de creación y conocimiento relacionado con la técnica del tejido en mimbre. Por medio de la forma y ensamble de piezas que, a modo de urdimbre, servirán de base para el tejido realizado por el artesano.
APA, Harvard, Vancouver, ISO, and other styles
3

Dhamija, Dinesh. "Macintosh - Bridgeport communications CAD/CAM." Ohio : Ohio University, 1988. http://www.ohiolink.edu/etd/view.cgi?ohiou1182784285.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Stawarczyk, Bogna. "Langzeitstabilität von CAD/CAM-Kunststoffen." Diss., Ludwig-Maximilians-Universität München, 2013. http://nbn-resolving.de/urn:nbn:de:bvb:19-161094.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Cheikh, Abdelmadjid. "Functional tolerancing in CAD/CAM." Thesis, University of Nottingham, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.278691.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Добротворский, Сергей Семенович, Евгения Владимировна Басова, and Роман Витальевич Головатый. "Опыт создания современных технологий с применением передовых CAD/CAM/CAE систем." Thesis, НТУ "ХПИ", 2015. http://repository.kpi.kharkov.ua/handle/KhPI-Press/20166.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Slivko, Giedrė. "Biologinių neuronų mokymosi savybių tyrimas." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2008. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2008~D_20080902_100150-63821.

Full text
Abstract:
Ankstesni tyrimai, susiję su laikinėmis sinapsinio efektyvumo pasikeitimo taisyklėmis per nuo veikimo potencialų poravimo priklausantį plastiškumą, praktiškai nekreipė jokio dėmesio į neuronų erdvines savybes. Mes nagrinėjame nuo kalcio/kalmodulino priklausančią kinazę II (CaMKII) ir kalcineuriną (CaN) artimuosiuose ir tolimuosiuose spygliuose bei jų įtaką ilgalaikei potenciacijai ir ilgalaikei depresijai. Tyrimų metu buvo atskleista, kad esant neigiamam veikimo potencialų laiko poravimui tolimoje sinapsėje gali vykti ilgalaikė potenciacija, tuo tarpu artimajame spyglyje visi procesai vyksta remiantis klasikinėmis sinapsinio plastiškumo taisyklėmis. Gauti rezultatai teigia, kad sinapsės vieta dendritiniame medyje yra lemiamas veiksnys nuo veikimo potencialų laikų poravimo priklausančiame sinapsiniame plastiškume.
Previous studies focusing on the temporal rules governing changes in synaptic efficacy during spike timing-dependent plasticity (STDP) have paid little attention to spatial characteristics of neurons. We analyze the activity of calcium-calmodulin dependent protein kinase II (CaMKII) and phosphatase calcineurin (CaN) in proximal and distal spines and their impact on long-term potentiation (LTP) and long-term depression (LTD). During tests we found that at negative timing of action potentials in distal spine synapse can undergo LTP while in proximal spine the processes follow the classic STDP rules. Our results suggest that synapse location within the dendritic tree is a crucial determinant of STDP.
APA, Harvard, Vancouver, ISO, and other styles
8

Mazzoni, Simona <1977&gt. "Ricostruzione mandibolare con tecnologia CAD-CAM." Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2013. http://amsdottorato.unibo.it/5622/1/Mazzoni_Simona_Tesi.pdf.

Full text
Abstract:
L’obbiettivo di una ricostruzione micro vascolare di mandibola è quello di assicurare al paziente il miglior risultato estetico e funzionale auspicabile. Ciò può essere conseguito utilizzando il lembo microvascolare di perone/cresta iliaca e una placca ricostruttiva in titanio che funga da guida nella fase di modellamento del lembo per ricreare un contorno parabolico il più possibile simile al profilo mandibolare originario del paziente. Il modellamento manuale ed artigianale intraoperatorio di una placca ricostruttiva è operatore dipendente ed anche in mani molto abili o ricorrendo a modelli anatomici stereolitografici non sempre risulta preciso quanto voluto e spesso non porta ai risultati postoperatori attesi e desiderati. Obbiettivo del nostro studio è stato pertanto, sfruttando le moderne tecnologie CAD-CAM, la produzione di placche ricostruttive “custom -made” progettate direttamente al computer ricreanti il profilo osseo originale del paziente.
This paper describes a new protocol for mandibular reconstruction. CAD/CAM technology was used to manufacture custom-made cutting guides for tumor ablation and reconstructive plates to support fibula free flaps in five patrients presenting oral tumour involving the mandibular bone. CT scan data from the patients were elaborated to produce a virtual surgical plan of mandibular osteotomy in safe tissue for complete ramus/body resection. The CAD/CAM procedure was used to construct a customized surgical device composed of a cutting guide and a titanium reconstructive bone plate. The cutting guide allowed the surgeon to precisely transfer the virtual planned osteotomy into the surgical environment. The bone plate, including in two cases a custom-made anatomical condylar prosthesis, was designed using the outer surface of the healthy side of the mandible to obtain an ideal contour and avoid the bone deformities present on the side affected by the tumor. Operation time was reduced in the demolition and reconstruction phases. Functional and aesthetic outcomes allowed patients to immediately recover their usual appearance and functionality. This new protocol for mandibular reconstruction using CAD/CAM to construct custom-made guides and plates may represent a viable way to reproduce the patient's anatomical contour, give the surgeon better procedural control, and reduce operation time.
APA, Harvard, Vancouver, ISO, and other styles
9

Mazzoni, Simona <1977&gt. "Ricostruzione mandibolare con tecnologia CAD-CAM." Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2013. http://amsdottorato.unibo.it/5622/.

Full text
Abstract:
L’obbiettivo di una ricostruzione micro vascolare di mandibola è quello di assicurare al paziente il miglior risultato estetico e funzionale auspicabile. Ciò può essere conseguito utilizzando il lembo microvascolare di perone/cresta iliaca e una placca ricostruttiva in titanio che funga da guida nella fase di modellamento del lembo per ricreare un contorno parabolico il più possibile simile al profilo mandibolare originario del paziente. Il modellamento manuale ed artigianale intraoperatorio di una placca ricostruttiva è operatore dipendente ed anche in mani molto abili o ricorrendo a modelli anatomici stereolitografici non sempre risulta preciso quanto voluto e spesso non porta ai risultati postoperatori attesi e desiderati. Obbiettivo del nostro studio è stato pertanto, sfruttando le moderne tecnologie CAD-CAM, la produzione di placche ricostruttive “custom -made” progettate direttamente al computer ricreanti il profilo osseo originale del paziente.
This paper describes a new protocol for mandibular reconstruction. CAD/CAM technology was used to manufacture custom-made cutting guides for tumor ablation and reconstructive plates to support fibula free flaps in five patrients presenting oral tumour involving the mandibular bone. CT scan data from the patients were elaborated to produce a virtual surgical plan of mandibular osteotomy in safe tissue for complete ramus/body resection. The CAD/CAM procedure was used to construct a customized surgical device composed of a cutting guide and a titanium reconstructive bone plate. The cutting guide allowed the surgeon to precisely transfer the virtual planned osteotomy into the surgical environment. The bone plate, including in two cases a custom-made anatomical condylar prosthesis, was designed using the outer surface of the healthy side of the mandible to obtain an ideal contour and avoid the bone deformities present on the side affected by the tumor. Operation time was reduced in the demolition and reconstruction phases. Functional and aesthetic outcomes allowed patients to immediately recover their usual appearance and functionality. This new protocol for mandibular reconstruction using CAD/CAM to construct custom-made guides and plates may represent a viable way to reproduce the patient's anatomical contour, give the surgeon better procedural control, and reduce operation time.
APA, Harvard, Vancouver, ISO, and other styles
10

Collin, Andrew (Andrew Paul) Carleton University Dissertation Management Studies. "Factors affecting implementation success of CAD and CAM additions to CAD/CAM systems: operating level personnel's perspective." Ottawa, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "CAM"

1

Miller, Richard Kendall. Survey on CAD/CAM, CAE. Madison, GA: Future Technology Surveys, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Anderl, Reiner, and Pablo Castro. CAD/CAM. Berlin, Heidelberg: Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-93473-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

1938-, Noor Ahmed Khairy, Malone John B, and Langley Research Center, eds. Next generation CAD/CAM/CAE systems. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

1938-, Noor Ahmed Khairy, Malone John B, and Langley Research Center, eds. Next generation CAD/CAM/CAE systems. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Lee, Kunwoo. Principles of CAD/ CAM/ CAE systems. Reading, MA: Addison-Wesley, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

1938-, Noor Ahmed Khairy, Malone John B, and Langley Research Center, eds. Next generation CAD/CAM/CAE systems. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Carl, Machover, and Machover Carl, eds. The CAD/CAM handbook. New York: McGraw-Hill, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Obermann, Karl. CAD/CAM Handbuch. Mu nchen: CAD CAM Verlag fu r Computergrafik, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Eric, Teicholz, ed. CAD/CAM handbook. New York: McGraw-Hill, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Woodland, Andy. CAD/CAM update. Kettering: SATRA, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "CAM"

1

Riley, Frank. "Electronics CAE/CAD/CAM." In The Electronics Assembly Handbook, 491–500. Berlin, Heidelberg: Springer Berlin Heidelberg, 1988. http://dx.doi.org/10.1007/978-3-662-13161-9_77.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gooch, Jan W. "CAD/CAM." In Encyclopedic Dictionary of Polymers, 107. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_1790.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Dietrich, Jochen, and Arndt Richter. "CAD/CAM." In Praxis der Zerspantechnik, 415–51. Wiesbaden: Springer Fachmedien Wiesbaden, 2020. http://dx.doi.org/10.1007/978-3-658-30967-1_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Toriya, Hiroshi, and Hiroaki Chiyokura. "Outline of CAD/CAM/CAE." In 3D CAD, 1–7. Berlin, Heidelberg: Springer Berlin Heidelberg, 1993. http://dx.doi.org/10.1007/978-3-642-45729-6_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kochan, D. "Integration of CAD/CAM." In CAM, 198–232. Berlin, Heidelberg: Springer Berlin Heidelberg, 1986. http://dx.doi.org/10.1007/978-3-642-70272-3_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Anderl, Reiner, and Pablo Castro. "CAD/CAM-Anwendungen." In CAD/CAM, 82–181. Berlin, Heidelberg: Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-93473-5_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Anderl, Reiner, and Pablo Castro. "CAD/CAM-Prozeßketten." In CAD/CAM, 216–73. Berlin, Heidelberg: Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-93473-5_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Anderl, Reiner, and Pablo Castro. "Einleitung." In CAD/CAM, 1–3. Berlin, Heidelberg: Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-93473-5_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Anderl, Reiner, and Pablo Castro. "CAD/CAM-Systeme im Produktentstehungsprozeß." In CAD/CAM, 4–20. Berlin, Heidelberg: Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-93473-5_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Anderl, Reiner, and Pablo Castro. "Merkmale der CAD/CAM-Technologie." In CAD/CAM, 21–35. Berlin, Heidelberg: Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-93473-5_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "CAM"

1

Staubach, Brent. "CAD-CAE-CAM Knowledge/Computer Based." In AIAA International Air and Space Symposium and Exposition: The Next 100 Years. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2003. http://dx.doi.org/10.2514/6.2003-2803.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ziarati, R. "Integrating CAD/CAM." In ASME 1991 International Computers in Engineering Conference and Exposition. American Society of Mechanical Engineers, 1991. http://dx.doi.org/10.1115/edm1991-0192.

Full text
Abstract:
Abstract Many progressive companies have adopted Computer Integrated Manufacturing (CIM) strategy by interfacing drawing and design (CAD), manufacturing (CAM), production planning and Control (PPC, MRPII), inspection and customer services as well as business and management processes. This paper concentrates on aspects of integrating CAD with CAM and offers an example of how CAD information can be transformed into CAM data for given manufacturing operations. The paper pays special references to the basis of many CAD and CAM systems and offers an integrated system which uses a single data base to produce the manufacturing files required enabling the costing based on materials used and manufacturing processes required as well as inspection processes and marketing requirements to be carried out.
APA, Harvard, Vancouver, ISO, and other styles
3

Vickerman, Hal, and Randy Herbeck. "CAD/CAM Today." In SAE International Congress and Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1985. http://dx.doi.org/10.4271/850414.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lee, Chen-Han, Lingyun Lu, Jon Dym, and Guangyan Yin. "Shape Preserving Global Parameterization for CAD/CAM/CAE." In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-60274.

Full text
Abstract:
CAD/CAM/CAE applications often deal with open or closed shells of faces (surfaces). Each face has it’s own 2-D parameter space that may not be rectangular. In many applications we need to merge the individual parameter spaces into a single global parameter space that resembles the model shape in the 3-D physical space. In this paper, we present a method of building such shape-preserving global parameterization (of a shell of faces) that is suitable for CAD/CAM/CAE applications.
APA, Harvard, Vancouver, ISO, and other styles
5

Clark, Brian. "CAD/CAM/CAE for product development process reengineering." In Aircraft Engineering, Technology, and Operations Congress. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1995. http://dx.doi.org/10.2514/6.1995-3974.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Zhou, Haiguang, and Min Han. "CAD/CAM for optomechatronics." In Education and Training in Optics and Photonics. Washington, D.C.: OSA, 2003. http://dx.doi.org/10.1364/etop.2003.ewf7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Zhou, Haiguang, and Min Han. "CAD/CAM for optomechatronics." In Eighth International Topical Meeting on Education and Training in Optics and Photonics, edited by Barry L. Shoop and Grover Swartzlander. SPIE, 2003. http://dx.doi.org/10.1117/12.2208493.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Lapshina, Svetlana N., and Evgenia Kukarskaya. "CAD/CAM applications analysis." In INTERNATIONAL CONFERENCE OF COMPUTATIONAL METHODS IN SCIENCES AND ENGINEERING ICCMSE 2020. AIP Publishing, 2021. http://dx.doi.org/10.1063/5.0048108.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Evans, Garreth. "Beyond CAD/CAM/CIM." In IEE Seminar on Electronic Aids for Increased Profits. IEE, 1995. http://dx.doi.org/10.1049/ic:19950920.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kolesnyk, K. K., E. P. Bruk, and A. S. Dvorchyn. "Automated calculation of piezoresistive microsensors by CAD/CAM/CAE." In 2nd International Conference on Perspective Technologies and Methods in MEMS Design. IEEE, 2006. http://dx.doi.org/10.1109/memstech.2006.288658.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "CAM"

1

Keuthan, Lynn M. CAD/CAM Feasibility Study. Fort Belvoir, VA: Defense Technical Information Center, September 1990. http://dx.doi.org/10.21236/ada226403.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Keuthan, Lynn M. CAD/CAM Feasibility Study. Fort Belvoir, VA: Defense Technical Information Center, September 1990. http://dx.doi.org/10.21236/ada226554.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Domm, T. C., and R. S. Underwood. Model-Based Engineering and Manufacturing CAD/CAM Benchmark. Office of Scientific and Technical Information (OSTI), October 1999. http://dx.doi.org/10.2172/14442.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Domm, T. D., and R. S. Underwood. Model-Based Engineering and Manufacturing CAD/CAM Benchmark. Office of Scientific and Technical Information (OSTI), April 1999. http://dx.doi.org/10.2172/6890.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bowden, Gordon B. Roller Cam Positioners. Office of Scientific and Technical Information (OSTI), December 2010. http://dx.doi.org/10.2172/1000327.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Muto, Kazuo. Trend of 3D CAD/CAE/CAM/CAT/Network Systems and PLM System in Advance Technology for Manufacturing Engineering Development. Warrendale, PA: SAE International, May 2005. http://dx.doi.org/10.4271/2005-08-0137.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Lindqvist, Ulf, Steven Cheung, and Rico Valdez. Correlated Attack Modeling (CAM). Fort Belvoir, VA: Defense Technical Information Center, October 2003. http://dx.doi.org/10.21236/ada419251.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Blumberg, Roger, and Jennifer Dorris. Connecting American Manufacturing (CAM). Fort Belvoir, VA: Defense Technical Information Center, December 2013. http://dx.doi.org/10.21236/ada595126.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Gabbey, D. J., J. Lee, and D. J. Patterson. CAM/LIFTER forces and friction. Office of Scientific and Technical Information (OSTI), February 1992. http://dx.doi.org/10.2172/5705342.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Dimova-Gabrovska, Mariyana. Methodology for Composite CAD/CAM Crown Restoration of Lateral Deciduous Teeth. "Prof. Marin Drinov" Publishing House of Bulgarian Academy of Sciences, May 2021. http://dx.doi.org/10.7546/crabs.2021.05.17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'CAM' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography