Books on the topic 'Bulk chemical'

Anisfeld, Michael H. International biotechnology, bulk chemical, and pharmaceutical GMPs. 5th ed. Denver, Colo: Interpharm Press, 1999.

United States. Coast Guard. Marine Technical and Hazardous Materials Division., ed. Chemical data guide for bulk shipment by water. 7th ed. [Washington]: U.S. Dept. of Transportation, U.S. Coast Guard, 1990.

Hänninen, Saara. Transportation of liquid bulk chemicals by tankers in the Baltic Sea. Espoo, Finland: VTT Technical Research Centre of Finland, 2006.

1937-, Wise Donald L., Levendis Y. A, and Metghalchi M, eds. Calcium magnesium acetate: An emerging bulk chemical for environmental applications. Amsterdam: Elsevier, 1991.

Merrow, Edward W. A quantitative assessment of R&D requirements for solids processing technology. Santa Monica, CA: Rand, 1986.

Dietmar, Schulze. Powders and bulk solids: Behavior, characterization, storage and flow. Berlin: Springer, 2008.

Haasz, A. A. The effect of bulk hydrogen inventory on the chemical erosion of graphite. Mississauga, Ont: CFFTP, 1985.

Haasz, A. A. The effect of bulk hydrogen inventory on the chemical erosion of graphite. [S.l.]: [s.n.], 1986.

Hiltmar, Schubert, and Kuznetsov Andrey, eds. Detection of bulk explosives: Advanced techniques against terrorism. Dordrecht: Kluwer Academic Publishers, 2004.

Lane, J. Physical properties and bulk chemical composition of continental shelf and slope sediments of Australia. Canberra: Geological Survey Organisation, 1993.

W. J. B. van den Bergh. Simulation of the dynamic mixing performance of an orbiting screw mixer. Netherland: Delft University of Technology, Faculty of Meachnical Engineering and Marine Technology, 1994.

Organization, International Maritime, ed. IBC code: International code for the construction and equipment of ships carrying dangerous chemicals in bulk : with standards and guidelines relevant to the code. 2nd ed. London: International Maritime Organization, 2007.

World conference on sampling and blending (2nd 2005 Sunshine Coast, Queensland). Second world conference on sampling and blending 2005: 10-12 May 2005, Sunshine Coast, Queensland, Australia. Carlton, Vic: Australasian Institute of Mining and Metallurgy, 2005.

World conference on sampling and blending (1st 2003 Aalborg, Denmark). Special issue:50 years of Pierre Gy's theory of sampling Proceedings: First world conference on sampling and blending (WCSB1): Tutorials on sampling: theory and practice : Aalborg, Denmark, August 19-22, 2003. Amsterdam: Elsevier, 2003.

Organization, International Maritime, ed. Guidelines on surveys required by the 1978 SOLAS Protocol, the International Bulk Chemical Code and the International Gas Carrier Code. London: IMO, 1987.

Chemicals, Eastman Fine. Bulk chemicals: Catalog. New York: Eastman Kodak, 1992.

Angel, Abbud-Madrid, and United States. National Aeronautics and Space Administration., eds. Ignition and combustion characteristics of pure bulk metals: Normal-gravity test results : 32nd Aerospace Sciences Meeting & Exhibit, January 10-13, 1994/Reno, NV. Washington, D.C: American Institute of Aeronautics and Astronautics, 1994.

Shipping, American Bureau of. Rules for building and classing vessels intended to carry liquefied gases and chemical cargoes in bulk: Section 24, Rules for building and classing steel vessels, 1991. Paramus, N.J. (P.O. Box 910, Paramus 07653-0910): American Bureau of Shipping, 1991.

Unit operations of particulate solids: Theory and practice. Boca Raton, FL: CRC Press, 2012.

Seminar and Meeting on Ceramics, Cells, and Tissues (11th 2007 Faenza, Italy). Ceramics, cells, and tissues: Nanotechnology for functional repair and regenerative medicine : the role of ceramics as in bulk and as coating. Rome: Consiglio nazionale delle ricerche, 2008.

United States. Agricultural Marketing Service. Food Quality Assurance Branch. Effects of freezing rate, storage temperature, temperature abuse and storage time on sensory, chemical, and yield properties of bulk ground beef with soy: Final report. Beltsville, Md: The Laboratory, 1986.

Xian, Mo, ed. Sustainable Production of Bulk Chemicals. Dordrecht: Springer Netherlands, 2015. http://dx.doi.org/10.1007/978-94-017-7475-8.

Daniel, Harpaz, and Berry Ira R. 1942-, eds. Validation of bulk pharmaceutical chemicals. Buffalo Grove, Ill: Interpharm Press, 1997.

New York (State). Division of Water, ed. Chemical bulk storage, draft regulations: 6 NYCRR Part 598, Handling and storage of hazardous substances : 6 NYCRR Part 599, Standards for new and substantially modified hazardous substance storage facilities. [Albany, N.Y.?]: New York State/Dept. of Environmental Conservation, 1989.

1939-, Yang Wen-ching, ed. Fluidization, solids handling, and processing: Industrial applications. Westwood, NJ: Noyes Publications, 1998.

United States. Food and Drug Administration. Division of Field Investigations., ed. Guide to inspections of bulk pharmaceutical chemicals. [Rockville, Md.?]: Division of Field Investigations, Office of Regional Operations, Office of Regulatory Affairs, U.S. Food & Drug Administration, 1994.

United States. Food and Drug Administration. Division of Field Investigations, ed. Guide to inspections of bulk pharmaceutical chemicals. [Rockville, Md.?]: Division of Field Investigations, Office of Regional Operations, Office of Regulatory Affairs, U.S. Food & Drug Administration, 1994.

McBurney, Graeme Thomas. Implementation of the American Food and Drug Administration code of federal regulations for pharmaceutical and bulk chemical good manufacturing practice into a pharmaceutical company operating to European Community good pharmaceutical manufacturing practices. [s.l: The Author], 1994.

G, Lynn Barbara M., American Bar Association. Subcommittee on Chemical and Industrial Equipment Manufacturers., and American Bar Association. Section of Litigation., eds. Component part manufacturer and bulk supplier liability in products liability cases: A fifty-state survey : a report of the Subcommittee on Chemical and Industrial Equipment Manufacturers of the Products Liability Litigation Committee. Chicago, IL: The Association, 1999.

Organization, International Maritime. International code for the construction and equipment of ships carrying dangerous chemicals in bulk (BCH code). London: IMO, 1994.

Organization, International Maritime, and International Maritime Organization. Marine Environment Protection Committee., eds. Guidelines for the provisional assessment of liquids transported in bulk. London: IMO, 1997.

Simmons, Paul L. Introduction to good manufacturing practice regulations: Drugs, devices, diagnostics, biotechnology, and bulk pharmaceutical chemicals. [Tampa, Fla., USA]: International Center for Technology Transfer, 1988.

Organization, International Maritime, ed. Index of dangerous chemicals carried in bulk (including references to UN and MFAG numbers) related to the Code for the construction and equipment of ships carrying dangerous chemicals in bulk (1986 edition) and the International code for the construction and equipment of ships carrying dangerous chemicals in bulk (1986 edition). London: IMO, 1987.

Organization, International Maritime, ed. Index of dangerous chemicals carried in bulk (including references to UN and MFAG numbers) related to the Code for the construction and equipment of ships carrying dangerous chemicals in bulk (1990 edition) and the International code for the construction and equipment of ships carrying dangerous chemicals in bulk (1990 edition). 3rd ed. London: IMO, 1990.

International Maritime Organization. Maritime Safety Committee. and International Maritime Organization. Marine Environment Protection Committee., eds. International code for the construction and equipment of ships carrying dangerous chemicals in bulk (IBC code). 3rd ed. London: IMO, 1990.

Simmons, Paul L. The impact of GMP's on the manufacture of bulk pharmaceutical chemicals/biologics: Drugs, diagnostics, biotechnology. Tampa, Fla: International Center for Technology Transfer, 1988.

Organization, International Maritime. Code for the construction and equipment of ships carrying dangerous chemicals in bulk: Adopted by the IMO Assembly on 12 October as resolution A.212(VII). London [England]: IMO, 1985.

Pharmaceutical and Bulk Chemical. Interpharm Pr, 1994.

Pharmaceutical and Bulk Chemical Gmps (21 Cfr211). Interpharm Pr, 1994.

Anisfeld, Michael H. International Biotechnology, Bulk Chemical, and Pharmaceutical GMPs. Taylor & Francis Group, 1999.

Anisfeld, Michael H. International Biotechnology, Bulk Chemical, and Pharmaceutical GMPs. Informa Healthcare, 1999.

Guide to Inspection of Bulk Pharmaceutical Chemical Manufacturing. Interpharm Pr, 1994.

Anisfeld, Michael H. International Biotechnology, Bulk Chemical, and Pharmaceutical GMPs, Fifth Edition. Taylor & Francis Group, 1999.

Xian, Mo. Sustainable Production of Bulk Chemicals: Integration of Bio‐,Chemo‐ Resources and Processes. Springer, 2015.

Xian, Mo. Sustainable Production of Bulk Chemicals: Integration of Bio‐，Chemo‐ Resources and Processes. Springer, 2016.

International code for the construction and equipment of ships carrying dangerous chemicals in bulk: (IBC code) ; and Index of dangerous chemicals carried in bulk. London: IMO, 1998.

Calcium magnesium acetate: An emerging bulk chemical for environmental applications. Amsterdam: Elsevier, 1992.

Xian, Mo. Sustainable Production of Bulk Chemicals: Integration of Bio‐，Chemo‐ Resources and Processes. Springer, 2015.

Forum, Oil Companies International Marine. Vessel Inspection Questionnaire for Bulk Oil, Chemical Tankers and Gas Carriers. 2nd ed. Witherby & Co Ltd, 2000.

Zhu, Chao, and Liang-Shih Fan. Principles of Gas-Solid Flows (Cambridge Series in Chemical Engineering). Cambridge University Press, 2005.