Books on the topic 'Buckling'

Lindberg, Herbert E., and Alexander L. Florence. Dynamic Pulse Buckling. Dordrecht: Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3657-7.

Byskov, Esben. Selected buckling problems. Lyngby, Denmark: Department of Structural Engineering, Technical University of Denmark, 1990.

G, Falzon B., and Aliabadi M. H, eds. Buckling and post buckling structures: Experimental, analytical and numerical studies. London: Imperial College Press, 2008.

Johann, Arbocz, and Weller T, eds. Buckling experiments: Experimental methods in buckling of thin-walled structures. Chichester: Wiley, 1998.

Shama, Mohamed. Buckling of Ship Structures. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-17961-7.

Shama, Mohamed. Buckling of Ship Structures. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013.

Kachanov, L. M. Delamination Buckling of Composite Materials. Dordrecht: Springer Netherlands, 1988. http://dx.doi.org/10.1007/978-94-009-2819-0.

Bushnell, D. Computerized buckling analysis of shells. Dordrecht: Springer Netherlands, 1985. http://dx.doi.org/10.1007/978-94-009-5063-4.

Akbarov, Surkay. Stability Loss and Buckling Delamination. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-30290-9.

C, Chamis C., and United States. National Aeronautics and Space Administration., eds. Probabalistic progressive buckling of trusses. [Washington, DC]: National Aeronautics and Space Administration, 1991.

Thompson, Randolph C. Thermal-structural panel buckling tests. Edwards, Calif: National Aeronautics and Space Administration, Ames Research Center, Dryden Flight Research Facility, 1991.

S, Kitipornchai, ed. Buckling of thick skew plates. Brisbane: University of Queensland, Dept. of Civil Engineering, 1992.

Fan, Chun Keung Roger. Buckling in continuous composite beams. [s.l.]: typescript, 1990.

Computerized buckling analysis of shells. Dordrecht: M. Nijhoff, 1985.

Computerized buckling analysis of shells. Dordrecht: Springer Netherlands, 1985.

Riks, E. The B2000 linear buckling processor. Amsterdam: National Aerospace Laboratory, 1988.

Michael, Rotter J., ed. Buckling of thin metal structures. London: Spon Press, 2003.

Delamination buckling of composite materials. Dordrecht: Kluwer, 1988.

Hakmi, Mohammed Raheef. Local buckling of sandwich panels. Salford: University of Salford, 1988.

Thompson, Randolph C. Thermal-structural panel buckling tests. Edwards, Calif: National Aeronautics and Space Administration, Ames Research Center, Dryden Flight Research Facility, 1991.

Essa, Hesham S. Distortional buckling of steel beams. Edmonton, Alta., Canada: Dept. of Civil Engineering, University of Alberta, 1993.

Pai, Shantaram S. Probablistic progressive buckling of trusses. [Washington, DC]: National Aeronautics and Space Administration, 1991.

Teng, J. G. Buckling of thin metal shells. London: Spon Press, 2004.

Dux, P. F. Buckling of suspended I-beams. St. Lucia: University of Queensland, Dept. of Civil Engineering, 1988.

Ho, William L. Compressive buckling analysis of hat-stiffened panel. Edwards, Calif: Dryden Flight Research Facility, 1991.

Zhong, H. G. A hybrid procedure for the solution of mode jumping problems. London: Imperial College of Science, Technology & Medicine, Dept. of Aeronautics, 1996.

J, Turvey G., and Marshall I. H, eds. Buckling and postbuckling of composite plates. London: Chapman & Hall, 1995.

Sun, Guojun. Optimization of laminated cyclinders for buckling. [Downsview, Ont.]: [Institute for Aerospace Studies], 1986.

Turvey, G. J., and I. H. Marshall, eds. Buckling and Postbuckling of Composite Plates. Dordrecht: Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-011-1228-4.

Dickel, Timm, Heinz-Peter Klemens, and Heinrich Rothert. Ideale Biegedrillknickmomente / Lateral-Torsional Buckling Coefficients. Wiesbaden: Vieweg+Teubner Verlag, 1991. http://dx.doi.org/10.1007/978-3-663-14083-2.

Lee, A. S. Buckling analysis of spent fuel basket. Washington, D.C: Division of Industrial and Medical Nuclear Safety, Office of Nuclear Material Safety and Safeguards, U.S. Nuclear Regulatory Commission, 1995.

G, Greimann L., U.S. Nuclear Regulatory Commission. Office of Nuclear Reactor Regulation. Division of Engineering., and Ames Laboratory, eds. Buckling evaluation of System 80+ containment. Washington, DC: Division of Engineering, Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission, 1994.

Stress analysis: Bending, torsion and buckling. Milton Keynes: Open University, 2007.

Sung, Guojun. Optimization of laminated cylinders for buckling. [Downsview, Ont.]: Institute for Aerospace Studies, 1987.

M, Jones Robert. Buckling of bars, plates, and shells. Blacksburg, VA: Bull Ridge Publishing, 2007.

1928-, Florence Alexander L., ed. Dynamic pulse buckling: Theory and experiment. Dordrecht: M. Nijhoff, 1987.

Jones, Robert. Buckling of Bars, Plates and Shells. Blacksburg, Virginia: Bull Ridge Publishing, 2006.

Lindberg, Herbert E. Dynamic Pulse Buckling: Theory and Experiment. Dordrecht: Springer Netherlands, 1987.

Turvey, G. J. Buckling and Postbuckling of Composite Plates. Dordrecht: Springer Netherlands, 1995.

M, Jones Robert. Buckling of bars, plates, and shells. Blacksburg, Va: Bull Ridge Publishing, 2006.

Simitses, George J. An introduction to the elastic stability of structures. Malabar, Fla: R.E. Krieger Pub. Co., 1986.

Center, Langley Research, ed. The analysis of non-linear dynamic behavior (including snap-through) of postbuckled plates by simple analytical solution. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1988.

United States. National Aeronautics and Space Administration., ed. Postbuckling behavior of fiber reinforced plates and curved panels. Washington, DC: National Aeronautics and Space Administration, 1987.

United States. National Aeronautics and Space Administration., ed. Shear buckling of specially orthotropic plates with centrally located cutouts: NASA reasearch grant NAS 1-917 semi annual report. [Washington, DC: National Aeronautics and Space Administration, 1991.

Center, Langley Research, ed. Nondimensional parameters and equations for buckling of symmetrically laminated thin elastic shallow shells. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1991.

Whitcomb, John D. Three-dimensional analysis of a postbuckled embedded delamination. Hampton, Va: Langley Research Center, 1988.

Daniel, Sydow P., Librescu Liviu, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., eds. Postbuckling response of long thick isotropic plates loaded in compression including higher order transverse shearing effects. [Washington, DC]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1990.

Center, Langley Research, ed. The analysis of non-linear dynamic behavior (including snap-through) of postbuckled plates by simple analytical solution. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1988.

Buckling and Post-Buckling. Berlin/Heidelberg: Springer-Verlag, 1987. http://dx.doi.org/10.1007/bfb0009196.

Buckling of Structures. Elsevier, 1988. http://dx.doi.org/10.1016/c2009-0-09697-4.