Log in

Relevant bibliographies by topics / Brzoza / Dissertations / Theses

Dissertations / Theses on the topic 'Brzoza'

To see the other types of publications on this topic, follow the link: Brzoza.

Author: Grafiati

Published: 25 July 2024

Last updated: 31 July 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Brzoza.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Ryšková, Marie. "Hydrodynamická brzda." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-401536.

Full text

Abstract:

This thesis is devoted to the design of hydraulic retarder, with emphasis on CFD simulation. The thesis is based on simulation of flow in hydraulic retarder with included transformation of heat. The generation of heat at breaking with hydraulic retarder significantly influences amount of created moment. With use of simulations the anticipated breaking moment emerging on break of a spinning wheel from the design is verified. A group of brake models, in which the hydraulic break belongs to, is introduced in the beginning chapters. This following chapter focuses on design of simulation model that corresponds with the process of breaking. Simple 1D mathematical model for filling the brake with oil using compressed air is introduced.

APA, Harvard, Vancouver, ISO, and other styles

2

Tumas, Jolanta. "Językowo-kulturowy obraz dębu, brzozy i wierzby (na materiale polskim i litewskim)." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2005. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2005~D_20050607_144044-23899.

Full text

Abstract:

This dissertation is about oak, birch and willow in polish and lithuanian language and culture. The job gives the answer, what place engage oak, birch and willow in folklore, in religion, in magic, what symbolize and what are expressed. Main purpose is: what does trees means for polish and lithuanian countryman.

APA, Harvard, Vancouver, ISO, and other styles

3

Lacheta, Lukáš. "Pomocná brzda pro eskalátor." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-227977.

Full text

Abstract:

Purpose of engaged task is elaborate a functional mechanism to emergency brake for escalators company Otis. To this purpose is gradually reached up in several phases. In primary phase was taken view on similar products from competitive company and do not get in conflict with patent right, in second phase was needed delimitate working space for brake and exact specification of straining. In next steps the proposal and test phase is blending together. In this moment emergency brake has own shape and first tests are showing the functions, but as well necessity modification of same elements on brake and on escalator.

APA, Harvard, Vancouver, ISO, and other styles

4

Vít, Jakub. "Odstředivá brzda motoru pro pneumatikový válec." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232084.

Full text

Abstract:

The aim of my thesis is the design of centrifugal brakes to prevent twisting of the combustion engine with pneumatic compactor. In the first part of my thesis I deal with existing and similar systems that prevent over speeding. In the second part I deal with the design of its own centrifugal brake. This includes basic functional, strength, thermal calculation, design of components and fabrication drawings according to the assignment.

APA, Harvard, Vancouver, ISO, and other styles

5

Aleksandar, Čabrilo. "Mehaničke osobine i brzina rasta zamorne prsline u zavarenom spoju pancirnog čelika." Phd thesis, Univerzitet u Novom Sadu, Fakultet tehničkih nauka u Novom Sadu, 2018. https://www.cris.uns.ac.rs/record.jsf?recordId=107385&source=NDLTD&language=en.

Full text

Abstract:

Cilj rada je bila izrada kvalitetnog zavarenog spoja pancirnog čelika.Zavareni spoj poseduje dobre zatezne karakteristike, kao i visoku energijuudara u metal šavu i ZUT-u, visoku otpornost na propagaciju prsline umetal šavu i ZUT-u. Osnovni materijal ima najveću zateznu čvrstoću,najnižu energiju udara, najmanju žilavost loma i otpornost na propagacijuprsline. Nakon balističkih ispitivanja ustanovljeno je da ZUT i osnovnimaterijal poseduju balističku otpornost, dok metal šava ne zadovoljavastandarde. Ispitivanjem gasne hromatografije ustanovljena je niskakoličina difundovanog i zadržanog vodonika u zoni metal šava. U skladusa tim se zaključuje da su parameteri zavarivanja, kao i dodatni materijalodgovarajuće izabrani. Na osnovu ispitivanja brzine rasta zamorneprsline, određen je preostali vek oklopnih vozila koja se prave odpancirnog čelika.
The aim of this paper was to produce a high-quality welded joint of armored steel.The welded joint has good tensile properties, as well as a high impact energy inthe weld metal and HAZ, and high resistance to crack propagation in the weldmetal and HAZ. The base metal has the highest tensile strength, the lowestimpact energy and the smallest fracture toughness and crack propagationresistance. After ballistic testing, the HAZ and basic metals have been found tohave ballistic resistance, while the weld metal does not meet the standards. Gaschromatography analysis detected a low amount of diffused and retainedhydrogen in the metal seam zone. It may therefore be concluded that the weldingparameters and the additional material have been appropriately selected.Based on the study of the fatigue crack growth rate, the fatigue life of armoredvehicles was predicted.

APA, Harvard, Vancouver, ISO, and other styles

6

Strmenský, Tomáš. "Švajčiarska rozpočtová brzda - komparácia s rozpočtovými politikami Nemecka a USA." Master's thesis, Vysoká škola ekonomická v Praze, 2010. http://www.nusl.cz/ntk/nusl-113832.

Full text

Abstract:

The thesis deals with fiscal policy and fiscal rules. The thesis investigates the cause and effect of the deficit bias and rules, which are designed to reduce it. Specifically, the cases of constitutional swiss expenditure debt brake, US deficit brake from the 1980s and also the recently reformed german fiscal rule are discussed.

APA, Harvard, Vancouver, ISO, and other styles

7

Sositko, Sławomir. "Ocena potrzeb wodnych i nawodnieniowych brzozy brodawkowatej (Betula pendula Roth.) oraz lipy drobnolistnej (Tilia cordata Mill.) w nasadzeniach fitomelioracyjnych na gruncie porolnym." Rozprawa doktorska, Uniwersytet Technologiczno-Przyrodniczy w Bydgoszczy, 2019. http://dlibra.utp.edu.pl/Content/1505.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Akberdiyev, Dauren [Verfasser], and Michael [Akademischer Betreuer] Brzoska. "Die Diversifizierung internationaler sicherheitspolitischer Kooperation Kasachstans von der Unabhängigkeitserklärung bis zur Gegenwart / Dauren Akberdiyev. Betreuer: Michael Brzoska." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2016. http://d-nb.info/1082347590/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Akberdiyev, Dauren Verfasser], and Michael [Akademischer Betreuer] [Brzoska. "Die Diversifizierung internationaler sicherheitspolitischer Kooperation Kasachstans von der Unabhängigkeitserklärung bis zur Gegenwart / Dauren Akberdiyev. Betreuer: Michael Brzoska." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2016. http://nbn-resolving.de/urn:nbn:de:gbv:18-77026.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Kühn, Ulrich Thomas [Verfasser], and Michael [Akademischer Betreuer] Brzoska. "Cooperative arms control in Europe (1973-2014) : a case of regime decay? / Ulrich Kühn. Betreuer: Michael Brzoska." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2016. http://d-nb.info/1106404556/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Völker, Denise [Verfasser], and Michael [Akademischer Betreuer] Brzoska. "Konfliktfaktor Waldschutz? : Analyse der Widerstände gegen Waldschutzgebiete an der Fernstraße BR-163 im brasilianischen Amazonasbecken / Denise Völker. Betreuer: Michael Brzoska." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2015. http://d-nb.info/1076359981/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Burilkov, Alexandr [Verfasser], and Michael [Akademischer Betreuer] Brzoska. "The Maritime Strategy of Regional Powers: China, India, Iran, and Brazil from 2001 to 2015 / Alexandr Burilkov ; Betreuer: Michael Brzoska." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2017. http://d-nb.info/1128310139/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Jeremias, Gunnar [Verfasser], and Michael [Akademischer Betreuer] Brzoska. "Zivilgesellschaftliche Rüstungskontrolle - NGOs als Akteure im Compliancemonitoring : das Beispiel des Regimes zum Verbot Biologischer Waffen / Gunnar Jeremias. Betreuer: Michael Brzoska." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2015. http://d-nb.info/1076359965/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Faß, Eric [Verfasser], Torsten [Gutachter] Schlesinger, Patrick [Gutachter] Brzoska, and Michael [Gutachter] Mutz. "Sozioökonomische Analysen zu körperlich-sportlicher Aktivität und subjektiver Gesundheit im Alter / Eric Faß ; Gutachter: Torsten Schlesinger, Patrick Brzoska, Michael Mutz ; Fakultät für Sportwissenschaft." Bochum : Ruhr-Universität Bochum, 2021. http://d-nb.info/122969479X/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Grauvogel, Julia [Verfasser], and Michael [Akademischer Betreuer] Brzoska. "The 'Internal Opposition' Effect of International Sanctions : Insights from Burundi, Zimbabwe and a Qualitative Comparative Analysis of Sub-Saharan Africa / Julia Grauvogel ; Betreuer: Michael Brzoska." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2018. http://d-nb.info/1150401370/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Kubiak, Katarzyna Anna [Verfasser], and Michael [Akademischer Betreuer] Brzoska. "Poland and the B61 : Theory-led Analysis of the Polish Official Position on American Extended Nuclear Deterrence in Europe / Katarzyna Anna Kubiak ; Betreuer: Michael Brzoska." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2018. http://d-nb.info/1152384333/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Bernath, Andreas [Verfasser], and Michael [Akademischer Betreuer] Brzoska. "Klimakatastrophen, Vertreibung und Gewalt : eine makro-qualitative Untersuchung sowie eine Einzelfallstudie über den Zusammenhang von umweltbedingten Bevölkerungsbewegungen und gewaltsamen Konflikten / Andreas Bernath. Betreuer: Michael Brzoska." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2016. http://d-nb.info/1095766511/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Bernath, Andreas Verfasser], and Michael [Akademischer Betreuer] [Brzoska. "Klimakatastrophen, Vertreibung und Gewalt : eine makro-qualitative Untersuchung sowie eine Einzelfallstudie über den Zusammenhang von umweltbedingten Bevölkerungsbewegungen und gewaltsamen Konflikten / Andreas Bernath. Betreuer: Michael Brzoska." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2016. http://nbn-resolving.de/urn:nbn:de:gbv:18-78239.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Nováček, Vladislav. "Konstrukce MR spojky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229390.

Full text

Abstract:

This thesis deals with the design of the magnetorheological (MR) clutch. The extensive literature research with particular conclusions to each design variant of MR clutches or brakes has been done in the first part of the thesis. The second part of the thesis describes the design of the actual MR clutch based on the results of the analytical calculation of the magnetic circuit. Finally, the experiments verifying the function of the key segments of the clutch, and the whole clutch are summarized in the third part of the thesis.

APA, Harvard, Vancouver, ISO, and other styles

20

Milan, Šolaja. "Efekti eksperimentalnog tretmana na razvoj brzinske izdržljivosti kod devojčica." Phd thesis, Univerzitet u Novom Sadu, Fakultet sporta i fizičkog vaspitanja u Novom Sadu, 2016. https://www.cris.uns.ac.rs/record.jsf?recordId=101237&source=NDLTD&language=en.

Full text

Abstract:

U našoj zemlji je malo objavljenih istraživanja iz oblasti kako brzinske izdržljivosti kod devojčica, tako i eksperimentalnih tretmana koji bi doveli do povećanja ove motoričke sposobnosti. U samoj atletici ova tema nije dovoljno istraživana s’ obzirom da je veoma puno prisutna u praksi. Osnovni cilj studije bio je da se utvrdi efekat eksperimentalnog tretmana na brzinsku izdržljivost devojčica.Uzorak ispitanika ovog istraživanja činilo je 100 devojčica, uzrasta između 13 i 15 godina iz Novog Sada, koje su uključene u trenažni proces u sportskim klubovima. Uzorak ispitanika je bio podeljen na eksperimentalnu grupu, koju je činilo 50 devojčica i koja je realizovala eksperimentalni plan i program i kontrolnu grupu, sa takođe, 50 devojčica, koja je realizovala treninge po programu Evropske atletske federacije “Kid’s athletics”, u trajanju od 15 nedelja. Testirane su razlike u antropološkim karakteristikama i u motoričkim sposobnostima, koje su se ogledale u efikasnosti primenjenog eksperimentalnog tretmana grupa.U istraživanju je primenjeno 18 varijabli: 6 antropometrijskih, 10 motoričkih i 2 varijable za procenu specifičnih motoričkih sposobnosti. Razlike u antropološkim karakteristikama, motoričkim sposobnostima i brzinskoj izdržljivosti između eksperimentalne i kontrolne grupe analizirane su multivarijatnom analizom varijanse, univarijatnom analizom varijanse i diskriminativnom analizom, dok su sami efekti eksperimentalnog tretmana utvrđeni na osnovu multivarijatne analize kovarijanse.Program rada eksperimentalne i kontrolne grupe realizovan je u okviru redovnih treninga u sportskim klubovima. Trenažni plan i program je sprovođen tri puna nedeljno, za obe testirane grupe. Eksperimentalna grupa je realizovala trenažne jedinice po modelovanom eksperimentalnom tretmanu, koji je sačinjen u skladu sa osnovnim principima trenažnog procesa i periodizacijom istog, i na osnovu bogatog višegodišnjeg iskustva autora i adekvatne literature najboljih svetskih autora aktuelne oblasti. Kontrolna grupa je realizovala trenažne jedinice po programu Evropske atletske federacije “Kid’s athletics”.Dobijeni rezutati u pogledu antropometrijskih karakteristika ukazuju da je primenjeni eksperimentalni tretman uticao na postojanje statistički značajnih razlika u sistemu pojedinih primenjenih antropometrijskih varijabli. U prostoru motoričkih sposobnosti takođe su utvrđene statistički značajne razlike između grupa nakon primenjenih različitih tretmana.Kada su u pitanju specifične motoričke sposobnosti, odnosno varijable za procenu brzinske izdržljivosti devojčica, analiza kovarijanse je takođe ukazala na statističku značajnost razlika u sistemu primenjenih varijabli. Eksperimentalna grupa je statistički značajno napredovala u obe varijable kojima je testirana brzinska izdržljivost devojčica.Osnovni cilj studije bio je da se utvrdi efekat eksperimentalnog tretmana na brzinsku izdržljivost devojčica, a rezultati univarijantne analize kovarijanse i multivarijatne analize kovarijanse su potvrdili statistički značajnu razliku u korist eksperimentalne grupe.Na osnovu dobijenih rezultata može se zaključiti da je predloženi eksperimentalni tretman u eksperimentalnoj grupi doprineo značajnim razlikama u brzinskoj izdržljivosti. Rezultati koji su dobijeni u finalnom merenju i upoređivanjem motoričkih sposobnosti između eksperimentalne i kontrolne grupe, potvrdili su dosadašnja naučna i teorijska znanja, da prostor specifične izdržljivosti u brzini egzistira kao posebna sposobnost na koju se adekvatnim tretmanom može pozitivno uticati i doći do napretka koji je statistički značajan. Značaj ove studije je u direktnoj i neposrednoj primeni, ovog tretmana, gde se bolji rezultati postižu usmeravanjem tretmana na ciljane distance koje su po strukturi i vremenskom trajanju slične onim koje su testirane kao kriterijske varijable.
There is little published research in our country in girls’ speed endurance and experimental treatments which would increase this motor ability. This issue is not sufficiently investigated in the athletics, despite the fact that it is very much present in practice. The main objective of the study was to determine the effect of experimental treatment on girls’ speed endurance.The sample of this study consisted of 100 girls, aged between 13 and 15 years old, from Novi Sad, who are involved in the training process in sports clubs. The sample was divided into an experimental group, which consisted of 50 girls and implemented experimental plan and program and the control group with 50 girls as well, which conducted trainings according to the program of the European Association of Athletics Federations' “Kid's athletics”, in a 15 weeks period. The differences in the anthropological characteristics and motor skills were tested, which were reflected in the efficiency of the applied experimental treatment of the groups.18 variables were applied in the study: 6 anthropometric, 10 motor variables and 2 motor variables for assessment of specific motor abilities. Differences in anthropological characteristics, motor skills and speed endurance between the experimental and control groups were analyzed by multivariate analysis of variance, univariate analysis of variance and discriminant analysis, while the actual effects of the experimental treatment were determined on the basis of multivariate analysis of covariance.The working program of the experimental and control groups was carried out in the framework of regular training in sports clubs. The training plan and program was executed three times per week, for both tested groups. The experimental group has implemented the training units by modeled experimental treatment, which is made in accordance with the basic principles of the training process and its periodization, and based on author's extensive experience and adequate literature of the world's best authors of the current field. The control group implemented the training units of the program of the European Athletics Federation "Kid's athletics."The obtained results of anthropometric characteristics indicate that the applied experimental treatment influenced the existence of statistically significant differences in the system of individual anthropometric variables which were applied. Statistically significant differences were determined between groups in the area of motor abilities, after applaying different treatments.As to the specific motor skills, variables for evaluation of girls' speed endurance, covariance analysis also indicated statistically significant differences in the system of applied variables. The experimental group significantly progressed in both variables by which girls' speed endurance had been tested.The main objective of the study was to determine the effect of experimental treatment on girls' speed endurance, and the results of the univariate analysis of covariance and multivariate analysis of covariance confirmed a statistically significant difference in favor of the experimental group.Based on these results, it can be concluded that the proposed experimental treatment in an experimental group contributed to the significant differences in the speed endurance. The final measuring results obtained by comparison of motor abilities between the experimental and control group, confirmed the recent scientific and theoretical knowledge that specific endurance space in speed exists as a special skill on which the appropriate treatment can positively influence and the statistically significant progress can be reached. The significance of this study is in a direct and immediate application of this treatment, where better results are achieved by focusing the treatment on the target distances which are similar by the structure and duration to those that have been tested as a criterion variable.

APA, Harvard, Vancouver, ISO, and other styles

21

Fiala, Martin. "Návrh a optimalizace řídicích algoritmů pro elektrickou brzdu s EC motorem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230816.

Full text

Abstract:

This work is concerned with creating the control algorithm in microcontroller dsPIC30F6015 for electric brake with BLDC motor which will dynamically load testing BLDC motors. The work also includes programming user interface for controlling and settings parameters the control unit.

APA, Harvard, Vancouver, ISO, and other styles

22

Brzoska, Jan [Verfasser], Doris [Gutachter] Fischer, and Björn [Gutachter] Alpermann. "Market forecasting in China: An Artificial Neural Network approach to optimize the accuracy of sales forecasts in the Chinese automotive market / Jan Brzoska ; Gutachter: Doris Fischer, Björn Alpermann." Würzburg : Universität Würzburg, 2020. http://d-nb.info/1209881292/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Zermegh, Tomáš. "Zvyšování tepelných, elektrických a mechanických vlastnosti bezpečnostních brzd." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254463.

Full text

Abstract:

This thesis is dealing with a detailed analysis of electromechanical brake used in emergency situations to stop the electric motor. Environmental influences, bad material proposal or bad design parameters can significantly limit the behaviour of a brake. The thesis presents several approaches to avoid these limitations, to limit the reaction time and achieve better results. The attached programs can be used either for innovation, or for the new brake design based on the entry requirements.

APA, Harvard, Vancouver, ISO, and other styles

24

Vaněk, Roman. "Návrh asistenční brzdy pro mechanický invalidní vozík." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-317004.

Full text

Abstract:

The goal of this diploma thesis was the design of an assistance brake for a mechanical invalid wheelchair. The theoretical part includes the sorting of wheelchairs and available technology of braking systems. In the practical part, there was prepared the design and testing of the assistance brake. In the final chapter, the technical-economic evaluation of the designed solution was discussed and compared with the existing technologies.

APA, Harvard, Vancouver, ISO, and other styles

25

Knöpfel, Sascha [Verfasser], and Michael [Akademischer Betreuer] Brzoska. "The Roles of Non-Nuclear-Weapon States in Advancing Nuclear Disarmament from 2007 to 2013 : Ideal Type Role Concepts as well as Germany’s Role Conception and Role Performance / Sascha Knöpfel ; Betreuer: Michael Brzoska." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2019. http://d-nb.info/1201821231/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Pilčík, Adam. "Pedálová skupina formulového vozidla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229838.

Full text

Abstract:

This thesis draws up a basic overview of the current groups pedal cars. It focuses on creating a computer model of the pedal group with the help of the mathematical model and simulation stress of individual components and proposed relief.

APA, Harvard, Vancouver, ISO, and other styles

27

Bačovský, Marek. "Tepelně-mechanická analýza brzdových kotoučů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231296.

Full text

Abstract:

The aim of this thesis is the analysis of three types commonly used automotive brake discs in terms of their thermal and mechanical resistance on a defined braking maneuver. Another objective is to make an evaluate of the different structural solutions and compare them by each other.

APA, Harvard, Vancouver, ISO, and other styles

28

Štencl, Michal. "Bezpečnostní parkovací brzdy pro servomotory." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-318158.

Full text

Abstract:

This Master thesis is focused on electromagnetic brakes for servomotors. In the first chapter is described principle of operation, later then design and main parameters are explained. The main part of thesis is focused on calculation of dynamic parameters of electromagnetic brakes. Calculations are solved first by analytic method in Matlab–Simulink, then by finite element analysis. Results are compared with measurements on prototype brake.

APA, Harvard, Vancouver, ISO, and other styles

29

Drbohlav, Jan. "Návrh výkonové, řídicí a měřicí elektroniky elektrické brzdy s EC motorem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230825.

Full text

Abstract:

This paper describes the design of control, measurement and power electronics department for dynamic loading of electronically commutated motors with electric brakes. After comparing the advantages and disadvantages of possible conceptions the proposal focuses on electric brake operating in generator mode and the value of load is controlled by the current dissipated in a dummy load.

APA, Harvard, Vancouver, ISO, and other styles

30

Skupová, Dagmar. "Analýza zpomalování tramvají a vyhodnocení jeho účinků na stojící cestující." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-232683.

Full text

Abstract:

The thesis is concerned with establishing the braking retardation and determining of it's influence for standing passengers. The thesis consists of three parts. The first part is theoretical and it is engaged in brake system of tramway. The second, experimentally part talks about practical establishing of braking retardation. And the third part of thesis is gived to discussion about established values of braking retardation. The aim of thesis is to find a value of braking retardation, when standing passengers don't fall down.

APA, Harvard, Vancouver, ISO, and other styles

31

Rušar, Filip. "Univerzální úsťové zařízení na útočnou pušku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318834.

Full text

Abstract:

This diploma thesis deals with the design of a universal muzzle device for the assault rifle. The device is designed to produce Selective Laser Melting. The main objective is the elimination negative effects of gunshot. The paper explores possibilities of using porous structures for this type of equipment. The influence of individual types of porous structures on the flow of gases is monitored. The universal muzzle device itself is optimized using CFD analyzes. The device was made using SLM technology and experimentally verified. His impact on the impact, gun lift, noise and flame elimination was investigated.

APA, Harvard, Vancouver, ISO, and other styles

32

Vojče, Zbyněk. "Bezkontaktní zatěžování a měření vysokootáčkových strojů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-377128.

Full text

Abstract:

Práce se zabývá problematikou měření momentu u velmi vysokootáčkových strojů. Z důvodů vysokých rychlostí jsou tradiční metody měření momentu nepoužitelné, z tohoto důvodu je nutno vyvinout novou bezkontaktní metodu. Pro měření je zvolena metoda zatěžování vířivou brzdou, pro kterou je proveden analytický výpočet jejích vlastností pomocí Maxwellových rovnic a je vytvořen model vířivé brzdy v programu FEMM a Ansys/Maxwell 2D. Na závěr jsou výsledky simulací a výpočtů porovnány s měřením na prototypech brzdy.

APA, Harvard, Vancouver, ISO, and other styles

33

Mladen, Mikić. "Хронични и акутни ефекти изоинерцијалног тренинга на доминантне моторичке способности кошаркаша јуниорског узраста." Phd thesis, Univerzitet u Novom Sadu, Fakultet sporta i fizičkog vaspitanja u Novom Sadu, 2018. https://www.cris.uns.ac.rs/record.jsf?recordId=107372&source=NDLTD&language=en.

Full text

Abstract:

Циљ истраживања је да се утврде ефекти 8 недеља изоинерцијалног тренинга на доминантне моторичке способности кошаркаша. Испитаници, 36 кошаркаша јуниорског узраста (17.58±0.50 година) су подељени у 3 групе: прву експерименталну (ЕСС; n=12) која је вежбала тренинге снаге на изоинерцијалном тренажеру, другу експерименталну (CON; n=12) која је вежбала традиционални изодинамички тренинг снаге са слободним теговима, и контролну групу (KON; n=12) која није вежбала тренинге снаге. Током есперименталног програма ЕСС и CON групе су имале укупно по 12 тренинга снаге са истоветним бројем серија и понављања. На крају четврте недеље код обе експерименталне групе спроведен је тест постактивацијске потенцијације (ПАП) како би се утврдили акутни ефекти различитих метода тренинга у 4 временске тачке: 2, 4, 8 и 15 минута након вежби са оптерећењем. Резултати су показали да постоји статистички значајна разлика као последица примене различитих метода тренинга снаге у трајању од 8 недеља при чему је изоинерцијални тренинг довео до значајно бољих резултата у варијаблама скокова SJ, CMJ, VJ и у скоку са леве ноге CMJLN, затим у тесту спринта 5 m и тестовима агилности Т тест и 505 са окретом око десне ноге. Нису утврђене статистички значајне разлике у тестовима изометријске снаге, скока са десне ноге CMJDN, трчања 20 m и тесту агилности 505 са окретом око леве ноге. У тесту ПАП ефеката није било статистички значајне разлике у резултатима као последице различитих метода вежбања. При томе, СОN група је имала значајно побољшање у тесту скока VJ док је код ЕСС групе значајан ефекат у варијаблама скока VJ и Т тест агилности. Није било значајних ефеката ПАП у тестовима трчања 5 и 20 метара. Добијени резултати указују да изоинерцијални тренинг у трајању од 8 недеља доводи до бољих резултата у развоју експлозивне снаге, брзине и агилности младих кошаркаша у поређењу са традиционалним изодинамичким тренингом, али не и у ПАП ефектима. У складу с тим, тренери и кондициони тренери би требали да у раду са младим спортистима користе и ову методу тренинга снаге.
Cilj istraživanja je da se utvrde efekti 8 nedelja izoinercijalnog treninga na dominantne motoričke sposobnosti košarkaša. Ispitanici, 36 košarkaša juniorskog uzrasta (17.58±0.50 godina) su podeljeni u 3 grupe: prvu eksperimentalnu (ESS; n=12) koja je vežbala treninge snage na izoinercijalnom trenažeru, drugu eksperimentalnu (CON; n=12) koja je vežbala tradicionalni izodinamički trening snage sa slobodnim tegovima, i kontrolnu grupu (KON; n=12) koja nije vežbala treninge snage. Tokom esperimentalnog programa ESS i CON grupe su imale ukupno po 12 treninga snage sa istovetnim brojem serija i ponavljanja. Na kraju četvrte nedelje kod obe eksperimentalne grupe sproveden je test postaktivacijske potencijacije (PAP) kako bi se utvrdili akutni efekti različitih metoda treninga u 4 vremenske tačke: 2, 4, 8 i 15 minuta nakon vežbi sa opterećenjem. Rezultati su pokazali da postoji statistički značajna razlika kao posledica primene različitih metoda treninga snage u trajanju od 8 nedelja pri čemu je izoinercijalni trening doveo do značajno boljih rezultata u varijablama skokova SJ, CMJ, VJ i u skoku sa leve noge CMJLN, zatim u testu sprinta 5 m i testovima agilnosti T test i 505 sa okretom oko desne noge. Nisu utvrđene statistički značajne razlike u testovima izometrijske snage, skoka sa desne noge CMJDN, trčanja 20 m i testu agilnosti 505 sa okretom oko leve noge. U testu PAP efekata nije bilo statistički značajne razlike u rezultatima kao posledice različitih metoda vežbanja. Pri tome, SON grupa je imala značajno poboljšanje u testu skoka VJ dok je kod ESS grupe značajan efekat u varijablama skoka VJ i T test agilnosti. Nije bilo značajnih efekata PAP u testovima trčanja 5 i 20 metara. Dobijeni rezultati ukazuju da izoinercijalni trening u trajanju od 8 nedelja dovodi do boljih rezultata u razvoju eksplozivne snage, brzine i agilnosti mladih košarkaša u poređenju sa tradicionalnim izodinamičkim treningom, ali ne i u PAP efektima. U skladu s tim, treneri i kondicioni treneri bi trebali da u radu sa mladim sportistima koriste i ovu metodu treninga snage.
The aim of this research is to determine the effects of an 8-week isoinertial training on dominant motor abilities of basketball players. Examinees, i.e. 36 junior basketball players, (17.58±0.50 years) are divided into 3 groups: the first experimental group (ECC; n=12) which took strength training exercises on isoinertial training device, the second experimental (CON; n=12) which took traditional isodynamic strength training with free weights, and a control group (CON; n=12) which did not take any strength training exercises. During the experimental program, the ECC and CON groups had 12 strength training sessions in total including the same number of series and repetitions. At the end of the fourth week, both experimental groups were tested for post-activational potentiation (PAP) in order to determine acute effects of different training methods in 4 time points: 2, 4, 8 and 15 minutes after loading exercises. The findings indicate that there is a statistically significant difference as a result of the application of different strength training methods lasting for 8 weeks, since the isoinertial training brought about significantly better results in the variables of jumps SJ, CMJ, VJ and jump off the left foot CMJLN, as well as in the 5m sprint test and agility tests (T-test and 505 test with turn on the right leg). No statistically significat differences were found in tests of: isometric strength, jump off the right foot CMJDN, 20m run and 505 agility test with the turn on the left leg. Also, there were no statistically significant differences as a result of different exercise methods in the PAP test. In that process, CON group had significant improvement in VJ jump test, whereas in ECC group a significant effect was found in the variables of VJ and agility T-test. The 5m and 20m run tests showed no significant PAP effects either. In comparison with the traditional isodynamic training, the findings indicate that isoinertial training lasting for 8 weeks gives rise to better results in the development of explosive strength, speed and agility of young basketball players. Accordingly, coaches and trainers should use this method of strength training in work with young athletes.

APA, Harvard, Vancouver, ISO, and other styles

34

Süttő, Daniel. "Měření zpomalení nákladních automobilů nad 12 tun při brzdění motorem." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254242.

Full text

Abstract:

This thesis is dealing with measuring the deceleration of lorries when they are braked by the engine. The weight of the vehicles given is bigger than 12 tons. The thesis can be divided into theoretical and practical part. In the theoretical part there are special presumptions to manage the given problem successfully. The stress is on the construction of lorries and on driving resistances which influence the process of deceleration a lot. The thesis also analyses the technical solution of each possibilities of braking and also the function of the gearbox. In the practical part the method of measuring is described. The measurement devices are also given through which the measurements were realized. The main part of this work is made by measured values of each lorries and the interpretation of measured values itself. The final evaluation of measured data are mentioned at the end of the thesis.

APA, Harvard, Vancouver, ISO, and other styles

35

Toman, Svatopluk. "Výroba pístu diskové brzdy objemovým tvářením." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228278.

Full text

Abstract:

The project of Master’s thesis elaborated within engineering studies of branch 23-03-T002 proposes a technology of production of disk brake piston made of low-carbon steel EN C10E. Supposed production amount is 300 000 pieces per year. With knowledge of literary study on the theme of cold steel bulk forming, three variants of production technique were proposed. The chosen one, for which the technological and energy computations were accomplished, consists of two basic forming operations. For manufacture realization was selected three-stage automatic forming machine TPD 630 (manufacturer Šmeral Brno) with nominal forming output of 6 300 kN. As a material of extruding punch, tool-steel EN X100CrMoV5-1was chosen. For extruding dies was selected high speed steel HS 6-5-2 and its shrink ring is made of high quality steel 60WCrV8. Optimalization of tool properties was performed with specialized PC software.

APA, Harvard, Vancouver, ISO, and other styles

36

Kolbábek, Lukáš. "Lis LKDS 800." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230292.

Full text

Abstract:

The present Master´s thesis deals with the concept of press drive of Blanking press LKDS 800 used for blanking in automatic blanking line. The first part of the thesis is dedicated to the individual arrangements of press drives and servo press drives and to the description of main components. The second part of this thesis deals with the structural design of the drive. Based on the computation of the crank mechanism, several design solutions were suggested. From these solutions, the option with the lowest drive height is selected. This option, offers the computation of the main drive, flywheel, spur gearing and clutch/brake combination. This computation is followed by computations of individual construction nodes, which include a design and dimensioning of the individual joggles, shafts and bearings. The drawing of the press and clutch shaft assemblies with a list of items are also included.

APA, Harvard, Vancouver, ISO, and other styles

37

Dorňák, Michal. "Navíjecí stroj." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228653.

Full text

Abstract:

The aim of this diploma thesis is the proposal of solution of three-axial winding machine for winding technology of rotary profile. Winding materials are continual springs of carbon, aramid or glass fibre impregnated by resin. The main construction change of the machine compared to commercial available solutions is the use of linear motor as a frame element instead of roller screws or toothed chain. Linear motors have higher dynamics of the movement and they can reach higher speed compared to other solutions, which guarantee increase of the machine productivity. The main importance is put not only on the functionality but also on the low price of this solution. The 3D model of the mechanism is created in the program Inventor 2009.

APA, Harvard, Vancouver, ISO, and other styles

38

Regner, Dominik. "Studie příčného rychlostního pole v blízkosti rotujícího kola s uvažováním vlivu nucené konvekce kotoučové brzdy." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-399576.

Full text

Abstract:

The master thesis deals with the influence of a local change of temperature due to advection from disc brake to axial velocity field close to the rotating wheel of a car. The second goal is to set parameters applicable to various wheel discs and study of the influence of these parameters to aerodynamical properties of car and thermodynamical properties of the disc brake. The thesis is numerically executed in StarCCM+. The first part focuses on theoretical background about the numerical solution and current status of research. There are described disc parameters, geometry input and solver settings in the second part. The final part deals with a comparison of velocity fields for isothermal and thermodynamical model and evaluates the influence of parameters to velocity field, aerodynamical drag and thermodynamical performance of the brake.

APA, Harvard, Vancouver, ISO, and other styles

39

Haman, Tomáš. "Lis LKJP 630." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230363.

Full text

Abstract:

Master’s thesis deals with the design of the drive of the press LKJP 630, the configuration is a fixed range by the construction of LKJP. The thesis was ordered by partnership with company ŽĎAS, which is introduced. The first part is devoted to analysis of solved problems, it primarily contains the overview on forming machines, used drives and a description of their main parts. The second part deals with the drive itself, there is accomplished the design and performed the strength analysis of the major parts of the drive. Drawing documentation and bill of materials are included.

APA, Harvard, Vancouver, ISO, and other styles

40

Vladimir, Tomović. "Uticaj brzine hlađenja polutki, vremena otkoštavanja post mortem i postupka salamurenja na kvalitet i bezbednost kuvane šunke." Phd thesis, Univerzitet u Novom Sadu, Tehnološki fakultet Novi Sad, 2009. https://www.cris.uns.ac.rs/record.jsf?recordId=71279&source=NDLTD&language=en.

Full text

Abstract:

Cilj ovog rada je bio de se utvrdi uticaj brzog vazdušnog hlađenja polutki (na –31°C do cca 4 sata, a zatim na 2 do 4°C do 8, odnosno do 24 sata post mortem), vremena otkoštavanja post mortem (8 i 24 sata post mortem), nakon brzog hlađenja, i postupka salamurenja (bez ili sa vakuumom) proizvedenog svinjskog mesa (M. semimembranosus) na kvalitet i bezbednost kuvane šunke (konzervi od mesa u komadima), odnosno postavljen je zadatak razvoja novog proizvodnog procesa kuvane šunke koji će počivati na značajnoj racionalizaciji tehnološkog postupka, a čime bi se ostvarila i određena ekonomska dobit, uz postizanje vrhunskog kvaliteta proizvoda.Da bi ovako postavljeni zadatak dao očekivane rezultate najpre je ispitan uticaj brzog hlađenja polutki i vremena otkoštavanja post mortem, nakon brzog hlađenja, na tehnološki, nutritivni i senzorni kvalitet i bezbednost svinjskog mesa (M. semimembranosus), namenjenog proizvodnji ovog proizvoda. Analizom dobijenih rezultata zaključeno je da se brzim hlađenjem može obezbediti otkoštavanje polutki 8 sati post mortem, sa internom temperaturom manjom od 7°C, uz značajno smanjenje troškova rada, kala hlađenja i udela mesa (M. semimembranosus) blede boje, odnosno zaključeno je da su brzo hlađeni mišići već do 8 sati post mortem prevedeni u stanje podesno za salamurenje, čime je dobijena sirovina potrebnih svojstava za izradu kuvane šunke.Od ovako proizvedenog mesa (M. semimembranosus), nezavisno od postupka salamurenja (sa ili bez vakuuma), može se proizvesti kuvana šunka vrhunskog kvaliteta, što potvrđuju rezultati ispitivanja kvaliteta kuvanih šunki proizvedenih od ove sirovine, pri čemu treba istaći da su utvrđene izvesne razlike kod pojedinih faktora kvaliteta kuvanih šunki prvenstveno rezultat faktora proizvodnje (na primer, operacije salamurenja), odnosno još uvek nestandardnog postupka proizvodnje ovih proizvoda (na primer, neujednačeno ubrizgavanje salamure). Dodatnim izmenama u tehnologiji salamurenja proizvedena je kvalitetna konzerva od mesa u komadima od ostataka mesa buta, uključujući i izdvojeno meso slabijeg kvaliteta (M. semimembranosus), i na taj način je samo još dodatno potvrđeno da je moguće značajno racionalizovati proizvodnju kuvane šunke uz valorizaciju celokupne muskulature buta.
The aim of the work was to determine the effect of rapid chilling of carcasses (at -31°C up to cca.4 hours, and at 2 to 4°C til 8 i.e. 24 hours post mortem), time of deboning post mortem (8 and 24hours post mortem), after rapid chilling, and way of curing (with and without vacuum) of processedpork (M. semimembranosus) on quality and safety of cooked ham i.e. a task was set to develop a newprocess of cooked ham production based on significant rationalization of the technological procedure,enabling a certain economic profit, and achieving first class product quality.The effect of rapid chilling of carcasses and time of deboning post mortem, after rapid chilling, ontechnological, nutritive and sensory quality and safety of pork (M. semimembranosus) intended for theproduction of cooked ham was investigated. The analysis of obtained results showed that deboning ofcarcasses is possible up to 8 hours post mortem due to rapid chilling, achieving internal temperatureslower than 7°C, with significantly lower working co sts, weight loss and share of pale meat (M.semimembranosus), i.e. the conclusion is that rapid chilled muscles 8 hours post mortem were in stateconvenient for curing, obtaining the raw material of required characteristics for cooked hamproduction.First class quality cooked ham can be produced from pork (M. semimembranosus) obtained inthis way, irrespective of curing process (with or without vacuum), as supported by the results of qualityinvestigation of the obtained final product. Some differences found between certain quality factors ofcooked ham are the result of processing factors (curing processes, for example), i.e. of still nonstandardproduction way of this product (for example, uneven injecting of brine). Certain changes ofcuring technology enabled the production of quality cooked ham from rest ham meat and theseparated lower quality meat (M. semimembranosus). These results additionally confirm the possibilityof significant rationalization of cooked ham production i.e. possible valorization of the whole amount ofham meat.

APA, Harvard, Vancouver, ISO, and other styles

41

Adam, Petr. "Pomocná jeřábová kočka licího jeřábu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241179.

Full text

Abstract:

This master thesis deals with issue design of crab trolley. Concretely is acted about auxiliary crab trolley with required capacity 65 000 kg. This crab is on overhead crane, which is situated at hall of foundry. In particular chapters is processed design of lifting mechanism and travelling mechanism, which is amended to strength control of frame. This whole leads to output solutions, which is drawing documentation.

APA, Harvard, Vancouver, ISO, and other styles

42

Tkadlec, Dušan. "Návrh dvouosé automatické vidlicové frézovací hlavy osazené elekrovřetem s aplikací pohonů Harmonic-Drive." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229238.

Full text

Abstract:

This master´s work deal with design two axis cutter head with possible variants drive of axis. The part of this work is also technical– economics valuation of single variants, calculation torque and force from motor head and design taking head in two axis. Cutter head should be applicated to boring and cutting headstock given to type with posibility of adaptive exchenges spindle.

APA, Harvard, Vancouver, ISO, and other styles

43

Žid, Miroslav. "Pojezdový mechanismus mostového jeřábu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-377472.

Full text

Abstract:

The aim of this master thesis is to design replacing the central drive of the overhead crane with dislocated drives. It´s a tong crane with the lifting capacity of 63 tons, located inside the hall. In the thesis is processed functional calculation of two types of drives, the associated types of brakes and the coupling element. Next there is a strength control of a new mechanism seat and a selected components. This whole leads to the output, which is the drawing documentation.

APA, Harvard, Vancouver, ISO, and other styles

44

Podhora, David. "Konstrukční návrh pohonu přední hnané nápravy traktoru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378416.

Full text

Abstract:

This master’s thesis is deal with the design of the tractor’s front axle drive to enlarge its braking efficiency of the standing tractor fixed by the parking brake. In the first two chapters, the basic information related to the above stated issue is being summarized. Next, procedure of creating the design including the fundamental calculation proposal is being described. In the last chapter, the strain-stress analysis of the selected partial sections of the design is being presented. The final design is supported with the drawing documentation that is being part of this master’s thesis, too.

APA, Harvard, Vancouver, ISO, and other styles

45

Hrabovský, Jozef. "Optimalizační analýza brzdového kotouče." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-227872.

Full text

Abstract:

Subject of this diploma thesis is break wheel optimalization analysis. Break wheels are used in mountain bike downhill races in extreme conditions. It is the first product of this type of an emergent company that was made by the use of intuitive approach. The reason for optimalization is improper behavior of existing solution that occurred during testing. This optimalization consists of finding and analyzing existing characteristics, deciding which factors influence this improper behavior, suggesting new solution and verification of this solution. Break wheel characteristics were detected in an experiment. For realization and evaluation of this experiment, a method named Design of experiments, was selected. This method is used for elaboration of results coming from the Regression analysis. It is possible to effectively achieve the result data by using this procedure. The experiment was oriented to gain data of temperature behavior of break wheel during real load. Mathematical model was adapted on the basis of this data and finally, the calculation was made by the use of Final element method by ANSYS WORKBENCH. Calculations were also coordinated through Design of calculation, and were oriented on temperature deformation and stress. Solution achieved by the Final element method, was evaluated by the Regression analysis and served as a proposition for a new break wheel construction.

APA, Harvard, Vancouver, ISO, and other styles

46

Aleksandar, Rajić. "Primena aditivnih proizvodnih tehnologija u postupku preciznog livenja ortopedskih implantata." Phd thesis, Univerzitet u Novom Sadu, Tehnički fakultet Mihajlo Pupin u Zrenjaninu, 2015. http://www.cris.uns.ac.rs/record.jsf?recordId=95425&source=NDLTD&language=en.

Full text

Abstract:

Doktorska disertacija razmatra primenu savremenih aditivnih proizvodnih tehnologija u postupku preciznog livenja ortopedskih implantata i njihov uticaj na skraćenje vremena i smanjenje troškova izrade topljivih modela. Konvencionalni postupak preciznog livenja ortopedskih implantata zahteva značajno vreme i troškove za izradu kalupa za topljive modele. U disertaciji je razvijena metoda za „brzo precizno livenje“ kojom se eliminiše potreba za izradom kalupa za topljive modele ortopedskih implantata. Potrebno je utvrditi da li se pomoću predložene metode „brzog preciznog livenja“ koja predstavlja integraciju aditivnih proizvodnih tehnologija i reverznog inženjerstva sa konvencionalnim preciznim livenjem, može dati značajniji doprinos daljem razvoju u oblasti izrade prilagođenih ortopedskih implantata.
The doctoral thesis discusses the application of modern additive manufacturing technologies in investment casting of orthopaedic implants and their impact on time and cost savings in meltable wax models development. The conventional procedure of investment casting of orthopaedic implants demands considerable time and costs when developing moulds for meltable wax models. The thesis shows a method of “rapid investment casting” developed to avoid the making the moulds for meltable wax models of orthopaedic implants. It is necessary to establish whether the proposed method of “rapid investment casting”, which integrates additive manufacturing technologies and reverse engineering with conventional investment casting, may give a significant contribution to further development of manufacturing of customized orthopaedic implants

APA, Harvard, Vancouver, ISO, and other styles

47

Brza, Lukáš. "Design rýpadla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228570.

Full text

Abstract:

The design of the excavator follows requirements of machines for demolition work. The excavator is equipped with an innovative type of under carriage, which not only increases mobility over the demolition sites but also the visibility from the driver’s cabin. The components of the excavator, that improve the demolition work, are special types of tracks, suspensions and articulated steering. Tracks can change their shape to increase the stability and also to adapt to the diff erent types of ground. The suspensions with tracks are able to adapt to the terrain thereby they lighten the asperity. Suspension can also tilt or even raise the excavator and thereby increase the angle of visibility from the cabin. This function is necessary mainly when taking down higher constructions. Articulated steering is a new function that has never been used for excavators. This steering was chosen due to fl exible movement over demolition sites. The main aim of the project is to create a new design of the excavator, but more importantly to distinguish the excavator from the excavators already on the market, with regards to its esthetics and under carriage innovation.

APA, Harvard, Vancouver, ISO, and other styles

48

Bártová, Jana. "Návrh zkapalňovacího cyklu Helia." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417538.

Full text

Abstract:

The present master thesis deals with the technologies for gas liquefaction focused on helium. The first part of the thesis contains a description of the history of liquefaction, production and usage of liquid helium, as well as the principles of liquefaction and cooling cycles. In the following part of the thesis is a detailed model of the liquefaction cycle for which radial-axial turbine wheels were designed. The last part of the thesis contains financial analysis of the suitability of using the expander with eddy current brake and the expander with an electric generator.

APA, Harvard, Vancouver, ISO, and other styles

49

Hertl, David. "Vychystávací jednotka skladovacího systému Multi tower." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230086.

Full text

Abstract:

This Diploma thesis deals with design of the drive and frame of the face and side picking unit of the Multitower storage system, and deals with their strength analysis. The first part of the thesis is the research part and deals with the picking unit´s conception, power options, drive solutions, carriage and safety elements. The thesis also deals with the solution of the wheel´s passive resistance, drive and brakes of both picking units. There are designed appropriate solutions on the basis of the results. The final part of the thesis contains the description of the picking unit structure and the strength analysis.

APA, Harvard, Vancouver, ISO, and other styles

50

Predrag, Kojić. "Hidrodinamika i prenos mase u airlift reaktoru sa membranom." Phd thesis, Univerzitet u Novom Sadu, Tehnološki fakultet Novi Sad, 2016. http://www.cris.uns.ac.rs/record.jsf?recordId=100280&source=NDLTD&language=en.

Full text

Abstract:

U okviru doktorske disertacije izvedena su eksperimentalna istraživanja osnovnih hidrodinamičkih i maseno-prenosnih karakteristika airlift reaktora sa spoljnom recirkulacijom sa ugrađenom višekanalnom cevnom membranom u silaznu cev (ALSRM). ALSRM je radio na dva načina rada: bez mehurova u silaznoj cevi (način rada A) i sa mehurovima u silaznoj cevi (način rada B) u zavisnosti od nivoa tečnosti u gasnom separatoru. Ispitivani su uticaji prividne brzine gasa, površinskih osobina tečne faze, tipa distributora gasa i prisustva mehurova gasa u silaznoj cevi na sadržaj gasa, brzinu tečnosti u silaznoj cevi i zapreminski koeficijent prenosa mase u tečnoj fazi u ALSRM. Rezultati su poređeni sa vrednostima dobijenim u istom reaktoru ali bez membrane (ALSR). Sadržaj gasa u uzlaznoj i silaznoj cevi određivan je pomoću piezometarskih cevi merenjem hidrostatičkog pritiska na dnu i vrhu uzlazne i silazne cevi. Brzina tečnosti merena je pomoću konduktometrijskih elektroda dok je zapreminski koeficijent prenosa mase dobijen primenom dinamičke metode merenjem promene koncentracije kiseonika u vremenu optičkom elektrodom. Eksperimentalni rezultati pokazuju da sadržaj gasa, brzina tečnosti i zapreminski koeficijent prenosa mase zavise od prividne brzine gasa, vrste alkohola i tipa distributora gasa kod oba reaktora. Višekanalna cevna membrana u silaznoj cevi uzrokovala je povećanje ukupnog koeficijenta trenja za 90% i time dovela do smanjenja brzine tečnosti u silaznoj cevi do 50%. Smanjena brzina tečnosti u silaznoj cevi povećala je sadržaj gasa do 16%. Predložene neuronske mreže i empirijske korelacije odlično predviđaju vrednosti za sadržaj gasa, brzinu tečnosti i zapreminski koeficijent prenosa mase.
An objective of this study was to investigate the hydrodynamics and the gas-liquid mass transfer coefficient of an external-loop airlift membrane reactor (ELAMR). The ELAMR was operated in two modes: without (mode A), and with bubbles in the downcomer (mode B), depending on the liquid level in the gas separator. The influence of superficial gas velocity, gas distributor’s geometry and various diluted alcohol solutions on hydrodynamics and gas-liquid mass transfer coefficient of the ELAMR was studied. Results are commented with respect to the external loop airlift reactor of the same geometry but without membrane in the downcomer (ELAR). The gas holdup values in the riser and the downcomer were obtained by measuring the pressures at the bottom and the top of the riser and downcomer using piezometric tubes. The liquid velocity in the downcomer was determined by the tracer response method by two conductivity probes in the downcomer. The volumetric mass transfer coefficient was obtained by using the dynamic oxygenation method by dissolved oxygen probe. According to experimental results gas holdup, liquid velocity and gas-liquid mass transfer coefficient depend on superficial gas velocity, type of alcohol solution and gas distributor for both reactors. Due to the presence of the multichannel membrane in the downcomer, the overall hydrodynamic resistance increased up to 90%, the liquid velocity in the downcomer decreased up to 50%, while the gas holdup in the riser of the ELAMR increased maximally by 16%. The values of the gas holdup, the liquid velocity and the gas-liquid mass transfer coefficient predicted by the application of empirical power law correlations and feed forward back propagation neural network (ANN) are in very good agreement with experimental values.

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!