Relevant bibliographies by topics / Brooches Design and construction

Academic literature on the topic 'Brooches Design and construction'

Author: Grafiati
Published: 10 December 2022
Last updated: 28 January 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Brooches Design and construction.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Brooches Design and construction"

1

Pinder, Michael. "Anglo-Saxon Garnet Cloisonné Composite Disc Brooches: Some Aspects of their Construction." Journal of the British Archaeological Association 148, no. 1 (January 1995): 6–28. http://dx.doi.org/10.1179/jba.1995.148.1.6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Prokopenko, Yury, and Svetlana Kravtsova. "Fibula-Brooch with Pendants from the Barrow Studied in the Northern Surrounding Areas of Cherkessk." Vestnik Volgogradskogo gosudarstvennogo universiteta. Serija 4. Istorija. Regionovedenie. Mezhdunarodnye otnoshenija, no. 5 (October 2019): 19–33. http://dx.doi.org/10.15688/jvolsu4.2019.5.2.

Full text
Abstract:
Introduction. The article is devoted to characterizing the decorative features of the fibulabrooch discovered during the study of the mound in the northern surrounding areas of Cherkessk (territory of the Republic of Karachay-Cherkessia) and stored in the collection of the Stavropol State Museum. The aim of the publication is to introduce the poorly known scientific material into scientific use. A full set of illustrations and accurate measurements will further avoid confusion with the description of the specific artifact (in existing publications there are no drawings; conclusions are based only on photos). Explanations relate to the history of the brooch and details of its decoration. Methods. The comparative typological method is used as a working one. It is based on the classification by material, processing method, form, ornamentation, as well as identifying and studying types of brooches with pendants. The comparative analysis of the decor of the brooch from the Stavropol museum and similar brooches with pendants found in the western part of the North Caucasus shows the variety of polychrome decoration production technologies in the region in the 3rd – 1st centuries BC: preserving the traditions of Bosporan jewelry art; distribution of the elements of Colchian toreutics. Analysis. The paper considers design features of brooches from the Stavropol museum and monuments of the Western Ciscaucasia: details of zoomorphic figurines; characteristics of caste design; wire inlay; form and features of enamel inserts; character of pendant weaving and features of the design of suspended discs. Results. In the production of hollow zoomorphic images of the 3rd – 1st century BC there were two lines of development: 1) simplified modeling of figurines modeled on the pattern of Colchian products of the 5th – 4th centuries BC (Psenafa and others); 2) continuation of the tradition of producing jewelry with enamel (brooch from the mound in the land of Rodina state farm). In the first case, the simplicity and negligence of execution evidence established local production of imitations of Colchian images. In the second case, elegance of images and refinement of execution emphasize the creation of brooches of Karachay-Cherkessia in one of the centers of Bosporus toreutics which was under the influence of Colchian jewelry.
APA, Harvard, Vancouver, ISO, and other styles
3

Herr, Christiane M. "Design Is Construction, Construction Is Design." She Ji: The Journal of Design, Economics, and Innovation 5, no. 4 (2019): 367–69. http://dx.doi.org/10.1016/j.sheji.2019.11.007.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

YAMAMOTO, Hikaru, Takayuki SHIMODAIRA, and Takeshi TAKAHASHI. "Construction Equipment, Crane (Design)." JOURNAL OF THE JAPAN WELDING SOCIETY 81, no. 2 (2012): 112–17. http://dx.doi.org/10.2207/jjws.81.112.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

CRIGHTON, G. S., A. R. BIGGART, and E. H. NORIE. "TUNNEL DESIGN AND CONSTRUCTION." Proceedings of the Institution of Civil Engineers - Civil Engineering 92, no. 5 (December 1992): 18–42. http://dx.doi.org/10.1680/icien.1992.21680.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Elaine, McColl. "Questionnaire design and construction." Nurse Researcher 1, no. 2 (January 1994): 16–25. http://dx.doi.org/10.7748/nr.1.2.16.s3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mccoll, Elaine. "Questionnaire design and construction." Nurse Researcher 1, no. 2 (January 1994): 16–23. http://dx.doi.org/10.7748/nr1994.01.1.2.16.c6288.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Waltham, Chris. "Harp design and construction." Journal of the Acoustical Society of America 117, no. 4 (April 2005): 2590. http://dx.doi.org/10.1121/1.4777279.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Campbell, Brian, and Mandy Gries. "Facility Design & Construction." Oncology Issues 10, no. 6 (November 1995): 23–25. http://dx.doi.org/10.1080/10463356.1995.11904577.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Cennamo, Katherine S. "Design as Knowledge Construction." Computers in the Schools 20, no. 4 (December 2003): 13–35. http://dx.doi.org/10.1300/j025v20n04_03.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Brooches Design and construction"

1

Isbell, Anna Luella. "Broaching the subject: the geometry of Anglo-Saxon composite brooches." Thesis, University of Iowa, 2015. https://ir.uiowa.edu/etd/1641.

Full text
Abstract:
The various surviving disc and composite brooches provide proof of the skill and craftsmanship of Anglo-Saxon metalsmiths. Surprisingly, no one has conducted a full geometrical analysis of these brooches to discover the design process preceding the casting and decoration. This thesis endeavors to rectify this through a geometrical investigation of the sophisticated geometrical planning principles used by Anglo-Saxon craftsmen in the creation of these elaborate brooches. Through the use of simple geometrical constructions, smiths were able to create works of great beauty and sophistication. Closer inspection reveals that Anglo-Saxon smiths produced all the composite disc brooches in this study using similar processes of planning. In order to plan out the compositions of each brooch, master smiths would only need a compass, a straightedge, and some material on which to write. Each brooch reveals the same kind of coherent geometry, sharing traits and patterns; with proportions tend to be governed by a series of modular association. Although the master smiths or designers of the composite brooches used simple tools to create the composition, the figures in this thesis were created using the Vectorworks CAD program. This significantly expedited the analytical process and allowed for exact measurements. Despite using the computer program to replicate the planning process, all the figures can be recreated with just a compass and straightedge. While a complete geometric study of all the composite disc brooches needs to be done, this study examines five of the best preserved and well-crafted of that type, ranging from some of the simplest to the most elaborate, as an introduction to the subject.
APA, Harvard, Vancouver, ISO, and other styles
2

Винничук, М. С., and Юлія Копієвська. "Особливості дизайн-проектування сучасних аксесуарів handmade." Thesis, Київський національний університет технологій та дизайну, 2018. https://er.knutd.edu.ua/handle/123456789/10668.

Full text
Abstract:
В роботі розглянуто сучасні тенденції в аксесуарах, що застосовують в своїх колекціях сучасні дизайнери на світових подіумах. Визначено особливості дизайн-проектування сучасних аксесуарів hаnd mаde.
In the article the modern tendencies of accessories in the collection of designers on world podiums are considered. The features of design-design of modern accessories hаnd made are determined.
APA, Harvard, Vancouver, ISO, and other styles
3

Westerhoff, Kevin M. (Kevin Matthew) 1978. "Construction based design." Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/84827.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Xie, Xiaoling. "Communications in construction design." Thesis, Loughborough University, 2002. https://dspace.lboro.ac.uk/2134/7571.

Full text
Abstract:
Construction design has become an increasingly complex synthesis activity for which effective solutions depend upon co-operative participation by a number of people. Thus communication, including the integration of specialised knowledge and negotiation of differences between team members, is a vital process for collaborative design. A questionnaire survey was initially conducted to investigate communication issues and problems, which had been highlighted from a review of the literature, in current construction design. The results confirmed that communication among the different construction team members is often difficult although of paramount important to design outcomes. Based on these results, case studies have been carried out to gain further insights into communication issues and problems, and explore why and how they are caused. Through the application of multiple approaches, a model has been developed, which suggests strategies that may help participants communicate more effectively and ultimately improve the quality of construction design outcomes.
APA, Harvard, Vancouver, ISO, and other styles
5

Soto, Leticia S. M. Massachusetts Institute of Technology. "Construction design as a process for flow : applying lean principles to construction design." Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/42995.

Full text
Abstract:
Thesis (S.M.)--Massachusetts Institute of Technology, System Design and Management Program, 2007.
Includes bibliographical references (p. 108-111).
Delays and cost overruns are the rule rather than the exception in the construction industry. Design changes due to lack of constructability late in the construction phase generating costly ripple effect which create delay and disruption throughout the entire organization, are the largest contributors to the stated rule. In the building construction industry, of increased competitiveness, demand from many companies continued effort to develop new methods and tools, in which the design for quality, cost, construability and reliability play an important role. The planning and management of building design has historically focused upon traditional methods of planning such as Critical Path Method (CPM). Little effort is made to understand the complexities of the design process; instead design managers focus on allocating work packages where the planned output is a set of deliverables. This current design method forces design teams to manage their work on a discipline basis, each working on achieving their deliverable as dictated by the design program with little regard of the relationship with other disciplines and organizations. In addition, because Architect and Engineering firms view design and construction as two separate independent phases of work in project it makes it difficult to verify constructability in a design and create flow in the overall process. The goal of this study is to look at how aligning interests, objectives and practices based on lean fundamentals, during the earliest stages of a project, as a method of improving construction performance.
by Leticia Soto.
S.M.
APA, Harvard, Vancouver, ISO, and other styles
6

Sebille, Michel. "Design :construction, automorphisms and colourings." Doctoral thesis, Universite Libre de Bruxelles, 2002. http://hdl.handle.net/2013/ULB-DIPOT:oai:dipot.ulb.ac.be:2013/211428.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Chew, En Phin. "Superconducting Transformer Design and Construction." Thesis, University of Canterbury. Electrical and Computer Engineering, 2010. http://hdl.handle.net/10092/4977.

Full text
Abstract:
This thesis first outlines the testing undertaken on a partial core superconducting transformer under open circuit, short circuit, full load and endurance test conditions. During the endurance test, a failure occurred after 1 minute and 35 seconds. During the failure, voltage dipping and rapid liquid nitrogen boil off was observed. This prompted a failure investigation which concluded that the lack of cooling in the windings was the most probable cause to the failure. Full core transformer and superconductor theories are then introduced. A copper winding transformer model, based on a Steinmetz equivalent circuit and a reverse design method, is described. A superconductor loss model which outlines the different types of losses experienced under AC conditions is used to determine the resistance of the windings in the Steinmetz equivalent circuit. This resistance changes with the magnitude of current and the strength of the magnetic field that is present in the gaps between each layer of the windings. An alternative leakage flux model is then presented, where the flux is modelled based on the combination of the reluctance of the core and the air surrounding the windings. Based on these theories, an iterative algorithm to calculate the resistance of the superconductor is developed. A new design of a 15kVA single phase full core superconducting transformer, operating in liquid nitrogen, is presented. The issues with building the superconducting transformer are outlined. First, a copper mockup of the superconducting transformer was designed where the mockup would have the same tape and winding dimensions as the superconducting transformer, which means the same core can be used for two different sets of windings. This led to designing a core that could be easily taken apart as well as reassembled. Construction of the core, the copper windings and the superconductor windings ensued. The process of cutting the core laminations, insulating the copper and superconductor tapes, and making the steel fasteners and terminations are described. The copper mockup and superconducting transformers was then tested under open circuit, short circuit, different load and endurance conditions at both liquid nitrogen and room temperatures. These test results were then compared with the those from two models. The comparison showed a significant inaccuracy in the reactances in the models. This introduced a correction factor into the superconductor model which ii made it more accurate. However, further work is required to explain and quantify the correction factors for the copper transformer model under different load conditions.
APA, Harvard, Vancouver, ISO, and other styles
8

Leung, Chi-ming. "Design consultancy vs design and build consultancy : present trends in the construction industry /." Hong Kong : University of Hong Kong, 1995. http://sunzi.lib.hku.hk/hkuto/record.jsp?B14038869.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ferguson, A. J. L. "Dilution refrigerator : Design, construction and performance." Thesis, University of Ulster, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.378638.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Batzer, Rachel E. (Rachel Elizabeth). "Design and construction of a dynamometer." Thesis, Massachusetts Institute of Technology, 2011. http://hdl.handle.net/1721.1/68827.

Full text
Abstract:
Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2011.
"June 2011." Cataloged from PDF version of thesis.
Includes bibliographical references (p. 20).
Access to a dynamometer is a useful tool for any electrical system where the motors must be selected from various suppliers and fully characterized. Motor suppliers usually provide a torque, speed, efficiency curve, but it frequently lacks complete motor characterization and includes motor controller losses in the total system loss. The dynamometer presented in this thesis is primarily designed for testing of high efficiency motors and motor controllers in the power and speed range requires for competition in the World Solar Challenge, a transcontinental race for solar electric vehicles. The testing specifications of a solar electric vehicles are uncommon among motor testing needs because it requires high torque, low power, high efficiency, and the only a small operating range. This thesis covers the design and construction of the dynamometer.
by Rachel E. Batzer.
S.B.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Brooches Design and construction"

1

Galli, Maurice P. Designing jewelry: Brooches, bracelets, necklaces & accessories. Atglen, PA: Schiffer Pub., 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Remiasz, Mile Victoria, ed. Hats, design & construction. 2nd ed. Evergreen Park, Ill: Hat Tree Studio, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Costume construction. Englewood Cliffs, NJ: Prentice-Hall, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Furniture by design: Design, construction & technique. New York: Lyons & Burford, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

European cabinetry: Design & construction. New York: Sterling, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ambrose, James E. Building construction and design. New York: Van Nostrand Reinhold, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Dwight, John. Aluminium design and construction. London: E & FN Spon, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ambrose, James. Building construction and design. New York: Van Nostrand Reinhold, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

S, Lunde Anders, ed. Whirligigs: Design and construction. 2nd ed. Radnor, Pa: Chilton Book Co., 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Liddell, Louise A. Apparel: Design, textiles & construction. Frankfort, Ill: Goodheart-Willcox, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Brooches Design and construction"

1

Maisel, Jordana L., Edward Steinfeld, Megan Basnak, Korydon Smith, and M. Beth Tauke. "Construction." In Inclusive Design, 97–124. New York : Routledge, 2017. | Series: PocketArchitecture : technical design series: Routledge, 2017. http://dx.doi.org/10.4324/9781315712437-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Chappell, David. "Design." In Construction Contracts, 90–102. Fourth edition. | Abingdon, Oxon; New York: Routledge, 2021.: Routledge, 2020. http://dx.doi.org/10.1201/9781003080930-10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Chappell, David. "Design." In Construction Contracts, 90–102. Fourth edition. | Abingdon, Oxon; New York: Routledge, 2021.: Routledge, 2020. http://dx.doi.org/10.4324/9781003080930-10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Beadnall, Stuart, and Simon Moore. "Design risk." In Offshore Construction, 47–72. 2nd ed. London: Informa Law from Routledge, 2021. http://dx.doi.org/10.4324/9780367855574-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mosley, W. H., J. H. Bungey, and R. Hulse. "Composite construction." In Reinforced Concrete Design, 350–73. London: Macmillan Education UK, 1999. http://dx.doi.org/10.1007/978-1-349-14911-7_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

McLean, Will, and Pete Silver. "Construction Technology." In Environmental Design Sourcebook, 66–97. London: RIBA Publishing, 2021. http://dx.doi.org/10.4324/9781003189046-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Houben, Hugo, and Hubert Guillard. "10. Design Guidelines." In Earth Construction, 244–303. Rugby, Warwickshire, United Kingdom: Practical Action Publishing, 1989. http://dx.doi.org/10.3362/9781780444826.010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Soutsos, Marios, and Peter Domone. "Concrete mix design." In Construction Materials, 249–58. Fifth edition. | Boca Raton : CRC Press, [2017]: CRC Press, 2017. http://dx.doi.org/10.1201/9781315164595-25.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Dodd, Graham. "Design and applications." In Construction Materials, 453–58. Fifth edition. | Boca Raton : CRC Press, [2017]: CRC Press, 2017. http://dx.doi.org/10.1201/9781315164595-45.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Delligatti, T. M. "Preparing for Construction." In Costume Design, 88–120. New York, NY : Routledge, 2021. | Series: The basics: Routledge, 2020. http://dx.doi.org/10.4324/9780429354304-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Brooches Design and construction"

1

Meng Zhang. "Digital construction—construction research in virtual space." In Conceptual Design (CAID/CD). IEEE, 2008. http://dx.doi.org/10.1109/caidcd.2008.4730652.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Adams, Brian K., John A. Heath, and Gary B. Lineback. "Guideway Design and Construction." In 12th International Conference of Automated People Movers. Reston, VA: American Society of Civil Engineers, 2009. http://dx.doi.org/10.1061/41038(343)37.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gatton, Thomas M., and L. T. Boyer. "Design for Automated Construction." In 5th International Symposium on Automation and Robotics in Construction. International Association for Automation and Robotics in Construction (IAARC), 1988. http://dx.doi.org/10.22260/isarc1988/0076.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hassan, Hasnanywati, Nooriati Taib, and Zainurul Abdul Rahman. "Virtual Design and Construction." In the 2nd International Conference. New York, New York, USA: ACM Press, 2018. http://dx.doi.org/10.1145/3193025.3193062.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Wu, Cailan, Weixiao Cui, Chengzhi Zhang, Huaijian Li, and Hongliang Yan. "Design and Construction Technologies." In 2010 Joint Rail Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/jrc2010-36217.

Full text
Abstract:
Combining with the actual situation of China’s railway construction, this paper introduces the key technologies of design and construction of high-speed railway, such as the scheme optimization of subgrade, bridge and tunnel, technical standard, deformation control, advance geology forecast and settlement observation, etc. It also discusses the design and construction problems on the slab layout and interface of CRTS II slab track on bridge section, switch area, subgrade area and the transition with different track structures.
APA, Harvard, Vancouver, ISO, and other styles
6

Gransberg, Douglas D., and Keith R. Molenaar. "Life Cycle Design Criteria for Design-Build Transportation Projects." In Construction Research Congress 2003. Reston, VA: American Society of Civil Engineers, 2003. http://dx.doi.org/10.1061/40671(2003)86.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Shrestha, Pramen P., and Nirajan Mani. "Impact of Design Cost on Design Bid Build Project Performance." In Construction Research Congress 2012. Reston, VA: American Society of Civil Engineers, 2012. http://dx.doi.org/10.1061/9780784412329.158.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kalach, Mayssa, Issam Srour, and Mohamed-Asem Abdul-Malak. "Envisioned Roles of BIM for Design Delivery under Design-Build Projects." In Construction Research Congress 2018. Reston, VA: American Society of Civil Engineers, 2018. http://dx.doi.org/10.1061/9780784481264.054.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

FRANKLIN, H. "Construction issues on the moon." In Aerospace Design Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1992. http://dx.doi.org/10.2514/6.1992-1033.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Tian, Fenglan, and Donghai Bai. "Construction Design and Maintenance Measures for Underground Concrete Construction." In International Conference on Information System and Management Engineering. SCITEPRESS - Science and and Technology Publications, 2016. http://dx.doi.org/10.5220/0006444701030106.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Brooches Design and construction"

1

CORPS OF ENGINEERS WASHINGTON DC. Construction: Design and Construction Evaluation (DCE). Fort Belvoir, VA: Defense Technical Information Center, February 1996. http://dx.doi.org/10.21236/ada404141.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Slocum, Alexander H., Laura A. Demsetz, David H. Levy, and Bruce Schena. Design Methodology for Automated Construction Machines. Fort Belvoir, VA: Defense Technical Information Center, December 1987. http://dx.doi.org/10.21236/ada207386.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Fanella, David A., Amaldo T. Derecho, and S. K. Ghosh. Design and construction of structural systems. Gaithersburg, MD: National Institute of Standards and Technology, 2005. http://dx.doi.org/10.6028/nist.ncstar.1-1av1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Collins, James J. Design and Construction of Genetic Applets. Fort Belvoir, VA: Defense Technical Information Center, May 2003. http://dx.doi.org/10.21236/ada417910.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Jackson, J. G. Y-12 Sustainable Design Principles for Building Design and Construction. Office of Scientific and Technical Information (OSTI), November 2008. http://dx.doi.org/10.2172/969028.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

CORPS OF ENGINEERS WASHINGTON DC. Engineering and Design. Construction with Large Stone. Fort Belvoir, VA: Defense Technical Information Center, October 1990. http://dx.doi.org/10.21236/ada402849.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

McNeese, L. E. ORNL engineering design and construction reengineering report. Office of Scientific and Technical Information (OSTI), January 1998. http://dx.doi.org/10.2172/631227.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Janet E.R. Mcllvaine, David Beal, and Philip Fairey. INTERIOR DUCT SYSTEM DESIGN, CONSTRUCTION, AND PERFORMANCE. Office of Scientific and Technical Information (OSTI), October 2001. http://dx.doi.org/10.2172/823970.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Schwartztrauber, K. Modular Design/Phased Construction Alternative Evaluation Report. Office of Scientific and Technical Information (OSTI), May 1999. http://dx.doi.org/10.2172/763136.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Deschamps, Richard, Christopher Hynes, and Philippe Bourdeau. Embankment Widening Design Guidelines and Construction Procedures. West Lafayette, IN: Purdue University, 1999. http://dx.doi.org/10.5703/1288284313202.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Brooches Design and construction' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography