Academic literature on the topic 'Bonding interphase'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Bonding interphase.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Bonding interphase":
Zhu, Guangxiang, Qian Feng, Jinshan Yang, Jianbao Hu, Hongda Wang, Yudong Xue, Qingliang Shan, and Shaoming Dong. "Effect of BNNTs/matrix interface tailoring on toughness and fracture morphology of hierarchical SiCf/SiC composites." Journal of Advanced Ceramics 8, no. 4 (December 2019): 555–63. http://dx.doi.org/10.1007/s40145-019-0338-0.
He, Qian, Tianyi Zhan, Haiyang Zhang, Zehui Ju, Lu Hong, Nicolas Brosse, and Xiaoning Lu. "Comparison of Bonding Performance Between Plywood and Laminated Veneer Lumber Induced by High Voltage Electrostatic Field." MATEC Web of Conferences 275 (2019): 01013. http://dx.doi.org/10.1051/matecconf/201927501013.
Zanjani, Jamal Seyyed Monfared, and Ismet Baran. "Co-Bonded Hybrid Thermoplastic-Thermoset Composite Interphase: Process-Microstructure-Property Correlation." Materials 14, no. 2 (January 8, 2021): 291. http://dx.doi.org/10.3390/ma14020291.
Zanjani, Jamal Seyyed Monfared, and Ismet Baran. "Co-Bonded Hybrid Thermoplastic-Thermoset Composite Interphase: Process-Microstructure-Property Correlation." Materials 14, no. 2 (January 8, 2021): 291. http://dx.doi.org/10.3390/ma14020291.
Erartsin, Ozan, Jamal Zanjani, and Ismet Baran. "Bond Strength of Co-Bonded Thermoplastic Leading Edge Protection (LEP): The Effect of Processing-Driven Interphase Morphology." Key Engineering Materials 926 (July 22, 2022): 1786–94. http://dx.doi.org/10.4028/p-65fvc8.
Chen, Ming Wei, Hai Peng Qiu, Jian Jiao, Xiu Qian Li, Yu Wang, and Hao Zou. "Preparation of High Performance SiCf/SiC Composites through PIP Process." Key Engineering Materials 544 (March 2013): 43–47. http://dx.doi.org/10.4028/www.scientific.net/kem.544.43.
Sarwar, M. I., and Z. Ahmad. "Interphase bonding in organic–inorganic hybrid materials using aminophenyltrimethoxysilane." European Polymer Journal 36, no. 1 (January 2000): 89–94. http://dx.doi.org/10.1016/s0014-3057(99)00046-4.
Aggelis, D. G., D. Kleitsa, and T. E. Matikas. "Ultrasonic Characterization of the Fiber-Matrix Interfacial Bond in Aerospace Composites." Scientific World Journal 2013 (2013): 1–8. http://dx.doi.org/10.1155/2013/154984.
Trumble, K. P. "Electron Microscopy studies of spinel interphase formation at the Ni/Al2O3 interface." Proceedings, annual meeting, Electron Microscopy Society of America 47 (August 6, 1989): 554–55. http://dx.doi.org/10.1017/s0424820100154743.
Erartsın, Ozan, Jamal Sayyed Monfared Zanjani, and Ismet Baran. "Thermoset/Thermoplastic Interphases: The Role of Initiator Concentration in Polymer Interdiffusion." Polymers 14, no. 7 (April 6, 2022): 1493. http://dx.doi.org/10.3390/polym14071493.
Dissertations / Theses on the topic "Bonding interphase":
Boufaida, Zakariya. "Analyse des propriétés mécaniques de composites taffetas verre/matrice acrylique en relation avec les propriétés d’adhésion des fibres sur la matrice." Thesis, Université de Lorraine, 2015. http://www.theses.fr/2015LORR0108/document.
This thesis is devoted to the characterization and the analysis of the mechanical properties of composite materials made of a plain weave glass fiber reinforcement and an acrylic resin (Elium®). Before the commercialization of the Elium resin in 2013, acrylics polymers were not used in the composite industry. In the experimental part of this thesis, we mainly focused on the sizing effect (surface treatment of the fibers to enhance the bonding between the matrix and the fibers) on the mechanical behavior of our composites. The characterizations were carried out through classical macroscopic mechanical tests (tensile, bending, shearing…) but using metrological tools for local analysis (full-field strain measurements, X ray micro-tomography, Scanning Electron Microscopy, Nano-indentation etc.). We were able to study strain and damage phenomena at local scales. Fatigue properties of the sizing were highlighted by heat build-up experiments. To analyze these measurements, an original data treatment has been developed which makes clear the benefit of an acrylic sizing in order to enhance the bonding between glass fibers and our acrylic matrix. In the theoretical part of this thesis, we studied the mechanical behaviour of our glass fiber plain weave/acrylic resin composite through a numerical simulation based on the CraFT spectral solver (Composite response and Fourier Transforms). Local stress and strain fields were obtained at the mesoscopic scale. The strain field analysis shows a periodic structure induced by the presence of the plain weave reinforcement. By a quantitative study, a good agreement between the numerical strain field obtained by CraFT and the 3D-DIC experimental strain measurements was found. The numerical stress field analysis reveals regions were a high local stress occurs. Comparing with X ray micro-tomography observationsof the internal structure of previously loaded composite sampleswe noticed that the damages occurring inside the mesostructure are totally correlated with the local stress concentration revealed by CraFT numerical simulations
Chanson, Charlotte. "Optimisation de la liaison interfaciale dans les composites à matrice céramique renforcés par des fibres Hi-Nicalon S." Thesis, Bordeaux, 2015. http://www.theses.fr/2015BORD0222.
Mechanical properties of ceramic composites can be improved by controlling interfacial bonding and choosing materials. To enhance interfacial bonding, treatment on the last SiC fiber, Hi-Nicalon S surface are proposed in this work. The aim is to allow chemical and/or mechanical bonds mainly with BN interphase. For this, composites models, minicomposites are elaborated by CVI (Chemical Vapor Infiltration). Quantification of the strength of interfacial bonding is based by evaluating interfacial bonding energy Gci with tensile tests, and by calculating interfacial shear stress τ with push-out tests. Firstly, Hi-Nicalon S fibers whose surfaces have been slightly modified have been tested with classic interphase PyC. Interfacial bonding on minicomposites is weak. Different treatments have been performed on surface fibers to enhance interfacial bonding with BN, which have a better resistance oxidation than PyC. Before, elaboration parameters of BN interphase have been studied
He, Qian. "Étude sur le mécanisme d'activation du bois/bambou/adhésif et amélioration du collage induit par le champ électrique à haute tension." Electronic Thesis or Diss., Université de Lorraine, 2021. http://www.theses.fr/2021LORR0147.
In this study, the advanced equipments were selected in order to investigate the effects of HVEF on the physicochemical properties of wood and bamboo, the effects of HVEF on the chemical structure and rheological properties of adhesives under a series of HVEF parameters. The aggregation effect of adhesive at bonding interface induced by HVEF has also been revealed and the micro-mechanical prediction model is established.The main conclusions of this study are as follows:1.After HVEF treatment, the surface activity of wood and bamboo increased significantly. Moreover, with the increase of voltage/time, the surface free radicals, O/C ratio and the number of oxygen groups increased significantly while the contact angle decreased. Under the condition of 60kV, the surface activity highly increased. The increment of free radicals was 26%, the decrease of initial contact angle was 22%, the decrease of equilibrium contact angle was 23%, the increment of free energy component was 43% ~ 75%, the increment of O/C ratio was 34%, the increment of oxygen-containing groups were 39% (C‒OH), 149% (C‒O or C=O) and 97% (O‒C=O), respectively. Therefore, under HVEF treatment, the physical and chemical properties of wood and bamboo can be significantly improved, which is conducive to improving the interphase properties of composite materials.2.With the increase of voltage/time, significantly improved inter-molecular reactions of urea formaldehyde resin and phenol formaldehyde resin were obtained. After 60kV/8 min treatment, significant increment of the characteristic peaks of C‒O groups were obtained. Under HVEF treatment, the temperature/frequency dependence of the rheological behaviors of the two resins changed significantly. Therefore, the degree of inter-molecular polymerization of phenol formaldehyde and urea formaldehyde resin can be significantly improved and the viscoelasticity of the resin can be improved under HVEF treatment.3.After HVEF treatment, the distribution of adhesive at the bonding interphase was continuous and uniform. The penetration depth was significantly reduced. The density and bonding strength at the bonding interphase were significantly increased, and the delamination rate was reduced. After treatment, the maximal density at interphase is 1081 kg/m3, which was 32% higher than the control. The bonding strength increased from 0.66MPa to 1.25MPa and the wood breaking rate increased to 85%, and the delamination rate decreased to 5.97%. For bamboo material, the bonding strength was significantly improved after HVEF treatment. The bonding strength of bamboo skin and bamboo skin was 9.51MPa, and the bamboo failure ratio was 60%. In the combination of bamboo pith and bamboo pith, the maximum bamboo failure ratio was 85%, which was increased by 70%. Therefore, under HVEF treatment, the continuous and uniform distribution of bonding interphase adhesives can be obtained, which can significantly improve the bonding performance of wood bamboo composite, and is conducive to the efficient utilization of wood bamboo composite.4. According to the vertical density profile at the bonding interface, the laminated stiffness and stress distribution model of the bonding interface has been established. The results showed that the relative error was less than ±15%. Based on the distribution model, the macroscopic mechanical properties of composite are predicted with the combination of composite mechanics and laminated plate theory, including elastic modulus, bending strength, shear modulus and shear strength. The results showed that the prediction error of mechanical properties is less than 30%. With the stiffness and strength distribution model, the effect of HVEF treatment can be quantitatively characterized and the mechanical properties of HVEF treated composites can be predicted. As a result, strengthening mechanism of bonding interphase can be revealed with the the stiffness and strength distribution model
Siryabe, Emmanuel. "Evaluation non destructive par ultrasons de l'adhésion aux interfaces de joints collés." Thesis, Bordeaux, 2016. http://www.theses.fr/2016BORD0427/document.
The aim of this thesis is to develop NDT ultrasonic methods for the evaluation of the adhesion at interfaces in bonded joints.To address this problem, the assemblies are made of aluminum substrates (isotropic, elastic) and epoxy adhesive (isotropic,viscoelastic). Depending on the geometry of the studied assemblies, two methods are proposed to obtain quantitativeinformation on the adhesion level. The first method is suitable for three-layered plate-like samples. It consists in analyzingthe transmission of bulk ultrasonic plane waves through the assembly immersed in water. The consequences of a inapropriatesurface treatment of the substrates on the measurement of viscoelastic moduli of the joint are studied. It has been shown thatdegraded interphases cause an apparent anisotropy of the measured elastic moduli of the joint. This anisotropy was quantifiedusing two parameters β1 and β2 whose values can reveal the quality of the interphases. Then, the elastic moduli (or stiffnesseskL and kT) of the interphases were estimated, assuming that the adhesive layer properties are known. It was shown that theirvalues are higher when the adhesion is nominal, and are strongly decreased when the adhesion is degraded. Measurements ofthe mechanical strength, on samples prepared under the same conditions, confirmed the drops in these elastic moduli. Thesecond method is more suitable for lap joint samples. It is based on the Lamb wave transmission coefficient measured fromone substrate to the other, across the overlap zone. A numerical sensitivity analysis (finite element model) of the transmissioncoefficients of Lamb waves showed that the mechanical properties of the interphases (modeled by interfacial stiffnesses) canbe evaluated if the other characteristics of the assembly are well known. Experimental measurements of the transmissioncoefficients were then performed on two samples. One of them has interphases with nominal adhesion and the other hasdegraded interphases. A comparison between the measured results obtained for the different modes and numericalsimulations was used to determine the values of the interfacial stiffnesses for each sample. Again, it was observed that pooradhesion leads to low values of the interfacial stiffnesses of the interphases, that can be quantified using guided ultrasonicwaves
"Nano-Bonding of Silicon Oxides-based surfaces at Low Temperature: Bonding Interphase Modeling via Molecular Dynamics and Characterization of Bonding Surfaces Topography, Hydro-affinity and Free Energy." Doctoral diss., 2011. http://hdl.handle.net/2286/R.I.14366.
Dissertation/Thesis
Ph.D. Physics 2011
Book chapters on the topic "Bonding interphase":
Horiuchi, Shin, Nao Terasaki, and Takayuki Miyamae. "Introduction—Interfaces in Adhesion and Adhesive Bonding." In Interfacial Phenomena in Adhesion and Adhesive Bonding, 1–15. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-4456-9_1.
Zaldivar, Rafael J., and Hyun I. Kim. "Improved Nanofiller-Matrix Bonding and Distribution in GnP-reinforced Polymer Nanocomposites by Surface Plasma Treatments of GnP." In Interface/Interphase in Polymer Nanocomposites, 171–89. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119185093.ch5.
Malinowski, Paweł H., Tomasz Wandowski, Wiesław M. Ostachowicz, Maxime Sagnard, Laurent Berthe, Romain Ecault, Igor Solodov, Damien Segur, and Marc Kreutzbruck. "Extended Non-destructive Testing for the Bondline Quality Assessment of Aircraft Composite Structures." In Adhesive Bonding of Aircraft Composite Structures, 223–57. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-319-92810-4_4.
Wei, Yue-Zhen, Zhi-Qian Zhang, Yin Li, Zi-hai Guo, and Bai-Ling Zheng. "A Study of the Interfical Bonding Between Carbon Fibre and PMR-15 Resin." In Controlled Interphases in Composite Materials, 167–74. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-011-7816-7_16.
Ikuta, N., Z. Maekawa, H. Hamada, H. Ichihashi, E. Nishio, and I. Abe. "Effect of Silane Bonding State on Interfacial Strength in Glass Fiber-Epoxy Composites." In Controlled Interphases in Composite Materials, 757–66. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-011-7816-7_72.
Trumble, Kevin P., and Manfred Rühle. "THE OXYGEN ACTIVITY DEPENDENCE OF SPINEL INTERPHASE FORMATION DURING Ni/Al2O3 DIFFUSION BONDING." In Metal–Ceramic Interfaces, 144–51. Elsevier, 1990. http://dx.doi.org/10.1016/b978-0-08-040505-6.50023-4.
Fadzullah, S. H. Sheikh Md, and Zaleha Mustafa. "Fabrication and Processing of Pineapple Leaf Fiber Reinforced Composites." In Materials Science and Engineering, 876–93. IGI Global, 2017. http://dx.doi.org/10.4018/978-1-5225-1798-6.ch035.
Barthés-Labrousse, M. G., D. Mercier, and F. Debontridder. "FORMATION OF THE INTERPHASE IN EPOXY-AMINE/ALUMINIUM JOINTS: FROM SURFACE CORROSION TO METAL BONDING." In Surface Properties and Engineering of Complex Intermetallics, 265–91. WORLD SCIENTIFIC, 2010. http://dx.doi.org/10.1142/9789814304771_0009.
Chopra, Swamini, S. Sreya, Rohit V. Babhulkar, Swaksha P. Halde, Kavita A. Deshmukh, and D. R. Peshwe. "Cryogenic Treatment of Polymer/MWCNT Nano-Composites for Mechanical and Tribological Applications." In Nanotechnology in Aerospace and Structural Mechanics, 103–61. IGI Global, 2019. http://dx.doi.org/10.4018/978-1-5225-7921-2.ch004.
Yang, J., and A. Garton. "Interphases in the Adhesive Bonding of Fluoropolymers *." In Adhesion International 1993, 357–68. CRC Press, 2020. http://dx.doi.org/10.1201/9780367813734-29.
Conference papers on the topic "Bonding interphase":
Nargund, Shrikant. "Evaluation of Stress Wave Attenuation in a Polymer Matrix Composite Using Finite Element Analysis Technique." In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-67055.
Cech, Vladimir, Adam Babik, Antonin Knob, and Erik Palesch. "Plasma polymers used for controlled interphase in polymer composites." In 13th International Conference on Plasma Surface Engineering September 10 - 14, 2012, in Garmisch-Partenkirchen, Germany. Linköping University Electronic Press, 2013. http://dx.doi.org/10.3384/wcc2.51-55.
Asanuma, Hiroshi, Mitsuji Hirohashi, Kentarou Ichikawa, and Hao Du. "Fabrication of fiber-reinforced aluminum smart composites with optical fiber by the interphase forming/bonding method." In Smart Structures & Materials '95, edited by William B. Spillman, Jr. SPIE, 1995. http://dx.doi.org/10.1117/12.207694.
Charteau, Mélanie, Véronique Gauthier-Brunet, Valérie Audurier, Jean-François Silvain, and Anne Joulain. "Study Of The Mechanical Properties Of A Cu/CF Composite With Zrc Interphase." In Euro Powder Metallurgy 2023 Congress & Exhibition. EPMA, 2023. http://dx.doi.org/10.59499/ep235754770.
VENKATACHALAM,, VINOTHINI, JON BINNER, THOMAS REIMER, BUCKARD ESSER, STEFANO MUNGIGUERRA, and RAFFAELE SAVINO. "PROCESSING OF ULTRA-HIGH TEMPERATURE CERAMIC MATRIX COMPOSITES (UHTCMCS) THROUGH RF ENHANCED CHEMICAL VAPOUR INFILTRATION (RF-CVI)." In Thirty-sixth Technical Conference. Destech Publications, Inc., 2021. http://dx.doi.org/10.12783/asc36/35775.
Ghasemi-Nejhad, Mehrdad N. "Multifunctional Hierarchical Nanocomposites: A Review." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-65599.